1b-agent/solidcraft-upstream
1
0 Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Booleans: small tools in large bodies are traced at their own scale (#559) (#946)

Browse Source 
A through-all hole's tool is twice the largest body long, and the boolean's tolerances
followed that length: a 6 mm hole through a 920 mm part was traced at nearly 1 mm, wider than
the hole, and the cut came out empty or failed. When every other strategy has failed, the
boolean is now asked again (unshifted, then once shifted) at tolerances scaled to where the
bodies meet: the overlap of their boxes and the thinner operand's thickness. Its result is
checked as the others are and held to the retry guard. It runs last, so whatever an earlier
strategy answered is kept as it was, and only for single-shell operands (bodies in several
pieces are retried a piece at a time, each with this pass of its own).

The sampled shortcut also gave up on a slender tool lying across its box (a long hole drilled at
an angle fills little of it): it now samples past the first 2000 points until enough land
inside, so a tool that misses a body leaves that body as it is. Bodies that had enough samples
in the first 2000 are sampled exactly as before.

Baseline: the 90 actions that newly pass, rechecked one by one with the final build.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
This commit is contained in:
bherbruckandClaude Opus 5.5 authored and GitHub committed 2026-10-13 21:54:09 -04:00
1 parent 17db109c5d
commit 78d9aa0153
3 files changed
+169 -89
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

tests/action_matrix/baseline.json
+88 -88
View File
@@ -200,7 +200,7 @@
"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -209,7 +209,7 @@
"Lid/F10:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:-y|F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -219,7 +219,7 @@
"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:side:l6#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -228,7 +228,7 @@
"Lid/F11:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:-y|F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -387,15 +387,15 @@
"Lid/F6:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F7:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F7:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
@@ -404,7 +404,7 @@
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/body": "body.copy body.mirror body.move body.pattern",
"Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",
@@ -718,7 +718,7 @@
"Body2/F3:-z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:side#1": "curved.axis curved.tangent_plane",
"Body2/F4:side#2": "curved.axis curved.tangent_plane",
"Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.move body.pattern",
"Body2/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point",
@@ -846,7 +846,7 @@
"Body1/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -891,20 +891,20 @@
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:inner:F1:+z": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:hole:base": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:inner:F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:hole:base|F4:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:base|F4:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:side:0": "curved.axis curved.tangent_plane",
@@ -915,7 +915,7 @@
"Body1/F4:post:side:0|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:side:1": "curved.axis curved.tangent_plane",
"Body1/F4:post:side:1|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:top": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:rest:side:0": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:0|F5:rest:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:0|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -923,7 +923,7 @@
"Body1/F5:rest:side:1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:1|F5:rest:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:1|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:2": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:2|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:2|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
@@ -940,8 +940,8 @@
"Body1/F5:rest:side:6|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:7": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:7|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:top": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F6:arm:base": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:rest:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F6:arm:base": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:base|F6:arm:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -950,18 +950,18 @@
"Body1/F6:arm:side:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:1|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:1|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:2|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:2|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:3|F6:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:3|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:4|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:4|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:5|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
@@ -1297,7 +1297,7 @@
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
@@ -1498,11 +1498,11 @@
"Enclosure/F6:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F6:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:hole:base|F7:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F7:hole:base|F7:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
@@ -1668,7 +1668,7 @@
"Body1/F11:side:l5|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F11:side:l5|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l6|F11:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -1678,7 +1678,7 @@
"Body1/F11:side:l7|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l7|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F11:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l8|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F11:side:l8|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F11:side:l8|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -2654,7 +2654,7 @@
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:top": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F11:top": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:103": "curved.axis curved.tangent_plane",
"Case/F12:face:103|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:104": "curved.axis curved.tangent_plane",
@@ -2679,7 +2679,7 @@
"Case/F12:face:113|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F12:face:114": "curved.axis curved.tangent_plane",
"Case/F12:face:114|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:147": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:147": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:148": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:149": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
"Case/F12:face:28": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
@@ -4888,7 +4888,7 @@
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
@@ -5542,7 +5542,7 @@
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:top": "face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F4:top|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:top|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F6:side:c1#1": "curved.axis curved.tangent_plane",
@@ -9529,7 +9529,7 @@
"Slat/F2:side:a1|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9539,11 +9539,11 @@
"Slat/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Slat/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F4:side:c1#2": "curved.axis curved.tangent_plane",
@@ -9709,7 +9709,7 @@
"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9718,7 +9718,7 @@
"Lid/F10:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9728,7 +9728,7 @@
"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9737,7 +9737,7 @@
"Lid/F11:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9896,15 +9896,15 @@
"Lid/F6:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
@@ -9913,7 +9913,7 @@
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/body": "body.copy body.mirror body.move body.pattern",
"Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",
@@ -10022,31 +10022,31 @@
"design": "load"
},
"regressions/loft_cut_beside_round_hole": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -10055,32 +10055,32 @@
"Body1/F4:bottom|F9:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F9:end": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:end|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F9:side:l1": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l1|F9:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l1|F9:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l2": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l2|F9:side:l3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l3|F9:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l4": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
@@ -10118,17 +10118,17 @@
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
@@ -10187,11 +10187,11 @@
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
@@ -10223,7 +10223,7 @@
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
@@ -10234,7 +10234,7 @@
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tool/body": "body.copy body.mirror body.move body.pattern",
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
@@ -10500,31 +10500,31 @@
"design": "load"
},
"regressions/shallow_loft_cut_from_top_face": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F5:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -10535,19 +10535,19 @@
"Body1/F2:top|F5:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F5:end": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:end|F5:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F5:side:l1": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l1|F5:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l2": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l2|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l3|F5:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l4": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
@@ -10770,20 +10770,20 @@
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:bore:side:1|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base": "face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:cbore:base": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]": "face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base|F3:cbore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
@@ -10800,14 +10800,14 @@
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l2|F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l3|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",