1328 lines
65 KiB
Rust
1328 lines
65 KiB
Rust
//! Solid feature commands: extrude, revolve, fillet, chamfer, primitives, combine, move.
|
||
|
||
use serde_json::{Value, json};
|
||
use solvecraft_doc::{AxisRef, Direction, Extent, FeatureKind, Operation, PointExpr, ProfileSel, expr::Kind, point_expr};
|
||
use solvecraft_geom::Vec3;
|
||
|
||
use super::CommandSpec;
|
||
use crate::params::{bad, bool_, expr, req_expr, str_, string_list, vec2, vec3};
|
||
use crate::{EngineError, Result, Session};
|
||
|
||
pub static COMMANDS: &[CommandSpec] = &[
|
||
CommandSpec::new("solid.extrude", "Extrude", extrude)
|
||
.at("SOLID", "CREATE")
|
||
.icon("extrude")
|
||
.key("E")
|
||
.params("distance: expr (or through_all: true); taper?: angle expr; sketch?: id|name (default: active or last sketch); profiles?: all | [index] | [[curve ids]] | [{point:[x,y]}]; face?: [x,y,z] (extrude a planar body face instead of a sketch profile); direction?: positive|negative|symmetric; distance2?; start_offset?: expr (along the sketch normal, also with direction: negative); to?: [x,y,z] (To Object: a face, vertex or point; to_offset?: expr past it); from?: [x,y,z] (From Object: start at that face or point); operation?: new|join|cut|intersect|auto (cut into a body, otherwise join existing solids; new in an empty component); targets?: [body]; name?; body_name?"),
|
||
CommandSpec::new("solid.revolve", "Revolve", revolve)
|
||
.at("SOLID", "CREATE")
|
||
.icon("revolve")
|
||
.params("axis: sketch line id | x | y (sketch axes) | X|Y|Z (world); angle?: expr (default 360 deg); angle2?: expr (Two Sides: the other side's angle); direction?: symmetric (angle split either side); to?: [x,y,z] (To Object: turn until that face, vertex or point); sketch?, profiles? | face: [x,y,z] (a planar body face as the profile), operation?, targets?, name?, body_name?"),
|
||
CommandSpec::new("solid.sweep", "Sweep", sweep)
|
||
.at("SOLID", "CREATE")
|
||
.icon("sweep")
|
||
.params("sketch: profile sketch; profiles?; path_sketch: sketch; path: [curve ids in order]; operation?"),
|
||
CommandSpec::new("solid.loft", "Loft", loft).at("SOLID", "CREATE").icon("loft").params("sections: [{sketch, profiles?} | {sketch, point: id} (an apex)] (2 or more, in order); operation?"),
|
||
CommandSpec::new("solid.box", "Box", prim_box).at("SOLID", "CREATE").icon("box").params("length, width, height: expr; corner?: [x,y,z] | center?: [x,y,z] (numbers in mm or length expressions; default: the origin); operation?"),
|
||
CommandSpec::new("solid.cylinder", "Cylinder", prim_cylinder).at("SOLID", "CREATE").icon("cylinder").params("radius | diameter, height: expr; base?: [x,y,z] (centre of the bottom: numbers in mm or length expressions; default: the origin); axis?: X|Y|Z|[x,y,z] (default Z); operation?"),
|
||
CommandSpec::new("solid.sphere", "Sphere", prim_sphere).at("SOLID", "CREATE").icon("sphere").params("radius | diameter: expr; center?: [x,y,z] (numbers in mm or length expressions; default: the origin); operation?"),
|
||
CommandSpec::new("solid.torus", "Torus", prim_torus).at("SOLID", "CREATE").icon("torus").params("major, minor: expr (radii); center?: [x,y,z] (numbers in mm or length expressions; default: the origin); operation?"),
|
||
CommandSpec::new("solid.fillet", "Fillet", fillet)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("fillet")
|
||
.key("F")
|
||
.params("edges: [[x,y,z] point on edge | {body, index}]; radius: expr; body?; type?: constant|chord (radius is the width across)|variable (radius at the end nearest start, radius2 at the other); radius2?; start?: [x,y,z]; mid?: [[position 0…1 from start, radius expr], …] (variable radii between the ends); smooth?: bool (smooth instead of straight between the radii)"),
|
||
CommandSpec::new("solid.chamfer", "Chamfer", chamfer).at("SOLID", "MODIFY").icon("chamfer").params("edges: [[x,y,z] | {body, index}]; distance: expr; distance2?: expr (along the second face) | angle?: expr (from the first face); flip?: bool (which face is first: by default the one facing up most); body?"),
|
||
CommandSpec::new("solid.combine", "Combine", combine).at("SOLID", "MODIFY").icon("combine").params("target: body; tools: [body]; operation?: join|cut|intersect; keep_tools?: bool; new_component?: bool (the result goes into a new component; component_name?)"),
|
||
CommandSpec::new("solid.pattern.rectangular", "Rectangular Pattern", pattern_rect)
|
||
.at("SOLID", "CREATE")
|
||
.icon("pattern_rect")
|
||
.params("features: [names] | bodies: [names] | components: [names]; dir1: [x,y,z]; count1; spacing1; dir2?, count2?, spacing2?"),
|
||
CommandSpec::new("solid.pattern.circular", "Circular Pattern", pattern_circ)
|
||
.at("SOLID", "CREATE")
|
||
.icon("pattern_circ")
|
||
.params("features: [names] | bodies: [names] | components: [names]; axis: X|Y|Z | {origin, dir}; count; angle? (default 360 deg)"),
|
||
CommandSpec::new("solid.pattern.path", "Pattern on Path", pattern_path)
|
||
.at("SOLID", "CREATE")
|
||
.icon("pattern_rect")
|
||
.params("features: [names] | bodies: [names]; path_sketch: sketch; path: [curve ids in order]; count; spacing (between instances) | distance (first to last); orientation?: identical|path; flip?: bool"),
|
||
CommandSpec::new("solid.mirror", "Mirror", mirror).at("SOLID", "CREATE").icon("mirror").params("features: [names] | bodies: [names] (combine?: join with the original); plane: XY|XZ|YZ|construction plane name or id|{origin, normal}|{origin, x_dir, y_dir} (a construction plane keeps the mirror following it)"),
|
||
CommandSpec::new("solid.hole", "Hole", hole)
|
||
.at("SOLID", "CREATE")
|
||
.icon("hole")
|
||
.key("H")
|
||
.params("position: [x,y,z] on a face | sketch + points: [sketch point ids] (one hole each, perpendicular to the sketch) | sketch alone (every sketch point: standalone points and circle centres); direction?: [x,y,z] (default: into the face); diameter | thread (a tapped hole: the tap drill, major − pitch) | clearance: \"M6\" with fit?: close|normal|loose (ISO 273); depth? (default through all) | to?: [x,y,z] (To Object: drill to that face or point); type?: simple|drilled|counterbore|countersink; tip_angle?; cb_diameter?, cb_depth?; cs_diameter?, cs_angle?; thread?: \"M6\" (cosmetic)"),
|
||
CommandSpec::new("solid.pipe", "Pipe", pipe)
|
||
.at("SOLID", "CREATE")
|
||
.icon("pipe")
|
||
.params("path_sketch: sketch; path: [curve ids in order]; diameter: expr; wall?: expr (hollow); operation?, targets?, name?, body_name?"),
|
||
CommandSpec::new("solid.bounding_solid", "Bounding Solid", bounding_solid)
|
||
.at("SOLID", "CREATE")
|
||
.icon("box")
|
||
.params("bodies?: [names] (default: all); margin?: expr; name?, body_name?"),
|
||
CommandSpec::new("solid.scale", "Scale", scale)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("scale")
|
||
.params("bodies: [names]; factor: expr | factors: [x, y, z] exprs; origin?: [x,y,z]"),
|
||
CommandSpec::new("face.delete", "Delete Face", delete_face)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("delete")
|
||
.params("faces: [[x,y,z] points on the faces]; body?. The neighbouring planes close the gap, as when a rounded edge, hole or boss is taken off"),
|
||
CommandSpec::new("solid.offset_face", "Offset Face", offset_face)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("offset_face")
|
||
.params("faces: [[x,y,z] points on planar faces]; distance: expr (positive: outward); body?"),
|
||
CommandSpec::new("solid.thread", "Thread", thread)
|
||
.at("SOLID", "CREATE")
|
||
.icon("thread")
|
||
.params("face: [x,y,z] on a cylindrical face; designation?: ISO metric (\"M8\", \"M8x1\"; default: the size that fits); length?: expr (default: the whole face). Cosmetic: the model is unchanged, model.threads lists it"),
|
||
CommandSpec::new("solid.shell", "Shell", shell)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("shell")
|
||
.params("faces: [[x,y,z] points on the faces to remove]; thickness: expr; direction?: inside|outside|both; tangent_chain?: bool (also open faces joined smoothly to the picked ones); body?"),
|
||
CommandSpec::new("solid.draft", "Draft", draft)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("draft")
|
||
.params("faces: [[x,y,z]]; angle: expr; neutral: XY|XZ|YZ|plane name|{origin, normal}; pull?: [x,y,z] (default: neutral plane normal); body?"),
|
||
CommandSpec::new("construct.plane.offset", "Offset Plane", plane_offset)
|
||
.at("SOLID", "CONSTRUCT")
|
||
.icon("plane")
|
||
.params("base: XY|XZ|YZ|plane name; offset: expr; name?"),
|
||
CommandSpec::new("construct.plane.at_angle", "Plane at Angle", plane_angle)
|
||
.at("SOLID", "CONSTRUCT")
|
||
.icon("plane")
|
||
.params("base: XY|XZ|YZ|plane name; axis: X|Y|Z|{origin, dir}; angle: expr; name?"),
|
||
CommandSpec::new("solid.split_face", "Split Face", split_face)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("split")
|
||
.params(
|
||
"faces: [[x,y,z] points on the faces to split]; body?; and the splitting tool: plane: XY|XZ|YZ|plane name|{origin, normal} — or tool: {body, point} (a face of a body, its surface extended) — or sketch: id or name (its curves, along the sketch's normal)",
|
||
),
|
||
CommandSpec::new("solid.split_body", "Split Body", split_body)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("split")
|
||
.params("body: name; plane: XY|XZ|YZ|plane name|{origin, normal} — or tool: {body, point} (a face of a body, its surface extended)"),
|
||
CommandSpec::new("solid.press_pull", "Press Pull", press_pull)
|
||
.at("SOLID", "MODIFY")
|
||
.icon("presspull")
|
||
.key("Q")
|
||
.params("face: [x,y,z] and distance: expr (positive adds material, negative cuts), or edges: [[x,y,z]…] and distance (a fillet)"),
|
||
CommandSpec::new("solid.move", "Move/Copy", move_bodies).at("SOLID", "MODIFY").icon("move").key("M").params("bodies: [names]; translate?: [x,y,z] (exprs or numbers); axis?: [x,y,z]; angle?: expr"),
|
||
];
|
||
|
||
/// Where an extrude starts and which way is positive: a point inside the (first) profile or
|
||
/// face, and the unit normal.
|
||
fn extrude_base(s: &Session, p: &Value) -> Option<(Vec3, Vec3)> {
|
||
if let Some(fp) = p.get("face").and_then(vec3) {
|
||
return Some((fp, super::face::face_normal(s, fp)?));
|
||
}
|
||
let sid = feature_sketch(s, p, "Extrude").ok()?;
|
||
let st = s.model.state();
|
||
let ss = st.sketch(sid)?;
|
||
let ps = &ss.profiles;
|
||
let q = match profiles(p, "Extrude").ok()? {
|
||
ProfileSel::All => ps.first()?.region.interior_point(),
|
||
ProfileSel::Indices { indices } => ps.get(*indices.first()?)?.region.interior_point(),
|
||
ProfileSel::Points { points } => *points.first()?,
|
||
ProfileSel::Curves { loops } => {
|
||
let mut want: Vec<&String> = loops.first()?.iter().collect();
|
||
want.sort();
|
||
ps.iter()
|
||
.find(|x| {
|
||
let mut have: Vec<&String> = x.outer_curves.iter().collect();
|
||
have.sort();
|
||
have == want
|
||
})?
|
||
.region
|
||
.interior_point()
|
||
}
|
||
};
|
||
Some((ss.plane.to_world(q), ss.plane.normal()))
|
||
}
|
||
|
||
/// What `operation: "auto"` means for an extrude with these parameters: `cut` when it goes
|
||
/// into a body, otherwise `join` when the active component has a solid. Keeping an
|
||
/// addition separate requires an explicit `new` operation.
|
||
pub fn auto_operation(s: &Session, p: &Value) -> Option<&'static str> {
|
||
let d = s.doc.eval(&expr(p, "distance")?, Kind::Length).ok()?;
|
||
let dir = str_(p, "direction").map(str::to_ascii_lowercase);
|
||
let symmetric = dir.as_deref() == Some("symmetric");
|
||
let d = if matches!(dir.as_deref(), Some("negative" | "reverse" | "flip")) { -d } else { d };
|
||
let (base, n) = extrude_base(s, p)?;
|
||
let st = s.model.state();
|
||
if st.bodies.is_empty() || !d.is_finite() {
|
||
return Some("new");
|
||
}
|
||
// Only the active component's bodies take part (or the ones named as participants).
|
||
let parts = string_list(p, "participants");
|
||
let bodies: Vec<_> = st
|
||
.bodies
|
||
.iter()
|
||
.filter(|b| if parts.is_empty() { s.doc.body_component(&b.name, b.feature) == s.active_component } else { parts.contains(&b.name) })
|
||
.collect();
|
||
if bodies.is_empty() {
|
||
return Some("new");
|
||
}
|
||
let inside = |q: Vec3| bodies.iter().any(|b| b.mesh().contains(q));
|
||
if symmetric {
|
||
return Some(if inside(base + n * (d.abs() * 0.5)) || inside(base - n * (d.abs() * 0.5)) { "cut" } else { "join" });
|
||
}
|
||
if inside(base + n * (d * 0.5)) {
|
||
Some("cut")
|
||
} else {
|
||
// A profile can meet material along its side, or only around part of a
|
||
// screw boss. A single point behind its centre cannot establish contact.
|
||
// Default additions to Join and let the boolean merge the actual geometry.
|
||
Some("join")
|
||
}
|
||
}
|
||
|
||
pub(super) fn operation(p: &Value, cmd: &str) -> Result<Operation> {
|
||
match str_(p, "operation") {
|
||
None => Ok(Operation::NewBody),
|
||
Some(o) => Operation::parse(o).ok_or_else(|| bad(cmd, format!("unknown operation `{o}` (new, join, cut, intersect)"))),
|
||
}
|
||
}
|
||
|
||
/// The sketch a feature uses: `sketch` param, the active sketch, or the last sketch.
|
||
pub(super) fn feature_sketch(s: &Session, p: &Value, cmd: &str) -> Result<u64> {
|
||
if let Some(v) = p.get("sketch") {
|
||
let key = match v {
|
||
Value::Number(n) => n.to_string(),
|
||
Value::String(x) => x.clone(),
|
||
_ => return Err(bad(cmd, "`sketch` must be an id or name")),
|
||
};
|
||
let f = s.doc.find_feature(&key).ok_or_else(|| bad(cmd, format!("no sketch `{key}`")))?;
|
||
return match f.kind {
|
||
FeatureKind::Sketch { .. } => Ok(f.id),
|
||
_ => Err(bad(cmd, format!("`{key}` is not a sketch"))),
|
||
};
|
||
}
|
||
if let Some(a) = s.active_sketch {
|
||
return Ok(a);
|
||
}
|
||
let limit = s.doc.marker.unwrap_or(usize::MAX);
|
||
s.doc
|
||
.features
|
||
.iter()
|
||
.take(limit)
|
||
.rev()
|
||
.find(|f| matches!(f.kind, FeatureKind::Sketch { .. }))
|
||
.map(|f| f.id)
|
||
.ok_or_else(|| bad(cmd, "there is no sketch to use (create one first)"))
|
||
}
|
||
|
||
/// Profile indices become the curve ids of each profile's loops as the sketch is now solved.
|
||
fn stable_profiles(s: &Session, kind: &mut FeatureKind) -> Result<()> {
|
||
let st = s.model.state();
|
||
'sels: for (sketch, sel) in kind.profile_sels_mut() {
|
||
let ProfileSel::Indices { indices } = sel else { continue };
|
||
let Some(ss) = st.sketch(sketch) else { continue };
|
||
let mut loops = Vec::with_capacity(indices.len());
|
||
for i in indices.iter() {
|
||
let pr = ss
|
||
.profiles
|
||
.get(*i)
|
||
.ok_or_else(|| EngineError::Other(format!("no profile {i} in sketch `{}` (it has {})", ss.name, ss.profiles.len())))?;
|
||
// Two profiles with the same outer curves (one inside the other's holes cannot be):
|
||
// keep the index then.
|
||
if pr.outer_curves.is_empty() || ss.profiles.iter().filter(|q| same_loop(&q.outer_curves, &pr.outer_curves)).count() != 1 {
|
||
continue 'sels;
|
||
}
|
||
loops.push(pr.outer_curves.clone());
|
||
}
|
||
*sel = ProfileSel::Curves { loops };
|
||
}
|
||
Ok(())
|
||
}
|
||
|
||
fn same_loop(a: &[String], b: &[String]) -> bool {
|
||
let (mut a, mut b) = (a.to_vec(), b.to_vec());
|
||
a.sort();
|
||
b.sort();
|
||
a == b
|
||
}
|
||
|
||
pub(super) fn profiles(p: &Value, cmd: &str) -> Result<ProfileSel> {
|
||
let Some(v) = p.get("profiles") else { return Ok(ProfileSel::All) };
|
||
match v {
|
||
Value::String(s) if s.eq_ignore_ascii_case("all") => Ok(ProfileSel::All),
|
||
Value::Number(n) => Ok(ProfileSel::Indices { indices: vec![n.as_u64().ok_or_else(|| bad(cmd, "profile index"))? as usize] }),
|
||
Value::Array(a) if a.is_empty() => Err(bad(cmd, "`profiles` is empty")),
|
||
Value::Array(a) if a.len() > 10_000 => Err(bad(cmd, "too many profiles")),
|
||
Value::Array(a) => {
|
||
if a.iter().all(Value::is_u64) {
|
||
return Ok(ProfileSel::Indices { indices: a.iter().filter_map(Value::as_u64).map(|x| x as usize).collect() });
|
||
}
|
||
if a.iter().all(|x| x.get("point").is_some()) {
|
||
let pts =
|
||
a.iter().map(|x| x.get("point").and_then(vec2).ok_or_else(|| bad(cmd, "profile point must be [x, y]"))).collect::<Result<_>>()?;
|
||
return Ok(ProfileSel::Points { points: pts });
|
||
}
|
||
// [[ids]], [{curves: [...]}] or recipe-style [{loops: [{outer: true, curves: [...]}]}].
|
||
let mut loops = Vec::new();
|
||
for x in a {
|
||
let ids: Vec<String> = match x {
|
||
Value::Array(ids) => ids.iter().filter_map(|i| i.as_str().map(str::to_string)).collect(),
|
||
Value::Object(o) => {
|
||
if let Some(c) = o.get("curves") {
|
||
string_list(&json!({"c": c}), "c")
|
||
} else if let Some(ls) = o.get("loops").and_then(Value::as_array) {
|
||
let outer = ls.iter().find(|l| l.get("outer").and_then(Value::as_bool).unwrap_or(true)).or(ls.first());
|
||
outer.map(|l| string_list(l, "curves")).unwrap_or_default()
|
||
} else {
|
||
Vec::new()
|
||
}
|
||
}
|
||
_ => Vec::new(),
|
||
};
|
||
if ids.is_empty() {
|
||
return Err(bad(cmd, "each profile must be an index, a list of curve ids, {curves}, {loops} or {point}"));
|
||
}
|
||
loops.push(ids);
|
||
}
|
||
Ok(ProfileSel::Curves { loops })
|
||
}
|
||
_ => Err(bad(cmd, "`profiles` must be \"all\" or a list")),
|
||
}
|
||
}
|
||
|
||
pub(super) fn check_expr(s: &Session, e: &str, kind: Kind, cmd: &str, what: &str) -> Result<()> {
|
||
s.doc.eval(e, kind).map(|_| ()).map_err(|err| bad(cmd, format!("{what}: {err}")))
|
||
}
|
||
|
||
/// Add a feature, evaluate, and report its result (an evaluation error fails the command).
|
||
pub(super) fn add_feature(s: &mut Session, p: &Value, kind: FeatureKind) -> Result<Value> {
|
||
let name = str_(p, "name");
|
||
// Commands speak world coordinates; the feature is authored in the active component.
|
||
let mut kind = kind;
|
||
super::component::to_active_frame(s, &mut kind);
|
||
// Bare lengths typed in an inch (or cm…) design mean that unit.
|
||
if s.doc.units.trim() != "mm" {
|
||
let doc = s.doc.clone();
|
||
for (_, e, k) in kind.inputs_mut() {
|
||
*e = doc.with_design_unit(e, k);
|
||
}
|
||
}
|
||
// Profiles picked by index are kept by the curves around them: a recompute can renumber a
|
||
// sketch's profiles (a face sketch's projected outline rebuilt), never the curves.
|
||
stable_profiles(s, &mut kind)?;
|
||
// Blends remember where their edges sat, to find them again after upstream edits.
|
||
let (refs, names) = match &kind {
|
||
FeatureKind::Fillet { edges, body, .. } | FeatureKind::Chamfer { edges, body, .. } => {
|
||
let st = s.model.state();
|
||
(solvecraft_doc::edge_refs(&st, body, edges), solvecraft_doc::edge_names_for(&st, body, edges))
|
||
}
|
||
// Sheet metal edges are named by the sheet model.
|
||
FeatureKind::SheetFlange { edges, .. } | FeatureKind::SheetHem { edges, .. } => {
|
||
(Vec::new(), solvecraft_doc::sheet::sheet_edge_names(&s.model.state(), edges))
|
||
}
|
||
_ => (Vec::new(), Vec::new()),
|
||
};
|
||
let face_names = {
|
||
let pts = kind.face_points();
|
||
if pts.is_empty() { Vec::new() } else { solvecraft_doc::naming::face_names_at(&s.model.state(), &pts) }
|
||
};
|
||
let participants = string_list(p, "participants");
|
||
if participants.len() > 10_000 || participants.iter().any(|b| b != "*" && s.model.state().body(b).is_none()) {
|
||
return Err(EngineError::Other("`participants` must list existing bodies".into()));
|
||
}
|
||
let id = s.doc_mut().add_feature(kind, name)?;
|
||
if let Some(f) = s.doc_mut().feature_mut(id) {
|
||
f.participants = participants;
|
||
f.edge_refs = refs;
|
||
f.edge_names = names;
|
||
f.face_names = face_names;
|
||
}
|
||
s.doc_mut().name_feature_inputs(id);
|
||
let comp = s.active_component;
|
||
if comp != 0
|
||
&& let Some(f) = s.doc_mut().feature_mut(id)
|
||
{
|
||
f.component = comp;
|
||
}
|
||
let mut names = string_list(p, "body_names");
|
||
if let Some(b) = str_(p, "body_name") {
|
||
names.insert(0, b.to_string());
|
||
}
|
||
if !names.is_empty()
|
||
&& let Some(f) = s.doc_mut().feature_mut(id)
|
||
{
|
||
f.body_names = names;
|
||
}
|
||
s.active_sketch = None;
|
||
s.refresh();
|
||
let r = s.model.result(id).cloned();
|
||
if let Some(e) = r.as_ref().and_then(|r| r.error.clone()) {
|
||
return Err(EngineError::Other(e));
|
||
}
|
||
let st = s.model.state();
|
||
let bodies: Vec<&str> = st.bodies.iter().map(|b| b.name.as_str()).collect();
|
||
let fname = s.doc.feature(id).map(|f| f.name.clone()).unwrap_or_default();
|
||
Ok(json!({"feature": id, "name": fname, "bodies": bodies, "ms": r.map(|r| r.ms)}))
|
||
}
|
||
|
||
fn extrude(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.extrude";
|
||
// A planar body face extrudes like a profile: its boundary is copied into a sketch on it.
|
||
let (sketch, face_profile) = match p.get("face").and_then(vec3) {
|
||
Some(fp) => {
|
||
let (id, inside) = super::face::sketch_of_face(s, fp, cmd)?;
|
||
(id, Some(ProfileSel::Points { points: vec![inside] }))
|
||
}
|
||
None => (feature_sketch(s, p, cmd)?, None),
|
||
};
|
||
let through_all = bool_(p, "through_all").unwrap_or(false) || str_(p, "extent").is_some_and(|e| e.eq_ignore_ascii_case("through_all"));
|
||
let to_object = p.get("to").is_some();
|
||
if to_object && p.get("to").and_then(vec3).is_none() {
|
||
return Err(bad(cmd, "`to` must be a point [x, y, z] on the face, vertex or point to extrude to"));
|
||
}
|
||
if p.get("from").is_some() && p.get("from").and_then(vec3).is_none() {
|
||
return Err(bad(cmd, "`from` must be a point [x, y, z] on the face or point to start from"));
|
||
}
|
||
let distance = if through_all || to_object { expr(p, "distance").unwrap_or_else(|| "0".into()) } else { req_expr(cmd, p, "distance")? };
|
||
check_expr(s, &distance, Kind::Length, cmd, "distance")?;
|
||
let taper = expr(p, "taper");
|
||
if let Some(t) = &taper {
|
||
check_expr(s, t, Kind::Angle, cmd, "taper")?;
|
||
}
|
||
let direction = match str_(p, "direction").map(str::to_ascii_lowercase).as_deref() {
|
||
None | Some("positive") | Some("one_side") => Direction::Positive,
|
||
Some("negative") | Some("reverse") | Some("flip") => Direction::Negative,
|
||
Some("symmetric") => Direction::Symmetric,
|
||
Some(o) => return Err(bad(cmd, format!("unknown direction `{o}`"))),
|
||
};
|
||
let distance2 = expr(p, "distance2");
|
||
if let Some(d) = &distance2 {
|
||
check_expr(s, d, Kind::Length, cmd, "distance2")?;
|
||
}
|
||
let start_offset = expr(p, "start_offset");
|
||
if let Some(d) = &start_offset {
|
||
check_expr(s, d, Kind::Length, cmd, "start_offset")?;
|
||
}
|
||
let kind = FeatureKind::Extrude {
|
||
sketch,
|
||
profiles: match face_profile {
|
||
Some(f) => f,
|
||
None => profiles(p, cmd)?,
|
||
},
|
||
extent: Extent {
|
||
distance,
|
||
direction,
|
||
distance2,
|
||
start_offset,
|
||
through_all,
|
||
taper,
|
||
to: p.get("to").and_then(vec3),
|
||
to_offset: expr(p, "to_offset"),
|
||
from: p.get("from").and_then(vec3),
|
||
},
|
||
operation: match str_(p, "operation") {
|
||
Some(o) if o.eq_ignore_ascii_case("auto") => Operation::parse(auto_operation(s, p).unwrap_or("new")).unwrap_or(Operation::NewBody),
|
||
_ => operation(p, cmd)?,
|
||
},
|
||
targets: string_list(p, "targets"),
|
||
};
|
||
add_feature(s, p, kind)
|
||
}
|
||
|
||
fn revolve(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.revolve";
|
||
// A planar body face revolves like a profile (its edges projected into a sketch on it).
|
||
let (sketch, face_profile) = match p.get("face").and_then(vec3) {
|
||
Some(fp) => {
|
||
let (id, inside) = super::face::sketch_of_face(s, fp, cmd)?;
|
||
s.active_sketch = None;
|
||
(id, Some(ProfileSel::Points { points: vec![inside] }))
|
||
}
|
||
None => (feature_sketch(s, p, cmd)?, None),
|
||
};
|
||
let axis = if let Some(o) = p.get("axis").filter(|v| v.is_object()) {
|
||
let origin = o.get("origin").and_then(vec3).unwrap_or(Vec3::ZERO);
|
||
let dir = o.get("dir").and_then(vec3).ok_or_else(|| bad(cmd, "axis needs `dir`"))?;
|
||
AxisRef::Line { origin, dir }
|
||
} else {
|
||
match str_(p, "axis") {
|
||
Some(a @ ("X" | "Y" | "Z")) => AxisRef::World { axis: a.into() },
|
||
Some(a @ ("x" | "y")) => AxisRef::SketchAxis { axis: a.into() },
|
||
Some(id) => AxisRef::SketchLine { curve: id.into() },
|
||
None => return Err(bad(cmd, "`axis` must be a sketch line id, x, y (sketch axes), X, Y, Z or {origin, dir}")),
|
||
}
|
||
};
|
||
let angle = expr(p, "angle").unwrap_or_else(|| "360 deg".into());
|
||
check_expr(s, &angle, Kind::Angle, cmd, "angle")?;
|
||
let profiles = match face_profile {
|
||
Some(f) => f,
|
||
None => profiles(p, cmd)?,
|
||
};
|
||
let angle2 = expr(p, "angle2");
|
||
if let Some(a) = &angle2 {
|
||
check_expr(s, a, Kind::Angle, cmd, "angle2")?;
|
||
}
|
||
let to = match p.get("to") {
|
||
Some(v) => Some(vec3(v).ok_or_else(|| bad(cmd, "`to` must be a point [x, y, z] to turn to"))?),
|
||
None => None,
|
||
};
|
||
let symmetric =
|
||
matches!(str_(p, "direction").map(str::to_ascii_lowercase).as_deref(), Some("symmetric")) || bool_(p, "symmetric").unwrap_or(false);
|
||
let kind = FeatureKind::Revolve {
|
||
sketch,
|
||
profiles,
|
||
axis,
|
||
angle,
|
||
operation: operation(p, cmd)?,
|
||
targets: string_list(p, "targets"),
|
||
angle2,
|
||
symmetric,
|
||
to,
|
||
};
|
||
add_feature(s, p, kind)
|
||
}
|
||
|
||
fn radius_expr(p: &Value, cmd: &str) -> Result<String> {
|
||
match (expr(p, "radius"), expr(p, "diameter")) {
|
||
(Some(r), _) => Ok(r),
|
||
(None, Some(d)) => Ok(format!("({d}) / 2")),
|
||
_ => Err(bad(cmd, "needs `radius` or `diameter`")),
|
||
}
|
||
}
|
||
|
||
/// A placement point: `[x, y, z]` (or `{x, y, z}`) of numbers (mm) or length expressions;
|
||
/// the origin when it is not given. Anything else is refused (never read as the origin).
|
||
pub(super) fn point_param(s: &Session, p: &Value, key: &str, cmd: &str) -> Result<Option<PointExpr>> {
|
||
let Some(v) = p.get(key) else { return Ok(None) };
|
||
let want = || bad(cmd, format!("`{key}` must be a point [x, y, z] of numbers or length expressions"));
|
||
let coords: Vec<&Value> = match v {
|
||
Value::Array(a) if a.len() == 3 => a.iter().collect(),
|
||
Value::Object(o) => ["x", "y", "z"].iter().map(|k| o.get(*k)).collect::<Option<Vec<_>>>().ok_or_else(want)?,
|
||
_ => return Err(want()),
|
||
};
|
||
let mut out = PointExpr::default();
|
||
for (slot, (c, axis)) in out.iter_mut().zip(coords.into_iter().zip(["x", "y", "z"])) {
|
||
let e = expr(&json!({ "v": c }), "v").ok_or_else(want)?;
|
||
let x = s.doc.eval(&e, Kind::Length).map_err(|err| bad(cmd, format!("{key} {axis}: {err}")))?;
|
||
if !(x.is_finite() && x.abs() < 1e9) {
|
||
return Err(bad(cmd, format!("{key} {axis} is out of range")));
|
||
}
|
||
*slot = e;
|
||
}
|
||
Ok(Some(out))
|
||
}
|
||
|
||
/// An axis direction: X|Y|Z or a non-zero `[x, y, z]`; `Z` when it is not given.
|
||
pub(super) fn axis_dir_param(p: &Value, cmd: &str) -> Result<Vec3> {
|
||
match p.get("axis") {
|
||
None => Ok(Vec3::Z),
|
||
Some(Value::String(a)) => match a.trim().to_ascii_uppercase().as_str() {
|
||
"X" => Ok(Vec3::X),
|
||
"Y" => Ok(Vec3::Y),
|
||
"Z" => Ok(Vec3::Z),
|
||
_ => Err(bad(cmd, "`axis` must be X, Y, Z or [x, y, z]")),
|
||
},
|
||
Some(v) => vec3(v).and_then(|a| a.normalized()).ok_or_else(|| bad(cmd, "`axis` must be X, Y, Z or a non-zero [x, y, z]")),
|
||
}
|
||
}
|
||
|
||
fn prim_box(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.box";
|
||
let (l, w, h) = (req_expr(cmd, p, "length")?, req_expr(cmd, p, "width")?, req_expr(cmd, p, "height")?);
|
||
for (e, n) in [(&l, "length"), (&w, "width"), (&h, "height")] {
|
||
check_expr(s, e, Kind::Length, cmd, n)?;
|
||
}
|
||
let corner = match (point_param(s, p, "corner", cmd)?, point_param(s, p, "center", cmd)?) {
|
||
(Some(c), _) => c,
|
||
// The corner half a size back from the centre (numbers stay numbers).
|
||
(None, Some([cx, cy, cz])) => {
|
||
let back = |c: String, size: &String| match (c.parse::<f64>(), size.parse::<f64>()) {
|
||
(Ok(a), Ok(b)) => format!("{}", a - b / 2.0),
|
||
_ => format!("({c}) - ({size}) / 2"),
|
||
};
|
||
[back(cx, &l), back(cy, &w), back(cz, &h)]
|
||
}
|
||
_ => point_expr(Vec3::ZERO),
|
||
};
|
||
add_feature(s, p, FeatureKind::Box { corner, length: l, width: w, height: h, operation: operation(p, cmd)? })
|
||
}
|
||
|
||
fn prim_cylinder(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.cylinder";
|
||
let radius = radius_expr(p, cmd)?;
|
||
let height = req_expr(cmd, p, "height")?;
|
||
check_expr(s, &radius, Kind::Length, cmd, "radius")?;
|
||
check_expr(s, &height, Kind::Length, cmd, "height")?;
|
||
let base = point_param(s, p, "base", cmd)?.unwrap_or_else(|| point_expr(Vec3::ZERO));
|
||
let axis = axis_dir_param(p, cmd)?;
|
||
add_feature(s, p, FeatureKind::Cylinder { base, axis, radius, height, operation: operation(p, cmd)? })
|
||
}
|
||
|
||
fn prim_sphere(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.sphere";
|
||
let radius = radius_expr(p, cmd)?;
|
||
check_expr(s, &radius, Kind::Length, cmd, "radius")?;
|
||
let center = point_param(s, p, "center", cmd)?.unwrap_or_else(|| point_expr(Vec3::ZERO));
|
||
add_feature(s, p, FeatureKind::Sphere { center, radius, operation: operation(p, cmd)? })
|
||
}
|
||
|
||
fn prim_torus(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.torus";
|
||
let (major, minor) = (req_expr(cmd, p, "major")?, req_expr(cmd, p, "minor")?);
|
||
check_expr(s, &major, Kind::Length, cmd, "major")?;
|
||
check_expr(s, &minor, Kind::Length, cmd, "minor")?;
|
||
let center = point_param(s, p, "center", cmd)?.unwrap_or_else(|| point_expr(Vec3::ZERO));
|
||
add_feature(s, p, FeatureKind::Torus { center, major, minor, operation: operation(p, cmd)? })
|
||
}
|
||
|
||
/// Edge references → points on the edges.
|
||
fn edge_points(s: &Session, p: &Value, cmd: &str) -> Result<Vec<Vec3>> {
|
||
let a = p.get("edges").and_then(Value::as_array).ok_or_else(|| bad(cmd, "`edges` must be a list"))?;
|
||
if a.is_empty() || a.len() > 1000 {
|
||
return Err(bad(cmd, "select 1…1000 edges"));
|
||
}
|
||
let st = s.model.state();
|
||
let mut out = Vec::new();
|
||
for e in a {
|
||
if let Some(pt) = vec3(e).or_else(|| e.get("point").and_then(vec3)) {
|
||
out.push(pt);
|
||
continue;
|
||
}
|
||
let body = e.get("body").and_then(Value::as_str).ok_or_else(|| bad(cmd, "an edge is a point [x,y,z], {point} or {body, index}"))?;
|
||
let idx = e.get("index").and_then(Value::as_u64).ok_or_else(|| bad(cmd, "edge `index` must be a number"))? as usize;
|
||
let b = st.body(body).ok_or_else(|| bad(cmd, format!("no body `{body}`")))?;
|
||
let tol = (b.body.size() * 2e-3).max(1e-3);
|
||
let edges = b.body.edges(tol)?;
|
||
out.push(edges.get(idx).ok_or_else(|| bad(cmd, format!("{body} has no edge {idx}")))?.mid);
|
||
}
|
||
Ok(out)
|
||
}
|
||
|
||
/// Press Pull: a face moves along its normal (an extrude that joins outward or cuts inward); an
|
||
/// edge is rounded (a fillet).
|
||
fn press_pull(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.press_pull";
|
||
let distance = req_expr(cmd, p, "distance")?;
|
||
if p.get("edges").is_some() {
|
||
return fillet(s, &json!({"edges": p.get("edges"), "radius": distance}));
|
||
}
|
||
let face = p.get("face").ok_or_else(|| bad(cmd, "needs `face` or `edges`"))?;
|
||
let d = s.doc.eval(&distance, Kind::Length).map_err(|e| bad(cmd, format!("distance: {e}")))?;
|
||
if d.abs() < 1e-9 {
|
||
return Err(bad(cmd, "the distance must not be zero"));
|
||
}
|
||
// A fillet's or chamfer's face: its size changes by the distance (the feature is edited).
|
||
if let Some(fp) = vec3(face)
|
||
&& super::face::face_is_planar(s, fp) == Some(false)
|
||
{
|
||
let name = solvecraft_doc::naming::face_names_at(&s.model.state(), &[fp]).into_iter().next().unwrap_or_default();
|
||
let fid = name.strip_prefix('F').and_then(|r| r.split(':').next()).and_then(|x| x.parse::<u64>().ok());
|
||
if name.contains(":blend") {
|
||
let f = fid.and_then(|id| s.doc.feature(id)).cloned().ok_or_else(|| bad(cmd, "the blend's feature is gone"))?;
|
||
let (key, old) = match &f.kind {
|
||
FeatureKind::Fillet { radius, .. } => ("radius", radius.clone()),
|
||
FeatureKind::Chamfer { distance, .. } => ("distance", distance.clone()),
|
||
_ => return Err(bad(cmd, "that face is not a fillet's or a chamfer's")),
|
||
};
|
||
let new = format!("({old}) + ({distance})");
|
||
let r = super::find_command("timeline.edit").ok_or_else(|| bad(cmd, "timeline.edit"))?;
|
||
let out = (r.run)(s, &json!({"feature": f.id, "set": {key: new}}))?;
|
||
return Ok(json!({"feature": f.id, "edited": f.name, key: new, "recomputed": out.get("recomputed"), "restored": out.get("restored")}));
|
||
}
|
||
// Another curved face moves along its normal.
|
||
let r = super::find_command("solid.offset_face").ok_or_else(|| bad(cmd, "solid.offset_face"))?;
|
||
return (r.run)(s, &json!({"faces": [face], "distance": distance}));
|
||
}
|
||
let (dist, dir, op) = if d > 0.0 { (distance, "positive", "join") } else { (format!("-({distance})"), "negative", "cut") };
|
||
extrude(s, &json!({"face": face, "distance": dist, "direction": dir, "operation": op}))
|
||
}
|
||
|
||
fn fillet(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.fillet";
|
||
let edges = edge_points(s, p, cmd)?;
|
||
let radius = req_expr(cmd, p, "radius")?;
|
||
check_expr(s, &radius, Kind::Length, cmd, "radius")?;
|
||
let style = match str_(p, "type").map(str::to_ascii_lowercase).as_deref() {
|
||
None | Some("constant") | Some("rolling_ball") => solvecraft_doc::FilletStyle::Constant,
|
||
Some("chord") | Some("chord_length") => solvecraft_doc::FilletStyle::Chord,
|
||
Some("variable") => {
|
||
let radius2 = req_expr(cmd, p, "radius2")?;
|
||
check_expr(s, &radius2, Kind::Length, cmd, "radius2")?;
|
||
let start =
|
||
p.get("start").and_then(vec3).ok_or_else(|| bad(cmd, "a variable fillet needs `start`: [x,y,z] near the end that takes `radius`"))?;
|
||
let mut mid = Vec::new();
|
||
for m in p.get("mid").and_then(Value::as_array).into_iter().flatten().take(100) {
|
||
let (Some(t), Some(r)) = (m.get(0).and_then(Value::as_f64), m.get(1)) else {
|
||
return Err(bad(cmd, "`mid` entries are [position, radius]"));
|
||
};
|
||
if !(t.is_finite() && t > 0.0 && t < 1.0) {
|
||
return Err(bad(cmd, "`mid` positions lie between 0 and 1 (from the start end)"));
|
||
}
|
||
let r = match r {
|
||
Value::String(x) => x.clone(),
|
||
Value::Number(n) => n.to_string(),
|
||
_ => return Err(bad(cmd, "a `mid` radius is a number or an expression")),
|
||
};
|
||
check_expr(s, &r, Kind::Length, cmd, "mid radius")?;
|
||
mid.push((t, r));
|
||
}
|
||
let smooth = p.get("smooth").and_then(Value::as_bool).unwrap_or(false);
|
||
solvecraft_doc::FilletStyle::Variable { radius2, start, mid, smooth }
|
||
}
|
||
Some(o) => return Err(bad(cmd, format!("unknown fillet type `{o}` (constant, chord or variable)"))),
|
||
};
|
||
add_feature(s, p, FeatureKind::Fillet { edges, radius, body: str_(p, "body").map(str::to_string), style })
|
||
}
|
||
|
||
fn chamfer(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.chamfer";
|
||
let edges = edge_points(s, p, cmd)?;
|
||
let distance = req_expr(cmd, p, "distance")?;
|
||
check_expr(s, &distance, Kind::Length, cmd, "distance")?;
|
||
let (distance2, angle) = (expr(p, "distance2"), expr(p, "angle"));
|
||
if let Some(d) = &distance2 {
|
||
check_expr(s, d, Kind::Length, cmd, "distance2")?;
|
||
}
|
||
if let Some(a) = &angle {
|
||
check_expr(s, a, Kind::Angle, cmd, "angle")?;
|
||
}
|
||
if distance2.is_some() && angle.is_some() {
|
||
return Err(bad(cmd, "give `distance2` or `angle`, not both"));
|
||
}
|
||
let flip = bool_(p, "flip").unwrap_or(false);
|
||
add_feature(s, p, FeatureKind::Chamfer { edges, distance, distance2, angle, flip, body: str_(p, "body").map(str::to_string) })
|
||
}
|
||
|
||
fn combine(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.combine";
|
||
let target = str_(p, "target").ok_or_else(|| bad(cmd, "`target` must be a body name"))?.to_string();
|
||
let tools = string_list(p, "tools");
|
||
if tools.is_empty() {
|
||
return Err(bad(cmd, "`tools` must list bodies"));
|
||
}
|
||
let op = match str_(p, "operation") {
|
||
None => Operation::Join,
|
||
Some(o) => Operation::parse(o).filter(|o| *o != Operation::NewBody).ok_or_else(|| bad(cmd, "operation must be join, cut or intersect"))?,
|
||
};
|
||
let mut out = add_feature(
|
||
s,
|
||
p,
|
||
FeatureKind::Combine { target: target.clone(), tools, operation: op, keep_tools: bool_(p, "keep_tools").unwrap_or(false) },
|
||
)?;
|
||
// New Component: the result goes into a component of its own.
|
||
if bool_(p, "new_component").unwrap_or(false) {
|
||
let name = str_(p, "component_name").map(str::to_string).unwrap_or_else(|| format!("{target} Combined"));
|
||
let c = s.execute("component.create", &json!({"name": name, "activate": false}))?;
|
||
s.execute("component.move_bodies", &json!({"bodies": [target], "component": c["component"]}))?;
|
||
out["component"] = c["component"].clone();
|
||
}
|
||
Ok(out)
|
||
}
|
||
|
||
fn move_bodies(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.move";
|
||
let bodies = string_list(p, "bodies");
|
||
if bodies.is_empty() {
|
||
return Err(bad(cmd, "`bodies` must list bodies"));
|
||
}
|
||
let t = match p.get("translate") {
|
||
Some(Value::Array(a)) if a.len() == 3 => {
|
||
let mut out: [String; 3] = Default::default();
|
||
for (i, v) in a.iter().enumerate() {
|
||
let e = expr(&json!({"v": v}), "v").ok_or_else(|| bad(cmd, "translate entries must be numbers or expressions"))?;
|
||
check_expr(s, &e, Kind::Length, cmd, "translate")?;
|
||
if let Some(slot) = out.get_mut(i) {
|
||
*slot = e;
|
||
}
|
||
}
|
||
out
|
||
}
|
||
None => ["0".into(), "0".into(), "0".into()],
|
||
_ => return Err(bad(cmd, "`translate` must be [x, y, z]")),
|
||
};
|
||
let angle = expr(p, "angle");
|
||
if let Some(a) = &angle {
|
||
check_expr(s, a, Kind::Angle, cmd, "angle")?;
|
||
}
|
||
add_feature(s, p, FeatureKind::Move { bodies, translate: t, rotate_axis: p.get("axis").and_then(vec3), angle })
|
||
}
|
||
|
||
fn source_features(s: &Session, p: &Value, cmd: &str) -> Result<Vec<String>> {
|
||
let names = string_list(p, "features");
|
||
if names.is_empty() {
|
||
return Err(bad(cmd, "`features` must list features to copy"));
|
||
}
|
||
for n in &names {
|
||
if s.doc.find_feature(n).is_none() {
|
||
return Err(bad(cmd, format!("no feature `{n}`")));
|
||
}
|
||
}
|
||
Ok(names)
|
||
}
|
||
|
||
fn axis_line(p: &Value, cmd: &str) -> Result<(Vec3, Vec3)> {
|
||
match p.get("axis") {
|
||
Some(Value::String(a)) => match a.to_ascii_uppercase().as_str() {
|
||
"X" => Ok((Vec3::ZERO, Vec3::X)),
|
||
"Y" => Ok((Vec3::ZERO, Vec3::Y)),
|
||
"Z" => Ok((Vec3::ZERO, Vec3::Z)),
|
||
_ => Err(bad(cmd, "axis must be X, Y, Z or {origin, dir}")),
|
||
},
|
||
Some(o @ Value::Object(_)) => {
|
||
let origin = o.get("origin").and_then(vec3).unwrap_or(Vec3::ZERO);
|
||
let dir = o.get("dir").and_then(vec3).and_then(|d| d.normalized()).ok_or_else(|| bad(cmd, "axis needs a non-zero `dir`"))?;
|
||
Ok((origin, dir))
|
||
}
|
||
_ => Err(bad(cmd, "`axis` is required")),
|
||
}
|
||
}
|
||
|
||
/// A pattern feature, or for `components`, new occurrences of them at each placement.
|
||
fn finish_pattern(s: &mut Session, p: &Value, features: Vec<String>, pattern: solvecraft_doc::PatternKind, bodies: Vec<String>) -> Result<Value> {
|
||
let comps = string_list(p, "components");
|
||
if comps.is_empty() {
|
||
return add_feature(s, p, FeatureKind::Pattern { features, pattern, bodies });
|
||
}
|
||
let cmd = "pattern (components)";
|
||
let mats = solvecraft_doc::pattern_matrices(&s.doc, &s.model.state(), &pattern)?;
|
||
let mut made = Vec::new();
|
||
for c in &comps {
|
||
let id = s.doc.find_component(c).filter(|id| *id != 0).ok_or_else(|| bad(cmd, format!("no component `{c}`")))?;
|
||
let src = s.doc.occurrence_of(id).cloned().ok_or_else(|| bad(cmd, format!("component `{c}` has no occurrence")))?;
|
||
for m in &mats {
|
||
made.push(s.doc_mut().add_occurrence(id, src.parent, solvecraft_doc::mat_mul(m, &src.transform))?);
|
||
}
|
||
}
|
||
Ok(json!({"occurrences": made}))
|
||
}
|
||
|
||
/// What a pattern copies: features (replayed), bodies (`bodies: [names]`), or components
|
||
/// (`components: [names]`, placed again as occurrences).
|
||
fn pattern_sources(s: &Session, p: &Value, cmd: &str) -> Result<(Vec<String>, Vec<String>)> {
|
||
if !string_list(p, "components").is_empty() {
|
||
return Ok((Vec::new(), Vec::new()));
|
||
}
|
||
let bodies = string_list(p, "bodies");
|
||
if bodies.is_empty() {
|
||
return Ok((source_features(s, p, cmd)?, Vec::new()));
|
||
}
|
||
let st = s.model.state();
|
||
if let Some(b) = bodies.iter().find(|b| st.body(b).is_none()) {
|
||
return Err(bad(cmd, format!("no body `{b}`")));
|
||
}
|
||
Ok((Vec::new(), bodies))
|
||
}
|
||
|
||
fn pattern_rect(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.pattern.rectangular";
|
||
let (features, bodies) = pattern_sources(s, p, cmd)?;
|
||
let dir1 = p.get("dir1").and_then(vec3).ok_or_else(|| bad(cmd, "`dir1` must be [x, y, z]"))?;
|
||
let count1 = req_expr(cmd, p, "count1")?;
|
||
let spacing1 = req_expr(cmd, p, "spacing1")?;
|
||
check_expr(s, &count1, Kind::Unitless, cmd, "count1")?;
|
||
check_expr(s, &spacing1, Kind::Length, cmd, "spacing1")?;
|
||
let dir2 = p.get("dir2").and_then(vec3);
|
||
let (count2, spacing2) = (expr(p, "count2"), expr(p, "spacing2"));
|
||
if let Some(c) = &count2 {
|
||
check_expr(s, c, Kind::Unitless, cmd, "count2")?;
|
||
}
|
||
if let Some(c) = &spacing2 {
|
||
check_expr(s, c, Kind::Length, cmd, "spacing2")?;
|
||
}
|
||
let pattern = solvecraft_doc::PatternKind::Rectangular { dir1, count1, spacing1, dir2, count2, spacing2 };
|
||
finish_pattern(s, p, features, pattern, bodies)
|
||
}
|
||
|
||
fn pattern_circ(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.pattern.circular";
|
||
let (features, bodies) = pattern_sources(s, p, cmd)?;
|
||
let (origin, axis) = axis_line(p, cmd)?;
|
||
let count = req_expr(cmd, p, "count")?;
|
||
check_expr(s, &count, Kind::Unitless, cmd, "count")?;
|
||
let angle = expr(p, "angle").unwrap_or_else(|| "360 deg".into());
|
||
check_expr(s, &angle, Kind::Angle, cmd, "angle")?;
|
||
let pattern = solvecraft_doc::PatternKind::Circular { origin, axis, count, angle };
|
||
finish_pattern(s, p, features, pattern, bodies)
|
||
}
|
||
|
||
fn pattern_path(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.pattern.path";
|
||
let (features, bodies) = pattern_sources(s, p, cmd)?;
|
||
let path_sketch = sketch_id(s, p.get("path_sketch").or_else(|| p.get("sketch")), cmd, "path_sketch")?;
|
||
let path = string_list(p, "path");
|
||
if path.is_empty() || path.len() > 1000 {
|
||
return Err(bad(cmd, "`path` must list 1…1000 curve ids"));
|
||
}
|
||
let count = req_expr(cmd, p, "count")?;
|
||
check_expr(s, &count, Kind::Unitless, cmd, "count")?;
|
||
let (spacing, extent) = match (expr(p, "spacing"), expr(p, "distance")) {
|
||
(Some(x), _) => (x, false),
|
||
(None, Some(x)) => (x, true),
|
||
(None, None) => return Err(bad(cmd, "give `spacing` (between instances) or `distance` (first to last)")),
|
||
};
|
||
check_expr(s, &spacing, Kind::Length, cmd, "spacing")?;
|
||
let orient = match str_(p, "orientation") {
|
||
None | Some("identical") => false,
|
||
Some("path" | "path_direction" | "along_path") => true,
|
||
Some(o) => return Err(bad(cmd, format!("unknown orientation `{o}` (identical or path)"))),
|
||
};
|
||
let flip = bool_(p, "flip").unwrap_or(false);
|
||
let pattern = solvecraft_doc::PatternKind::Path { path_sketch, path, count, spacing, extent, flip, orient };
|
||
finish_pattern(s, p, features, pattern, bodies)
|
||
}
|
||
|
||
fn mirror(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.mirror";
|
||
let bodies = string_list(p, "bodies");
|
||
let features = if bodies.is_empty() { source_features(s, p, cmd)? } else { Vec::new() };
|
||
let plane = plane_param(s, p.get("plane"), cmd)?;
|
||
let combine = bool_(p, "combine").unwrap_or(false);
|
||
add_feature(s, p, FeatureKind::Mirror { features, plane, bodies, combine })
|
||
}
|
||
|
||
/// A plane reference from a parameter: an origin plane, a construction plane (by name or
|
||
/// feature id; kept by name, so the feature follows the plane when it changes), or an
|
||
/// explicit plane `{origin, x_dir, y_dir}` / `{origin, normal}`. Every command that takes a
|
||
/// plane reads it here.
|
||
pub(super) fn plane_param(s: &Session, v: Option<&Value>, cmd: &str) -> Result<solvecraft_doc::PlaneRef> {
|
||
use solvecraft_doc::PlaneRef;
|
||
const WANT: &str = "XY, XZ, YZ, a construction plane name or id, or {origin, normal}";
|
||
let construction = |r: &str| match s.doc.find_feature(r) {
|
||
Some(f) if matches!(f.kind, FeatureKind::ConstructionPlane { .. }) => Ok(PlaneRef::Construction { name: f.name.clone() }),
|
||
Some(f) => Err(bad(cmd, format!("`{}` is not a construction plane (a plane is {WANT})", f.name))),
|
||
None => Err(bad(cmd, format!("no plane `{r}` (a plane is {WANT})"))),
|
||
};
|
||
match v {
|
||
Some(Value::String(n)) if solvecraft_geom::Plane::named(n.trim()).is_some() => Ok(PlaneRef::Origin { name: n.trim().to_ascii_uppercase() }),
|
||
Some(Value::String(n)) => construction(n.trim()),
|
||
Some(Value::Number(id)) => match id.as_u64() {
|
||
Some(id) => construction(&id.to_string()),
|
||
None => Err(bad(cmd, format!("`plane` must be {WANT}"))),
|
||
},
|
||
Some(o @ Value::Object(_)) => {
|
||
let origin = match o.get("origin") {
|
||
None => Vec3::ZERO,
|
||
Some(x) => vec3(x).ok_or_else(|| bad(cmd, "the plane's `origin` must be a point [x, y, z]"))?,
|
||
};
|
||
let pl = match (o.get("x_dir").and_then(vec3), o.get("y_dir").and_then(vec3), o.get("normal").and_then(vec3)) {
|
||
(Some(x), Some(y), _) => solvecraft_geom::Plane::new(origin, x, y),
|
||
(_, _, Some(n)) => solvecraft_geom::Plane::from_normal(origin, n),
|
||
_ => None,
|
||
};
|
||
Ok(PlaneRef::Custom { plane: pl.ok_or_else(|| bad(cmd, "plane needs x_dir and y_dir, or normal"))? })
|
||
}
|
||
_ => Err(bad(cmd, format!("`plane` must be {WANT}"))),
|
||
}
|
||
}
|
||
|
||
fn plane_offset(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "construct.plane.offset";
|
||
let base = plane_param(s, p.get("base"), cmd)?;
|
||
let d = req_expr(cmd, p, "offset")?;
|
||
check_expr(s, &d, Kind::Length, cmd, "offset")?;
|
||
add_feature(s, p, FeatureKind::ConstructionPlane { plane: solvecraft_doc::PlaneRef::Offset { base: Box::new(base), distance: d } })
|
||
}
|
||
|
||
fn plane_angle(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "construct.plane.at_angle";
|
||
let base = plane_param(s, p.get("base"), cmd)?;
|
||
let (axis_origin, axis_dir) = axis_line(p, cmd)?;
|
||
let angle = req_expr(cmd, p, "angle")?;
|
||
check_expr(s, &angle, Kind::Angle, cmd, "angle")?;
|
||
add_feature(
|
||
s,
|
||
p,
|
||
FeatureKind::ConstructionPlane { plane: solvecraft_doc::PlaneRef::AtAngle { base: Box::new(base), axis_origin, axis_dir, angle } },
|
||
)
|
||
}
|
||
|
||
fn split_face(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.split_face";
|
||
let faces = face_points(p, cmd)?;
|
||
let body = str_(p, "body").map(str::to_string);
|
||
let xy = || solvecraft_doc::PlaneRef::Origin { name: "XY".into() };
|
||
let kind = if let Some(t) = p.get("tool").filter(|t| !t.is_null()) {
|
||
let tb = t.get("body").and_then(Value::as_str).ok_or_else(|| bad(cmd, "`tool.body` must name a body"))?.to_string();
|
||
let point = t.get("point").and_then(crate::params::vec3).ok_or_else(|| bad(cmd, "`tool.point` must be [x, y, z] on the tool face"))?;
|
||
FeatureKind::SplitFace { faces, body, plane: xy(), tool: Some(solvecraft_doc::FaceAt { body: tb, point }), sketch: None }
|
||
} else if p.get("sketch").is_some_and(|v| !v.is_null()) {
|
||
let sketch = sketch_id(s, p.get("sketch"), cmd, "sketch")?;
|
||
FeatureKind::SplitFace { faces, body, plane: xy(), tool: None, sketch: Some(sketch) }
|
||
} else {
|
||
let plane = plane_param(s, p.get("plane"), cmd)?;
|
||
FeatureKind::SplitFace { faces, body, plane, tool: None, sketch: None }
|
||
};
|
||
add_feature(s, p, kind)
|
||
}
|
||
|
||
fn split_body(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.split_body";
|
||
let body = str_(p, "body").ok_or_else(|| bad(cmd, "`body` is required"))?.to_string();
|
||
if s.model.state().body(&body).is_none() {
|
||
return Err(bad(cmd, format!("no body `{body}`")));
|
||
}
|
||
// A face as the tool: `tool: {body, point}` (its surface extended); else a plane.
|
||
if let Some(t) = p.get("tool").filter(|t| !t.is_null()) {
|
||
let tb = t.get("body").and_then(Value::as_str).ok_or_else(|| bad(cmd, "`tool.body` must name a body"))?.to_string();
|
||
let point = t.get("point").and_then(crate::params::vec3).ok_or_else(|| bad(cmd, "`tool.point` must be [x, y, z] on the tool face"))?;
|
||
let st = s.model.state();
|
||
let tbody = st.body(&tb).ok_or_else(|| bad(cmd, format!("no body `{tb}`")))?;
|
||
if solvecraft_doc::appearance::face_index_at(tbody, point).is_none() {
|
||
return Err(bad(cmd, "`tool.point` is not on a face of the tool body"));
|
||
}
|
||
return add_feature(
|
||
s,
|
||
p,
|
||
FeatureKind::Split {
|
||
body,
|
||
plane: solvecraft_doc::PlaneRef::Origin { name: "XY".into() },
|
||
tool: Some(solvecraft_doc::FaceAt { body: tb, point }),
|
||
},
|
||
);
|
||
}
|
||
let plane = plane_param(s, p.get("plane"), cmd)?;
|
||
add_feature(s, p, FeatureKind::Split { body, plane, tool: None })
|
||
}
|
||
|
||
/// ISO 273 clearance hole diameters (close, normal, loose fit) for metric bolts.
|
||
fn clearance_diameter(size: &str, fit: &str) -> Option<f64> {
|
||
const TABLE: [(f64, f64, f64, f64); 21] = [
|
||
(1.6, 1.7, 1.8, 2.0),
|
||
(2.0, 2.2, 2.4, 2.6),
|
||
(2.5, 2.7, 2.9, 3.1),
|
||
(3.0, 3.2, 3.4, 3.6),
|
||
(4.0, 4.3, 4.5, 4.8),
|
||
(5.0, 5.3, 5.5, 5.8),
|
||
(6.0, 6.4, 6.6, 7.0),
|
||
(8.0, 8.4, 9.0, 10.0),
|
||
(10.0, 10.5, 11.0, 12.0),
|
||
(12.0, 13.0, 13.5, 14.5),
|
||
(14.0, 15.0, 15.5, 16.5),
|
||
(16.0, 17.0, 17.5, 18.5),
|
||
(20.0, 21.0, 22.0, 24.0),
|
||
(24.0, 25.0, 26.0, 28.0),
|
||
(30.0, 31.0, 33.0, 35.0),
|
||
(36.0, 37.0, 39.0, 42.0),
|
||
(42.0, 43.0, 45.0, 48.0),
|
||
(48.0, 50.0, 52.0, 56.0),
|
||
(56.0, 58.0, 62.0, 66.0),
|
||
(60.0, 62.0, 66.0, 70.0),
|
||
(64.0, 66.0, 70.0, 74.0),
|
||
];
|
||
let t = size.trim().trim_start_matches(['M', 'm']);
|
||
let d: f64 = t.split(['x', 'X']).next()?.trim().parse().ok()?;
|
||
let row = TABLE.iter().find(|r| (r.0 - d).abs() < 1e-9)?;
|
||
match fit {
|
||
"close" | "fine" => Some(row.1),
|
||
"normal" | "medium" => Some(row.2),
|
||
"loose" | "coarse" => Some(row.3),
|
||
_ => None,
|
||
}
|
||
}
|
||
|
||
fn hole(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.hole";
|
||
// At sketch points: the holes go perpendicular to the sketch and follow its points.
|
||
let points = match (p.get("sketch"), p.get("points"), p.get("position")) {
|
||
(Some(_), Some(_), _) | (Some(_), None, None) => {
|
||
let sketch = feature_sketch(s, p, cmd)?;
|
||
// No points named: every sketch point (standalone points and circle centres, not
|
||
// line or arc ends, not the origin).
|
||
let ids = if p.get("points").is_some() { string_list(p, "points") } else { sketch_hole_points(s, sketch) };
|
||
if ids.is_empty() || ids.len() > 10_000 {
|
||
return Err(bad(cmd, "`points` must list 1…10000 sketch point ids"));
|
||
}
|
||
let st = s.model.state();
|
||
let ss = st.sketch(sketch).ok_or_else(|| bad(cmd, "the sketch is not evaluated"))?;
|
||
for id in &ids {
|
||
if !ss.sketch.points.iter().any(|q| &q.id == id) {
|
||
return Err(bad(cmd, format!("no point `{id}` in the sketch")));
|
||
}
|
||
}
|
||
let n = ss.plane.normal();
|
||
let first =
|
||
ids.first().and_then(|id| ss.sketch.points.iter().find(|q| &q.id == id)).map(|q| ss.plane.to_world(q.pos)).unwrap_or_default();
|
||
Some((solvecraft_doc::SketchPoints { sketch, ids }, first, -n))
|
||
}
|
||
_ => None,
|
||
};
|
||
let thread = str_(p, "thread").map(|t| t.trim().to_string()).filter(|t| !t.is_empty());
|
||
if let Some(t) = &thread
|
||
&& solvecraft_doc::parse_metric_thread(t).is_none()
|
||
{
|
||
return Err(bad(cmd, format!("unknown thread `{t}` (ISO metric, like M6 or M6x0.75)")));
|
||
}
|
||
let position = match (&points, p.get("position").and_then(vec3)) {
|
||
(Some((_, first, _)), None) => *first,
|
||
(_, Some(x)) => x,
|
||
(None, None) => return Err(bad(cmd, "`position` must be [x, y, z] (or give `sketch` and `points`)")),
|
||
};
|
||
let direction = match (p.get("direction").and_then(vec3), &points) {
|
||
(None, Some((_, _, d))) => *d,
|
||
(d, _) => match d {
|
||
Some(d) => d.normalized().ok_or_else(|| bad(cmd, "`direction` must be non-zero"))?,
|
||
None => {
|
||
// Into the planar face the position lies on.
|
||
let st = s.model.state();
|
||
let mut found = None;
|
||
for b in &st.bodies {
|
||
let tol = (b.body.size() * 1e-3).max(1e-3);
|
||
for f in b.body.faces(tol).unwrap_or_default() {
|
||
if let Some(n) = f.plane_normal
|
||
&& (position - f.centroid).dot(n).abs() < tol * 10.0
|
||
{
|
||
found = Some(-n);
|
||
}
|
||
}
|
||
}
|
||
found.ok_or_else(|| bad(cmd, "no planar face at `position`; give `direction`"))?
|
||
}
|
||
},
|
||
};
|
||
// The diameter: given, or the tap drill of the thread (major − pitch), or an ISO 273
|
||
// clearance hole for a bolt size (close, normal or loose fit).
|
||
let diameter = match (expr(p, "diameter"), &thread, str_(p, "clearance")) {
|
||
(Some(d), _, _) => d,
|
||
(None, _, Some(c)) => {
|
||
let fit = str_(p, "fit").unwrap_or("normal").to_ascii_lowercase();
|
||
let d = clearance_diameter(c, &fit).ok_or_else(|| bad(cmd, format!("no clearance hole for `{c}` ({fit} fit): M1.6 to M64")))?;
|
||
format!("{d} mm")
|
||
}
|
||
(None, Some(t), None) => {
|
||
let (major, pitch) = solvecraft_doc::parse_metric_thread(t).ok_or_else(|| bad(cmd, "thread"))?;
|
||
format!("{} mm", ((major - pitch) * 1000.0).round() / 1000.0)
|
||
}
|
||
(None, None, None) => return Err(bad(cmd, "needs `diameter`, `thread` (a tapped hole) or `clearance` (a bolt size)")),
|
||
};
|
||
check_expr(s, &diameter, Kind::Length, cmd, "diameter")?;
|
||
let depth = expr(p, "depth");
|
||
if let Some(d) = &depth {
|
||
check_expr(s, d, Kind::Length, cmd, "depth")?;
|
||
}
|
||
let get = |k: &str| -> Result<String> {
|
||
let e = req_expr(cmd, p, k)?;
|
||
Ok(e)
|
||
};
|
||
let kind = match str_(p, "type").unwrap_or("simple") {
|
||
"simple" => match expr(p, "tip_angle") {
|
||
Some(t) if depth.is_some() => solvecraft_doc::HoleKind::Drilled { tip_angle: t },
|
||
_ => solvecraft_doc::HoleKind::Simple,
|
||
},
|
||
"drilled" => solvecraft_doc::HoleKind::Drilled { tip_angle: expr(p, "tip_angle").unwrap_or_else(|| "118 deg".into()) },
|
||
"counterbore" => solvecraft_doc::HoleKind::Counterbore { cb_diameter: get("cb_diameter")?, cb_depth: get("cb_depth")? },
|
||
"countersink" => solvecraft_doc::HoleKind::Countersink {
|
||
cs_diameter: get("cs_diameter")?,
|
||
cs_angle: expr(p, "cs_angle").unwrap_or_else(|| "90 deg".into()),
|
||
},
|
||
other => return Err(bad(cmd, format!("unknown hole type `{other}`"))),
|
||
};
|
||
let to = match p.get("to") {
|
||
Some(v) => Some(vec3(v).ok_or_else(|| bad(cmd, "`to` must be a point [x, y, z] on the face to drill to"))?),
|
||
None => None,
|
||
};
|
||
add_feature(s, p, FeatureKind::Hole { position, direction, diameter, depth, hole: kind, points: points.map(|x| x.0), thread, to })
|
||
}
|
||
|
||
/// The points of a sketch a hole drills at when only the sketch is given.
|
||
fn sketch_hole_points(s: &Session, sketch: u64) -> Vec<String> {
|
||
let st = s.model.state();
|
||
let Some(ss) = st.sketch(sketch) else { return Vec::new() };
|
||
let mut ends: Vec<usize> = Vec::new();
|
||
for c in &ss.sketch.curves {
|
||
match &c.kind {
|
||
solvecraft_sketch::CurveKind::Circle { .. } => {}
|
||
solvecraft_sketch::CurveKind::Arc { a, b, .. } | solvecraft_sketch::CurveKind::Line { a, b } => ends.extend([*a, *b]),
|
||
solvecraft_sketch::CurveKind::Ellipse { m, .. } => ends.push(*m),
|
||
solvecraft_sketch::CurveKind::Spline { pts, .. } => ends.extend(pts.iter().copied()),
|
||
solvecraft_sketch::CurveKind::Conic { a, b, apex, .. } => ends.extend([*a, *b, *apex]),
|
||
}
|
||
}
|
||
ss.sketch.points.iter().enumerate().filter(|(i, p)| p.id != "origin" && !ends.contains(i)).map(|(_, p)| p.id.clone()).collect()
|
||
}
|
||
|
||
fn face_points(p: &Value, cmd: &str) -> Result<Vec<Vec3>> {
|
||
let a = p.get("faces").and_then(Value::as_array).ok_or_else(|| bad(cmd, "`faces` must be a list of points"))?;
|
||
if a.is_empty() || a.len() > 1000 {
|
||
return Err(bad(cmd, "select 1…1000 faces"));
|
||
}
|
||
a.iter().map(|v| vec3(v).or_else(|| v.get("point").and_then(vec3)).ok_or_else(|| bad(cmd, "a face is a point [x, y, z] on it"))).collect()
|
||
}
|
||
|
||
fn shell(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.shell";
|
||
let faces = face_points(p, cmd)?;
|
||
let thickness = req_expr(cmd, p, "thickness")?;
|
||
check_expr(s, &thickness, Kind::Length, cmd, "thickness")?;
|
||
let direction = str_(p, "direction").map(str::to_ascii_lowercase).unwrap_or_default();
|
||
if !matches!(direction.as_str(), "" | "inside" | "outside" | "both") {
|
||
return Err(bad(cmd, "`direction` must be inside, outside or both"));
|
||
}
|
||
add_feature(
|
||
s,
|
||
p,
|
||
FeatureKind::Shell {
|
||
faces,
|
||
thickness,
|
||
body: str_(p, "body").map(str::to_string),
|
||
direction: if direction == "inside" { String::new() } else { direction },
|
||
tangent_chain: bool_(p, "tangent_chain").unwrap_or(false),
|
||
},
|
||
)
|
||
}
|
||
|
||
fn draft(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.draft";
|
||
let faces = face_points(p, cmd)?;
|
||
let angle = req_expr(cmd, p, "angle")?;
|
||
check_expr(s, &angle, Kind::Angle, cmd, "angle")?;
|
||
let neutral = plane_param(s, p.get("neutral"), cmd)?;
|
||
let (vals, _) = s.doc.param_values();
|
||
let pl = s.doc.resolve_plane_in(&vals, &neutral, 0, Some(&s.model.state()))?;
|
||
let pull = p.get("pull").and_then(vec3).unwrap_or_else(|| pl.normal());
|
||
add_feature(s, p, FeatureKind::Draft { faces, angle, neutral, pull, body: str_(p, "body").map(str::to_string) })
|
||
}
|
||
|
||
pub(super) fn sketch_id(s: &Session, v: Option<&Value>, cmd: &str, what: &str) -> Result<u64> {
|
||
let key = match v {
|
||
Some(Value::Number(n)) => n.to_string(),
|
||
Some(Value::String(x)) => x.clone(),
|
||
_ => return Err(bad(cmd, format!("`{what}` must be a sketch id or name"))),
|
||
};
|
||
match s.doc.find_feature(&key) {
|
||
Some(f) if matches!(f.kind, FeatureKind::Sketch { .. }) => Ok(f.id),
|
||
_ => Err(bad(cmd, format!("no sketch `{key}`"))),
|
||
}
|
||
}
|
||
|
||
fn sweep(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.sweep";
|
||
let sketch = feature_sketch(s, p, cmd)?;
|
||
let path_sketch = sketch_id(s, p.get("path_sketch"), cmd, "path_sketch")?;
|
||
let path = string_list(p, "path");
|
||
if path.is_empty() {
|
||
return Err(bad(cmd, "`path` must list curve ids"));
|
||
}
|
||
add_feature(
|
||
s,
|
||
p,
|
||
FeatureKind::Sweep {
|
||
sketch,
|
||
profiles: profiles(p, cmd)?,
|
||
path_sketch,
|
||
path,
|
||
operation: operation(p, cmd)?,
|
||
targets: string_list(p, "targets"),
|
||
},
|
||
)
|
||
}
|
||
|
||
fn loft(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.loft";
|
||
let list = p.get("sections").and_then(Value::as_array).ok_or_else(|| bad(cmd, "`sections` must be a list"))?;
|
||
if list.len() < 2 || list.len() > 50 {
|
||
return Err(bad(cmd, "a loft needs 2…50 sections"));
|
||
}
|
||
let mut sections = Vec::new();
|
||
for sec in list {
|
||
let sketch = sketch_id(s, sec.get("sketch"), cmd, "sections[].sketch")?;
|
||
// A sketch point closes the loft to an apex.
|
||
if let Some(pt) = str_(sec, "point") {
|
||
let st = s.model.state();
|
||
if !st.sketch(sketch).is_some_and(|ss| ss.sketch.points.iter().any(|q| q.id == pt)) {
|
||
return Err(bad(cmd, format!("no point `{pt}` in the section's sketch")));
|
||
}
|
||
sections.push(solvecraft_doc::LoftSection { sketch, profiles: solvecraft_doc::ProfileSel::All, point: Some(pt.to_string()) });
|
||
continue;
|
||
}
|
||
sections.push(solvecraft_doc::LoftSection { sketch, profiles: profiles(sec, cmd)?, point: None });
|
||
}
|
||
add_feature(s, p, FeatureKind::Loft { sections, operation: operation(p, cmd)?, targets: string_list(p, "targets") })
|
||
}
|
||
|
||
fn thread(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.thread";
|
||
let face = p
|
||
.get("face")
|
||
.and_then(|v| vec3(v).or_else(|| v.get("point").and_then(vec3)))
|
||
.ok_or_else(|| bad(cmd, "`face` must be a point [x, y, z] on a cylindrical face"))?;
|
||
let designation = str_(p, "designation").map(|t| t.trim().to_string()).filter(|t| !t.is_empty());
|
||
if let Some(t) = &designation
|
||
&& solvecraft_doc::parse_metric_thread(t).is_none()
|
||
{
|
||
return Err(bad(cmd, format!("unknown thread `{t}` (ISO metric, like M8 or M8x1)")));
|
||
}
|
||
let length = expr(p, "length");
|
||
if let Some(l) = &length {
|
||
check_expr(s, l, Kind::Length, cmd, "length")?;
|
||
}
|
||
let modeled = p.get("modeled").and_then(Value::as_bool).unwrap_or(false);
|
||
let v = add_feature(s, p, FeatureKind::Thread { face, designation, length, modeled })?;
|
||
let st = s.model.state();
|
||
let t = v.get("feature").and_then(Value::as_u64).and_then(|id| st.threads.iter().find(|t| t.feature == id).cloned());
|
||
Ok(json!({"feature": v.get("feature"), "name": v.get("name"), "thread": t}))
|
||
}
|
||
|
||
fn pipe(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.pipe";
|
||
let path_sketch = sketch_id(s, p.get("path_sketch"), cmd, "path_sketch")?;
|
||
let path = string_list(p, "path");
|
||
if path.is_empty() {
|
||
return Err(bad(cmd, "`path` must list curve ids"));
|
||
}
|
||
let diameter = req_expr(cmd, p, "diameter")?;
|
||
check_expr(s, &diameter, Kind::Length, cmd, "diameter")?;
|
||
let wall = expr(p, "wall");
|
||
if let Some(w) = &wall {
|
||
check_expr(s, w, Kind::Length, cmd, "wall")?;
|
||
}
|
||
add_feature(s, p, FeatureKind::Pipe { path_sketch, path, diameter, wall, operation: operation(p, cmd)?, targets: string_list(p, "targets") })
|
||
}
|
||
|
||
fn bounding_solid(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.bounding_solid";
|
||
let margin = expr(p, "margin").unwrap_or_else(|| "0".into());
|
||
check_expr(s, &margin, Kind::Length, cmd, "margin")?;
|
||
add_feature(s, p, FeatureKind::BoundingSolid { bodies: string_list(p, "bodies"), margin })
|
||
}
|
||
|
||
fn scale(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.scale";
|
||
let bodies = string_list(p, "bodies");
|
||
if bodies.is_empty() {
|
||
return Err(bad(cmd, "`bodies` must list bodies"));
|
||
}
|
||
let factors = match p.get("factors").and_then(Value::as_array) {
|
||
Some(a) if a.len() == 3 => {
|
||
let e: Vec<String> = a.iter().map(|v| v.as_str().map(str::to_string).unwrap_or_else(|| v.to_string())).collect();
|
||
for x in &e {
|
||
check_expr(s, x, Kind::Unitless, cmd, "factors")?;
|
||
}
|
||
Some([e[0].clone(), e[1].clone(), e[2].clone()])
|
||
}
|
||
Some(_) => return Err(bad(cmd, "`factors` must have three values")),
|
||
None => None,
|
||
};
|
||
let factor = match (&factors, expr(p, "factor")) {
|
||
(_, Some(f)) => f,
|
||
(Some(_), None) => "1".into(),
|
||
(None, None) => return Err(bad(cmd, "give `factor` or `factors`")),
|
||
};
|
||
check_expr(s, &factor, Kind::Unitless, cmd, "factor")?;
|
||
let origin = p.get("origin").and_then(vec3).unwrap_or(Vec3::ZERO);
|
||
add_feature(s, p, FeatureKind::Scale { bodies, origin, factor, factors })
|
||
}
|
||
|
||
fn delete_face(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let faces = face_points(p, "face.delete")?;
|
||
add_feature(s, p, FeatureKind::DeleteFace { faces, body: str_(p, "body").map(str::to_string) })
|
||
}
|
||
|
||
fn offset_face(s: &mut Session, p: &Value) -> Result<Value> {
|
||
let cmd = "solid.offset_face";
|
||
let faces = face_points(p, cmd)?;
|
||
let distance = req_expr(cmd, p, "distance")?;
|
||
check_expr(s, &distance, Kind::Length, cmd, "distance")?;
|
||
add_feature(s, p, FeatureKind::OffsetFace { faces, distance, body: str_(p, "body").map(str::to_string) })
|
||
}
|
||
|
||
#[cfg(test)]
|
||
#[path = "patterns_tests.rs"]
|
||
mod patterns_tests;
|