bherbruckandClaude Opus 5.5
736d9277b8
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568). Co-Authored-By: Claude Opus 5.5 <[email protected]>
10091 lines
1.1 MiB
Plaintext
10091 lines
1.1 MiB
Plaintext
{
|
|
"about": "The action matrix's ratchet: design, entity, the actions tried on it (failing ones marked !). apps/solidcraft-cli/tests/action_matrix.rs, docs/action-matrix.md. Update with cargo xtask action-matrix --bless.",
|
|
"designs": {
|
|
"corpus/components-arm": {
|
|
"ArmBody (Arm:2)/F4:+x": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody (Arm:2)/F4:+x|F4:+y": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+x|F4:+z": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+x|F4:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+x|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+x|F5:blend:F4:+y|F4:+z": "!edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+y": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody (Arm:2)/F4:+y|F4:-x": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+y|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+y|F5:blend:F4:+y|F4:+z": "!edge.axis !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+z": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody (Arm:2)/F4:+z|F4:-x": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+z|F4:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:+z|F5:blend:F4:+y|F4:+z": "!edge.axis !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:-x": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody (Arm:2)/F4:-x|F4:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:-x|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:-x|F5:blend:F4:+y|F4:+z": "!edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:-y": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody (Arm:2)/F4:-y|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane !edge.project",
|
|
"ArmBody (Arm:2)/F4:-z": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody (Arm:2)/F5:blend:F4:+y|F4:+z": "!curved.axis !curved.tangent_plane",
|
|
"ArmBody (Arm:2)/body": "body.copy body.mirror body.move !body.pattern",
|
|
"ArmBody (Arm:2)/v[F4:+x & F4:+y & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+x & F4:+y & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+x & F4:+z & F4:-y]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+x & F4:+z & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+x & F4:-y & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+y & F4:-x & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+y & F4:-x & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+z & F4:-x & F4:-y]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:+z & F4:-x & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody (Arm:2)/v[F4:-x & F4:-y & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/F4:+x": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody/F4:+x|F4:+y": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+x|F4:+z": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+x|F4:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+x|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+x|F5:blend:F4:+y|F4:+z": "!edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+y": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody/F4:+y|F4:-x": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+y|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+y|F5:blend:F4:+y|F4:+z": "!edge.axis !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+z": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody/F4:+z|F4:-x": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+z|F4:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:+z|F5:blend:F4:+y|F4:+z": "!edge.axis !edge.normal_plane edge.project",
|
|
"ArmBody/F4:-x": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody/F4:-x|F4:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:-x|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:-x|F5:blend:F4:+y|F4:+z": "!edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:-y": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody/F4:-y|F4:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"ArmBody/F4:-z": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ArmBody/F5:blend:F4:+y|F4:+z": "!curved.axis !curved.tangent_plane",
|
|
"ArmBody/body": "body.copy body.mirror body.move body.pattern",
|
|
"ArmBody/v[F4:+x & F4:+y & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+x & F4:+y & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+x & F4:+z & F4:-y]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+x & F4:+z & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+x & F4:-y & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+y & F4:-x & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+y & F4:-x & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+z & F4:-x & F4:-y]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:+z & F4:-x & F5:blend:F4:+y|F4:+z]": "!vertex.plane_three_points vertex.point",
|
|
"ArmBody/v[F4:-x & F4:-y & F4:-z]": "!vertex.plane_three_points vertex.point",
|
|
"Base/F12:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Base/F12:side:c1#1|F1:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F12:side:c1#1|F1:-z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F12:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Base/F12:side:c1#2|F1:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F12:side:c1#2|F1:-z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F1:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/body": "body.copy body.mirror body.move body.pattern",
|
|
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:+z]": "vertex.point",
|
|
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:+z] (2)": "vertex.point",
|
|
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:-z]": "vertex.point",
|
|
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:-z] (2)": "vertex.point",
|
|
"Base/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/F10:blend:F9:+y|F9:+z": "!curved.axis !curved.tangent_plane",
|
|
"Body1/F10:blend:F9:+y|F9:+z|F9:+x": "!edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F10:blend:F9:+y|F9:+z|F9:+y": "!edge.axis !edge.normal_plane edge.project",
|
|
"Body1/F10:blend:F9:+y|F9:+z|F9:+z": "!edge.axis !edge.normal_plane edge.project",
|
|
"Body1/F10:blend:F9:+y|F9:+z|F9:-x": "!edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+x": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F9:+x|F9:+y": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+x|F9:+z": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+x|F9:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+x|F9:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+y": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F9:+y|F9:-x": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+y|F9:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+z": "!face.angle_plane !face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F9:+z|F9:-x": "!edge.axis !edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:+z|F9:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:-x": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F9:-x|F9:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:-x|F9:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:-y": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F9:-y|F9:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body1/F9:-z": "!face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+x & F9:+y]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+x & F9:+z]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+y & F9:-x]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+z & F9:-x]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:+x & F9:+y & F9:-z]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:+x & F9:+z & F9:-y]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:+x & F9:-y & F9:-z]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:+y & F9:-x & F9:-z]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:+z & F9:-x & F9:-y]": "!vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:-x & F9:-y & F9:-z]": "!vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/issue-489-stacked-join": {
|
|
"Body1/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.hole+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l4|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:top#[F2:side:l1,F4:side:l5]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top#[F2:side:l1,F4:side:l5]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top#[F2:side:l3,F4:side:l7]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top#[F2:side:l3,F4:side:l7]|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:side:l5": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l7": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:side:l7|F4:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top#[F2:side:l1,F4:side:l5]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top#[F2:side:l1,F4:side:l5]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top#[F2:side:l3,F4:side:l7]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:top#[F2:side:l1,F4:side:l5] & F4:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:top#[F2:side:l3,F4:side:l7] & F4:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F4:side:l5 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top#[F2:side:l3,F4:side:l7]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4 & F2:top#[F2:side:l1,F4:side:l5] & F4:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4 & F2:top#[F2:side:l3,F4:side:l7] & F4:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4 & F4:side:l5 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/joints-hinge": {
|
|
"Body1/F3:+x": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:+x|F3:+y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F3:+x|F3:+z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F3:+x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F3:+x|F3:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:+y": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:+y|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F3:+y|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:+y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:+z": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:+z|F3:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F3:-x": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F3:-x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:-x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:-y": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:-y|F3:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:-z": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F3:+x & F3:+z & F3:-y]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F3:+x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F3:+y & F3:+z & F3:-x]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F3:+y & F3:-x & F3:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:+z & F3:-x & F3:-y]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:-x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body2/F4:bottom": "!face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body2/F4:bottom|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F4:bottom|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F4:side#1": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body2/F4:side#1|F4:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body2/F4:side#2": "!curved.axis curved.tangent_plane",
|
|
"Body2/F4:side#2|F4:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body2/F4:top": "!face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body2/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Body2/v[F4:bottom & F4:side#1 & F4:side#2]": "vertex.point",
|
|
"Body2/v[F4:bottom & F4:side#1 & F4:side#2] (2)": "vertex.point vertex.point+edit",
|
|
"Body2/v[F4:side#1 & F4:side#2 & F4:top]": "vertex.point",
|
|
"Body2/v[F4:side#1 & F4:side#2 & F4:top] (2)": "vertex.point",
|
|
"Body3/F7:+x": "!face.angle_plane face.draft_neutral !face.extrude !face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body3/F7:+x|F7:+y": "!edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body3/F7:+x|F7:+z": "!edge.axis edge.chamfer edge.fillet edge.fillet+edit !edge.normal_plane edge.project",
|
|
"Body3/F7:+x|F7:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body3/F7:+x|F7:-z": "!edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit !edge.normal_plane edge.project",
|
|
"Body3/F7:+y": "!face.angle_plane face.draft_neutral !face.extrude !face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body3/F7:+y|F7:+z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body3/F7:+y|F7:-x": "!edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body3/F7:+y|F7:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project edge.project+edit",
|
|
"Body3/F7:+z": "!face.angle_plane face.draft_neutral !face.extrude !face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
|
|
"Body3/F7:+z|F7:-x": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body3/F7:+z|F7:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project edge.project+edit",
|
|
"Body3/F7:-x": "!face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body3/F7:-x|F7:-y": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body3/F7:-x|F7:-z": "!edge.axis edge.chamfer edge.fillet edge.fillet+edit !edge.normal_plane edge.project",
|
|
"Body3/F7:-y": "!face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body3/F7:-y|F7:-z": "!edge.axis edge.chamfer edge.fillet !edge.normal_plane edge.project",
|
|
"Body3/F7:-z": "!face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body3/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
|
|
"Body3/v[F7:+x & F7:+y & F7:+z]": "!vertex.plane_three_points vertex.point",
|
|
"Body3/v[F7:+x & F7:+y & F7:-z]": "!vertex.plane_three_points vertex.point",
|
|
"Body3/v[F7:+x & F7:+z & F7:-y]": "!vertex.plane_three_points vertex.point",
|
|
"Body3/v[F7:+x & F7:-y & F7:-z]": "!vertex.plane_three_points vertex.point",
|
|
"Body3/v[F7:+y & F7:+z & F7:-x]": "vertex.plane_three_points vertex.point",
|
|
"Body3/v[F7:+y & F7:-x & F7:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body3/v[F7:+z & F7:-x & F7:-y]": "!vertex.plane_three_points vertex.point",
|
|
"Body3/v[F7:-x & F7:-y & F7:-z]": "!vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body4/F8:bottom": "!face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body4/F8:bottom|F8:side#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body4/F8:bottom|F8:side#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body4/F8:side#1": "curved.axis curved.tangent_plane",
|
|
"Body4/F8:side#1|F8:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body4/F8:side#2": "curved.axis curved.tangent_plane",
|
|
"Body4/F8:side#2|F8:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body4/F8:top": "!face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body4/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body4/v[F8:bottom & F8:side#1 & F8:side#2]": "vertex.point",
|
|
"Body4/v[F8:bottom & F8:side#1 & F8:side#2] (2)": "vertex.point",
|
|
"Body4/v[F8:side#1 & F8:side#2 & F8:top]": "vertex.point",
|
|
"Body4/v[F8:side#1 & F8:side#2 & F8:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/m0-box-fillet-hole": {
|
|
"Body1/F2:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l5|F2:start": "edge.axis !edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5|F2:top": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5|F3:blend:F2:side:l5|F2:side:l8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l6|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l7|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l8|F2:start": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l8|F2:top": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l8|F3:blend:F2:side:l5|F2:side:l8": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:start|F3:blend:F2:side:l5|F2:side:l8": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:start|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.extrude+edit face.hole face.offset_plane face.press_pull !face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F2:top|F3:blend:F2:side:l5|F2:side:l8": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:c1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:c1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:blend:F2:side:l5|F2:side:l8": "curved.axis curved.tangent_plane",
|
|
"Body1/F5:side:c1#1": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F5:side:c1#2": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
|
|
"Body1/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l5 & F2:start & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l5 & F2:top & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l6 & F2:side:l7 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l6 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l7 & F2:side:l8 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l8 & F2:start & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l8 & F2:top & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:start & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:start & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:top & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/m0-revolve-primitives": {
|
|
"Body1/F2:end": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:end|F2:side:l1#[F2:end]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:end|F2:side:l2#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:end|F2:side:l3#[F2:end]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:end|F2:side:l4#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F2:end]|F2:side:l2#[F2:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F2:end]|F2:side:l4#[F2:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F2:start]|F2:side:l2#[F2:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F2:start]|F2:side:l4#[F2:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F2:start]|F2:start": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l1#[F2:end]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l1#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l2#[F2:end]": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l2#[F2:end]|F2:side:l3#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2#[F2:start]": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l2#[F2:start]|F2:side:l3#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3#[F2:end]|F2:side:l4#[F2:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3#[F2:start]|F2:side:l4#[F2:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3#[F2:start]|F2:start": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:side:l3#[F2:end]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:side:l3#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l4#[F2:end]": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l4#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:end & F2:side:l1#[F2:end] & F2:side:l2#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:end & F2:side:l1#[F2:end] & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:end & F2:side:l2#[F2:end] & F2:side:l3#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:end & F2:side:l3#[F2:end] & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l1#[F2:end] & F2:side:l2 & F2:side:l2#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l1#[F2:end] & F2:side:l4 & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l1#[F2:start] & F2:side:l2 & F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l1#[F2:start] & F2:side:l4 & F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F2:start] & F2:side:l2#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F2:start] & F2:side:l4#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l2#[F2:end] & F2:side:l3 & F2:side:l3#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l2#[F2:start] & F2:side:l3 & F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2#[F2:start] & F2:side:l3#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l3#[F2:end] & F2:side:l4 & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l3#[F2:start] & F2:side:l4 & F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3#[F2:start] & F2:side:l4#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body2/F3:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body2/F3:+x|F3:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+x|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body2/F3:+y|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+y|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+y|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+z": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body2/F3:+z|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+z|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:+z|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body2/F3:-x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-x|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body2/F3:-y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-y|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body2/F3:-z|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F3:-z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body2/F4:side#1": "curved.axis curved.tangent_plane",
|
|
"Body2/F4:side#2": "curved.axis curved.tangent_plane",
|
|
"Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body2/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body2/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+x & F3:+z & F3:-y]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+y & F3:+z & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+y & F3:-x & F3:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+y & F3:-x & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+z & F3:-y & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:+z & F4:side#1 & F4:side#2]": "vertex.point",
|
|
"Body2/v[F3:+z & F4:side#1 & F4:side#2] (2)": "vertex.point",
|
|
"Body2/v[F3:-x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:-x & F3:-y & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
|
|
"Body2/v[F3:-z & F4:side#1 & F4:side#2]": "vertex.point",
|
|
"Body2/v[F3:-z & F4:side#1 & F4:side#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/modern-path-pattern": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/modern-plastic": {
|
|
"Body1/F1:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+z": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+z|F3:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+z|F3:face:16": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+z|F3:face:17": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:+z|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F1:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:+x|F2:inner:F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:+x|F2:inner:F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:+x|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:+x|F3:face:19": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:+y|F2:inner:F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:+y|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:+y|F3:face:19": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:-x|F2:inner:F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-x|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-x|F3:face:19": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:-y|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-y|F3:face:19": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F4:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F4:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F5:face:23": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F5:face:24": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F5:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F5:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F6:face:32": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F6:face:33": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F6:face:37": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]|F6:face:38": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30]": "face.angle_plane !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30]|F5:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30]|F5:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30]|F5:face:29": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30]|F5:face:30": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F4:face:20,F4:face:21]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:inner:F1:-z#[F4:face:20,F4:face:21]|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:inner:F1:-z#[F4:face:20,F4:face:21]|F4:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:15|F3:face:16": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:15|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:15|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:16|F3:face:17": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:17|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:18": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:18|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:19": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F4:face:16": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:16|F4:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:17": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:17|F4:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:18|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18|F4:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:20": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:21": "curved.axis curved.tangent_plane",
|
|
"Body1/F5:face:23": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:23|F5:face:24": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:23|F5:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:23|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:24": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:24|F5:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:24|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:25": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:25|F5:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:25|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:26": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:26|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:27": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:27|F5:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:27|F5:face:30": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:27|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:28": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:28|F5:face:29": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:28|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:29": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:29|F5:face:30": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:29|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:30": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F5:face:30|F5:face:31": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:face:31": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F6:face:32": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:face:32|F6:face:33": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:32|F6:face:34": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:32|F6:face:35": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:32|F6:face:36": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:32|F6:face:37": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:33": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:face:33|F6:face:34": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:33|F6:face:38": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:34": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:face:34|F6:face:35": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:34|F6:face:38": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:35": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:face:35|F6:face:36": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:35|F6:face:38": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:36": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:face:36|F6:face:37": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:36|F6:face:38": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:37": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:face:37|F6:face:38": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:face:38": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+z & F3:face:15 & F3:face:16]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+z & F3:face:15 & F3:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+z & F3:face:16 & F3:face:17]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:+z & F3:face:17 & F3:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:+x & F2:inner:F1:+y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:+x & F2:inner:F1:+y & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:+x & F2:inner:F1:-y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:+x & F2:inner:F1:-y & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:+y & F2:inner:F1:-x & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:+y & F2:inner:F1:-x & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-x & F2:inner:F1:-y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-x & F2:inner:F1:-y & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F4:face:16 & F4:face:17]": "vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F4:face:16 & F4:face:17] (2)": "vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F5:face:23 & F5:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F5:face:23 & F5:face:26]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F5:face:24 & F5:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F5:face:25 & F5:face:26]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F6:face:32 & F6:face:33]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F6:face:32 & F6:face:37]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F6:face:33 & F6:face:38]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17,F5:face:23,F5:face:24,F5:face:25,F5:face:26] & F6:face:37 & F6:face:38]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30] & F5:face:27 & F5:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30] & F5:face:27 & F5:face:30]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30] & F5:face:28 & F5:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:face:16,F4:face:17]#[F5:face:27,F5:face:28,F5:face:29,F5:face:30] & F5:face:29 & F5:face:30]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F4:face:20,F4:face:21] & F4:face:20 & F4:face:21]": "vertex.point",
|
|
"Body1/v[F2:inner:F1:-z#[F4:face:20,F4:face:21] & F4:face:20 & F4:face:21] (2)": "vertex.point",
|
|
"Body1/v[F3:face:15 & F3:face:16 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:15 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:17 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:16 & F4:face:17 & F4:face:18]": "vertex.point",
|
|
"Body1/v[F4:face:16 & F4:face:17 & F4:face:18] (2)": "vertex.point",
|
|
"Body1/v[F4:face:18 & F4:face:20 & F4:face:21]": "vertex.point",
|
|
"Body1/v[F4:face:18 & F4:face:20 & F4:face:21] (2)": "vertex.point",
|
|
"Body1/v[F5:face:23 & F5:face:24 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:23 & F5:face:26 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:24 & F5:face:25 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:25 & F5:face:26 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:27 & F5:face:28 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:27 & F5:face:30 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:28 & F5:face:29 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:face:29 & F5:face:30 & F5:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:32 & F6:face:33 & F6:face:34]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:32 & F6:face:34 & F6:face:35]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:32 & F6:face:35 & F6:face:36]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:32 & F6:face:36 & F6:face:37]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:33 & F6:face:34 & F6:face:38]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:34 & F6:face:35 & F6:face:38]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:35 & F6:face:36 & F6:face:38]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:face:36 & F6:face:37 & F6:face:38]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/modern-sheet-metal": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:14": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:10|F2:face:11": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:10|F2:face:13": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:14|F2:face:16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:14|F2:face:17": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:14|F2:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:15": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:15|F2:face:16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:15|F2:face:17": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:15|F2:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:16": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:16|F2:face:2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:16|F2:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:17": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:17|F2:face:3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:17|F2:face:8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:18": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:18|F2:face:20": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:18|F2:face:21": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:18|F2:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:18|F2:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:19": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:19|F2:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:19|F2:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:19|F2:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:15": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:20": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:21": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:5|F2:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5|F2:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:6|F2:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:6|F2:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:14 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:15 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:15 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:11 & F2:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:11 & F2:face:19 & F2:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:12 & F2:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:13 & F2:face:19 & F2:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:11 & F2:face:12 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:11 & F2:face:18 & F2:face:20 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:12 & F2:face:13 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:13 & F2:face:18 & F2:face:21 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:14 & F2:face:16 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:14 & F2:face:17 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:15 & F2:face:16 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:15 & F2:face:17 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:18 & F2:face:20 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:18 & F2:face:21 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:19 & F2:face:20 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:19 & F2:face:21 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/move-bodies": {
|
|
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/body": "body.copy body.mirror body.move body.pattern",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Peg/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Peg/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Peg/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Peg/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Peg/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Peg/F4:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Peg/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Peg/body": "body.copy body.mirror body.move body.pattern",
|
|
"Peg/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Peg/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/naming-split-pieces": {
|
|
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top#[F2:side:l2,F4:side:l2]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top#[F2:side:l2,F4:side:l2]|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top#[F2:side:l4,F4:side:l4]|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:top#[F2:side:l2,F4:side:l2] & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:top#[F2:side:l4,F4:side:l4] & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top#[F2:side:l2,F4:side:l2] & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top#[F2:side:l4,F4:side:l4] & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"corpus/split-body-pieces": {
|
|
"Body1 (1)/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1 (1)/F2:side:l1|F2:side:l2#[F2:side:l1,F4:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l1|F2:side:l4#[F2:side:l1,F4:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l1|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l1|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:start#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1 (1)/F2:start#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1 (1)/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1 (1)/F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "curved.axis curved.tangent_plane",
|
|
"Body1 (1)/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1 (1)/v[F2:side:l1 & F2:side:l2#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l1 & F2:side:l2#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l1 & F2:side:l4#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l1 & F2:side:l4#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:start#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l3": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"demo/enclosure_steps": {
|
|
"Enclosure/F10:face:20": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F10:face:20|F10:face:44": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F10:face:20|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F10:face:21": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F10:face:21|F10:face:44": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F10:face:21|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F10:face:22": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Enclosure/F10:face:22|F10:face:44": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F10:face:22|F4:inner:F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F10:face:23": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F10:face:23|F10:face:44": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F10:face:23|F4:inner:F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F10:face:44": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Enclosure/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
|
|
"Enclosure/F2:side:l2|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F2:top~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F2:top~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F2:top~3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F6:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F6:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F6:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l2|F6:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F6:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F6:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Enclosure/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:start": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l2~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l2~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l2~3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Enclosure/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Enclosure/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Enclosure/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l2~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l2~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l2~3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F6:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F7:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F7:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F8:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F8:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F9:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]|F9:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F7:face:20,F7:face:21]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F7:face:20,F7:face:21]|F7:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F4:inner:F2:start#[F7:face:20,F7:face:21]|F7:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F8:face:14,F8:face:15]": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F8:face:14,F8:face:15]|F8:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F8:face:14,F8:face:15]|F8:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F9:face:24,F9:face:25]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F9:face:24,F9:face:25]|F9:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F9:face:24,F9:face:25]|F9:face:25": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F6:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F7:face:18": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:face:18|F7:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F7:face:19": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:face:19|F7:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:face:20": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:face:20|F7:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:face:21": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:face:21|F7:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:face:24": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F8:face:12": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Enclosure/F8:face:12|F8:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F8:face:13": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F8:face:13|F8:face:32": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Enclosure/F8:face:14": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Enclosure/F8:face:14|F8:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F8:face:15": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F8:face:15|F8:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F8:face:32": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F9:face:22": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Enclosure/F9:face:22|F9:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F9:face:23": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F9:face:23|F9:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F9:face:24": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Enclosure/F9:face:24|F9:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Enclosure/F9:face:25": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Enclosure/F9:face:25|F9:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F9:face:33": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/body": "body.copy body.mirror body.move body.pattern",
|
|
"Enclosure/v[F10:face:20 & F10:face:21 & F10:face:44]": "vertex.point",
|
|
"Enclosure/v[F10:face:20 & F10:face:21 & F10:face:44] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F10:face:20 & F10:face:21 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]]": "vertex.point",
|
|
"Enclosure/v[F10:face:20 & F10:face:21 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]] (2)": "vertex.point",
|
|
"Enclosure/v[F10:face:22 & F10:face:23 & F10:face:44]": "vertex.point",
|
|
"Enclosure/v[F10:face:22 & F10:face:23 & F10:face:44] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F10:face:22 & F10:face:23 & F4:inner:F2:start]": "vertex.point",
|
|
"Enclosure/v[F10:face:22 & F10:face:23 & F4:inner:F2:start] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:start]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:start] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:top]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:top] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l2]": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F6:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19]] (2)": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2]": "vertex.point vertex.point+edit",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l4]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:face:18,F7:face:19] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"demo/pi-case": {
|
|
"Body1/F11:side:l5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F11:side:l5|F11:side:l6": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l5|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F11:side:l5|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F11:side:l6|F11:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l6|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l6|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l6|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l6|F4:inner:F2:side:l2~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l7": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F11:side:l7|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l7|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F11:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F11:side:l8|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F11:side:l8|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F11:side:l8|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F11:side:l8|F4:inner:F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l5|F13:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:l5|F13:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l5|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:l6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l6|F13:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:l6|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l7|F13:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l7|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F13:side:l7|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:l8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l8|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F13:side:l8|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~7": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F3:blend:F2:side:l1|F2:side:l2~8": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F9:side:l18~1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18]|F9:side:l18~2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:start~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:start~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F9:side:l11#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F9:side:l12~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F9:side:l12~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F9:side:l20~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]|F9:side:l20~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F9:side:l14~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F9:side:l14~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F9:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6]|F9:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]~3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]~4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1|F9:side:l11#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2|F9:side:l11#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1|F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1|F9:side:l13#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2|F9:side:l13#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3|F9:side:l13#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~7": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F3:blend:F2:side:l1|F2:side:l4~8": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F9:side:l8~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]|F9:side:l8~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~7": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~8": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~7": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~8": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l1~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F2:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
|
|
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F2:start#[F6:side:c2]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F6:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:top": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:[email protected]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:[email protected]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:[email protected]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l11#[F9:side:l12,F9:side:l14]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l11#[F9:side:l18,F9:side:l20]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l11#[F9:side:l6,F9:side:l8]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l13#[F9:side:l12,F9:side:l14]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l13#[F9:side:l18,F9:side:l20]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l13#[F9:side:l6,F9:side:l8]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l18": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l20": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F9:side:l6": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l8": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.copy+edit body.mirror body.mirror+edit body.move body.pattern",
|
|
"Body1/v[F11:side:l5 & F11:side:l6 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l5 & F11:side:l6 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l5 & F11:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l5 & F11:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l6 & F11:side:l7 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l6 & F11:side:l7 & F4:inner:F2:side:l2]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F11:side:l6 & F2:side:l2]": "vertex.point",
|
|
"Body1/v[F11:side:l6 & F4:inner:F2:side:l2]": "vertex.point",
|
|
"Body1/v[F11:side:l7 & F11:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l7 & F11:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F11:side:l8 & F2:side:l2]": "vertex.point",
|
|
"Body1/v[F11:side:l8 & F4:inner:F2:side:l2]": "vertex.point",
|
|
"Body1/v[F13:side:l5 & F13:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:l5 & F13:side:l6 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:l5 & F13:side:l8 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:l5 & F13:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:l6 & F13:side:l7 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:l6 & F13:side:l7 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:l7 & F13:side:l8 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:l7 & F13:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F9:side:l11#[F9:side:l18,F9:side:l20] & F9:side:l18]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20]] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3 & F9:side:l13#[F9:side:l18,F9:side:l20] & F9:side:l18]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2] (6)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F3:blend:F2:side:l1|F2:side:l2] (7)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F3:blend:F2:side:l1|F2:side:l2,F9:side:l18] & F9:side:l18]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2 & F9:side:l11#[F9:side:l12,F9:side:l14] & F9:side:l12]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2 & F9:side:l12 & F9:side:l13#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3 & F9:side:l13#[F9:side:l18,F9:side:l20] & F9:side:l20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#3]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F2:start]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F9:side:l11#[F9:side:l18,F9:side:l20] & F9:side:l20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F9:side:l12]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l11,F9:side:l12,F9:side:l20] & F9:side:l20]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F9:side:l11#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2 & F9:side:l11#[F9:side:l12,F9:side:l14] & F9:side:l14]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#2] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1 & F9:side:l13#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2 & F9:side:l13#[F9:side:l12,F9:side:l14] & F9:side:l14]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#2]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F9:side:l14]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F2:top,F9:side:l14,F9:side:l6] & F9:side:l6]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F9:side:l11#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:start,F9:side:l11]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F9:side:l13#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l2,F9:side:l11,F9:side:l12,F9:side:l13,F9:side:l14,F9:side:l18,F9:side:l20,F9:side:l6]#[F2:top,F9:side:l13]#1 & F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8]]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4] (6)": "vertex.point",
|
|
"Body1/v[F2:side:l1#[F3:blend:F2:side:l1|F2:side:l4,F9:side:l8] & F3:blend:F2:side:l1|F2:side:l4] (7)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"examples/bracket": {
|
|
"Bracket/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:bottom|F2:side:a": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:bottom|F2:side:b": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:bottom|F2:side:c": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:bottom|F2:side:d": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:bottom|F2:side:e": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:bottom|F2:side:f": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Bracket/F2:bottom|F3:blend:F2:side:a|F2:side:b": "!edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Bracket/F2:side:a": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Bracket/F2:side:a|F2:side:f": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Bracket/F2:side:a|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:a|F3:blend:F2:side:a|F2:side:b": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:b": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Bracket/F2:side:b|F2:side:c": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Bracket/F2:side:b|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Bracket/F2:side:b|F3:blend:F2:side:a|F2:side:b": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:c": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:side:c|F2:side:d": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Bracket/F2:side:c|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Bracket/F2:side:d": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:side:d|F2:side:e": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Bracket/F2:side:d|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Bracket/F2:side:e": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:side:e|F2:side:f": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Bracket/F2:side:e|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:f": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Bracket/F2:side:f|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:start|F3:blend:F2:side:a|F2:side:b": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F3:blend:F2:side:a|F2:side:b": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Bracket/body": "body.copy body.mirror body.move body.pattern",
|
|
"Bracket/v[F2:bottom & F2:side:a & F2:side:f]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:bottom & F2:side:a & F3:blend:F2:side:a|F2:side:b]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:bottom & F2:side:b & F2:side:c]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:bottom & F2:side:b & F3:blend:F2:side:a|F2:side:b]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:bottom & F2:side:c & F2:side:d]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:bottom & F2:side:d & F2:side:e]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:bottom & F2:side:e & F2:side:f]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:a & F2:side:f & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Bracket/v[F2:side:a & F2:start & F3:blend:F2:side:a|F2:side:b]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Bracket/v[F2:side:b & F2:side:c & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:b & F2:start & F3:blend:F2:side:a|F2:side:b]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:c & F2:side:d & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:d & F2:side:e & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Bracket/v[F2:side:e & F2:side:f & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"examples/sensor_enclosure": {
|
|
"Case/F11:side:bs#1": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F11:side:bs#2": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F11:side:bs#3": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F11:side:bs#4": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F11:side:bs#[F11:top]#1": "curved.axis curved.tangent_plane",
|
|
"Case/F11:side:bs#[F11:top]#1|F11:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F11:side:bs#[F11:top]#2": "curved.axis curved.tangent_plane",
|
|
"Case/F11:side:bs#[F11:top]#2|F11:top": "edge.chamfer !edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F11:side:bs#[F4:inner:F2:start]#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F11:side:bs#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F11:side:bs#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F11:side:bs#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F11:side:bs_hole#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F11:side:bs_hole#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F11:side:bs_hole#3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F11:side:bs_hole#4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F11:side:bs_hole#[F11:top]#1": "curved.axis curved.tangent_plane",
|
|
"Case/F11:side:bs_hole#[F11:top]#1|F11:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F11:side:bs_hole#[F11:top]#2": "curved.axis curved.tangent_plane",
|
|
"Case/F11:side:bs_hole#[F11:top]#2|F11:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1": "curved.axis curved.tangent_plane",
|
|
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane",
|
|
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F11:top": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F12:face:102": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:102|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:103": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:103|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:104": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:104|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:105": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:105|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F12:face:106": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:106|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:107": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:107|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:108": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:108|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:109": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:109|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:110": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:110|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:111": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:111|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F12:face:112": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:112|F12:face:149": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F12:face:113": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:113|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F12:face:147": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F12:face:148": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F12:face:149": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Case/F12:face:28": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:28|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:29": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:29|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:30": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:30|F4:inner:F2:start#[F12:face:30,F12:face:31]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:31": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:31|F4:inner:F2:start#[F12:face:30,F12:face:31]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F12:face:32": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:32|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:33": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:33|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:34": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:34|F4:inner:F2:start#[F12:face:34,F12:face:35]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:35": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:35|F4:inner:F2:start#[F12:face:34,F12:face:35]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F12:face:36": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:36|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:37": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:37|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:38": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:38|F4:inner:F2:start#[F12:face:38,F12:face:39]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F12:face:39": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:39|F4:inner:F2:start#[F12:face:38,F12:face:39]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F12:face:52": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:53": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:54": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:55": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:56": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:57": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:58": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:59": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:60": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:61": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:62": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:63": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:76": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:77": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:78": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:79": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:80": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:81": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:82": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:83": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:84": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F12:face:85": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F12:face:86": "curved.axis curved.tangent_plane",
|
|
"Case/F12:face:87": "curved.axis curved.tangent_plane",
|
|
"Case/F16:face:151": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F16:face:151|F16:face:152": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:151|F16:face:153": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F16:face:151|F16:face:154": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:151|F16:face:155": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F16:face:151|F16:face:156": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:151|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F16:face:152": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F16:face:152|F16:face:153": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:152|F16:face:157": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F16:face:152|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:153": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F16:face:153|F16:face:154": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:153|F16:face:157": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F16:face:154": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F16:face:154|F16:face:155": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F16:face:154|F16:face:157": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:155": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F16:face:155|F16:face:156": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F16:face:155|F16:face:157": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F16:face:156": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Case/F16:face:156|F16:face:157": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:156|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F16:face:157": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F16:face:157|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l1|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:side:l1|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#3": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#4": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#4": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Case/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#4": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Case/F2:side:l4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#3": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#4": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#3": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Case/F2:start|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F2:start|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:start|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:start|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:top": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Case/F2:top|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:top|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:top|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:top|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l2#4": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l4#4": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l2|F2:side:l3#1": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l2|F2:side:l3#2": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l2|F2:side:l3#3": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l2|F2:side:l3#4": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l3|F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l3|F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l3|F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l3|F2:side:l4#4": "curved.axis curved.tangent_plane",
|
|
"Case/F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Case/F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "curved.axis curved.tangent_plane",
|
|
"Case/F4:inner:F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l1|F9:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l1|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l1|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:so#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:so#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F11:side:bs_hole]": "face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Case/F4:inner:F2:start#[F12:face:30,F12:face:31]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F12:face:34,F12:face:35]": "face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F12:face:38,F12:face:39]": "face.extrude !face.hole face.midplane !face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell !face.shell+edit face.sketch",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude face.extrude+edit !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:so_hole]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Case/F4:inner:F2:start#[F6:side:so_hole]|F6:side:so_hole#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F2:start#[F6:side:so_hole]|F6:side:so_hole#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Case/F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Case/F6:side:so#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:so#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F6:side:so_hole#1|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F6:side:so_hole#2|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F9:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F9:side:l1|F9:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Case/F9:side:l2|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/F9:side:l3|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Case/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
|
|
"Case/v[F11:side:bs#[F11:top]#1 & F11:side:bs#[F11:top]#2 & F11:top]": "vertex.point vertex.point+edit",
|
|
"Case/v[F11:side:bs#[F11:top]#1 & F11:side:bs#[F11:top]#2 & F11:top] (2)": "vertex.point",
|
|
"Case/v[F11:side:bs#[F4:inner:F2:start]#1 & F11:side:bs#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
|
|
"Case/v[F11:side:bs#[F4:inner:F2:start]#1 & F11:side:bs#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
|
|
"Case/v[F11:side:bs_hole#[F11:top]#1 & F11:side:bs_hole#[F11:top]#2 & F11:top]": "vertex.point vertex.point+edit",
|
|
"Case/v[F11:side:bs_hole#[F11:top]#1 & F11:side:bs_hole#[F11:top]#2 & F11:top] (2)": "vertex.point",
|
|
"Case/v[F11:side:bs_hole#[F4:inner:F2:start]#1 & F11:side:bs_hole#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs_hole]]": "vertex.point",
|
|
"Case/v[F11:side:bs_hole#[F4:inner:F2:start]#1 & F11:side:bs_hole#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs_hole]] (2)": "vertex.point vertex.point+edit",
|
|
"Case/v[F12:face:102 & F12:face:103 & F12:face:147]": "vertex.point",
|
|
"Case/v[F12:face:102 & F12:face:103 & F12:face:147] (2)": "vertex.point",
|
|
"Case/v[F12:face:104 & F12:face:105 & F12:face:147]": "vertex.point",
|
|
"Case/v[F12:face:104 & F12:face:105 & F12:face:147] (2)": "vertex.point",
|
|
"Case/v[F12:face:106 & F12:face:107 & F12:face:148]": "vertex.point",
|
|
"Case/v[F12:face:106 & F12:face:107 & F12:face:148] (2)": "vertex.point",
|
|
"Case/v[F12:face:108 & F12:face:109 & F12:face:148]": "vertex.point",
|
|
"Case/v[F12:face:108 & F12:face:109 & F12:face:148] (2)": "vertex.point vertex.point+edit",
|
|
"Case/v[F12:face:110 & F12:face:111 & F12:face:149]": "vertex.point",
|
|
"Case/v[F12:face:110 & F12:face:111 & F12:face:149] (2)": "vertex.point",
|
|
"Case/v[F12:face:112 & F12:face:113 & F12:face:149]": "vertex.point",
|
|
"Case/v[F12:face:112 & F12:face:113 & F12:face:149] (2)": "vertex.point",
|
|
"Case/v[F12:face:28 & F12:face:29 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
|
|
"Case/v[F12:face:28 & F12:face:29 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
|
|
"Case/v[F12:face:30 & F12:face:31 & F4:inner:F2:start#[F12:face:30,F12:face:31]]": "vertex.point",
|
|
"Case/v[F12:face:30 & F12:face:31 & F4:inner:F2:start#[F12:face:30,F12:face:31]] (2)": "vertex.point",
|
|
"Case/v[F12:face:32 & F12:face:33 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
|
|
"Case/v[F12:face:32 & F12:face:33 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
|
|
"Case/v[F12:face:34 & F12:face:35 & F4:inner:F2:start#[F12:face:34,F12:face:35]]": "vertex.point",
|
|
"Case/v[F12:face:34 & F12:face:35 & F4:inner:F2:start#[F12:face:34,F12:face:35]] (2)": "vertex.point",
|
|
"Case/v[F12:face:36 & F12:face:37 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
|
|
"Case/v[F12:face:36 & F12:face:37 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
|
|
"Case/v[F12:face:38 & F12:face:39 & F4:inner:F2:start#[F12:face:38,F12:face:39]]": "vertex.point",
|
|
"Case/v[F12:face:38 & F12:face:39 & F4:inner:F2:start#[F12:face:38,F12:face:39]] (2)": "vertex.point",
|
|
"Case/v[F16:face:151 & F16:face:152 & F16:face:153]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F16:face:151 & F16:face:152 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:151 & F16:face:153 & F16:face:154]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F16:face:151 & F16:face:154 & F16:face:155]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:151 & F16:face:155 & F16:face:156]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:151 & F16:face:156 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:152 & F16:face:153 & F16:face:157]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:152 & F16:face:157 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:153 & F16:face:154 & F16:face:157]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:154 & F16:face:155 & F16:face:157]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:155 & F16:face:156 & F16:face:157]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F16:face:156 & F16:face:157 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#4]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#4 & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#2 & F3:blend:F2:side:l1|F2:side:l4#3]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#3 & F3:blend:F2:side:l1|F2:side:l4#4]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#4 & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l1 & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l1 & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l1 & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l1 & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#4]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#4 & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#2]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#2 & F3:blend:F2:side:l2|F2:side:l3#3]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#3 & F3:blend:F2:side:l2|F2:side:l3#4]": "vertex.point",
|
|
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#4 & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#2]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#2 & F3:blend:F2:side:l2|F2:side:l3#3]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#3 & F3:blend:F2:side:l2|F2:side:l3#4]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#4 & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#2]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#2 & F3:blend:F2:side:l3|F2:side:l4#3]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#3 & F3:blend:F2:side:l3|F2:side:l4#4]": "vertex.point",
|
|
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#4 & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.point vertex.point+edit",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#2 & F3:blend:F2:side:l1|F2:side:l4#3]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#3 & F3:blend:F2:side:l1|F2:side:l4#4]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#4 & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#2]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#2 & F3:blend:F2:side:l3|F2:side:l4#3]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#3 & F3:blend:F2:side:l3|F2:side:l4#4]": "vertex.point",
|
|
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#4 & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]] & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]] & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]]": "vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]]": "vertex.point",
|
|
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#2 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
|
|
"Lid/F14:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Lid/F14:side:l1|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:side:l1|F15:blend:F14:side:l1|F14:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F14:side:l1|F15:blend:F14:side:l1|F14:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F14:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Lid/F14:side:l2|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:side:l2|F15:blend:F14:side:l1|F14:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:side:l2|F15:blend:F14:side:l2|F14:side:l3": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F14:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Lid/F14:side:l3|F14:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F14:side:l3|F15:blend:F14:side:l2|F14:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F14:side:l3|F15:blend:F14:side:l3|F14:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F14:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Lid/F14:side:l4|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:side:l4|F15:blend:F14:side:l1|F14:side:l4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Lid/F14:side:l4|F15:blend:F14:side:l3|F14:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F14:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Lid/F14:start|F18:side:a17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F18:side:a18": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F18:side:a19": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:start|F18:side:a20": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:start|F18:side:l17": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F18:side:l18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:start|F18:side:l19": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Lid/F14:start|F18:side:l20": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F14:start|F20:side:ls#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F20:side:ls#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:start|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:start|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:top": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Lid/F14:top|F15:blend:F14:side:l1|F14:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F15:blend:F14:side:l1|F14:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F15:blend:F14:side:l2|F14:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F14:top|F15:blend:F14:side:l3|F14:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:ls#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:ls#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:[email protected]#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:[email protected]#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F14:top|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F14:top|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F15:blend:F14:side:l1|F14:side:l2": "curved.axis curved.tangent_plane",
|
|
"Lid/F15:blend:F14:side:l1|F14:side:l2|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Lid/F15:blend:F14:side:l1|F14:side:l4": "curved.axis curved.tangent_plane",
|
|
"Lid/F15:blend:F14:side:l1|F14:side:l4|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Lid/F15:blend:F14:side:l2|F14:side:l3": "!curved.axis curved.tangent_plane",
|
|
"Lid/F15:blend:F14:side:l2|F14:side:l3|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Lid/F15:blend:F14:side:l3|F14:side:l4": "curved.axis curved.tangent_plane",
|
|
"Lid/F15:blend:F14:side:l3|F14:side:l4|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Lid/F18:side:a13": "curved.axis curved.tangent_plane",
|
|
"Lid/F18:side:a13|F18:side:l13": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a13|F18:side:l14": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Lid/F18:side:a13|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a13|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F18:side:a14": "curved.axis curved.tangent_plane",
|
|
"Lid/F18:side:a14|F18:side:l14": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a14|F18:side:l15": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a14|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F18:side:a14|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:a15": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Lid/F18:side:a15|F18:side:l15": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a15|F18:side:l16": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a15|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a15|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:a16": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Lid/F18:side:a16|F18:side:l13": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F18:side:a16|F18:side:l16": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a16|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:a16|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:a17": "curved.axis curved.tangent_plane",
|
|
"Lid/F18:side:a17|F18:side:l17": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a17|F18:side:l18": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F18:side:a17|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a18": "curved.axis curved.tangent_plane",
|
|
"Lid/F18:side:a18|F18:side:l18": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a18|F18:side:l19": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Lid/F18:side:a18|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Lid/F18:side:a19": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Lid/F18:side:a19|F18:side:l19": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a19|F18:side:l20": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a19|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a20": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Lid/F18:side:a20|F18:side:l17": "edge.axis edge.normal_plane edge.project",
|
|
"Lid/F18:side:a20|F18:side:l20": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:a20|F18:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Lid/F18:side:l13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l13|F18:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l13|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:l14": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l14|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l14|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l15|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l15|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l16": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l16|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:l16|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l17": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l17|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l18": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.hole+edit face.offset_plane !face.press_pull !face.shell face.sketch face.sketch+edit",
|
|
"Lid/F18:side:l18|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Lid/F18:side:l19": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l19|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:side:l20": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Lid/F18:side:l20|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Lid/F18:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
|
|
"Lid/F20:side:ls#1": "!curved.axis curved.tangent_plane",
|
|
"Lid/F20:side:ls#2": "!curved.axis curved.tangent_plane",
|
|
"Lid/F20:side:[email protected]#1": "!curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Lid/F20:side:[email protected]#2": "!curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Lid/F20:side:[email protected]#1": "!curved.axis curved.tangent_plane",
|
|
"Lid/F20:side:[email protected]#2": "!curved.axis curved.tangent_plane",
|
|
"Lid/F20:side:[email protected]#1": "!curved.axis curved.tangent_plane",
|
|
"Lid/F20:side:[email protected]#2": "!curved.axis curved.tangent_plane",
|
|
"Lid/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Lid/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Lid/v[F14:side:l1 & F14:top & F15:blend:F14:side:l1|F14:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l1 & F14:top & F15:blend:F14:side:l1|F14:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l1 & F15:blend:F14:side:l1|F14:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F14:side:l1 & F15:blend:F14:side:l1|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l2 & F14:top & F15:blend:F14:side:l1|F14:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l2 & F14:top & F15:blend:F14:side:l2|F14:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F14:side:l2 & F15:blend:F14:side:l1|F14:side:l2 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Lid/v[F14:side:l2 & F15:blend:F14:side:l2|F14:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l3 & F14:top & F15:blend:F14:side:l2|F14:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l3 & F14:top & F15:blend:F14:side:l3|F14:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l3 & F15:blend:F14:side:l2|F14:side:l3 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F14:side:l3 & F15:blend:F14:side:l3|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F14:side:l4 & F14:top & F15:blend:F14:side:l1|F14:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l4 & F14:top & F15:blend:F14:side:l3|F14:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l4 & F15:blend:F14:side:l1|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:side:l4 & F15:blend:F14:side:l3|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Lid/v[F14:start & F18:side:a17 & F18:side:l17]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F14:start & F18:side:a17 & F18:side:l18]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:start & F18:side:a18 & F18:side:l18]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:start & F18:side:a18 & F18:side:l19]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:start & F18:side:a19 & F18:side:l19]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:start & F18:side:a19 & F18:side:l20]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:start & F18:side:a20 & F18:side:l17]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F14:start & F18:side:a20 & F18:side:l20]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F14:start & F20:side:ls#1 & F20:side:ls#2]": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:ls#1 & F20:side:ls#2] (2)": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
|
|
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point vertex.point+edit",
|
|
"Lid/v[F14:top & F20:side:ls#1 & F20:side:ls#2]": "vertex.point",
|
|
"Lid/v[F14:top & F20:side:ls#1 & F20:side:ls#2] (2)": "vertex.point",
|
|
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
|
|
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
|
|
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point vertex.point+edit",
|
|
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
|
|
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
|
|
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
|
|
"Lid/v[F18:side:a13 & F18:side:l13 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a13 & F18:side:l13 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a13 & F18:side:l14 & F18:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F18:side:a13 & F18:side:l14 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a14 & F18:side:l14 & F18:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Lid/v[F18:side:a14 & F18:side:l14 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F18:side:a14 & F18:side:l15 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a14 & F18:side:l15 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Lid/v[F18:side:a15 & F18:side:l15 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a15 & F18:side:l15 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a15 & F18:side:l16 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a15 & F18:side:l16 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a16 & F18:side:l13 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a16 & F18:side:l13 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Lid/v[F18:side:a16 & F18:side:l16 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a16 & F18:side:l16 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Lid/v[F18:side:a17 & F18:side:l17 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a17 & F18:side:l18 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a18 & F18:side:l18 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a18 & F18:side:l19 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a19 & F18:side:l19 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a19 & F18:side:l20 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"Lid/v[F18:side:a20 & F18:side:l17 & F18:top]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
|
|
"Lid/v[F18:side:a20 & F18:side:l20 & F18:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/01-box": {
|
|
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/02-cylinder": {
|
|
"Cylinder/F2:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Cylinder/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cylinder/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cylinder/F2:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Cylinder/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cylinder/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cylinder/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Cylinder/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Cylinder/body": "body.copy body.mirror body.move body.pattern",
|
|
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
|
|
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
|
|
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
|
|
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/03-box-through-hole": {
|
|
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Box/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Box/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Box/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Box/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/04-revolve-vase": {
|
|
"Vase/F2:side:a1#1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:a1#1|F2:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:a1#2|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:a1#2|F2:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:a1#3|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:a1#3|F2:side:l3#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l1": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Vase/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Vase/F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Vase/F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Vase/F2:side:l3#1": "curved.axis curved.tangent_plane",
|
|
"Vase/F2:side:l3#1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l3#2": "curved.axis curved.tangent_plane",
|
|
"Vase/F2:side:l3#2|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l3#3": "curved.axis curved.tangent_plane",
|
|
"Vase/F2:side:l3#3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Vase/F2:side:l4": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Vase/body": "body.copy body.mirror body.move body.pattern",
|
|
"Vase/v[F2:side:a1#1 & F2:side:a1#2 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:a1#1 & F2:side:a1#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:a1#1 & F2:side:a1#3 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:a1#1 & F2:side:a1#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:a1#2 & F2:side:a1#3 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:a1#2 & F2:side:a1#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Vase/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/05-taper-extrude": {
|
|
"Frustum/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frustum/F2:start": "face.angle_plane !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frustum/F2:top": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frustum/body": "body.copy body.mirror body.move body.pattern",
|
|
"Frustum/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Frustum/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/06-symmetric-extrude": {
|
|
"Block/F2:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/body": "body.copy body.mirror body.move body.pattern",
|
|
"Block/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/07-fillet-all-edges": {
|
|
"Box/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:start|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]|F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4|F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:start": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]|F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:start & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/08-chamfer": {
|
|
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:top": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:top": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l2|F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:top": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l3|F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l4|F2:top": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/09-shell": {
|
|
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2]": "vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4]": "vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/10-rect-pattern-holes": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/11-circular-pattern-flange": {
|
|
"Flange/F2:side:c_in#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:c_in#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_in#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_in#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:c_in#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_in#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_out#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:c_out#1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_out#1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_out#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:c_out#2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:c_out#2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Flange/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Flange/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/body": "body.copy body.mirror body.move body.pattern",
|
|
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start]": "vertex.point",
|
|
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start] (2)": "vertex.point",
|
|
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top]": "vertex.point",
|
|
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top] (2)": "vertex.point",
|
|
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start]": "vertex.point",
|
|
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start] (2)": "vertex.point",
|
|
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top]": "vertex.point",
|
|
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top] (2)": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/12-mirror-feature": {
|
|
"Base/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Base/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Base/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Base/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Base/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Base/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Base/F4:top": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Base/F4:[email protected]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Base/body": "body.copy body.mirror body.move body.pattern",
|
|
"Base/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Base/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Base/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Base/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Base/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Base/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
|
|
"Base/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
|
|
"Base/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
|
|
"Base/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/13-combine-join": {
|
|
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l1|F2:side:l2#[F2:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l2#[F2:side:l1]|F2:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l1]|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l1]|F4:side:c1#2#[F2:side:l2,F2:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l2#[F2:side:l3]|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l3]|F2:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l3]|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2#[F2:side:l3]|F4:side:c1#1#[F2:side:l2,F2:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"A/F2:start|F4:side:c1#1#[F2:side:l2,F2:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start|F4:side:c1#2#[F2:side:l2,F2:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:top|F4:side:c1#1#[F2:top,F4:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:top|F4:side:c1#2#[F2:top,F4:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:c1#1#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
|
|
"A/F4:side:c1#1#[F2:top,F4:top]": "curved.axis curved.tangent_plane",
|
|
"A/F4:side:c1#1#[F2:top,F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:c1#1#[F4:top]": "curved.axis curved.tangent_plane",
|
|
"A/F4:side:c1#1#[F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:c1#2#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
|
|
"A/F4:side:c1#2#[F2:top,F4:top]": "curved.axis curved.tangent_plane",
|
|
"A/F4:side:c1#2#[F2:top,F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:c1#2#[F4:top]": "curved.axis curved.tangent_plane",
|
|
"A/F4:side:c1#2#[F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/body": "body.copy body.mirror body.move body.pattern",
|
|
"A/v[F2:side:l1 & F2:side:l2#[F2:side:l1] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l2#[F2:side:l1] & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2#[F2:side:l1] & F2:start & F4:side:c1#2#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2#[F2:side:l1] & F2:top & F4:side:c1#2#[F2:side:l2,F2:start] & F4:side:c1#2#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2#[F2:side:l3] & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2#[F2:side:l3] & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2#[F2:side:l3] & F2:start & F4:side:c1#1#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2#[F2:side:l3] & F2:top & F4:side:c1#1#[F2:side:l2,F2:start] & F4:side:c1#1#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start & F4:side:c1#1#[F2:side:l2,F2:start] & F4:side:c1#2#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:top & F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#2#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#1#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#2#[F2:top,F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F4:side:c1#1#[F4:top] & F4:side:c1#2#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F4:side:c1#2#[F2:top,F4:top] & F4:side:c1#2#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/14-combine-cut": {
|
|
"A/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:start|F4:side:a1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start|F4:side:a1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start|F4:side:a1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start|F4:side:a1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:a1#1": "curved.tangent_plane",
|
|
"A/F4:side:a1#2": "curved.tangent_plane",
|
|
"A/F4:side:a1#3": "curved.tangent_plane",
|
|
"A/F4:side:a1#4": "curved.tangent_plane",
|
|
"A/F4:side:a1#6": "curved.tangent_plane",
|
|
"A/body": "body.copy body.mirror body.move body.pattern",
|
|
"A/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start & F4:side:a1#1 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start & F4:side:a1#1 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start & F4:side:a1#2 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start & F4:side:a1#2 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/15-combine-intersect": {
|
|
"A/F2:bottom": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"A/F2:bottom|F4:side:a1#6~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F4:side:a1#6~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"A/F2:side:l1|F4:side:a1#4~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F4:side:a1#4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"A/F2:side:l2|F4:side:a1#1~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2|F4:side:a1#1~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"A/F2:side:l3|F4:side:a1#3~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3|F4:side:a1#3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l4": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"A/F2:side:l4|F4:side:a1#2~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l4|F4:side:a1#2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:top": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"A/F2:top|F4:side:a1#5~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:top|F4:side:a1#5~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:a1#1": "curved.tangent_plane",
|
|
"A/F4:side:a1#3": "curved.tangent_plane",
|
|
"A/F4:side:a1#4": "curved.tangent_plane",
|
|
"A/F4:side:a1#5": "curved.tangent_plane",
|
|
"A/F4:side:a1#6": "curved.tangent_plane",
|
|
"A/body": "body.copy body.mirror body.move body.pattern",
|
|
"A/v[F2:bottom & F4:side:a1#6]": "vertex.point",
|
|
"A/v[F2:bottom & F4:side:a1#6] (2)": "vertex.point",
|
|
"A/v[F2:side:l1 & F4:side:a1#4]": "vertex.point",
|
|
"A/v[F2:side:l1 & F4:side:a1#4] (2)": "vertex.point",
|
|
"A/v[F2:side:l2 & F4:side:a1#1]": "vertex.point",
|
|
"A/v[F2:side:l2 & F4:side:a1#1] (2)": "vertex.point",
|
|
"A/v[F2:side:l3 & F4:side:a1#3]": "vertex.point",
|
|
"A/v[F2:side:l3 & F4:side:a1#3] (2)": "vertex.point",
|
|
"A/v[F2:side:l4 & F4:side:a1#2]": "vertex.point",
|
|
"A/v[F2:side:l4 & F4:side:a1#2] (2)": "vertex.point",
|
|
"A/v[F2:top & F4:side:a1#5]": "vertex.point",
|
|
"A/v[F2:top & F4:side:a1#5] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/16-sweep": {
|
|
"Tube/F3:end": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Tube/F3:end|F3:side:c1#[F3:end]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F3:end|F3:side:c1#[F3:end]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F3:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#1|F3:side:c1#[F3:start]#2": "edge.normal_plane edge.project",
|
|
"Tube/F3:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#2|F3:side:c1#[F3:start]#1": "edge.normal_plane edge.project",
|
|
"Tube/F3:side:c1#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#3|F3:side:c1#[F3:end]#2": "edge.normal_plane edge.project",
|
|
"Tube/F3:side:c1#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#4|F3:side:c1#[F3:end]#1": "edge.normal_plane edge.project",
|
|
"Tube/F3:side:c1#[F3:end]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#[F3:end]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#[F3:start]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#[F3:start]#1|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F3:side:c1#[F3:start]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F3:side:c1#[F3:start]#2|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F3:start": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Tube/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tube/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
|
|
"Tube/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
|
|
"Tube/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.point",
|
|
"Tube/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2] (2)": "vertex.point",
|
|
"Tube/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
|
|
"Tube/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
|
|
"Tube/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start]": "vertex.point",
|
|
"Tube/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/17-loft": {
|
|
"Loft/F4:end": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Loft/F4:end|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:end|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:end|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:end|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l1|F4:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l1|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l1|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l2|F4:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l2|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l3|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l3|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l4|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Loft/body": "body.copy body.mirror body.move body.pattern",
|
|
"Loft/v[F4:end & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:end & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:end & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:end & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/18-hole-features": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:start|F3:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F3:face:5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top|F3:face:6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F3:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F5:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F5:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F5:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:4": "curved.axis curved.tangent_plane",
|
|
"Plate/F3:face:4|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:5": "curved.axis curved.tangent_plane",
|
|
"Plate/F3:face:5|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:6": "curved.axis curved.tangent_plane",
|
|
"Plate/F3:face:6|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:7": "curved.axis curved.tangent_plane",
|
|
"Plate/F3:face:7|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:9": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:11": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:11|F4:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:11|F4:face:14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:12": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:12|F4:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:12|F4:face:14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:13": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:14": "curved.axis curved.tangent_plane",
|
|
"Plate/F5:face:15": "!curved.axis !curved.tangent_plane",
|
|
"Plate/F5:face:15|F5:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F5:face:16": "curved.axis curved.tangent_plane",
|
|
"Plate/F5:face:17": "!curved.axis !curved.tangent_plane",
|
|
"Plate/F5:face:17|F5:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F5:face:18": "curved.axis curved.tangent_plane",
|
|
"Plate/F5:face:19": "!curved.axis !curved.tangent_plane",
|
|
"Plate/F5:face:19|F5:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F5:face:20": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F3:face:4 & F3:face:5]": "vertex.point",
|
|
"Plate/v[F2:start & F3:face:4 & F3:face:5] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:13 & F4:face:14]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:13 & F4:face:14] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F3:face:6 & F3:face:7]": "vertex.point",
|
|
"Plate/v[F2:top & F3:face:6 & F3:face:7] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:11 & F4:face:12]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:11 & F4:face:12] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F5:face:16 & F5:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F5:face:16 & F5:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F5:face:18 & F5:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F3:face:4 & F3:face:5 & F3:face:9]": "vertex.point",
|
|
"Plate/v[F3:face:4 & F3:face:5 & F3:face:9] (2)": "vertex.point",
|
|
"Plate/v[F3:face:6 & F3:face:7 & F3:face:9]": "vertex.point",
|
|
"Plate/v[F3:face:6 & F3:face:7 & F3:face:9] (2)": "vertex.point",
|
|
"Plate/v[F4:face:11 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F4:face:11 & F4:face:12 & F4:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F4:face:11 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F4:face:12 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F5:face:15 & F5:face:16 & F5:face:17 & F5:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F5:face:15 & F5:face:16 & F5:face:19 & F5:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F5:face:17 & F5:face:18 & F5:face:19 & F5:face:20]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/19-l-bracket-constrained": {
|
|
"LBracket/F2:side:l1": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"LBracket/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"LBracket/F2:side:l1|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"LBracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"LBracket/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"LBracket/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"LBracket/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"LBracket/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l4": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"LBracket/F2:side:l4|F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l4|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"LBracket/F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"LBracket/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"LBracket/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
|
|
"LBracket/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"LBracket/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"LBracket/F2:top": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"LBracket/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"LBracket/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"LBracket/v[F2:side:l1 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l1 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l4 & F2:side:l5 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l4 & F2:side:l5 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"LBracket/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"LBracket/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/20-slot-constrained": {
|
|
"Slot/F2:side:a1": "curved.axis curved.tangent_plane",
|
|
"Slot/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Slot/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2": "curved.axis curved.tangent_plane",
|
|
"Slot/F2:side:a2|F2:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2|F2:side:l2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Slot/F2:side:a2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Slot/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Slot/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Slot/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Slot/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Slot/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Slot/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole !face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Slot/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Slot/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
|
|
"Slot/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Slot/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Slot/v[F2:side:a1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/21-draft": {
|
|
"Box/F2:side:l1": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:top": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/22-split-body": {
|
|
"Cyl (1)/F2:bottom": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Cyl (1)/F2:bottom|F2:side:c1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl (1)/F2:bottom|F4:face:2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl (1)/F2:side:c1": "curved.axis curved.tangent_plane",
|
|
"Cyl (1)/F2:side:c1|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl (1)/F4:face:2": "curved.axis curved.tangent_plane",
|
|
"Cyl (1)/F4:face:2|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl (1)/F4:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Cyl (1)/body": "body.copy body.mirror body.move body.pattern",
|
|
"Cyl (1)/v[F2:bottom & F2:side:c1 & F4:face:2]": "vertex.point",
|
|
"Cyl (1)/v[F2:bottom & F2:side:c1 & F4:face:2] (2)": "vertex.point",
|
|
"Cyl (1)/v[F2:side:c1 & F4:face:2 & F4:face:3]": "vertex.point",
|
|
"Cyl (1)/v[F2:side:c1 & F4:face:2 & F4:face:3] (2)": "vertex.point",
|
|
"Cyl/F2:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Cyl/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Cyl/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#2|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:top": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Cyl/F4:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Cyl/body": "body.copy body.mirror body.move body.pattern",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F4:face:3]": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F4:face:3] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/23-bracket-multifeature": {
|
|
"Bracket/F10:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Bracket/F10:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Bracket/F10:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Bracket/F10:side:c2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Bracket/F10:side:c2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F10:side:c2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Bracket/F12:side:c1#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c1#1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Bracket/F12:side:c1#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c1#2|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Bracket/F12:side:c2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c2#1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Bracket/F12:side:c2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F12:side:c2#2|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F4:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l4|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l4|F4:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l4|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F2:top|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F8:bottom": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F8:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F4:side:l1|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F4:side:l1|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F4:side:l1|F8:bottom": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F4:side:l1|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F4:side:l1|F8:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F4:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "curved.axis curved.tangent_plane",
|
|
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]|F8:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "curved.axis curved.tangent_plane",
|
|
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]|F8:bottom": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F8:bottom": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F8:bottom|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F8:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F8:side:l2|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F8:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/body": "body.copy body.mirror body.move body.pattern",
|
|
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:start]": "vertex.point",
|
|
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:start] (2)": "vertex.point",
|
|
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:top]": "vertex.point",
|
|
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:start]": "vertex.point",
|
|
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:start] (2)": "vertex.point",
|
|
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:top]": "vertex.point",
|
|
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:top] (2)": "vertex.point",
|
|
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F2:side:l3]": "vertex.point",
|
|
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F2:side:l3] (2)": "vertex.point",
|
|
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F4:side:l1]": "vertex.point",
|
|
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F4:side:l1] (2)": "vertex.point",
|
|
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F2:side:l3]": "vertex.point",
|
|
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F2:side:l3] (2)": "vertex.point",
|
|
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F4:side:l1]": "vertex.point",
|
|
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F4:side:l1] (2)": "vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F4:side:l1 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l3 & F2:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l4 & F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l4 & F4:side:l1 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l4 & F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top] & F8:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom] & F8:bottom]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:top & F8:bottom & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:top & F8:side:l2 & F8:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top] & F8:top]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom] & F8:bottom]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F4:side:l1 & F8:bottom & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F4:side:l1 & F8:side:l2 & F8:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/24-user-parameters": {
|
|
"Block/F2:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Block/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Block/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F2:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Block/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
|
|
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
|
|
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
|
|
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point vertex.point+edit",
|
|
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/25-sketch-triangle": {
|
|
"Triangle/F2:side:l1": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Triangle/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l1|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l2": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Triangle/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l2|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Triangle/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Triangle/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Triangle/F2:top": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Triangle/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Triangle/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Triangle/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Triangle/v[F2:side:l1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Triangle/v[F2:side:l1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Triangle/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Triangle/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"design": "load"
|
|
},
|
|
"oracle/26-sketch-belt": {
|
|
"Belt/F2:side:c1": "curved.axis curved.tangent_plane",
|
|
"Belt/F2:side:c1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Belt/F2:side:c1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Belt/F2:side:c1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Belt/F2:side:c1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:c2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Belt/F2:side:c2|F2:side:l1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Belt/F2:side:c2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Belt/F2:side:c2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:c2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:c3#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Belt/F2:side:c3#1|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Belt/F2:side:c3#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:c3#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Belt/F2:side:c3#2|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Belt/F2:side:c3#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Belt/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Belt/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Belt/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Belt/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Belt/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Belt/body": "body.copy body.mirror body.move body.pattern",
|
|
"Belt/v[F2:side:c1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Belt/v[F2:side:c1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Belt/v[F2:side:c1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Belt/v[F2:side:c1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Belt/v[F2:side:c2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Belt/v[F2:side:c2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Belt/v[F2:side:c2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Belt/v[F2:side:c2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:start]": "vertex.point",
|
|
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:start] (2)": "vertex.point",
|
|
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:top]": "vertex.point",
|
|
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/27-sketch-trapezoid": {
|
|
"Trapezoid/F2:side:h1#1": "curved.axis curved.tangent_plane",
|
|
"Trapezoid/F2:side:h1#1|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:h1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Trapezoid/F2:side:h1#2": "curved.axis curved.tangent_plane",
|
|
"Trapezoid/F2:side:h1#2|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:h1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Trapezoid/F2:side:h2#1": "curved.axis curved.tangent_plane",
|
|
"Trapezoid/F2:side:h2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:h2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Trapezoid/F2:side:h2#2": "curved.axis curved.tangent_plane",
|
|
"Trapezoid/F2:side:h2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:h2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Trapezoid/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Trapezoid/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Trapezoid/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Trapezoid/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Trapezoid/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Trapezoid/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Trapezoid/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Trapezoid/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Trapezoid/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:side:l4|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Trapezoid/F2:start": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Trapezoid/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Trapezoid/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:start]": "vertex.point",
|
|
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:start] (2)": "vertex.point",
|
|
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:top]": "vertex.point",
|
|
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:top] (2)": "vertex.point",
|
|
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:start]": "vertex.point",
|
|
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:start] (2)": "vertex.point",
|
|
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:top]": "vertex.point",
|
|
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:top] (2)": "vertex.point",
|
|
"Trapezoid/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Trapezoid/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Trapezoid/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Trapezoid/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Trapezoid/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Trapezoid/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Trapezoid/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Trapezoid/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/28-blind-pocket-fillets": {
|
|
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F5:blend:F4:side:l1|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F5:blend:F4:side:l1|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F5:blend:F4:side:l2|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F5:blend:F4:side:l3|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:bottom": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:side:l1|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F5:blend:F4:side:l1|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F6:blend:F4:bottom|F4:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:side:l2|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l2|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l2|F6:blend:F4:bottom|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:side:l3|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l3|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l3|F6:blend:F4:bottom|F4:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:side:l4|F5:blend:F4:side:l1|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l4|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l4|F6:blend:F4:bottom|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
|
|
"Block/F5:blend:F4:side:l1|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
|
|
"Block/F5:blend:F4:side:l1|F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Block/F5:blend:F4:side:l1|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
|
|
"Block/F5:blend:F4:side:l2|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
|
|
"Block/F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Block/F5:blend:F4:side:l3|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l1": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F4:side:l1|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l1|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l2": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l3": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
|
|
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Block/body": "body.copy body.mirror body.move body.pattern",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4 & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3 & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3 & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4 & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4 & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4 & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/29-two-sided-and-partial-revolve": {
|
|
"Block/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:top~1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:top~2": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:end": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:side:l2#[F2:top,F4:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:side:l2#[F2:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:side:l2#[F4:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:side:l4#[F4:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:side:l4#[F4:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F2:top|F4:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l2#[F2:top,F4:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l2#[F2:top]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:end": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:end|F4:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:end|F4:side:l2#[F4:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:end|F4:side:l4#[F4:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:side:l1|F4:side:l2#[F2:top,F4:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F4:side:l2#[F2:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F4:side:l2#[F4:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F4:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F4:side:l4#[F4:end]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F4:side:l4#[F4:start]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l1|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l2#[F2:top,F4:start]": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:l2#[F2:top,F4:start]|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:l2#[F2:top]": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:l2#[F4:end]": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:l4#[F4:end]": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:l4#[F4:start]": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:l4#[F4:start]|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:start": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/body": "body.copy body.mirror body.move body.pattern",
|
|
"Block/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:top & F4:side:l2#[F2:top,F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:top & F4:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:end & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:end & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:side:l2#[F2:top,F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:side:l2#[F2:top] & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:side:l4 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:side:l4 & F4:side:l4#[F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F4:side:l4#[F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l1 & F4:side:l2#[F2:top,F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:l1 & F4:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:end & F4:side:l1 & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:end & F4:side:l1 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F4:side:l2#[F2:top,F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F4:side:l2#[F2:top] & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F4:side:l4 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F4:side:l4 & F4:side:l4#[F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:side:l1 & F4:side:l4#[F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/30-fillet-after-shell": {
|
|
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F4:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F4:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F4:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F4:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:start|F4:blend:F2:side:l1|F2:side:l2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F4:blend:F2:side:l1|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F4:blend:F2:side:l2|F2:side:l3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F4:blend:F2:side:l3|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l1|F2:side:l2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l1|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l2|F2:side:l3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l3|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l1|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l1|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l1|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l2|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l3|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l4|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l1|F2:side:l2~2": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l1|F2:side:l4~2": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l2|F2:side:l3~2": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l3|F2:side:l4~2": "curved.axis curved.tangent_plane",
|
|
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Box/F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:start & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:start & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:top & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:top & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:start & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:start & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:top & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:top & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:start & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:start & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:top & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:top & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:start & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:start & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:top & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:top & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2 & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2 & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3 & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3 & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/31-fillet-l-all-edges": {
|
|
"L/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"L/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l2": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l2|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l2|F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l3|F3:blend:F2:side:l3|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l4": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l4|F3:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l4|F3:blend:F2:side:l4|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l5": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l5|F3:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l5|F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l5|F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l6": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l6|F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l6|F3:blend:F2:side:l6|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:side:l6|F3:blend:F2:side:l6|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"L/F2:start|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:start|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:start|F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F2:start|F3:blend:F2:side:l3|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:start|F3:blend:F2:side:l4|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:start|F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:start|F3:blend:F2:side:l6|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"L/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:top|F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:top|F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:top|F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "edge.axis edge.normal_plane edge.project",
|
|
"L/F2:top|F3:blend:F2:side:l6|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l1|F2:side:l2|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l2|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]|F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]|F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l1|F2:start": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l6|F2:start": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l6|F2:top": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:start": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:side:l3|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:side:l3|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]|F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]|F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:start": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l3|F2:start": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l4|F2:side:l5": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l4|F2:side:l5|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l4|F2:side:l5|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l4|F2:start": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l4|F2:start|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l4|F2:top|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:side:l6": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:side:l6|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:side:l6|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l6|F2:start": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l6|F2:top": "edge.normal_plane edge.project",
|
|
"L/F3:blend:F2:side:l6|F2:start": "curved.axis curved.tangent_plane",
|
|
"L/F3:blend:F2:side:l6|F2:top": "curved.axis curved.tangent_plane",
|
|
"L/body": "body.copy body.mirror body.move body.pattern",
|
|
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l4 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l4|F2:start & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l4 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l4|F2:top & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l5 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l5 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l6 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l6 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l4|F2:start & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:start & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l4|F2:top & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/32-boss-plate-fillets": {
|
|
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:top|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
|
|
"Part/F2:top|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
|
|
"Part/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Part/F4:side:c1#1|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
|
|
"Part/F4:side:c1#1|F6:blend:F4:side:c1#1|F4:top": "edge.normal_plane edge.project",
|
|
"Part/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Part/F4:side:c1#2|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
|
|
"Part/F4:side:c1#2|F6:blend:F4:side:c1#2|F4:top": "edge.normal_plane edge.project",
|
|
"Part/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Part/F4:top|F6:blend:F4:side:c1#1|F4:top": "edge.normal_plane edge.project",
|
|
"Part/F4:top|F6:blend:F4:side:c1#2|F4:top": "edge.normal_plane edge.project",
|
|
"Part/F5:blend:F2:top|F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Part/F5:blend:F2:top|F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Part/F6:blend:F4:side:c1#1|F4:top": "curved.axis curved.tangent_plane",
|
|
"Part/F6:blend:F4:side:c1#2|F4:top": "curved.axis curved.tangent_plane",
|
|
"Part/body": "body.copy body.mirror body.move body.pattern",
|
|
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
|
|
"Part/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
|
|
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
|
|
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
|
|
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top]": "vertex.point",
|
|
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top] (2)": "vertex.point",
|
|
"Part/v[F4:top & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top]": "vertex.point",
|
|
"Part/v[F4:top & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/33-fillet-tangent-chain": {
|
|
"Slot/F2:side:a1": "curved.axis curved.tangent_plane",
|
|
"Slot/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:a1|F3:blend:F2:side:a1|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F2:side:a1|F4:blend:F2:side:a1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2": "curved.axis curved.tangent_plane",
|
|
"Slot/F2:side:a2|F2:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2|F3:blend:F2:side:a2|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F2:side:a2|F4:blend:F2:side:a2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Slot/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:l1|F4:blend:F2:side:l1|F2:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Slot/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:side:l2|F4:blend:F2:side:l2|F2:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Slot/F2:start|F4:blend:F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:start|F4:blend:F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Slot/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Slot/F2:top|F3:blend:F2:side:a1|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F2:top|F3:blend:F2:side:a2|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F3:blend:F2:side:a1|F2:top": "curved.axis curved.tangent_plane",
|
|
"Slot/F3:blend:F2:side:a1|F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F3:blend:F2:side:a1|F2:top|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F3:blend:F2:side:a2|F2:top": "curved.axis curved.tangent_plane",
|
|
"Slot/F3:blend:F2:side:a2|F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F3:blend:F2:side:a2|F2:top|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
|
|
"Slot/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
|
|
"Slot/F3:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
|
|
"Slot/F4:blend:F2:side:a1|F2:start": "curved.axis curved.tangent_plane",
|
|
"Slot/F4:blend:F2:side:a1|F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F4:blend:F2:side:a1|F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F4:blend:F2:side:a2|F2:start": "curved.axis curved.tangent_plane",
|
|
"Slot/F4:blend:F2:side:a2|F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F4:blend:F2:side:a2|F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.normal_plane edge.project",
|
|
"Slot/F4:blend:F2:side:l1|F2:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Slot/F4:blend:F2:side:l2|F2:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Slot/body": "body.copy body.mirror body.move body.pattern",
|
|
"Slot/v[F2:side:a1 & F2:side:l1 & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a1 & F2:side:l1 & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a1 & F2:side:l2 & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a1 & F2:side:l2 & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l1 & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l1 & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l2 & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:side:a2 & F2:side:l2 & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:start & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:start & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:start & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:start & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:top & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:top & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:top & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Slot/v[F2:top & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/34-chamfer-then-fillet": {
|
|
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/35-fillet-curved-curved": {
|
|
"Tee/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tee/F2:bottom|F2:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:bottom|F2:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tee/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#1|F5:blend:F2:side:c1#1|F4:side:c1#1": "edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tee/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#2|F5:blend:F2:side:c1#2|F4:side:c1#2": "edge.normal_plane edge.project",
|
|
"Tee/F2:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tee/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F4:side:c1#1|F5:blend:F2:side:c1#1|F4:side:c1#1": "edge.normal_plane edge.project",
|
|
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F4:side:c1#2|F5:blend:F2:side:c1#2|F4:side:c1#2": "edge.normal_plane edge.project",
|
|
"Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tee/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2]": "vertex.point",
|
|
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2]": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
|
|
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
|
|
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2]": "vertex.point",
|
|
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/36-corner-blend-two-radii": {
|
|
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Box/F2:top|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l2|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l1|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l2|F2:side:l3|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F3:blend:F2:side:l3|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Box/F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/37-pyramid-apex-blend": {
|
|
"Pyramid/F4:side:l1": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:start": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l2": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Pyramid/F4:side:l2|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l2|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l2|F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l3": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Pyramid/F4:side:l3|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l3|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l3|F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l4": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Pyramid/F4:side:l4|F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l4|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:side:l4|F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Pyramid/F4:start|F5:blend:F4:side:l1|F4:start": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:start|F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:start|F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F4:start|F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l2|F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l2|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:start": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:start|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l1|F4:start|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l2|F4:side:l3|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l3|F4:side:l4|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "curved.axis curved.tangent_plane",
|
|
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
|
|
"Pyramid/body": "body.copy body.mirror body.move body.pattern",
|
|
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4 & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4 & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:start & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:start & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:start & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"Pyramid/v[F4:start & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/38-coincident-cylinders": {
|
|
"A/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:start|F6:face:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start|F6:face:2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F5:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F5:top|F6:face:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F5:top|F6:face:2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F6:face:1": "curved.axis curved.tangent_plane",
|
|
"A/F6:face:2": "curved.axis curved.tangent_plane",
|
|
"A/body": "body.copy body.mirror body.move body.pattern",
|
|
"A/v[F2:start & F6:face:1 & F6:face:2]": "vertex.point",
|
|
"A/v[F2:start & F6:face:1 & F6:face:2] (2)": "vertex.point",
|
|
"A/v[F5:top & F6:face:1 & F6:face:2]": "vertex.point",
|
|
"A/v[F5:top & F6:face:1 & F6:face:2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/39-tee-pipe": {
|
|
"Tee/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tee/F2:bottom|F2:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:bottom|F2:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tee/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tee/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:side:c1#2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tee/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F4:top": "face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tee/F4:top|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F4:top|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F6:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tee/F6:side:c1#1|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F6:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tee/F6:side:c1#2|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tee/F8:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tee/F8:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tee/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2]": "vertex.point",
|
|
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F2:bottom & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Tee/v[F2:bottom & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F2:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Tee/v[F2:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
|
|
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
|
|
"Tee/v[F4:top & F8:side:c1#1 & F8:side:c1#2]": "vertex.point",
|
|
"Tee/v[F4:top & F8:side:c1#1 & F8:side:c1#2] (2)": "vertex.point",
|
|
"Tee/v[F6:side:c1#1 & F6:side:c1#2 & F8:side:c1#1 & F8:side:c1#2]": "vertex.point",
|
|
"Tee/v[F6:side:c1#1 & F6:side:c1#2 & F8:side:c1#1 & F8:side:c1#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/40-box-sphere-torus": {
|
|
"A/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F4:side:a1#6~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:bottom|F4:side:a1#6~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"A/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#6": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"A/F2:start#[F4:side:a1]|F4:side:a1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]|F4:side:a1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]|F4:side:a1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]|F4:side:a1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]|F7:side:c1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F2:start#[F4:side:a1]|F7:side:c1#5": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"A/F4:side:a1#1": "curved.tangent_plane",
|
|
"A/F4:side:a1#2": "curved.tangent_plane",
|
|
"A/F4:side:a1#3": "curved.tangent_plane",
|
|
"A/F4:side:a1#4": "curved.tangent_plane",
|
|
"A/F4:side:a1#5": "curved.tangent_plane",
|
|
"A/F4:side:a1#6": "curved.tangent_plane",
|
|
"A/F7:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"A/F7:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"A/F7:side:c1#3": "curved.axis curved.tangent_plane",
|
|
"A/F7:side:c1#4": "curved.axis curved.tangent_plane",
|
|
"A/F7:side:c1#5": "curved.axis curved.tangent_plane",
|
|
"A/F7:side:c1#6": "curved.axis curved.tangent_plane",
|
|
"A/body": "body.copy body.mirror body.move body.pattern",
|
|
"A/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:bottom & F4:side:a1#6]": "vertex.point",
|
|
"A/v[F2:bottom & F4:side:a1#6] (2)": "vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l1 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l2 & F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:side:l3 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#2 & F7:side:c1#4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#2 & F7:side:c1#6]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#4 & F7:side:c1#6]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F4:side:a1#1 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F4:side:a1#1 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F4:side:a1#2 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F4:side:a1#2 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F7:side:c1#1 & F7:side:c1#3]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F7:side:c1#1 & F7:side:c1#5]": "vertex.plane_three_points vertex.point",
|
|
"A/v[F2:start#[F4:side:a1] & F7:side:c1#3 & F7:side:c1#5]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/41-tube-radial-holes": {
|
|
"Tube/F2:side:c_in#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F2:side:c_in#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:c1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:c2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:c3#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#1|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F2:side:c_in#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:c1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:c2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:c3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_in#2|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F2:side:c_out#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:c1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:c2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:c3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#1|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F2:side:c_out#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:c1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:c2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:c3#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:side:c_out#2|F4:side:[email protected]#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tube/F2:start": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tube/F2:top": "face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tube/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c1#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c1#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c2#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c2#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c3#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c3#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c3#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:c3#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#4": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Tube/F4:side:[email protected]#4": "curved.axis curved.tangent_plane",
|
|
"Tube/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:c1#1 & F4:side:c1#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:c1#1 & F4:side:c1#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:c2#1 & F4:side:c2#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:c2#1 & F4:side:c2#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:c3#1 & F4:side:c3#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:c3#1 & F4:side:c3#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#1 & F4:side:[email protected]#1 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:c1#2 & F4:side:c1#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:c1#2 & F4:side:c1#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:c2#2 & F4:side:c2#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:c2#2 & F4:side:c2#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:c3#2 & F4:side:c3#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:c3#2 & F4:side:c3#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_in#2 & F4:side:[email protected]#2 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:c1#2 & F4:side:c1#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:c1#2 & F4:side:c1#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:c2#2 & F4:side:c2#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:c2#2 & F4:side:c2#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:c3#2 & F4:side:c3#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:c3#2 & F4:side:c3#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#1 & F4:side:[email protected]#2 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:c1#1 & F4:side:c1#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:c1#1 & F4:side:c1#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:c2#1 & F4:side:c2#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:c2#1 & F4:side:c2#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#3] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:c3#1 & F4:side:c3#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:c3#1 & F4:side:c3#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#4]": "vertex.point",
|
|
"Tube/v[F2:side:c_out#2 & F4:side:[email protected]#1 & F4:side:[email protected]#4] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/42-overlapping-patterns": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#[F8:face:10]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#[F8:face:13]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:22": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:23": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:24": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:25": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:27": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:28": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:31": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:34": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:47": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:48": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:52": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:53": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:54": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:61": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:62": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:63": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F8:face:9": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#[F8:face:10]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#[F8:face:13]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:22": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:23": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:24": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:25": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:27": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:28": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:31": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:34": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:47": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:48": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:52": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:53": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:54": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:61": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:62": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:63": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F8:face:9": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]|F8:face:52": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1|F7:side:c1#1": "edge.axis edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2|F7:side:c1#2": "edge.axis edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]|F8:face:63": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1|F7:side:c1#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2|F7:side:c1#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]|F8:face:24": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#[F8:face:10]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#[F8:face:10]|F8:face:10": "edge.axis edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#[F8:face:13]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#[F8:face:13]|F8:face:13": "edge.axis edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]|F8:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F7:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F7:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:10": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:10|F8:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:13": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:13|F8:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:14": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:22": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:22|F8:face:23": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:23": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:24": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:25": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:25|F8:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:27": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:28": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:31": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:31|F8:face:32": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:32": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:33": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:33|F8:face:34": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:34": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:44": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:44|F8:face:45": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:45": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:47": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:47|F8:face:48": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:48": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:52": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:53": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:53|F8:face:54": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:54": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:61": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:61|F8:face:62": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F8:face:62": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:63": "curved.axis curved.tangent_plane",
|
|
"Plate/F8:face:9": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:34]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#3 & F8:face:32 & F8:face:33]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F8:face:44 & F8:face:48]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:47]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:52]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:54]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F7:side:c1#1 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:61]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:63]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F7:side:c1#1]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#2 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#[F8:face:10] & F4:side:[email protected]#[F8:face:13] & F8:face:10 & F8:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#[F8:face:10] & F4:side:[email protected]#[F8:face:13]]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected] & F8:face:27]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F8:face:10 & F8:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:13 & F8:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:14 & F8:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:22 & F8:face:23]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:23 & F8:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:25 & F8:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:27 & F8:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:31 & F8:face:32]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:33 & F8:face:34]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:44 & F8:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:47 & F8:face:48]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:52 & F8:face:53]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:53 & F8:face:54]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:61 & F8:face:62]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F8:face:62 & F8:face:63]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:31]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:34]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#3 & F8:face:32 & F8:face:33]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F8:face:44 & F8:face:48]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:47]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:52]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:54]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F7:side:c1#1 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:61]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:63]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F7:side:c1#1]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#2 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected] & F8:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#[F8:face:10] & F4:side:[email protected]#[F8:face:13] & F8:face:10 & F8:face:13]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/43-cut-splits-body": {
|
|
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar (1)/F2:side:l4|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:start#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar (1)/F2:start#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar (1)/F2:top#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar (1)/F4:side:l4": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bar (1)/body": "body.copy body.mirror body.move body.pattern",
|
|
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:start#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:start#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:start#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:start#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar/F2:side:l2|F2:side:l3#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l2|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:start#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar/F2:start#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F2:top#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Bar/F2:top#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bar/F4:side:l2": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bar/body": "body.copy body.mirror body.move body.pattern",
|
|
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:side:l2 & F2:start#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:side:l2 & F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l3#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bar/v[F2:side:l3#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/44-shell-l-bracket": {
|
|
"L/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F2:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F2:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l4|F2:side:l5~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l4|F2:side:l5~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l5|F2:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l5|F2:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F2:top": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"L/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:top|F3:inner:F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F2:top|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l1|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F3:inner:F2:side:l4|F3:inner:F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l5": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F3:inner:F2:side:l5|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l5|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/F3:inner:F2:side:l6|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"L/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"L/body": "body.copy body.mirror body.move body.pattern",
|
|
"L/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F2:side:l2]": "vertex.point",
|
|
"L/v[F2:side:l1 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l1 & F2:side:l6]": "vertex.point",
|
|
"L/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"L/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"L/v[F2:side:l4 & F2:side:l5 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l4 & F2:side:l5 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l4 & F2:side:l5]": "vertex.point",
|
|
"L/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:side:l5 & F2:side:l6]": "vertex.point",
|
|
"L/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:inner:F2:side:l4 & F3:inner:F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F2:top & F3:inner:F2:side:l5 & F3:inner:F2:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l6 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F3:inner:F2:side:l4 & F3:inner:F2:side:l5 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"L/v[F3:inner:F2:side:l5 & F3:inner:F2:side:l6 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/45-shell-boss-plate": {
|
|
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:start": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Part/F2:start|F5:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:start|F5:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:start|F5:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:start|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Part/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Part/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F5:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F5:inner:F2:side:l1|F5:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l1|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l1|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F5:inner:F2:side:l2|F5:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l2|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F5:inner:F2:side:l3|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l3|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F5:inner:F2:side:l4|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/F5:inner:F2:top|F5:inner:F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F2:top|F5:inner:F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Part/F5:inner:F4:side:c1#1|F5:inner:F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Part/F5:inner:F4:side:c1#2|F5:inner:F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Part/F5:inner:F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Part/body": "body.copy body.mirror body.move body.pattern",
|
|
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l2]": "vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l1 & F2:side:l4]": "vertex.point",
|
|
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"Part/v[F2:start & F5:inner:F2:side:l1 & F5:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:start & F5:inner:F2:side:l1 & F5:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:start & F5:inner:F2:side:l2 & F5:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:start & F5:inner:F2:side:l3 & F5:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Part/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
|
|
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
|
|
"Part/v[F5:inner:F2:side:l1 & F5:inner:F2:side:l2 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F5:inner:F2:side:l1 & F5:inner:F2:side:l4 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F5:inner:F2:side:l2 & F5:inner:F2:side:l3 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F5:inner:F2:side:l3 & F5:inner:F2:side:l4 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Part/v[F5:inner:F2:top & F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2]": "vertex.point",
|
|
"Part/v[F5:inner:F2:top & F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2] (2)": "vertex.point",
|
|
"Part/v[F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2 & F5:inner:F4:top]": "vertex.point",
|
|
"Part/v[F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2 & F5:inner:F4:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/46-shell-two-open-faces": {
|
|
"Box/F2:side:l1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F2:top": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Box/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Box/body": "body.copy body.mirror body.move body.pattern",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l2]": "vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:side:l4]": "vertex.point",
|
|
"Box/v[F2:side:l1 & F2:start]": "vertex.point",
|
|
"Box/v[F2:side:l1 & F2:start] (2)": "vertex.point",
|
|
"Box/v[F2:side:l1 & F2:top & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F2:top & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l1 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Box/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/47-draft-curved-pocket": {
|
|
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:start": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F2:top|F4:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:bottom": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:bottom|F4:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F4:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:side:a1": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:a1|F4:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:a1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:a2": "curved.axis curved.tangent_plane",
|
|
"Block/F4:side:a2|F4:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:a2|F4:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Block/F4:side:l1": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:side:l2": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/body": "body.copy body.mirror body.move body.pattern",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:a1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:a1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:a2 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:top & F4:side:a2 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F4:side:a1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F4:side:a1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F4:side:a2 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:bottom & F4:side:a2 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/48-pulley": {
|
|
"Pulley/F2:side:l1#1|F2:side:l1#2": "edge.axis edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#1|F2:side:l1#3": "edge.axis edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#1|F2:side:l12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#2|F2:side:l1#3": "edge.axis edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#2|F2:side:l12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#2|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#3|F2:side:l12#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l1#3|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l10#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l10#1|F2:side:l11#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l10#1|F2:side:l9#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l10#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l10#2|F2:side:l11#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l10#2|F2:side:l9#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l10#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l10#3|F2:side:l11#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l10#3|F2:side:l9#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l11#1|F2:side:l11#2": "edge.axis edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l11#1|F2:side:l11#3": "edge.axis edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l11#1|F2:side:l12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l11#2|F2:side:l11#3": "edge.axis edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l11#2|F2:side:l12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l11#3|F2:side:l12#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l12#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l12#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l12#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l2#1|F2:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l2#2|F2:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l2#3|F2:side:l3#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l3#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l3#1|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l3#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l3#2|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l3#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l3#3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l4#1|F2:side:l5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l4#2|F2:side:l5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l4#3|F2:side:l5#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l5#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l5#1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l5#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l5#2|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l5#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l5#3|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l6#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l6#1|F2:side:l7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l6#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l6#2|F2:side:l7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l6#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l6#3|F2:side:l7#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l7#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l7#1|F2:side:l8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l7#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l7#2|F2:side:l8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l7#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l7#3|F2:side:l8#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l8#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l8#1|F2:side:l9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l8#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l8#2|F2:side:l9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l8#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l8#3|F2:side:l9#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Pulley/F2:side:l9#1": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l9#2": "curved.axis curved.tangent_plane",
|
|
"Pulley/F2:side:l9#3": "curved.axis curved.tangent_plane",
|
|
"Pulley/body": "body.copy body.mirror body.move body.pattern",
|
|
"Pulley/v[F2:side:l1#1 & F2:side:l1#2 & F2:side:l12#1 & F2:side:l12#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l1#1 & F2:side:l1#2 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l1#1 & F2:side:l1#3 & F2:side:l12#1 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l1#1 & F2:side:l1#3 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l1#2 & F2:side:l1#3 & F2:side:l12#2 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l1#2 & F2:side:l1#3 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l10#1 & F2:side:l10#2 & F2:side:l11#1 & F2:side:l11#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l10#1 & F2:side:l10#2 & F2:side:l9#1 & F2:side:l9#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l10#1 & F2:side:l10#3 & F2:side:l11#1 & F2:side:l11#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l10#1 & F2:side:l10#3 & F2:side:l9#1 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l10#2 & F2:side:l10#3 & F2:side:l11#2 & F2:side:l11#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l10#2 & F2:side:l10#3 & F2:side:l9#2 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l11#1 & F2:side:l11#2 & F2:side:l12#1 & F2:side:l12#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l11#1 & F2:side:l11#3 & F2:side:l12#1 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l11#2 & F2:side:l11#3 & F2:side:l12#2 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5#1 & F2:side:l5#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5#1 & F2:side:l5#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5#2 & F2:side:l5#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l5#1 & F2:side:l5#2 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l5#1 & F2:side:l5#3 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l5#2 & F2:side:l5#3 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l6#1 & F2:side:l6#2 & F2:side:l7#1 & F2:side:l7#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l6#1 & F2:side:l6#3 & F2:side:l7#1 & F2:side:l7#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l6#2 & F2:side:l6#3 & F2:side:l7#2 & F2:side:l7#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l7#1 & F2:side:l7#2 & F2:side:l8#1 & F2:side:l8#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l7#1 & F2:side:l7#3 & F2:side:l8#1 & F2:side:l8#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l7#2 & F2:side:l7#3 & F2:side:l8#2 & F2:side:l8#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l8#1 & F2:side:l8#2 & F2:side:l9#1 & F2:side:l9#2]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l8#1 & F2:side:l8#3 & F2:side:l9#1 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
|
|
"Pulley/v[F2:side:l8#2 & F2:side:l8#3 & F2:side:l9#2 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/49-helical-sweep": {
|
|
"Spring/F3:face:0|F3:face:2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Spring/F3:face:0|F3:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Spring/F3:face:1|F3:face:2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Spring/F3:face:1|F3:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Spring/F3:face:2": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Spring/F3:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Spring/body": "body.copy body.mirror body.move body.pattern",
|
|
"Spring/v[F3:face:0 & F3:face:1 & F3:face:2]": "vertex.point",
|
|
"Spring/v[F3:face:0 & F3:face:1 & F3:face:2] (2)": "vertex.point",
|
|
"Spring/v[F3:face:0 & F3:face:1 & F3:face:3]": "vertex.point",
|
|
"Spring/v[F3:face:0 & F3:face:1 & F3:face:3] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/50-sweep-tight-bend": {
|
|
"Bend/F3:end": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Bend/F3:end|F3:side:c1#[F3:end]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bend/F3:end|F3:side:c1#[F3:end]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#1|F3:side:c1#2~2": "!edge.chamfer !edge.fillet edge.normal_plane !edge.project",
|
|
"Bend/F3:side:c1#1|F3:side:c1#3": "edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#1|F3:side:c1#[F3:start]#2": "edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#2|F3:side:c1#4": "edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#2|F3:side:c1#[F3:start]#1": "edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#3": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#3|F3:side:c1#4~1": "!edge.chamfer !edge.fillet edge.normal_plane !edge.project",
|
|
"Bend/F3:side:c1#3|F3:side:c1#[F3:end]#2": "edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#4": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#4|F3:side:c1#[F3:end]#1": "edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#[F3:end]#1": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#[F3:end]#2": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#[F3:start]#1": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#[F3:start]#1|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bend/F3:side:c1#[F3:start]#2": "curved.axis curved.tangent_plane",
|
|
"Bend/F3:side:c1#[F3:start]#2|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bend/F3:start": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Bend/body": "body.copy body.mirror body.move body.pattern",
|
|
"Bend/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
|
|
"Bend/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
|
|
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.plane_three_points vertex.point",
|
|
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#3 & F3:side:c1#4]": "vertex.point",
|
|
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.point",
|
|
"Bend/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
|
|
"Bend/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start]": "vertex.point",
|
|
"Bend/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/51-loft-rect-circle-offset": {
|
|
"Loft/F4:end": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Loft/F4:end|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:end|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:end|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:end|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l1|F4:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l1|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l1|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l2|F4:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l2|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l3|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l3|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:side:l4|F4:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Loft/F4:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Loft/body": "body.copy body.mirror body.move body.pattern",
|
|
"Loft/v[F4:end & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:end & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:end & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:end & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"Loft/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/52-circular-pattern-fillet": {
|
|
"Hub/F2:side:c1#[F2:start]#1": "curved.axis curved.tangent_plane",
|
|
"Hub/F2:side:c1#[F2:start]#1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F2:side:c1#[F2:start]#2": "curved.axis curved.tangent_plane",
|
|
"Hub/F2:side:c1#[F2:start]#2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F2:side:c1#[F2:top]#1": "curved.axis curved.tangent_plane",
|
|
"Hub/F2:side:c1#[F2:top]#1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F2:side:c1#[F2:top]#2": "curved.axis curved.tangent_plane",
|
|
"Hub/F2:side:c1#[F2:top]#2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F2:start": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F2:top": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Hub/F2:top|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:26": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:27": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:28": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:29": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:30": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:31": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:32": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:33": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:34": "edge.normal_plane edge.project",
|
|
"Hub/F2:top|F6:face:35": "edge.normal_plane edge.project",
|
|
"Hub/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Hub/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F4:side:c1#1|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
|
|
"Hub/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Hub/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F4:side:c1#2|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
|
|
"Hub/F4:top": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F5:blend:F2:top|F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Hub/F5:blend:F2:top|F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:11": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:11|F6:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:11|F6:face:26": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:12": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:12|F6:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:12|F6:face:27": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:13": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F6:face:14": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:14|F6:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:14|F6:face:28": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:15": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:15|F6:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:15|F6:face:29": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:16": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F6:face:17": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:17|F6:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:17|F6:face:31": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:18": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:18|F6:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:18|F6:face:30": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:19": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F6:face:20": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:20|F6:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:20|F6:face:32": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:21": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:21|F6:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:21|F6:face:33": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:22": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F6:face:23": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:23|F6:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:23|F6:face:34": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:24": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:24|F6:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hub/F6:face:24|F6:face:35": "edge.normal_plane edge.project",
|
|
"Hub/F6:face:25": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Hub/F6:face:26": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:27": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:28": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:29": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:30": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:31": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:32": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:33": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:34": "curved.axis curved.tangent_plane",
|
|
"Hub/F6:face:35": "curved.axis curved.tangent_plane",
|
|
"Hub/body": "body.copy body.mirror body.move body.pattern",
|
|
"Hub/v[F2:side:c1#[F2:start]#1 & F2:side:c1#[F2:start]#2 & F2:start]": "vertex.point",
|
|
"Hub/v[F2:side:c1#[F2:start]#1 & F2:side:c1#[F2:start]#2 & F2:start] (2)": "vertex.point",
|
|
"Hub/v[F2:side:c1#[F2:top]#1 & F2:side:c1#[F2:top]#2 & F2:top]": "vertex.point",
|
|
"Hub/v[F2:side:c1#[F2:top]#1 & F2:side:c1#[F2:top]#2 & F2:top] (2)": "vertex.point",
|
|
"Hub/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
|
|
"Hub/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:26 & F6:face:27]": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:26 & F6:face:27] (2)": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:28 & F6:face:29]": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:28 & F6:face:29] (2)": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:30 & F6:face:31]": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:30 & F6:face:31] (2)": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:32 & F6:face:33]": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:32 & F6:face:33] (2)": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:34 & F6:face:35]": "vertex.point",
|
|
"Hub/v[F2:top & F6:face:34 & F6:face:35] (2)": "vertex.point",
|
|
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
|
|
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
|
|
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
|
|
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
|
|
"Hub/v[F6:face:11 & F6:face:12 & F6:face:13]": "vertex.point",
|
|
"Hub/v[F6:face:11 & F6:face:12 & F6:face:13] (2)": "vertex.point",
|
|
"Hub/v[F6:face:11 & F6:face:12 & F6:face:26 & F6:face:27]": "vertex.point",
|
|
"Hub/v[F6:face:11 & F6:face:12 & F6:face:26 & F6:face:27] (2)": "vertex.point",
|
|
"Hub/v[F6:face:14 & F6:face:15 & F6:face:16]": "vertex.point",
|
|
"Hub/v[F6:face:14 & F6:face:15 & F6:face:16] (2)": "vertex.point",
|
|
"Hub/v[F6:face:14 & F6:face:15 & F6:face:28 & F6:face:29]": "vertex.point",
|
|
"Hub/v[F6:face:14 & F6:face:15 & F6:face:28 & F6:face:29] (2)": "vertex.point",
|
|
"Hub/v[F6:face:17 & F6:face:18 & F6:face:19]": "vertex.point",
|
|
"Hub/v[F6:face:17 & F6:face:18 & F6:face:19] (2)": "vertex.point",
|
|
"Hub/v[F6:face:17 & F6:face:18 & F6:face:30 & F6:face:31]": "vertex.point",
|
|
"Hub/v[F6:face:17 & F6:face:18 & F6:face:30 & F6:face:31] (2)": "vertex.point",
|
|
"Hub/v[F6:face:20 & F6:face:21 & F6:face:22]": "vertex.point",
|
|
"Hub/v[F6:face:20 & F6:face:21 & F6:face:22] (2)": "vertex.point",
|
|
"Hub/v[F6:face:20 & F6:face:21 & F6:face:32 & F6:face:33]": "vertex.point",
|
|
"Hub/v[F6:face:20 & F6:face:21 & F6:face:32 & F6:face:33] (2)": "vertex.point",
|
|
"Hub/v[F6:face:23 & F6:face:24 & F6:face:25]": "vertex.point",
|
|
"Hub/v[F6:face:23 & F6:face:24 & F6:face:25] (2)": "vertex.point",
|
|
"Hub/v[F6:face:23 & F6:face:24 & F6:face:34 & F6:face:35]": "vertex.point",
|
|
"Hub/v[F6:face:23 & F6:face:24 & F6:face:34 & F6:face:35] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/53-path-pattern": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/54-mirror-body-fillets": {
|
|
"Bracket/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l1|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:[email protected]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:[email protected]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:[email protected]|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:[email protected]|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:side:l3|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
|
|
"Bracket/F2:start": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:start|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Bracket/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F2:top|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Bracket/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Bracket/F3:blend:F2:side:l1|F2:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Bracket/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Bracket/F3:blend:F2:side:l2|F2:side:[email protected]": "curved.axis curved.tangent_plane",
|
|
"Bracket/F5:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Bracket/F5:side:c1#[email protected]": "curved.axis curved.tangent_plane",
|
|
"Bracket/F5:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Bracket/F5:side:c1#[email protected]": "curved.axis curved.tangent_plane",
|
|
"Bracket/body": "body.copy body.mirror body.move body.pattern",
|
|
"Bracket/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:[email protected] & F2:start & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:[email protected] & F2:start & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:[email protected] & F2:top & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:[email protected] & F2:top & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Bracket/v[F2:start & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
|
|
"Bracket/v[F2:start & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
|
|
"Bracket/v[F2:start & F5:side:c1#[email protected] & F5:side:c1#[email protected]]": "vertex.point",
|
|
"Bracket/v[F2:start & F5:side:c1#[email protected] & F5:side:c1#[email protected]] (2)": "vertex.point",
|
|
"Bracket/v[F2:top & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
|
|
"Bracket/v[F2:top & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
|
|
"Bracket/v[F2:top & F5:side:c1#[email protected] & F5:side:c1#[email protected]]": "vertex.point",
|
|
"Bracket/v[F2:top & F5:side:c1#[email protected] & F5:side:c1#[email protected]] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/55-tapped-hole-cosmetic": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F3:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:10": "!curved.axis !curved.tangent_plane",
|
|
"Plate/F3:face:10|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:11": "curved.axis curved.tangent_plane",
|
|
"Plate/F3:face:6": "!curved.axis !curved.tangent_plane",
|
|
"Plate/F3:face:6|F3:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:7": "curved.axis curved.tangent_plane",
|
|
"Plate/F3:face:8": "!curved.axis !curved.tangent_plane",
|
|
"Plate/F3:face:8|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F3:face:9": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F3:face:11 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F3:face:11 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:top & F3:face:7 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F3:face:10 & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F3:face:10 & F3:face:11 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F3:face:6 & F3:face:7 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/56-holes-on-curved-face": {
|
|
"Cyl/F2:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Cyl/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F3:face:7": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F3:face:9": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F4:face:11": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F4:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#1|F4:face:15": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Cyl/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#2|F3:face:5": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:side:c1#2|F3:face:7": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Cyl/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Cyl/F3:face:4": "curved.axis curved.tangent_plane",
|
|
"Cyl/F3:face:4|F3:face:5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F3:face:5": "curved.axis curved.tangent_plane",
|
|
"Cyl/F3:face:6": "curved.axis curved.tangent_plane",
|
|
"Cyl/F3:face:6|F3:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F3:face:7": "curved.axis curved.tangent_plane",
|
|
"Cyl/F3:face:8": "curved.axis curved.tangent_plane",
|
|
"Cyl/F3:face:8|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F3:face:9": "curved.axis curved.tangent_plane",
|
|
"Cyl/F4:face:10": "!curved.axis !curved.tangent_plane",
|
|
"Cyl/F4:face:10|F4:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F4:face:11": "curved.axis curved.tangent_plane",
|
|
"Cyl/F4:face:12": "!curved.axis !curved.tangent_plane",
|
|
"Cyl/F4:face:12|F4:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F4:face:13": "curved.axis curved.tangent_plane",
|
|
"Cyl/F4:face:14": "!curved.axis !curved.tangent_plane",
|
|
"Cyl/F4:face:14|F4:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Cyl/F4:face:15": "curved.axis curved.tangent_plane",
|
|
"Cyl/body": "body.copy body.mirror body.move body.pattern",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F3:face:7 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F4:face:11 & F4:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F4:face:11 & F4:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F2:side:c1#1 & F4:face:13 & F4:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F2:side:c1#2 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F3:face:4 & F3:face:5 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F3:face:4 & F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F3:face:6 & F3:face:7 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F4:face:10 & F4:face:11 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F4:face:10 & F4:face:11 & F4:face:14 & F4:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Cyl/v[F4:face:12 & F4:face:13 & F4:face:14 & F4:face:15]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/57-hole-pattern-sketch-points": {
|
|
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:start|F4:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:start|F4:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Plate/F2:top|F4:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:26": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F2:top|F4:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:10": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:10|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:11": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:11|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:12": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:12|F4:face:30": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:13": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:13|F4:face:30": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:14": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:14|F4:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:15": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:15|F4:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:16": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:16|F4:face:30": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:17": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:17|F4:face:30": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:18": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:18|F4:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:19": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:19|F4:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:20": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:20|F4:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:21": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:21|F4:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:22": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:22|F4:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:23": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:23|F4:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:24": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:24|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:25": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:25|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:26": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:26|F4:face:31": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:27": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:27|F4:face:31": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:29": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:29|F4:face:6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:29|F4:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:30": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:31": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:31|F4:face:8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:31|F4:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:32": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:33": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:33|F4:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:33|F4:face:5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Plate/F4:face:34": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Plate/F4:face:4": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:5": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:6": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:7": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:8": "curved.axis curved.tangent_plane",
|
|
"Plate/F4:face:9": "curved.axis curved.tangent_plane",
|
|
"Plate/body": "body.copy body.mirror body.move body.pattern",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l2]": "vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l1 & F2:side:l4]": "vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Plate/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:10 & F4:face:11]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:10 & F4:face:11] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:12 & F4:face:13]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:12 & F4:face:13] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:14 & F4:face:15]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:14 & F4:face:15] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:4 & F4:face:5]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:4 & F4:face:5] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:6 & F4:face:7]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:6 & F4:face:7] (2)": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:8 & F4:face:9]": "vertex.point",
|
|
"Plate/v[F2:start & F4:face:8 & F4:face:9] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:16 & F4:face:17]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:16 & F4:face:17] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:18 & F4:face:19]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:18 & F4:face:19] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:20 & F4:face:21]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:20 & F4:face:21] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:22 & F4:face:23]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:22 & F4:face:23] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:24 & F4:face:25]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:24 & F4:face:25] (2)": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:26 & F4:face:27]": "vertex.point",
|
|
"Plate/v[F2:top & F4:face:26 & F4:face:27] (2)": "vertex.point",
|
|
"Plate/v[F4:face:10 & F4:face:11 & F4:face:32]": "vertex.point",
|
|
"Plate/v[F4:face:10 & F4:face:11 & F4:face:32] (2)": "vertex.point",
|
|
"Plate/v[F4:face:12 & F4:face:13 & F4:face:30]": "vertex.point",
|
|
"Plate/v[F4:face:12 & F4:face:13 & F4:face:30] (2)": "vertex.point",
|
|
"Plate/v[F4:face:14 & F4:face:15 & F4:face:34]": "vertex.point",
|
|
"Plate/v[F4:face:14 & F4:face:15 & F4:face:34] (2)": "vertex.point",
|
|
"Plate/v[F4:face:16 & F4:face:17 & F4:face:30]": "vertex.point",
|
|
"Plate/v[F4:face:16 & F4:face:17 & F4:face:30] (2)": "vertex.point",
|
|
"Plate/v[F4:face:18 & F4:face:19 & F4:face:33]": "vertex.point",
|
|
"Plate/v[F4:face:18 & F4:face:19 & F4:face:33] (2)": "vertex.point",
|
|
"Plate/v[F4:face:20 & F4:face:21 & F4:face:34]": "vertex.point",
|
|
"Plate/v[F4:face:20 & F4:face:21 & F4:face:34] (2)": "vertex.point",
|
|
"Plate/v[F4:face:22 & F4:face:23 & F4:face:29]": "vertex.point",
|
|
"Plate/v[F4:face:22 & F4:face:23 & F4:face:29] (2)": "vertex.point",
|
|
"Plate/v[F4:face:24 & F4:face:25 & F4:face:32]": "vertex.point",
|
|
"Plate/v[F4:face:24 & F4:face:25 & F4:face:32] (2)": "vertex.point",
|
|
"Plate/v[F4:face:26 & F4:face:27 & F4:face:31]": "vertex.point",
|
|
"Plate/v[F4:face:26 & F4:face:27 & F4:face:31] (2)": "vertex.point",
|
|
"Plate/v[F4:face:29 & F4:face:6 & F4:face:7]": "vertex.point",
|
|
"Plate/v[F4:face:29 & F4:face:6 & F4:face:7] (2)": "vertex.point",
|
|
"Plate/v[F4:face:31 & F4:face:8 & F4:face:9]": "vertex.point",
|
|
"Plate/v[F4:face:31 & F4:face:8 & F4:face:9] (2)": "vertex.point",
|
|
"Plate/v[F4:face:33 & F4:face:4 & F4:face:5]": "vertex.point",
|
|
"Plate/v[F4:face:33 & F4:face:4 & F4:face:5] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/58-phone-stand": {
|
|
"Stand/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:bottom|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l5~1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l5~2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l5~3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l6": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F2:side:l9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F3:blend:F2:side:l5|F2:side:l6": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F3:blend:F2:side:l8|F2:side:l9": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:bottom|F4:blend:F2:side:l4|F2:side:l5": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l10|F2:side:l9~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l10|F2:side:l9~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l10|F2:side:l9~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l10|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:side:l10~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:side:l10~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:side:l10~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l2|F2:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l4|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5~1": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5~2": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5~3": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Stand/F2:side:l5|F2:top~1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F2:top~2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F2:top~3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6~1": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6~2": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6~3": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5~1": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5~2": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5~3": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l5|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l6|F2:side:l7~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6|F2:side:l7~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6|F2:side:l7~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6~1": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6~2": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6~3": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l7|F2:side:l8~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l7|F2:side:l8~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l7|F2:side:l8~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:side:l8|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9~1": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9~2": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9~3": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l9": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Stand/F2:side:l9|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9~1": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9~2": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9~3": "edge.axis edge.normal_plane edge.project",
|
|
"Stand/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Stand/F2:top|F3:blend:F2:side:l5|F2:side:l6": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:top|F3:blend:F2:side:l8|F2:side:l9": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F2:top|F4:blend:F2:side:l4|F2:side:l5": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F3:blend:F2:side:l5|F2:side:l6": "curved.axis curved.tangent_plane",
|
|
"Stand/F3:blend:F2:side:l8|F2:side:l9": "curved.axis curved.tangent_plane",
|
|
"Stand/F4:blend:F2:side:l4|F2:side:l5": "curved.axis curved.tangent_plane",
|
|
"Stand/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Stand/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F6:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Stand/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F6:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Stand/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Stand/F6:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Stand/body": "body.copy body.mirror body.move body.pattern",
|
|
"Stand/v[F2:bottom & F2:side:l1 & F2:side:l10]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l10 & F2:side:l9]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l1]": "vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l1] (2)": "vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l5]": "vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l5] (2)": "vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l6 & F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l7 & F2:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:bottom & F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:side:l10 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:side:l10]": "vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:side:l10] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:side:l2]": "vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:side:l2] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:top]": "vertex.point",
|
|
"Stand/v[F2:side:l1 & F2:top] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l1 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l1 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l1 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l1 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l10 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l10 & F2:side:l9]": "vertex.point",
|
|
"Stand/v[F2:side:l10 & F2:side:l9] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"Stand/v[F2:side:l2 & F2:side:l3] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"Stand/v[F2:side:l3 & F2:side:l4] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l4 & F2:top & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.point",
|
|
"Stand/v[F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F2:top & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l5 & F2:top & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l5 & F2:top]": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F2:top] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l5 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l5 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l5 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l5 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l6 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l6 & F2:side:l7]": "vertex.point",
|
|
"Stand/v[F2:side:l6 & F2:side:l7] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l6 & F2:top & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.point",
|
|
"Stand/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l7 & F2:side:l8]": "vertex.point",
|
|
"Stand/v[F2:side:l7 & F2:side:l8] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l8 & F2:top & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.point",
|
|
"Stand/v[F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9] (2)": "vertex.point",
|
|
"Stand/v[F2:side:l9 & F2:top & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
|
|
"Stand/v[F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.point",
|
|
"Stand/v[F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/59-enclosure-base": {
|
|
"Enclosure/F11:bottom#[F11:side:c1]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F11:bottom#[F11:side:c1]|F11:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c1]|F11:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c2]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F11:bottom#[F11:side:c2]|F11:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c2]|F11:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c3]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F11:bottom#[F11:side:c3]|F11:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c3]|F11:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c4]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F11:bottom#[F11:side:c4]|F11:side:c4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:bottom#[F11:side:c4]|F11:side:c4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c1#1|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c1#2|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c2#1|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c2#2|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c3#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c3#1|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c3#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c3#2|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c4#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c4#1|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F11:side:c4#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F11:side:c4#2|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F8:side:r2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F8:side:r2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F8:side:r4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F8:side:r4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l1|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F8:side:r2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F8:side:r2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F8:side:r4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F8:side:r4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l3|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F8:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F8:side:r4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c1#1|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c1#2|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c2#1|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c2#2|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c3#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c3#1|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c3#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c3#2|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c4#1": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c4#1|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:side:c4#2": "curved.axis curved.tangent_plane",
|
|
"Enclosure/F7:side:c4#2|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F7:top#[F7:side:c1]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F7:top#[F7:side:c2]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F7:top#[F7:side:c3]": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F7:top#[F7:side:c4]": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F8:side:r2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F8:side:r2|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F8:side:r4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/F8:side:r4|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Enclosure/F8:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Enclosure/body": "body.copy body.mirror body.move body.pattern",
|
|
"Enclosure/v[F11:bottom#[F11:side:c1] & F11:side:c1#1 & F11:side:c1#2]": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c1] & F11:side:c1#1 & F11:side:c1#2] (2)": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c2] & F11:side:c2#1 & F11:side:c2#2]": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c2] & F11:side:c2#1 & F11:side:c2#2] (2)": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c3] & F11:side:c3#1 & F11:side:c3#2]": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c3] & F11:side:c3#1 & F11:side:c3#2] (2)": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c4] & F11:side:c4#1 & F11:side:c4#2]": "vertex.point",
|
|
"Enclosure/v[F11:bottom#[F11:side:c4] & F11:side:c4#1 & F11:side:c4#2] (2)": "vertex.point",
|
|
"Enclosure/v[F11:side:c1#1 & F11:side:c1#2 & F7:top#[F7:side:c1]]": "vertex.point",
|
|
"Enclosure/v[F11:side:c1#1 & F11:side:c1#2 & F7:top#[F7:side:c1]] (2)": "vertex.point",
|
|
"Enclosure/v[F11:side:c2#1 & F11:side:c2#2 & F7:top#[F7:side:c2]]": "vertex.point",
|
|
"Enclosure/v[F11:side:c2#1 & F11:side:c2#2 & F7:top#[F7:side:c2]] (2)": "vertex.point",
|
|
"Enclosure/v[F11:side:c3#1 & F11:side:c3#2 & F7:top#[F7:side:c3]]": "vertex.point",
|
|
"Enclosure/v[F11:side:c3#1 & F11:side:c3#2 & F7:top#[F7:side:c3]] (2)": "vertex.point",
|
|
"Enclosure/v[F11:side:c4#1 & F11:side:c4#2 & F7:top#[F7:side:c4]]": "vertex.point",
|
|
"Enclosure/v[F11:side:c4#1 & F11:side:c4#2 & F7:top#[F7:side:c4]] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l1]": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l1] (2)": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F8:side:r2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F8:side:r4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r2 & F8:top]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r2]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r4 & F8:top]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r4]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F8:side:r2]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F8:side:r4]": "vertex.plane_three_points vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
|
|
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/60-pipe-flange": {
|
|
"Flange/F2:side:l1": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Flange/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l2#3|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Flange/F2:side:l3|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#1": "edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#2": "edge.normal_plane edge.project",
|
|
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#3": "edge.normal_plane edge.project",
|
|
"Flange/F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l4#1|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l4#1|F7:blend:F2:side:l3|F2:side:l4#1": "edge.normal_plane edge.project",
|
|
"Flange/F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l4#2|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l4#2|F7:blend:F2:side:l3|F2:side:l4#2": "edge.normal_plane edge.project",
|
|
"Flange/F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l4#3|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l4#3|F7:blend:F2:side:l3|F2:side:l4#3": "edge.normal_plane edge.project",
|
|
"Flange/F2:side:l5": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#1": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l6#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l6#1|F6:blend:F2:side:l5|F2:side:l6#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l6#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l6#2|F6:blend:F2:side:l5|F2:side:l6#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F2:side:l6#3": "curved.axis curved.tangent_plane",
|
|
"Flange/F2:side:l6#3|F6:blend:F2:side:l5|F2:side:l6#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Flange/F4:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F6:blend:F2:side:l5|F2:side:l6#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F6:blend:F2:side:l5|F2:side:l6#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F6:blend:F2:side:l5|F2:side:l6#3": "curved.axis curved.tangent_plane",
|
|
"Flange/F7:blend:F2:side:l3|F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Flange/F7:blend:F2:side:l3|F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Flange/F7:blend:F2:side:l3|F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Flange/body": "body.copy body.mirror body.move body.pattern",
|
|
"Flange/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l1 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l1 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l1 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
|
|
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l4#1 & F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l4#1 & F2:side:l4#3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l4#2 & F2:side:l4#3 & F7:blend:F2:side:l3|F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#2]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l6#1 & F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#2]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l6#1 & F2:side:l6#3 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Flange/v[F2:side:l6#2 & F2:side:l6#3 & F6:blend:F2:side:l5|F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/61-shaft-keyway": {
|
|
"Shaft/F2:side:l1": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#1": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l2#1|F3:blend:F2:side:l1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l2#2|F3:blend:F2:side:l1|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l2#3|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l2#3|F3:blend:F2:side:l1|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l3": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/F2:side:l3|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l3|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l4#1|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#1|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#1|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#1|F6:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l4#2|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l4#3|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#3|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#3|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l4#3|F6:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l5": "!face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/F2:side:l5|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l5|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l5|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l6#1": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l6#1|F3:blend:F2:side:l6#1|F2:side:l7": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l6#2": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l6#2|F3:blend:F2:side:l6#2|F2:side:l7": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l6#3": "curved.axis curved.tangent_plane",
|
|
"Shaft/F2:side:l6#3|F3:blend:F2:side:l6#3|F2:side:l7": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l7": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/F2:side:l7|F3:blend:F2:side:l6#1|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l7|F3:blend:F2:side:l6#2|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F2:side:l7|F3:blend:F2:side:l6#3|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Shaft/F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Shaft/F3:blend:F2:side:l1|F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Shaft/F3:blend:F2:side:l6#1|F2:side:l7": "curved.axis curved.tangent_plane",
|
|
"Shaft/F3:blend:F2:side:l6#2|F2:side:l7": "curved.axis curved.tangent_plane",
|
|
"Shaft/F3:blend:F2:side:l6#3|F2:side:l7": "curved.axis curved.tangent_plane",
|
|
"Shaft/F6:bottom": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/F6:bottom|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F6:bottom|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F6:bottom|F6:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F6:bottom|F6:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Shaft/F6:side:a1": "curved.axis curved.tangent_plane",
|
|
"Shaft/F6:side:a1|F6:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Shaft/F6:side:a1|F6:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Shaft/F6:side:a2": "curved.axis curved.tangent_plane",
|
|
"Shaft/F6:side:a2|F6:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Shaft/F6:side:a2|F6:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Shaft/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/F6:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Shaft/body": "body.copy body.mirror body.move body.pattern",
|
|
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l2#1 & F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l2#1 & F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l2#2 & F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l3 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F6:side:a1]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F6:side:a2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#1 & F6:side:a1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#1 & F6:side:a2 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#3 & F6:side:a1 & F6:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l4#3 & F6:side:a2 & F6:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l5 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l5 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l5 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l6#1 & F2:side:l6#2 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l6#1 & F2:side:l6#3 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l6#2 & F2:side:l6#3 & F3:blend:F2:side:l6#2|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F6:bottom & F6:side:a1 & F6:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F6:bottom & F6:side:a1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F6:bottom & F6:side:a2 & F6:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Shaft/v[F6:bottom & F6:side:a2 & F6:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/62-heat-sink": {
|
|
"HeatSink/F2:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"HeatSink/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l2|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"HeatSink/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:side:l4|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F2:top#[F2:side:l4,F5:side:l4]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F2:top#[F2:side:l4,F5:side:l4]|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:l2": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:l2|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:l4": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:side:l4|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"HeatSink/F5:top": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"HeatSink/body": "body.copy body.mirror body.move body.pattern",
|
|
"HeatSink/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:side:l2 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:side:l4 & F2:top#[F2:side:l4,F5:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l4,F5:side:l4] & F5:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:l2 & F5:top]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:l4 & F5:top]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l2 & F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:side:l4 & F2:top#[F2:side:l4,F5:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l4,F5:side:l4] & F5:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:l2 & F5:top]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:l4 & F5:top]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/63-hinge-knuckle": {
|
|
"Hinge/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Hinge/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l1|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Hinge/F2:side:l2|F2:side:l3#[F2:side:l2,F8:side:l2]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F2:top~1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F2:top~2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F4:side:c1#[F2:side:l2,F8:side:l2]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F6:side:c1#1#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l2|F6:side:c1#2#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Hinge/F2:side:l4|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F2:top~1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F2:top~2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F4:side:c1#[F2:side:l4,F8:side:l4]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F6:side:c1#1#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:side:l4|F6:side:c1#2#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Hinge/F2:start|F8:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:start|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:start|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Hinge/F2:top|F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:top|F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:top|F8:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:top|F8:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F2:top|F8:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F4:side:c1#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F4:side:c1#[F2:side:l2,F8:side:l2]|F8:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]|F8:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]|F8:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F4:side:c1#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F4:side:c1#[F2:side:l4,F8:side:l4]|F8:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]|F8:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]|F8:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F6:side:c1#1#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F6:side:c1#1#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F6:side:c1#1#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F6:side:c1#1#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F6:side:c1#2#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F6:side:c1#2#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F6:side:c1#2#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
|
|
"Hinge/F6:side:c1#2#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F8:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Hinge/F8:side:l1|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F8:side:l1|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Hinge/F8:side:l2": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Hinge/F8:side:l4": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Hinge/body": "body.copy body.mirror body.move body.pattern",
|
|
"Hinge/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:start]": "vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:start] (2)": "vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:top]": "vertex.point",
|
|
"Hinge/v[F2:side:l1 & F2:top] (2)": "vertex.point",
|
|
"Hinge/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F8:side:l2] & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l2 & F2:start]": "vertex.point",
|
|
"Hinge/v[F2:side:l2 & F2:top & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l2 & F2:top]": "vertex.point",
|
|
"Hinge/v[F2:side:l2 & F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l2 & F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l2 & F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2]]": "vertex.point",
|
|
"Hinge/v[F2:side:l2 & F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2]] (2)": "vertex.point",
|
|
"Hinge/v[F2:side:l3#[F2:side:l2,F8:side:l2] & F2:start & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l3#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:side:l4 & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:start & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l4 & F2:start]": "vertex.point",
|
|
"Hinge/v[F2:side:l4 & F2:top & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l4 & F2:top]": "vertex.point",
|
|
"Hinge/v[F2:side:l4 & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l4 & F4:side:c1#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:side:l4 & F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4]]": "vertex.point",
|
|
"Hinge/v[F2:side:l4 & F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4]] (2)": "vertex.point",
|
|
"Hinge/v[F2:start & F8:side:l1 & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:start & F8:side:l1 & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:top & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:top & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:top & F8:side:l1 & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F2:top & F8:side:l1 & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F4:side:c1#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Hinge/v[F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.point",
|
|
"Hinge/v[F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2] & F8:side:l2] (2)": "vertex.point",
|
|
"Hinge/v[F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.point",
|
|
"Hinge/v[F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4] & F8:side:l4] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/64-sketch-tangent-arc-chain": {
|
|
"Wave/F2:side:a1": "curved.axis curved.tangent_plane",
|
|
"Wave/F2:side:a1|F2:side:a2": "edge.axis edge.normal_plane edge.project",
|
|
"Wave/F2:side:a1|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Wave/F2:side:a1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:a1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Wave/F2:side:a2": "curved.axis curved.tangent_plane",
|
|
"Wave/F2:side:a2|F2:side:a3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Wave/F2:side:a2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:a2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:a3": "curved.axis curved.tangent_plane",
|
|
"Wave/F2:side:a3|F2:side:a4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Wave/F2:side:a3|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:a3|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Wave/F2:side:a4": "curved.axis curved.tangent_plane",
|
|
"Wave/F2:side:a4|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Wave/F2:side:a4|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:a4|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Wave/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Wave/F2:side:l1|F2:start": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:l1|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:l2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
|
|
"Wave/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Wave/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
|
|
"Wave/F2:side:l3|F2:start": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Wave/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit !edge.fillet edge.normal_plane edge.project",
|
|
"Wave/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
|
|
"Wave/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
|
|
"Wave/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Wave/v[F2:side:a1 & F2:side:a2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a1 & F2:side:a2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a2 & F2:side:a3 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Wave/v[F2:side:a2 & F2:side:a3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a3 & F2:side:a4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a3 & F2:side:a4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a4 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:a4 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Wave/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Wave/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/65-sketch-gear-tooth": {
|
|
"Tooth/F2:side:f1": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Tooth/F2:side:f1|F2:side:r1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f1|F2:side:t1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f2": "curved.axis curved.tangent_plane",
|
|
"Tooth/F2:side:f2|F2:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f2|F2:side:t1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:f2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:r1": "curved.axis curved.tangent_plane",
|
|
"Tooth/F2:side:r1|F2:side:s1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:r1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:r1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Tooth/F2:side:r2": "curved.axis curved.tangent_plane",
|
|
"Tooth/F2:side:r2|F2:side:s2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:r2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Tooth/F2:side:r2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:s1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Tooth/F2:side:s1|F2:side:s2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Tooth/F2:side:s1|F2:start": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:s1|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:s2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Tooth/F2:side:s2|F2:start": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:s2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit !edge.fillet edge.normal_plane edge.project",
|
|
"Tooth/F2:side:t1": "curved.axis curved.tangent_plane",
|
|
"Tooth/F2:side:t1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Tooth/F2:side:t1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Tooth/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Tooth/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Tooth/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tooth/v[F2:side:f1 & F2:side:r1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Tooth/v[F2:side:f1 & F2:side:r1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Tooth/v[F2:side:f1 & F2:side:t1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Tooth/v[F2:side:f1 & F2:side:t1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tooth/v[F2:side:f2 & F2:side:r2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Tooth/v[F2:side:f2 & F2:side:r2 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Tooth/v[F2:side:f2 & F2:side:t1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Tooth/v[F2:side:f2 & F2:side:t1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tooth/v[F2:side:r1 & F2:side:s1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Tooth/v[F2:side:r1 & F2:side:s1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tooth/v[F2:side:r2 & F2:side:s2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Tooth/v[F2:side:r2 & F2:side:s2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Tooth/v[F2:side:s1 & F2:side:s2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Tooth/v[F2:side:s1 & F2:side:s2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/66-sketch-linkage": {
|
|
"Link/F2:side:a1": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
|
|
"Link/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Link/F2:side:a1|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Link/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Link/F2:side:a2": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Link/F2:side:a2|F2:side:l1": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Link/F2:side:a2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Link/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Link/F2:side:a2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Link/F2:side:h1#1": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h1#1|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h1#2": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h1#2|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h2#1": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Link/F2:side:h2#2": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Link/F2:side:h3#1": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h3#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h3#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h3#2": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h3#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h3#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h4#1": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h4#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h4#1|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h4#2": "curved.axis curved.tangent_plane",
|
|
"Link/F2:side:h4#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:h4#2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Link/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Link/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Link/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Link/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Link/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Link/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Link/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Link/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Link/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Link/v[F2:side:a1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Link/v[F2:side:a1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Link/v[F2:side:a2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Link/v[F2:side:a2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Link/v[F2:side:a2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Link/v[F2:side:a2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:start]": "vertex.point",
|
|
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:start] (2)": "vertex.point",
|
|
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:top]": "vertex.point",
|
|
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:top] (2)": "vertex.point",
|
|
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:start]": "vertex.point",
|
|
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:start] (2)": "vertex.point",
|
|
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:top]": "vertex.point",
|
|
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:top] (2)": "vertex.point",
|
|
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:start]": "vertex.point vertex.point+edit",
|
|
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:start] (2)": "vertex.point",
|
|
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:top]": "vertex.point",
|
|
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:top] (2)": "vertex.point",
|
|
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:start]": "vertex.point",
|
|
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:start] (2)": "vertex.point",
|
|
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:top]": "vertex.point",
|
|
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/67-sm-base-flange": {
|
|
"Body1/F2:face:0": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:2": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:2|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:2|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5": "face.angle_plane face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/68-sm-edge-flange": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/69-sm-tray": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:face:0|F3:face:30": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:34": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:38": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:42": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:face:1|F3:face:31": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:35": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:39": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:43": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:14": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:15": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:35": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:11|F3:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:13|F3:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:14|F3:face:37": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:14|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:15|F3:face:36": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:15|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:16|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:16|F3:face:38": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:17": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:17|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:17|F3:face:39": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:18": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:18|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:18|F3:face:22": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:19": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:19|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:2": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:20": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:20|F3:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:21": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:21|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:22": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:22|F3:face:40": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:23": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:23|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:23|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:23|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:23|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:23|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:23|F3:face:42": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:24": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:24|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:24|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:24|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:24|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:24|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:24|F3:face:43": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:25": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:25|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:25|F3:face:29": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:26": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:26|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:27": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:27|F3:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:28": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:28|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:29": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:29|F3:face:44": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:2|F3:face:30": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:2|F3:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:2|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:2|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:2|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:2|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:30": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:30|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:30|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:31": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:31|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:31|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:32": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:32|F3:face:37": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:32|F3:face:8": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:33": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:33|F3:face:44": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:33|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:34": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:34|F3:face:36": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:34|F3:face:37": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:34|F3:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:35": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:35|F3:face:36": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:35|F3:face:37": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:36": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:36|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:37": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:38": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:38|F3:face:40": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:38|F3:face:41": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:39": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:39|F3:face:40": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:39|F3:face:41": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:3|F3:face:31": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:3|F3:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:3|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:3|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:3|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:3|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:40": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:40|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:41": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:42": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:42|F3:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:42|F3:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:43": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:43|F3:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:43|F3:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:44": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:45": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:4|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F3:face:30 & F3:face:32 & F3:face:34 & F3:face:37]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F3:face:30 & F3:face:33 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F3:face:34 & F3:face:36 & F3:face:38 & F3:face:41]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F3:face:38 & F3:face:40 & F3:face:42 & F3:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F3:face:31 & F3:face:32 & F3:face:35 & F3:face:37]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F3:face:31 & F3:face:33 & F3:face:43 & F3:face:44]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F3:face:35 & F3:face:36 & F3:face:39 & F3:face:41]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F3:face:39 & F3:face:40 & F3:face:43 & F3:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:11 & F3:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:12 & F3:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:13 & F3:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:14 & F3:face:35 & F3:face:37]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:15 & F3:face:35 & F3:face:36]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:11 & F3:face:12 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:11 & F3:face:15 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:12 & F3:face:13 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:13 & F3:face:14 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:14 & F3:face:34 & F3:face:37 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:15 & F3:face:34 & F3:face:36 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:18 & F3:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:20 & F3:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:21 & F3:face:38 & F3:face:41]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:16 & F3:face:22 & F3:face:38 & F3:face:40]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:18 & F3:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:20 & F3:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:21 & F3:face:39 & F3:face:41]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:17 & F3:face:22 & F3:face:39 & F3:face:40]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:2 & F3:face:30 & F3:face:32 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:2 & F3:face:30 & F3:face:33 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:2 & F3:face:4 & F3:face:5]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:2 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:2 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:2 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:23 & F3:face:25 & F3:face:26]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:23 & F3:face:25 & F3:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:23 & F3:face:26 & F3:face:27]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:23 & F3:face:27 & F3:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:23 & F3:face:28 & F3:face:42 & F3:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:23 & F3:face:29 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:24 & F3:face:25 & F3:face:26]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:24 & F3:face:25 & F3:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:24 & F3:face:26 & F3:face:27]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:24 & F3:face:27 & F3:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:24 & F3:face:28 & F3:face:43 & F3:face:45]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:24 & F3:face:29 & F3:face:43 & F3:face:44]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:3 & F3:face:31 & F3:face:32 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:3 & F3:face:31 & F3:face:33 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:3 & F3:face:4 & F3:face:5]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:3 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:3 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:3 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/70-sm-flange-45": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/71-sm-custom-rule": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F3:face:16]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F3:face:20]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:14": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:18": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F3:face:16]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F3:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:15": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:16]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:16]|F2:face:3#[F3:face:13,F3:face:18,F3:face:19]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:16]|F3:face:16": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]|F3:face:13": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]|F3:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]|F3:face:19": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:20]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:20]|F2:face:5#[F3:face:14,F3:face:15,F3:face:8]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:20]|F3:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:15": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:11|F3:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:13|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:14": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:14|F3:face:16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:14|F3:face:4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:15": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:15|F3:face:16": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:15|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:16": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:16|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:18": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:18|F3:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:18|F3:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:19": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:19|F3:face:20": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:20": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:4|F3:face:6": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:4|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:4|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F3:face:14 & F3:face:16]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F3:face:18 & F3:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F3:face:15 & F3:face:16]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:10 & F3:face:13 & F3:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:13 & F3:face:18 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:14 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:15 & F3:face:5 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:11 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:12 & F3:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:11 & F3:face:12 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:11 & F3:face:18 & F3:face:20 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:12 & F3:face:13 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:14 & F3:face:16 & F3:face:4 & F3:face:6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:15 & F3:face:16 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:4 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:4 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/72-sm-contour-flange": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:14": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:10|F2:face:11": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:10|F2:face:13": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:14|F2:face:16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:14|F2:face:17": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:14|F2:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:15": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:15|F2:face:16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:15|F2:face:17": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:15|F2:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:16": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:16|F2:face:2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:16|F2:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:17": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:17|F2:face:3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:17|F2:face:8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:18": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:18|F2:face:20": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:18|F2:face:21": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:18|F2:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:18|F2:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:19": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:face:19|F2:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:19|F2:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:19|F2:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:15": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:20": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:21": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:5|F2:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5|F2:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:6|F2:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:6|F2:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:14 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:15 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:15 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:11 & F2:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:11 & F2:face:19 & F2:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:12 & F2:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:10 & F2:face:13 & F2:face:19 & F2:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:11 & F2:face:12 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:11 & F2:face:18 & F2:face:20 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:12 & F2:face:13 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:13 & F2:face:18 & F2:face:21 & F2:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:14 & F2:face:16 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:14 & F2:face:17 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:15 & F2:face:16 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:15 & F2:face:17 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:18 & F2:face:20 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:18 & F2:face:21 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:19 & F2:face:20 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:19 & F2:face:21 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/73-sm-hem": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F4:face:18": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F4:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:7|F4:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:9|F4:face:21": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F4:face:10|F4:face:11": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:11|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:12|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:13|F4:face:21": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:13|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:18|F4:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18|F4:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:19": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:19|F4:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:19|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:20": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:21": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F4:face:18 & F4:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:9 & F4:face:18 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F4:face:19 & F4:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:9 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:11 & F4:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:11 & F4:face:19 & F4:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:13 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:11 & F4:face:12 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:11 & F4:face:18 & F4:face:20 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:12 & F4:face:13 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:13 & F4:face:18 & F4:face:21 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/74-sm-unfold-refold": {
|
|
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F2:face:3#[F7:face:16,F7:face:24,F7:face:25]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F4:face:0": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F4:face:13": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F7:face:22": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F7:face:16,F7:face:24,F7:face:25]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F7:face:16,F7:face:24,F7:face:25]|F7:face:16": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F7:face:16,F7:face:24,F7:face:25]|F7:face:24": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F7:face:16,F7:face:24,F7:face:25]|F7:face:25": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F4:face:0,F4:face:13]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F2:face:5#[F7:face:11,F7:face:20,F7:face:21]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F2:face:5#[F7:face:14,F7:face:28,F7:face:29]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F4:face:0": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F4:face:13": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F7:face:11,F7:face:20,F7:face:21]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F7:face:11,F7:face:20,F7:face:21]|F7:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F7:face:11,F7:face:20,F7:face:21]|F7:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F7:face:11,F7:face:20,F7:face:21]|F7:face:21": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F7:face:14,F7:face:28,F7:face:29]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F7:face:14,F7:face:28,F7:face:29]|F7:face:14": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F7:face:14,F7:face:28,F7:face:29]|F7:face:28": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F7:face:14,F7:face:28,F7:face:29]|F7:face:29": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F4:face:0|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:0|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:0|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:0|F7:face:21": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:0|F7:face:25": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:0|F7:face:29": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F4:face:13|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:13|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:13|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:13|F7:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:13|F7:face:24": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:13|F7:face:28": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l2#[F7:face:17,F7:face:24,F7:face:25]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l2#[F7:face:17,F7:face:24,F7:face:25]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:side:l2#[F7:face:17,F7:face:24,F7:face:25]|F7:face:17": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F6:side:l2#[F7:face:17,F7:face:24,F7:face:25]|F7:face:24": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l2#[F7:face:17,F7:face:24,F7:face:25]|F7:face:25": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:side:l3|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l4#[F7:face:19,F7:face:28,F7:face:29]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F6:side:l4#[F7:face:19,F7:face:28,F7:face:29]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:side:l4#[F7:face:19,F7:face:28,F7:face:29]|F7:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F6:side:l4#[F7:face:19,F7:face:28,F7:face:29]|F7:face:28": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l4#[F7:face:19,F7:face:28,F7:face:29]|F7:face:29": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:10|F7:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:10|F7:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:10|F7:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:10|F7:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:11|F7:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:11|F7:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F7:face:12|F7:face:14": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:16": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:17": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:19": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:24": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:12|F7:face:28": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F7:face:13|F7:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:16": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:17": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:19": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:25": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:13|F7:face:29": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:14|F7:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:15|F7:face:16": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:16": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:17": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:17|F7:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:18": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:18|F7:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:19": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:20": "curved.axis curved.tangent_plane",
|
|
"Body1/F7:face:20|F7:face:22": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:20|F7:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:21": "curved.axis curved.tangent_plane",
|
|
"Body1/F7:face:21|F7:face:22": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:21|F7:face:8": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:22": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F7:face:22|F7:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F7:face:24": "curved.axis curved.tangent_plane",
|
|
"Body1/F7:face:25": "curved.axis curved.tangent_plane",
|
|
"Body1/F7:face:28": "curved.axis curved.tangent_plane",
|
|
"Body1/F7:face:29": "curved.axis curved.tangent_plane",
|
|
"Body1/F7:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F7:face:7|F7:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F7:face:8|F7:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F7:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F2:face:3#[F7:face:16,F7:face:24,F7:face:25] & F4:face:0 & F7:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F2:face:3#[F7:face:16,F7:face:24,F7:face:25] & F4:face:13 & F7:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:0 & F7:face:21 & F7:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:13 & F7:face:20 & F7:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F7:face:16,F7:face:24,F7:face:25] & F7:face:12 & F7:face:16 & F7:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F7:face:16,F7:face:24,F7:face:25] & F7:face:13 & F7:face:16 & F7:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F4:face:0,F4:face:13] & F2:face:5#[F7:face:11,F7:face:20,F7:face:21] & F4:face:0 & F7:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F4:face:0,F4:face:13] & F2:face:5#[F7:face:11,F7:face:20,F7:face:21] & F4:face:13 & F7:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F4:face:0,F4:face:13] & F2:face:5#[F7:face:14,F7:face:28,F7:face:29] & F4:face:0 & F7:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F4:face:0,F4:face:13] & F2:face:5#[F7:face:14,F7:face:28,F7:face:29] & F4:face:13 & F7:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F7:face:11,F7:face:20,F7:face:21] & F7:face:11 & F7:face:20 & F7:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F7:face:11,F7:face:20,F7:face:21] & F7:face:11 & F7:face:21 & F7:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F7:face:14,F7:face:28,F7:face:29] & F7:face:12 & F7:face:14 & F7:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F7:face:14,F7:face:28,F7:face:29] & F7:face:13 & F7:face:14 & F7:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:0 & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l2#[F7:face:17,F7:face:24,F7:face:25] & F7:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:0 & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:0 & F6:side:l3 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:0 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l4#[F7:face:19,F7:face:28,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:13 & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l2#[F7:face:17,F7:face:24,F7:face:25] & F7:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:13 & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:13 & F6:side:l3 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:13 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l4#[F7:face:19,F7:face:28,F7:face:29] & F7:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l2#[F7:face:17,F7:face:24,F7:face:25] & F7:face:12 & F7:face:17 & F7:face:24]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l2#[F7:face:17,F7:face:24,F7:face:25] & F7:face:13 & F7:face:17 & F7:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l4#[F7:face:19,F7:face:28,F7:face:29] & F7:face:12 & F7:face:19 & F7:face:28]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l4#[F7:face:19,F7:face:28,F7:face:29] & F7:face:13 & F7:face:19 & F7:face:29]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:10 & F7:face:11 & F7:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:10 & F7:face:11 & F7:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:10 & F7:face:7 & F7:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:10 & F7:face:8 & F7:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:12 & F7:face:14 & F7:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:12 & F7:face:15 & F7:face:16]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:12 & F7:face:17 & F7:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:12 & F7:face:18 & F7:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:13 & F7:face:14 & F7:face:15]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:13 & F7:face:15 & F7:face:16]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:13 & F7:face:17 & F7:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:13 & F7:face:18 & F7:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:20 & F7:face:22 & F7:face:7 & F7:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F7:face:21 & F7:face:22 & F7:face:8 & F7:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/75-sm-bracket-holes": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F4:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F6:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F6:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F4:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F6:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F6:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]|F2:face:4#[F4:face:14,F4:face:19,F4:face:20]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:14": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:19": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:20": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:face:9|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F4:face:10|F4:face:12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10|F4:face:14": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:11|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:11|F4:face:14": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:12|F4:face:21": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F4:face:13|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F4:face:18": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F4:face:18|F4:face:21": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:19": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:19|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:20": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:20|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:21": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F4:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F3:face:10 & F4:face:18 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:face:0 & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:0 & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
|
|
"Body1/v[F2:face:0 & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F3:face:11 & F4:face:18 & F4:face:20 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:face:1 & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:1 & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
|
|
"Body1/v[F2:face:1 & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:10 & F4:face:14 & F4:face:19]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:11 & F4:face:14 & F4:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:10 & F3:face:5 & F4:face:18 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:11 & F3:face:6 & F4:face:18 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:9 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:9 & F4:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:12 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:11 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:11 & F4:face:12 & F4:face:20 & F4:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:face:11 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"oracle/76-sm-thickness-variant": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"regressions/join_struts_on_bore_wall": {
|
|
"Frame/F1:+x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F3:+z#[F4:+y,F5:face:11]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F3:+z#[F4:-y,F5:face:9]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F3:-z#[F4:+y,F5:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F3:-z#[F4:-y,F5:face:3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F4:+y#[F3:+z,F5:face:12]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F4:+y#[F3:-z,F5:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F4:-y#[F3:+z,F5:face:9]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F4:-y#[F3:-z,F5:face:0]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F5:face:0": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F5:face:11": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F5:face:12": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F5:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F5:face:4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+x|F5:face:9": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Frame/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Frame/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F2:side#[F5:face:18,F5:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F2:side#[F5:face:23,F5:face:25]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-x|F5:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Frame/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Frame/F2:side#[F5:face:18,F5:face:20]": "curved.axis curved.tangent_plane",
|
|
"Frame/F2:side#[F5:face:18,F5:face:20]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F2:side#[F5:face:23,F5:face:25]": "curved.axis curved.tangent_plane",
|
|
"Frame/F2:side#[F5:face:23,F5:face:25]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:+z#[F4:+y,F5:face:11]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F3:+z#[F4:+y,F5:face:11]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:+z#[F4:+y,F5:face:11]|F4:+y#[F3:+z,F5:face:12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:+z#[F4:+y,F5:face:11]|F5:face:11": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:+z#[F4:-y,F5:face:9]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F3:+z#[F4:-y,F5:face:9]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:+z#[F4:-y,F5:face:9]|F4:-y#[F3:+z,F5:face:9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:+z#[F4:-y,F5:face:9]|F5:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Frame/F3:-x|F3:-z#[F4:+y,F5:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F3:-z#[F4:-y,F5:face:3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F4:+y#[F3:+z,F5:face:12]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F4:+y#[F3:-z,F5:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F4:-y#[F3:+z,F5:face:9]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F4:-y#[F3:-z,F5:face:0]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F5:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-x|F5:face:26": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-z#[F4:+y,F5:face:4]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F3:-z#[F4:+y,F5:face:4]|F4:+y#[F3:-z,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-z#[F4:+y,F5:face:4]|F5:face:4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-z#[F4:-y,F5:face:3]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F3:-z#[F4:-y,F5:face:3]|F4:-y#[F3:-z,F5:face:0]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F3:-z#[F4:-y,F5:face:3]|F5:face:3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F4:+y#[F3:+z,F5:face:12]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F4:+y#[F3:+z,F5:face:12]|F5:face:12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F4:+y#[F3:-z,F5:face:4]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F4:+y#[F3:-z,F5:face:4]|F5:face:4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F4:-y#[F3:+z,F5:face:9]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F4:-y#[F3:+z,F5:face:9]|F5:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F4:-y#[F3:-z,F5:face:0]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Frame/F4:-y#[F3:-z,F5:face:0]|F5:face:0": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Frame/F5:face:0": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:11": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:12": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:18": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:20": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:21": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:22": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:23": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:25": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:26": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:27": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:3": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:4": "curved.axis curved.tangent_plane",
|
|
"Frame/F5:face:9": "curved.axis curved.tangent_plane",
|
|
"Frame/body": "body.copy body.mirror body.move body.pattern",
|
|
"Frame/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:+z#[F4:+y,F5:face:11] & F4:+y#[F3:+z,F5:face:12]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:+z#[F4:+y,F5:face:11] & F5:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:+z#[F4:-y,F5:face:9] & F4:-y#[F3:+z,F5:face:9]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:+z#[F4:-y,F5:face:9] & F5:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:-z#[F4:+y,F5:face:4] & F4:+y#[F3:-z,F5:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:-z#[F4:+y,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:-z#[F4:-y,F5:face:3] & F4:-y#[F3:-z,F5:face:0]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F3:-z#[F4:-y,F5:face:3] & F5:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F4:+y#[F3:+z,F5:face:12] & F5:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F4:+y#[F3:-z,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F4:-y#[F3:+z,F5:face:9] & F5:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F4:-y#[F3:-z,F5:face:0] & F5:face:0]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F5:face:0 & F5:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+x & F5:face:11 & F5:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F2:side#[F5:face:18,F5:face:20] & F5:face:18]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F2:side#[F5:face:18,F5:face:20] & F5:face:20]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F2:side#[F5:face:23,F5:face:25] & F5:face:23]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F2:side#[F5:face:23,F5:face:25] & F5:face:25]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F5:face:18 & F5:face:27]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F5:face:20 & F5:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F5:face:21 & F5:face:22]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F5:face:22 & F5:face:23]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F5:face:25 & F5:face:26]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F1:-x & F5:face:26 & F5:face:27]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F2:side#[F5:face:18,F5:face:20] & F3:-x & F4:+y#[F3:-z,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F2:side#[F5:face:18,F5:face:20] & F3:-x & F4:-y#[F3:-z,F5:face:0] & F5:face:0]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F2:side#[F5:face:23,F5:face:25] & F3:-x & F4:+y#[F3:+z,F5:face:12] & F5:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F2:side#[F5:face:23,F5:face:25] & F3:-x & F4:-y#[F3:+z,F5:face:9] & F5:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:+z#[F4:+y,F5:face:11] & F3:-x & F4:+y#[F3:+z,F5:face:12]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:+z#[F4:+y,F5:face:11] & F3:-x & F5:face:11 & F5:face:21]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:+z#[F4:-y,F5:face:9] & F3:-x & F4:-y#[F3:+z,F5:face:9]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:+z#[F4:-y,F5:face:9] & F3:-x & F5:face:26 & F5:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:-x & F3:-z#[F4:+y,F5:face:4] & F4:+y#[F3:-z,F5:face:4]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:-x & F3:-z#[F4:+y,F5:face:4] & F5:face:21 & F5:face:4]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:-x & F3:-z#[F4:-y,F5:face:3] & F4:-y#[F3:-z,F5:face:0]]": "vertex.plane_three_points vertex.point",
|
|
"Frame/v[F3:-x & F3:-z#[F4:-y,F5:face:3] & F5:face:26 & F5:face:3]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"regressions/loft_cut_beside_round_hole": {
|
|
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F9:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F9:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F9:side:l3#[F9:side:l1]#1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:bottom|F9:side:l3#[F9:side:l1]#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:bottom": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F6:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F9:end": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:end|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F9:end|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F9:end|F9:side:l3#[F9:side:l1]#1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F9:end|F9:side:l3#[F9:side:l1]#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F9:side:l1": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l1|F9:side:l3#[F9:side:l1]#1": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F9:side:l1|F9:side:l3#[F9:side:l1]#2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F9:side:l3": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l3#[F9:side:l1]#1": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F9:side:l3#[F9:side:l1]#2": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F9:side:l3|F9:side:l3#[F9:side:l1]#1": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F9:side:l3|F9:side:l3#[F9:side:l1]#2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Body1/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F9:side:l1 & F9:side:l3#[F9:side:l1]#1]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F9:side:l1 & F9:side:l3#[F9:side:l1]#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F9:side:l3 & F9:side:l3#[F9:side:l1]#1]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:bottom & F9:side:l3 & F9:side:l3#[F9:side:l1]#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:bottom & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Body1/v[F6:bottom & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Body1/v[F9:end & F9:side:l1 & F9:side:l3#[F9:side:l1]#1]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:end & F9:side:l1 & F9:side:l3#[F9:side:l1]#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:end & F9:side:l3 & F9:side:l3#[F9:side:l1]#1]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F9:end & F9:side:l3 & F9:side:l3#[F9:side:l1]#2]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"regressions/oblique_cut_of_cylinder": {
|
|
"ClipBody/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
|
|
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1": "curved.axis curved.tangent_plane",
|
|
"Tool/F2:side:a1|F2:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1|F4:side:l1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l3|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Tool/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:bottom & F2:side:l3 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l3 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"regressions/oblique_cut_of_cylinder_hang": {
|
|
"ClipBody/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
|
|
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"ClipBody/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1": "curved.axis curved.tangent_plane",
|
|
"Tool/F2:side:a1|F2:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:a1|F4:side:l1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l3|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Tool/body": "body.copy body.mirror body.move body.pattern",
|
|
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:bottom & F2:side:l3 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:a1 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Tool/v[F2:side:l3 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"regressions/shallow_loft_cut_from_top_face": {
|
|
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:top": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top|F5:side:l1#[F5:side:l3]#1~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1#[F5:side:l3]#1~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1#[F5:side:l3]#2~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1#[F5:side:l3]#2~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1#[F5:side:l3]#2~3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:end": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:end|F5:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:end|F5:side:l1#[F5:side:l3]#1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F5:end|F5:side:l1#[F5:side:l3]#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F5:end|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:side:l1": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:side:l1#[F5:side:l3]#1": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:side:l1#[F5:side:l3]#1|F5:side:l3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:side:l1#[F5:side:l3]#2": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:side:l1#[F5:side:l3]#2|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:side:l1|F5:side:l1#[F5:side:l3]#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:side:l1|F5:side:l1#[F5:side:l3]#2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:side:l3": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3]": "vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:top]": "vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4]": "vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4] (2)": "vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top]": "vertex.point",
|
|
"Body1/v[F2:side:l4 & F2:top]": "vertex.point",
|
|
"Body1/v[F2:side:l4 & F2:top] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1 & F5:side:l1#[F5:side:l3]#1]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1 & F5:side:l1#[F5:side:l3]#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1#[F5:side:l3]#1 & F5:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1#[F5:side:l3]#1]": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1#[F5:side:l3]#2 & F5:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1#[F5:side:l3]#2]": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1#[F5:side:l3]#2] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1]": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:l1] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F5:side:l3]": "vertex.point",
|
|
"Body1/v[F5:end & F5:side:l1 & F5:side:l1#[F5:side:l3]#1]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:end & F5:side:l1 & F5:side:l1#[F5:side:l3]#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:end & F5:side:l1#[F5:side:l3]#1 & F5:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F5:end & F5:side:l1#[F5:side:l3]#2 & F5:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"typical/filleted-shelled-box": {
|
|
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:inner:F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:inner:F2:side:l2|F4:inner:F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:inner:F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F4:inner:F2:side:l3|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F4:inner:F2:side:l4|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:inner:F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
|
|
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
|
|
"Body1/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
|
|
"Body1/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"design": "load"
|
|
},
|
|
"typical/holes-pattern-chamfer": {
|
|
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F5:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l3|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F2:start|F3:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F3:face:5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:10": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:start|F4:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:12": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:14": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start|F4:face:5": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:start|F4:face:6": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:start|F4:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:top|F3:face:6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F3:face:7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:17": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:22": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:top|F4:face:24": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F4:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:26": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:4": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:4|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F3:face:5": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F3:face:5|F3:face:9": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F3:face:6": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:6|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:7": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:7|F3:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F3:face:9": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:10|F4:face:32": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:11": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:11|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:face:12": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:12|F4:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:13": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:face:13|F4:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:14": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:14|F4:face:34": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F4:face:15": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:15|F4:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:16": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:16|F4:face:34": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F4:face:17": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:17|F4:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:18": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:18|F4:face:31": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:19": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:face:19|F4:face:31": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane !edge.normal_plane+edit edge.project",
|
|
"Body1/F4:face:22": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:face:22|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:face:23": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:23|F4:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:24": "curved.axis curved.tangent_plane",
|
|
"Body1/F4:face:24|F4:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:25": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F4:face:25|F4:face:29": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane !edge.normal_plane+edit edge.project",
|
|
"Body1/F4:face:26": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:face:26|F4:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:27": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F4:face:27|F4:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:29": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:31": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:31|F4:face:6": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:31|F4:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:32": "!face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.shell+edit !face.sketch",
|
|
"Body1/F4:face:33": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F4:face:33|F4:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:face:33|F4:face:5": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:face:34": "!face.extrude !face.hole !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F4:face:4": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:face:5": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F4:face:6": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F4:face:7": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:blend:F2:side:l2|F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F5:blend:F2:side:l3|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F5:blend:F2:side:l2|F2:top & F5:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F5:blend:F2:side:l3|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:start & F3:face:4 & F3:face:5]": "vertex.point",
|
|
"Body1/v[F2:start & F3:face:4 & F3:face:5] (2)": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:10 & F4:face:11]": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:10 & F4:face:11] (2)": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:12 & F4:face:13]": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:12 & F4:face:13] (2)": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:14 & F4:face:15]": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:14 & F4:face:15] (2)": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:4 & F4:face:5]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:start & F4:face:4 & F4:face:5] (2)": "vertex.point",
|
|
"Body1/v[F2:start & F4:face:6 & F4:face:7]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:start & F4:face:6 & F4:face:7] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F3:face:6 & F3:face:7]": "vertex.point",
|
|
"Body1/v[F2:top & F3:face:6 & F3:face:7] (2)": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:top & F4:face:16 & F4:face:17]": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:16 & F4:face:17] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:18 & F4:face:19]": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:18 & F4:face:19] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:22 & F4:face:23]": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:22 & F4:face:23] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:24 & F4:face:25]": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:24 & F4:face:25] (2)": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:26 & F4:face:27]": "vertex.point",
|
|
"Body1/v[F2:top & F4:face:26 & F4:face:27] (2)": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:top & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:top & F5:blend:F2:side:l2|F2:top & F5:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F5:blend:F2:side:l3|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:4 & F3:face:5 & F3:face:9]": "vertex.point",
|
|
"Body1/v[F3:face:4 & F3:face:5 & F3:face:9] (2)": "vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:9]": "vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:9] (2)": "vertex.point",
|
|
"Body1/v[F4:face:10 & F4:face:11 & F4:face:32]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F4:face:10 & F4:face:11 & F4:face:32] (2)": "vertex.point",
|
|
"Body1/v[F4:face:12 & F4:face:13 & F4:face:29]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F4:face:12 & F4:face:13 & F4:face:29] (2)": "vertex.point",
|
|
"Body1/v[F4:face:14 & F4:face:15 & F4:face:34]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F4:face:14 & F4:face:15 & F4:face:34] (2)": "vertex.point",
|
|
"Body1/v[F4:face:16 & F4:face:17 & F4:face:34]": "vertex.point",
|
|
"Body1/v[F4:face:16 & F4:face:17 & F4:face:34] (2)": "vertex.point",
|
|
"Body1/v[F4:face:18 & F4:face:19 & F4:face:31]": "vertex.point",
|
|
"Body1/v[F4:face:18 & F4:face:19 & F4:face:31] (2)": "vertex.point vertex.point+edit",
|
|
"Body1/v[F4:face:22 & F4:face:23 & F4:face:32]": "vertex.point",
|
|
"Body1/v[F4:face:22 & F4:face:23 & F4:face:32] (2)": "vertex.point",
|
|
"Body1/v[F4:face:24 & F4:face:25 & F4:face:29]": "vertex.point vertex.point+edit",
|
|
"Body1/v[F4:face:24 & F4:face:25 & F4:face:29] (2)": "vertex.point",
|
|
"Body1/v[F4:face:26 & F4:face:27 & F4:face:33]": "vertex.point",
|
|
"Body1/v[F4:face:26 & F4:face:27 & F4:face:33] (2)": "vertex.point",
|
|
"Body1/v[F4:face:31 & F4:face:6 & F4:face:7]": "vertex.point",
|
|
"Body1/v[F4:face:31 & F4:face:6 & F4:face:7] (2)": "vertex.point",
|
|
"Body1/v[F4:face:33 & F4:face:4 & F4:face:5]": "vertex.point",
|
|
"Body1/v[F4:face:33 & F4:face:4 & F4:face:5] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"typical/loft": {
|
|
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
|
|
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
|
|
"Body1/F6:end": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F6:end|F6:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F6:end|F6:side:l6": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:end|F6:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F6:end|F6:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l5|F6:side:l6": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F6:side:l5|F6:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l5|F6:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l6|F6:side:l7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l6|F6:start": "edge.axis edge.axis+edit !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l7|F6:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l7|F6:start": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:l8|F6:start": "edge.axis edge.axis+edit !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:start": "face.angle_plane !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:end & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:end & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F6:end & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:end & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l5 & F6:side:l6 & F6:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l5 & F6:side:l8 & F6:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l6 & F6:side:l7 & F6:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F6:side:l7 & F6:side:l8 & F6:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"design": "load"
|
|
},
|
|
"typical/multi-body-join-cut": {
|
|
"Block/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F1:+x|F1:+y~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+x|F1:+y~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+x|F1:-y~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Block/F1:+x|F1:-y~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Block/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F1:+y": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+y|F1:-x~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+y|F1:-x~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+y|F1:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+z": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Block/F1:+z|F1:-x~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F1:+z|F1:-x~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+z|F2:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+z|F2:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+z|F4:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+z|F4:+y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F1:-x|F1:-y~1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F1:-x|F1:-y~2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F1:-x|F1:-z~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:-x|F1:-z~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:-x|F1:-z~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:-x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F1:-x|F4:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Block/F1:-x|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:-y": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Block/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F1:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Block/F2:side#1": "curved.axis curved.tangent_plane",
|
|
"Block/F2:side#1|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F2:side#2": "curved.axis curved.tangent_plane",
|
|
"Block/F2:side#2|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F2:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Block/F4:+x": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Block/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:+y|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Block/F4:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/F4:-y|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Block/F4:-z": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Block/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
|
|
"Block/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F1:+x & F1:+y]": "vertex.point",
|
|
"Block/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F1:+x & F1:-y]": "vertex.point",
|
|
"Block/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:+y & F1:-x]": "vertex.point",
|
|
"Block/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F1:+z & F1:-x & F4:+y]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F1:+z & F1:-x & F4:-y]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F1:+z & F2:side#1 & F2:side#2]": "vertex.point",
|
|
"Block/v[F1:+z & F2:side#1 & F2:side#2] (2)": "vertex.point",
|
|
"Block/v[F1:+z & F4:+x & F4:+y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:+z & F4:+x & F4:-y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Block/v[F1:-x & F1:-y]": "vertex.point",
|
|
"Block/v[F1:-x & F1:-z]": "vertex.point",
|
|
"Block/v[F1:-x & F1:-z] (2)": "vertex.point",
|
|
"Block/v[F1:-x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F1:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F2:side#1 & F2:side#2 & F2:top]": "vertex.point",
|
|
"Block/v[F2:side#1 & F2:side#2 & F2:top] (2)": "vertex.point vertex.point+edit",
|
|
"Block/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
|
|
"Block/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"design": "load"
|
|
},
|
|
"typical/revolved-part": {
|
|
"Body1/F2:side:l1": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l2#1|F2:side:l3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l2#2|F2:side:l3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l2#3": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l2#3|F2:side:l3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3#1|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3#1|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3#1|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3#2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3#2|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l3#3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l4#1|F2:side:l5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l4#2|F2:side:l5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l4#3": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l4#3|F2:side:l5#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:side:l5#1|F2:side:l5#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5#1|F2:side:l5#3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5#1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5#2|F2:side:l5#3": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5#2|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l5#3|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l6#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l6#1|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l6#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l6#2|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l6#3": "curved.axis curved.tangent_plane",
|
|
"Body1/F2:side:l6#3|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l7": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5#1 & F2:side:l5#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5#1 & F2:side:l5#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5#2 & F2:side:l5#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l5#1 & F2:side:l5#2 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l5#1 & F2:side:l5#3 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l5#2 & F2:side:l5#3 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l6#1 & F2:side:l6#2 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l6#1 & F2:side:l6#3 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l6#2 & F2:side:l6#3 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"design": "load"
|
|
},
|
|
"typical/sheet-metal-bracket": {
|
|
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:0|F2:face:2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F2:face:3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F2:face:0|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F5:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:0|F5:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:face:1|F2:face:3": "edge.axis edge.axis+edit !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F5:side:c1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F5:side:c1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F5:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:1|F5:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F2:face:2|F2:face:3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:2|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:3|F3:face:12": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]|F2:face:5#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane !face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.axis+edit edge.normal_plane edge.project",
|
|
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:face:10|F3:face:12": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:11": "curved.axis curved.axis+edit curved.tangent_plane",
|
|
"Body1/F3:face:11|F3:face:12": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:face:12": "face.angle_plane !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:12|F3:face:7": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F3:face:5": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
|
|
"Body1/F3:face:5|F3:face:7": "edge.axis edge.axis+edit !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:5|F3:face:9": "edge.axis edge.axis+edit !edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
|
|
"Body1/F3:face:6|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:face:6|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F3:face:7": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
|
|
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
|
|
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
|
|
"Body1/F5:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F5:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
|
|
"Body1/F5:side:c2#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F5:side:c2#2": "curved.axis curved.tangent_plane",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:3 & F3:face:10 & F3:face:12]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2] & F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:face:0 & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:face:0 & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point vertex.point+edit",
|
|
"Body1/v[F2:face:0 & F5:side:c2#1 & F5:side:c2#2]": "vertex.point",
|
|
"Body1/v[F2:face:0 & F5:side:c2#1 & F5:side:c2#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:2 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:3 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2] & F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:face:1 & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
|
|
"Body1/v[F2:face:1 & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:1 & F5:side:c2#1 & F5:side:c2#2]": "vertex.point",
|
|
"Body1/v[F2:face:1 & F5:side:c2#1 & F5:side:c2#2] (2)": "vertex.point",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F3:face:10 & F3:face:12 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:11 & F3:face:12 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point vertex.point+edit",
|
|
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
},
|
|
"typical/stacked-extrude": {
|
|
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
|
|
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
|
|
"Body1/F2:top": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F2:top|F4:side:l5": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F2:top|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F2:top|F4:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
|
|
"Body1/F4:side:l5|F4:side:l6": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l5|F4:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:side:l6|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
|
|
"Body1/F4:side:l6|F4:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
|
|
"Body1/F4:side:l7|F4:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l7|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/F4:side:l8|F4:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
|
|
"Body1/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
|
|
"Body1/F4:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F4:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c1#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F6:side:c1#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F6:top": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l5 & F4:side:l6]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l5 & F4:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F2:top & F4:side:l6 & F4:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F2:top & F4:side:l7 & F4:side:l8]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:side:l5 & F4:side:l6 & F4:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F4:side:l5 & F4:side:l8 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:side:l6 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F4:side:l7 & F4:side:l8 & F4:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
|
|
"Body1/v[F4:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
|
|
"Body1/v[F4:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
|
|
"Body1/v[F6:side:c1#1 & F6:side:c1#2 & F6:top]": "vertex.point",
|
|
"Body1/v[F6:side:c1#1 & F6:side:c1#2 & F6:top] (2)": "vertex.point",
|
|
"design": "load"
|
|
},
|
|
"typical/sweep": {
|
|
"Body1/F3:end": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:end|F3:side:l1#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:end|F3:side:l2#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:end|F3:side:l3#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:end|F3:side:l4#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#1|F3:side:l1#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#1|F3:side:l1#[F3:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#1|F3:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#1|F3:side:l4#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#2|F3:side:l1#[F3:end]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#2|F3:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#2|F3:side:l4#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#[F3:end]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l1#[F3:end]|F3:side:l2#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#[F3:end]|F3:side:l4#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#[F3:start]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l1#[F3:start]|F3:side:l2#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#[F3:start]|F3:side:l4#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l1#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:side:l2#1|F3:side:l2#[F3:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#1|F3:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:side:l2#2|F3:side:l2#[F3:end]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#2|F3:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#[F3:end]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l2#[F3:end]|F3:side:l3#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#[F3:start]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l2#[F3:start]|F3:side:l3#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l2#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#1|F3:side:l3#2": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#1|F3:side:l3#[F3:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#1|F3:side:l4#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#2|F3:side:l3#[F3:end]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#2|F3:side:l4#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#[F3:end]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l3#[F3:end]|F3:side:l4#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#[F3:start]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l3#[F3:start]|F3:side:l4#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l3#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:side:l4#1": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:side:l4#1|F3:side:l4#[F3:start]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l4#2": "curved.axis curved.tangent_plane",
|
|
"Body1/F3:side:l4#2|F3:side:l4#[F3:end]": "edge.axis edge.normal_plane edge.project",
|
|
"Body1/F3:side:l4#[F3:end]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l4#[F3:start]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/F3:side:l4#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
|
|
"Body1/F3:start": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
|
|
"Body1/body": "body.copy body.mirror body.move body.pattern",
|
|
"Body1/v[F3:end & F3:side:l1#[F3:end] & F3:side:l2#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:end & F3:side:l1#[F3:end] & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:end & F3:side:l2#[F3:end] & F3:side:l3#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:end & F3:side:l3#[F3:end] & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#1 & F3:side:l1#2 & F3:side:l2#1 & F3:side:l2#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#1 & F3:side:l1#2 & F3:side:l4#1 & F3:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#1 & F3:side:l1#[F3:start] & F3:side:l2#1 & F3:side:l2#[F3:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#1 & F3:side:l1#[F3:start] & F3:side:l4#1 & F3:side:l4#[F3:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#2 & F3:side:l1#[F3:end] & F3:side:l2#2 & F3:side:l2#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#2 & F3:side:l1#[F3:end] & F3:side:l4#2 & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#[F3:start] & F3:side:l2#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l1#[F3:start] & F3:side:l4#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l2#1 & F3:side:l2#2 & F3:side:l3#1 & F3:side:l3#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l2#1 & F3:side:l2#[F3:start] & F3:side:l3#1 & F3:side:l3#[F3:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l2#2 & F3:side:l2#[F3:end] & F3:side:l3#2 & F3:side:l3#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l2#[F3:start] & F3:side:l3#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l3#1 & F3:side:l3#2 & F3:side:l4#1 & F3:side:l4#2]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l3#1 & F3:side:l3#[F3:start] & F3:side:l4#1 & F3:side:l4#[F3:start]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l3#2 & F3:side:l3#[F3:end] & F3:side:l4#2 & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
|
|
"Body1/v[F3:side:l3#[F3:start] & F3:side:l4#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
|
|
"design": "load"
|
|
}
|
|
}
|
|
}
|