OneCAD/docs/features.md

Features

SolidCraft's commands by area, generated by cargo xtask features from the command registry (solidcraft-cli commands). 402 commands. Planned (registered, not built yet): 1. Every command runs the same way from the toolbar, a script, solidcraft-cli exec <id> '<json>', the control channel and MCP; parameters are in the command reference (cargo xtask book). Status and plans: ROADMAP.

Sketch (103)

Command	Id	Toolbar
Create Sketch	sketch.create	SOLID › CREATE
Edit Sketch	sketch.edit	–
Finish Sketch	sketch.finish	SKETCH › FINISH SKETCH
Line (L)	sketch.line	SKETCH › CREATE
Draw Dimensioned Sketch Geometry	sketch.draw.dimensioned	–
2-Point Rectangle (R)	sketch.rectangle.two_point	SKETCH › CREATE
3-Point Rectangle	sketch.rectangle.three_point	SKETCH › CREATE
Rounded Rectangle	sketch.rectangle.rounded	SKETCH › CREATE
Center Rectangle	sketch.rectangle.center	SKETCH › CREATE
Center Diameter Circle (C)	sketch.circle.center	SKETCH › CREATE
2-Point Circle	sketch.circle.two_point	SKETCH › CREATE
3-Point Circle	sketch.circle.three_point	SKETCH › CREATE
3-Point Arc	sketch.arc.three_point	SKETCH › CREATE
Center Point Arc	sketch.arc.center_point	SKETCH › CREATE
Inscribed Polygon	sketch.polygon.inscribed	SKETCH › CREATE
Circumscribed Polygon	sketch.polygon.circumscribed	SKETCH › CREATE
Edge Polygon	sketch.polygon.edge	SKETCH › CREATE
Center to Center Slot	sketch.slot.center_to_center	SKETCH › CREATE
Overall Slot	sketch.slot.overall	SKETCH › CREATE
Point	sketch.point	SKETCH › CREATE
Sketch Dimension (D)	sketch.dimension	SKETCH › CREATE
Horizontal/Vertical	sketch.constraint.horizontal_vertical	SKETCH › CONSTRAINTS
Coincident	sketch.constraint.coincident	SKETCH › CONSTRAINTS
Tangent	sketch.constraint.tangent	SKETCH › CONSTRAINTS
Equal	sketch.constraint.equal	SKETCH › CONSTRAINTS
Parallel	sketch.constraint.parallel	SKETCH › CONSTRAINTS
Perpendicular	sketch.constraint.perpendicular	SKETCH › CONSTRAINTS
Fix/UnFix	sketch.constraint.fix	SKETCH › CONSTRAINTS
MidPoint	sketch.constraint.midpoint	SKETCH › CONSTRAINTS
Concentric	sketch.constraint.concentric	SKETCH › CONSTRAINTS
Collinear	sketch.constraint.collinear	SKETCH › CONSTRAINTS
Symmetry	sketch.constraint.symmetry	SKETCH › CONSTRAINTS
Normal/Construction (X)	sketch.construction	SKETCH › CREATE
Delete Sketch Entities	sketch.delete	–
Drag Sketch Point	sketch.move_point	–
Drag Sketch Geometry	sketch.drag	–
End Sketch Drag	sketch.drag_end	–
Move Dimension Text	sketch.dimension_text	–
Sketch Palette Options	sketch.options	–
Chain	sketch.chain	–
Solve Sketch	sketch.solve	–
Midpoint Line	sketch.line.midpoint	SKETCH › CREATE
Tangent Arc	sketch.arc.tangent	SKETCH › CREATE
2-Tangent Circle	sketch.circle.two_tangent	SKETCH › CREATE
3-Tangent Circle	sketch.circle.three_tangent	SKETCH › CREATE
Center Point Slot	sketch.slot.center_point	SKETCH › CREATE
Three Point Arc Slot	sketch.slot.arc_three_point	SKETCH › CREATE
Center Point Arc Slot	sketch.slot.arc_center	SKETCH › CREATE
Ellipse	sketch.ellipse	SKETCH › CREATE
Fit Point Spline	sketch.spline.fit_point	SKETCH › CREATE
Control Point Spline	sketch.spline.control_point	SKETCH › CREATE
Control Point Spline (Degree 5)	sketch.spline.control_point_5	SKETCH › CREATE
Conic Curve	sketch.conic	SKETCH › CREATE
Blend Curve	sketch.blend_curve	SKETCH › MODIFY
Centerline	sketch.centerline	SKETCH › CREATE
Infinite Line	sketch.infinite	–
Text	sketch.text	SKETCH › CREATE
Edit Text	sketch.edit_text	–
Curvature	sketch.constraint.curvature	SKETCH › CONSTRAINTS
Polygon	sketch.constraint.polygon	SKETCH › CONSTRAINTS
AutoConstrain	sketch.auto_constrain	SKETCH › CONSTRAINTS
AutoConstrain from datum	sketch.auto_constrain_from_datum	SKETCH › CONSTRAINTS
Finish with AutoConstrain	sketch.finish_auto_constrain	SKETCH › FINISH SKETCH
Sketch Constrainer	sketch.constrainer	SKETCH › CREATE
Toggle Driven Dimension	sketch.toggle_driven	–
Constraint Glyphs	sketch.glyphs	–
Snap Inference	sketch.snap	–
Insert DXF	sketch.insert_dxf	SKETCH › INSERT
Insert SVG	sketch.insert_svg	SKETCH › INSERT
Save As DXF	sketch.export_dxf	–
3D Line	sketch.line3d	–
3D Spline	sketch.spline3d	–
3D Point	sketch.point3d	–
Move 3D Point	sketch.move3d	–
Fillet	sketch.fillet	SKETCH › MODIFY
Equal Distance Chamfer	sketch.chamfer.equal_distance	SKETCH › MODIFY
Distance and Angle Chamfer	sketch.chamfer.distance_angle	SKETCH › MODIFY
Two Distance Chamfer	sketch.chamfer.two_distance	SKETCH › MODIFY
Offset (O)	sketch.offset	SKETCH › MODIFY
Break Offset Association	sketch.offset.break	–
Trim (T)	sketch.trim	SKETCH › MODIFY
Extend	sketch.extend	SKETCH › MODIFY
Break	sketch.break	SKETCH › MODIFY
Sketch Scale	sketch.scale	SKETCH › MODIFY
Move/Copy Sketch Entities	sketch.move	SKETCH › MODIFY
Mirror	sketch.mirror	SKETCH › PATTERN
Circular Pattern	sketch.pattern.circular	SKETCH › PATTERN
Rectangular Pattern	sketch.pattern.rectangular	SKETCH › PATTERN
Project (P)	sketch.project	SKETCH › CREATE
Intersect	sketch.intersect	SKETCH › CREATE
Include 3D Geometry	sketch.include_3d	SKETCH › CREATE
Project To Surface	sketch.project_to_surface	SKETCH › CREATE
Intersection Curve	sketch.intersection_curve	SKETCH › CREATE
Spun Profile	sketch.spun_profile	SKETCH › CREATE
Isoparametric Curve	sketch.isoparametric_curve	SKETCH › CREATE
Fit Curves to Mesh Section	sketch.fit_curves_to_section	SKETCH › CREATE
Break Link	sketch.break_link	–
Auto-Project Edges on Reference	sketch.auto_project	–
Redefine Sketch Plane	sketch.redefine	–
Copy Sketch Entities	sketch.copy	–
Cut Sketch Entities	sketch.cut	–
Paste Sketch Entities	sketch.paste	–
Inspect Sketch	sketch.inspect	–

Solid modelling (35)

Command	Id	Toolbar
Extrude (E)	solid.extrude	SOLID › CREATE
Revolve	solid.revolve	SOLID › CREATE
Sweep	solid.sweep	SOLID › CREATE
Loft	solid.loft	SOLID › CREATE
Box	solid.box	SOLID › CREATE
Cylinder	solid.cylinder	SOLID › CREATE
Sphere	solid.sphere	SOLID › CREATE
Torus	solid.torus	SOLID › CREATE
Fillet (F)	solid.fillet	SOLID › MODIFY
Chamfer	solid.chamfer	SOLID › MODIFY
Combine	solid.combine	SOLID › MODIFY
Rectangular Pattern	solid.pattern.rectangular	SOLID › CREATE
Circular Pattern	solid.pattern.circular	SOLID › CREATE
Pattern on Path	solid.pattern.path	SOLID › CREATE
Mirror	solid.mirror	SOLID › CREATE
Hole (H)	solid.hole	SOLID › CREATE
Pipe	solid.pipe	SOLID › CREATE
Bounding Solid	solid.bounding_solid	SOLID › CREATE
Scale	solid.scale	SOLID › MODIFY
Offset Face	solid.offset_face	SOLID › MODIFY
Thread	solid.thread	SOLID › CREATE
Shell	solid.shell	SOLID › MODIFY
Draft	solid.draft	SOLID › MODIFY
Split Face	solid.split_face	SOLID › MODIFY
Split Body	solid.split_body	SOLID › MODIFY
Press Pull (Q)	solid.press_pull	SOLID › MODIFY
Move/Copy (M)	solid.move	SOLID › MODIFY
Boundary Fill	solid.boundary_fill	SOLID › CREATE
Coil	solid.coil	SOLID › CREATE
Rib	solid.rib	SOLID › CREATE
Web	solid.web	SOLID › CREATE
Emboss	solid.emboss	SOLID › CREATE
Replace Face	solid.replace_face	SOLID › MODIFY
Align	solid.align	SOLID › MODIFY
Remove	solid.remove	SOLID › MODIFY

Surfaces (18, 1 planned)

Command	Id	Toolbar
Boundary Surface	surface.boundary	SURFACE › CREATE
Patch	surface.patch	SURFACE › CREATE
Stitch	surface.stitch	SURFACE › MODIFY
Thicken	surface.thicken	SURFACE › CREATE
Extend	surface.extend	SURFACE › MODIFY
Trim	surface.trim	SURFACE › MODIFY
Surface Extrude	surface.extrude	SURFACE › CREATE
Surface Revolve	surface.revolve	SURFACE › CREATE
Surface Sweep	surface.sweep	SURFACE › CREATE
Surface Loft	surface.loft	SURFACE › CREATE
Offset Surface	surface.offset	SURFACE › CREATE
Ruled Surface	surface.ruled	SURFACE › CREATE
Blend Surface	surface.blend	SURFACE › CREATE
Untrim	surface.untrim	SURFACE › MODIFY
Unstitch	surface.unstitch	SURFACE › MODIFY
Reverse Normal	surface.reverse_normal	SURFACE › MODIFY
Fair Surface	surface.fair	SURFACE › MODIFY
Surface Fillet (planned: #769)	surface.fillet	SURFACE › MODIFY
Match Surface	surface.match	SURFACE › MODIFY

Construction geometry (19)

Command	Id	Toolbar
Offset Plane	construct.plane.offset	SOLID › CONSTRUCT
Plane at Angle	construct.plane.at_angle	SOLID › CONSTRUCT
Axis Through Cylinder/Cone/Torus	construct.axis.through_cylinder	SOLID › CONSTRUCT
Axis Perpendicular To Face	construct.axis.normal_to_face	SOLID › CONSTRUCT
Axis Through Two Planes	construct.axis.two_planes	SOLID › CONSTRUCT
Axis Through Two Points	construct.axis.two_points	SOLID › CONSTRUCT
Axis Through Edge	construct.axis.edge	SOLID › CONSTRUCT
Point At Vertex	construct.point.vertex	SOLID › CONSTRUCT
Point Through Two Edges	construct.point.two_edges	SOLID › CONSTRUCT
Point Through Three Planes	construct.point.three_planes	SOLID › CONSTRUCT
Point At Center Of Circle/Sphere/Torus	construct.point.center	SOLID › CONSTRUCT
Point At Edge And Plane	construct.point.edge_plane	SOLID › CONSTRUCT
Point Along Path	construct.point.along_path	SOLID › CONSTRUCT
Midplane	construct.plane.midplane	SOLID › CONSTRUCT
Plane Through Two Edges	construct.plane.two_edges	SOLID › CONSTRUCT
Plane Through Three Points	construct.plane.three_points	SOLID › CONSTRUCT
Tangent Plane	construct.plane.tangent	SOLID › CONSTRUCT
Plane Along Path	construct.plane.along_path	SOLID › CONSTRUCT
Perpendicular Plane	construct.plane.perpendicular	SOLID › CONSTRUCT

Sheet metal (12)

Command	Id	Toolbar
Flange	sheet.flange	SHEET METAL › CREATE
Perforate	sheet.perforate	SHEET METAL › CREATE
Hem	sheet.hem	SHEET METAL › CREATE
Fold	sheet.fold	SHEET METAL › CREATE
Unfold	sheet.unfold	SHEET METAL › MODIFY
Refold	sheet.refold	SHEET METAL › MODIFY
Convert to Sheet Metal	sheet.convert	SHEET METAL › CREATE
Sheet Metal Rules	sheet.manage_rules	SHEET METAL › MODIFY
List Sheet Metal Rules	sheet.rules	–
Create Flat Pattern	sheet.flat_pattern	SHEET METAL › CREATE
Export Flat Pattern as DXF	sheet.export_dxf	–
Export Bend Table	sheet.export_bend_table	–

Plastic parts (7)

Command	Id	Toolbar
Boss	plastic.boss	PLASTIC › CREATE
Lip	plastic.lip	PLASTIC › CREATE
Snap Fit	plastic.snap_fit	PLASTIC › CREATE
Rest	plastic.rest	PLASTIC › CREATE
Manage Plastic Rules	plastic.manage_rules	PLASTIC › SETUP
Assign Plastic Rule	plastic.assign_rule	PLASTIC › SETUP
List Plastic Rules	plastic.rules	–

Components (17)

Command	Id	Toolbar
New Component	component.create	SOLID › ASSEMBLE
Create Components from Bodies	component.from_bodies	–
Activate Component	component.activate	–
List Components	component.list	–
Component Physical Properties	component.properties	–
Rename Component	component.rename	–
Delete Component	component.delete	–
Unlock Contents	component.unlock	–
Move Bodies to Component	component.move_bodies	–
Move Sketches to Component	component.move_sketches	–
Paste New	component.paste_new	–
Capture Position	component.capture_position	SOLID › POSITION
Revert Position	component.revert_position	SOLID › POSITION
Insert Design	component.insert_design	SOLID › ASSEMBLE
Update Links	component.update_links	–
Break Link	component.break_link	–
List Links	component.links	–

Assembly joints (15)

Command	Id	Toolbar
Joint Origin	joint.origin	SOLID › CREATE
Joint (J)	joint.create	SOLID › ASSEMBLE
As-Built Joint	joint.as_built	SOLID › ASSEMBLE
Rigid Group	joint.rigid_group	SOLID › ASSEMBLE
Drive Joints	joint.drive	SOLID › ASSEMBLE
Reach Point	joint.reach	–
Motion Link	joint.motion_link	SOLID › ASSEMBLE
Gear	joint.gear	SOLID › ASSEMBLE
Rack and Pinion	joint.rack_pinion	SOLID › ASSEMBLE
Screw	joint.screw	SOLID › ASSEMBLE
Joint Limits	joint.limits	–
Edit Joint	joint.edit	–
Delete Joint	joint.delete	–
List Joints	joint.list	–
Solve Joints	joint.solve	–

Configurations (8)

Command	Id	Toolbar
Configure	config.configure	SOLID › CONFIGURE
Display Configuration Table	config.table	SOLID › CONFIGURE
Configuration Column	config.column	–
Configuration Row	config.row	–
Activate Configuration	config.activate	–
Preview Configuration	config.preview	–
Configuration Rule	config.rule	–
Configuration Rules	config.rules	–

Timeline (21)

Command	Id	Toolbar
Compute All	timeline.compute_all	SOLID › MODIFY
Delete (Delete)	timeline.delete	SOLID › MODIFY
Rename	timeline.rename	–
New Feature Folder	timeline.group	–
Remove Feature Folders	timeline.ungroup	–
Rename Feature Folder	timeline.rename_group	–
Move Features to Folder	timeline.move_to_group	–
Move Timeline Items	timeline.move_many	–
Move Timeline Marker	timeline.rollback	–
Roll History Marker	timeline.roll_to	–
Reorder Feature	timeline.reorder	–
Reorder Features	timeline.reorder_many	–
Edit Feature	timeline.redefine	–
Feature Dependents	timeline.dependents	–
Suppress Feature	timeline.suppress	–
Edit Feature	timeline.edit	–
Inspect Feature	timeline.inspect	–
Copy Features	timeline.copy	–
Paste Features	timeline.paste	–
Add Recorded Feature	timeline.add	–
Export Command Script	timeline.export_script	–

Inspect (14)

Command	Id	Toolbar
Curvature Comb Analysis	inspect.curvature_comb	SKETCH › INSPECT
Minimum Radius Analysis	inspect.minimum_radius	SKETCH › INSPECT
Isocurve Analysis	inspect.isocurve	SKETCH › INSPECT
Center of Mass	inspect.center_of_mass	SKETCH › INSPECT
Zebra Analysis	inspect.zebra	SKETCH › INSPECT
Draft Analysis	inspect.draft	SKETCH › INSPECT
Environment Map Analysis	inspect.environment_map	SKETCH › INSPECT
Accessibility Analysis	inspect.accessibility	SKETCH › INSPECT
Curvature Map Analysis	inspect.curvature_map	SKETCH › INSPECT
Continuity Analysis	inspect.continuity	SURFACE › INSPECT
Interference	inspect.interference	SOLID › INSPECT
Measure (I)	inspect.measure	SOLID › INSPECT
Compare Bodies	inspect.compare	–
Section Analysis	inspect.section	SOLID › INSPECT

Files (9)

Command	Id	Toolbar
New Design (Ctrl+N)	file.new	–
Insert STEP	file.insert_step	SOLID › INSERT
Insert Mesh	file.insert_mesh	SOLID › INSERT
Save (Ctrl+S)	file.save	–
Save As	file.save_as	–
Export	file.export	–
Save As Mesh	file.save_mesh	MESH › MODIFY
Installed Slicers	file.slicers	–
Export Current View as DXF	file.export_view_dxf	–

Documents (4)

Command	Id	Toolbar
Open (Ctrl+O)	doc.open	–
Recoverable Designs	doc.recovery_list	–
Recover Design	doc.recover	–
Discard Recovered Design	doc.recovery_discard	–

Edit (4)

Command	Id	Toolbar
Undo (Ctrl+Z)	edit.undo	–
Redo (Ctrl+Y)	edit.redo	–
Checkpoint	edit.checkpoint	–
Restore Checkpoint	edit.restore_checkpoint	–

appearance.* (3)

Command	Id	Toolbar
Appearance (A)	appearance.assign	SOLID › MODIFY
Appearance Library	appearance.library	–
List Appearances	appearance.list	–

body.* (1)

Command	Id	Toolbar
Rename Body	body.rename	–

browser.* (6)

Command	Id	Toolbar
New Group	browser.group	–
Ungroup	browser.ungroup	–
Rename Group	browser.rename_group	–
Move Browser Items	browser.move	–
Order Browser Items	browser.order	–
Show/Hide	browser.visibility	–

cam.* (16)

Command	Id	Toolbar
Use Selected Holes	cam.holes.from_selection	–
Use Sketch Profile	cam.boundary.from_profile	–
Milling Setup	cam.setup.put	MILLING › SETUP
Tool Library	cam.tool.put	MILLING › SETUP
Milling Operation	cam.operation.put	MILLING › TOOLPATHS
NC Program	cam.program.put	MILLING › SETUP
Reorder Operations	cam.operation.order	–
Delete Manufacturing Item	cam.delete	–
Inspect Manufacturing	cam.inspect	–
Generate Toolpaths	cam.generate	MILLING › TOOLPATHS
CAM Job Status	cam.job.status	–
Cancel CAM Job	cam.job.cancel	–
Simulate Toolpaths	cam.simulate	MILLING › VERIFY
Post Reference G-code	cam.post	MILLING › EXPORT
Export CAM Artifact	cam.export	–
Collect CAM Export	cam.export.result	–

canvas.* (5)

Command	Id	Toolbar
Canvas	canvas.insert	SKETCH › INSERT
Decal	canvas.decal	SKETCH › INSERT
Edit Canvas	canvas.edit	SKETCH › INSERT
Calibrate Canvas	canvas.calibrate	–
Delete Canvas	canvas.delete	–

contact.* (7)

Command	Id	Toolbar
Enable Contact Sets	contact.enable_sets	SOLID › ASSEMBLE
Enable All Contact	contact.enable_all	SOLID › ASSEMBLE
Disable Contact	contact.disable_all	SOLID › ASSEMBLE
New Contact Set	contact.create	SOLID › ASSEMBLE
Edit Contact Set	contact.edit	–
List Contact Sets	contact.list	–
Check Contact	contact.check	–

diagnostics.* (4)

Command	Id	Toolbar
Crash Reports	diagnostics.crash_reports	–
Crash Report	diagnostics.crash_report	–
Delete Crash Reports	diagnostics.crash_reports.clear	–
Crash Test	diagnostics.crash_test	–

document.* (5)

Command	Id	Toolbar
Change Design Units	document.units	–
Design Properties	document.metadata	–
Change Design Properties	document.metadata.set	–
Remove Design Property	document.metadata.remove	–
Inspect Design	document.inspect	–

engine.* (1)

Command	Id	Toolbar
List Commands	engine.commands	–

explode.* (4)

Command	Id	Toolbar
Exploded View	explode.create	SOLID › ASSEMBLE
Show Exploded View	explode.show	–
List Exploded Views	explode.list	–
Delete Exploded View	explode.delete	–

expr.* (1)

Command	Id	Toolbar
Evaluate Expression	expr.evaluate	–

face.* (1)

Command	Id	Toolbar
Delete Face	face.delete	SOLID › MODIFY

library.* (3)

Command	Id	Toolbar
Inspect Local Library	library.inspect	–
Export Design Library	library.export	–
Apply Local Library Entry	library.apply	–

material.* (7)

Command	Id	Toolbar
Physical Material	material.assign	SOLID › MODIFY
List Materials	material.list	–
New Physical Material	material.create	–
Edit Physical Material	material.edit	–
Delete Physical Material	material.delete	–
Validate Physical Material Data	material.properties.validate	–
Directional Elastic Modulus	material.properties.directional	–

mesh.* (1)

Command	Id	Toolbar
Convert Mesh	mesh.convert	–

model.* (3)

Command	Id	Toolbar
List Edges	model.edges	–
List Faces	model.faces	–
List Threads	model.threads	–

motion.* (8)

Command	Id	Toolbar
Motion Study	motion.study	SOLID › ASSEMBLE
Play Motion Study	motion.play	–
Export Motion Study	motion.export	–
Export Motion Animation	motion.export_animation	–
Motion Trace	motion.trace	SOLID › ASSEMBLE
Keep Motion Trace	motion.trace.keep	–
List Motion Studies	motion.list	–
Delete Motion Study	motion.delete	–

occurrence.* (4)

Command	Id	Toolbar
Occurrence Physical Properties	occurrence.properties	–
Paste (Instance)	occurrence.copy	–
Move Occurrence	occurrence.move	–
Ground	occurrence.ground	–

parameters.* (13)

Command	Id	Toolbar
Change Parameters	parameters.change	SOLID › MODIFY
List Parameters	parameters.list	–
Add User Parameter	parameters.add	–
Rename Parameter	parameters.rename	–
Delete Parameter	parameters.delete	–
Favourite Parameter	parameters.favorite	–
Move Parameter	parameters.move	–
Comment Parameter	parameters.comment	–
Parameter Users	parameters.users	–
Parameter Graph	parameters.graph	–
Export Parameters	parameters.export	–
Import Parameters	parameters.import	–
Complete Expression	parameters.complete	–

parts.* (4)

Command	Id	Toolbar
Standard Parts	parts.library	–
Insert Fastener	parts.fastener	SOLID › INSERT
Insert Part	parts.insert	–
Change Part Size	parts.resize	–

render.* (10)

Command	Id	Toolbar
Check Render Request	render.preflight	–
Render Image	render.start	RENDER › IMAGE
Render Progress	render.status	–
Cancel Render	render.cancel	–
Export Render Image	render.export	–
Render Backends	render.backends	–
Render Settings	render.settings.get	–
Save Render Settings	render.settings.set	–
Inspect Render Scene	render.scene	RENDER › SCENE
Apply Render Camera	render.settings.apply	–

select.* (2)

Command	Id	Toolbar
Select	select.set	–
Clear Selection	select.clear	–

selection.* (1)

Command	Id	Toolbar
Delete	selection.delete	–

view.* (6)

Command	Id	Toolbar
New Named View	view.save	–
Rename Named View	view.rename	–
Delete Named View	view.delete	–
List Named Views	view.list	–
Restore Named View	view.apply	–
Navigate View	view.navigate	–