Iraklis KourtisandClaude Opus 5.5 afcec4d0bd fix(kernel): fillets that end in faces at an angle or across two faces (#362) ...

A straight-edge fillet required each end of the edge to meet exactly one more
face, square to the edge. Now an end may meet one planar face at any angle
(the round ends in it along an exact ellipse, the cross-section slid along
the edge onto the plane) or two planar faces meeting at the end vertex: the
round ends across both and cuts back the edge between them where its
cylinder crosses it (Vida, Martin and Varady 1994: trimlines joined across
existing faces). The cylinder is swept to cover both trimmed ends. Square
ends are built as before.

This rounds the mitres where two chamfers meet at a plate's corner, and a
concave edge where a post stands on a plate (the round's end caps extend
the post's end faces); both were refused.

Fixes #215


Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

Co-authored-by: Claude Opus 5.5 <[email protected]>

2026-10-12 14:56:00 -04:00

..

iges_in

test: avoid wall-clock assertions in import budget regressions

2026-10-11 19:23:13 +02:00

step_in

Prepare independent STEP bodies concurrently on desktop (#312)

2026-10-12 11:46:32 -04:00

blend_corner.rs

feat(kernel): modifiers report exact face and edge history

2026-10-12 11:52:53 -04:00

blend_variable.rs

feat(kernel): modifiers report exact face and edge history

2026-10-12 11:52:53 -04:00

blend.rs

fix(kernel): fillets that end in faces at an angle or across two faces (#362)

2026-10-12 14:56:00 -04:00

body_lump_tests.rs

feat: preserve adaptive sketch profiles and curved modeling workflows

2026-10-11 09:06:25 -04:00

body.rs

feat(doc): persistent names follow the kernel's exact face history (#136)

2026-10-12 11:52:53 -04:00

boolean_diagnostics.rs

Report accepted Boolean retries on features and fuzz runs (#249)

2026-10-12 10:38:04 -04:00

boolean_history_tests.rs

feat(kernel): bodies joined apart report their history (#136)

2026-10-12 11:52:53 -04:00

boolean_record.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

bore_guard.rs

Prepare 0.2.0 usability release and refresh desktop demo

2026-10-11 10:55:55 -04:00

bore_union_tests.rs

Prepare 0.2.0 usability release and refresh desktop demo

2026-10-11 10:55:55 -04:00

build.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

coplanar.rs

feat(kernel): an edge's meeting sides are sets of origins (merged faces)

2026-10-12 11:52:53 -04:00

curveblend_tests.rs

Fillets along a straight edge between two cylinders: trim curved cap edges to the contacts (#238)

2026-10-12 10:25:52 -04:00

curveblend.rs

feat(kernel): modifiers report exact face and edge history

2026-10-12 11:52:53 -04:00

delete_face.rs

feat(kernel): modifiers report exact face and edge history

2026-10-12 11:52:53 -04:00

emboss.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

face_source_tests.rs

fix: restore shell and cut wall topology in 0.2.1

2026-10-11 15:17:05 -04:00

freeform.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

fuzz.rs

Report accepted Boolean retries on features and fuzz runs (#249)

2026-10-12 10:38:04 -04:00

heal.rs

feat(kernel): an edge's meeting sides are sets of origins (merged faces)

2026-10-12 11:52:53 -04:00

helix.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

history_tests.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

history.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

iges_in.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

iges_out.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

intersection_curve_tests.rs

fix: reject degenerate boolean intersection polylines

2026-10-12 08:36:40 -04:00

lib.rs

T-spline core library and sheet bodies (#250, step 1) (#337)

2026-10-12 13:46:22 -04:00

lip.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

loopblend.rs

Loop blends: accept straight wall seams that are not lines (#335)

2026-10-12 13:15:30 -04:00

measure.rs

Measure: split triangles that cut through curved faces onto the surface (trimmed faces after booleans were measured up to 15% off; 61's keyway volume now matches); oracle step check shows the original volume

2026-10-08 02:48:17 +00:00

mesh_convert.rs

Bound mesh conversion nesting certification by loop count

2026-10-12 10:06:42 -04:00

meshbody.rs

feat(kernel): exact face and edge history model

2026-10-12 11:52:53 -04:00

modify_history_tests.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

numbered.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

offset.rs

feat(kernel): modifiers report exact face and edge history

2026-10-12 11:52:53 -04:00

ops.rs

feat(kernel): bodies joined apart report their history (#136)

2026-10-12 11:52:53 -04:00

placement_tests.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

planar_regularize.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

planar_sources.rs

Fix artificial Shell wall splits on stepped bodies

2026-10-11 22:32:53 -04:00

polybool.rs

feat(kernel): an edge's meeting sides are sets of origins (merged faces)

2026-10-12 11:52:53 -04:00

polyhedron.rs

Toolbar: no cap on pinned buttons (Fixes #323) (#326)

2026-10-12 12:35:19 -04:00

prism_curve.rs

feat: preserve adaptive sketch profiles and curved modeling workflows

2026-10-11 09:06:25 -04:00

prism_lineage.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

prism_measure.rs

Prepare 0.2.0 usability release and refresh desktop demo

2026-10-11 10:55:55 -04:00

prism.rs

fix: unfold sheets shrunk by a parameter change (#349)

2026-10-12 14:15:55 -04:00

provenance.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

record_tests.rs

feat(kernel): an edge's meeting sides are sets of origins (merged faces)

2026-10-12 11:52:53 -04:00

record.rs

feat(kernel): history across coalesced stepped walls (#136)

2026-10-12 11:52:53 -04:00

refine_cache_tests.rs

Speed up cold document geometry rebuilds

2026-10-11 20:22:19 -04:00

regularization_protection_tests.rs

Fix artificial Shell wall splits on stepped bodies

2026-10-11 22:32:53 -04:00

sew.rs

feat(kernel): every boolean path reports exact face and edge history

2026-10-12 11:52:53 -04:00

shell_groups.rs

fix: join merges every body the tool meets

2026-10-11 10:41:48 -04:00

smooth_edges.rs

Prepare 0.2.0 usability release and refresh desktop demo

2026-10-11 10:55:55 -04:00

splitface.rs

feat(kernel): modifiers report exact face and edge history

2026-10-12 11:52:53 -04:00

step_out.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

step.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

surface_kind.rs

Construction axes, points and planes from model geometry (SOLID ▸ CONSTRUCT): axes through a cylinder/cone/torus, perpendicular to a face at a point, through two planes, two points or an edge; points at a vertex, through two edges, three planes, at the centre of a circle/sphere/torus, at an edge and a plane, along a path; midplane, planes through two edges or three points, tangent to a face, along a path. References (doc::construct::GeoRef) keep picked faces and edges by persistent name and resolve on each evaluation (they follow the model); results live in ModelState.construct, in the component's frame; view::construction_axes/points/planes for the viewport; kernel::face_surface for a face's analytic surface

2026-10-09 12:47:56 +00:00

surfaces.rs

T-spline core library and sheet bodies (#250, step 1) (#337)

2026-10-12 13:46:22 -04:00

sweep_path.rs

refactor(kernel): number profile loops once and record face history as faces are built

2026-10-12 11:52:53 -04:00

tests.rs

fix(kernel): fillets that end in faces at an angle or across two faces (#362)

2026-10-12 14:56:00 -04:00

thread_tests.rs

Modelled threads (Thread with modeled: true): the ISO 68-1 profile cut along a helix, M3 to M20, on shafts and in bores; running out past a free end of the face, stopping square at a set length. The groove is a watertight screw-sweep mesh (kernel::sweep_helix_mesh) cut by kernel::faceted_boolean (BSP on the faceted body, tolerance ladder checked by A−B + A∩B = A); the polygon rebuild welds vertices across grid cells, splits pinched loops, finds T-junctions through a grid, and takes the group's plane for a loop a hair off flat

2026-10-09 12:47:56 +00:00

topo.rs

Face counts: classify sliver faces from their exact surface (#308) (#357)

2026-10-12 14:35:13 -04:00

tspline.rs

T-spline core library and sheet bodies (#250, step 1) (#337)

2026-10-12 13:46:22 -04:00