Nothing on the load path checked a sketch's size, and every sketch in the
timeline is solved when a design opens. The solver sizes its dense matrices by
the connected component, so a 30 MB file with 200,000 chained points asked the
allocator for terabytes and the process aborted, which no panic guard can
intercept.
Reject an oversized sketch while the design is still raw JSON, so the typed
arrays are never built, and refuse a connected component with more variables
than fits in a bounded matrix: that component now reports a failed solve and
leaves its geometry alone. 10,000 chained points went from 9.6 GB and 25
seconds to a failed solve in well under a second.
Fixes#145
Co-Authored-By: Claude Opus 5 <[email protected]>
(cherry picked from commit 04abbf95c26f68c7d0a126ed9e2827049f593361)
A construction plane built from model geometry resolves each of its sides
through the document again. That hop restarted the recursion depth at 0, so a
plane that is its own side never exceeded depth 1 and the 32-level cap never
fired: a ~600-byte design file recursed until the stack overflowed and the
process aborted, which no panic guard can intercept.
Carry the depth on the construction context so the geometry arms continue the
caller's count instead of restarting it.
Fixes#143
Co-Authored-By: Claude Opus 5 <[email protected]>
(cherry picked from commit 4bca1d49f27dfe9ef0140132746e1c7415daba8e)
`cargo xtask step-corpus --iges` (and `solvecraft-cli step-corpus --iges`) opens every oracle part.igs as File → Open does and compares body count, volume, area and face count with Fusion's measurements, writing docs/iges-import.md. The run found faces closing at an apex (a drill point's cone, a sphere's pole: the seam runs out to the apex and straight back) kept whole and meshed wrongly; they are now split along the iso-line opposite the seam like bands are (18-hole-features and 40-box-sphere-torus pass). The one failure left, 50-sweep-tight-bend, is written by Fusion as five loose, partly degenerate surfaces that Fusion cannot read back as a solid either; documented in the report. Test: a drilled blind hole round-trips through IGES.
Fixes#14
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
- solvecraft-cli fuzz / fuzz-one: seeded random modelling sessions (boxes, extruded profiles with arcs, revolves; joins and cuts of boxes, cylinders and spheres, fillets, chamfers, shells, holes, patterns) on a grid that makes coincident faces and tangencies common, every step checked (command ok, every body a sound solid via the new Body::validity, volume moving the right way), plus the boolean volume identity on random primitives; one process per seed with a time limit; failures minimised to scripts
- shell/offset: corners where a curved face meets another at an angle are refined onto the moved surfaces (Newton); edges that are neither lines nor arcs are rebuilt through their moved points; one shell per piece; faces that would cross say so (not supported yet) instead of leaving a cavity inside out; flat revolved faces count as planes; the unhealed body is tried when the healed one fails
- cylinders start their seams at an odd angle (grid-aligned seams broke booleans along them)
- partial revolves of profiles touching the axis build no zero-area face on the axis
- booleans on bodies in several pieces retry a piece at a time
- regression tests for each, and a fixed set of seeds in cargo test
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Adapted from storytold/photocraft's release.yml and packaging/ (Apache-2.0; ATTRIBUTION.md and
NOTICE say so). Packages install the licence files, THIRD-PARTY-LICENSES.txt included. The app
icon is drawn by `solvecraft-cli icon` (a blue block with a bore, rendered on a transparent
background; .ico too), so no image is committed. Notes: a short header plus GitHub's generated
What's Changed. A dry run (Run workflow, publish off) keeps the files as the release-assets
artifact. packaging-lint.yml checks the workflows, scripts and metadata.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Release assets are now the programs themselves: SolveCraft and solvecraft-cli .exe for Windows,
plain Linux binaries plus the AppImage, a macOS .dmg (SolveCraft.app with an Applications link) and
the universal CLI binary; only the web app stays a zip. The notes template takes {tag}, says to
chmod +x on Linux and macOS, and GitHub adds the change list.
Since no LICENSE or NOTICE file rides along any more, the programs carry them:
THIRD-PARTY-LICENSES.txt (written by `cargo xtask licences` from cargo metadata and each shipped
crate's own licence files, 419 crates; `cargo xtask ci` checks it is current) is embedded with
LICENSE-MIT, LICENSE-APACHE and NOTICE in solvecraft_engine::licences, shown in Help ▸ About ▸
Licences (third-party text laid out by visible rows) and printed by `solvecraft-cli licences`.
Scenario s44_about_licences.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The title bar's ×, File ▸ Quit, the OS closing the window (Alt+F4, Cmd+Q, the window manager:
close_requested is cancelled until the designs are answered) and app.quit / ui.window close all
go through documents::request_quit, which asks Save / Don't Save / Cancel once per design with
unsaved changes. Save saves (Save As for a never-saved design) and quits only if it saved; Don't
Save discards (no recovery copy is kept); Cancel or Esc stays open. Closing a tab asks the same
question (now titled "Save changes to <name>?"); New and Open never replace an unsaved design
(they open a tab). The web app asks through beforeunload while a design is unsaved. Control:
ui.documents {action: quit, answer: save|dont_save|cancel}, app.quit {force}. Tests: quit with
Save then Don't Save across two tabs, Cancel, a Save that saves nothing, Save As; scenario
s43_quit_asks_to_save.
Fixes#33
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- solvecraft_io::vfs: the engine's file access (disk natively; in the browser an in-memory set of
files the host loads and stores). File commands and write_atomic go through it.
- Web host (apps/solvecraft-web/src/files.rs): stored designs are read from OPFS at start
(storage.persist() asked for) and written back when a command writes one; Save/Save As keep
designs in the browser, exports (STEP, STL, 3MF, OBJ, ...) download as files.
- File > Open shows "Files in this browser": open, insert, rename, download, delete, plus open or
insert from the computer (showOpenFilePicker where there is one, an <input type=file>
otherwise). Files dropped on the page are inserted or opened.
- Unsaved work is autosaved to OPFS and offered again after a reload or crash.
- Start page recents come from the stored designs, with thumbnails. In the browser the samples
are built when opened (a picture blocks the page there, and a kernel panic can't be caught).
- Pages without OPFS (http on a network address, old browsers) keep designs in local storage.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
- IGES import (kernel iges_in, from the published specification). The file
is restated as STEP and read by the STEP reader, so an IGES file becomes
the same Import base feature.
- Manifold solid B-reps (186/514/510/508/504/502).
- Trimmed (144), bounded (143) and bare B-spline surfaces, sewn into a
solid by shared edges, with face orientation made consistent.
- Curves: lines, arcs, ellipses, composite and rational B-spline curves.
- Surfaces: planes, analytic surfaces 190-198, B-spline surfaces,
surfaces of revolution and tabulated cylinders.
- Transformations, units, colours, names (406 form 15 or labels).
Open, insert and drop .igs/.iges like STEP.
- IGES export (kernel iges_out): each body as a manifold solid B-rep on the
surfaces a STEP export uses, with name properties and colours.
ExportCommand to .igs.
- OBJ import as mesh bodies: objects/groups, polygons fanned, negative
indices, bad lines reported.
- STL: binary files whose header starts with "solid" and those with a zero
triangle count read as binary; non-finite vertices dropped; facet
normals ignored; ASCII with non-UTF-8 names. Mesh bodies get consistent
winding (stray inverted facets turned over).
- Tests: primitives and features round-trip through IGES (volume, area,
name, colour). Six trimmed patches sew into a closed box. Hostile IGES,
OBJ and STL inputs never panic. STL quirks. The engine exports a design
to IGES and opens it again. All 76 oracle parts round-trip through IGES
with matching volume (local check).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Fusion round trip WARNs on face counts:
- 48: the pulley's annular end faces arrived as 240° and 120° sectors.
- 54: the side faces and holes of a body glued to its mirror image came
in halves.
Changes:
- Planes merge: PLANE faces and flat B-spline sheets, as well as revolved
planes. A plane keeps several loops (an annulus, a face with holes), no
seam. Flat B-spline sheets are written as PLANE.
- Pieces of an extruded cylinder (B-spline sheets) merge when their edges
are circles square to the axis. The merged face is written as a
CYLINDRICAL_SURFACE, with its parameter seam on the face's seam edge.
- A full turn's loop is built explicitly: ring, seam, other ring (or the
apex on the axis), seam back. Before, it depended on edge order, and
after 81c85b5 the pulley's last pieces no longer merged.
- The read-back check moved to the whole file. If the merged file reads
with warnings and the unmerged one does not, the unmerged one is
written.
Results: 48 has 12 faces (Fusion 12), 54 has 12 (Fusion 12). Oracle
results are unchanged (73 PASS) and the STEP corpus passes 76/76. New
test: a plate with a hole glued to its mirror exports 8 faces, all
planes and cylinders, and round-trips.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Start page (shown on launch without a file, and from the house button in the application bar):
New Design, Open, recent designs (kept in the preferences, newest first) and built-in samples,
each card with a picture rendered from the design in the background. Samples are scripts of
engine commands: the sample plate plus a sheet metal bracket, a hinge assembly with a revolute
joint, a plastic enclosure (lip, bosses, rest, snap fit), a bolted flange with a parametric
circular pattern and a vent plate with a parametric rectangular pattern (test: all build
without a failing feature).
Several open designs as tabs in the application bar: each keeps its own session (undo,
selection), camera and hidden/shown items; + and Ctrl+N open a new design, opening a file or a
sample uses a new tab unless the current design is blank, closing a tab with unsaved changes
asks Save / Don't Save / Cancel. Control channel: ui.documents and ui.home (docs/control-protocol.md).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
- Surfaces of revolution follow ISO 10303-42 strictly in reader and writer: the
normal is d/d(angle) x d/d(profile), the opposite of truck's revolution, as
Fusion reads it (fixes Fusion inverting fillet sphere corners and the dimple).
step_orientation_errors flags faces whose loop runs clockwise round their
normal; engine, oracle and kernel round trips assert it.
- Revolved faces with analytic profiles are written as native PLANE,
CYLINDRICAL/CONICAL/SPHERICAL/TOROIDAL surfaces, and the pieces truck splits
a revolution into are merged back into one face per surface (with a seam
edge for full turns), so face counts match other systems.
- A horn torus (tight sweep: tube touching its axis) is written as one rational
B-spline face whose loop passes the pole twice, with truck's zero-length pole
edges collapsed, instead of a degenerate surface of revolution; the reader
starts such figure-eight loops off the pole (Fusion's own part 50 now imports
with the right volume).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Our writer assembles the file: AP242 header and contexts, a product per part
(or per component, with NEXT_ASSEMBLY_USAGE_OCCURRENCE and item-defined
placements per occurrence), named solids, surface colours as styled items,
ADVANCED_FACE for advanced breps. truck now writes only each body's B-rep,
which we copy in; identical geometric entities are written once and shared.
Designs with components export as assemblies (bodies in component frames).
step_validate also rejects unreferenced non-root entities. Tests: the sample
plate and a component assembly export, validate and read back with no
warnings and the same volume, area and face counts; the oracle replay checks
area and faces too (39 rebuildable cases pass). An independent Part 21
parser (step-p21, run outside the repo) accepts our exports.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Vendored truck-stepio (writer only): an intersection curve's second surface
was written at the first one's id (duplicate ids for every boolean edge),
and revolved surfaces lost their orientation (the modeling-surface sense was
always true; inverted or mirrored revolutions came out inside out). Export
now writes intersection edges as C1 cubic B-splines through exact points,
so files carry plain 3D curves and no redundant surfaces.
Vendored truck-meshalgo: hinted parameter searches that run off a B-spline's
domain are rejected or clamped (meshing their grid never finished).
STEP import: straight revolution profiles are bounded in the meridian plane
and stop at the axis; loops on revolutions start away from the axis; face
extents include edge end points. Edges between pieces of one split surface
draw as seams.
kernel::step_validate checks a STEP file (duplicate ids, dangling
references, dense numbering); the oracle replay now exports every rebuilt
part, validates it and re-imports it with no warnings and the same volume
(all 32 rebuildable cases pass).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Export: ExportCommand/CLI --out/MCP export with .3mf write a 3MF Core package
([Content_Types].xml, _rels/.rels, 3D/3dmodel.model; millimetres), one
mesh object and build item per body, named after it, vertices shared and
welded watertight (T-junctions between faces split), base-material colours
when bodies carry one (STEP colours now ride on bodies). Tessellation as
for STL. File > Export 3MF.
Import: doc.open/drag-drop/CLI/MCP open accept .3mf and .stl; Insert Mesh
(ParaMeshInsertAlignCommand) adds them to a design as a MeshImport feature.
Kernel mesh bodies render, measure exactly, move and export; solid
features refuse them with a clear error. 3MF reading flattens components
and build transforms, converts units, reads colours; sizes, entries,
nesting and element counts are capped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
solvecraft-cli step-corpus and cargo xtask step-corpus [DIR]: open every
Fusion oracle part.step and compare body count, volume and area (1e-3) and
face count with Fusion's measurements; docs/step-import.md (29/29 pass).
solvecraft-cli eval/run accept STEP files and --in FILE.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Import base feature (FeatureKind::Import, timeline type BaseFeature) holding
the STEP text and the file's product tree; bodies named from the file.
doc.open accepts .step/.stp (any case) as a new design; Insert STEP
(FusionImportCommandFromToolbar) adds one to the current design; File menu,
SOLID > INSERT, drag-and-drop (insert into a non-empty design, else open),
'solvecraft part.step', MCP open. Features (fillet, hole, sketch-on-face
cut, shell) work on imported bodies. Imports are cached so a file is read
once per command. Measure tightens its chord tolerance for small radii.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
bherbruck