CypherNaugh_0x c67ad22129 A sketch fillet keeps the dimensions of the corner it rounds: filleting the corner of a spout (a vertical riser and a horizontal top, the top's length dimensioned to the corner and the corner's height from the origin) dropped the height dimension with the corner point and left the length on the shortened straight part, so the top came out a fillet radius too long. Like Fusion, a corner that dimensions or constraints measure to now stays as a virtual sharp corner, a free point held on both curves' extensions (two point-on-curve constraints), with those dimensions kept and a line length to the corner turned into a distance from the line's far end to it; chamfers do the same. sketch.fillet and the chamfers report virtual_corners and moved_to_virtual_corner, and the viewport draws a virtual corner as an open square with dashed extension lines from the curves. Tests: the spout keeps its 80 x 100 size and both dimensions still drive it, the virtual corner survives save/load and undo/redo, a fillet with nothing on its corner leaves no point behind, and nearly straight or folded corners with dimensions never panic

2026-10-11 12:23:22 +02:00

..

curves.rs

Exact free-form profiles: geom Seg2 gains cubic Béziers and conics (rational quadratics: exact length, area, split, tangents); sketch ellipses, conics, text, fit splines and control splines up to degree 3 enter profiles as exact segments wherever a loop uses a whole segment, and the kernel builds them as B-spline / NURBS edges (an extruded ellipse is three faces with the exact volume)

2026-10-08 02:16:00 +00:00

dims.rs

Sketch dimensions drawn as dimensions: extension lines, dimension lines and arcs with arrowheads (flipped outside when tight), the value centred on the line (fx: for expressions), R/Ø leaders, angle arcs, arc-length mark, driven ones in parentheses in a muted colour; click selects, Delete removes, drag moves the text (sketch.dimension_text, kept relative to the dimension), double-click edits the value in place with parameter completion

2026-10-08 04:44:24 +00:00

lib.rs

Merge origin/main (with #86): sketch.dimension reports the solved value in the dimension's unit; the spout test expects the solved 30 and 60 degrees

2026-10-11 00:13:51 +02:00

linalg.rs

M0: workspace, geometry foundation, sketch constraint solver, kernel boundary

2026-10-07 17:01:29 +00:00

link.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

model.rs

A sketch fillet keeps the dimensions of the corner it rounds: filleting the corner of a spout (a vertical riser and a horizontal top, the top's length dimensioned to the corner and the corner's height from the origin) dropped the height dimension with the corner point and left the length on the shortened straight part, so the top came out a fillet radius too long. Like Fusion, a corner that dimensions or constraints measure to now stays as a virtual sharp corner, a free point held on both curves' extensions (two point-on-curve constraints), with those dimensions kept and a line length to the corner turned into a distance from the line's far end to it; chamfers do the same. sketch.fillet and the chamfers report virtual_corners and moved_to_virtual_corner, and the viewport draws a virtual corner as an open square with dashed extension lines from the curves. Tests: the spout keeps its 80 x 100 size and both dimensions still drive it, the virtual corner survives save/load and undo/redo, a fillet with nothing on its corner leaves no point behind, and nearly straight or folded corners with dimensions never panic

2026-10-11 12:23:22 +02:00

offset.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

profiles.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

shape.rs

Exact free-form profiles: geom Seg2 gains cubic Béziers and conics (rational quadratics: exact length, area, split, tangents); sketch ellipses, conics, text, fit splines and control splines up to degree 3 enter profiles as exact segments wherever a loop uses a whole segment, and the kernel builds them as B-spline / NURBS edges (an extruded ellipse is three faces with the exact volume)

2026-10-08 02:16:00 +00:00

solver.rs

sketch.dimension reports measured on the solved sketch: it reported the value the geometry had before the new dimension was solved, so dimensioning a 99.84 mm trough line to 100 answered measured: 99.84 and looked like the dimension had not taken. The command now measures the new dimension again once the sketch is solved (driven dimensions too), through a new solvecraft_sketch::measure_dimension that shares the solver's own measuring. Tests: lengths, a driven distance and a diameter report their solved values

2026-10-11 00:01:19 +02:00

tests.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

text.rs

Fix viewport input leaking through dialogs

2026-10-10 17:34:14 -04:00

wire.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00