OneCAD/crates/sketch/src/tests.rs

use std::f64::consts::{FRAC_PI_2, PI};

use solidcraft_geom::Vec2;

use crate::*;

pub(crate) fn v(x: f64, y: f64) -> Vec2 {
    Vec2::new(x, y)
}

/// Deterministic pseudo-random numbers for the solver harnesses.
pub(crate) struct Lcg(pub u64);

impl Lcg {
    pub(crate) fn next(&mut self) -> f64 {
        self.0 = self.0.wrapping_mul(6364136223846793005).wrapping_add(1442695040888963407);
        (self.0 >> 11) as f64 / (1u64 << 53) as f64
    }
    pub(crate) fn range(&mut self, lo: f64, hi: f64) -> f64 {
        lo + self.next() * (hi - lo)
    }
    /// ±1, evenly.
    pub(crate) fn sign(&mut self) -> f64 {
        if self.next() < 0.5 { 1.0 } else { -1.0 }
    }
}

/// Run `f` with the constructive seed on or off, without the seed-on/seed-off comparison (for
/// tests that measure the difference).
pub(crate) fn seeded<T>(on: bool, f: impl FnOnce() -> T) -> T {
    use crate::construct::switch;
    switch::without_differential(|| if on { f() } else { switch::without_seed(f) })
}

/// The points that are constants for a plain solve.
pub(crate) fn given(sk: &Sketch) -> Vec<bool> {
    crate::solver::held_points(sk, &Hold::default())
}

/// The constructive seed of a plain solve.
pub(crate) fn seed_of(sk: &Sketch) -> crate::construct::Seed {
    crate::construct::seed(sk, &given(sk), None, &crate::solver::points_on_curves(sk), &mut crate::decompose::Budget::full())
}

/// Rough rectangle from four lines sharing corner points.
fn rect(sk: &mut Sketch, p: [Vec2; 4]) -> [usize; 4] {
    let a = sk.add_point(p[0], None).unwrap();
    let b = sk.add_point(p[1], None).unwrap();
    let c = sk.add_point(p[2], None).unwrap();
    let d = sk.add_point(p[3], None).unwrap();
    [
        sk.add_line_pts(a, b, None).unwrap(),
        sk.add_line_pts(b, c, None).unwrap(),
        sk.add_line_pts(c, d, None).unwrap(),
        sk.add_line_pts(d, a, None).unwrap(),
    ]
}

fn line_pts(sk: &Sketch, l: usize) -> (Vec2, Vec2) {
    match sk.curves[l].kind {
        CurveKind::Line { a, b } => (sk.points[a].pos, sk.points[b].pos),
        _ => panic!(),
    }
}

#[test]
fn fully_constrained_rectangle() {
    let mut sk = Sketch::new();
    let l = rect(&mut sk, [v(0.3, -0.2), v(38.0, 1.0), v(41.0, 29.0), v(-1.0, 31.0)]);
    use ConstraintKind::*;
    sk.add_constraint(Horizontal { l: l[0] }, None).unwrap();
    sk.add_constraint(Horizontal { l: l[2] }, None).unwrap();
    sk.add_constraint(Vertical { l: l[1] }, None).unwrap();
    sk.add_constraint(Vertical { l: l[3] }, None).unwrap();
    let (a, _) = match sk.curves[l[0]].kind {
        CurveKind::Line { a, b } => (a, b),
        _ => panic!(),
    };
    sk.add_constraint(Coincident { p: a, q: 0 }, None).unwrap();
    sk.add_constraint(Length { l: l[0], value: 40.0 }, Some("d1".into())).unwrap();
    sk.add_constraint(Length { l: l[1], value: 30.0 }, Some("d2".into())).unwrap();
    let rep = solve(&mut sk);
    assert!(rep.ok(), "{rep:?}");
    assert_eq!(rep.dof, 0, "{rep:?}");
    assert!(rep.point_determined.iter().all(|d| *d));
    let (p0, p1) = line_pts(&sk, l[0]);
    assert!(p0.dist(v(0.0, 0.0)) < 1e-7, "{p0:?}");
    assert!(p1.dist(v(40.0, 0.0)) < 1e-7, "{p1:?}");
    let (_, p2) = line_pts(&sk, l[1]);
    assert!(p2.dist(v(40.0, 30.0)) < 1e-7, "{p2:?}");
    // Change a dimension and re-solve.
    sk.constraints[5].kind.set_value(55.0);
    assert!(solve(&mut sk).ok());
    let (_, p1) = line_pts(&sk, l[0]);
    assert!(p1.dist(v(55.0, 0.0)) < 1e-7);
}

#[test]
fn under_constrained_reports_dof() {
    let mut sk = Sketch::new();
    let l = sk.add_line(v(0.0, 0.0), v(10.0, 1.0), None, None, None).unwrap();
    sk.add_constraint(ConstraintKind::Horizontal { l }, None).unwrap();
    let rep = solve(&mut sk);
    assert!(rep.ok());
    assert_eq!(rep.dof, 3);
    let (a, b) = line_pts(&sk, l);
    assert!((a.y - b.y).abs() < 1e-9);
    // Minimal movement: the line moved by about half a unit each.
    assert!((a.y - 0.5).abs() < 0.05 && (b.y - 0.5).abs() < 0.05, "{a:?} {b:?}");
}

#[test]
fn conflicting_constraints_fail_and_restore() {
    let mut sk = Sketch::new();
    let l = sk.add_line(v(0.0, 0.0), v(10.0, 0.0), None, None, None).unwrap();
    sk.add_constraint(ConstraintKind::Horizontal { l }, None).unwrap();
    sk.add_constraint(ConstraintKind::Vertical { l }, None).unwrap();
    sk.add_constraint(ConstraintKind::Length { l, value: 10.0 }, None).unwrap();
    let before = sk.clone();
    let rep = solve(&mut sk);
    assert_eq!(rep.status, SolveStatus::Failed);
    assert!(!rep.failing.is_empty());
    assert_eq!(sk.points, before.points);
}

#[test]
fn circles_tangent_equal_concentric() {
    let mut sk = Sketch::new();
    let c1 = sk.add_circle(v(0.0, 0.0), 5.0, Some(0), None).unwrap();
    let c2 = sk.add_circle(v(12.0, 1.0), 3.0, None, None).unwrap();
    use ConstraintKind::*;
    sk.add_constraint(Radius { c: c1, value: 10.0 }, None).unwrap();
    sk.add_constraint(Equal { a: c1, b: c2 }, None).unwrap();
    sk.add_constraint(Tangent { a: c1, b: c2 }, None).unwrap();
    let rep = solve(&mut sk);
    assert!(rep.ok(), "{rep:?}");
    assert!((sk.radius(c2).unwrap() - 10.0).abs() < 1e-7);
    assert!((sk.center(c2).unwrap().len() - 20.0).abs() < 1e-7);
    let c3 = sk.add_circle(v(3.0, 3.0), 2.0, None, None).unwrap();
    sk.add_constraint(Concentric { a: c3, b: c2 }, None).unwrap();
    assert!(solve(&mut sk).ok());
    assert!(sk.center(c3).unwrap().dist(sk.center(c2).unwrap()) < 1e-7);
}

#[test]
fn line_tangent_to_circle_and_angles() {
    let mut sk = Sketch::new();
    let c = sk.add_circle(v(0.0, 0.0), 10.0, Some(0), None).unwrap();
    use ConstraintKind::*;
    sk.add_constraint(Radius { c, value: 10.0 }, None).unwrap();
    let l = sk.add_line(v(-20.0, 12.0), v(20.0, 11.0), None, None, None).unwrap();
    sk.add_constraint(Tangent { a: l, b: c }, None).unwrap();
    sk.add_constraint(Horizontal { l }, None).unwrap();
    assert!(solve(&mut sk).ok());
    let (a, _) = line_pts(&sk, l);
    assert!((a.y.abs() - 10.0).abs() < 1e-7, "{a:?}");
    let m = sk.add_line(v(0.0, 0.0), v(10.0, 3.0), Some(0), None, None).unwrap();
    sk.add_constraint(Angle { a: l, b: m, value: PI / 6.0, flip: false }, None).unwrap();
    sk.add_constraint(Length { l: m, value: 8.0 }, None).unwrap();
    assert!(solve(&mut sk).ok());
    let (p, q) = line_pts(&sk, m);
    let (la, lb) = line_pts(&sk, l);
    assert!(((q - p).angle() - (lb - la).angle() - PI / 6.0).abs() < 1e-7, "{la:?} {lb:?} {p:?} {q:?}");
    let n2 = sk.add_line(v(1.0, 1.0), v(2.0, 5.0), None, None, None).unwrap();
    sk.add_constraint(Perpendicular { a: m, b: n2 }, None).unwrap();
    sk.add_constraint(Parallel { a: n2, b: n2 }, None).unwrap();
    assert!(solve(&mut sk).ok());
    let (p2, q2) = line_pts(&sk, n2);
    assert!(((q2 - p2).angle() - (PI / 6.0 + FRAC_PI_2)).abs() < 1e-6 || ((q2 - p2).angle() - (PI / 6.0 - FRAC_PI_2)).abs() < 1e-6);
}

#[test]
fn midpoint_symmetry_point_on_curve_arc() {
    let mut sk = Sketch::new();
    use ConstraintKind::*;
    let l = sk.add_line(v(-5.0, 0.0), v(5.0, 0.0), None, None, None).unwrap();
    let p = sk.add_point(v(1.0, 1.0), None).unwrap();
    sk.add_constraint(Midpoint { p, l }, None).unwrap();
    let a = sk.add_arc(v(0.0, 0.0), v(4.0, 0.0), v(0.0, 4.0), [None, None, None], None).unwrap();
    sk.add_constraint(Radius { c: a, value: 6.0 }, None).unwrap();
    let q = sk.add_point(v(3.0, 3.0), None).unwrap();
    sk.add_constraint(PointOnCurve { p: q, c: a }, None).unwrap();
    let s1 = sk.add_point(v(-2.0, 1.0), None).unwrap();
    let s2 = sk.add_point(v(3.0, -1.5), None).unwrap();
    let axis = sk.add_line(v(0.0, -10.0), v(0.0, 10.0), None, None, None).unwrap();
    sk.add_constraint(Vertical { l: axis }, None).unwrap();
    sk.add_constraint(Symmetric { p: s1, q: s2, l: axis }, None).unwrap();
    let rep = solve(&mut sk);
    assert!(rep.ok(), "{rep:?}");
    let (la, lb) = line_pts(&sk, l);
    assert!(sk.points[p].pos.dist((la + lb) * 0.5) < 1e-7);
    assert!((sk.radius(a).unwrap() - 6.0).abs() < 1e-7);
    let c = sk.center(a).unwrap();
    assert!((sk.points[q].pos.dist(c) - 6.0).abs() < 1e-7);
    let (ax, _) = line_pts(&sk, axis);
    assert!((sk.points[s1].pos.x + sk.points[s2].pos.x - 2.0 * ax.x).abs() < 1e-7);
    assert!((sk.points[s1].pos.y - sk.points[s2].pos.y).abs() < 1e-7);
}

#[test]
fn profiles_rectangle_with_hole_and_split() {
    let mut sk = Sketch::new();
    rect(&mut sk, [v(0.0, 0.0), v(40.0, 0.0), v(40.0, 30.0), v(0.0, 30.0)]);
    sk.add_circle(v(20.0, 15.0), 5.0, None, None).unwrap();
    let ps = find_profiles(&sk);
    assert_eq!(ps.len(), 2, "{ps:?}");
    let big = ps.iter().find(|p| p.region.holes.len() == 1).unwrap();
    assert!((big.area - (1200.0 - PI * 25.0)).abs() < 1e-6);
    let disc = ps.iter().find(|p| p.region.holes.is_empty()).unwrap();
    assert!((disc.area - PI * 25.0).abs() < 1e-6);
    assert_eq!(big.hole_curves.len(), 1);

    // A line across the rectangle splits it into two regions (with the hole in one).
    let mut sk2 = Sketch::new();
    let l = rect(&mut sk2, [v(0.0, 0.0), v(40.0, 0.0), v(40.0, 30.0), v(0.0, 30.0)]);
    let (b0, _) = line_pts(&sk2, l[0]);
    let _ = b0;
    let pa = sk2.add_point(v(10.0, 0.0), None).unwrap();
    let pb = sk2.add_point(v(10.0, 30.0), None).unwrap();
    // Re-split bottom and top edges at x = 10 by rebuilding the sketch as 7 lines.
    let mut s3 = Sketch::new();
    let pts = [v(0.0, 0.0), v(10.0, 0.0), v(40.0, 0.0), v(40.0, 30.0), v(10.0, 30.0), v(0.0, 30.0)];
    let ids: Vec<usize> = pts.iter().map(|p| s3.add_point(*p, None).unwrap()).collect();
    for i in 0..6 {
        s3.add_line_pts(ids[i], ids[(i + 1) % 6], None).unwrap();
    }
    s3.add_line_pts(ids[1], ids[4], None).unwrap();
    let _ = (pa, pb);
    let ps = find_profiles(&s3);
    assert_eq!(ps.len(), 2);
    let mut areas: Vec<f64> = ps.iter().map(|p| p.area).collect();
    areas.sort_by(f64::total_cmp);
    assert!((areas[0] - 300.0).abs() < 1e-9 && (areas[1] - 900.0).abs() < 1e-9, "{areas:?}");
}

#[test]
fn profile_with_arcs_and_construction_ignored() {
    // Slot: two lines and two half arcs.
    let mut sk = Sketch::new();
    let p = [v(0.0, 0.0), v(20.0, 0.0), v(20.0, 10.0), v(0.0, 10.0)];
    let ids: Vec<usize> = p.iter().map(|q| sk.add_point(*q, None).unwrap()).collect();
    sk.add_line_pts(ids[0], ids[1], None).unwrap();
    sk.add_arc(v(20.0, 5.0), p[1], p[2], [None, Some(ids[1]), Some(ids[2])], None).unwrap();
    sk.add_line_pts(ids[2], ids[3], None).unwrap();
    sk.add_arc(v(0.0, 5.0), p[3], p[0], [None, Some(ids[3]), Some(ids[0])], None).unwrap();
    let c = sk.add_line(v(-5.0, -5.0), v(30.0, 20.0), None, None, None).unwrap();
    sk.curves[c].construction = true;
    let ps = find_profiles(&sk);
    assert_eq!(ps.len(), 1, "{ps:?}");
    assert!((ps[0].area - (200.0 + PI * 25.0)).abs() < 1e-6, "{}", ps[0].area);
    assert_eq!(ps[0].outer_curves.len(), 4);
}

#[test]
fn removal_and_references() {
    let mut sk = Sketch::new();
    let l1 = sk.add_line(v(0.0, 0.0), v(1.0, 0.0), None, None, Some("l1")).unwrap();
    let e = sk.resolve_point("l1.end").unwrap();
    let l2 = sk.add_line(v(1.0, 0.0), v(1.0, 1.0), Some(e), None, Some("l2")).unwrap();
    sk.add_constraint(ConstraintKind::Horizontal { l: l1 }, None).unwrap();
    sk.add_constraint(ConstraintKind::Vertical { l: l2 }, None).unwrap();
    assert!(sk.add_line(v(0.0, 0.0), v(1.0, 0.0), None, None, Some("l1")).is_err());
    sk.remove_curves(&[l1]);
    assert_eq!(sk.curves.len(), 1);
    assert_eq!(sk.constraints.len(), 1);
    assert!(sk.resolve_point("l2.start").is_some());
    assert!(sk.resolve_point("l1.start").is_none());
    assert_eq!(sk.points.len(), 3, "origin + l2's two points");
    assert!(solve(&mut sk).ok());
    let json = serde_json::to_string(&sk).unwrap();
    let back: Sketch = serde_json::from_str(&json).unwrap();
    assert_eq!(back, sk);
}

#[test]
fn hostile_values_rejected() {
    let mut sk = Sketch::new();
    assert!(sk.add_point(v(f64::NAN, 0.0), None).is_err());
    assert!(sk.add_circle(v(0.0, 0.0), -1.0, None, None).is_err());
    assert!(sk.add_circle(v(0.0, 0.0), f64::INFINITY, None, None).is_err());
    assert!(sk.add_constraint(ConstraintKind::Horizontal { l: 99 }, None).is_err());
    let c = sk.add_circle(v(0.0, 0.0), 1.0, None, None).unwrap();
    assert!(sk.add_constraint(ConstraintKind::Horizontal { l: c }, None).is_err());
    assert!(sk.add_constraint(ConstraintKind::Radius { c, value: f64::NAN }, None).is_err());
    assert!(sk.add_constraint(ConstraintKind::Radius { c, value: -2.0 }, None).is_err());
}

#[test]
fn profiles_split_at_crossings_and_touch_points() {
    // A line across a circle: two half discs.
    let mut sk = Sketch::new();
    sk.add_circle(v(0.0, 0.0), 10.0, None, None).unwrap();
    sk.add_line(v(-15.0, 0.0), v(15.0, 0.0), None, None, None).unwrap();
    let ps = find_profiles(&sk);
    assert_eq!(ps.len(), 2, "{ps:?}");
    for p in &ps {
        assert!((p.area - PI * 50.0).abs() < 1e-6, "{}", p.area);
    }
    // Belt: two circles joined by two tangent lines whose ends sit on the circles.
    let mut b = Sketch::new();
    let c1 = b.add_circle(v(0.0, 0.0), 20.0, Some(0), None).unwrap();
    let c2 = b.add_circle(v(50.0, 0.0), 10.0, None, None).unwrap();
    let l1 = b.add_line(v(3.0, 19.0), v(47.0, 13.0), None, None, None).unwrap();
    let l2 = b.add_line(v(1.0, -22.0), v(44.0, -8.0), None, None, None).unwrap();
    use ConstraintKind::*;
    for (l, end, c) in [(l1, "start", c1), (l1, "end", c2), (l2, "start", c1), (l2, "end", c2)] {
        let p = b.resolve_point(&format!("{}.{end}", b.curves[l].id)).unwrap();
        b.add_constraint(PointOnCurve { p, c }, None).unwrap();
    }
    for (l, c) in [(l1, c1), (l1, c2), (l2, c1), (l2, c2)] {
        b.add_constraint(Tangent { a: l, b: c }, None).unwrap();
    }
    b.add_constraint(Radius { c: c1, value: 20.0 }, None).unwrap();
    b.add_constraint(Radius { c: c2, value: 10.0 }, None).unwrap();
    let r = solve(&mut b);
    assert!(r.ok(), "{r:?}");
    let ps = find_profiles(&b);
    assert_eq!(ps.len(), 3, "two discs and the band between them: {:?}", ps.iter().map(|p| p.area).collect::<Vec<_>>());
    let total: f64 = ps.iter().map(|p| p.area).sum();
    assert!(total > PI * 500.0, "{total}");
}

#[test]
fn merging_adjacent_regions() {
    let a =
        solidcraft_geom::Region2 { outer: solidcraft_geom::Loop2::polygon(&[v(0.0, 0.0), v(10.0, 0.0), v(10.0, 10.0), v(0.0, 10.0)]), holes: vec![] };
    let b = solidcraft_geom::Region2 {
        outer: solidcraft_geom::Loop2::polygon(&[v(10.0, 0.0), v(20.0, 0.0), v(20.0, 10.0), v(10.0, 10.0)]),
        holes: vec![],
    };
    let c = solidcraft_geom::Region2 { outer: solidcraft_geom::Loop2::polygon(&[v(50.0, 0.0), v(60.0, 0.0), v(60.0, 10.0)]), holes: vec![] };
    let m = merge_regions(&[a, b, c]);
    assert_eq!(m.len(), 2);
    let mut areas: Vec<f64> = m.iter().map(|r| r.area()).collect();
    areas.sort_by(f64::total_cmp);
    assert!((areas[0] - 50.0).abs() < 1e-9 && (areas[1] - 200.0).abs() < 1e-9, "{areas:?}");
    // The two squares make one rectangle: the outline isn't left split where the shared edge was.
    let sides = m.iter().map(|r| r.outer.segs.len()).collect::<Vec<_>>();
    assert!(sides.contains(&4) && sides.contains(&3), "{sides:?}");
}

/// A sketch holding `text` the way `sketch.text` makes it: one text link of the built-in font's
/// outlines.
fn text_sketch(text: &str, at: Vec2, height: f64) -> Sketch {
    let mut sk = Sketch::new();
    let source = LinkSource::Text { text: text.into(), at, height, angle: 0.0, font: None };
    sk.add_link(LinkKind::Text, source, &text_geometry(text, at, height, 0.0).unwrap()).unwrap();
    sk
}

fn sorted_areas(ps: &[Profile]) -> Vec<f64> {
    let mut a: Vec<f64> = ps.iter().map(|p| p.area).collect();
    a.sort_by(f64::total_cmp);
    a
}

fn assert_areas(got: &[f64], mut want: Vec<f64>) {
    want.sort_by(f64::total_cmp);
    assert_eq!(got.len(), want.len(), "{got:?} against {want:?}");
    for (g, w) in got.iter().zip(&want) {
        assert!((g - w).abs() < 2e-3, "{got:?} against {want:?}");
    }
}

#[test]
fn text_counters_are_holes_of_their_letters_not_profiles_of_their_own() {
    // Areas in mm² at a capital height of 10 mm, summed from the Liberation Sans contours (shoelace
    // formula, quadratic pieces flattened finely): a glyph's outer contour, then its counters.
    //   O: 83.3133 - 47.4584   A: 39.2159 - 9.0647   B: 68.9283 - 12.9336 - 16.6277
    //   8: 56.8394 - 10.6451 - 13.7347
    let (o, o_counter) = (83.3133 - 47.4584, 47.4584);
    let (a, a_counter) = (39.2159 - 9.0647, 9.0647);
    let (b, b_counters) = (68.9283 - 12.9336 - 16.6277, [12.9336, 16.6277]);
    let (eight, eight_counters) = (56.8394 - 10.6451 - 13.7347, [10.6451, 13.7347]);
    let check = |text: &str, letters: Vec<f64>, counters: Vec<f64>| {
        let sk = text_sketch(text, Vec2::ZERO, 10.0);
        let all = find_drawn_profiles(&sk);
        // Every counter is a closed region of its own, next to its letter with the hole in it...
        assert_areas(&sorted_areas(&all), letters.iter().chain(&counters).copied().collect());
        // ...and "all profiles" of text means the letters.
        assert_areas(&sorted_areas(&without_text_counters(&sk, all)), letters);
    };
    check("O", vec![o], vec![o_counter]);
    check("8", vec![eight], eight_counters.to_vec());
    check("AB", vec![a, b], [vec![a_counter], b_counters.to_vec()].concat());
    // A letter without a counter is untouched.
    check("I", vec![13.5557], vec![]);
}

#[test]
fn text_beside_other_curves_is_drawn_geometry() {
    // A 30 x 20 rectangle with an "I" (a 10 mm tall bar, 13.5557 mm² in Liberation Sans) beside it.
    let mut sk = text_sketch("I", v(40.0, 0.0), 10.0);
    for (p, q) in [((0.0, 0.0), (30.0, 0.0)), ((30.0, 0.0), (30.0, 20.0)), ((30.0, 20.0), (0.0, 20.0)), ((0.0, 20.0), (0.0, 0.0))] {
        sk.add_line(v(p.0, p.1), v(q.0, q.1), None, None, None).unwrap();
    }
    assert_areas(&sorted_areas(&find_drawn_profiles(&sk)), vec![13.5557, 600.0]);
    // Projected reference geometry still doesn't count as drawn.
    let square = |s: f64| {
        vec![
            LinkGeom::Line(v(100.0, 0.0), v(100.0 + s, 0.0)),
            LinkGeom::Line(v(100.0 + s, 0.0), v(100.0 + s, s)),
            LinkGeom::Line(v(100.0 + s, s), v(100.0, s)),
            LinkGeom::Line(v(100.0, s), v(100.0, 0.0)),
        ]
    };
    sk.add_link(LinkKind::Project, LinkSource::Origin, &square(5.0)).unwrap();
    assert_eq!(find_profiles(&sk).len(), 3);
    assert_areas(&sorted_areas(&find_drawn_profiles(&sk)), vec![13.5557, 600.0]);
}

#[test]
fn a_letter_merged_with_its_counter_is_the_filled_letter() {
    // The ring of an O and its counter share the counter's two conics; merged, they cancel along it.
    let sk = text_sketch("O", Vec2::ZERO, 10.0);
    let regions: Vec<_> = find_profiles(&sk).into_iter().map(|p| p.region).collect();
    assert_eq!(regions.len(), 2);
    let merged = merge_regions(&regions);
    assert_eq!(merged.len(), 1, "{} regions", merged.len());
    assert!(merged[0].holes.is_empty(), "{} holes", merged[0].holes.len());
    assert!((merged[0].area() - 83.3133).abs() < 2e-3, "{}", merged[0].area());
}

#[test]
fn links_update_in_place_rebuild_and_break() {
    use crate::{LinkGeom, LinkKind, LinkSource};
    let mut sk = Sketch::new();
    let src = LinkSource::Origin;
    let sq = |s: f64| {
        vec![
            LinkGeom::Line(v(0.0, 0.0), v(s, 0.0)),
            LinkGeom::Line(v(s, 0.0), v(s, s)),
            LinkGeom::Line(v(s, s), v(0.0, s)),
            LinkGeom::Line(v(0.0, s), v(0.0, 0.0)),
        ]
    };
    let j = sk.add_link(LinkKind::Project, src, &sq(10.0)).unwrap();
    assert_eq!(sk.link_curves(&j).len(), 4);
    // Corners are shared: 4 points, all fixed.
    let pts = sk.link_points(&j);
    assert_eq!(pts.len(), 4);
    assert!(pts.iter().all(|p| sk.points[*p].fixed));
    // A free line dimensioned to a projected corner keeps its constraint across an update.
    let l = sk.add_line(v(3.0, 3.0), v(5.0, 7.0), None, None, None).unwrap();
    let (la, _) = match sk.curves[l].kind {
        CurveKind::Line { a, b } => (a, b),
        _ => panic!(),
    };
    sk.add_constraint(ConstraintKind::Coincident { p: la, q: pts[2] }, None).unwrap();
    let ids: Vec<String> = sk.link_curves(&j).iter().map(|c| sk.curves[*c].id.clone()).collect();
    assert!(!sk.update_link(&j, &sq(20.0)).unwrap(), "same shape updates in place");
    let ids2: Vec<String> = sk.link_curves(&j).iter().map(|c| sk.curves[*c].id.clone()).collect();
    assert_eq!(ids, ids2);
    assert!(solve(&mut sk).ok());
    assert!(sk.points[la].pos.dist(v(20.0, 20.0)) < 1e-9);
    assert_eq!(find_profiles(&sk).len(), 1);
    // A different shape rebuilds (the coincidence on the old corner goes).
    assert!(sk.update_link(&j, &[LinkGeom::Circle(v(1.0, 1.0), 4.0)]).unwrap());
    assert_eq!(sk.link_curves(&j).len(), 1);
    assert_eq!(sk.constraints.len(), 0);
    // Linked circles keep their radius in the solver.
    let c = sk.link_curves(&j)[0];
    let rep = solve(&mut sk);
    assert!(rep.curve_determined[c], "{rep:?}");
    // Breaking the link frees it.
    sk.break_link(&j).unwrap();
    assert!(sk.links.is_empty());
    assert!(sk.curves[c].link.is_none());
    let rep = solve(&mut sk);
    assert!(!rep.curve_determined[c]);
    // Deleting all of a link's curves removes the link.
    let j2 = sk.add_link(LinkKind::Project, LinkSource::Origin, &[LinkGeom::Line(v(0.0, 0.0), v(1.0, 0.0))]).unwrap();
    let cs = sk.link_curves(&j2);
    sk.remove_curves(&cs);
    assert!(sk.link(&j2).is_none());
    // Nothing to project is an error, not an empty link.
    assert!(sk.add_link(LinkKind::Project, LinkSource::Origin, &[LinkGeom::Line(v(0.0, 0.0), v(0.0, 0.0))]).is_err());
    // Round trip through JSON.
    let j3 = sk.add_link(LinkKind::Intersect, LinkSource::Axis { name: "X".into() }, &[LinkGeom::Point(v(2.0, 2.0))]).unwrap();
    let back: Sketch = serde_json::from_str(&serde_json::to_string(&sk).unwrap()).unwrap();
    assert_eq!(back, sk);
    assert_eq!(back.link(&j3).unwrap().kind, LinkKind::Intersect);
}

/// Many independent constrained rectangles solve quickly (per-component work).
#[test]
fn large_sketch_solves_fast() {
    let mut sk = Sketch::new();
    for i in 0..150 {
        let o = v(i as f64 * 50.0, 0.0);
        let l = rect(&mut sk, [o, o + v(40.0, 0.5), o + v(40.5, 30.0), o + v(-0.3, 30.2)]);
        use ConstraintKind::*;
        sk.add_constraint(Horizontal { l: l[0] }, None).unwrap();
        sk.add_constraint(Horizontal { l: l[2] }, None).unwrap();
        sk.add_constraint(Vertical { l: l[1] }, None).unwrap();
        sk.add_constraint(Vertical { l: l[3] }, None).unwrap();
        sk.add_constraint(Length { l: l[0], value: 40.0 }, None).unwrap();
        sk.add_constraint(Length { l: l[1], value: 30.0 }, None).unwrap();
    }
    let t = std::time::Instant::now();
    let rep = solve(&mut sk);
    let ms = t.elapsed().as_millis();
    assert!(rep.ok());
    assert_eq!(rep.dof, 300);
    assert!(ms < 10_000, "{ms} ms");
    eprintln!("large sketch: {ms} ms");
}

#[test]
fn long_connected_chain_solves() {
    let mut sk = Sketch::new();
    let n = 300;
    let mut prev = 0usize;
    for i in 0..n {
        let p = sk.add_point(v((i + 1) as f64 * 10.0 + 0.3, if i % 2 == 0 { 0.4 } else { -0.2 }), None).unwrap();
        let l = sk.add_line_pts(prev, p, None).unwrap();
        sk.add_constraint(ConstraintKind::Horizontal { l }, None).unwrap();
        sk.add_constraint(ConstraintKind::Length { l, value: 10.0 }, None).unwrap();
        prev = p;
    }
    let t = std::time::Instant::now();
    let rep = solve(&mut sk);
    let ms = t.elapsed().as_millis();
    eprintln!("chain: {ms} ms, iters {}", rep.iterations);
    assert!(rep.ok(), "{rep:?}");
    assert_eq!(rep.dof, 0);
    assert!(ms < 10_000, "{ms} ms");
}

/// Free-form curves stay exact in profiles: a degree-5 spline closed by a line, and a fit spline
/// cut in two by a line through it (each side gets an exact sub-curve ending on the line).
#[test]
fn exact_profiles_for_high_degree_and_cut_free_form_curves() {
    use solidcraft_geom::Seg2;
    let exact_loop = |p: &Profile| p.region.outer.segs.iter().all(|s| !matches!(s, Seg2::Line { .. }) || s.length() > 1.0);
    let closed = |p: &Profile| {
        let s = &p.region.outer.segs;
        s.iter().zip(s.iter().cycle().skip(1)).all(|(a, b)| a.end().dist(b.start()) < 1e-9)
    };
    // Degree 5 over six points, closed by a line.
    let mut sk = Sketch::default();
    let ids: Vec<usize> = [v(0.0, 0.0), v(4.0, 10.0), v(10.0, 12.0), v(16.0, 12.0), v(22.0, 10.0), v(26.0, 0.0)]
        .iter()
        .map(|p| sk.add_point(*p, None).unwrap())
        .collect();
    sk.add_curve(CurveKind::Spline { pts: ids.clone(), control: true, degree: 5, periodic: false }, None).unwrap();
    sk.add_line_pts(ids[5], ids[0], None).unwrap();
    let pr = find_profiles(&sk);
    assert_eq!(pr.len(), 1);
    assert!(pr[0].region.outer.segs.iter().any(|s| matches!(s, Seg2::Bezier { n: 5, .. })), "{:?}", pr[0].region.outer.segs);
    assert!(closed(&pr[0]));
    // A fit spline arch over a base line, cut by a vertical line at x = 10.
    let mut sk = Sketch::default();
    let ids: Vec<usize> = [v(0.0, 0.0), v(6.0, 9.0), v(14.0, 9.0), v(20.0, 0.0)].iter().map(|p| sk.add_point(*p, None).unwrap()).collect();
    sk.add_curve(CurveKind::Spline { pts: ids.clone(), control: false, degree: 3, periodic: false }, None).unwrap();
    sk.add_line_pts(ids[3], ids[0], None).unwrap();
    let (a, b) = (sk.add_point(v(10.0, -5.0), None).unwrap(), sk.add_point(v(10.0, 20.0), None).unwrap());
    sk.add_line_pts(a, b, None).unwrap();
    let pr = find_profiles(&sk);
    assert_eq!(pr.len(), 2, "{pr:?}");
    let whole: f64 = pr.iter().map(|p| p.area).sum();
    for p in &pr {
        assert!(closed(p), "{:?}", p.region.outer.segs);
        assert!(exact_loop(p), "polyline pieces left: {:?}", p.region.outer.segs);
        // The crossing lies on the line x = 10.
        assert!(
            p.region
                .outer
                .segs
                .iter()
                .any(|s| matches!(s, Seg2::Cubic { .. }) && ((s.start().x - 10.0).abs() < 1e-9 || (s.end().x - 10.0).abs() < 1e-9))
        );
    }
    // Same total area as the uncut arch.
    sk.curves.pop();
    let uncut: f64 = find_profiles(&sk).iter().map(|p| p.area).sum();
    assert!((whole - uncut).abs() < 1e-6 * uncut, "{whole} vs {uncut}");
}