bherbruckandClaude Opus 5.5
843c548589
* Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu) Sketch geometry had no copy or paste: Ctrl+C / Ctrl+X / Ctrl+V arrive as clipboard events that nothing handled, and the sketch context menu had no Copy, Cut or Paste. - sketch.copy / sketch.cut / sketch.paste: lines, arcs, circles, ellipses, splines, conics, points and text. Constraints and dimensions wholly among the copied entities come along (each dimension gets its own parameter with the same expression); ones that reach outside, fixes and pattern or offset relations are dropped. Paste goes centred at `at`, by `translate`, or offset from the original (same sketch) / at the same coordinates (another sketch, on its plane). One undo step; the pasted geometry is selected. - Ctrl+C / Ctrl+X / Ctrl+V in a sketch (paste at the cursor), and Cut, Copy and Paste in the sketch context menu. Outside a sketch Ctrl+C / Ctrl+V copy and paste the selected timeline features. A copy also puts a line of text on the system clipboard so the next Ctrl+V is delivered. Fixes #1480 Co-Authored-By: Claude Opus 5.5 <[email protected]> * Keep a pasted text's height and angle expressions, drop its place's Co-Authored-By: Claude Opus 5.5 <[email protected]> --------- Co-authored-by: Claude Opus 5.5 <[email protected]>
23 KiB
23 KiB
Features
SolidCraft's commands by area, generated by cargo xtask features from the command registry (solidcraft-cli commands). 373 commands. Planned (registered, not built yet): 3. Every command runs the same way from the toolbar, a script, solidcraft-cli exec <id> '<json>', the control channel and MCP; parameters are in the command reference (cargo xtask book). Status and plans: ROADMAP.
Sketch (102)
| Command | Id | Toolbar |
|---|---|---|
| Create Sketch | sketch.create |
SOLID › CREATE |
| Edit Sketch | sketch.edit |
– |
| Finish Sketch | sketch.finish |
SKETCH › FINISH SKETCH |
| Line (L) | sketch.line |
SKETCH › CREATE |
| Draw Dimensioned Sketch Geometry | sketch.draw.dimensioned |
– |
| 2-Point Rectangle (R) | sketch.rectangle.two_point |
SKETCH › CREATE |
| 3-Point Rectangle | sketch.rectangle.three_point |
SKETCH › CREATE |
| Rounded Rectangle | sketch.rectangle.rounded |
SKETCH › CREATE |
| Center Rectangle | sketch.rectangle.center |
SKETCH › CREATE |
| Center Diameter Circle (C) | sketch.circle.center |
SKETCH › CREATE |
| 2-Point Circle | sketch.circle.two_point |
SKETCH › CREATE |
| 3-Point Circle | sketch.circle.three_point |
SKETCH › CREATE |
| 3-Point Arc | sketch.arc.three_point |
SKETCH › CREATE |
| Center Point Arc | sketch.arc.center_point |
SKETCH › CREATE |
| Inscribed Polygon | sketch.polygon.inscribed |
SKETCH › CREATE |
| Circumscribed Polygon | sketch.polygon.circumscribed |
SKETCH › CREATE |
| Edge Polygon | sketch.polygon.edge |
SKETCH › CREATE |
| Center to Center Slot | sketch.slot.center_to_center |
SKETCH › CREATE |
| Overall Slot | sketch.slot.overall |
SKETCH › CREATE |
| Point | sketch.point |
SKETCH › CREATE |
| Sketch Dimension (D) | sketch.dimension |
SKETCH › CREATE |
| Horizontal/Vertical | sketch.constraint.horizontal_vertical |
SKETCH › CONSTRAINTS |
| Coincident | sketch.constraint.coincident |
SKETCH › CONSTRAINTS |
| Tangent | sketch.constraint.tangent |
SKETCH › CONSTRAINTS |
| Equal | sketch.constraint.equal |
SKETCH › CONSTRAINTS |
| Parallel | sketch.constraint.parallel |
SKETCH › CONSTRAINTS |
| Perpendicular | sketch.constraint.perpendicular |
SKETCH › CONSTRAINTS |
| Fix/UnFix | sketch.constraint.fix |
SKETCH › CONSTRAINTS |
| MidPoint | sketch.constraint.midpoint |
SKETCH › CONSTRAINTS |
| Concentric | sketch.constraint.concentric |
SKETCH › CONSTRAINTS |
| Collinear | sketch.constraint.collinear |
SKETCH › CONSTRAINTS |
| Symmetry | sketch.constraint.symmetry |
SKETCH › CONSTRAINTS |
| Normal/Construction (X) | sketch.construction |
SKETCH › CREATE |
| Delete Sketch Entities | sketch.delete |
– |
| Drag Sketch Point | sketch.move_point |
– |
| Drag Sketch Geometry | sketch.drag |
– |
| End Sketch Drag | sketch.drag_end |
– |
| Move Dimension Text | sketch.dimension_text |
– |
| Sketch Palette Options | sketch.options |
– |
| Chain | sketch.chain |
– |
| Solve Sketch | sketch.solve |
– |
| Midpoint Line | sketch.line.midpoint |
SKETCH › CREATE |
| Tangent Arc | sketch.arc.tangent |
SKETCH › CREATE |
| 2-Tangent Circle | sketch.circle.two_tangent |
SKETCH › CREATE |
| 3-Tangent Circle | sketch.circle.three_tangent |
SKETCH › CREATE |
| Center Point Slot | sketch.slot.center_point |
SKETCH › CREATE |
| Three Point Arc Slot | sketch.slot.arc_three_point |
SKETCH › CREATE |
| Center Point Arc Slot | sketch.slot.arc_center |
SKETCH › CREATE |
| Ellipse | sketch.ellipse |
SKETCH › CREATE |
| Fit Point Spline | sketch.spline.fit_point |
SKETCH › CREATE |
| Control Point Spline | sketch.spline.control_point |
SKETCH › CREATE |
| Control Point Spline (Degree 5) | sketch.spline.control_point_5 |
SKETCH › CREATE |
| Conic Curve | sketch.conic |
SKETCH › CREATE |
| Blend Curve | sketch.blend_curve |
SKETCH › MODIFY |
| Centerline | sketch.centerline |
SKETCH › CREATE |
| Text | sketch.text |
SKETCH › CREATE |
| Edit Text | sketch.edit_text |
– |
| Curvature | sketch.constraint.curvature |
SKETCH › CONSTRAINTS |
| Polygon | sketch.constraint.polygon |
SKETCH › CONSTRAINTS |
| AutoConstrain | sketch.auto_constrain |
SKETCH › CONSTRAINTS |
| AutoConstrain from datum | sketch.auto_constrain_from_datum |
SKETCH › CONSTRAINTS |
| Finish with AutoConstrain | sketch.finish_auto_constrain |
SKETCH › FINISH SKETCH |
| Sketch Constrainer | sketch.constrainer |
SKETCH › CREATE |
| Toggle Driven Dimension | sketch.toggle_driven |
– |
| Constraint Glyphs | sketch.glyphs |
– |
| Snap Inference | sketch.snap |
– |
| Insert DXF | sketch.insert_dxf |
SKETCH › INSERT |
| Insert SVG | sketch.insert_svg |
SKETCH › INSERT |
| Save As DXF | sketch.export_dxf |
– |
| 3D Line | sketch.line3d |
– |
| 3D Spline | sketch.spline3d |
– |
| 3D Point | sketch.point3d |
– |
| Move 3D Point | sketch.move3d |
– |
| Fillet | sketch.fillet |
SKETCH › MODIFY |
| Equal Distance Chamfer | sketch.chamfer.equal_distance |
SKETCH › MODIFY |
| Distance and Angle Chamfer | sketch.chamfer.distance_angle |
SKETCH › MODIFY |
| Two Distance Chamfer | sketch.chamfer.two_distance |
SKETCH › MODIFY |
| Offset (O) | sketch.offset |
SKETCH › MODIFY |
| Break Offset Association | sketch.offset.break |
– |
| Trim (T) | sketch.trim |
SKETCH › MODIFY |
| Extend | sketch.extend |
SKETCH › MODIFY |
| Break | sketch.break |
SKETCH › MODIFY |
| Sketch Scale | sketch.scale |
SKETCH › MODIFY |
| Move/Copy Sketch Entities | sketch.move |
SKETCH › MODIFY |
| Mirror | sketch.mirror |
SKETCH › CREATE |
| Circular Pattern | sketch.pattern.circular |
SKETCH › CREATE |
| Rectangular Pattern | sketch.pattern.rectangular |
SKETCH › CREATE |
| Project (P) | sketch.project |
SKETCH › CREATE |
| Intersect | sketch.intersect |
SKETCH › CREATE |
| Include 3D Geometry | sketch.include_3d |
SKETCH › CREATE |
| Project To Surface | sketch.project_to_surface |
SKETCH › CREATE |
| Intersection Curve | sketch.intersection_curve |
SKETCH › CREATE |
| Spun Profile | sketch.spun_profile |
SKETCH › CREATE |
| Isoparametric Curve | sketch.isoparametric_curve |
SKETCH › CREATE |
| Fit Curves to Mesh Section | sketch.fit_curves_to_section |
SKETCH › CREATE |
| Break Link | sketch.break_link |
– |
| Auto-Project Edges on Reference | sketch.auto_project |
– |
| Redefine Sketch Plane | sketch.redefine |
– |
| Copy Sketch Entities | sketch.copy |
– |
| Cut Sketch Entities | sketch.cut |
– |
| Paste Sketch Entities | sketch.paste |
– |
| Inspect Sketch | sketch.inspect |
– |
Solid modelling (35)
| Command | Id | Toolbar |
|---|---|---|
| Extrude (E) | solid.extrude |
SOLID › CREATE |
| Revolve | solid.revolve |
SOLID › CREATE |
| Sweep | solid.sweep |
SOLID › CREATE |
| Loft | solid.loft |
SOLID › CREATE |
| Box | solid.box |
SOLID › CREATE |
| Cylinder | solid.cylinder |
SOLID › CREATE |
| Sphere | solid.sphere |
SOLID › CREATE |
| Torus | solid.torus |
SOLID › CREATE |
| Fillet (F) | solid.fillet |
SOLID › MODIFY |
| Chamfer | solid.chamfer |
SOLID › MODIFY |
| Combine | solid.combine |
SOLID › MODIFY |
| Rectangular Pattern | solid.pattern.rectangular |
SOLID › CREATE |
| Circular Pattern | solid.pattern.circular |
SOLID › CREATE |
| Pattern on Path | solid.pattern.path |
SOLID › CREATE |
| Mirror | solid.mirror |
SOLID › CREATE |
| Hole (H) | solid.hole |
SOLID › CREATE |
| Pipe | solid.pipe |
SOLID › CREATE |
| Bounding Solid | solid.bounding_solid |
SOLID › CREATE |
| Scale | solid.scale |
SOLID › MODIFY |
| Offset Face | solid.offset_face |
SOLID › MODIFY |
| Thread | solid.thread |
SOLID › CREATE |
| Shell | solid.shell |
SOLID › MODIFY |
| Draft | solid.draft |
SOLID › MODIFY |
| Split Face | solid.split_face |
SOLID › MODIFY |
| Split Body | solid.split_body |
SOLID › MODIFY |
| Press Pull (Q) | solid.press_pull |
SOLID › MODIFY |
| Move/Copy (M) | solid.move |
SOLID › MODIFY |
| Boundary Fill | solid.boundary_fill |
SOLID › CREATE |
| Coil | solid.coil |
SOLID › CREATE |
| Rib | solid.rib |
SOLID › CREATE |
| Web | solid.web |
SOLID › CREATE |
| Emboss | solid.emboss |
SOLID › CREATE |
| Replace Face | solid.replace_face |
SOLID › MODIFY |
| Align | solid.align |
SOLID › MODIFY |
| Remove | solid.remove |
SOLID › MODIFY |
Surfaces (15, 2 planned)
| Command | Id | Toolbar |
|---|---|---|
| Patch | surface.patch |
SURFACE › CREATE |
| Stitch | surface.stitch |
SURFACE › MODIFY |
| Thicken | surface.thicken |
SURFACE › CREATE |
| Extend | surface.extend |
SURFACE › MODIFY |
| Trim | surface.trim |
SURFACE › MODIFY |
| Surface Extrude | surface.extrude |
SURFACE › CREATE |
| Surface Revolve | surface.revolve |
SURFACE › CREATE |
| Surface Sweep | surface.sweep |
SURFACE › CREATE |
| Surface Loft | surface.loft |
SURFACE › CREATE |
| Offset Surface | surface.offset |
SURFACE › CREATE |
| Ruled Surface | surface.ruled |
SURFACE › CREATE |
| Boundary Surface (planned: #763) | surface.boundary |
SURFACE › CREATE |
| Blend Surface | surface.blend |
SURFACE › CREATE |
| Untrim | surface.untrim |
SURFACE › MODIFY |
| Unstitch | surface.unstitch |
SURFACE › MODIFY |
| Reverse Normal | surface.reverse_normal |
SURFACE › MODIFY |
| Surface Fillet (planned: #769) | surface.fillet |
SURFACE › MODIFY |
Construction geometry (19)
| Command | Id | Toolbar |
|---|---|---|
| Offset Plane | construct.plane.offset |
SOLID › CONSTRUCT |
| Plane at Angle | construct.plane.at_angle |
SOLID › CONSTRUCT |
| Axis Through Cylinder/Cone/Torus | construct.axis.through_cylinder |
SOLID › CONSTRUCT |
| Axis Perpendicular To Face | construct.axis.normal_to_face |
SOLID › CONSTRUCT |
| Axis Through Two Planes | construct.axis.two_planes |
SOLID › CONSTRUCT |
| Axis Through Two Points | construct.axis.two_points |
SOLID › CONSTRUCT |
| Axis Through Edge | construct.axis.edge |
SOLID › CONSTRUCT |
| Point At Vertex | construct.point.vertex |
SOLID › CONSTRUCT |
| Point Through Two Edges | construct.point.two_edges |
SOLID › CONSTRUCT |
| Point Through Three Planes | construct.point.three_planes |
SOLID › CONSTRUCT |
| Point At Center Of Circle/Sphere/Torus | construct.point.center |
SOLID › CONSTRUCT |
| Point At Edge And Plane | construct.point.edge_plane |
SOLID › CONSTRUCT |
| Point Along Path | construct.point.along_path |
SOLID › CONSTRUCT |
| Midplane | construct.plane.midplane |
SOLID › CONSTRUCT |
| Plane Through Two Edges | construct.plane.two_edges |
SOLID › CONSTRUCT |
| Plane Through Three Points | construct.plane.three_points |
SOLID › CONSTRUCT |
| Tangent Plane | construct.plane.tangent |
SOLID › CONSTRUCT |
| Plane Along Path | construct.plane.along_path |
SOLID › CONSTRUCT |
| Perpendicular Plane | construct.plane.perpendicular |
SOLID › CONSTRUCT |
Sheet metal (12)
| Command | Id | Toolbar |
|---|---|---|
| Flange | sheet.flange |
SHEET METAL › CREATE |
| Perforate | sheet.perforate |
SHEET METAL › CREATE |
| Hem | sheet.hem |
SHEET METAL › CREATE |
| Fold | sheet.fold |
SHEET METAL › CREATE |
| Unfold | sheet.unfold |
SHEET METAL › MODIFY |
| Refold | sheet.refold |
SHEET METAL › MODIFY |
| Convert to Sheet Metal | sheet.convert |
SHEET METAL › CREATE |
| Sheet Metal Rules | sheet.manage_rules |
SHEET METAL › MODIFY |
| List Sheet Metal Rules | sheet.rules |
– |
| Create Flat Pattern | sheet.flat_pattern |
SHEET METAL › CREATE |
| Export Flat Pattern as DXF | sheet.export_dxf |
– |
| Export Bend Table | sheet.export_bend_table |
– |
Plastic parts (7)
| Command | Id | Toolbar |
|---|---|---|
| Boss | plastic.boss |
PLASTIC › CREATE |
| Lip | plastic.lip |
PLASTIC › CREATE |
| Snap Fit | plastic.snap_fit |
PLASTIC › CREATE |
| Rest | plastic.rest |
PLASTIC › CREATE |
| Manage Plastic Rules | plastic.manage_rules |
PLASTIC › SETUP |
| Assign Plastic Rule | plastic.assign_rule |
PLASTIC › SETUP |
| List Plastic Rules | plastic.rules |
– |
Components (17)
| Command | Id | Toolbar |
|---|---|---|
| New Component | component.create |
SOLID › ASSEMBLE |
| Create Components from Bodies | component.from_bodies |
– |
| Activate Component | component.activate |
– |
| List Components | component.list |
– |
| Component Physical Properties | component.properties |
– |
| Rename Component | component.rename |
– |
| Delete Component | component.delete |
– |
| Unlock Contents | component.unlock |
– |
| Move Bodies to Component | component.move_bodies |
– |
| Move Sketches to Component | component.move_sketches |
– |
| Paste New | component.paste_new |
– |
| Capture Position | component.capture_position |
SOLID › POSITION |
| Revert Position | component.revert_position |
SOLID › POSITION |
| Insert Design | component.insert_design |
SOLID › ASSEMBLE |
| Update Links | component.update_links |
– |
| Break Link | component.break_link |
– |
| List Links | component.links |
– |
Assembly joints (11)
| Command | Id | Toolbar |
|---|---|---|
| Joint Origin | joint.origin |
SOLID › CREATE |
| Joint (J) | joint.create |
SOLID › ASSEMBLE |
| As-Built Joint | joint.as_built |
SOLID › ASSEMBLE |
| Rigid Group | joint.rigid_group |
SOLID › ASSEMBLE |
| Drive Joints | joint.drive |
SOLID › ASSEMBLE |
| Motion Link | joint.motion_link |
SOLID › ASSEMBLE |
| Joint Limits | joint.limits |
– |
| Edit Joint | joint.edit |
– |
| Delete Joint | joint.delete |
– |
| List Joints | joint.list |
– |
| Solve Joints | joint.solve |
– |
Configurations (8)
| Command | Id | Toolbar |
|---|---|---|
| Configure | config.configure |
SOLID › CONFIGURE |
| Display Configuration Table | config.table |
SOLID › CONFIGURE |
| Configuration Column | config.column |
– |
| Configuration Row | config.row |
– |
| Activate Configuration | config.activate |
– |
| Preview Configuration | config.preview |
– |
| Configuration Rule | config.rule |
– |
| Configuration Rules | config.rules |
– |
Timeline (21)
| Command | Id | Toolbar |
|---|---|---|
| Compute All | timeline.compute_all |
SOLID › MODIFY |
| Delete (Delete) | timeline.delete |
SOLID › MODIFY |
| Rename | timeline.rename |
– |
| New Feature Folder | timeline.group |
– |
| Remove Feature Folders | timeline.ungroup |
– |
| Rename Feature Folder | timeline.rename_group |
– |
| Move Features to Folder | timeline.move_to_group |
– |
| Move Timeline Items | timeline.move_many |
– |
| Move Timeline Marker | timeline.rollback |
– |
| Roll History Marker | timeline.roll_to |
– |
| Reorder Feature | timeline.reorder |
– |
| Reorder Features | timeline.reorder_many |
– |
| Edit Feature | timeline.redefine |
– |
| Feature Dependents | timeline.dependents |
– |
| Suppress Feature | timeline.suppress |
– |
| Edit Feature | timeline.edit |
– |
| Inspect Feature | timeline.inspect |
– |
| Copy Features | timeline.copy |
– |
| Paste Features | timeline.paste |
– |
| Add Recorded Feature | timeline.add |
– |
| Export Command Script | timeline.export_script |
– |
Inspect (13, 1 planned)
| Command | Id | Toolbar |
|---|---|---|
| Curvature Comb Analysis | inspect.curvature_comb |
SKETCH › INSPECT |
| Minimum Radius Analysis | inspect.minimum_radius |
SKETCH › INSPECT |
| Isocurve Analysis | inspect.isocurve |
SKETCH › INSPECT |
| Center of Mass | inspect.center_of_mass |
SKETCH › INSPECT |
| Zebra Analysis | inspect.zebra |
SKETCH › INSPECT |
| Draft Analysis | inspect.draft |
SKETCH › INSPECT |
| Environment Map Analysis | inspect.environment_map |
SKETCH › INSPECT |
| Accessibility Analysis | inspect.accessibility |
SKETCH › INSPECT |
| Curvature Map Analysis | inspect.curvature_map |
SKETCH › INSPECT |
| Continuity Analysis (planned: #770) | inspect.continuity |
SURFACE › INSPECT |
| Interference | inspect.interference |
SOLID › INSPECT |
| Measure (I) | inspect.measure |
SOLID › INSPECT |
| Compare Bodies | inspect.compare |
– |
| Section Analysis | inspect.section |
SOLID › INSPECT |
Files (8)
| Command | Id | Toolbar |
|---|---|---|
| New Design (Ctrl+N) | file.new |
– |
| Insert STEP | file.insert_step |
SOLID › INSERT |
| Insert Mesh | file.insert_mesh |
SOLID › INSERT |
| Save (Ctrl+S) | file.save |
– |
| Save As | file.save_as |
– |
| Export | file.export |
– |
| Save As Mesh | file.save_mesh |
MESH › MODIFY |
| Installed Slicers | file.slicers |
– |
Documents (4)
| Command | Id | Toolbar |
|---|---|---|
| Open (Ctrl+O) | doc.open |
– |
| Recoverable Designs | doc.recovery_list |
– |
| Recover Design | doc.recover |
– |
| Discard Recovered Design | doc.recovery_discard |
– |
Edit (4)
| Command | Id | Toolbar |
|---|---|---|
| Undo (Ctrl+Z) | edit.undo |
– |
| Redo (Ctrl+Y) | edit.redo |
– |
| Checkpoint | edit.checkpoint |
– |
| Restore Checkpoint | edit.restore_checkpoint |
– |
appearance.* (3)
| Command | Id | Toolbar |
|---|---|---|
| Appearance (A) | appearance.assign |
SOLID › MODIFY |
| Appearance Library | appearance.library |
– |
| List Appearances | appearance.list |
– |
body.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Rename Body | body.rename |
– |
browser.* (6)
| Command | Id | Toolbar |
|---|---|---|
| New Group | browser.group |
– |
| Ungroup | browser.ungroup |
– |
| Rename Group | browser.rename_group |
– |
| Move Browser Items | browser.move |
– |
| Order Browser Items | browser.order |
– |
| Show/Hide | browser.visibility |
– |
canvas.* (5)
| Command | Id | Toolbar |
|---|---|---|
| Canvas | canvas.insert |
SKETCH › INSERT |
| Decal | canvas.decal |
SKETCH › INSERT |
| Edit Canvas | canvas.edit |
SKETCH › INSERT |
| Calibrate Canvas | canvas.calibrate |
– |
| Delete Canvas | canvas.delete |
– |
contact.* (7)
| Command | Id | Toolbar |
|---|---|---|
| Enable Contact Sets | contact.enable_sets |
SOLID › ASSEMBLE |
| Enable All Contact | contact.enable_all |
SOLID › ASSEMBLE |
| Disable Contact | contact.disable_all |
SOLID › ASSEMBLE |
| New Contact Set | contact.create |
SOLID › ASSEMBLE |
| Edit Contact Set | contact.edit |
– |
| List Contact Sets | contact.list |
– |
| Check Contact | contact.check |
– |
diagnostics.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Crash Reports | diagnostics.crash_reports |
– |
| Crash Report | diagnostics.crash_report |
– |
| Delete Crash Reports | diagnostics.crash_reports.clear |
– |
| Crash Test | diagnostics.crash_test |
– |
document.* (5)
| Command | Id | Toolbar |
|---|---|---|
| Change Design Units | document.units |
– |
| Design Properties | document.metadata |
– |
| Change Design Properties | document.metadata.set |
– |
| Remove Design Property | document.metadata.remove |
– |
| Inspect Design | document.inspect |
– |
engine.* (1)
| Command | Id | Toolbar |
|---|---|---|
| List Commands | engine.commands |
– |
explode.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Exploded View | explode.create |
SOLID › ASSEMBLE |
| Show Exploded View | explode.show |
– |
| List Exploded Views | explode.list |
– |
| Delete Exploded View | explode.delete |
– |
expr.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Evaluate Expression | expr.evaluate |
– |
face.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Delete Face | face.delete |
SOLID › MODIFY |
library.* (3)
| Command | Id | Toolbar |
|---|---|---|
| Inspect Local Library | library.inspect |
– |
| Export Design Library | library.export |
– |
| Apply Local Library Entry | library.apply |
– |
material.* (7)
| Command | Id | Toolbar |
|---|---|---|
| Physical Material | material.assign |
SOLID › MODIFY |
| List Materials | material.list |
– |
| New Physical Material | material.create |
– |
| Edit Physical Material | material.edit |
– |
| Delete Physical Material | material.delete |
– |
| Validate Physical Material Data | material.properties.validate |
– |
| Directional Elastic Modulus | material.properties.directional |
– |
mesh.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Convert Mesh | mesh.convert |
– |
model.* (3)
| Command | Id | Toolbar |
|---|---|---|
| List Edges | model.edges |
– |
| List Faces | model.faces |
– |
| List Threads | model.threads |
– |
motion.* (5)
| Command | Id | Toolbar |
|---|---|---|
| Motion Study | motion.study |
SOLID › ASSEMBLE |
| Play Motion Study | motion.play |
– |
| Export Motion Study | motion.export |
– |
| List Motion Studies | motion.list |
– |
| Delete Motion Study | motion.delete |
– |
occurrence.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Occurrence Physical Properties | occurrence.properties |
– |
| Paste (Instance) | occurrence.copy |
– |
| Move Occurrence | occurrence.move |
– |
| Ground | occurrence.ground |
– |
parameters.* (13)
| Command | Id | Toolbar |
|---|---|---|
| Change Parameters | parameters.change |
SOLID › MODIFY |
| List Parameters | parameters.list |
– |
| Add User Parameter | parameters.add |
– |
| Rename Parameter | parameters.rename |
– |
| Delete Parameter | parameters.delete |
– |
| Favourite Parameter | parameters.favorite |
– |
| Move Parameter | parameters.move |
– |
| Comment Parameter | parameters.comment |
– |
| Parameter Users | parameters.users |
– |
| Parameter Graph | parameters.graph |
– |
| Export Parameters | parameters.export |
– |
| Import Parameters | parameters.import |
– |
| Complete Expression | parameters.complete |
– |
parts.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Standard Parts | parts.library |
– |
| Insert Fastener | parts.fastener |
SOLID › INSERT |
| Insert Part | parts.insert |
– |
| Change Part Size | parts.resize |
– |
render.* (10)
| Command | Id | Toolbar |
|---|---|---|
| Check Render Request | render.preflight |
– |
| Render Image | render.start |
RENDER › IMAGE |
| Render Progress | render.status |
– |
| Cancel Render | render.cancel |
– |
| Export Render Image | render.export |
– |
| Render Backends | render.backends |
– |
| Render Settings | render.settings.get |
– |
| Save Render Settings | render.settings.set |
– |
| Inspect Render Scene | render.scene |
RENDER › SCENE |
| Apply Render Camera | render.settings.apply |
– |
select.* (2)
| Command | Id | Toolbar |
|---|---|---|
| Select | select.set |
– |
| Clear Selection | select.clear |
– |
selection.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Delete | selection.delete |
– |
view.* (6)
| Command | Id | Toolbar |
|---|---|---|
| New Named View | view.save |
– |
| Rename Named View | view.rename |
– |
| Delete Named View | view.delete |
– |
| List Named Views | view.list |
– |
| Restore Named View | view.apply |
– |
| Navigate View | view.navigate |
– |