- motion.plot: joint values and a point's path sampled as the study plays (closed loops
following), with velocities and accelerations by finite differences, per step or per
second with a duration.
- motion.interference: the pairs of parts that pass through each other along a study, with
the first step, the step ranges, the depth and the shared volume; occurrences, against
or contact sets choose the pairs; bounded samples and work.
- Motion Study dialog: a Study box opens a saved study; a chart of a joint value or a
picked point with a cursor at the step shown (click to move there); Check collisions
with the steps shaded on the chart. ui.start motion.study takes study.
An Edge Flange feature can set the shape and size of the relief at the corners its flanges make, in place of the sheet metal rule's. Design format 24.
Co-authored-by: NOWN-DEV <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
Adds File > Export > Current View as DXF: the visible bodies projected from the current camera onto 2D LINE/LWPOLYLINE entities, with hidden edges omitted or dashed.
Co-authored-by: cronos <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Thin extrude caps are certified by the curves the wall follows, so a sketch attached to a cap survives switching between solid and thin (#1519).
Co-Authored-By: Philipp Bischoff <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.
Co-authored-by: SychPL <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
Picked circles and arcs keep their own centres when measured; only a cylindrical face uses its axis.
Co-authored-by: cronos <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
A field the definition doesn't have is refused with the fields it does have, instead of reporting success and changing nothing (#1491).
Co-Authored-By: Erikas <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu)
Sketch geometry had no copy or paste: Ctrl+C / Ctrl+X / Ctrl+V arrive as
clipboard events that nothing handled, and the sketch context menu had no
Copy, Cut or Paste.
- sketch.copy / sketch.cut / sketch.paste: lines, arcs, circles, ellipses,
splines, conics, points and text. Constraints and dimensions wholly among
the copied entities come along (each dimension gets its own parameter
with the same expression); ones that reach outside, fixes and pattern or
offset relations are dropped. Paste goes centred at `at`, by
`translate`, or offset from the original (same sketch) / at the same
coordinates (another sketch, on its plane). One undo step; the pasted
geometry is selected.
- Ctrl+C / Ctrl+X / Ctrl+V in a sketch (paste at the cursor), and Cut,
Copy and Paste in the sketch context menu. Outside a sketch Ctrl+C /
Ctrl+V copy and paste the selected timeline features. A copy also puts a
line of text on the system clipboard so the next Ctrl+V is delivered.
Fixes#1480
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Keep a pasted text's height and angle expressions, drop its place's
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes#1362.
Co-authored-by: NOWN-DEV <[email protected]>
MateuszSychXpl