1b-agent/solidcraft-upstream
1
0 Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
813bee8914ffe913710f95fc4fa8bbcfcf4e61e3
solidcraft-upstream/tests/action_matrix/baseline.json
T
bherbruckandClaude Opus 5.5 813bee8914 Fillet: refuse a result with openings in its surface (#871) (#949) 
* Fillet: refuse a result with openings in its surface (#871)

A fillet on #871's part (radius 1 on a window's edges and on the sides of a
block 1.26 mm away) came back closed as topology with every face meshing, but
the rounds overlapped and the end faces' boundary loops crossed, so the model
showed holes. The constant-radius fillet now checks its result before taking it:
the body's mesh, welded within a millionth of its size, must have no edge
without as many triangles running the other way along it, except for cracks
within the mesh tolerance where fitted curves meet. A result that fails is
refused, so the corner build gets its try and the radius search treats it as
too large.

Body::open_mesh_edges is the check. Kernel tests cover the #871 part (refused
at radius 1, closed with a round on every edge at 0.5), and an engine test runs
the fillet from the report and leaves the part as it was. All 96 robustness
seeds build the same with and without it.

Fixes #871

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Check fillets for crossed face boundaries, not free mesh edges

Free edges in the mesh also come from cracks where fitted curves meet (corner
patches, rounds ending on curved edges), so the mesh test refused good fillets.
The check is now on the cause of #871: a planar face whose boundary loops cross
each other or themselves has no inside. Body::crossed_face_loops samples each
planar face's loops within 1/1000 of the size and counts proper crossings
(touching within a millionth doesn't count).

The pyramid apex blend and the loft fillets build again. Ten action-matrix fillets
stay refused, recorded in the baseline: r = 3 on the 2 mm rim of oracle 09's
shelled box (the round runs past the inner wall; the result was 240 mm3 lighter
than any round can make it), and the six seam-edge fillets on oracle 60's bolt
holes, whose boundary jumps across the hole.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-14 01:36:30 -04:00

11411 lines
1.4 MiB
Plaintext
Raw Blame History

{
"about": "The action matrix's ratchet: design, entity, the actions tried on it (failing ones marked !). apps/solidcraft-cli/tests/action_matrix.rs, docs/action-matrix.md. Update with cargo xtask action-matrix --bless.",
"designs": {
"corpus/components-arm": {
"ArmBody (Arm:2)/F4:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F4:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:+y|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+y|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:+z|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+z|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:-x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:-y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F5:blend:F4:+y|F4:+z": "curved.axis curved.tangent_plane",
"ArmBody (Arm:2)/body": "body.copy body.mirror body.move !body.pattern",
"ArmBody (Arm:2)/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:+y & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:+z & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:+z & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+y & F4:-x & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+y & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+z & F4:-x & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+z & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/F4:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F4:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:+y|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+y|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane edge.project",
"ArmBody/F4:+z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:+z|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+z|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane edge.project",
"ArmBody/F4:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:-x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:-y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F5:blend:F4:+y|F4:+z": "curved.axis curved.tangent_plane",
"ArmBody/body": "body.copy body.mirror body.move body.pattern",
"ArmBody/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:+y & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:+z & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:+z & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+y & F4:-x & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+y & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+z & F4:-x & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+z & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"Base/F12:side:c1#1": "curved.axis curved.tangent_plane",
"Base/F12:side:c1#1|F1:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F12:side:c1#1|F1:-z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F12:side:c1#2": "curved.axis curved.tangent_plane",
"Base/F12:side:c1#2|F1:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F12:side:c1#2|F1:-z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/body": "body.copy body.mirror body.move body.pattern",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:+z]": "vertex.point",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:+z] (2)": "vertex.point",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:-z]": "vertex.point",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:-z] (2)": "vertex.point",
"Base/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Base/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/F10:blend:F9:+y|F9:+z": "curved.axis curved.tangent_plane",
"Body1/F10:blend:F9:+y|F9:+z|F9:+x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:blend:F9:+y|F9:+z|F9:+y": "edge.axis edge.normal_plane edge.project",
"Body1/F10:blend:F9:+y|F9:+z|F9:+z": "edge.axis edge.normal_plane edge.project",
"Body1/F10:blend:F9:+y|F9:+z|F9:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:+x|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x|F9:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+y|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:+z|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+z|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-x|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:-y|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+x & F9:+y]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+x & F9:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+y & F9:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+z & F9:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+x & F9:+y & F9:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+x & F9:+z & F9:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+x & F9:-y & F9:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+y & F9:-x & F9:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+z & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:-x & F9:-y & F9:-z]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/issue-489-stacked-join": {
"Body1/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l1,F4:side:l5]": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:top#[F2:side:l1,F4:side:l5]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top#[F2:side:l3,F4:side:l7]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l3,F4:side:l7]|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:side:l5": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l7": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l7|F4:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top#[F2:side:l1,F4:side:l5]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top#[F2:side:l1,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top#[F2:side:l3,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top#[F2:side:l1,F4:side:l5] & F4:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:top#[F2:side:l3,F4:side:l7] & F4:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F4:side:l5 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top#[F2:side:l3,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:top#[F2:side:l1,F4:side:l5] & F4:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:top#[F2:side:l3,F4:side:l7] & F4:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F4:side:l5 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/issue-616-lid-ribs": {
"Lid/F10:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:+x|F10:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F10:-y|F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:+x|F11:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:side:l6#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F11:-y|F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+x|F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+y|F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l4,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l6#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l8,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l8#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F4:side:l8#[F8:+y,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-z|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F2:blend:F1:+x|F1:+y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+y|F1:-x": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:-x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l2|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l5|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F11:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F11:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F11:+y,F4:side:l7]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F11:+y,F4:side:l7]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F11:+y,F4:side:l7]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:side:l8#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F9:+y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F9:+y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F8:+y,F9:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F8:+y,F9:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:top|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+x|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:-x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:+x|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:+y|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:-x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F7:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F7:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/body": "body.copy body.mirror body.move body.pattern",
"Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+z & F10:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F10:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F4:side:l6#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+z & F10:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F11:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+z & F11:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F11:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F11:+y,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F4:side:l6#[F11:+y,F4:side:l7] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+z & F11:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F4:side:l6#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l8#[F4:side:l5,F8:-y] & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l2,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l6,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F9:+y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l8#[F4:side:l7,F9:+y] & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F8:+y,F9:-y] & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F8:+y,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l2,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l6#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l6,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F9:+y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l5,F8:-y] & F4:top & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F9:+y] & F4:top & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F8:+y,F9:-y] & F4:top & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F8:+y,F9:-y] & F4:top & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:+y & F8:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:-x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:+y & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:+y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:+y & F8:-x & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:-x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/joints-hinge": {
"Body1/F3:+x": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.sketch",
"Body1/F3:+x|F3:+y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:+x|F3:+z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:+x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:+x|F3:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:+y": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:+y|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:+y|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:+y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:+z|F3:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:-x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:-x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:-y": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:-y|F3:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:-z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.shell+edit face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+x & F3:+z & F3:-y]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+y & F3:+z & F3:-x]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+y & F3:-x & F3:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:+z & F3:-x & F3:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:-x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/F4:bottom": "!face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body2/F4:bottom|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:bottom|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:side#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body2/F4:side#1|F4:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F4:side#2": "!curved.axis curved.tangent_plane",
"Body2/F4:side#2|F4:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F4:top": "!face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Body2/v[F4:bottom & F4:side#1 & F4:side#2]": "vertex.point",
"Body2/v[F4:bottom & F4:side#1 & F4:side#2] (2)": "vertex.point vertex.point+edit",
"Body2/v[F4:side#1 & F4:side#2 & F4:top]": "vertex.point",
"Body2/v[F4:side#1 & F4:side#2 & F4:top] (2)": "vertex.point",
"Body3/F7:+x": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Body3/F7:+x|F7:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:+x|F7:+z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body3/F7:+x|F7:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:+x|F7:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body3/F7:+y": "!face.angle_plane face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body3/F7:+y|F7:+z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:+y|F7:-x": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:+y|F7:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:+z": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body3/F7:+z|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:+z|F7:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body3/F7:-x|F7:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:-x|F7:-z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body3/F7:-y": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body3/F7:-y|F7:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:-z": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body3/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Body3/v[F7:+x & F7:+y & F7:+z]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+x & F7:+y & F7:-z]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+x & F7:+z & F7:-y]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+x & F7:-y & F7:-z]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+y & F7:+z & F7:-x]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+y & F7:-x & F7:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body3/v[F7:+z & F7:-x & F7:-y]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:-x & F7:-y & F7:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body4/F8:bottom": "!face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body4/F8:bottom|F8:side#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body4/F8:bottom|F8:side#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body4/F8:side#1": "curved.axis curved.tangent_plane",
"Body4/F8:side#1|F8:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body4/F8:side#2": "curved.axis curved.tangent_plane",
"Body4/F8:side#2|F8:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body4/F8:top": "!face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body4/body": "body.copy body.mirror body.move body.pattern",
"Body4/v[F8:bottom & F8:side#1 & F8:side#2]": "vertex.point",
"Body4/v[F8:bottom & F8:side#1 & F8:side#2] (2)": "vertex.point",
"Body4/v[F8:side#1 & F8:side#2 & F8:top]": "vertex.point",
"Body4/v[F8:side#1 & F8:side#2 & F8:top] (2)": "vertex.point",
"design": "load"
},
"corpus/m0-box-fillet-hole": {
"Body1/F2:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l5|F3:blend:F2:side:l5|F2:side:l8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l6|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l7|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l8|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:blend:F2:side:l5|F2:side:l8": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start|F3:blend:F2:side:l5|F2:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:start|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.extrude+edit face.hole face.offset_plane face.press_pull !face.press_pull+edit face.shell face.sketch",
"Body1/F2:top|F3:blend:F2:side:l5|F2:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:c1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:c1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F2:side:l5|F2:side:l8": "curved.axis curved.tangent_plane",
"Body1/F5:side:c1#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:side:c1#2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l5 & F2:start & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5 & F2:top & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l6 & F2:side:l7 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l6 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l8 & F2:start & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:top & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:start & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:start & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:top & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"corpus/m0-revolve-primitives": {
"Body1/F2:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:end|F2:side:l1#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:end|F2:side:l2#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:end|F2:side:l3#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:end|F2:side:l4#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:end]|F2:side:l2#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:end]|F2:side:l4#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:start]|F2:side:l2#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:start]|F2:side:l4#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l1#[F2:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l1#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#[F2:end]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#[F2:end]|F2:side:l3#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:start]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#[F2:start]|F2:side:l3#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3#[F2:end]|F2:side:l4#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3#[F2:start]|F2:side:l4#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l3#[F2:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l3#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#[F2:end]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:end & F2:side:l1#[F2:end] & F2:side:l2#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:end & F2:side:l1#[F2:end] & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:end & F2:side:l2#[F2:end] & F2:side:l3#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:end & F2:side:l3#[F2:end] & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:end] & F2:side:l2 & F2:side:l2#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:end] & F2:side:l4 & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:start] & F2:side:l2 & F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:start] & F2:side:l4 & F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1#[F2:start] & F2:side:l2#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1#[F2:start] & F2:side:l4#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l2#[F2:end] & F2:side:l3 & F2:side:l3#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l2#[F2:start] & F2:side:l3 & F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:start] & F2:side:l3#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l3#[F2:end] & F2:side:l4 & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l3#[F2:start] & F2:side:l4 & F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3#[F2:start] & F2:side:l4#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body2/F3:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:+x|F3:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+x|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:+y|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:+z|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:-x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-x|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:-y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-y|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:-z|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:side#1": "curved.axis curved.tangent_plane",
"Body2/F4:side#2": "curved.axis curved.tangent_plane",
"Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.move body.pattern",
"Body2/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:+z & F3:-y]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+y & F3:+z & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+y & F3:-x & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+y & F3:-x & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+z & F3:-y & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+z & F4:side#1 & F4:side#2]": "vertex.point",
"Body2/v[F3:+z & F4:side#1 & F4:side#2] (2)": "vertex.point",
"Body2/v[F3:-x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:-x & F3:-y & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:-z & F4:side#1 & F4:side#2]": "vertex.point",
"Body2/v[F3:-z & F4:side#1 & F4:side#2] (2)": "vertex.point",
"design": "load"
},
"corpus/modern-path-pattern": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"design": "load"
},
"corpus/modern-plastic": {
"Body1/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:+x|F2:inner:F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+x|F2:inner:F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+x|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+x|F3:inner:F1:+z": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:+y|F2:inner:F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+y|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+y|F3:inner:F1:+z": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-x|F2:inner:F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-x|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-x|F3:inner:F1:+z": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-y|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-y|F3:inner:F1:+z": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F4:post:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F4:post:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:0": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:base": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:inner:F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:hole:base|F4:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:base|F4:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:side:0": "curved.axis curved.tangent_plane",
"Body1/F4:hole:side:0|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:side:1": "curved.axis curved.tangent_plane",
"Body1/F4:hole:side:1|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:side:0": "curved.axis curved.tangent_plane",
"Body1/F4:post:side:0|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:side:1": "curved.axis curved.tangent_plane",
"Body1/F4:post:side:1|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:rest:side:0": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:0|F5:rest:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:0|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:0|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:1|F5:rest:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:1|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:2|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:2|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:3|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:4|F5:rest:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:4|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:4|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:5": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:5|F5:rest:side:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:5|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:6": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:6|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:6|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:7": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:7|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F6:arm:base": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:base|F6:arm:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:1|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:1|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:2|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:2|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:3|F6:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:3|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:4|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:4|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:5|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:+y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:+y & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:-y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:-y & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+y & F2:inner:F1:-x & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+y & F2:inner:F1:-x & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-x & F2:inner:F1:-y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-x & F2:inner:F1:-y & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F4:post:side:0 & F4:post:side:1]": "vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F4:post:side:0 & F4:post:side:1] (2)": "vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:0 & F5:rest:side:1]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:0 & F5:rest:side:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:1 & F5:rest:side:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:2 & F5:rest:side:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:base & F6:arm:side:1]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:base & F6:arm:side:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:side:1 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:side:5 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:4 & F5:rest:side:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:4 & F5:rest:side:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:5 & F5:rest:side:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:6 & F5:rest:side:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:hole:base & F4:hole:side:0 & F4:hole:side:1]": "vertex.point",
"Body1/v[F4:hole:base & F4:hole:side:0 & F4:hole:side:1] (2)": "vertex.point",
"Body1/v[F4:hole:side:0 & F4:hole:side:1 & F4:post:top]": "vertex.point",
"Body1/v[F4:hole:side:0 & F4:hole:side:1 & F4:post:top] (2)": "vertex.point",
"Body1/v[F4:post:side:0 & F4:post:side:1 & F4:post:top]": "vertex.point",
"Body1/v[F4:post:side:0 & F4:post:side:1 & F4:post:top] (2)": "vertex.point",
"Body1/v[F5:rest:side:0 & F5:rest:side:1 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:0 & F5:rest:side:3 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:1 & F5:rest:side:2 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:2 & F5:rest:side:3 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:4 & F5:rest:side:5 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:4 & F5:rest:side:7 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:5 & F5:rest:side:6 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:6 & F5:rest:side:7 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:1 & F6:arm:side:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:2 & F6:arm:side:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:3 & F6:arm:side:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:4 & F6:arm:side:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:1 & F6:arm:side:2 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:2 & F6:arm:side:3 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:3 & F6:arm:side:4 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:4 & F6:arm:side:5 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/modern-sheet-metal": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10|F2:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
"Body1/F2:face:14|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:15": "curved.axis curved.tangent_plane",
"Body1/F2:face:15|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:16|F2:face:2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:17|F2:face:3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18": "curved.axis curved.tangent_plane",
"Body1/F2:face:18|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:19": "curved.axis curved.tangent_plane",
"Body1/F2:face:19|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:15": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:19 & F2:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:12 & F2:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:13 & F2:face:19 & F2:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:12 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:18 & F2:face:20 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:12 & F2:face:13 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:13 & F2:face:18 & F2:face:21 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:16 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:17 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:16 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:17 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:20 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:21 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:20 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:21 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/move-bodies": {
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Peg/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Peg/body": "body.copy body.mirror body.move body.pattern",
"Peg/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/naming-split-pieces": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l2,F4:side:l2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l2,F4:side:l2]|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l4,F4:side:l4]|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "curved.axis curved.tangent_plane",
"Body1/F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l2,F4:side:l2] & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l4,F4:side:l4] & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l2,F4:side:l2] & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l4,F4:side:l4] & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/split-body-pieces": {
"Body1 (1)/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:side:l1|F2:side:l2#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l1|F2:side:l4#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l1|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l1|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:start#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:start#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.normal_plane edge.project",
"Body1 (1)/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "curved.axis curved.tangent_plane",
"Body1 (1)/body": "body.copy body.mirror body.move body.pattern",
"Body1 (1)/v[F2:side:l1 & F2:side:l2#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l1 & F2:side:l2#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l1 & F2:side:l4#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l1 & F2:side:l4#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"demo/enclosure_steps": {
"Enclosure/F10:hole:base": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F10:hole:base|F10:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:hole:base|F10:hole:side:1": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F10:hole:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F10:hole:side:0|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:hole:side:1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F10:hole:side:1|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F10:post:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F10:post:side:0|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:side:0|F4:inner:F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F10:post:side:1|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:side:1|F4:inner:F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Enclosure/F2:side:l2|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:top~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:top~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:top~3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F6:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F6:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F6:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l2|F6:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F6:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F6:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Enclosure/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:start": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l2~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F4:inner:F2:side:l2~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F4:inner:F2:side:l2~3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start~3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l2~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l2|F6:side:l2~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l2|F6:side:l2~3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F7:post:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:start|F7:post:side:1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F8:post:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:start|F8:post:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F9:post:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F9:post:side:1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F6:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F6:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:hole:base|F7:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F7:hole:base|F7:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F7:hole:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F7:hole:side:0|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:hole:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F7:hole:side:1|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:post:side:0": "curved.axis curved.axis+edit curved.tangent_plane",
"Enclosure/F7:post:side:0|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F7:post:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F7:post:side:1|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F8:hole:base": "face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Enclosure/F8:hole:base|F8:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:hole:base|F8:hole:side:1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F8:hole:side:0": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F8:hole:side:0|F8:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:hole:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F8:hole:side:1|F8:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:post:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F8:post:side:0|F8:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F8:post:side:1": "curved.axis curved.axis+edit curved.tangent_plane",
"Enclosure/F8:post:side:1|F8:post:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F8:post:top": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Enclosure/F9:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F9:hole:base|F9:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F9:hole:base|F9:hole:side:1": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F9:hole:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F9:hole:side:0|F9:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F9:hole:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F9:hole:side:1|F9:post:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F9:post:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F9:post:side:0|F9:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F9:post:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F9:post:side:1|F9:post:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F9:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/body": "body.copy body.mirror body.move body.pattern",
"Enclosure/v[F10:hole:base & F10:hole:side:0 & F10:hole:side:1]": "vertex.point",
"Enclosure/v[F10:hole:base & F10:hole:side:0 & F10:hole:side:1] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F10:hole:side:0 & F10:hole:side:1 & F10:post:top]": "vertex.point",
"Enclosure/v[F10:hole:side:0 & F10:hole:side:1 & F10:post:top] (2)": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F10:post:top]": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F10:post:top] (2)": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F4:inner:F2:start]": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F4:inner:F2:start] (2)": "vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start]": "vertex.point",
"Enclosure/v[F2:side:l2 & F2:start] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:top]": "vertex.point",
"Enclosure/v[F2:side:l2 & F2:top] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l2]": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l2 & F6:side:l2] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l2 & F6:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2]": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2]": "vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l4]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l4] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"design": "load"
},
"demo/logo-up-down-join": {
"Body2/F6:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body2/F6:side:l10": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body2/F6:side:l10|F6:side:l7": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F6:side:l10|F6:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l10|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l10|F7:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l10|F7:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l1|F6:side:l10": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l1|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l1|F7:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l4": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body2/F6:side:l4|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l4|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l4|F7:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body2/F6:side:l7|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l7|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l7|F7:bottom": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l7|F7:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l8": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body2/F6:side:l8|F6:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l8|F6:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l8|F6:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F6:side:l8|F7:bottom": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l8|F7:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l9": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body2/F6:side:l9|F6:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F6:side:l9|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l9|F7:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l9|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F6:start|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:start|F7:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:top": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body2/F7:bottom": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body2/F7:bottom|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F7:bottom|F7:side:l5": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F7:side:l12": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F7:side:l12|F7:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F7:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F7:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.mirror+edit body.move body.move+edit body.pattern",
"Body2/v[F6:side:l1 & F6:side:l10 & F6:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body2/v[F6:side:l1 & F6:side:l10 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l1 & F6:side:l4 & F6:start & F7:side:l12 & F7:side:l5 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l1 & F6:side:l4 & F6:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l10 & F6:side:l7 & F7:bottom]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l10 & F6:side:l7 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l10 & F6:side:l9 & F6:top]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l10 & F6:side:l9 & F7:bottom]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l4 & F6:side:l7 & F6:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l4 & F6:side:l7 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l7 & F6:side:l8 & F6:top]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l7 & F6:side:l8 & F7:bottom]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l8 & F6:side:l9 & F6:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l8 & F6:side:l9 & F6:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l8 & F6:start & F7:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l8 & F7:bottom & F7:side:l5]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l9 & F6:start & F7:side:l12]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body2/v[F6:side:l9 & F7:bottom & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body2/v[F7:bottom & F7:side:l12 & F7:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"demo/pi-case": {
"Body1/F11:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F11:side:l5|F11:side:l6": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l5|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F11:side:l5|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l6|F11:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F4:inner:F2:side:l2~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l7|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l7|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F11:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l8|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F11:side:l8|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F11:side:l8|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l8|F4:inner:F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5|F13:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l5|F13:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l6|F13:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l6|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F13:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7|F13:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l7|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F13:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l8|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l8|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l1|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l12~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l12~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l14~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l14~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l18~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F9:side:l18~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F9:side:l20~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F9:side:l20~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F9:side:l5#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l5#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l5#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l7#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l7#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l7#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l8~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l8~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~7": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~8": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~7": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~8": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l1~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l1~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l1~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l1~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~7": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~7": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l12~1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l12~2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l14~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l14~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l18~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l18~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l20~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l20~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l5#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l5#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l5#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:[email protected]]": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:[email protected]]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell !face.shell+edit face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:[email protected]]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F6:side:c2]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F6:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F6:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F6:[email protected]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F6:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l12": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l14": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l18": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F9:side:l20": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F9:side:l5#[F9:side:l12,F9:side:l14]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F9:side:l5#[F9:side:l18,F9:side:l20]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F9:side:l5#[F9:side:l6,F9:side:l8]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F9:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l7#[F9:side:l12,F9:side:l14]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l7#[F9:side:l18,F9:side:l20]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F9:side:l7#[F9:side:l6,F9:side:l8]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F9:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.copy+edit body.mirror body.mirror+edit body.move body.pattern",
"Body1/v[F11:side:l5 & F11:side:l6 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l5 & F11:side:l6 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l5 & F11:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l5 & F11:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l6 & F11:side:l7 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l6 & F11:side:l7 & F4:inner:F2:side:l2]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Body1/v[F11:side:l6 & F2:side:l2]": "vertex.point",
"Body1/v[F11:side:l6 & F4:inner:F2:side:l2]": "vertex.point",
"Body1/v[F11:side:l7 & F11:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l7 & F11:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l8 & F2:side:l2]": "vertex.point",
"Body1/v[F11:side:l8 & F4:inner:F2:side:l2]": "vertex.point",
"Body1/v[F13:side:l5 & F13:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5 & F13:side:l6 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5 & F13:side:l8 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5 & F13:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6 & F13:side:l7 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l6 & F13:side:l7 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l7 & F13:side:l8 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7 & F13:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:[email protected] & F13:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:start]": "vertex.point",
"Body1/v[F2:side:l1 & F2:start] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:start] (3)": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:start] (4)": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:start] (5)": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:start] (6)": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:top]": "vertex.point",
"Body1/v[F2:side:l1 & F2:top] (2)": "vertex.point",
"Body1/v[F2:side:l1 & F2:top] (3)": "vertex.point",
"Body1/v[F2:side:l1 & F2:top] (4)": "vertex.point",
"Body1/v[F2:side:l1 & F2:top] (5)": "vertex.point",
"Body1/v[F2:side:l1 & F2:top] (6)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (6)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (7)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (6)": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (7)": "vertex.point",
"Body1/v[F2:side:l1 & F9:side:l12 & F9:side:l5#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F9:side:l12 & F9:side:l7#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l12]": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F9:side:l14 & F9:side:l5#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l14 & F9:side:l7#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F9:side:l14]": "vertex.point",
"Body1/v[F2:side:l1 & F9:side:l18 & F9:side:l5#[F9:side:l18,F9:side:l20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l18 & F9:side:l7#[F9:side:l18,F9:side:l20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l18]": "vertex.point",
"Body1/v[F2:side:l1 & F9:side:l20 & F9:side:l5#[F9:side:l18,F9:side:l20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l20 & F9:side:l7#[F9:side:l18,F9:side:l20]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F9:side:l20]": "vertex.point",
"Body1/v[F2:side:l1 & F9:side:l5#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l5#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l6 & F9:side:l7#[F9:side:l6,F9:side:l8]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F9:side:l6]": "vertex.point",
"Body1/v[F2:side:l1 & F9:side:l7#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F9:side:l8]": "vertex.point",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:start]": "vertex.point",
"Body1/v[F2:side:l2 & F2:start] (2)": "vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top]": "vertex.point",
"Body1/v[F2:side:l2 & F2:top] (2)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (6)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (7)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
"design": "load"
},
"demo/pi-case-0.8": {
"Body1/F10:side:l11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l11|F10:side:l12": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l11|F10:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l11|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l11|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F10:side:l12|F10:side:l13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l12|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l12|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l13|F10:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l13|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l13|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l14": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l14|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l14|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l17": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l17|F10:side:l18": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l17|F10:side:l20": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l17|F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F10:side:l17|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l18": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F10:side:l18|F10:side:l19": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l18|F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l18|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F10:side:l19": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l19|F10:side:l20": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F10:side:l19|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l19|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l20": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l20|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l20|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F10:side:l5|F10:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l5|F10:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l5|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l5|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F10:side:l6|F10:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l6|F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l6|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F10:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l7|F10:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l7|F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l7|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F10:side:l8|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l8|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F12:side:l5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F12:side:l5|F12:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l5|F12:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l5|F4:inner:F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F12:side:l6|F12:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l6|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l6|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F12:side:l7|F12:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l7|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F12:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F12:side:l8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F12:side:l8|F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l8|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l5|F14:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5|F14:side:l8": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l5|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l5|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6|F14:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:[email protected]|F14:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l7|F14:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:[email protected]|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:[email protected]|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l8|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:l8|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k15": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k9": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l57": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l58": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l59": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l60": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l61": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l62": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l63": "edge.axis edge.axis+edit !edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l64": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l65": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l66": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l67": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l68": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l69": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l70": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l71": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l72": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l73": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l74": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l75": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l76": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l77": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l78": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l79": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l80": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l81": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l82": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l83": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l84": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l85": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l86": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:k10|F17:side:k11": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k10|F17:side:k9": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k10|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:k11|F17:side:k12": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k11|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k12|F17:side:l58": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k12|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:k13|F17:side:k14": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k13|F17:side:l63": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k13|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:k14|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:k15|F17:side:k16": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:k15|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:k16|F17:side:l64": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k16|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k9|F17:side:l57": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F17:side:k9|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l57": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l57|F17:side:l61": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l57|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l58": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l58|F17:side:l59": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l58|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l59": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l59|F17:side:l60": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l59|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l60": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l60|F17:side:l61": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l60|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l61": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l61|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l62": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l62|F17:side:l63": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l62|F17:side:l64": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l62|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l63": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l63|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l64": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l64|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l65": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l65|F17:side:l66": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l65|F17:side:l68": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l65|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l66": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l66|F17:side:l67": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l66|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l67": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l67|F17:side:l68": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l67|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l68": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l68|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l69": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l69|F17:side:l70": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l69|F17:side:l72": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l69|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l70": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l70|F17:side:l71": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l70|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l71": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l71|F17:side:l72": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l71|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l72": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l72|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l73": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l73|F17:side:l74": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l73|F17:side:l75": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l73|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:l73,F17:side:l74,F17:side:l75]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l74": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l74|F17:side:l75": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l74|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:l73,F17:side:l74,F17:side:l75]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l75": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l75|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:l73,F17:side:l74,F17:side:l75]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l76": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l76|F17:side:l77": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l76|F17:side:l86": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l76|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l77": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l77|F17:side:l78": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l77|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l78": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l78|F17:side:l79": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l78|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l79": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l79|F17:side:l80": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l79|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l80": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l80|F17:side:l81": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l80|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l81": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l81|F17:side:l82": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l81|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l82": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l82|F17:side:l83": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l82|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l83": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l83|F17:side:l84": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l83|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l84": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l84|F17:side:l85": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l84|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l85": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l85|F17:side:l86": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l85|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l86": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l86|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F2:side:l1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F5:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l3|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F5:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4|F5:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit !face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:l73,F17:side:l74,F17:side:l75]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F7:side:[email protected]]": "face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F7:side:[email protected]]": "face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F7:side:[email protected]]": "face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F7:side:c2]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l2|F2:top": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F7:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F7:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F7:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F7:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Body1/F7:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Body1/F7:side:[email protected]#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F7:side:[email protected]#2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F7:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F10:side:l11 & F10:side:l12 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l11 & F10:side:l12 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l11 & F10:side:l14 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l11 & F10:side:l14 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l12 & F10:side:l13 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l12 & F10:side:l13 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l13 & F10:side:l14 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l13 & F10:side:l14 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l17 & F10:side:l18 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l17 & F10:side:l18 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l17 & F10:side:l20 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l17 & F10:side:l20 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F10:side:l18 & F10:side:l19 & F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l18 & F10:side:l19 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l19 & F10:side:l20 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l19 & F10:side:l20 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l5 & F10:side:l6 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l5 & F10:side:l6 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l5 & F10:side:l8 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l5 & F10:side:l8 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l6 & F10:side:l7 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l6 & F10:side:l7 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l7 & F10:side:l8 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l7 & F10:side:l8 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F12:side:l5 & F12:side:l6 & F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F12:side:l5 & F12:side:l6 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l5 & F12:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F12:side:l5 & F12:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l6 & F12:side:l7 & F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F12:side:l6 & F12:side:l7 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l7 & F12:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l7 & F12:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5 & F14:side:l6 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5 & F14:side:l6 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5 & F14:side:l8 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5 & F14:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6 & F14:side:l7 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6 & F14:side:l7 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l7 & F14:side:l8 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l7 & F14:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:[email protected] & F14:side:[email protected] & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k10 & F17:side:k11]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k10 & F17:side:k9]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k11 & F17:side:k12]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k12 & F17:side:l58]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k13 & F17:side:k14]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k13 & F17:side:l63]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k14 & F17:side:k15]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k15 & F17:side:k16]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k16 & F17:side:l64]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k9 & F17:side:l57]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l57 & F17:side:l61]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l58 & F17:side:l59]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l59 & F17:side:l60]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l60 & F17:side:l61]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l62 & F17:side:l63]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l62 & F17:side:l64]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l65 & F17:side:l66]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l65 & F17:side:l68]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l66 & F17:side:l67]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l67 & F17:side:l68]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l69 & F17:side:l70]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l69 & F17:side:l72]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l70 & F17:side:l71]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l71 & F17:side:l72]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l73 & F17:side:l74]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l73 & F17:side:l75]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l74 & F17:side:l75]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l76 & F17:side:l77]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l76 & F17:side:l86]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l77 & F17:side:l78]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l78 & F17:side:l79]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l79 & F17:side:l80]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l80 & F17:side:l81]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l81 & F17:side:l82]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l82 & F17:side:l83]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l83 & F17:side:l84]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l84 & F17:side:l85]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l85 & F17:side:l86]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k10 & F17:side:k11 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:side:k10 & F17:side:k9 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:side:k11 & F17:side:k12 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k12 & F17:side:l58 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k13 & F17:side:k14 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k13 & F17:side:l63 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k14 & F17:side:k15 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k15 & F17:side:k16 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:side:k16 & F17:side:l64 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k9 & F17:side:l57 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]#[F14:side:l5,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l6,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l7,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:l8,F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F14:side:[email protected],F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:[email protected],F7:side:[email protected],F7:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"examples/bracket": {
"Bracket/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Bracket/F2:bottom|F2:side:a": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:b": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:c": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:d": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:e": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:f": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Bracket/F2:bottom|F3:blend:F2:side:b|F2:side:c": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:a": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Bracket/F2:side:a|F2:side:b": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:a|F2:side:f": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:a|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:b": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Bracket/F2:side:b|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Bracket/F2:side:b|F3:blend:F2:side:b|F2:side:c": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:c": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:c|F2:side:d": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:c|F2:start": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Bracket/F2:side:c|F3:blend:F2:side:b|F2:side:c": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:d": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:d|F2:side:e": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:d|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Bracket/F2:side:e": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:e|F2:side:f": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:e|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:f": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Bracket/F2:side:f|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:start|F3:blend:F2:side:b|F2:side:c": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F3:blend:F2:side:b|F2:side:c": "curved.axis curved.tangent_plane",
"Bracket/body": "body.copy body.mirror body.move body.pattern",
"Bracket/v[F2:bottom & F2:side:a & F2:side:b]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Bracket/v[F2:bottom & F2:side:a & F2:side:f]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:b & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:c & F2:side:d]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:c & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Bracket/v[F2:bottom & F2:side:d & F2:side:e]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:e & F2:side:f]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:a & F2:side:b & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:a & F2:side:f & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Bracket/v[F2:side:b & F2:start & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:c & F2:side:d & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:c & F2:start & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:d & F2:side:e & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Bracket/v[F2:side:e & F2:side:f & F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"examples/sensor_enclosure": {
"Case/F11:side:bs#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#2": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#3": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#4": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#[F11:top]#1": "curved.axis curved.tangent_plane",
"Case/F11:side:bs#[F11:top]#1|F11:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs#[F11:top]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs#[F11:top]#2|F11:top": "edge.chamfer !edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs#[F4:inner:F2:start]#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs_hole#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#[F11:top]#1": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F11:top]#1|F11:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F11:side:bs_hole#[F11:top]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F11:top]#2|F11:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:top": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:103": "curved.axis curved.tangent_plane",
"Case/F12:face:103|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:104": "curved.axis curved.tangent_plane",
"Case/F12:face:104|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:105": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:105|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:106": "curved.axis curved.tangent_plane",
"Case/F12:face:106|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F12:face:107": "curved.axis curved.tangent_plane",
"Case/F12:face:107|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:108": "curved.axis curved.tangent_plane",
"Case/F12:face:108|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:109": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:109|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:110": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:110|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:111": "curved.axis curved.tangent_plane",
"Case/F12:face:111|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F12:face:112": "curved.axis curved.tangent_plane",
"Case/F12:face:112|F12:face:149": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F12:face:113": "curved.axis curved.tangent_plane",
"Case/F12:face:113|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F12:face:114": "curved.axis curved.tangent_plane",
"Case/F12:face:114|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:147": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:148": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:149": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
"Case/F12:face:28": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:28|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:29": "curved.axis curved.tangent_plane",
"Case/F12:face:29|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:30": "curved.axis curved.tangent_plane",
"Case/F12:face:30|F4:inner:F2:start#[F12:face:30,F12:face:31]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:31": "curved.axis curved.tangent_plane",
"Case/F12:face:31|F4:inner:F2:start#[F12:face:30,F12:face:31]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:32": "curved.axis curved.tangent_plane",
"Case/F12:face:32|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F12:face:33": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:33|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:34": "curved.axis curved.tangent_plane",
"Case/F12:face:34|F4:inner:F2:start#[F12:face:34,F12:face:35]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:35": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:35|F4:inner:F2:start#[F12:face:34,F12:face:35]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F12:face:36": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:36|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F12:face:37": "curved.axis curved.tangent_plane",
"Case/F12:face:37|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:38": "curved.axis curved.tangent_plane",
"Case/F12:face:38|F4:inner:F2:start#[F12:face:38,F12:face:39]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:39": "curved.axis curved.tangent_plane",
"Case/F12:face:39|F4:inner:F2:start#[F12:face:38,F12:face:39]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:52": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:53": "curved.axis curved.tangent_plane",
"Case/F12:face:54": "curved.axis curved.tangent_plane",
"Case/F12:face:55": "curved.axis curved.tangent_plane",
"Case/F12:face:56": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:57": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:58": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:59": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:60": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:61": "curved.axis curved.tangent_plane",
"Case/F12:face:62": "curved.axis curved.tangent_plane",
"Case/F12:face:63": "curved.axis curved.tangent_plane",
"Case/F12:face:76": "curved.axis curved.tangent_plane",
"Case/F12:face:77": "curved.axis curved.tangent_plane",
"Case/F12:face:78": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:79": "curved.axis curved.tangent_plane",
"Case/F12:face:80": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:81": "curved.axis curved.tangent_plane",
"Case/F12:face:82": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:83": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:84": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:85": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:86": "curved.axis curved.tangent_plane",
"Case/F12:face:87": "curved.axis curved.tangent_plane",
"Case/F16:arm:base": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Case/F16:arm:base|F16:arm:side:1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:base|F16:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:base|F16:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F16:arm:base|F16:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F16:arm:base|F16:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:base|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F16:arm:side:1|F16:arm:side:2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:1|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:1|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F16:arm:side:2|F16:arm:side:3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:2|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Case/F16:arm:side:3|F16:arm:side:4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:3|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F16:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Case/F16:arm:side:4|F16:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:4|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Case/F16:arm:side:5|F16:arm:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:5|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Case/F16:arm:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l1|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Case/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F2:side:l4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F2:start|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F2:start|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:start|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:start|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F2:top|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "curved.axis curved.tangent_plane",
"Case/F4:inner:F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l1|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F9:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l1|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l2|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l3|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l4|F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:so#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:so#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs_hole]": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Case/F4:inner:F2:start#[F12:face:30,F12:face:31]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F12:face:34,F12:face:35]": "face.extrude !face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F12:face:38,F12:face:39]": "face.extrude !face.hole !face.hole+edit face.midplane !face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:[email protected]]": "face.extrude face.extrude+edit !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:[email protected]]|F6:side:[email protected]#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:so_hole]|F6:side:so_hole#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole]|F6:side:so_hole#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
"Case/F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
"Case/F6:side:so#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:so_hole#1|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F6:side:so_hole#2|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#1|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:[email protected]#2|F6:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F9:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F9:side:l1|F9:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F9:side:l2|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F9:side:l3|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Case/v[F11:side:bs#[F11:top]#1 & F11:side:bs#[F11:top]#2 & F11:top]": "vertex.point vertex.point+edit",
"Case/v[F11:side:bs#[F11:top]#1 & F11:side:bs#[F11:top]#2 & F11:top] (2)": "vertex.point",
"Case/v[F11:side:bs#[F4:inner:F2:start]#1 & F11:side:bs#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
"Case/v[F11:side:bs#[F4:inner:F2:start]#1 & F11:side:bs#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
"Case/v[F11:side:bs_hole#[F11:top]#1 & F11:side:bs_hole#[F11:top]#2 & F11:top]": "vertex.point vertex.point+edit",
"Case/v[F11:side:bs_hole#[F11:top]#1 & F11:side:bs_hole#[F11:top]#2 & F11:top] (2)": "vertex.point",
"Case/v[F11:side:bs_hole#[F4:inner:F2:start]#1 & F11:side:bs_hole#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs_hole]]": "vertex.point",
"Case/v[F11:side:bs_hole#[F4:inner:F2:start]#1 & F11:side:bs_hole#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs_hole]] (2)": "vertex.point vertex.point+edit",
"Case/v[F12:face:103 & F12:face:104 & F12:face:147]": "vertex.point",
"Case/v[F12:face:103 & F12:face:104 & F12:face:147] (2)": "vertex.point",
"Case/v[F12:face:105 & F12:face:106 & F12:face:147]": "vertex.point",
"Case/v[F12:face:105 & F12:face:106 & F12:face:147] (2)": "vertex.point",
"Case/v[F12:face:107 & F12:face:108 & F12:face:148]": "vertex.point",
"Case/v[F12:face:107 & F12:face:108 & F12:face:148] (2)": "vertex.point",
"Case/v[F12:face:109 & F12:face:110 & F12:face:148]": "vertex.point",
"Case/v[F12:face:109 & F12:face:110 & F12:face:148] (2)": "vertex.point",
"Case/v[F12:face:111 & F12:face:112 & F12:face:149]": "vertex.point",
"Case/v[F12:face:111 & F12:face:112 & F12:face:149] (2)": "vertex.point",
"Case/v[F12:face:113 & F12:face:114 & F12:face:149]": "vertex.point",
"Case/v[F12:face:113 & F12:face:114 & F12:face:149] (2)": "vertex.point",
"Case/v[F12:face:28 & F12:face:29 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
"Case/v[F12:face:28 & F12:face:29 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
"Case/v[F12:face:30 & F12:face:31 & F4:inner:F2:start#[F12:face:30,F12:face:31]]": "vertex.point",
"Case/v[F12:face:30 & F12:face:31 & F4:inner:F2:start#[F12:face:30,F12:face:31]] (2)": "vertex.point",
"Case/v[F12:face:32 & F12:face:33 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
"Case/v[F12:face:32 & F12:face:33 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
"Case/v[F12:face:34 & F12:face:35 & F4:inner:F2:start#[F12:face:34,F12:face:35]]": "vertex.point",
"Case/v[F12:face:34 & F12:face:35 & F4:inner:F2:start#[F12:face:34,F12:face:35]] (2)": "vertex.point",
"Case/v[F12:face:36 & F12:face:37 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]]": "vertex.point",
"Case/v[F12:face:36 & F12:face:37 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]]] (2)": "vertex.point",
"Case/v[F12:face:38 & F12:face:39 & F4:inner:F2:start#[F12:face:38,F12:face:39]]": "vertex.point",
"Case/v[F12:face:38 & F12:face:39 & F4:inner:F2:start#[F12:face:38,F12:face:39]] (2)": "vertex.point",
"Case/v[F16:arm:base & F16:arm:side:1 & F16:arm:side:2]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:1 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F16:arm:base & F16:arm:side:2 & F16:arm:side:3]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:3 & F16:arm:side:4]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:4 & F16:arm:side:5]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:5 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:1 & F16:arm:side:2 & F16:arm:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F16:arm:side:1 & F16:arm:top & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:2 & F16:arm:side:3 & F16:arm:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F16:arm:side:3 & F16:arm:side:4 & F16:arm:top]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:4 & F16:arm:side:5 & F16:arm:top]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:5 & F16:arm:top & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#4]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#4 & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#2 & F3:blend:F2:side:l1|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#3 & F3:blend:F2:side:l1|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#4 & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:side:l1 & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l1 & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l1 & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l1 & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#4]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#4 & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#2]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#2 & F3:blend:F2:side:l2|F2:side:l3#3]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#3 & F3:blend:F2:side:l2|F2:side:l3#4]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#4 & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.point",
"Case/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#2]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#2 & F3:blend:F2:side:l2|F2:side:l3#3]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#3 & F3:blend:F2:side:l2|F2:side:l3#4]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#4 & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#2 & F3:blend:F2:side:l3|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#3 & F3:blend:F2:side:l3|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#4 & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.point vertex.point+edit",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#2 & F3:blend:F2:side:l1|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#3 & F3:blend:F2:side:l1|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#4 & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#2 & F3:blend:F2:side:l3|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#3 & F3:blend:F2:side:l3|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#4 & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]] & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F11:side:bs,F12:face:28,F12:face:29,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:[email protected],F6:side:[email protected],F6:side:[email protected]] & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#2 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
"Lid/F14:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Lid/F14:side:l1|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l1|F15:blend:F14:side:l1|F14:side:l2": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l1|F15:blend:F14:side:l1|F14:side:l4": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Lid/F14:side:l2|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l2|F15:blend:F14:side:l1|F14:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Lid/F14:side:l2|F15:blend:F14:side:l2|F14:side:l3": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Lid/F14:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Lid/F14:side:l3|F14:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:side:l3|F15:blend:F14:side:l2|F14:side:l3": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l3|F15:blend:F14:side:l3|F14:side:l4": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F14:side:l4|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l4|F15:blend:F14:side:l1|F14:side:l4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Lid/F14:side:l4|F15:blend:F14:side:l3|F14:side:l4": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell !face.shell+edit face.sketch face.sketch+edit",
"Lid/F14:start|F18:side:a17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F18:side:a18": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F18:side:a19": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F18:side:a20": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F18:side:l17": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F18:side:l18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F18:side:l19": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F14:start|F18:side:l20": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:start|F20:side:ls#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:top": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F14:top|F15:blend:F14:side:l1|F14:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F15:blend:F14:side:l1|F14:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F15:blend:F14:side:l2|F14:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:top|F15:blend:F14:side:l3|F14:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:[email protected]#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:[email protected]#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:top|F20:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F15:blend:F14:side:l1|F14:side:l2": "curved.axis curved.tangent_plane",
"Lid/F15:blend:F14:side:l1|F14:side:l2|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F15:blend:F14:side:l1|F14:side:l4": "curved.axis curved.tangent_plane",
"Lid/F15:blend:F14:side:l1|F14:side:l4|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F15:blend:F14:side:l2|F14:side:l3": "curved.axis curved.axis+edit curved.tangent_plane",
"Lid/F15:blend:F14:side:l2|F14:side:l3|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F15:blend:F14:side:l3|F14:side:l4": "curved.axis curved.tangent_plane",
"Lid/F15:blend:F14:side:l3|F14:side:l4|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F18:side:a13": "curved.axis curved.tangent_plane",
"Lid/F18:side:a13|F18:side:l13": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a13|F18:side:l14": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Lid/F18:side:a13|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a13|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a14": "curved.axis curved.tangent_plane",
"Lid/F18:side:a14|F18:side:l14": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a14|F18:side:l15": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a14|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a14|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a15": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F18:side:a15|F18:side:l15": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a15|F18:side:l16": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a15|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a15|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a16": "curved.axis curved.axis+edit curved.tangent_plane",
"Lid/F18:side:a16|F18:side:l13": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a16|F18:side:l16": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a16|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a16|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a17": "curved.axis curved.tangent_plane",
"Lid/F18:side:a17|F18:side:l17": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a17|F18:side:l18": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a17|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a18": "curved.axis curved.tangent_plane",
"Lid/F18:side:a18|F18:side:l18": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a18|F18:side:l19": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Lid/F18:side:a18|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a19": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F18:side:a19|F18:side:l19": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a19|F18:side:l20": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a19|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a20": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F18:side:a20|F18:side:l17": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a20|F18:side:l20": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a20|F18:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F18:side:l13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Lid/F18:side:l13|F18:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l13|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:l14": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l14|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l14|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l15|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l15|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l16": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Lid/F18:side:l16|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:l16|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l17": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l17|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l18": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch face.sketch+edit",
"Lid/F18:side:l18|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:l19": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l19|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l20": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l20|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Lid/F20:side:ls#1": "!curved.axis curved.tangent_plane",
"Lid/F20:side:ls#2": "!curved.axis curved.tangent_plane",
"Lid/F20:side:[email protected]#1": "!curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F20:side:[email protected]#2": "!curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F20:side:[email protected]#1": "!curved.axis curved.tangent_plane",
"Lid/F20:side:[email protected]#2": "!curved.axis curved.tangent_plane",
"Lid/F20:side:[email protected]#1": "!curved.axis curved.tangent_plane",
"Lid/F20:side:[email protected]#2": "!curved.axis curved.tangent_plane",
"Lid/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch face.sketch+edit",
"Lid/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Lid/v[F14:side:l1 & F14:top & F15:blend:F14:side:l1|F14:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l1 & F14:top & F15:blend:F14:side:l1|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l1 & F15:blend:F14:side:l1|F14:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l1 & F15:blend:F14:side:l1|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l2 & F14:top & F15:blend:F14:side:l1|F14:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l2 & F14:top & F15:blend:F14:side:l2|F14:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l2 & F15:blend:F14:side:l1|F14:side:l2 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F14:side:l2 & F15:blend:F14:side:l2|F14:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l3 & F14:top & F15:blend:F14:side:l2|F14:side:l3]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l3 & F14:top & F15:blend:F14:side:l3|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l3 & F15:blend:F14:side:l2|F14:side:l3 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l3 & F15:blend:F14:side:l3|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l4 & F14:top & F15:blend:F14:side:l1|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l4 & F14:top & F15:blend:F14:side:l3|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l4 & F15:blend:F14:side:l1|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l4 & F15:blend:F14:side:l3|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F14:start & F18:side:a17 & F18:side:l17]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:start & F18:side:a17 & F18:side:l18]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a18 & F18:side:l18]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a18 & F18:side:l19]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a19 & F18:side:l19]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a19 & F18:side:l20]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a20 & F18:side:l17]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:start & F18:side:a20 & F18:side:l20]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F20:side:ls#1 & F20:side:ls#2]": "vertex.point",
"Lid/v[F14:start & F20:side:ls#1 & F20:side:ls#2] (2)": "vertex.point",
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
"Lid/v[F14:start & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point vertex.point+edit",
"Lid/v[F14:top & F20:side:ls#1 & F20:side:ls#2]": "vertex.point",
"Lid/v[F14:top & F20:side:ls#1 & F20:side:ls#2] (2)": "vertex.point",
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point vertex.point+edit",
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2]": "vertex.point",
"Lid/v[F14:top & F20:side:[email protected]#1 & F20:side:[email protected]#2] (2)": "vertex.point",
"Lid/v[F18:side:a13 & F18:side:l13 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a13 & F18:side:l13 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a13 & F18:side:l14 & F18:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F18:side:a13 & F18:side:l14 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a14 & F18:side:l14 & F18:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a14 & F18:side:l14 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F18:side:a14 & F18:side:l15 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a14 & F18:side:l15 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a15 & F18:side:l15 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a15 & F18:side:l15 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a15 & F18:side:l16 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a15 & F18:side:l16 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a16 & F18:side:l13 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a16 & F18:side:l13 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a16 & F18:side:l16 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a16 & F18:side:l16 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F18:side:a17 & F18:side:l17 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a17 & F18:side:l18 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a18 & F18:side:l18 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a18 & F18:side:l19 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a19 & F18:side:l19 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a19 & F18:side:l20 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a20 & F18:side:l17 & F18:top]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a20 & F18:side:l20 & F18:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/01-box": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/02-cylinder": {
"Cylinder/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Cylinder/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Cylinder/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Cylinder/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Cylinder/body": "body.copy body.mirror body.move body.pattern",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"design": "load"
},
"oracle/03-box-through-hole": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Box/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Box/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Box/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Box/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"oracle/04-revolve-vase": {
"Vase/F2:side:a1#1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#1|F2:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#2|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#2|F2:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#3|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#3|F2:side:l3#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Vase/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Vase/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Vase/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#1": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l3#2": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#2|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l3#3": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l4": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Vase/body": "body.copy body.mirror body.move body.pattern",
"Vase/v[F2:side:a1#1 & F2:side:a1#2 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#1 & F2:side:a1#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#1 & F2:side:a1#3 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#1 & F2:side:a1#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#2 & F2:side:a1#3 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#2 & F2:side:a1#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/05-taper-extrude": {
"Frustum/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/body": "body.copy body.mirror body.move body.pattern",
"Frustum/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/06-symmetric-extrude": {
"Block/F2:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/07-fillet-all-edges": {
"Box/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]|F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l4|F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:start": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]|F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/08-chamfer": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l2|F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l3|F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/09-shell": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4]": "vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/10-rect-pattern-holes": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"design": "load"
},
"oracle/11-circular-pattern-flange": {
"Flange/F2:side:c_in#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_in#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_in#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_in#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_in#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_in#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_out#1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_out#2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/body": "body.copy body.mirror body.move body.pattern",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start]": "vertex.point",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start] (2)": "vertex.point",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top]": "vertex.point",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top] (2)": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start]": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start] (2)": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top]": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"design": "load"
},
"oracle/12-mirror-feature": {
"Base/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Base/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Base/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Base/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Base/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F4:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/body": "body.copy body.mirror body.move body.pattern",
"Base/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Base/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Base/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Base/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Base/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Base/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Base/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
"Base/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
"design": "load"
},
"oracle/13-combine-join": {
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l1|F2:side:l2#[F2:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2#[F2:side:l1]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l1]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l1]|F4:side:c1#2#[F2:side:l2,F2:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2#[F2:side:l3]|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]|F4:side:c1#1#[F2:side:l2,F2:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start|F4:side:c1#1#[F2:side:l2,F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:c1#2#[F2:side:l2,F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:top|F4:side:c1#1#[F2:top,F4:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:top|F4:side:c1#2#[F2:top,F4:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#1#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#1#[F2:top,F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#1#[F2:top,F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#1#[F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#1#[F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#2#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#2#[F2:top,F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#2#[F2:top,F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#2#[F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#2#[F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:side:l1 & F2:side:l2#[F2:side:l1] & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l2#[F2:side:l1] & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l1] & F2:start & F4:side:c1#2#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l1] & F2:top & F4:side:c1#2#[F2:side:l2,F2:start] & F4:side:c1#2#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:start & F4:side:c1#1#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:top & F4:side:c1#1#[F2:side:l2,F2:start] & F4:side:c1#1#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:c1#1#[F2:side:l2,F2:start] & F4:side:c1#2#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
"A/v[F2:top & F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#2#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#1#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#2#[F2:top,F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#1#[F4:top] & F4:side:c1#2#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#2#[F2:top,F4:top] & F4:side:c1#2#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/14-combine-cut": {
"A/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start|F4:side:a1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:a1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:a1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:a1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F4:side:a1#1": "curved.tangent_plane",
"A/F4:side:a1#2": "curved.tangent_plane",
"A/F4:side:a1#3": "curved.tangent_plane",
"A/F4:side:a1#4": "curved.tangent_plane",
"A/F4:side:a1#6": "curved.tangent_plane",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#1 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#1 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#2 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#2 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/15-combine-intersect": {
"A/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:bottom|F4:side:a1#6~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F4:side:a1#6~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l1|F4:side:a1#4~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F4:side:a1#4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l2|F4:side:a1#1~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2|F4:side:a1#1~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l3|F4:side:a1#3~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F4:side:a1#3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l4|F4:side:a1#2~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4|F4:side:a1#2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:top|F4:side:a1#5~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:top|F4:side:a1#5~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:a1#1": "curved.tangent_plane",
"A/F4:side:a1#3": "curved.tangent_plane",
"A/F4:side:a1#4": "curved.tangent_plane",
"A/F4:side:a1#5": "curved.tangent_plane",
"A/F4:side:a1#6": "curved.tangent_plane",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:bottom & F4:side:a1#6]": "vertex.point",
"A/v[F2:bottom & F4:side:a1#6] (2)": "vertex.point",
"A/v[F2:side:l1 & F4:side:a1#4]": "vertex.point",
"A/v[F2:side:l1 & F4:side:a1#4] (2)": "vertex.point",
"A/v[F2:side:l2 & F4:side:a1#1]": "vertex.point",
"A/v[F2:side:l2 & F4:side:a1#1] (2)": "vertex.point",
"A/v[F2:side:l3 & F4:side:a1#3]": "vertex.point",
"A/v[F2:side:l3 & F4:side:a1#3] (2)": "vertex.point",
"A/v[F2:side:l4 & F4:side:a1#2]": "vertex.point",
"A/v[F2:side:l4 & F4:side:a1#2] (2)": "vertex.point",
"A/v[F2:top & F4:side:a1#5]": "vertex.point",
"A/v[F2:top & F4:side:a1#5] (2)": "vertex.point",
"design": "load"
},
"oracle/16-sweep": {
"Tube/F3:end": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tube/F3:end|F3:side:c1#[F3:end]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:end|F3:side:c1#[F3:end]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:side:c1#1": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#1|F3:side:c1#[F3:start]#2": "edge.normal_plane edge.project",
"Tube/F3:side:c1#2": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#2|F3:side:c1#[F3:start]#1": "edge.normal_plane edge.project",
"Tube/F3:side:c1#3": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#3|F3:side:c1#[F3:end]#2": "edge.normal_plane edge.project",
"Tube/F3:side:c1#4": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#4|F3:side:c1#[F3:end]#1": "edge.normal_plane edge.project",
"Tube/F3:side:c1#[F3:end]#1": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:end]#2": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:start]#1": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:start]#1|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:side:c1#[F3:start]#2": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:start]#2|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:start": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tube/body": "body.copy body.mirror body.move body.pattern",
"Tube/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Tube/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
"Tube/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.point",
"Tube/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2] (2)": "vertex.point",
"Tube/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Tube/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
"Tube/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start]": "vertex.point",
"Tube/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start] (2)": "vertex.point",
"design": "load"
},
"oracle/17-loft": {
"Loft/F4:end": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/F4:end|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/body": "body.copy body.mirror body.move body.pattern",
"Loft/v[F4:end & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/18-hole-features": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F3:bore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F3:bore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F3:cbore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:csink:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:csink:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F5:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F5:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F5:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:0": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:0|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:cbore:base": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F3:cbore:base|F3:cbore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:cbore:base|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:cbore:side:0": "curved.axis curved.tangent_plane",
"Plate/F3:cbore:side:1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0|F4:csink:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0|F4:csink:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1|F4:csink:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1|F4:csink:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:csink:side:0": "curved.axis curved.tangent_plane",
"Plate/F4:csink:side:1": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#1|F5:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F5:bore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#2|F5:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F5:bore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#3|F5:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F5:bore:side:2#1": "!curved.axis !curved.tangent_plane",
"Plate/F5:bore:side:2#2": "!curved.axis !curved.tangent_plane",
"Plate/F5:bore:side:2#3": "!curved.axis !curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F3:bore:side:0 & F3:bore:side:1]": "vertex.point",
"Plate/v[F2:start & F3:bore:side:0 & F3:bore:side:1] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0 & F4:bore:side:1]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0 & F4:bore:side:1] (2)": "vertex.point",
"Plate/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Plate/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Plate/v[F2:top & F4:csink:side:0 & F4:csink:side:1]": "vertex.point",
"Plate/v[F2:top & F4:csink:side:0 & F4:csink:side:1] (2)": "vertex.point",
"Plate/v[F2:top & F5:bore:side:1#1 & F5:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F5:bore:side:1#1 & F5:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F5:bore:side:1#2 & F5:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base]": "vertex.point",
"Plate/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base] (2)": "vertex.point",
"Plate/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Plate/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Plate/v[F4:bore:side:0 & F4:bore:side:1 & F4:csink:side:0]": "vertex.plane_three_points vertex.point",
"Plate/v[F4:bore:side:0 & F4:bore:side:1 & F4:csink:side:1]": "vertex.plane_three_points vertex.point",
"Plate/v[F4:bore:side:0 & F4:csink:side:0 & F4:csink:side:1]": "vertex.plane_three_points vertex.point",
"Plate/v[F4:bore:side:1 & F4:csink:side:0 & F4:csink:side:1]": "vertex.plane_three_points vertex.point",
"Plate/v[F5:bore:side:1#1 & F5:bore:side:1#2 & F5:bore:side:2#1 & F5:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F5:bore:side:1#1 & F5:bore:side:1#3 & F5:bore:side:2#1 & F5:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F5:bore:side:1#2 & F5:bore:side:1#3 & F5:bore:side:2#2 & F5:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/19-l-bracket-constrained": {
"LBracket/F2:side:l1": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"LBracket/F2:side:l1|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"LBracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"LBracket/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"LBracket/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"LBracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"LBracket/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"LBracket/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"LBracket/F2:side:l4": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:side:l4|F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"LBracket/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l4|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"LBracket/F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"LBracket/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"LBracket/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:top": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"LBracket/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"LBracket/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"LBracket/v[F2:side:l1 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l1 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l4 & F2:side:l5 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l4 & F2:side:l5 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"LBracket/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/20-slot-constrained": {
"Slot/F2:side:a1": "curved.axis curved.tangent_plane",
"Slot/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:a2": "curved.axis curved.tangent_plane",
"Slot/F2:side:a2|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a2|F2:side:l2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Slot/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:side:a2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Slot/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Slot/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Slot/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Slot/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Slot/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/21-draft": {
"Box/F2:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/22-split-body": {
"Cyl (1)/F2:bottom": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl (1)/F2:bottom|F2:side:c1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F2:bottom|F4:face:2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F2:side:c1": "curved.axis curved.tangent_plane",
"Cyl (1)/F2:side:c1|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F4:face:2": "curved.axis curved.tangent_plane",
"Cyl (1)/F4:face:2|F4:face:3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F4:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl (1)/body": "body.copy body.mirror body.move body.pattern",
"Cyl (1)/v[F2:bottom & F2:side:c1 & F4:face:2]": "vertex.point",
"Cyl (1)/v[F2:bottom & F2:side:c1 & F4:face:2] (2)": "vertex.point",
"Cyl (1)/v[F2:side:c1 & F4:face:2 & F4:face:3]": "vertex.point",
"Cyl (1)/v[F2:side:c1 & F4:face:2 & F4:face:3] (2)": "vertex.point",
"Cyl/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F4:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Cyl/F2:top": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl/F4:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl/body": "body.copy body.mirror body.move body.pattern",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F4:face:3]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F4:face:3] (2)": "vertex.point",
"design": "load"
},
"oracle/23-bracket-multifeature": {
"Bracket/F10:side:c1#1": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c1#2": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#1": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#2": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#1": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c1#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#2": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c1#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#2|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#1": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#2": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#2|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:top|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:top|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:top|F8:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.axis edge.normal_plane edge.project",
"Bracket/F4:side:l1|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.axis edge.normal_plane edge.project",
"Bracket/F4:side:l1|F8:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "curved.axis curved.tangent_plane",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]|F8:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "curved.axis curved.tangent_plane",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]|F8:bottom": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F8:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F8:bottom|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F8:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Bracket/F8:side:l2|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F8:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/body": "body.copy body.mirror body.move body.pattern",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:start]": "vertex.point",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:start] (2)": "vertex.point",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:top]": "vertex.point",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:top] (2)": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:start]": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:start] (2)": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:top]": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:top] (2)": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F2:side:l3]": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F2:side:l3] (2)": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F4:side:l1]": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F4:side:l1] (2)": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F2:side:l3]": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F2:side:l3] (2)": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F4:side:l1]": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F4:side:l1] (2)": "vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F4:side:l1 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l4 & F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l4 & F4:side:l1 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l4 & F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top] & F8:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom] & F8:bottom]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F8:bottom & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F8:side:l2 & F8:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top] & F8:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom] & F8:bottom]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F8:bottom & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F8:side:l2 & F8:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/24-user-parameters": {
"Block/F2:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Block/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Block/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point vertex.point+edit",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"oracle/25-sketch-triangle": {
"Triangle/F2:side:l1": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Triangle/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Triangle/F2:side:l1|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Triangle/F2:side:l2": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Triangle/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l2|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Triangle/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Triangle/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Triangle/F2:top": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Triangle/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Triangle/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"design": "load"
},
"oracle/26-sketch-belt": {
"Belt/F2:side:c1": "curved.axis curved.tangent_plane",
"Belt/F2:side:c1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Belt/F2:side:c1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Belt/F2:side:c1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Belt/F2:side:c1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Belt/F2:side:c2|F2:side:l1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Belt/F2:side:c2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Belt/F2:side:c2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c3#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Belt/F2:side:c3#1|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Belt/F2:side:c3#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c3#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Belt/F2:side:c3#2|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Belt/F2:side:c3#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Belt/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Belt/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Belt/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Belt/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Belt/body": "body.copy body.mirror body.move body.pattern",
"Belt/v[F2:side:c1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Belt/v[F2:side:c1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Belt/v[F2:side:c2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Belt/v[F2:side:c2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:start]": "vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:start] (2)": "vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:top]": "vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:top] (2)": "vertex.point",
"design": "load"
},
"oracle/27-sketch-trapezoid": {
"Trapezoid/F2:side:h1#1": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h1#1|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:h1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:h1#2": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h1#2|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:h1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:h2#1": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:h2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Trapezoid/F2:side:h2#2": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:h2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Trapezoid/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Trapezoid/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l4|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:start": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:start]": "vertex.point",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:start] (2)": "vertex.point",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:top]": "vertex.point",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:top] (2)": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:start]": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:start] (2)": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:top]": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:top] (2)": "vertex.point",
"Trapezoid/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Trapezoid/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Trapezoid/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/28-blind-pocket-fillets": {
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l1|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l1|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l2|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l3|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l1|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l1|F5:blend:F4:side:l1|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l1|F6:blend:F4:bottom|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l2|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l2|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l2|F6:blend:F4:bottom|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l3|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l3|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l3|F6:blend:F4:bottom|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l4|F5:blend:F4:side:l1|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l4|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l4|F6:blend:F4:bottom|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l1|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l1|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l1|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l2|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l3|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l1": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l1|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l1|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l2": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l3": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4 & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3 & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3 & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4 & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4 & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4 & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/29-two-sided-and-partial-revolve": {
"Block/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:end": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l2#[F2:top,F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l2#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l2#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l4#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l4#[F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2#[F2:top,F4:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2#[F2:top]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:end": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:end|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:end|F4:side:l2#[F4:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:end|F4:side:l4#[F4:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Block/F4:side:l1|F4:side:l2#[F2:top,F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l2#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l2#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l4#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l4#[F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l2#[F2:top,F4:start]": "curved.axis curved.tangent_plane",
"Block/F4:side:l2#[F2:top,F4:start]|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l2#[F2:top]": "curved.axis curved.tangent_plane",
"Block/F4:side:l2#[F4:end]": "curved.axis curved.tangent_plane",
"Block/F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F4:side:l4#[F4:end]": "curved.axis curved.tangent_plane",
"Block/F4:side:l4#[F4:start]": "curved.axis curved.tangent_plane",
"Block/F4:side:l4#[F4:start]|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:top & F4:side:l2#[F2:top,F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:top & F4:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:end & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:end & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l2#[F2:top,F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l2#[F2:top] & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l4 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l4 & F4:side:l4#[F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l4#[F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F4:side:l2#[F2:top,F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F4:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:end & F4:side:l1 & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:end & F4:side:l1 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l2#[F2:top,F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l2#[F2:top] & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l4 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l4 & F4:side:l4#[F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l4#[F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/30-fillet-after-shell": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F4:blend:F2:side:l1|F2:side:l2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:blend:F2:side:l1|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:blend:F2:side:l2|F2:side:l3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:blend:F2:side:l3|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Box/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l1|F2:side:l2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l1|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l2|F2:side:l3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l3|F2:side:l4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l1|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l2|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l3|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:side:l2~2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l1|F2:side:l4~2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l2|F2:side:l3~2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l3|F2:side:l4~2": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:start & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:start & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:top & F4:blend:F2:side:l1|F2:side:l2~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:top & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:top & F4:blend:F2:side:l2|F2:side:l3~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:top & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:top & F4:blend:F2:side:l1|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:top & F4:blend:F2:side:l3|F2:side:l4~2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2 & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2 & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3 & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3 & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/31-fillet-l-all-edges": {
"L/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2|F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3|F3:blend:F2:side:l3|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4|F3:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4|F3:blend:F2:side:l4|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l5|F3:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5|F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5|F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l6|F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6|F3:blend:F2:side:l6|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6|F3:blend:F2:side:l6|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"L/F2:start|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l3|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l4|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l6|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"L/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l6|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l2|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l2|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]|F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]|F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l1|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l6|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l6|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:side:l3|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:side:l3|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]|F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]|F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:side:l5": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:side:l5|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l4|F2:side:l5|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l4|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:start|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:top|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:side:l6": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:side:l6|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:side:l6|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l6|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l6|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l6|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l6|F2:top": "curved.axis curved.tangent_plane",
"L/body": "body.copy body.mirror body.move body.pattern",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l4|F2:start & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l4|F2:top & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l4|F2:start & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l4|F2:top & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/32-boss-plate-fillets": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Part/F2:top|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Part/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#1|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Part/F4:side:c1#1|F6:blend:F4:side:c1#1|F4:top": "edge.normal_plane edge.project",
"Part/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#2|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Part/F4:side:c1#2|F6:blend:F4:side:c1#2|F4:top": "edge.normal_plane edge.project",
"Part/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F4:top|F6:blend:F4:side:c1#1|F4:top": "edge.normal_plane edge.project",
"Part/F4:top|F6:blend:F4:side:c1#2|F4:top": "edge.normal_plane edge.project",
"Part/F5:blend:F2:top|F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F5:blend:F2:top|F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F6:blend:F4:side:c1#1|F4:top": "curved.axis curved.tangent_plane",
"Part/F6:blend:F4:side:c1#2|F4:top": "curved.axis curved.tangent_plane",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Part/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top]": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top] (2)": "vertex.point",
"Part/v[F4:top & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top]": "vertex.point",
"Part/v[F4:top & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top] (2)": "vertex.point",
"design": "load"
},
"oracle/33-fillet-tangent-chain": {
"Slot/F2:side:a1": "curved.axis curved.tangent_plane",
"Slot/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a1|F3:blend:F2:side:a1|F2:top": "edge.normal_plane edge.project",
"Slot/F2:side:a1|F4:blend:F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:a2": "curved.axis curved.tangent_plane",
"Slot/F2:side:a2|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a2|F3:blend:F2:side:a2|F2:top": "edge.normal_plane edge.project",
"Slot/F2:side:a2|F4:blend:F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:l1|F4:blend:F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Slot/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:l2|F4:blend:F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:start|F4:blend:F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start|F4:blend:F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Slot/F2:top|F3:blend:F2:side:a1|F2:top": "edge.normal_plane edge.project",
"Slot/F2:top|F3:blend:F2:side:a2|F2:top": "edge.normal_plane edge.project",
"Slot/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a1|F2:top": "curved.axis curved.tangent_plane",
"Slot/F3:blend:F2:side:a1|F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a1|F2:top|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a2|F2:top": "curved.axis curved.tangent_plane",
"Slot/F3:blend:F2:side:a2|F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a2|F2:top|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Slot/F3:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Slot/F4:blend:F2:side:a1|F2:start": "curved.axis curved.tangent_plane",
"Slot/F4:blend:F2:side:a1|F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:a1|F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:a2|F2:start": "curved.axis curved.tangent_plane",
"Slot/F4:blend:F2:side:a2|F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:a2|F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:l1|F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F4:blend:F2:side:l2|F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/body": "body.copy body.mirror body.move body.pattern",
"Slot/v[F2:side:a1 & F2:side:l1 & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l1 & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/34-chamfer-then-fillet": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l1|F2:side:l2|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l1|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l2|F2:side:l3|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l3|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/35-fillet-curved-curved": {
"Tee/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tee/F2:bottom|F2:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F2:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1|F5:blend:F2:side:c1#1|F4:side:c1#1": "edge.normal_plane edge.project",
"Tee/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#2|F5:blend:F2:side:c1#2|F4:side:c1#2": "edge.normal_plane edge.project",
"Tee/F2:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tee/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#1|F5:blend:F2:side:c1#1|F4:side:c1#1": "edge.normal_plane edge.project",
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#2|F5:blend:F2:side:c1#2|F4:side:c1#2": "edge.normal_plane edge.project",
"Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tee/body": "body.copy body.mirror body.move body.pattern",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2]": "vertex.point",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2] (2)": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2]": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"oracle/36-corner-blend-two-radii": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Box/F2:top|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l2|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:side:l3|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/37-pyramid-apex-blend": {
"Pyramid/F4:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:start": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l2|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l2|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l2|F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l3|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l3|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l3|F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l4|F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l4|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l4|F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:start|F5:blend:F4:side:l1|F4:start": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start|F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start|F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start|F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:side:l2|F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l2|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:start": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:start|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:start|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l2|F4:side:l3|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l3|F4:side:l4|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
"Pyramid/body": "body.copy body.mirror body.move body.pattern",
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4 & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4 & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/38-coincident-cylinders": {
"A/F2:side:c1#1": "curved.axis curved.tangent_plane",
"A/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:c1#1|F5:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:c1#2": "curved.axis curved.tangent_plane",
"A/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:c1#2|F5:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F5:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F5:top]": "vertex.point",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F5:top] (2)": "vertex.point",
"design": "load"
},
"oracle/39-tee-pipe": {
"Tee/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F2:bottom|F2:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F2:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F4:top|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:top|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F6:side:c1#1|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F6:side:c1#2|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F8:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F8:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/body": "body.copy body.mirror body.move body.pattern",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2]": "vertex.point",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:bottom & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Tee/v[F2:bottom & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Tee/v[F2:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Tee/v[F4:top & F8:side:c1#1 & F8:side:c1#2]": "vertex.point",
"Tee/v[F4:top & F8:side:c1#1 & F8:side:c1#2] (2)": "vertex.point",
"Tee/v[F6:side:c1#1 & F6:side:c1#2 & F8:side:c1#1 & F8:side:c1#2]": "vertex.point",
"Tee/v[F6:side:c1#1 & F6:side:c1#2 & F8:side:c1#1 & F8:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"oracle/40-box-sphere-torus": {
"A/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F4:side:a1#6~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F4:side:a1#6~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#6": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start#[F4:side:a1]|F4:side:a1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F4:side:a1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F4:side:a1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F4:side:a1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F7:side:c1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F7:side:c1#5": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F4:side:a1#1": "curved.tangent_plane",
"A/F4:side:a1#2": "curved.tangent_plane",
"A/F4:side:a1#3": "curved.tangent_plane",
"A/F4:side:a1#4": "curved.tangent_plane",
"A/F4:side:a1#5": "curved.tangent_plane",
"A/F4:side:a1#6": "curved.tangent_plane",
"A/F7:side:c1#1": "curved.axis curved.tangent_plane",
"A/F7:side:c1#2": "curved.axis curved.tangent_plane",
"A/F7:side:c1#3": "curved.axis curved.tangent_plane",
"A/F7:side:c1#4": "curved.axis curved.tangent_plane",
"A/F7:side:c1#5": "curved.axis curved.tangent_plane",
"A/F7:side:c1#6": "curved.axis curved.tangent_plane",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F4:side:a1#6]": "vertex.point",
"A/v[F2:bottom & F4:side:a1#6] (2)": "vertex.point",
"A/v[F2:side:l1 & F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2 & F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#2 & F7:side:c1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#2 & F7:side:c1#6]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#4 & F7:side:c1#6]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#1 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#1 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#2 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#2 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F7:side:c1#1 & F7:side:c1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F7:side:c1#1 & F7:side:c1#5]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F7:side:c1#3 & F7:side:c1#5]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/41-tube-radial-holes": {
"design": "load"
},
"oracle/42-overlapping-patterns": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell !face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#[F8:face:10]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#[F8:face:13]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:28": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:31": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:44": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:45": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:47": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:48": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:52": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:53": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:54": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:61": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:62": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:63": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F8:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell !face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#[F8:face:10]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#[F8:face:13]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:10": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:28": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:31": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:32": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:33": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:34": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:44": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:45": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:47": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:48": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:52": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:53": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:54": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:61": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:62": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:63": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F8:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#3": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]|F8:face:52": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1|F7:side:c1#1": "edge.axis edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2|F7:side:c1#2": "edge.axis edge.normal_plane edge.project",
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]|F8:face:63": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1|F7:side:c1#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2|F7:side:c1#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]|F8:face:24": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#[F8:face:10]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#[F8:face:10]|F8:face:10": "edge.axis edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#[F8:face:13]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#[F8:face:13]|F8:face:13": "edge.axis edge.normal_plane edge.project",
"Plate/F4:side:[email protected]": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]|F8:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F8:face:10": "curved.axis curved.tangent_plane",
"Plate/F8:face:10|F8:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:13": "curved.axis curved.tangent_plane",
"Plate/F8:face:13|F8:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:14": "curved.axis curved.tangent_plane",
"Plate/F8:face:22": "curved.axis curved.tangent_plane",
"Plate/F8:face:22|F8:face:23": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:23": "curved.axis curved.tangent_plane",
"Plate/F8:face:24": "curved.axis curved.tangent_plane",
"Plate/F8:face:25": "curved.axis curved.tangent_plane",
"Plate/F8:face:25|F8:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:27": "curved.axis curved.tangent_plane",
"Plate/F8:face:28": "curved.axis curved.tangent_plane",
"Plate/F8:face:31": "curved.axis curved.tangent_plane",
"Plate/F8:face:31|F8:face:32": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:32": "curved.axis curved.tangent_plane",
"Plate/F8:face:33": "curved.axis curved.tangent_plane",
"Plate/F8:face:33|F8:face:34": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:34": "curved.axis curved.tangent_plane",
"Plate/F8:face:44": "curved.axis curved.tangent_plane",
"Plate/F8:face:44|F8:face:45": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:45": "curved.axis curved.tangent_plane",
"Plate/F8:face:47": "curved.axis curved.tangent_plane",
"Plate/F8:face:47|F8:face:48": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:48": "curved.axis curved.tangent_plane",
"Plate/F8:face:52": "curved.axis curved.tangent_plane",
"Plate/F8:face:53": "curved.axis curved.tangent_plane",
"Plate/F8:face:53|F8:face:54": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:54": "curved.axis curved.tangent_plane",
"Plate/F8:face:61": "curved.axis curved.tangent_plane",
"Plate/F8:face:61|F8:face:62": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F8:face:62": "curved.axis curved.tangent_plane",
"Plate/F8:face:63": "curved.axis curved.tangent_plane",
"Plate/F8:face:9": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:31]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:34]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#3 & F8:face:32 & F8:face:33]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F8:face:44 & F8:face:48]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:45]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:47]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:52]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:54]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F7:side:c1#1 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:61]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:63]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F7:side:c1#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#2 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:22]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:24]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#[F8:face:10] & F4:side:[email protected]#[F8:face:13] & F8:face:10 & F8:face:13]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#[F8:face:10] & F4:side:[email protected]#[F8:face:13]]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:25]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected] & F8:face:27]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F8:face:10 & F8:face:9]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:13 & F8:face:14]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:14 & F8:face:9]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:22 & F8:face:23]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:23 & F8:face:24]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:25 & F8:face:28]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:27 & F8:face:28]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:31 & F8:face:32]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:33 & F8:face:34]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:44 & F8:face:45]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:47 & F8:face:48]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:52 & F8:face:53]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:53 & F8:face:54]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:61 & F8:face:62]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F8:face:62 & F8:face:63]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:31]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:34]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#3 & F8:face:32 & F8:face:33]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F8:face:44 & F8:face:48]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#2 & F4:side:[email protected]#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:45]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:47]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:52]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:54]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2 & F7:side:c1#1 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:61]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:63]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F7:side:c1#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#2 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:22]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected] & F8:face:24]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#[F8:face:10] & F4:side:[email protected]#[F8:face:13] & F8:face:10 & F8:face:13]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/43-cut-splits-body": {
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:side:l4|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:start#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:start#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:top#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/body": "body.copy body.mirror body.move body.pattern",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:start#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:start#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:start#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:start#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:side:l2|F2:side:l3#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l2|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:start#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:start#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:top#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:top#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar/body": "body.copy body.mirror body.move body.pattern",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:side:l2 & F2:start#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:side:l2 & F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l3#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l3#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/44-shell-l-bracket": {
"L/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l4|F2:side:l5~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4|F2:side:l5~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l5|F2:side:l6~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5|F2:side:l6~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l1|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l4|F3:inner:F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l5|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l5|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l6|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/body": "body.copy body.mirror body.move body.pattern",
"L/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"L/v[F2:side:l1 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l6]": "vertex.point",
"L/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"L/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"L/v[F2:side:l4 & F2:side:l5 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F2:side:l5 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F2:side:l5]": "vertex.point",
"L/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F2:side:l6]": "vertex.point",
"L/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l6]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l4 & F3:inner:F2:side:l5]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l5 & F3:inner:F2:side:l6]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l6 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l4 & F3:inner:F2:side:l5 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l5 & F3:inner:F2:side:l6 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/45-shell-boss-plate": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:start|F5:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start|F5:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start|F5:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l1|F5:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l1|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l1|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l2|F5:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l2|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l3|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l3|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l4|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:top|F5:inner:F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:top|F5:inner:F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F5:inner:F4:side:c1#1|F5:inner:F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F5:inner:F4:side:c1#2|F5:inner:F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4]": "vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l1 & F5:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l1 & F5:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l2 & F5:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l3 & F5:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Part/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Part/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Part/v[F5:inner:F2:side:l1 & F5:inner:F2:side:l2 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:side:l1 & F5:inner:F2:side:l4 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:side:l2 & F5:inner:F2:side:l3 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:side:l3 & F5:inner:F2:side:l4 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:top & F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2]": "vertex.point",
"Part/v[F5:inner:F2:top & F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2] (2)": "vertex.point",
"Part/v[F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2 & F5:inner:F4:top]": "vertex.point",
"Part/v[F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2 & F5:inner:F4:top] (2)": "vertex.point",
"design": "load"
},
"oracle/46-shell-two-open-faces": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4]": "vertex.point",
"Box/v[F2:side:l1 & F2:start]": "vertex.point",
"Box/v[F2:side:l1 & F2:start] (2)": "vertex.point",
"Box/v[F2:side:l1 & F2:top & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/47-draft-curved-pocket": {
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top|F4:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:bottom|F4:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom|F4:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:a1": "curved.axis curved.tangent_plane",
"Block/F4:side:a1|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:a1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:a2": "curved.axis curved.tangent_plane",
"Block/F4:side:a2|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:a2|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a2 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a2 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a2 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a2 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/48-pulley": {
"Pulley/F2:side:l1#1|F2:side:l1#2": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l1#1|F2:side:l1#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l1#1|F2:side:l12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#2|F2:side:l1#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l1#2|F2:side:l12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#2|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#3|F2:side:l12#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#3|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l10#1|F2:side:l11#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#1|F2:side:l9#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l10#2|F2:side:l11#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#2|F2:side:l9#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l10#3|F2:side:l11#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#3|F2:side:l9#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l11#1|F2:side:l11#2": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l11#1|F2:side:l11#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l11#1|F2:side:l12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l11#2|F2:side:l11#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l11#2|F2:side:l12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l11#3|F2:side:l12#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l12#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l12#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l12#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#1|F2:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#2|F2:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#3|F2:side:l3#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l3#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l3#1|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l3#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l3#2|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l3#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l3#3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l4#1|F2:side:l5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l4#2|F2:side:l5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l4#3|F2:side:l5#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l5#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l5#1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l5#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l5#2|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l5#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l5#3|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l6#1|F2:side:l7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l6#2|F2:side:l7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l6#3|F2:side:l7#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l7#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l7#1|F2:side:l8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l7#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l7#2|F2:side:l8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l7#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l7#3|F2:side:l8#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l8#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l8#1|F2:side:l9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l8#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l8#2|F2:side:l9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l8#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l8#3|F2:side:l9#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l9#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l9#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l9#3": "curved.axis curved.tangent_plane",
"Pulley/body": "body.copy body.mirror body.move body.pattern",
"Pulley/v[F2:side:l1#1 & F2:side:l1#2 & F2:side:l12#1 & F2:side:l12#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#1 & F2:side:l1#2 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#1 & F2:side:l1#3 & F2:side:l12#1 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#1 & F2:side:l1#3 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#2 & F2:side:l1#3 & F2:side:l12#2 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#2 & F2:side:l1#3 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#2 & F2:side:l11#1 & F2:side:l11#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#2 & F2:side:l9#1 & F2:side:l9#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#3 & F2:side:l11#1 & F2:side:l11#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#3 & F2:side:l9#1 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#2 & F2:side:l10#3 & F2:side:l11#2 & F2:side:l11#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#2 & F2:side:l10#3 & F2:side:l9#2 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l11#1 & F2:side:l11#2 & F2:side:l12#1 & F2:side:l12#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l11#1 & F2:side:l11#3 & F2:side:l12#1 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l11#2 & F2:side:l11#3 & F2:side:l12#2 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5#1 & F2:side:l5#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5#1 & F2:side:l5#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5#2 & F2:side:l5#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l5#1 & F2:side:l5#2 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l5#1 & F2:side:l5#3 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l5#2 & F2:side:l5#3 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l6#1 & F2:side:l6#2 & F2:side:l7#1 & F2:side:l7#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l6#1 & F2:side:l6#3 & F2:side:l7#1 & F2:side:l7#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l6#2 & F2:side:l6#3 & F2:side:l7#2 & F2:side:l7#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l7#1 & F2:side:l7#2 & F2:side:l8#1 & F2:side:l8#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l7#1 & F2:side:l7#3 & F2:side:l8#1 & F2:side:l8#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l7#2 & F2:side:l7#3 & F2:side:l8#2 & F2:side:l8#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l8#1 & F2:side:l8#2 & F2:side:l9#1 & F2:side:l9#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l8#1 & F2:side:l8#3 & F2:side:l9#1 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l8#2 & F2:side:l8#3 & F2:side:l9#2 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/49-helical-sweep": {
"Spring/F3:face:0|F3:face:2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:0|F3:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:1|F3:face:2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:1|F3:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:2": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Spring/F3:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Spring/body": "body.copy body.mirror body.move body.pattern",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:2]": "vertex.point",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:2] (2)": "vertex.point",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:3]": "vertex.point",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:3] (2)": "vertex.point",
"design": "load"
},
"oracle/50-sweep-tight-bend": {
"Bend/F3:end": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Bend/F3:end|F3:side:c1#[F3:end]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:end|F3:side:c1#[F3:end]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:side:c1#1": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#1|F3:side:c1#2~2": "!edge.chamfer !edge.fillet edge.normal_plane !edge.project",
"Bend/F3:side:c1#1|F3:side:c1#3": "edge.normal_plane edge.project",
"Bend/F3:side:c1#1|F3:side:c1#[F3:start]#2": "edge.normal_plane edge.project",
"Bend/F3:side:c1#2": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#2|F3:side:c1#4": "edge.normal_plane edge.project",
"Bend/F3:side:c1#2|F3:side:c1#[F3:start]#1": "edge.normal_plane edge.project",
"Bend/F3:side:c1#3": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#3|F3:side:c1#4~1": "!edge.chamfer !edge.fillet edge.normal_plane !edge.project",
"Bend/F3:side:c1#3|F3:side:c1#[F3:end]#2": "edge.normal_plane edge.project",
"Bend/F3:side:c1#4": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#4|F3:side:c1#[F3:end]#1": "edge.normal_plane edge.project",
"Bend/F3:side:c1#[F3:end]#1": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:end]#2": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:start]#1": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:start]#1|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:side:c1#[F3:start]#2": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:start]#2|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:start": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Bend/body": "body.copy body.mirror body.move body.pattern",
"Bend/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Bend/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.plane_three_points vertex.point",
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#3 & F3:side:c1#4]": "vertex.point",
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.point",
"Bend/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Bend/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start]": "vertex.point",
"Bend/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start] (2)": "vertex.point",
"design": "load"
},
"oracle/51-loft-rect-circle-offset": {
"Loft/F4:end": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/F4:end|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/body": "body.copy body.mirror body.move body.pattern",
"Loft/v[F4:end & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/52-circular-pattern-fillet": {
"Hub/F2:side:c1#1#[F2:start]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#1#[F2:start]|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:side:c1#1#[F2:top]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#1#[F2:top]|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:side:c1#2#[F2:start]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#2#[F2:start]|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:side:c1#2#[F2:top]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#2#[F2:top]|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F2:top": "!face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Hub/F2:top|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Hub/F2:top|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:11|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:12|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:14|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:15|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:17|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:18|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:20|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:21|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:23|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:24|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1#1|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Hub/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1#2|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1|F6:blend::face:11|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2|F6:blend::face:12|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1|F6:blend::face:14|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2|F6:blend::face:15|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1|F6:blend::face:17|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2|F6:blend::face:18|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1|F6:blend::face:20|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2|F6:blend::face:21|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#1|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#1|F6:blend::face:23|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:[email protected]#2|F4:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:[email protected]#2|F6:blend::face:24|:face:7": "edge.normal_plane edge.project",
"Hub/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F5:blend:F2:top|F4:side:c1#1": "curved.axis curved.tangent_plane",
"Hub/F5:blend:F2:top|F4:side:c1#2": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:11|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:12|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:14|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:15|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:17|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:18|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:20|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:21|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:23|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:24|:face:7": "curved.axis curved.tangent_plane",
"Hub/body": "body.copy body.mirror body.move body.pattern",
"Hub/v[F2:side:c1#1#[F2:start] & F2:side:c1#2#[F2:start] & F2:start]": "vertex.point",
"Hub/v[F2:side:c1#1#[F2:start] & F2:side:c1#2#[F2:start] & F2:start] (2)": "vertex.point",
"Hub/v[F2:side:c1#1#[F2:top] & F2:side:c1#2#[F2:top] & F2:top]": "vertex.point",
"Hub/v[F2:side:c1#1#[F2:top] & F2:side:c1#2#[F2:top] & F2:top] (2)": "vertex.point",
"Hub/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Hub/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F4:[email protected]] (2)": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7]": "vertex.point",
"Hub/v[F4:side:[email protected]#1 & F4:side:[email protected]#2 & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7] (2)": "vertex.point",
"design": "load"
},
"oracle/53-path-pattern": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:start & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Plate/v[F2:top & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"design": "load"
},
"oracle/54-mirror-body-fillets": {
"Bracket/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l1|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:[email protected]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:[email protected]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:[email protected]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:[email protected]|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:[email protected]|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l3|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F3:blend:F2:side:l1|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F3:blend:F2:side:l2|F2:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Bracket/F3:blend:F2:side:l1|F2:side:[email protected]": "curved.axis curved.tangent_plane",
"Bracket/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Bracket/F3:blend:F2:side:l2|F2:side:[email protected]": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#1": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#[email protected]": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#2": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#[email protected]": "curved.axis curved.tangent_plane",
"Bracket/body": "body.copy body.mirror body.move body.pattern",
"Bracket/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:[email protected] & F2:start & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:[email protected] & F2:start & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:[email protected] & F2:top & F3:blend:F2:side:l1|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:[email protected] & F2:top & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:[email protected]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:start & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Bracket/v[F2:start & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"Bracket/v[F2:start & F5:side:c1#[email protected] & F5:side:c1#[email protected]]": "vertex.point",
"Bracket/v[F2:start & F5:side:c1#[email protected] & F5:side:c1#[email protected]] (2)": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#[email protected] & F5:side:c1#[email protected]]": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#[email protected] & F5:side:c1#[email protected]] (2)": "vertex.point",
"design": "load"
},
"oracle/55-tapped-hole-cosmetic": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F3:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F3:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F3:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1#1|F3:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1#2|F3:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1#3|F3:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:2#1": "!curved.axis !curved.tangent_plane",
"Plate/F3:bore:side:2#2": "!curved.axis !curved.tangent_plane",
"Plate/F3:bore:side:2#3": "!curved.axis !curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F3:bore:side:1#1 & F3:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F3:bore:side:1#1 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F3:bore:side:1#2 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:1#1 & F3:bore:side:1#2 & F3:bore:side:2#1 & F3:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:1#1 & F3:bore:side:1#3 & F3:bore:side:2#1 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:1#2 & F3:bore:side:1#3 & F3:bore:side:2#2 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/56-holes-on-curved-face": {
"Cyl/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F3:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F3:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F3:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F3:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Cyl/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Cyl/F3:bore:side:1#1": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:1#1|F3:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F3:bore:side:1#2": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:1#2|F3:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F3:bore:side:1#3": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:1#3|F3:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F3:bore:side:2#1": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:2#2": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:2#3": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#1": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#1|F4:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F4:bore:side:1#2": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#2|F4:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F4:bore:side:1#3": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#3|F4:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F4:bore:side:2#1": "!curved.axis !curved.tangent_plane",
"Cyl/F4:bore:side:2#2": "!curved.axis !curved.tangent_plane",
"Cyl/F4:bore:side:2#3": "!curved.axis !curved.tangent_plane",
"Cyl/body": "body.copy body.mirror body.move body.pattern",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F3:bore:side:1#1 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F3:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F3:bore:side:1#2 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F4:bore:side:1#1 & F4:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F4:bore:side:1#1 & F4:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F4:bore:side:1#2 & F4:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#2 & F3:bore:side:1#1 & F3:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F3:bore:side:1#1 & F3:bore:side:1#2 & F3:bore:side:2#1 & F3:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F3:bore:side:1#1 & F3:bore:side:1#3 & F3:bore:side:2#1 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F3:bore:side:1#2 & F3:bore:side:1#3 & F3:bore:side:2#2 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F4:bore:side:1#1 & F4:bore:side:1#2 & F4:bore:side:2#1 & F4:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F4:bore:side:1#1 & F4:bore:side:1#3 & F4:bore:side:2#1 & F4:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F4:bore:side:1#2 & F4:bore:side:1#3 & F4:bore:side:2#2 & F4:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/57-hole-pattern-sketch-points": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:bore:side:0#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:cbore:side:0#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#1|F4:cbore:base#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#2": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#2|F4:cbore:base#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#3": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#3|F4:cbore:base#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#4": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#4|F4:cbore:base#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#5": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#5|F4:cbore:base#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#6": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#6|F4:cbore:base#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#1|F4:cbore:base#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#2|F4:cbore:base#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#3|F4:cbore:base#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#4": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#4|F4:cbore:base#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#5": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#5|F4:cbore:base#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#6": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#6|F4:cbore:base#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#1|F4:cbore:side:0#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#1|F4:cbore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#2|F4:cbore:side:0#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#2|F4:cbore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#3": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#3|F4:cbore:side:0#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#3|F4:cbore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#4": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#4|F4:cbore:side:0#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#4|F4:cbore:side:1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#5": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#5|F4:cbore:side:0#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#5|F4:cbore:side:1#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#6": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#6|F4:cbore:side:0#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#6|F4:cbore:side:1#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:side:0#1": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#2": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#3": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#4": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#5": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#6": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#4": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#5": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#6": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4]": "vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#1 & F4:bore:side:1#1]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#1 & F4:bore:side:1#1] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#2 & F4:bore:side:1#2]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#2 & F4:bore:side:1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#3 & F4:bore:side:1#3]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#3 & F4:bore:side:1#3] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#4 & F4:bore:side:1#4]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#4 & F4:bore:side:1#4] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#5 & F4:bore:side:1#5]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#5 & F4:bore:side:1#5] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#6 & F4:bore:side:1#6]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#6 & F4:bore:side:1#6] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#1 & F4:cbore:side:1#1]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#1 & F4:cbore:side:1#1] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#2 & F4:cbore:side:1#2]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#2 & F4:cbore:side:1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#3 & F4:cbore:side:1#3]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#3 & F4:cbore:side:1#3] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#4 & F4:cbore:side:1#4]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#4 & F4:cbore:side:1#4] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#5 & F4:cbore:side:1#5]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#5 & F4:cbore:side:1#5] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#6 & F4:cbore:side:1#6]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#6 & F4:cbore:side:1#6] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#1 & F4:bore:side:1#1 & F4:cbore:base#1]": "vertex.point",
"Plate/v[F4:bore:side:0#1 & F4:bore:side:1#1 & F4:cbore:base#1] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#2 & F4:bore:side:1#2 & F4:cbore:base#2]": "vertex.point",
"Plate/v[F4:bore:side:0#2 & F4:bore:side:1#2 & F4:cbore:base#2] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#3 & F4:bore:side:1#3 & F4:cbore:base#3]": "vertex.point",
"Plate/v[F4:bore:side:0#3 & F4:bore:side:1#3 & F4:cbore:base#3] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#4 & F4:bore:side:1#4 & F4:cbore:base#4]": "vertex.point",
"Plate/v[F4:bore:side:0#4 & F4:bore:side:1#4 & F4:cbore:base#4] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#5 & F4:bore:side:1#5 & F4:cbore:base#5]": "vertex.point",
"Plate/v[F4:bore:side:0#5 & F4:bore:side:1#5 & F4:cbore:base#5] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#6 & F4:bore:side:1#6 & F4:cbore:base#6]": "vertex.point",
"Plate/v[F4:bore:side:0#6 & F4:bore:side:1#6 & F4:cbore:base#6] (2)": "vertex.point",
"Plate/v[F4:cbore:base#1 & F4:cbore:side:0#1 & F4:cbore:side:1#1]": "vertex.point",
"Plate/v[F4:cbore:base#1 & F4:cbore:side:0#1 & F4:cbore:side:1#1] (2)": "vertex.point",
"Plate/v[F4:cbore:base#2 & F4:cbore:side:0#2 & F4:cbore:side:1#2]": "vertex.point",
"Plate/v[F4:cbore:base#2 & F4:cbore:side:0#2 & F4:cbore:side:1#2] (2)": "vertex.point",
"Plate/v[F4:cbore:base#3 & F4:cbore:side:0#3 & F4:cbore:side:1#3]": "vertex.point",
"Plate/v[F4:cbore:base#3 & F4:cbore:side:0#3 & F4:cbore:side:1#3] (2)": "vertex.point",
"Plate/v[F4:cbore:base#4 & F4:cbore:side:0#4 & F4:cbore:side:1#4]": "vertex.point",
"Plate/v[F4:cbore:base#4 & F4:cbore:side:0#4 & F4:cbore:side:1#4] (2)": "vertex.point",
"Plate/v[F4:cbore:base#5 & F4:cbore:side:0#5 & F4:cbore:side:1#5]": "vertex.point",
"Plate/v[F4:cbore:base#5 & F4:cbore:side:0#5 & F4:cbore:side:1#5] (2)": "vertex.point",
"Plate/v[F4:cbore:base#6 & F4:cbore:side:0#6 & F4:cbore:side:1#6]": "vertex.point",
"Plate/v[F4:cbore:base#6 & F4:cbore:side:0#6 & F4:cbore:side:1#6] (2)": "vertex.point",
"design": "load"
},
"oracle/58-phone-stand": {
"Stand/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:bottom|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l5~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l5~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l5~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F3:blend:F2:side:l5|F2:side:l6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F3:blend:F2:side:l8|F2:side:l9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F4:blend:F2:side:l4|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l10|F2:side:l9~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l10|F2:side:l9~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l10|F2:side:l9~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l10|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l10~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l10~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l10~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l2|F2:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5~1": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5~2": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5~3": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l5|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6~1": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6~2": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6~3": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5~1": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5~2": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5~3": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l6|F2:side:l7~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6|F2:side:l7~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6|F2:side:l7~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6~1": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6~2": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6~3": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l7|F2:side:l8~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l7|F2:side:l8~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l7|F2:side:l8~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9~1": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9~2": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9~3": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l9|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9~1": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9~2": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9~3": "edge.axis edge.normal_plane edge.project",
"Stand/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:top|F3:blend:F2:side:l5|F2:side:l6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:top|F3:blend:F2:side:l8|F2:side:l9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:top|F4:blend:F2:side:l4|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F3:blend:F2:side:l5|F2:side:l6": "curved.axis curved.tangent_plane",
"Stand/F3:blend:F2:side:l8|F2:side:l9": "curved.axis curved.tangent_plane",
"Stand/F4:blend:F2:side:l4|F2:side:l5": "curved.axis curved.tangent_plane",
"Stand/F6:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/body": "body.copy body.mirror body.move body.pattern",
"Stand/v[F2:bottom & F2:side:l1 & F2:side:l10]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l10 & F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l1]": "vertex.point",
"Stand/v[F2:bottom & F2:side:l1] (2)": "vertex.point",
"Stand/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l5]": "vertex.point",
"Stand/v[F2:bottom & F2:side:l5] (2)": "vertex.point",
"Stand/v[F2:bottom & F2:side:l6 & F2:side:l7]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l7 & F2:side:l8]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F2:side:l10 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F2:side:l10]": "vertex.point",
"Stand/v[F2:side:l1 & F2:side:l10] (2)": "vertex.point",
"Stand/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"Stand/v[F2:side:l1 & F2:side:l2] (2)": "vertex.point",
"Stand/v[F2:side:l1 & F2:top]": "vertex.point",
"Stand/v[F2:side:l1 & F2:top] (2)": "vertex.point",
"Stand/v[F2:side:l1 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l10 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l10 & F2:side:l9]": "vertex.point",
"Stand/v[F2:side:l10 & F2:side:l9] (2)": "vertex.point",
"Stand/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Stand/v[F2:side:l2 & F2:side:l3] (2)": "vertex.point",
"Stand/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Stand/v[F2:side:l3 & F2:side:l4] (2)": "vertex.point",
"Stand/v[F2:side:l4 & F2:top & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.point",
"Stand/v[F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5] (2)": "vertex.point",
"Stand/v[F2:side:l5 & F2:top & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F2:top & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F2:top]": "vertex.point",
"Stand/v[F2:side:l5 & F2:top] (2)": "vertex.point",
"Stand/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.point",
"Stand/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6] (2)": "vertex.point",
"Stand/v[F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.point",
"Stand/v[F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5] (2)": "vertex.point",
"Stand/v[F2:side:l5 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l6 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l6 & F2:side:l7]": "vertex.point",
"Stand/v[F2:side:l6 & F2:side:l7] (2)": "vertex.point",
"Stand/v[F2:side:l6 & F2:top & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.point",
"Stand/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6] (2)": "vertex.point",
"Stand/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l7 & F2:side:l8]": "vertex.point",
"Stand/v[F2:side:l7 & F2:side:l8] (2)": "vertex.point",
"Stand/v[F2:side:l8 & F2:top & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.point",
"Stand/v[F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9] (2)": "vertex.point",
"Stand/v[F2:side:l9 & F2:top & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.point",
"Stand/v[F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9] (2)": "vertex.point",
"design": "load"
},
"oracle/59-enclosure-base": {
"Enclosure/F11:bottom#[F11:side:c1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c1]|F11:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c1]|F11:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c2]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c2]|F11:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c2]|F11:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c3]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c3]|F11:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c3]|F11:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c4]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c4]|F11:side:c4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c4]|F11:side:c4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c1#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c1#1|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c1#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c1#2|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c2#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c2#1|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c2#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c2#2|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c3#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c3#1|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c3#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c3#2|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c4#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c4#1|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c4#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c4#2|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~6": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:side:r2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:side:r2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:side:r4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:side:r4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:side:r2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:side:r2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:side:r4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:side:r4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4~5": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F8:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F8:side:r4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c1#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c1#1|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c1#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c1#2|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c2#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c2#1|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c2#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c2#2|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c3#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c3#1|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c3#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c3#2|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c4#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c4#1|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c4#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c4#2|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:top#[F7:side:c1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:top#[F7:side:c2]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:top#[F7:side:c3]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:top#[F7:side:c4]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F8:side:r2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Enclosure/F8:side:r2|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:side:r4": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Enclosure/F8:side:r4|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/body": "body.copy body.mirror body.move body.pattern",
"Enclosure/v[F11:bottom#[F11:side:c1] & F11:side:c1#1 & F11:side:c1#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c1] & F11:side:c1#1 & F11:side:c1#2] (2)": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c2] & F11:side:c2#1 & F11:side:c2#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c2] & F11:side:c2#1 & F11:side:c2#2] (2)": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c3] & F11:side:c3#1 & F11:side:c3#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c3] & F11:side:c3#1 & F11:side:c3#2] (2)": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c4] & F11:side:c4#1 & F11:side:c4#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c4] & F11:side:c4#1 & F11:side:c4#2] (2)": "vertex.point",
"Enclosure/v[F11:side:c1#1 & F11:side:c1#2 & F7:top#[F7:side:c1]]": "vertex.point",
"Enclosure/v[F11:side:c1#1 & F11:side:c1#2 & F7:top#[F7:side:c1]] (2)": "vertex.point",
"Enclosure/v[F11:side:c2#1 & F11:side:c2#2 & F7:top#[F7:side:c2]]": "vertex.point",
"Enclosure/v[F11:side:c2#1 & F11:side:c2#2 & F7:top#[F7:side:c2]] (2)": "vertex.point",
"Enclosure/v[F11:side:c3#1 & F11:side:c3#2 & F7:top#[F7:side:c3]]": "vertex.point",
"Enclosure/v[F11:side:c3#1 & F11:side:c3#2 & F7:top#[F7:side:c3]] (2)": "vertex.point",
"Enclosure/v[F11:side:c4#1 & F11:side:c4#2 & F7:top#[F7:side:c4]]": "vertex.point",
"Enclosure/v[F11:side:c4#1 & F11:side:c4#2 & F7:top#[F7:side:c4]] (2)": "vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2] (5)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3] (5)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4] (5)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4] (5)": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1]": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1] (2)": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3]": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F8:side:r2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F8:side:r4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r2 & F8:top]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r2]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r4 & F8:top]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r4]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F8:side:r2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F8:side:r4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (3)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3] (4)": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4] (2)": "vertex.point",
"design": "load"
},
"oracle/60-pipe-flange": {
"Flange/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:side:l1|F2:side:l2#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l2#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l2#3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:l2#1|F2:side:l3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:l2#2|F2:side:l3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Flange/F2:side:l2#3|F2:side:l3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Flange/F2:side:l3|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:[email protected]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#1": "edge.normal_plane edge.project",
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#2": "edge.normal_plane edge.project",
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#3": "edge.normal_plane edge.project",
"Flange/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:l4#1|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l4#1|F7:blend:F2:side:l3|F2:side:l4#1": "edge.normal_plane edge.project",
"Flange/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:l4#2|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l4#2|F7:blend:F2:side:l3|F2:side:l4#2": "edge.normal_plane edge.project",
"Flange/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Flange/F2:side:l4#3|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l4#3|F7:blend:F2:side:l3|F2:side:l4#3": "edge.normal_plane edge.project",
"Flange/F2:side:l5": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#1": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:l6#1|F6:blend:F2:side:l5|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:l6#2|F6:blend:F2:side:l5|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Flange/F2:side:l6#3|F6:blend:F2:side:l5|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:[email protected]#2": "curved.axis curved.tangent_plane",
"Flange/F6:blend:F2:side:l5|F2:side:l6#1": "curved.axis curved.tangent_plane",
"Flange/F6:blend:F2:side:l5|F2:side:l6#2": "curved.axis curved.tangent_plane",
"Flange/F6:blend:F2:side:l5|F2:side:l6#3": "curved.axis curved.tangent_plane",
"Flange/F7:blend:F2:side:l3|F2:side:l4#1": "curved.axis curved.tangent_plane",
"Flange/F7:blend:F2:side:l3|F2:side:l4#2": "curved.axis curved.tangent_plane",
"Flange/F7:blend:F2:side:l3|F2:side:l4#3": "curved.axis curved.tangent_plane",
"Flange/body": "body.copy body.mirror body.move body.pattern",
"Flange/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:[email protected]#1 & F4:side:[email protected]#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#2 & F2:side:l4#3 & F7:blend:F2:side:l3|F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l6#1 & F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l6#1 & F2:side:l6#3 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l6#2 & F2:side:l6#3 & F6:blend:F2:side:l5|F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/61-shaft-keyway": {
"Shaft/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#1": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#1|F3:blend:F2:side:l1|F2:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#2|F3:blend:F2:side:l1|F2:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l2#3|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#3|F3:blend:F2:side:l1|F2:side:l2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l3": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l3|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l3|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l4#1|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1|F6:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l4#2|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l4#3|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3|F6:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l5": "face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l5|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l5|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l5|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l6#1|F3:blend:F2:side:l6#1|F2:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l6#2|F3:blend:F2:side:l6#2|F2:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l6#3|F3:blend:F2:side:l6#3|F2:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l7": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l7|F3:blend:F2:side:l6#1|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l7|F3:blend:F2:side:l6#2|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l7|F3:blend:F2:side:l6#3|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l1|F2:side:l2#3": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l6#1|F2:side:l7": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l6#2|F2:side:l7": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l6#3|F2:side:l7": "curved.axis curved.tangent_plane",
"Shaft/F6:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F6:bottom|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F6:bottom|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F6:bottom|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F6:bottom|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F6:side:a1": "curved.axis curved.tangent_plane",
"Shaft/F6:side:a1|F6:side:l1": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:a1|F6:side:l2": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:a2": "curved.axis curved.tangent_plane",
"Shaft/F6:side:a2|F6:side:l1": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:a2|F6:side:l2": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Shaft/F6:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Shaft/body": "body.copy body.mirror body.move body.pattern",
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#2 & F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l3 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F6:side:a1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F6:side:a2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F6:side:a1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F6:side:a2 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#3 & F6:side:a1 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#3 & F6:side:a2 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l5 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l5 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l5 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l6#1 & F2:side:l6#2 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l6#1 & F2:side:l6#3 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l6#2 & F2:side:l6#3 & F3:blend:F2:side:l6#2|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a1 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a2 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a2 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/62-heat-sink": {
"HeatSink/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l2|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l4|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]]|F5:side:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l4,F5:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l4,F5:side:l4]|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:[email protected]|F5:[email protected]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:[email protected]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/body": "body.copy body.mirror body.move body.pattern",
"HeatSink/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:side:l2 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:side:l4 & F2:top#[F2:side:l4,F5:side:l4]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:l2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l4,F5:side:l4] & F5:side:l4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l2 & F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:side:l4 & F2:top#[F2:side:l4,F5:side:l4]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:l2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:[email protected],F5:side:[email protected]] & F5:side:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l4,F5:side:l4] & F5:side:l4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:[email protected] & F5:[email protected]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/63-hinge-knuckle": {
"Hinge/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:start~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l2|F2:side:l3#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F4:side:c1#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F6:side:c1#1#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F6:side:c1#2#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l4|F2:start~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F2:start~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F4:side:c1#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F6:side:c1#1#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F6:side:c1#2#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:start|F8:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:start|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:start|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Hinge/F2:top|F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F8:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#1#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#1#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#1#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#1#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#2#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#2#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#2#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#2#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F8:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F8:side:l1|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F8:side:l1|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F8:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F8:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/body": "body.copy body.mirror body.move body.pattern",
"Hinge/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:start]": "vertex.point",
"Hinge/v[F2:side:l1 & F2:start] (2)": "vertex.point",
"Hinge/v[F2:side:l1 & F2:top]": "vertex.point",
"Hinge/v[F2:side:l1 & F2:top] (2)": "vertex.point",
"Hinge/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F8:side:l2] & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F2:start]": "vertex.point",
"Hinge/v[F2:side:l2 & F2:top & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F2:top]": "vertex.point",
"Hinge/v[F2:side:l2 & F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2]]": "vertex.point",
"Hinge/v[F2:side:l2 & F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2]] (2)": "vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l2,F8:side:l2] & F2:start & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:side:l4 & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:start & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F2:start]": "vertex.point",
"Hinge/v[F2:side:l4 & F2:top & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F2:top]": "vertex.point",
"Hinge/v[F2:side:l4 & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F4:side:c1#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4]]": "vertex.point",
"Hinge/v[F2:side:l4 & F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4]] (2)": "vertex.point",
"Hinge/v[F2:start & F8:side:l1 & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:start & F8:side:l1 & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F8:side:l1 & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F8:side:l1 & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2] & F8:side:l2] (2)": "vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4] & F8:side:l4] (2)": "vertex.point",
"design": "load"
},
"oracle/64-sketch-tangent-arc-chain": {
"Wave/F2:side:a1": "curved.axis curved.tangent_plane",
"Wave/F2:side:a1|F2:side:a2": "edge.axis edge.normal_plane edge.project",
"Wave/F2:side:a1|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Wave/F2:side:a1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:a2": "curved.axis curved.tangent_plane",
"Wave/F2:side:a2|F2:side:a3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Wave/F2:side:a2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a3": "curved.axis curved.tangent_plane",
"Wave/F2:side:a3|F2:side:a4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Wave/F2:side:a3|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a3|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:a4": "curved.axis curved.tangent_plane",
"Wave/F2:side:a4|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:a4|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a4|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Wave/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Wave/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Wave/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Wave/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Wave/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Wave/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Wave/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Wave/v[F2:side:a1 & F2:side:a2 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a1 & F2:side:a2 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a2 & F2:side:a3 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Wave/v[F2:side:a2 & F2:side:a3 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a3 & F2:side:a4 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a3 & F2:side:a4 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a4 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a4 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Wave/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/65-sketch-gear-tooth": {
"Tooth/F2:side:f1": "curved.axis curved.axis+edit curved.tangent_plane",
"Tooth/F2:side:f1|F2:side:r1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f1|F2:side:t1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f1|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Tooth/F2:side:f2": "curved.axis curved.tangent_plane",
"Tooth/F2:side:f2|F2:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f2|F2:side:t1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Tooth/F2:side:f2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r1": "curved.axis curved.tangent_plane",
"Tooth/F2:side:r1|F2:side:s1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:side:r2": "curved.axis curved.tangent_plane",
"Tooth/F2:side:r2|F2:side:s2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:side:r2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Tooth/F2:side:s1|F2:side:s2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:side:s1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Tooth/F2:side:s2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:t1": "curved.axis curved.tangent_plane",
"Tooth/F2:side:t1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Tooth/F2:side:t1|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Tooth/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Tooth/body": "body.copy body.mirror body.move body.pattern",
"Tooth/v[F2:side:f1 & F2:side:r1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Tooth/v[F2:side:f1 & F2:side:r1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:f1 & F2:side:t1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Tooth/v[F2:side:f1 & F2:side:t1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:f2 & F2:side:r2 & F2:start]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:f2 & F2:side:r2 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:f2 & F2:side:t1 & F2:start]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:f2 & F2:side:t1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:r1 & F2:side:s1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:r1 & F2:side:s1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:r2 & F2:side:s2 & F2:start]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:r2 & F2:side:s2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Tooth/v[F2:side:s1 & F2:side:s2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:s1 & F2:side:s2 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/66-sketch-linkage": {
"Link/F2:side:a1": "curved.axis curved.tangent_plane",
"Link/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Link/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Link/F2:side:a1|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Link/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:a2": "curved.axis curved.axis+edit curved.tangent_plane",
"Link/F2:side:a2|F2:side:l1": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:a2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Link/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:a2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Link/F2:side:h1#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h1#1|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h1#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h1#2|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h2#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Link/F2:side:h2#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Link/F2:side:h3#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h3#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h3#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h3#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h3#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h3#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h4#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#1|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h4#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Link/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Link/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Link/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Link/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Link/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Link/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Link/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Link/v[F2:side:a1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Link/v[F2:side:a1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Link/v[F2:side:a2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Link/v[F2:side:a2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Link/v[F2:side:a2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Link/v[F2:side:a2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:start]": "vertex.point",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:top] (2)": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:start]": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:top] (2)": "vertex.point",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:start]": "vertex.point vertex.point+edit",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:top] (2)": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:start]": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:top] (2)": "vertex.point",
"design": "load"
},
"oracle/67-sm-base-flange": {
"Body1/F2:face:0": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:2|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/68-sm-edge-flange": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/69-sm-tray": {
"Body1/F2:face:0": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:0|F3:face:30": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:34": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:38": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:42": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:1|F3:face:31": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:35": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:39": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:43": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:14": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:15": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:35": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:13|F3:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:14|F3:face:37": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:15|F3:face:36": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:16|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:38": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:17": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:17|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:39": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:18": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:18|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:18|F3:face:22": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:19": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:19|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20|F3:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:21": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:21|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:22": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:22|F3:face:40": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:23|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:42": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:24": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:24|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:43": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:25": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:25|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:25|F3:face:29": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:26": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:26|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:27": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:27|F3:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:28": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:28|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:29": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:29|F3:face:44": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:30": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:30": "curved.axis curved.tangent_plane",
"Body1/F3:face:30|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:30|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:31": "curved.axis curved.tangent_plane",
"Body1/F3:face:31|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:31|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:32": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:32|F3:face:37": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:32|F3:face:8": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:33": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:33|F3:face:44": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:33|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:34": "curved.axis curved.tangent_plane",
"Body1/F3:face:34|F3:face:36": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:34|F3:face:37": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:34|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:35": "curved.axis curved.tangent_plane",
"Body1/F3:face:35|F3:face:36": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:35|F3:face:37": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:36": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:36|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:37": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:38": "curved.axis curved.tangent_plane",
"Body1/F3:face:38|F3:face:40": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:38|F3:face:41": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:39": "curved.axis curved.tangent_plane",
"Body1/F3:face:39|F3:face:40": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:39|F3:face:41": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:31": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:40": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:40|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:41": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:42": "curved.axis curved.tangent_plane",
"Body1/F3:face:42|F3:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:42|F3:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:43": "curved.axis curved.tangent_plane",
"Body1/F3:face:43|F3:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:43|F3:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:44": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:45": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:4|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F3:face:30 & F3:face:32 & F3:face:34 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:30 & F3:face:33 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:34 & F3:face:36 & F3:face:38 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:38 & F3:face:40 & F3:face:42 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:31 & F3:face:32 & F3:face:35 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:31 & F3:face:33 & F3:face:43 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:35 & F3:face:36 & F3:face:39 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:39 & F3:face:40 & F3:face:43 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:15]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:13 & F3:face:14]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:14 & F3:face:35 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:15 & F3:face:35 & F3:face:36]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:15 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:13 & F3:face:14 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:14 & F3:face:34 & F3:face:37 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:15 & F3:face:34 & F3:face:36 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:18 & F3:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:20 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:21 & F3:face:38 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:22 & F3:face:38 & F3:face:40]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:18 & F3:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:20 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:21 & F3:face:39 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:22 & F3:face:39 & F3:face:40]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:30 & F3:face:32 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:30 & F3:face:33 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:4 & F3:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:25 & F3:face:26]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:25 & F3:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:26 & F3:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:27 & F3:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:28 & F3:face:42 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:29 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:25 & F3:face:26]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:25 & F3:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:26 & F3:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:27 & F3:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:28 & F3:face:43 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:29 & F3:face:43 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:31 & F3:face:32 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:31 & F3:face:33 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:4 & F3:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/70-sm-flange-45": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/71-sm-custom-rule": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F3:face:16]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F3:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:18": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F3:face:16]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F3:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:15": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:16]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:16]|F2:face:3#[F3:face:13,F3:face:18,F3:face:19]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:16]|F3:face:16": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]|F3:face:13": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]|F3:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F3:face:18,F3:face:19]|F3:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:20]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:20]|F2:face:5#[F3:face:14,F3:face:15,F3:face:8]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:20]|F3:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14": "curved.axis curved.tangent_plane",
"Body1/F3:face:14|F3:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14|F3:face:4": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:15": "curved.axis curved.tangent_plane",
"Body1/F3:face:15|F3:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:16": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:16|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:18": "curved.axis curved.tangent_plane",
"Body1/F3:face:18|F3:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:18|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:19": "curved.axis curved.tangent_plane",
"Body1/F3:face:19|F3:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:18]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F3:face:14 & F3:face:16]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:14]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F3:face:18 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F3:face:15 & F3:face:16]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:15]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F3:face:20] & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:10 & F3:face:13 & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:13 & F3:face:18 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:14 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:14,F3:face:15,F3:face:8] & F3:face:15 & F3:face:5 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:18 & F3:face:20 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:14 & F3:face:16 & F3:face:4 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:15 & F3:face:16 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:4 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:4 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/72-sm-contour-flange": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10|F2:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
"Body1/F2:face:14|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:15": "curved.axis curved.tangent_plane",
"Body1/F2:face:15|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:16|F2:face:2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:17|F2:face:3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18": "curved.axis curved.tangent_plane",
"Body1/F2:face:18|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:19": "curved.axis curved.tangent_plane",
"Body1/F2:face:19|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:15": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:19 & F2:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:12 & F2:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:13 & F2:face:19 & F2:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:12 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:18 & F2:face:20 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:12 & F2:face:13 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:13 & F2:face:18 & F2:face:21 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:16 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:17 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:16 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:17 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:20 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:21 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:20 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:21 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/73-sm-hem": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F4:face:18": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:10|F4:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18": "curved.axis curved.tangent_plane",
"Body1/F4:face:18|F4:face:20": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18|F4:face:21": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18|F4:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:19": "curved.axis curved.tangent_plane",
"Body1/F4:face:19|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:19|F4:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F4:face:18 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:9 & F4:face:18 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F4:face:19 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:9 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:11 & F4:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:11 & F4:face:19 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:13 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:12 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:18 & F4:face:20 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:12 & F4:face:13 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13 & F4:face:18 & F4:face:21 & F4:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/74-sm-unfold-refold": {
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F2:face:3#[F4:face:0,F4:face:13,F7:face:22]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F3:face:13": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F7:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F7:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F7:face:22": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F7:face:28,F7:face:29]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:11,F7:face:28,F7:face:29]|F2:face:5#[F4:face:0,F4:face:13]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F7:face:28,F7:face:29]|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F7:face:28,F7:face:29]|F7:face:28": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F7:face:28,F7:face:29]|F7:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F2:face:5#[F4:face:0,F4:face:13]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F3:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F7:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F7:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F4:face:0,F4:face:13]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F7:face:22": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:25": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:29": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F7:face:25": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F7:face:29": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]|F7:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:24": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:28": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F7:face:24": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F7:face:28": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]|F7:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l1|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l1|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]|F6:side:l2#[F7:face:24,F7:face:25]": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l2#[F7:face:24,F7:face:25]": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l2#[F7:face:24,F7:face:25]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l2#[F7:face:24,F7:face:25]|F7:face:24": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l2#[F7:face:24,F7:face:25]|F7:face:25": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l3|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]|F6:side:l4#[F7:face:28,F7:face:29]": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l4#[F7:face:28,F7:face:29]": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l4#[F7:face:28,F7:face:29]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l4#[F7:face:28,F7:face:29]|F7:face:28": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l4#[F7:face:28,F7:face:29]|F7:face:29": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:20": "curved.axis curved.tangent_plane",
"Body1/F7:face:20|F7:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:21": "curved.axis curved.tangent_plane",
"Body1/F7:face:21|F7:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:22": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F7:face:24": "curved.axis curved.tangent_plane",
"Body1/F7:face:25": "curved.axis curved.tangent_plane",
"Body1/F7:face:28": "curved.axis curved.tangent_plane",
"Body1/F7:face:29": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:25]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:24]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F3:face:13 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F7:face:25]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F3:face:13 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F7:face:24]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:21 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:20 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:11,F7:face:28,F7:face:29] & F2:face:5#[F4:face:0,F4:face:13] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:11,F7:face:28,F7:face:29] & F2:face:5#[F4:face:0,F4:face:13] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:11,F7:face:28,F7:face:29] & F3:face:11 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:11,F7:face:28,F7:face:29] & F3:face:11 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F7:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F2:face:5#[F4:face:0,F4:face:13] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F2:face:5#[F4:face:0,F4:face:13] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F3:face:8 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21] & F7:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F3:face:8 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20] & F7:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21] & F7:face:21 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20] & F7:face:20 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:7 & F3:face:8 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:7 & F3:face:8 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l2#[F7:face:24,F7:face:25] & F7:face:25]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l3 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l1 & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l1 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1] & F6:side:l2#[F7:face:24,F7:face:25] & F7:face:25]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l2#[F7:face:24,F7:face:25] & F7:face:24]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l3 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l1 & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l1 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1] & F6:side:l2#[F7:face:24,F7:face:25] & F7:face:24]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:28]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/75-sm-bracket-holes": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:0|F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:1|F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]|F2:face:4#[F4:face:14,F4:face:19,F4:face:20]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:9|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:10|F4:face:12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:13|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:14": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:18": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:18|F4:face:21": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:19": "curved.axis curved.tangent_plane",
"Body1/F4:face:19|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:20": "curved.axis curved.tangent_plane",
"Body1/F4:face:20|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:21": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:9": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#2": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:10 & F4:face:18 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F2:face:0 & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F2:face:0 & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
"Body1/v[F2:face:0 & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:11 & F4:face:18 & F4:face:20 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F2:face:1 & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
"Body1/v[F2:face:1 & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:10 & F4:face:14 & F4:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:11 & F4:face:14 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:5 & F4:face:18 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:6 & F4:face:18 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:9 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:9 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:12 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:12 & F4:face:20 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/76-sm-thickness-variant": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/blind_hole_in_long_d_profile": {
"Slat/F2:side:a1": "curved.axis curved.tangent_plane",
"Slat/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Slat/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Slat/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/body": "body.copy body.mirror body.move body.pattern",
"Slat/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:a1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:a1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l2 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Slat/v[F2:side:l2 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Slat/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Slat/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"design": "load"
},
"regressions/join_struts_on_bore_wall": {
"Frame/F1:+x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:+z#[F4:+y,F5:face:11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:+z#[F4:-y,F5:face:9]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:-z#[F4:+y,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:-z#[F4:-y,F5:face:3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:+y#[F3:+z,F5:face:12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:+y#[F3:-z,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:-y#[F3:+z,F5:face:9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:-y#[F3:-z,F5:face:0]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F2:side#[F5:face:18,F5:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F2:side#[F5:face:23,F5:face:25]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side#[F5:face:18,F5:face:20]": "curved.axis curved.tangent_plane",
"Frame/F2:side#[F5:face:18,F5:face:20]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F2:side#[F5:face:23,F5:face:25]": "curved.axis curved.tangent_plane",
"Frame/F2:side#[F5:face:23,F5:face:25]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:+y,F5:face:11]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:+z#[F4:+y,F5:face:11]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:+y,F5:face:11]|F4:+y#[F3:+z,F5:face:12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:+y,F5:face:11]|F5:face:11": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:-y,F5:face:9]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:+z#[F4:-y,F5:face:9]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:-y,F5:face:9]|F4:-y#[F3:+z,F5:face:9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:-y,F5:face:9]|F5:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:-x|F3:-z#[F4:+y,F5:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F3:-z#[F4:-y,F5:face:3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:+y#[F3:+z,F5:face:12]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:+y#[F3:-z,F5:face:4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:-y#[F3:+z,F5:face:9]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:-y#[F3:-z,F5:face:0]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F5:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F5:face:26": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:+y,F5:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:-z#[F4:+y,F5:face:4]|F4:+y#[F3:-z,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:+y,F5:face:4]|F5:face:4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:-y,F5:face:3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:-z#[F4:-y,F5:face:3]|F4:-y#[F3:-z,F5:face:0]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:-y,F5:face:3]|F5:face:3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:+y#[F3:+z,F5:face:12]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:+y#[F3:+z,F5:face:12]|F5:face:12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:+y#[F3:-z,F5:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:+y#[F3:-z,F5:face:4]|F5:face:4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:-y#[F3:+z,F5:face:9]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:-y#[F3:+z,F5:face:9]|F5:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:-y#[F3:-z,F5:face:0]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:-y#[F3:-z,F5:face:0]|F5:face:0": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F5:face:0": "curved.axis curved.tangent_plane",
"Frame/F5:face:11": "curved.axis curved.tangent_plane",
"Frame/F5:face:12": "curved.axis curved.tangent_plane",
"Frame/F5:face:18": "curved.axis curved.tangent_plane",
"Frame/F5:face:20": "curved.axis curved.tangent_plane",
"Frame/F5:face:21": "curved.axis curved.tangent_plane",
"Frame/F5:face:22": "curved.axis curved.tangent_plane",
"Frame/F5:face:23": "curved.axis curved.tangent_plane",
"Frame/F5:face:25": "curved.axis curved.tangent_plane",
"Frame/F5:face:26": "curved.axis curved.tangent_plane",
"Frame/F5:face:27": "curved.axis curved.tangent_plane",
"Frame/F5:face:3": "curved.axis curved.tangent_plane",
"Frame/F5:face:4": "curved.axis curved.tangent_plane",
"Frame/F5:face:9": "curved.axis curved.tangent_plane",
"Frame/body": "body.copy body.mirror body.move body.pattern",
"Frame/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:+y,F5:face:11] & F4:+y#[F3:+z,F5:face:12]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:+y,F5:face:11] & F5:face:11]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:-y,F5:face:9] & F4:-y#[F3:+z,F5:face:9]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:-y,F5:face:9] & F5:face:9]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:+y,F5:face:4] & F4:+y#[F3:-z,F5:face:4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:+y,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:-y,F5:face:3] & F4:-y#[F3:-z,F5:face:0]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:-y,F5:face:3] & F5:face:3]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:+y#[F3:+z,F5:face:12] & F5:face:12]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:+y#[F3:-z,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:-y#[F3:+z,F5:face:9] & F5:face:9]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:-y#[F3:-z,F5:face:0] & F5:face:0]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F5:face:0 & F5:face:3]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F5:face:11 & F5:face:12]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:18,F5:face:20] & F5:face:18]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:18,F5:face:20] & F5:face:20]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:23,F5:face:25] & F5:face:23]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:23,F5:face:25] & F5:face:25]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:18 & F5:face:27]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:20 & F5:face:21]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:21 & F5:face:22]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:22 & F5:face:23]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:25 & F5:face:26]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:26 & F5:face:27]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:18,F5:face:20] & F3:-x & F4:+y#[F3:-z,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:18,F5:face:20] & F3:-x & F4:-y#[F3:-z,F5:face:0] & F5:face:0]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:23,F5:face:25] & F3:-x & F4:+y#[F3:+z,F5:face:12] & F5:face:12]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:23,F5:face:25] & F3:-x & F4:-y#[F3:+z,F5:face:9] & F5:face:9]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:+y,F5:face:11] & F3:-x & F4:+y#[F3:+z,F5:face:12]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:+y,F5:face:11] & F3:-x & F5:face:11 & F5:face:21]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:-y,F5:face:9] & F3:-x & F4:-y#[F3:+z,F5:face:9]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:-y,F5:face:9] & F3:-x & F5:face:26 & F5:face:9]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:+y,F5:face:4] & F4:+y#[F3:-z,F5:face:4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:+y,F5:face:4] & F5:face:21 & F5:face:4]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:-y,F5:face:3] & F4:-y#[F3:-z,F5:face:0]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:-y,F5:face:3] & F5:face:26 & F5:face:3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/lid_ribs_flush_with_window": {
"Lid/F10:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+x|F10:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+x|F11:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+x|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l4,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l8,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-z|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F2:blend:F1:+x|F1:+y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+y|F1:-x": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:-x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l2|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l5|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:top|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+x|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:-x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:+x|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:+y|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:-x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/body": "body.copy body.mirror body.move body.pattern",
"Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+z & F10:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F10:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+z & F10:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F11:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+z & F11:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F11:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+z & F11:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l8#[F4:side:l5,F8:-y] & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l2,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l6,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l2,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l6,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l5,F8:-y] & F4:top & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F4:top & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F4:top & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F4:top & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:+y & F8:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:-x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:+y & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:+y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:+y & F8:-x & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:-x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/loft_cut_beside_round_hole": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F9:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:end|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F9:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l1|F9:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l1|F9:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l2|F9:side:l3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l3|F9:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F2:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:bottom & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F6:bottom & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F9:end & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:end & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:end & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:end & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/oblique_cut_of_cylinder": {
"ClipBody/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Tool/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1": "curved.axis curved.tangent_plane",
"Tool/F2:side:a1|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tool/body": "body.copy body.mirror body.move body.pattern",
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l3 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/oblique_cut_of_cylinder_hang": {
"ClipBody/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Tool/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1": "curved.axis curved.tangent_plane",
"Tool/F2:side:a1|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tool/body": "body.copy body.mirror body.move body.pattern",
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l3 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/ring_cut_below_recess_thin_floor": {
"Frame/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l1|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top~7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l1~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l1~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l2~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l3~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l3~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:top|F4:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:bottom|F4:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l3~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:top~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:top~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l2|F6:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l2|F6:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l2|F6:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3|F6:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3|F6:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3|F6:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3|F6:top~4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3|F6:top~5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l4|F6:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l4|F6:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l4|F6:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l5|F6:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l5|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l5|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l6|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l6|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l7|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l7|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l8": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l8|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/body": "body.copy body.mirror body.move body.pattern",
"Frame/v[F2:side:l1 & F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l2]": "vertex.point",
"Frame/v[F2:side:l1 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l4]": "vertex.point",
"Frame/v[F2:side:l1 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.point",
"Frame/v[F2:side:l1 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (2)": "vertex.point",
"Frame/v[F2:side:l1 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (3)": "vertex.point",
"Frame/v[F2:side:l1 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (4)": "vertex.point",
"Frame/v[F2:side:l1 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (5)": "vertex.point",
"Frame/v[F2:side:l1 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (6)": "vertex.point",
"Frame/v[F2:side:l1 & F2:top]": "vertex.point",
"Frame/v[F2:side:l1 & F2:top] (2)": "vertex.point",
"Frame/v[F2:side:l1 & F2:top] (3)": "vertex.point",
"Frame/v[F2:side:l1 & F2:top] (4)": "vertex.point",
"Frame/v[F2:side:l1 & F2:top] (5)": "vertex.point",
"Frame/v[F2:side:l1 & F2:top] (6)": "vertex.point",
"Frame/v[F2:side:l2 & F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Frame/v[F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.point",
"Frame/v[F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (2)": "vertex.point",
"Frame/v[F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (3)": "vertex.point",
"Frame/v[F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (4)": "vertex.point",
"Frame/v[F2:side:l2 & F2:top]": "vertex.point",
"Frame/v[F2:side:l2 & F2:top] (2)": "vertex.point",
"Frame/v[F2:side:l3 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Frame/v[F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.point",
"Frame/v[F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (2)": "vertex.point",
"Frame/v[F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (3)": "vertex.point",
"Frame/v[F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (4)": "vertex.point",
"Frame/v[F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (5)": "vertex.point",
"Frame/v[F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (6)": "vertex.point",
"Frame/v[F2:side:l3 & F2:top]": "vertex.point",
"Frame/v[F2:side:l3 & F2:top] (2)": "vertex.point",
"Frame/v[F2:side:l3 & F2:top] (3)": "vertex.point",
"Frame/v[F2:side:l3 & F2:top] (4)": "vertex.point",
"Frame/v[F2:side:l3 & F2:top] (5)": "vertex.point",
"Frame/v[F2:side:l3 & F2:top] (6)": "vertex.point",
"Frame/v[F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.point",
"Frame/v[F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (2)": "vertex.point",
"Frame/v[F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (3)": "vertex.point",
"Frame/v[F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]] (4)": "vertex.point",
"Frame/v[F2:side:l4 & F2:top]": "vertex.point",
"Frame/v[F2:side:l4 & F2:top] (2)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1]": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1] (2)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1] (3)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1] (4)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l2]": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l2] (2)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l3]": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l3] (2)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l3] (3)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l3] (4)": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l4]": "vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l4] (2)": "vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l1]": "vertex.point",
"Frame/v[F2:top & F4:side:l1] (2)": "vertex.point",
"Frame/v[F2:top & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l3]": "vertex.point",
"Frame/v[F2:top & F4:side:l3] (2)": "vertex.point",
"Frame/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l1]": "vertex.point",
"Frame/v[F4:bottom & F4:side:l1] (2)": "vertex.point",
"Frame/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l3]": "vertex.point",
"Frame/v[F4:bottom & F4:side:l3] (2)": "vertex.point",
"Frame/v[F6:side:l1 & F6:side:l2 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l1 & F6:side:l4 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l1 & F6:top]": "vertex.point",
"Frame/v[F6:side:l1 & F6:top] (2)": "vertex.point",
"Frame/v[F6:side:l1 & F6:top] (3)": "vertex.point",
"Frame/v[F6:side:l1 & F6:top] (4)": "vertex.point",
"Frame/v[F6:side:l2 & F6:side:l3 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l2 & F6:top]": "vertex.point",
"Frame/v[F6:side:l2 & F6:top] (2)": "vertex.point",
"Frame/v[F6:side:l3 & F6:side:l4 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l3 & F6:top]": "vertex.point",
"Frame/v[F6:side:l3 & F6:top] (2)": "vertex.point",
"Frame/v[F6:side:l3 & F6:top] (3)": "vertex.point",
"Frame/v[F6:side:l3 & F6:top] (4)": "vertex.point",
"Frame/v[F6:side:l4 & F6:top]": "vertex.point",
"Frame/v[F6:side:l4 & F6:top] (2)": "vertex.point",
"Frame/v[F6:side:l5 & F6:side:l6 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l5 & F6:side:l8 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l6 & F6:side:l7 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l7 & F6:side:l8 & F6:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/shallow_loft_cut_from_top_face": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F5:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F5:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:end|F5:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F5:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l1|F5:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l2|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l3|F5:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Body1/v[F2:side:l2 & F2:top]": "vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4] (2)": "vertex.point",
"Body1/v[F2:side:l3 & F2:top]": "vertex.point",
"Body1/v[F2:side:l4 & F2:top]": "vertex.point",
"Body1/v[F2:side:l4 & F2:top] (2)": "vertex.point",
"Body1/v[F2:top & F5:side:l1 & F5:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l1 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l1]": "vertex.point",
"Body1/v[F2:top & F5:side:l1] (2)": "vertex.point",
"Body1/v[F2:top & F5:side:l2 & F5:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l2]": "vertex.point",
"Body1/v[F2:top & F5:side:l2] (2)": "vertex.point",
"Body1/v[F2:top & F5:side:l3 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l3]": "vertex.point",
"Body1/v[F2:top & F5:side:l4]": "vertex.point",
"Body1/v[F5:end & F5:side:l1 & F5:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:end & F5:side:l1 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:end & F5:side:l2 & F5:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:end & F5:side:l3 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/filleted-shelled-box": {
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2~2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~1": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3~2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:side:l2|F4:inner:F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F4:inner:F2:side:l3|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F4:inner:F2:side:l4|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Body1/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2]": "vertex.point",
"Body1/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3]": "vertex.point",
"Body1/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point vertex.point+edit",
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4]": "vertex.point",
"Body1/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4]": "vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"typical/holes-pattern-chamfer": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F5:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:start|F3:bore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F3:cbore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F5:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:0": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:bore:side:0|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:bore:side:1|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]": "face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base|F3:cbore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:cbore:side:0": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l2|F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l3|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F5:blend:F2:side:l2|F2:top & F5:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F5:blend:F2:side:l3|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:start & F3:bore:side:0 & F3:bore:side:1]": "vertex.point vertex.point+edit",
"Body1/v[F2:start & F3:bore:side:0 & F3:bore:side:1] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]]": "vertex.point vertex.point+edit",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:[email protected] & F3:bore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:top & F5:blend:F2:side:l2|F2:top & F5:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:blend:F2:side:l3|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base]": "vertex.point",
"Body1/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base] (2)": "vertex.point vertex.point+edit",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]]": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]] (2)": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]]": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]] (2)": "vertex.point vertex.point+edit",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]]": "vertex.point vertex.point+edit",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]] (2)": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]]": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]] (2)": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]]": "vertex.point",
"Body1/v[F3:bore:side:[email protected] & F3:bore:side:[email protected] & F3:cbore:[email protected]] (2)": "vertex.point",
"Body1/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Body1/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point vertex.point+edit",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point vertex.point+edit",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]]": "vertex.point vertex.point+edit",
"Body1/v[F3:cbore:[email protected] & F3:cbore:side:[email protected] & F3:cbore:side:[email protected]] (2)": "vertex.point",
"design": "load"
},
"typical/loft": {
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:top|F6:side:l5": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:l6": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F6:side:l7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F6:end": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F6:end|F6:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:end|F6:side:l6": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F6:end|F6:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:end|F6:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l5|F6:side:l6": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:side:l5|F6:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l6|F6:side:l7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l7|F6:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:end & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:end & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F6:end & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:end & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/multi-body-join-cut": {
"Block/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:+x|F1:+y~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+x|F1:+y~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+x|F1:-y~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Block/F1:+x|F1:-y~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Block/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:+y": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+y|F1:-x~1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F1:+y|F1:-x~2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F1:+y|F1:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F1:+z": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F1:+z|F1:-x~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:+z|F1:-x~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F2:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F2:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F4:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F4:+y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:-x|F1:-y~1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F1:-x|F1:-y~2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F1:-x|F1:-z~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-x|F1:-z~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-x|F1:-z~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:-x|F4:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:-x|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F1:-y": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F2:side#1": "curved.axis curved.tangent_plane",
"Block/F2:side#1|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:side#2": "curved.axis curved.tangent_plane",
"Block/F2:side#2|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Block/F4:+x": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Block/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Block/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F4:+y|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F4:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:-y|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F4:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Block/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+x & F1:+y]": "vertex.point",
"Block/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+x & F1:-y]": "vertex.point",
"Block/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+y & F1:-x]": "vertex.point",
"Block/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+z & F1:-x & F4:+y]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+z & F1:-x & F4:-y]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+z & F2:side#1 & F2:side#2]": "vertex.point",
"Block/v[F1:+z & F2:side#1 & F2:side#2] (2)": "vertex.point",
"Block/v[F1:+z & F4:+x & F4:+y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+z & F4:+x & F4:-y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:-x & F1:-y]": "vertex.point",
"Block/v[F1:-x & F1:-z]": "vertex.point",
"Block/v[F1:-x & F1:-z] (2)": "vertex.point",
"Block/v[F1:-x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F1:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side#1 & F2:side#2 & F2:top]": "vertex.point",
"Block/v[F2:side#1 & F2:side#2 & F2:top] (2)": "vertex.point vertex.point+edit",
"Block/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"design": "load"
},
"typical/revolved-part": {
"Body1/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#1|F2:side:l3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#2|F2:side:l3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#3|F2:side:l3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3#1|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3#1|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3#1|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3#2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3#2|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3#3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#1|F2:side:l5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#2|F2:side:l5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#3|F2:side:l5#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l5#1|F2:side:l5#2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l5#1|F2:side:l5#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l5#1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l5#2|F2:side:l5#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l5#2|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l5#3|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Body1/F2:side:l6#1|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l6#2|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Body1/F2:side:l6#3|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l7": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5#1 & F2:side:l5#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5#1 & F2:side:l5#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5#2 & F2:side:l5#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l5#1 & F2:side:l5#2 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5#1 & F2:side:l5#3 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5#2 & F2:side:l5#3 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l6#1 & F2:side:l6#2 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l6#1 & F2:side:l6#3 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l6#2 & F2:side:l6#3 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"typical/sheet-metal-bracket": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:face:0|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F5:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F5:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:face:2|F2:face:3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F3:face:12": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]|F2:face:5#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:face:11|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:face:12|F3:face:7": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Body1/F3:face:5": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:face:7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F5:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/F5:side:c2#2": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F3:face:10 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2] & F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:face:0 & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:face:0 & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:face:0 & F5:side:c2#1 & F5:side:c2#2]": "vertex.point",
"Body1/v[F2:face:0 & F5:side:c2#1 & F5:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:2] & F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:face:1 & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F5:side:c2#1 & F5:side:c2#2]": "vertex.point",
"Body1/v[F2:face:1 & F5:side:c2#1 & F5:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/stacked-extrude": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:top": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:top|F4:side:l5": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F4:side:l5|F4:side:l6": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l5|F4:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l6|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:side:l6|F4:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F4:side:l7|F4:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l7|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l8|F4:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F4:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:top": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l5 & F4:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l5 & F4:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l6 & F4:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:top & F4:side:l7 & F4:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:side:l5 & F4:side:l6 & F4:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:side:l5 & F4:side:l8 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:side:l6 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:side:l7 & F4:side:l8 & F4:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F4:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F6:side:c1#1 & F6:side:c1#2 & F6:top]": "vertex.point",
"Body1/v[F6:side:c1#1 & F6:side:c1#2 & F6:top] (2)": "vertex.point",
"design": "load"
},
"typical/sweep": {
"Body1/F3:end": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:end|F3:side:l1#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:end|F3:side:l2#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:end|F3:side:l3#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:end|F3:side:l4#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l1#2": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l1#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l4#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#2|F3:side:l1#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l1#2|F3:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#2|F3:side:l4#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l1#[F3:end]|F3:side:l2#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:end]|F3:side:l4#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l1#[F3:start]|F3:side:l2#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:start]|F3:side:l4#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#1": "curved.axis curved.tangent_plane",
"Body1/F3:side:l2#1|F3:side:l2#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l2#1|F3:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#2": "curved.axis curved.tangent_plane",
"Body1/F3:side:l2#2|F3:side:l2#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l2#2|F3:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l2#[F3:end]|F3:side:l3#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l2#[F3:start]|F3:side:l3#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#1|F3:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l3#1|F3:side:l3#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l3#1|F3:side:l4#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#2|F3:side:l3#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l3#2|F3:side:l4#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l3#[F3:end]|F3:side:l4#[F3:end]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l3#[F3:start]|F3:side:l4#[F3:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l4#1": "curved.axis curved.tangent_plane",
"Body1/F3:side:l4#1|F3:side:l4#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l4#2": "curved.axis curved.tangent_plane",
"Body1/F3:side:l4#2|F3:side:l4#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l4#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l4#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l4#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F3:end & F3:side:l1#[F3:end] & F3:side:l2#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:end & F3:side:l1#[F3:end] & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:end & F3:side:l2#[F3:end] & F3:side:l3#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:end & F3:side:l3#[F3:end] & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#2 & F3:side:l2#1 & F3:side:l2#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#2 & F3:side:l4#1 & F3:side:l4#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#[F3:start] & F3:side:l2#1 & F3:side:l2#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#[F3:start] & F3:side:l4#1 & F3:side:l4#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#2 & F3:side:l1#[F3:end] & F3:side:l2#2 & F3:side:l2#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#2 & F3:side:l1#[F3:end] & F3:side:l4#2 & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#[F3:start] & F3:side:l2#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#[F3:start] & F3:side:l4#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#1 & F3:side:l2#2 & F3:side:l3#1 & F3:side:l3#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#1 & F3:side:l2#[F3:start] & F3:side:l3#1 & F3:side:l3#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#2 & F3:side:l2#[F3:end] & F3:side:l3#2 & F3:side:l3#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#[F3:start] & F3:side:l3#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#1 & F3:side:l3#2 & F3:side:l4#1 & F3:side:l4#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#1 & F3:side:l3#[F3:start] & F3:side:l4#1 & F3:side:l4#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#2 & F3:side:l3#[F3:end] & F3:side:l4#2 & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#[F3:start] & F3:side:l4#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/up-down-join": {
"Body1/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l10": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l10|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l8|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l9|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:bottom|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l12": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:side:l12|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l10 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l10 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start & F3:side:l12 & F3:side:l5 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l7 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l7 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l9 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:side:l7 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:side:l9 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:start & F3:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F3:bottom & F3:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F2:start & F3:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F3:bottom & F3:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F3:side:l12 & F3:side:l5]": "vertex.plane_three_points vertex.point",
"design": "load"
}
}
}
Reference in new issue View Git Blame Copy Permalink