OneCAD

cmd

Extrude's start_offset says which way it goes: along the sketch normal, also with direction: negative (where a positive offset starts on the far side of the sketch from the extrusion)

2026-10-10 17:57:34 -04:00

tests

Lips on rounded, shelled rims: the band along the rim's edge is raised from the body's own faces (kernel::raise_band: the rim face split along the band's exact offset edge, the band's walls swept up from the walls below, a top), since a join can't merge walls that continue each other; grooves cut with a band reaching into the free side so no wall coincides; tests against the band's area times its height

2026-10-10 00:04:37 +00:00

boolean_regression_tests.rs

A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked

2026-10-10 17:57:34 -04:00

construct_tests.rs

Perpendicular Plane (construct.plane.perpendicular {plane, line}): the plane through a straight edge, sketch line or axis, square to a plane or planar face; a line square to the plane is refused (no single answer)

2026-10-10 05:00:55 +00:00

delete_face_tests.rs

Delete Face (face.delete, and faces in the Delete selection): a timeline feature that removes faces and heals the gap from the neighbouring planes through kernel::delete_faces; a picked face brings the rest of its surface (both halves of a hole's wall); face picks are stored by persistent name; a face its neighbours can't close is refused with the kernel's reason

2026-10-09 12:47:56 +00:00

extent_tests.rs

Extrude and Revolve To Object on curved faces follow the face: the tool runs through the target body and is cut back to its surface (the piece that starts at the profile); tests against a cylinder and a sphere (volumes by integration) and a revolve ending on a post; Shell Outside/Both on a cylinder through the exact curved offsets

2026-10-09 12:47:56 +00:00

frames_tests.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

frames.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

fuzz.rs

Robustness runs and the kernel fixes they found

2026-10-10 00:04:37 +00:00

legacy_ids.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

lib.rs

A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"

2026-10-10 17:57:34 -04:00

licences.rs

Releases offer plain programs; the licences are built in

2026-10-09 17:53:19 +00:00

params.rs

M0: engine command registry, file formats, view math and CPU renderer

2026-10-07 17:30:37 +00:00

pattern_suppress_tests.rs

A pattern or mirror of a suppressed feature has nothing to copy: its copies go with it and the pattern warns (the acceptance enclosure loses all four standoffs when Standoff is suppressed); scenario acceptance_pattern_of_suppressed_feature enabled

2026-10-10 05:27:01 +00:00

profile_refs_tests.rs

Profiles picked by index are kept by the curves around them: add_feature turns profile indices into the curve ids of each profile's outer loop (Extrude, Revolve, Sweep, Loft, Emboss, Sheet Base, Patch), so a face sketch whose projected outline is rebuilt still extrudes the picked region; a profile that is gone is an error on the feature, never another pick

2026-10-09 22:13:01 +00:00

recovery.rs

Autosave ids are unique within the process: an app restarted in the same second (the scenario harness crashes and restarts in one process) took the id {seconds}-{pid} of the crashed app, locked its entry again and so offered nothing to recover. The id now carries a per-process sequence number. Test: a restart in the same second still offers the crashed app's work

2026-10-10 13:24:08 -04:00

sample.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

split_face_tests.rs

Split pieces stay separate faces: Measure counts them apart and Offset Face moves only the picked piece

2026-10-09 23:31:52 +00:00

tests.rs

A failed MCP batch goes back to where it started however long the undo history is: rollback undid as many steps as the undo history had grown, but the history is capped at 200 steps, so once it was full a failed batch reported undone: 0 and left its sketches behind (an empty Sketch1, two sketches named TapHole). New commands edit.checkpoint and edit.restore_checkpoint (forget: true drops one) remember and restore the design, the active sketch and the undo history; batch takes a checkpoint before its first step, restores it on a failure and forgets it on success. Against an app without checkpoints batch falls back to counting undo steps

2026-10-10 17:21:25 -04:00

thread_tests.rs

Modelled threads (Thread with modeled: true): the ISO 68-1 profile cut along a helix, M3 to M20, on shafts and in bores; running out past a free end of the face, stopping square at a set length. The groove is a watertight screw-sweep mesh (kernel::sweep_helix_mesh) cut by kernel::faceted_boolean (BSP on the faceted body, tolerance ladder checked by A−B + A∩B = A); the polygon rebuild welds vertices across grid cells, splits pinched loops, finds T-junctions through a grid, and takes the group's plane for a loop a hair off flat

2026-10-09 12:47:56 +00:00

view.rs

browser.visibility hides and shows sketches, bodies, construction geometry and origin items (items: ids or names, or a whole folder; visible: bool), so agents can hide helper sketches over MCP. What is hidden moved from the egui UI state into the engine session (view state: not saved, not an undo step); the desktop eye toggles and menus use it, headless renders and fit leave hidden items out, and document.inspect, sketch.inspect and ui.inspect report visibility. ui.set still accepts hiddenBodies, hiddenOrigin, hiddenSketches and shownSketches. Tests: helper sketches hide and show in the engine (hostile input changes nothing) and through MCP only

2026-10-10 14:33:56 -04:00