Fork Build tests jobs were hitting the 45-minute limit while uploading their archive, after
the build had finished, and every one had to start over.
Co-authored-by: Claude Opus 5.5 <[email protected]>
The trusted runs' test archive is still built on GitHub's ubuntu-24.04
runners; minisforum's newer glibc runs it unchanged, so shards 3-4 can join
1-2 on the self-hosted runners.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Fork pull requests now run on the untrusted self-hosted runners, which start
every job empty. Let them restore main's rust-cache like GitHub's runners do
(save-if stays main only, so a fork job never writes a cache).
Co-authored-by: Claude Opus 5.5 <[email protected]>
Lists and Packaging lint each took their own runner slot on every PR push. The list checks now run
in the existing checks job; Lists stays on main. Packaging lint skips PRs that only touch icons.
Co-authored-by: Claude Opus 5.5 <[email protected]>
With Windows off pull requests, GitHub's 20 runners sat idle while every
fork job queued for the self-hosted pool. Select checks, repository
checks, Clippy, doc tests and the summary go back to GitHub's runners;
Build tests and the test shards stay on the isolated self-hosted pool.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pull requests now run the repository checks, Clippy, the affected
crates' tests in 2 shards, and the doc tests. Windows, the reference
tests and the robustness goldens run on pushes to main and in the
nightly, where a break is fixed forward. This is the split Bevy, Zed
and Ruff use, and it cuts each pull request's CI to about a third.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Blacksmith isn't provisioning runners: its dashboard says the account
"requires additional verification", so every job labelled blacksmith-*
stays queued with no runner. Fork PRs' Linux jobs go back to the
self-hosted-untrusted pool (#2249/#2252) and the rest to GitHub's runners
until Blacksmith verifies the account; then #2237 can be re-applied.
This reverts commit dc40f051b1.
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Fork pull requests, the nightly run, Run workflow, the test archive and
test shards 3-4 move from ubuntu-24.04 to blacksmith-<N>vcpu-ubuntu-2404
(16 vCPU for Clippy and the test archive, 8 for test shards, doc tests,
reference tests and cross-compiles). Trusted runs keep the self-hosted
routing. Blacksmith runners count as self-hosted to GitHub, so steps now
tell our own machines apart by runner name.
TEMPORARY: this branch routes its own run like a fork pull request.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: jyviko <[email protected]>
Every fork run waited in GitHub's shared queue just to start. The gate
and summary jobs now run on the isolated runners as well; the local
output stays false for forks so later jobs never pick the trusted pool.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Fork PRs were waiting hours for GitHub's shared runners. Their Linux
jobs (checks, Clippy, Build tests, the test shards, Doc tests, Reference
tests) now run on the ephemeral, network-jailed self-hosted-untrusted
runners, without the trusted runners' warm build directories.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pull requests from branches of this repository share the work with the self-hosted runners like main does; fork pull requests stay on GitHub's runners. Select checks and ci run on a light self-hosted runner; the repository checks, Clippy, doc tests, reference tests and test shards 1-2 on the fast ones. The test archive is still built on GitHub's runners (glibc).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The merge queue runs the full suite on exactly the commit it then puts on
main, and main's push run then ran the full suite again on the same files.
Select checks now asks the Actions API whether a passing merge_group CI run
exists for the pushed commit; if so the push runs only the repository checks.
A push that skipped the queue, or an API that cannot answer, still runs
everything. The nightly still runs the whole suite.
Pull requests also run less: the reference tests only when solidcraft-cli (or
anything it depends on) is affected, and doc tests only for the affected
packages that have a library. The ci check requires the reference tests only
when they were selected.
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Clippy, the doc tests and test shards 1-2 of pushes to main and merge-queue
groups run on the self-hosted runner, alongside GitHub's runners for
everything else. Pull requests, the nightly run and Run workflow stay on
GitHub's runners. Clippy and the doc tests keep warm build directories
outside the checkout (scripts/ci/warm-target.sh).
The test archive is still built on GitHub's runners: the self-hosted
machine has a newer glibc, so binaries built there don't start on
ubuntu-24.04.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Only the Windows jobs still wait for GitHub's runners on main and in the
merge queue. The Vulkan packages are preinstalled on the self-hosted
runner (no sudo), so that step runs only on GitHub-hosted runners.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pushes to main skip boolean_props (random inputs); the nightly property-tests job runs it. The three shrunk cases are ignored tests with their issues (#1647, #1648, #1649), and proptest's failure file is named outright.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Comment /claim on an issue to be assigned and get the in progress label; /unclaim releases it. A daily sweep frees claims with no PR after 72 h or with a PR idle for 14 days.
Message catalogs sorted one message per line (cargo xtask lists [--fix], checked in cargo xtask ci and the Lists workflow); the language list one per line, English first then by id; THIRD-PARTY-LICENSES.txt and docs/features.md rewritten on main by the Generated files workflow instead of in PRs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A PR that saves something new adds crates/doc/src/format/pending/<name>.rs (a note, and an upgrade step if older designs must be rewritten). The build writes the next format number while changes are pending and lists them in format_pending; scripts/fold-format-pending.sh fixes them as v<N>/ at release time. Formats 23 and 24 move into v23/ and v24/.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Clippy, the test archive and the test shards cover the packages a PR changes plus their dependents. Main, nightly and manual runs stay full.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* Windows: resize border from the first frame, DPI-correct window moves (#1381)
- The egui resize zones were laid out after the start page's early return, so a launch without
a design had no resize edges at all. They now run on every page.
- Windows: the main window's procedure answers WM_NCHITTEST with the resize edges and corners,
Windows' own border width at the window's DPI (8 px at 100 %), so the OS shows its resize
cursors and runs its own resize (snap included) from the first message; no egui zones there.
- Windows: WM_GETDPISCALEDSIZE returns the size winit then applies (same logical size), so the
rect the OS suggests while the title bar is dragged onto a monitor with another scale is the
rect the window gets.
- Zone sizes and hit test shared in titlebar.rs and unit-tested; Windows CI checks the hit test
right after launch and a real edge drag.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Windows resize smoke: find the main window by its title
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Windows resize smoke: probe the maximized window at the screen's edge
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Action matrix: nightly shards cut by measured cost, heavy designs in slices, and a determinism check
The full matrix ran as four fixed quarters of the corpus and two of them hit the 60-minute
job limit. Now action_matrix_shard runs shard k of n (ACTION_MATRIX_SHARD=k/n), planned from
tests/action_matrix/costs.json: designs that take more than five minutes are split into slices,
and the pieces go largest first to the least loaded shard. The nightly runs 12 shards and uploads
each one's outcomes and timings; cargo xtask action-matrix --from DIR --bless records them in the
baseline and costs.json without running the matrix again. action_matrix_determinism runs a sample
twice and lists any action whose outcome changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Action matrix: costs measured on runners, 10 shards, determinism on the lighter designs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Action matrix: baseline and costs from a full run on main, 16 shards, timeouts listed
The baseline is regenerated from the 10 shards' results of a full run on 01b1b705
(cargo xtask action-matrix --from DIR --bless): 8 new designs, 302 actions that pass now,
names that changed, and 40 actions that passed before and fail now, each listed in #1255
(22 fillets refused since #949, 4 hinge blends since #1101, 9 on the loft cut, 5 single).
costs.json now holds every design's measured time, and the nightly runs 16 shards of about
17 minutes. An action that passes in the baseline and times out is listed but not judged,
and stays passing when blessed: two runs of the same build differed only on 10 actions that
took 50-84 s against the 90 s limit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Action matrix: slice heavy designs by a hash of each action's name
Slicing by index gave some slices only fillets on oracle 41 (28 slices, a multiple of the
actions per edge), three times the planned time; two shards ran past their limit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
A crash inside a graphics driver left only "an unclean exit between
commands": no backtrace, no module, no hint that it was at startup.
- The crash journal now keeps the startup step the app is in (window,
graphics instance, surface, adapter request, adapter chosen, device
creation, renderer and viewport shader compiles, surface configure,
first frame and its present, running) and the renderer as soon as the
adapter is picked. egui-wgpu tells the app about its steps through a
small hook. An unclean exit before the first frame names the step.
- Windows: an unhandled-exception filter (src/native_crash.rs, the one
Windows-only module allowed unsafe) writes the exception code, the
faulting module and offset, and a minidump next to the journal; the
next start puts them into the report.
- The Windows CI job runs a child that faults on purpose and checks the
report.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Publishing a non-prerelease release runs winget.yml, which opens the
winget-pkgs pull request for bherbruck.SolidCraft with Komac (pinned
2.16.0 binary, SHA-256 checked) from the three versioned MSIs. It skips
cleanly without the WINGET_TOKEN secret or before the package's first
version is in winget-pkgs. docs/releasing.md has the one-time token
setup; the README's Download section gains the winget install line.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Windows: start Direct3D 12 first, and Vulkan only without a D3D12 GPU
wgpu started Vulkan, D3D12 and OpenGL together and preferred Vulkan, so
every Windows start loaded all installed Vulkan drivers. An old Intel
Vulkan driver (igvk64.dll) crashed 0.10.1 at startup inside the driver.
The app now probes D3D12, then Vulkan, then OpenGL, one backend at a
time, and starts only the first with a hardware adapter (WARP when none
has one). WGPU_BACKEND still wins; graphics.json's "backend" sets the
order by hand; the software renderer (safe mode, the retry) uses D3D12
alone. A new Windows CI job starts the real app under several settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* CI: a test filter YAML parses
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* CI: the startup smoke test writes graphics.json where the app reads it
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* CI: run the WARP shader tests one at a time
WARP's shader JIT (d3d10warp.dll) crashed twice in 124 runs of the gpu
tests with four test threads, with a null read inside its own optimizer
while several devices compiled compute pipelines at once. Serial runs
did not crash.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Where SolidCraft can replace itself safely, the Update window gets Update now:
- AppImage: the new AppImage is downloaded next to the old one, verified and renamed over
it; Restart now starts it as SolidCraft exits.
- Windows MSI: the verified .msi starts (msiexec /i … /passive) once SolidCraft has closed,
after the usual questions about unsaved designs.
- Windows portable zip / standalone exe: the running solidcraft.exe is renamed to .old, the
new one takes its name (solidcraft-cli.exe too), Restart now; .old goes at the next start.
- macOS: the verified .dmg is opened (the app is ad-hoc signed and not notarized, so it isn't
replaced behind the user's back).
- Flatpak, Snap, deb, rpm, tar.gz: never replaced; the window shows the command.
Every package's SHA-256 must match the release's SHA256SUMS.txt (HTTPS, same release); a
mismatch deletes the download and changes nothing. With PUBLIC_KEY set in update/install.rs,
SHA256SUMS.txt.minisig must also verify (minisign-verify, MIT) with a trusted comment naming
the release. release.yml signs the list when the UPDATE_SIGNING_KEY secret exists and fails
when the app expects signatures but the secret is missing; docs/releasing.md has the steps.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* GPU tessellation: a pipeline the device cannot build falls back to CPU meshing instead of crashing (#1098)
Build the tessellation compute pipeline inside error scopes; TessGpu::new returns an error,
and the viewport logs it and meshes bodies on the CPU. A Windows CI job builds the pipeline
with D3D12's FXC on the WARP adapter.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Tessellation shader: basis functions in one-dimensional local arrays, so D3D12's FXC compiles it (#1098)
FXC has to unroll loops that write an array inside a struct (Basis.n0/n1) or a 2-D array
(ndu) by a counter, and cannot with run-time trip counts (X3511). A2.2 basis functions in a
local 1-D array returned whole; derivatives from the degree p-1 functions; the pole step
offsets computed rather than indexed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Only one run per concurrency group can wait. On a busy main each push replaced the waiting run, so the nightly and Run workflow runs on main were cancelled before they started. The group now includes the event.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
tests/robustness/goldens.json records what each of seeds 0-95 builds: its steps, how it ended (ok, or the kind and the start of the error it was refused with) and, for the design it left, the bodies' total volume and area (within a relative 1e-6) and their face, edge and shell counts. tests::robustness_goldens fails on any change; ROBUSTNESS_GOLDENS_BLESS="why" records one, with the reason and the seeds it moved. Pull requests that touch crates/kernel run every 8th seed; pushes to main and the nightly run every seed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Flatpak app id, desktop/metainfo/MIME file names, icon name and the window's Wayland app_id / X11 class are now ai.storyteller.solidcraft, the id the ArtCraft launcher expects.
Existing Flatpak installs move over: the Pages repo marks app/ai.storyteller.solvecraft end-of-life with a rebase to the new id, so flatpak update offers the switch and Flatpak carries ~/.var/app along. A new install next to the old one copies settings and autosaves on first launch through a read-only grant on the old data folder. The metainfo declares <replaces>/<provides>, the desktop entry X-Flatpak-RenamedFrom, and AppImages drop the menu entry an older AppImage installed. deb/rpm upgrades remove the old-named files.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A scheduled/manual CI job scans locked dependencies for advisories, bans and unknown sources with cargo-deny 0.20.2 (never on pull requests, contents: read, no secrets). The first scan flagged quick-xml 0.38.4 (RUSTSEC-2026-0194/0195), so the workspace moves to quick-xml 0.41. Fixes#468.
Co-authored-by: lillith <[email protected]>
