feat(blocks): implement WBLOCK dialog and unify dialog buttons and radio builders

2026-09-24 16:44:24 +01:00
1 parent dddf60d79e
commit 1a6279e841
@@ -2316,6 +2316,15 @@ common =
    .specify-on-screen = تحديد على الشاشة
    .to-layout = مع التخطيط
    .us-survey-feet = أقدام مسح أمريكية
+    .entire-drawing = الرسم بالكامل
+    .delete-from-drawing = حذف من الرسم
+    .destination = الوجهة
+    .file-name-and-path = اسم الملف والمسار:
+    .insert-units-label = وحدات الإدراج:
+    .wblock-err-no-block-name = يرجى تحديد أو إدخال اسم الكتلة.
+    .wblock-err-block-not-found = الكتلة "__ocs_fmt_0__" غير موجودة في الرسم.
+    .wblock-err-no-path = يرجى تحديد اسم الملف والمسار.
+    .wblock-help-info = يقوم WBLOCK بكتابة كائنات أو كتلة أو الرسم بالكامل إلى ملف رسم جديد.
 errors =
    .save-warning = تحذير الحفظ
    .unable-to-save-drawing = تعذر حفظ الرسم
@@ -3824,6 +3833,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  حدد الكائنات:
    .block-specify-insertion-base-point = BLOCK  حدد نقطة قاعدة الإدراج:
+    .wblock-specify-insertion-base-point = WBLOCK  حدد نقطة أساس الإدراج:
 model =
    .create = إنشاء
    .boolean = عمليات منطقية
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Указване на екрана
    .to-layout = с оформлението
    .us-survey-feet = Геодезически фута (САЩ)
+    .entire-drawing = Цял чертеж
+    .delete-from-drawing = Изтриване от чертежа
+    .destination = Местоназначение
+    .file-name-and-path = Име и път на файла:
+    .insert-units-label = Мерни единици за вмъкване:
+    .wblock-err-no-block-name = Моля, изберете или въведете име на блок.
+    .wblock-err-block-not-found = Блокът "__ocs_fmt_0__" не съществува в чертежа.
+    .wblock-err-no-path = Моля, задайте име и път на файла.
+    .wblock-help-info = WBLOCK записва обекти, блок или целия чертеж в нов чертожен файл.
 errors =
    .save-warning = Предупреждение при запазване
    .unable-to-save-drawing = Чертежът не може да бъде запазен
@@ -3811,6 +3820,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Изберете обекти:
    .block-specify-insertion-base-point = BLOCK  Укажете базова точка на вмъкване:
+    .wblock-specify-insertion-base-point = WBLOCK  Задайте базова точка на вмъкване:
 model =
    .create = Създаване
    .boolean = Булеви операции
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Zadat na obrazovce
    .to-layout = rozvržení
    .us-survey-feet = Zeměměřické stopy (USA)
+    .entire-drawing = Celý výkres
+    .delete-from-drawing = Vymazat z výkresu
+    .destination = Cíl
+    .file-name-and-path = Název souboru a cesta:
+    .insert-units-label = Jednotky vložení:
+    .wblock-err-no-block-name = Vyberte nebo zadejte název bloku.
+    .wblock-err-block-not-found = Blok "__ocs_fmt_0__" ve výkresu neexistuje.
+    .wblock-err-no-path = Zadejte název souboru a cestu.
+    .wblock-help-info = WBLOCK zapíše objekty, blok nebo celý výkres do nového výkresového souboru.
 errors =
    .save-warning = Uložit varování
    .unable-to-save-drawing = Nákres nelze uložit
@@ -3809,6 +3818,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Vyberte objekty:
    .block-specify-insertion-base-point = BLOCK  Zadejte základní bod vložení:
+    .wblock-specify-insertion-base-point = WBLOCK  Určete základní bod vložení:
 model =
    .create = Vytvořit
    .boolean = Booleovské operace
@@ -2304,6 +2304,15 @@ common =
    .specify-on-screen = Am Bildschirm bestimmen
    .to-layout = an Layout
    .us-survey-feet = US-Vermessungsfuß
+    .entire-drawing = Gesamte Zeichnung
+    .delete-from-drawing = Aus Zeichnung löschen
+    .destination = Ziel
+    .file-name-and-path = Dateiname und Pfad:
+    .insert-units-label = Einfüge-Einheiten:
+    .wblock-err-no-block-name = Bitte wählen Sie einen Blocknamen aus oder geben Sie ihn ein.
+    .wblock-err-block-not-found = Block "__ocs_fmt_0__" ist in der Zeichnung nicht vorhanden.
+    .wblock-err-no-path = Bitte geben Sie einen Dateinamen und Pfad an.
+    .wblock-help-info = WBLOCK schreibt Objekte, einen Block oder die gesamte Zeichnung in eine neue Zeichnungsdatei.
 errors =
    .save-warning = Warnhinweise speichern
    .unable-to-save-drawing = Zeichnung konnte nicht gespeichert werden
@@ -3810,6 +3819,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Objekte auswählen:
    .block-specify-insertion-base-point = BLOCK  Einfügebasispunkt angeben:
+    .wblock-specify-insertion-base-point = WBLOCK  Basispunkt für Einfügung angeben:
 model =
    .create = Erstellen
    .boolean = Boolesche Operationen
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Καθορισμός στην οθόνη
    .to-layout = με τη διάταξη
    .us-survey-feet = Τοπογραφικά πόδια ΗΠΑ
+    .entire-drawing = Ολόκληρο σχέδιο
+    .delete-from-drawing = Διαγραφή από το σχέδιο
+    .destination = Προορισμός
+    .file-name-and-path = Όνομα και διαδρομή αρχείου:
+    .insert-units-label = Μονάδες εισαγωγής:
+    .wblock-err-no-block-name = Επιλέξτε ή πληκτρολογήστε ένα όνομα μπλοκ.
+    .wblock-err-block-not-found = Το μπλοκ "__ocs_fmt_0__" δεν υπάρχει στο σχέδιο.
+    .wblock-err-no-path = Καθορίστε ένα όνομα και διαδρομή αρχείου.
+    .wblock-help-info = Η εντολή WBLOCK εγγράφει αντικείμενα, ένα μπλοκ ή ολόκληρο το σχέδιο σε ένα νέο αρχείο σχεδίου.
 errors =
    .save-warning = Προειδοποίηση αποθήκευσης
    .unable-to-save-drawing = Αδυναμία αποθήκευσης σχεδίου
@@ -3812,6 +3821,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Επιλέξτε αντικείμενα:
    .block-specify-insertion-base-point = BLOCK  Καθορίστε σημείο βάσης εισαγωγής:
+    .wblock-specify-insertion-base-point = WBLOCK  Καθορίστε σημείο βάσης εισαγωγής:
 model =
    .create = Δημιουργία
    .boolean = Δυαδική πράξη
@@ -2304,6 +2304,16 @@ common =
    .specify-on-screen = Specify On-screen
    .to-layout = to layout
    .us-survey-feet = US Survey Feet
+    .entire-drawing = Entire drawing
+    .delete-from-drawing = Delete from drawing
+    .destination = Destination
+    .file-name-and-path = File name and path:
+    .insert-units-label = Insert units:
+    .wblock-err-no-block-name = Please select or enter a block name.
+    .wblock-err-block-not-found = Block "__ocs_fmt_0__" does not exist in drawing.
+    .wblock-err-no-path = Please specify a file name and path.
+    .wblock-err-current-drawing = Cannot write to the current drawing file.
+    .wblock-help-info = WBLOCK writes objects, a block, or the entire drawing to a new drawing file.
 errors =
    .save-warning = Save Warning
    .unable-to-save-drawing = Unable to Save Drawing
@@ -3813,6 +3823,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Select objects:
    .block-specify-insertion-base-point = BLOCK  Specify insertion base point:
+    .wblock-specify-insertion-base-point = WBLOCK  Specify insertion base point:
 model =
    .create = Create
    .boolean = Boolean
@@ -2304,6 +2304,15 @@ common =
    .specify-on-screen = Precisar en pantalla
    .to-layout = a la presentación
    .us-survey-feet = Pies de agrimensura de EE. UU.
+    .entire-drawing = Dibujo completo
+    .delete-from-drawing = Suprimir del dibujo
+    .destination = Destino
+    .file-name-and-path = Nombre de archivo y ruta:
+    .insert-units-label = Unidades de inserción:
+    .wblock-err-no-block-name = Seleccione o escriba un nombre de bloque.
+    .wblock-err-block-not-found = El bloque "__ocs_fmt_0__" no existe en el dibujo.
+    .wblock-err-no-path = Especifique un nombre de archivo y una ruta.
+    .wblock-help-info = WBLOCK escribe objetos, un bloque o el dibujo completo en un nuevo archivo de dibujo.
 errors =
    .save-warning = Advertencia de guardado
    .unable-to-save-drawing = No se puede guardar el dibujo
@@ -3812,6 +3821,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Designar objetos:
    .block-specify-insertion-base-point = BLOCK  Precise punto base de inserción:
+    .wblock-specify-insertion-base-point = WBLOCK  Precise punto base de inserción:
 model =
    .create = Crear
    .boolean = Booleanas
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Määritä näytöltä
    .to-layout = asetteluun
    .us-survey-feet = US Survey -jalat
+    .entire-drawing = Koko piirustus
+    .delete-from-drawing = Poista piirustuksesta
+    .destination = Kohde
+    .file-name-and-path = Tiedoston nimi ja polku:
+    .insert-units-label = Lisäysyksiköt:
+    .wblock-err-no-block-name = Valitse tai anna lohkon nimi.
+    .wblock-err-block-not-found = Lohkoa "__ocs_fmt_0__" ei ole piirustuksessa.
+    .wblock-err-no-path = Määritä tiedoston nimi ja polku.
+    .wblock-help-info = WBLOCK kirjoittaa kohteet, lohkon tai koko piirustuksen uuteen piirustustiedostoon.
 errors =
    .save-warning = Tallenna varoitus
    .unable-to-save-drawing = Piirustusta ei voi tallentaa
@@ -3811,6 +3820,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Valitse kohteet:
    .block-specify-insertion-base-point = BLOCK  Määritä sijoituksen peruspiste:
+    .wblock-specify-insertion-base-point = WBLOCK  Määritä lisäyksen peruspiste:
 model =
    .create = Luo
    .boolean = Boolen operaatiot
@@ -2304,6 +2304,15 @@ common =
    .specify-on-screen = Spécifier à l'écran
    .to-layout = sur la présentation
    .us-survey-feet = Pieds d'arpentage US
+    .entire-drawing = Dessin entier
+    .delete-from-drawing = Supprimer du dessin
+    .destination = Destination
+    .file-name-and-path = Nom de fichier et chemin d'accès :
+    .insert-units-label = Unités d'insertion :
+    .wblock-err-no-block-name = Veuillez sélectionner ou entrer un nom de bloc.
+    .wblock-err-block-not-found = Le bloc « __ocs_fmt_0__ » n'existe pas dans le dessin.
+    .wblock-err-no-path = Veuillez spécifier un nom de fichier et un chemin d'accès.
+    .wblock-help-info = WBLOCK écrit des objets, un bloc ou l'ensemble du dessin dans un nouveau fichier de dessin.
 errors =
    .save-warning = Enregistrer l' avertissement
    .unable-to-save-drawing = Impossible de sauvegarder le dessin
@@ -3812,6 +3821,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Sélectionnez les objets :
    .block-specify-insertion-base-point = BLOCK  Spécifiez le point de base d'insertion :
+    .wblock-specify-insertion-base-point = WBLOCK  Spécifiez le point de base d'insertion :
 model =
    .create = Créer
    .boolean = Opérations booléennes
@@ -2292,6 +2292,15 @@ common =
    .specify-on-screen = स्क्रीन पर निर्दिष्ट करें
    .to-layout = लेआउट के अनुसार
    .us-survey-feet = यूएस सर्वेक्षण फीट
+    .entire-drawing = संपूर्ण रेखाचित्र
+    .delete-from-drawing = रेखाचित्र से हटाएं
+    .destination = गंतव्य
+    .file-name-and-path = फ़ाइल का नाम और पथ:
+    .insert-units-label = सम्मिलन इकाइयाँ:
+    .wblock-err-no-block-name = कृपया एक ब्लॉक नाम चुनें या दर्ज करें।
+    .wblock-err-block-not-found = ब्लॉक "__ocs_fmt_0__" रेखाचित्र में मौजूद नहीं है।
+    .wblock-err-no-path = कृपया फ़ाइल का नाम और पथ निर्दिष्ट करें।
+    .wblock-help-info = WBLOCK ऑब्जेक्ट, एक ब्लॉक, या संपूर्ण रेखाचित्र को एक नई रेखाचित्र फ़ाइल में लिखता है।
 errors =
    .save-warning = चेतावनी सहेजें
    .unable-to-save-drawing = ड्रॉइंग सहेजी नहीं जा सकी
@@ -3800,6 +3809,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  ऑब्जेक्ट चुनें:
    .block-specify-insertion-base-point = BLOCK  सम्मिलन आधार बिंदु निर्दिष्ट करें:
+    .wblock-specify-insertion-base-point = WBLOCK  सम्मिलन आधार बिंदु निर्दिष्ट करें:
 model =
    .create = बनाएँ
    .boolean = बूलियन संक्रियाएँ
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Megadás a képernyőn
    .to-layout = az elrendezéshez
    .us-survey-feet = USA geodéziai láb
+    .entire-drawing = Teljes rajz
+    .delete-from-drawing = Törlés a rajzból
+    .destination = Cél
+    .file-name-and-path = Fájlnév és elérési út:
+    .insert-units-label = Beillesztési mértékegységek:
+    .wblock-err-no-block-name = Válasszon vagy adjon meg egy blokknevet.
+    .wblock-err-block-not-found = A(z) "__ocs_fmt_0__" blokk nem létezik a rajzban.
+    .wblock-err-no-path = Adja meg a fájlnevet és az elérési utat.
+    .wblock-help-info = A WBLOCK objektumokat, egy blokkot vagy a teljes rajzot új rajzfájlba menti.
 errors =
    .save-warning = Figyelmeztetés mentése
    .unable-to-save-drawing = Nem sikerült menteni a rajzot
@@ -3811,6 +3820,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Válasszon objektumokat:
    .block-specify-insertion-base-point = BLOCK  Adja meg a beillesztési bázispontot:
+    .wblock-specify-insertion-base-point = WBLOCK  Adja meg a beillesztési bázispontot:
 model =
    .create = Létrehozás
    .boolean = Logikai műveletek
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Specifica sullo schermo
    .to-layout = al layout
    .us-survey-feet = Piedi topografici USA
+    .entire-drawing = Intero disegno
+    .delete-from-drawing = Elimina dal disegno
+    .destination = Destinazione
+    .file-name-and-path = Nome file e percorso:
+    .insert-units-label = Unità di inserimento:
+    .wblock-err-no-block-name = Selezionare o immettere il nome di un blocco.
+    .wblock-err-block-not-found = Il blocco "__ocs_fmt_0__" non esiste nel disegno.
+    .wblock-err-no-path = Specificare un nome file e un percorso.
+    .wblock-help-info = WBLOCK scrive gli oggetti, un blocco o l'intero disegno in un nuovo file di disegno.
 errors =
    .save-warning = Salva avviso
    .unable-to-save-drawing = Impossibile salvare il disegno
@@ -3811,6 +3820,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Selezionare oggetti:
    .block-specify-insertion-base-point = BLOCK  Specificare punto base di inserimento:
+    .wblock-specify-insertion-base-point = WBLOCK  Specificare il punto base di inserimento:
 model =
    .create = Crea
    .boolean = Operazioni booleane
@@ -2294,6 +2294,15 @@ common =
    .specify-on-screen = 画面上で指定
    .to-layout = レイアウトに合わせる
    .us-survey-feet = 米国測量フィート
+    .entire-drawing = 図面全体
+    .delete-from-drawing = 図面から削除
+    .destination = 保存先
+    .file-name-and-path = ファイル名とパス:
+    .insert-units-label = 挿入単位:
+    .wblock-err-no-block-name = ブロック名を選択または入力してください。
+    .wblock-err-block-not-found = ブロック "__ocs_fmt_0__" は図面に存在しません。
+    .wblock-err-no-path = ファイル名とパスを指定してください。
+    .wblock-help-info = WBLOCK はオブジェクト、ブロック、または図面全体を新しい図面ファイルに書き出します。
 errors =
    .save-warning = 保存の警告
    .unable-to-save-drawing = 図面を保存できません
@@ -3800,6 +3809,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  オブジェクトを選択:
    .block-specify-insertion-base-point = BLOCK  挿入基点を指定:
+    .wblock-specify-insertion-base-point = WBLOCK  挿入基点を指定:
 model =
    .create = 作成
    .boolean = ブール演算
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = 화면상에 지정
    .to-layout = 배치에 맞춤
    .us-survey-feet = 미국 측량 피트
+    .entire-drawing = 도면 전체
+    .delete-from-drawing = 도면에서 삭제
+    .destination = 대상
+    .file-name-and-path = 파일 이름 및 경로:
+    .insert-units-label = 삽입 단위:
+    .wblock-err-no-block-name = 블록 이름을 선택하거나 입력하십시오.
+    .wblock-err-block-not-found = 블록 "__ocs_fmt_0__"이(가) 도면에 존재하지 않습니다.
+    .wblock-err-no-path = 파일 이름과 경로를 지정하십시오.
+    .wblock-help-info = WBLOCK은 객체, 블록 또는 도면 전체를 새 도면 파일로 내보냅니다.
 errors =
    .save-warning = 경고 저장
    .unable-to-save-drawing = 도면을 저장할 수 없습니다
@@ -3811,6 +3820,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  객체 선택:
    .block-specify-insertion-base-point = BLOCK  삽입 기준점 지정:
+    .wblock-specify-insertion-base-point = WBLOCK  삽입 기준점 지정:
 model =
    .create = 생성
    .boolean = 불리언 연산
@@ -2304,6 +2304,15 @@ common =
    .specify-on-screen = Op scherm opgeven
    .to-layout = aan lay-out
    .us-survey-feet = US Survey Feet
+    .entire-drawing = Volledige tekening
+    .delete-from-drawing = Verwijderen uit tekening
+    .destination = Bestemming
+    .file-name-and-path = Bestandsnaam en pad:
+    .insert-units-label = Invoegeenheden:
+    .wblock-err-no-block-name = Selecteer of voer een bloknaam in.
+    .wblock-err-block-not-found = Blok "__ocs_fmt_0__" bestaat niet in de tekening.
+    .wblock-err-no-path = Geef een bestandsnaam en pad op.
+    .wblock-help-info = WBLOCK schrijft objecten, een blok of de volledige tekening naar een nieuw tekeningbestand.
 errors =
    .save-warning = Waarschuwing opslaan
    .unable-to-save-drawing = Kan tekening niet opslaan
@@ -3810,6 +3819,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Objecten selecteren:
    .block-specify-insertion-base-point = BLOCK  Invoegbasispunt opgeven:
+    .wblock-specify-insertion-base-point = WBLOCK  Geef basisinvoegpunt op:
 model =
    .create = Maken
    .boolean = Booleaanse bewerkingen
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = Określ na ekranie
    .to-layout = do układu
    .us-survey-feet = Stopy geodezyjne USA
+    .entire-drawing = Cały rysunek
+    .delete-from-drawing = Usuń z rysunku
+    .destination = Cel
+    .file-name-and-path = Nazwa pliku i ścieżka:
+    .insert-units-label = Jednostki wstawiania:
+    .wblock-err-no-block-name = Wybierz lub wprowadź nazwę bloku.
+    .wblock-err-block-not-found = Blok „__ocs_fmt_0__” nie istnieje w rysunku.
+    .wblock-err-no-path = Podaj nazwę pliku i ścieżkę.
+    .wblock-help-info = WBLOCK zapisuje obiekty, blok lub cały rysunek do nowego pliku rysunku.
 errors =
    .save-warning = Zapisz ostrzeżenie
    .unable-to-save-drawing = Nie można zapisać rysunku
@@ -3811,6 +3820,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Wybierz obiekty:
    .block-specify-insertion-base-point = BLOCK  Określ bazowy punkt wstawienia:
+    .wblock-specify-insertion-base-point = WBLOCK  Określ punkt bazowy wstawienia:
 model =
    .create = Utwórz
    .boolean = Operacje boolowskie
@@ -2304,6 +2304,15 @@ common =
    .specify-on-screen = Especificar na tela
    .to-layout = ao layout
    .us-survey-feet = Pés topográficos dos EUA
+    .entire-drawing = Desenho inteiro
+    .delete-from-drawing = Excluir do desenho
+    .destination = Destino
+    .file-name-and-path = Nome do arquivo e caminho:
+    .insert-units-label = Unidades de inserção:
+    .wblock-err-no-block-name = Selecione ou insira o nome de um bloco.
+    .wblock-err-block-not-found = O bloco "__ocs_fmt_0__" não existe no desenho.
+    .wblock-err-no-path = Especifique um nome de arquivo e caminho.
+    .wblock-help-info = O WBLOCK grava objetos, um bloco ou o desenho inteiro em um novo arquivo de desenho.
 errors =
    .save-warning = Aviso de salvamento
    .unable-to-save-drawing = Não foi possível salvar o desenho
@@ -3812,6 +3821,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Selecionar objetos:
    .block-specify-insertion-base-point = BLOCK  Especificar ponto base de inserção:
+    .wblock-specify-insertion-base-point = WBLOCK  Especifique o ponto base de inserção:
 model =
    .create = Criar
    .boolean = Operações booleanas
@@ -2307,6 +2307,15 @@ common =
    .specify-on-screen = Указать на экране
    .to-layout = с листом
    .us-survey-feet = Геодезические футы США
+    .entire-drawing = Весь чертеж
+    .delete-from-drawing = Удалить из чертежа
+    .destination = Место назначения
+    .file-name-and-path = Имя файла и путь:
+    .insert-units-label = Единицы вставки:
+    .wblock-err-no-block-name = Выберите или введите имя блока.
+    .wblock-err-block-not-found = Блок "__ocs_fmt_0__" отсутствует в чертеже.
+    .wblock-err-no-path = Укажите имя файла и путь к нему.
+    .wblock-help-info = WBLOCK записывает объекты, блок или весь чертеж в новый файл чертежа.
 errors =
    .save-warning = Спасти предостережение
    .unable-to-save-drawing = Не удалось сохранить чертёж
@@ -3813,6 +3822,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Выберите объекты:
    .block-specify-insertion-base-point = BLOCK  Укажите базовую точку вставки:
+    .wblock-specify-insertion-base-point = WBLOCK  Укажите базовую точку вставки:
 model =
    .create = Создание
    .boolean = Булевы операции
@@ -2288,6 +2288,15 @@ common =
    .specify-on-screen = Ekranda Belirt
    .to-layout = düzene
    .us-survey-feet = ABD Ölçüm Fiti
+    .entire-drawing = Tüm çizim
+    .delete-from-drawing = Çizimden sil
+    .destination = Hedef
+    .file-name-and-path = Dosya adı ve yolu:
+    .insert-units-label = Ekleme birimleri:
+    .wblock-err-no-block-name = Lütfen bir blok adı seçin veya girin.
+    .wblock-err-block-not-found = "__ocs_fmt_0__" bloğu çizimde mevcut değil.
+    .wblock-err-no-path = Lütfen bir dosya adı ve yolu belirtin.
+    .wblock-help-info = WBLOCK nesneleri, bir bloğu veya tüm çizimi yeni bir çizim dosyasına yazar.
 errors =
    .save-warning = Kaydetme Uyarısı
    .unable-to-save-drawing = Çizim Kaydedilemiyor
@@ -3772,6 +3781,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  Nesneleri seçin:
    .block-specify-insertion-base-point = BLOCK  Ekleme taban noktasını belirtin:
+    .wblock-specify-insertion-base-point = WBLOCK  Ekleme taban noktasını belirleyin:
 model =
    .create = Oluştur
    .boolean = Boole işlemleri
@@ -2291,6 +2291,15 @@ common =
    .specify-on-screen = 在屏幕上指定
    .to-layout = 匹配到布局
    .us-survey-feet = 美国测量英尺
+    .entire-drawing = 整个图形
+    .delete-from-drawing = 从图形中删除
+    .destination = 目标
+    .file-name-and-path = 文件名和路径:
+    .insert-units-label = 插入单位:
+    .wblock-err-no-block-name = 请选择或输入块名称。
+    .wblock-err-block-not-found = 图形中不存在块“__ocs_fmt_0__”。
+    .wblock-err-no-path = 请指定文件名和路径。
+    .wblock-help-info = WBLOCK 将对象、块或整个图形写入新的图形文件。
 errors =
    .save-warning = 保存警告
    .unable-to-save-drawing = 无法保存图形
@@ -3795,6 +3804,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  选择对象:
    .block-specify-insertion-base-point = BLOCK  指定插入基点:
+    .wblock-specify-insertion-base-point = WBLOCK  指定插入基点:
 model =
    .create = 创建
    .boolean = 布尔运算
@@ -2303,6 +2303,15 @@ common =
    .specify-on-screen = 在螢幕上指定
    .to-layout = 與配置相符
    .us-survey-feet = 美國測量英呎
+    .entire-drawing = 整個圖面
+    .delete-from-drawing = 從圖面中刪除
+    .destination = 目標
+    .file-name-and-path = 檔名和路徑:
+    .insert-units-label = 插入單位:
+    .wblock-err-no-block-name = 請選取或輸入圖塊名稱。
+    .wblock-err-block-not-found = 圖面中不存在圖塊「__ocs_fmt_0__」。
+    .wblock-err-no-path = 請指定檔名和路徑。
+    .wblock-help-info = WBLOCK 將物件、圖塊或整個圖面寫入新的圖面檔案。
 errors =
    .save-warning = 儲存警告
    .unable-to-save-drawing = 無法儲存圖形
@@ -3807,6 +3816,7 @@ insert =
    .xref = XREF: __ocs_fmt_0__
    .block-select-objects = BLOCK  選取物件:
    .block-specify-insertion-base-point = BLOCK  指定插入基準點:
+    .wblock-specify-insertion-base-point = WBLOCK  指定插入基準點:
 model =
    .create = 建立
    .boolean = 布林運算
@@ -460,6 +460,41 @@ impl OpenCADStudio {
                self.active_modal = Some(crate::app::ModalKind::BlockDefinition);
            }

+            cmd if cmd.starts_with("WBLOCK_POINT_PICKED ") => {
+                let parts: Vec<f64> = cmd["WBLOCK_POINT_PICKED ".len()..]
+                    .split_whitespace()
+                    .filter_map(|s| s.parse::<f64>().ok())
+                    .collect();
+                if parts.len() == 3 {
+                    if let Some(state) = self.wblock.as_mut() {
+                        state.base_point_x = format!("{:.4}", parts[0]);
+                        state.base_point_y = format!("{:.4}", parts[1]);
+                        state.base_point_z = format!("{:.4}", parts[2]);
+                    }
+                }
+                self.tabs[i].active_cmd = None;
+                self.active_modal = Some(crate::app::ModalKind::WriteBlock);
+            }
+
+            "WBLOCK_POINT_CANCELLED" => {
+                self.tabs[i].active_cmd = None;
+                self.active_modal = Some(crate::app::ModalKind::WriteBlock);
+            }
+
+            "WBLOCK_OBJECTS_GATHERED" => {
+                let handles: Vec<_> = self.tabs[i]
+                    .scene
+                    .selected_entities()
+                    .into_iter()
+                    .map(|(h, _)| h)
+                    .collect();
+                if let Some(state) = self.wblock.as_mut() {
+                    state.selected_handles = handles;
+                }
+                self.tabs[i].active_cmd = None;
+                self.active_modal = Some(crate::app::ModalKind::WriteBlock);
+            }
+
            "INSERT" => {
                let blocks = self.tabs[i].scene.custom_block_names();
                if blocks.is_empty() {
@@ -663,9 +698,60 @@ impl OpenCADStudio {
            "PDFATTACH" => {
                return Some(Task::done(Message::PdfAttachPick));
            }
-            cmd if cmd == "WBLOCK" || cmd == "WB" || cmd.starts_with("WBLOCK ") => {
-                let arg = cmd.splitn(2, ' ').nth(1).unwrap_or("").trim();
-                if arg.is_empty() {
+            "XATTACH" => {
+                // Launch the file picker; XAttachPickResult will start the command.
+                return Some(Task::done(Message::XAttachPick));
+            }
+            "WBLOCK" | "WB" => {
+                let handles: Vec<_> = self.tabs[i]
+                    .scene
+                    .selected_entities()
+                    .into_iter()
+                    .map(|(h, _)| h)
+                    .collect();
+                let existing_blocks = self.tabs[i].scene.custom_block_names();
+                let default_unit = self.tabs[i].scene.document.header.insertion_units;
+                let default_folder = self.tabs[i]
+                    .current_path
+                    .as_ref()
+                    .and_then(|p| p.parent())
+                    .map(|p| p.to_string_lossy().to_string())
+                    .unwrap_or_default();
+                let default_path = if default_folder.is_empty() {
+                    "new_block.dwg".to_string()
+                } else {
+                    format!("{}/new_block.dwg", default_folder.replace('\\', "/"))
+                };
+                self.wblock = Some(
+                    crate::ui::window::wblock::WblockState::new(
+                        existing_blocks,
+                        handles,
+                        default_unit,
+                        default_path,
+                    ),
+                );
+                self.active_modal = Some(crate::app::ModalKind::WriteBlock);
+            }
+
+            cmd if cmd == "-WBLOCK"
+                || cmd == "-WB"
+                || cmd.starts_with("-WBLOCK ")
+                || cmd.starts_with("-WB ")
+                || cmd.starts_with("WBLOCK ")
+                || cmd.starts_with("WB ") =>
+            {
+                let rest = if let Some(r) = cmd.strip_prefix("-WBLOCK") {
+                    r.trim()
+                } else if let Some(r) = cmd.strip_prefix("-WB") {
+                    r.trim()
+                } else if let Some(r) = cmd.strip_prefix("WBLOCK") {
+                    r.trim()
+                } else if let Some(r) = cmd.strip_prefix("WB") {
+                    r.trim()
+                } else {
+                    ""
+                };
+                if rest.is_empty() {
                    // No argument: use selected entities (*) if any, else ask.
                    let sel: Vec<_> = self.tabs[i].scene.selected.iter().copied().collect();
                    if sel.is_empty() {
@@ -676,7 +762,7 @@ impl OpenCADStudio {
                        return Some(Task::done(Message::WblockSave("*".to_string())));
                    }
                } else {
-                    return Some(Task::done(Message::WblockSave(arg.to_string())));
+                    return Some(Task::done(Message::WblockSave(rest.to_string())));
                }
            }

@@ -495,6 +495,8 @@ pub(super) struct OpenCADStudio {
    block_definition: Option<crate::ui::window::block_definition::BlockDefinitionState>,
    /// Working copy of the Attach External Reference dialog; None while closed.
    xref_attach: Option<crate::ui::window::xref_attach::XrefAttachState>,
+    /// Working copy of the Write Block (WBLOCK) dialog; `None` while it is closed.
+    wblock: Option<crate::ui::window::wblock::WblockState>,
    /// Working copy of the structured feature-control-frame editor.
    geometric_tolerance: Option<crate::ui::window::geometric_tolerance::State>,
    /// PICKDRAG (#226): false (default) = press-drag lassoes; true =
@@ -1883,6 +1885,7 @@ pub enum ModalKind {
    DrawingUnits,
    BlockDefinition,
    XrefAttach,
+    WriteBlock,
    GeometricTolerance,
    DraftingSettings,
    AutoConstrainSettings,
@@ -2880,6 +2883,24 @@ pub enum Message {
    BlockDefConfirmRedefine(bool),
    BlockDefDismissError,
    BlockDefHelp,
+    /// Write Block (WBLOCK) dialog messages
+    WblockSourceMode(crate::ui::window::wblock::WblockSourceMode),
+    WblockBlockName(String),
+    WblockBlockSelect(String),
+    WblockPickPoint,
+    WblockBaseX(String),
+    WblockBaseY(String),
+    WblockBaseZ(String),
+    WblockSelectObjects,
+    WblockQuickSelect,
+    WblockObjectMode(crate::ui::window::wblock::WblockObjectMode),
+    WblockFilePath(String),
+    WblockBrowsePath,
+    WblockBrowsePathResult(Option<std::path::PathBuf>),
+    WblockUnit(i16),
+    WblockApply,
+    WblockDismissError,
+    WblockHelp,
    /// One structured feature-control-frame field changed.
    ToleranceDialogField(crate::ui::window::geometric_tolerance::Field),
    /// One structured feature-control-frame option changed.
@@ -3962,6 +3983,7 @@ impl OpenCADStudio {
            drawing_units: None,
            block_definition: None,
            xref_attach: None,
+            wblock: None,
            geometric_tolerance: None,
            pick_drag_rect: false,
            perf_hud: false,
@@ -1163,6 +1163,8 @@ pub(super) fn on_tab_close(&mut self, idx: usize) -> Task<Message> {
                    self.reset_modal_geometry();
                    if self.block_definition.is_some() {
                        self.active_modal = Some(crate::app::ModalKind::BlockDefinition);
+                    } else if self.wblock.is_some() {
+                        self.active_modal = Some(crate::app::ModalKind::WriteBlock);
                    }
                    return Task::none();
                }
@@ -209,6 +209,7 @@ impl OpenCADStudio {
            Some(GeometricTolerance) => self.geometric_tolerance = None,
            Some(BlockDefinition) => self.block_definition = None,
            Some(XrefAttach) => self.xref_attach = None,
+            Some(WriteBlock) => self.wblock = None,
            Some(Hyperlink) => {
                self.hyperlink_editor_handles.clear();
                self.hyperlink_editor_url.clear();
@@ -346,6 +347,14 @@ impl OpenCADStudio {
                        }
                    }
                }
+                if self.active_modal == Some(super::ModalKind::WriteBlock) {
+                    if let Some(ref mut state) = self.wblock {
+                        if state.error_message.is_some() {
+                            state.error_message = None;
+                            return Task::none();
+                        }
+                    }
+                }
                return self.update(Message::CloseModal);
            }
            if self.active_modal == Some(super::ModalKind::BlockDefinition) {
@@ -362,6 +371,13 @@ impl OpenCADStudio {
                    }
                }
            }
+            if self.active_modal == Some(super::ModalKind::WriteBlock) {
+                if matches!(msg, Message::CommandFinalize)
+                    || matches!(&msg, Message::ShortcutPressed(key) if key.rsplit('+').next() == Some("ENTER") || key.rsplit('+').next() == Some("RETURN"))
+                {
+                    return self.update(Message::WblockApply);
+                }
+            }
            if is_modal_blocked_key_msg(&msg) {
                return Task::none();
            }
@@ -4950,6 +4966,294 @@ impl OpenCADStudio {
                }
                self.commit_block_definition(false)
            }
+            Message::WblockSourceMode(mode) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.source_mode = mode;
+                }
+                Task::none()
+            }
+            Message::WblockBlockName(name) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.block_name = name;
+                }
+                Task::none()
+            }
+            Message::WblockBlockSelect(name) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.block_name = name.clone();
+                    let trimmed = name.trim();
+                    if !trimmed.is_empty() {
+                        let current_path = std::path::Path::new(&state.file_path);
+                        let file_stem = current_path.file_stem().and_then(|s| s.to_str());
+                        let is_default_or_block = file_stem == Some("new_block")
+                            || state.existing_blocks.iter().any(|b| Some(b.as_str()) == file_stem);
+                        if is_default_or_block {
+                            let new_file_name = format!("{}.dwg", trimmed);
+                            if let Some(parent) = current_path.parent() {
+                                if !parent.as_os_str().is_empty() {
+                                    state.file_path = parent.join(new_file_name).to_string_lossy().to_string();
+                                } else {
+                                    state.file_path = new_file_name;
+                                }
+                            } else {
+                                state.file_path = new_file_name;
+                            }
+                        }
+                    }
+                }
+                Task::none()
+            }
+            Message::WblockPickPoint => {
+                self.active_modal = None;
+                let cmd = crate::modules::insert::wblock::WblockPickBasePointCommand;
+                self.command_line.push_info(&cmd.prompt());
+                self.tabs[self.active_tab].active_cmd = Some(Box::new(cmd));
+                Task::none()
+            }
+            Message::WblockBaseX(val) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.base_point_x = val;
+                }
+                Task::none()
+            }
+            Message::WblockBaseY(val) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.base_point_y = val;
+                }
+                Task::none()
+            }
+            Message::WblockBaseZ(val) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.base_point_z = val;
+                }
+                Task::none()
+            }
+            Message::WblockSelectObjects => {
+                self.active_modal = None;
+                use crate::modules::draw::select::SelectObjectsCommand;
+                let cmd = SelectObjectsCommand::plain("WBLOCK", "WBLOCK_OBJECTS_GATHERED");
+                self.command_line.push_info(&cmd.prompt());
+                self.tabs[self.active_tab].active_cmd = Some(Box::new(cmd));
+                Task::none()
+            }
+            Message::WblockQuickSelect => {
+                self.active_modal = None;
+                self.on_qselect_open()
+            }
+            Message::WblockObjectMode(mode) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.object_mode = mode;
+                }
+                Task::none()
+            }
+            Message::WblockFilePath(path) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.file_path = path;
+                }
+                Task::none()
+            }
+            Message::WblockBrowsePath => {
+                let default_name = if let Some(state) = self.wblock.as_ref() {
+                    let p = std::path::Path::new(&state.file_path);
+                    p.file_name()
+                        .and_then(|f| f.to_str())
+                        .unwrap_or("new_block.dwg")
+                        .to_string()
+                } else {
+                    "new_block.dwg".to_string()
+                };
+                Task::perform(
+                    async move {
+                        let path = crate::sys::file_dialog()
+                            .set_title(crate::t!("Save Block As").as_ref())
+                            .set_file_name(&default_name)
+                            .add_filter(crate::t!("DWG Files").as_ref(), &["dwg"])
+                            .add_filter(crate::t!("DXF Files").as_ref(), &["dxf"])
+                            .save_file()
+                            .await
+                            .map(|h| crate::sys::handle_path(&h));
+                        path
+                    },
+                    |path| Message::WblockBrowsePathResult(path),
+                )
+            }
+            Message::WblockBrowsePathResult(opt_path) => {
+                if let Some(path) = opt_path {
+                    if let Some(state) = self.wblock.as_mut() {
+                        state.file_path = path.to_string_lossy().to_string();
+                    }
+                }
+                Task::none()
+            }
+            Message::WblockUnit(unit) => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.unit = unit;
+                }
+                Task::none()
+            }
+            Message::WblockDismissError => {
+                if let Some(state) = self.wblock.as_mut() {
+                    state.error_message = None;
+                }
+                Task::none()
+            }
+            Message::WblockHelp => {
+                self.command_line.push_info(
+                    crate::t!("WBLOCK writes objects, a block, or the entire drawing to a new drawing file.").as_ref(),
+                );
+                Task::none()
+            }
+            Message::WblockApply => {
+                let Some(state) = self.wblock.as_mut() else {
+                    return Task::none();
+                };
+                use crate::ui::window::wblock::{WblockObjectMode, WblockSourceMode};
+                match state.source_mode {
+                    WblockSourceMode::Block => {
+                        let name = state.block_name.trim();
+                        if name.is_empty() {
+                            state.error_message =
+                                Some(crate::t!("Please select or enter a block name.").into_owned());
+                            return Task::none();
+                        }
+                        let i = self.active_tab;
+                        if self.tabs[i].scene.document.block_records.get(name).is_none() {
+                            state.error_message = Some(
+                                crate::tf!("Block \"{}\" does not exist in drawing.", name)
+                                    .into_owned(),
+                            );
+                            return Task::none();
+                        }
+                    }
+                    WblockSourceMode::Objects => {
+                        if state.selected_handles.is_empty() {
+                            state.error_message = Some(
+                                crate::t!("No objects selected. You must select objects to define a block.")
+                                    .into_owned(),
+                            );
+                            return Task::none();
+                        }
+                    }
+                    WblockSourceMode::EntireDrawing => {}
+                }
+
+                let path_str = state.file_path.trim().to_string();
+                if path_str.is_empty() {
+                    state.error_message =
+                        Some(crate::t!("Please specify a file name and path.").into_owned());
+                    return Task::none();
+                }
+
+                let mut path = std::path::PathBuf::from(path_str);
+                if path.extension().is_none() {
+                    path.set_extension("dwg");
+                }
+
+                let i = self.active_tab;
+                if let Some(current_path) = self.tabs[i].current_path.as_ref() {
+                    if current_path == &path {
+                        state.error_message = Some(
+                            crate::t!("Cannot write to the current drawing file.").into_owned(),
+                        );
+                        return Task::none();
+                    }
+                }
+
+                let state = self.wblock.take().unwrap();
+                self.active_modal = None;
+                let document = self.tabs[i].scene.document_for_save();
+                let source_mode = state.source_mode;
+                let block_name = state.block_name.trim().to_string();
+                let handles = state.selected_handles.clone();
+                let base_point = state.parse_base_point();
+                let unit = state.unit;
+                let object_mode = state.object_mode;
+
+                if source_mode == WblockSourceMode::Objects {
+                    match object_mode {
+                        WblockObjectMode::Retain => {}
+                        WblockObjectMode::Delete => {
+                            self.push_undo_snapshot(i, "WBLOCK");
+                            self.tabs[i].scene.erase_entities(&handles);
+                            self.tabs[i].dirty = true;
+                            self.tabs[i].scene.bump_geometry();
+                            self.refresh_properties();
+                        }
+                        WblockObjectMode::Convert => {
+                            let block_name_for_conv = path
+                                .file_stem()
+                                .and_then(|s| s.to_str())
+                                .unwrap_or("WBLOCK")
+                                .to_string();
+                            self.push_undo_snapshot(i, "WBLOCK");
+                            let ucs = self.tabs[i].ucs_xform();
+                            let world_to_block = ucs.to_ucs_transform_at(base_point);
+                            let block_to_world = ucs.to_wcs_transform_at(base_point);
+                            let options = crate::scene::CreateBlockOptions {
+                                name: block_name_for_conv,
+                                handles: handles.clone(),
+                                base_point,
+                                world_to_block,
+                                block_to_world,
+                                mode: crate::ui::window::block_definition::BlockObjectMode::Convert,
+                                annotative: false,
+                                match_orientation: false,
+                                scale_uniformly: false,
+                                allow_exploding: true,
+                                unit,
+                                description: String::new(),
+                                hyperlink_url: String::new(),
+                                hyperlink_desc: String::new(),
+                                redefine: true,
+                            };
+                            let _ = self.tabs[i].scene.create_block_with_options(options);
+                            self.tabs[i].dirty = true;
+                            self.tabs[i].scene.bump_geometry();
+                            self.refresh_properties();
+                        }
+                    }
+                }
+
+                let worker_path = path.clone();
+                let display_name = match source_mode {
+                    WblockSourceMode::Block => block_name.clone(),
+                    WblockSourceMode::EntireDrawing => "*".to_string(),
+                    WblockSourceMode::Objects => "*".to_string(),
+                };
+                let worker_display = display_name.clone();
+
+                file::background_task(
+                    move || {
+                        let out_doc = match source_mode {
+                            WblockSourceMode::Block => {
+                                let mut d = crate::modules::insert::wblock::extract_block_to_doc(
+                                    &document,
+                                    &block_name,
+                                )
+                                .map_err(|e| e.to_string())?;
+                                d.header.insertion_units = unit;
+                                d
+                            }
+                            WblockSourceMode::EntireDrawing => {
+                                let mut d = document.clone();
+                                d.header.insertion_units = unit;
+                                d
+                            }
+                            WblockSourceMode::Objects => {
+                                crate::modules::insert::wblock::extract_entities_to_doc_with_base(
+                                    &document,
+                                    &handles,
+                                    base_point,
+                                    unit,
+                                )
+                                .map_err(|e| e.to_string())?
+                            }
+                        };
+                        crate::io::save(&out_doc, &worker_path).map_err(|e| e.to_string())
+                    },
+                    move |result| Message::WblockWriteFinished(worker_display, path, result),
+                )
+            }
            Message::ToleranceDialogField(field) => {
                if let Some(state) = self.geometric_tolerance.as_mut() {
                    state.apply_field(field);
@@ -5904,6 +6208,8 @@ impl OpenCADStudio {
                self.reset_modal_geometry();
                if self.block_definition.is_some() {
                    self.active_modal = Some(super::ModalKind::BlockDefinition);
+                } else if self.wblock.is_some() {
+                    self.active_modal = Some(super::ModalKind::WriteBlock);
                }
                Task::none()
            }
@@ -6110,6 +6416,15 @@ impl OpenCADStudio {
                        .collect();
                    block_def.error_message = None;
                    self.active_modal = Some(super::ModalKind::BlockDefinition);
+                } else if let Some(ref mut wblock) = self.wblock {
+                    wblock.selected_handles = self.tabs[i]
+                        .scene
+                        .selected_entities()
+                        .into_iter()
+                        .map(|(h, _)| h)
+                        .collect();
+                    wblock.error_message = None;
+                    self.active_modal = Some(super::ModalKind::WriteBlock);
                }
                Task::none()
            }
@@ -25,6 +25,7 @@ impl OpenCADStudio {
            Some(K::DrawingUnits) => crate::t!("Drawing Units").into_owned(),
            Some(K::BlockDefinition) => crate::t!("Block Definition").into_owned(),
            Some(K::XrefAttach) => crate::t!("Attach External Reference").into_owned(),
+            Some(K::WriteBlock) => crate::t!("Write Block").into_owned(),
            Some(K::GeometricTolerance) => crate::t!("Geometric Tolerance").into_owned(),
            Some(K::DraftingSettings) => crate::t!("Drafting Settings").into_owned(),
            Some(K::AutoConstrainSettings) => crate::t!("Constraint Settings").into_owned(),
@@ -514,6 +515,12 @@ impl OpenCADStudio {
                    crate::ui::window::xref_attach::view_window(state, flow)
                })
            }
+            super::super::ModalKind::WriteBlock => {
+                let state = self.wblock.as_ref()?;
+                sized_flow(ex, 440, 395, |flow| {
+                    crate::ui::window::wblock::view_window(state, flow)
+                })
+            }
            super::super::ModalKind::GeometricTolerance => {
                let state = self.geometric_tolerance.as_ref()?;
                sized_flow(ex, 670, 530, |flow| {
@@ -3,6 +3,17 @@

 pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static str)> {
    match source {
+        "Entire drawing" => Some(("common", "entire-drawing")),
+        "Delete from drawing" => Some(("common", "delete-from-drawing")),
+        "Destination" => Some(("common", "destination")),
+        "File name and path:" => Some(("common", "file-name-and-path")),
+        "Insert units:" => Some(("common", "insert-units-label")),
+        "Please select or enter a block name." => Some(("common", "wblock-err-no-block-name")),
+        "Block \"{}\" does not exist in drawing." => Some(("common", "wblock-err-block-not-found")),
+        "Please specify a file name and path." => Some(("common", "wblock-err-no-path")),
+        "Cannot write to the current drawing file." => Some(("common", "wblock-err-current-drawing")),
+        "WBLOCK writes objects, a block, or the entire drawing to a new drawing file." => Some(("common", "wblock-help-info")),
+        "WBLOCK  Specify insertion base point:" => Some(("insert", "wblock-specify-insertion-base-point")),
        "Auto Constrain" => Some(("common", "auto-constrain")),
        "Delete Constraints" => Some(("common", "delete-constraints")),
        "Dimensional" => Some(("common", "dimensional")),
@@ -157,3 +157,109 @@ pub fn normalize_to_origin(out: &mut CadDocument) {
        crate::scene::view::dispatch::apply_transform(entity, &shift);
    }
 }
+
+/// One-shot point picker for the Write Block dialog's "Pick point" button.
+pub struct WblockPickBasePointCommand;
+
+impl crate::command::CadCommand for WblockPickBasePointCommand {
+    fn name(&self) -> &'static str {
+        "WBLOCK"
+    }
+
+    fn prompt(&self) -> String {
+        crate::t!("WBLOCK  Specify insertion base point:").into_owned()
+    }
+
+    fn on_point(&mut self, pt: glam::DVec3) -> crate::command::CmdResult {
+        crate::command::CmdResult::Dispatch(format!("WBLOCK_POINT_PICKED {} {} {}", pt.x, pt.y, pt.z))
+    }
+
+    fn on_enter(&mut self) -> crate::command::CmdResult {
+        crate::command::CmdResult::Dispatch("WBLOCK_POINT_CANCELLED".to_string())
+    }
+
+    fn on_escape(&mut self) -> crate::command::CmdResult {
+        crate::command::CmdResult::Dispatch("WBLOCK_POINT_CANCELLED".to_string())
+    }
+}
+
+/// Build a standalone `CadDocument` from an explicit list of entity handles,
+/// applying `base_point` translation and `unit` insertion units.
+pub fn extract_entities_to_doc_with_base(
+    src: &CadDocument,
+    handles: &[acadrust::Handle],
+    base_point: glam::DVec3,
+    unit: i16,
+) -> Result<CadDocument, String> {
+    let mut out = CadDocument::new();
+    out.header.insertion_units = unit;
+    extract_entities_into(src, handles, &mut out)?;
+    if base_point != glam::DVec3::ZERO {
+        let shift = crate::command::EntityTransform::Affine(
+            acadrust::types::Transform::from_translation(acadrust::types::Vector3::new(
+                -base_point.x,
+                -base_point.y,
+                -base_point.z,
+            )),
+        );
+        for entity in out.entities_mut() {
+            crate::scene::view::dispatch::apply_transform(entity, &shift);
+        }
+    }
+    Ok(out)
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use acadrust::entities::Line;
+    use acadrust::types::Vector3;
+
+    #[test]
+    fn test_extract_entities_with_base_point_and_units() {
+        let mut doc = CadDocument::new();
+        let mut line = Line::new();
+        line.start = Vector3::new(10.0, 20.0, 0.0);
+        line.end = Vector3::new(30.0, 40.0, 0.0);
+        let h = doc.add_entity(EntityType::Line(line)).unwrap();
+
+        let out = extract_entities_to_doc_with_base(
+            &doc,
+            &[h],
+            glam::DVec3::new(10.0, 20.0, 0.0),
+            4, // Millimeters
+        )
+        .expect("extract should succeed");
+
+        assert_eq!(out.header.insertion_units, 4);
+        assert_eq!(out.entities().count(), 1);
+        let e = out.entities().next().unwrap();
+        if let EntityType::Line(l) = e {
+            assert!((l.start.x - 0.0).abs() < 1e-6);
+            assert!((l.start.y - 0.0).abs() < 1e-6);
+            assert!((l.end.x - 20.0).abs() < 1e-6);
+            assert!((l.end.y - 20.0).abs() < 1e-6);
+        } else {
+            panic!("Expected Line entity");
+        }
+    }
+
+    #[test]
+    fn test_extract_block_to_doc() {
+        let mut doc = CadDocument::new();
+        let mut line = Line::new();
+        line.start = Vector3::new(1.0, 2.0, 0.0);
+        line.end = Vector3::new(3.0, 4.0, 0.0);
+        let h = doc.add_entity(EntityType::Line(line)).unwrap();
+
+        let mut block_record = acadrust::tables::BlockRecord::new("MY_BLOCK".to_string());
+        block_record.entity_handles.push(h);
+        let _ = doc.block_records.add(block_record);
+
+        let out = extract_block_to_doc(&doc, "MY_BLOCK").expect("block extract should succeed");
+        assert_eq!(out.entities().count(), 1);
+
+        assert!(extract_block_to_doc(&doc, "NON_EXISTENT").is_err());
+    }
+}
+
@@ -7,10 +7,44 @@

 use crate::app::Message;
 use crate::ui::style::common::muted_style;
-use iced::widget::{button, container, pick_list, row, text, text_input, Space};
+use iced::widget::{button, container, pick_list, radio, row, text, text_input, Space};
 use iced::{Background, Border, Element, Length, Theme};
 use std::borrow::Cow;

+/// Standard dialog footer action button (OK, Cancel, Apply, Close, Help, etc.),
+/// matching the Drafting Settings / Options appearance: 12px text, [6, 18] padding,
+/// themed primary or secondary style.
+pub fn dialog_button<'a>(
+    label: impl text::IntoFragment<'a>,
+    on_press: Message,
+    primary: bool,
+) -> button::Button<'a, Message> {
+    button(text(label).size(12))
+        .on_press(on_press)
+        .padding([6, 18])
+        .style(if primary {
+            button::primary
+        } else {
+            button::secondary
+        })
+}
+
+/// Unified radio button helper ensuring consistent 16px size for exact pixel-grid concentric alignment.
+pub fn form_radio<'a, T>(
+    label: impl Into<String>,
+    value: T,
+    selected: Option<T>,
+    on_click: impl Fn(T) -> Message + 'a,
+) -> radio::Radio<'a, Message>
+where
+    T: Copy + Eq + 'a,
+{
+    radio(label, value, selected, on_click)
+        .size(16)
+        .spacing(6)
+        .text_size(11)
+}
+
 /// Width of the label column in a `label : control` row.
 pub const LABEL_WIDTH: f32 = 92.0;

@@ -168,7 +168,7 @@ pub fn view_window<'a>(
            Some(relative),
            Message::PointStyleSizeRelative,
        )
-        .size(15)
+        .size(16)
        .text_size(13),
        radio(
            t!("Set Size in Absolute Units"),
@@ -176,7 +176,7 @@ pub fn view_window<'a>(
            Some(relative),
            Message::PointStyleSizeRelative,
        )
-        .size(15)
+        .size(16)
        .text_size(13),
    ]
    .spacing(6);
@@ -5,7 +5,7 @@ use std::fmt;

 use acadrust::Handle;
 use iced::widget::{
-    button, checkbox, column, combo_box, container, mouse_area, pick_list, radio, row, stack, text,
+    button, checkbox, column, combo_box, container, mouse_area, pick_list, row, stack, text,
    text_editor, text_input, Space,
 };
 use iced::{Background, Border, Element, Fill, Length, Theme};
@@ -14,7 +14,7 @@ use crate::app::Message;
 use crate::modules::draw::units;
 use crate::t;
 use crate::ui::style::common::muted_style;
-use crate::ui::style::form::{button_style, field_style};
+use crate::ui::style::form::{button_style, dialog_button, field_style, form_radio};

 static ICON_PICK_POINT: &[u8] = include_bytes!("../../../assets/icons/blocks/pick_point.svg");
 static ICON_SELECT_OBJECTS: &[u8] =
@@ -353,33 +353,24 @@ pub fn view_window<'a>(
    let btns_row = row![sel_obj_btn, qsel_btn].spacing(5).align_y(iced::Center);

    let radios = column![
-        radio(
+        form_radio(
            t!("Retain"),
            BlockObjectMode::Retain,
            Some(state.object_mode),
            Message::BlockDefObjectMode,
-        )
-        .size(15)
-        .spacing(5)
-        .text_size(11),
-        radio(
+        ),
+        form_radio(
            t!("Convert to block"),
            BlockObjectMode::Convert,
            Some(state.object_mode),
            Message::BlockDefObjectMode,
-        )
-        .size(15)
-        .spacing(5)
-        .text_size(11),
-        radio(
+        ),
+        form_radio(
            t!("Delete"),
            BlockObjectMode::Delete,
            Some(state.object_mode),
            Message::BlockDefObjectMode,
-        )
-        .size(15)
-        .spacing(5)
-        .text_size(11),
+        ),
    ]
    .spacing(2);

@@ -580,20 +571,11 @@ pub fn view_window<'a>(
    // ── Footer Bar ────────────────────────────────────────────────────────────
    let actions = row![
        Space::new().width(Fill),
-        button(text(t!("OK")).size(11))
-            .on_press(Message::BlockDefApply)
-            .style(button_style(true))
-            .padding([4, 16]),
-        button(text(t!("Cancel")).size(11))
-            .on_press(Message::CloseModal)
-            .style(button_style(false))
-            .padding([4, 12]),
-        button(text(t!("Help")).size(11))
-            .on_press(Message::BlockDefHelp)
-            .style(button_style(false))
-            .padding([4, 12]),
+        dialog_button(t!("OK"), Message::BlockDefApply, true),
+        dialog_button(t!("Cancel"), Message::CloseModal, false),
+        dialog_button(t!("Help"), Message::BlockDefHelp, false),
    ]
-    .spacing(6)
+    .spacing(8)
    .align_y(iced::Center);

    // ── Error Banner ──────────────────────────────────────────────────────────
@@ -664,15 +646,9 @@ pub fn view_window<'a>(
                    .align_x(iced::alignment::Horizontal::Center),
                Space::new().height(16),
                row![
-                    button(text(t!("Yes")).size(12))
-                        .on_press(Message::BlockDefConfirmRedefine(true))
-                        .padding([6, 20])
-                        .style(button_style(false)),
+                    dialog_button(t!("Yes"), Message::BlockDefConfirmRedefine(true), false),
                    // Default / safe focus on "No"
-                    button(text(t!("No")).size(12))
-                        .on_press(Message::BlockDefConfirmRedefine(false))
-                        .padding([6, 22])
-                        .style(button_style(true)),
+                    dialog_button(t!("No"), Message::BlockDefConfirmRedefine(false), true),
                ]
                .spacing(12)
                .align_y(iced::Center),
@@ -27,3 +27,4 @@ pub mod named_parameters;
 pub mod xref_attach;
 pub mod xref_help;
 pub mod xref_manager;
+pub mod wblock;
@@ -0,0 +1,492 @@
+//! Write Block (WBLOCK) dialog window — write a block, selected entities, or entire drawing to an external DWG/DXF file.
+
+use std::fmt;
+
+use acadrust::Handle;
+use iced::widget::{
+    button, column, combo_box, container, pick_list, row, text, text_input, Space,
+};
+use iced::{Background, Border, Element, Fill, Length, Theme};
+
+use crate::app::Message;
+use crate::modules::draw::units;
+use crate::t;
+use crate::ui::style::form::{button_style, dialog_button, field_style, form_radio};
+
+static ICON_PICK_POINT: &[u8] = include_bytes!("../../../assets/icons/blocks/pick_point.svg");
+static ICON_SELECT_OBJECTS: &[u8] =
+    include_bytes!("../../../assets/icons/blocks/select_objects.svg");
+static ICON_QUICK_SELECT: &[u8] = include_bytes!("../../../assets/icons/blocks/quick_select.svg");
+static ICON_WARN: &[u8] = include_bytes!("../../../assets/icons/ui/warning_triangle.svg");
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+pub enum WblockSourceMode {
+    Block,
+    EntireDrawing,
+    Objects,
+}
+
+impl Default for WblockSourceMode {
+    fn default() -> Self {
+        WblockSourceMode::Objects
+    }
+}
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+pub enum WblockObjectMode {
+    Retain,
+    Convert,
+    Delete,
+}
+
+impl Default for WblockObjectMode {
+    fn default() -> Self {
+        WblockObjectMode::Retain
+    }
+}
+
+/// Dropdown entry for the Unit picker.
+#[derive(Clone, PartialEq, Eq)]
+pub struct UnitChoice {
+    pub code: i16,
+    pub label: &'static str,
+}
+
+impl fmt::Display for UnitChoice {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+        let name = crate::i18n::translate(self.label);
+        f.write_str(name.as_ref())
+    }
+}
+
+/// The Write Block dialog's state.
+pub struct WblockState {
+    pub source_mode: WblockSourceMode,
+    pub block_name: String,
+    pub existing_blocks: Vec<String>,
+    pub block_combo: combo_box::State<String>,
+
+    pub base_point_x: String,
+    pub base_point_y: String,
+    pub base_point_z: String,
+
+    pub selected_handles: Vec<Handle>,
+    pub object_mode: WblockObjectMode,
+
+    pub file_path: String,
+    pub unit: i16,
+
+    pub error_message: Option<String>,
+}
+
+impl Clone for WblockState {
+    fn clone(&self) -> Self {
+        Self {
+            source_mode: self.source_mode,
+            block_name: self.block_name.clone(),
+            existing_blocks: self.existing_blocks.clone(),
+            block_combo: self.block_combo.clone(),
+            base_point_x: self.base_point_x.clone(),
+            base_point_y: self.base_point_y.clone(),
+            base_point_z: self.base_point_z.clone(),
+            selected_handles: self.selected_handles.clone(),
+            object_mode: self.object_mode,
+            file_path: self.file_path.clone(),
+            unit: self.unit,
+            error_message: self.error_message.clone(),
+        }
+    }
+}
+
+impl WblockState {
+    pub fn new(
+        existing_blocks: Vec<String>,
+        pre_selected: Vec<Handle>,
+        default_unit: i16,
+        default_path: String,
+    ) -> Self {
+        let default_block = existing_blocks.first().cloned().unwrap_or_default();
+        Self {
+            source_mode: WblockSourceMode::Objects,
+            block_name: default_block,
+            block_combo: combo_box::State::new(existing_blocks.clone()),
+            existing_blocks,
+            base_point_x: "0.00".to_string(),
+            base_point_y: "0.00".to_string(),
+            base_point_z: "0.00".to_string(),
+            selected_handles: pre_selected,
+            object_mode: WblockObjectMode::Retain,
+            file_path: default_path,
+            unit: default_unit,
+            error_message: None,
+        }
+    }
+
+    pub fn parse_base_point(&self) -> glam::DVec3 {
+        let x = self.base_point_x.trim().parse::<f64>().unwrap_or(0.0);
+        let y = self.base_point_y.trim().parse::<f64>().unwrap_or(0.0);
+        let z = self.base_point_z.trim().parse::<f64>().unwrap_or(0.0);
+        glam::DVec3::new(x, y, z)
+    }
+}
+
+fn group<'a>(
+    title: impl Into<String>,
+    body: impl Into<Element<'a, Message>>,
+    height: impl Into<Length>,
+) -> Element<'a, Message> {
+    container(
+        column![
+            text(title.into())
+                .size(11)
+                .style(|theme: &Theme| text::Style {
+                    color: Some(theme.palette().background.strongest.text.scale_alpha(0.85)),
+                }),
+            body.into(),
+        ]
+        .spacing(4),
+    )
+    .padding([5, 8])
+    .width(Fill)
+    .height(height)
+    .style(|theme: &Theme| container::Style {
+        border: Border {
+            width: 1.0,
+            radius: 4.0.into(),
+            color: theme.palette().background.strong.color,
+        },
+        ..Default::default()
+    })
+    .into()
+}
+
+pub fn view_window<'a>(
+    state: &'a WblockState,
+    sizing: crate::ui::modal::ModalSizing,
+) -> Element<'a, Message> {
+    let is_objects = state.source_mode == WblockSourceMode::Objects;
+    let is_block = state.source_mode == WblockSourceMode::Block;
+
+    // ── Source: Block Radio & Dropdown ─────────────────────────────────────────
+    let block_radio = form_radio(
+        t!("Block:"),
+        WblockSourceMode::Block,
+        Some(state.source_mode),
+        Message::WblockSourceMode,
+    );
+
+    let block_dropdown: Element<'a, Message> = if is_block {
+        combo_box(
+            &state.block_combo,
+            "",
+            if state.block_name.is_empty() {
+                None
+            } else {
+                Some(&state.block_name)
+            },
+            |chosen: String| Message::WblockBlockSelect(chosen),
+        )
+        .on_input(Message::WblockBlockName)
+        .size(11)
+        .padding([2, 5])
+        .width(Fill)
+        .into()
+    } else {
+        crate::ui::read_only::field(&state.block_name, 11.0, Fill)
+    };
+
+    let block_row = row![block_radio, block_dropdown]
+        .spacing(8)
+        .width(Fill)
+        .align_y(iced::Center);
+
+    let entire_drawing_radio = form_radio(
+        t!("Entire drawing"),
+        WblockSourceMode::EntireDrawing,
+        Some(state.source_mode),
+        Message::WblockSourceMode,
+    );
+
+    let objects_radio = form_radio(
+        t!("Objects"),
+        WblockSourceMode::Objects,
+        Some(state.source_mode),
+        Message::WblockSourceMode,
+    );
+
+    // ── Source: Base Point Sub-group ──────────────────────────────────────────
+    let pick_pt_icon = crate::ui::icons::semantic(ICON_PICK_POINT, 14.0);
+    let mut pick_pt_btn = button(
+        row![pick_pt_icon, text(t!("Pick point")).size(11)]
+            .spacing(6)
+            .align_y(iced::Center),
+    )
+    .padding([3, 10]);
+
+    if is_objects {
+        pick_pt_btn = pick_pt_btn
+            .on_press(Message::WblockPickPoint)
+            .style(button_style(false));
+    } else {
+        pick_pt_btn = pick_pt_btn.style(button_style(false));
+    }
+
+    let coord_row = |axis: &'static str, val: &'a str, on_input: fn(String) -> Message| {
+        let input: Element<'a, Message> = if is_objects {
+            text_input("", val)
+                .on_input(on_input)
+                .on_submit(Message::WblockApply)
+                .style(field_style)
+                .size(11)
+                .padding([2, 5])
+                .width(Fill)
+                .into()
+        } else {
+            crate::ui::read_only::field(val, 11.0, Fill)
+        };
+        row![
+            text(axis)
+                .size(11)
+                .style(|theme: &Theme| text::Style {
+                    color: Some(theme.palette().background.strongest.text.scale_alpha(0.85)),
+                })
+                .width(Length::Fixed(16.0)),
+            input,
+        ]
+        .spacing(4)
+        .align_y(iced::Center)
+    };
+
+    let base_point_group = group(
+        t!("Base point").into_owned(),
+        column![
+            pick_pt_btn,
+            Space::new().height(3),
+            coord_row("X:", &state.base_point_x, Message::WblockBaseX),
+            coord_row("Y:", &state.base_point_y, Message::WblockBaseY),
+            coord_row("Z:", &state.base_point_z, Message::WblockBaseZ),
+        ]
+        .spacing(3),
+        Length::Fixed(142.0),
+    );
+
+    // ── Source: Objects Sub-group ─────────────────────────────────────────────
+    let sel_obj_icon = crate::ui::icons::semantic(ICON_SELECT_OBJECTS, 14.0);
+    let mut sel_obj_btn = button(
+        row![sel_obj_icon, text(t!("Select objects")).size(11)]
+            .spacing(6)
+            .align_y(iced::Center),
+    )
+    .padding([3, 8]);
+
+    let qsel_icon = crate::ui::icons::semantic(ICON_QUICK_SELECT, 14.0);
+    let mut qsel_btn = button(qsel_icon).padding([3, 6]);
+
+    if is_objects {
+        sel_obj_btn = sel_obj_btn
+            .on_press(Message::WblockSelectObjects)
+            .style(button_style(false));
+        qsel_btn = qsel_btn
+            .on_press(Message::WblockQuickSelect)
+            .style(button_style(false));
+    } else {
+        sel_obj_btn = sel_obj_btn.style(button_style(false));
+        qsel_btn = qsel_btn.style(button_style(false));
+    }
+
+    let obj_btns_row = row![sel_obj_btn, qsel_btn]
+        .spacing(5)
+        .align_y(iced::Center);
+
+    let object_radios = column![
+        form_radio(
+            t!("Retain"),
+            WblockObjectMode::Retain,
+            if is_objects { Some(state.object_mode) } else { None },
+            Message::WblockObjectMode,
+        ),
+        form_radio(
+            t!("Convert to block"),
+            WblockObjectMode::Convert,
+            if is_objects { Some(state.object_mode) } else { None },
+            Message::WblockObjectMode,
+        ),
+        form_radio(
+            t!("Delete from drawing"),
+            WblockObjectMode::Delete,
+            if is_objects { Some(state.object_mode) } else { None },
+            Message::WblockObjectMode,
+        ),
+    ]
+    .spacing(3);
+
+    let count = state.selected_handles.len();
+    let status_row: Element<'a, Message> = if !is_objects {
+        Space::new().height(14).into()
+    } else if count == 0 {
+        row![
+            crate::ui::icons::semantic(ICON_WARN, 13.0),
+            text(t!("No objects selected"))
+                .size(10)
+                .style(|theme: &Theme| text::Style {
+                    color: Some(theme.palette().warning.base.color),
+                }),
+        ]
+        .spacing(5)
+        .align_y(iced::Center)
+        .into()
+    } else {
+        row![text(crate::tf!("{count} objects selected"))
+            .size(10)
+            .style(|theme: &Theme| text::Style {
+                color: Some(theme.palette().primary.base.color),
+            }),]
+        .spacing(5)
+        .align_y(iced::Center)
+        .into()
+    };
+
+    let objects_subgroup = group(
+        t!("Objects").into_owned(),
+        column![obj_btns_row, Space::new().height(2), object_radios, Space::new().height(2), status_row,]
+            .spacing(2),
+        Length::Fixed(142.0),
+    );
+
+    let sub_panels = row![base_point_group, objects_subgroup]
+        .spacing(8)
+        .width(Fill);
+
+    let source_group = group(
+        t!("Source").into_owned(),
+        column![
+            block_row,
+            entire_drawing_radio,
+            objects_radio,
+            Space::new().height(4),
+            sub_panels,
+        ]
+        .spacing(4),
+        Length::Shrink,
+    );
+
+    // ── Destination Group ─────────────────────────────────────────────────────
+    let file_input = text_input("", &state.file_path)
+        .on_input(Message::WblockFilePath)
+        .on_submit(Message::WblockApply)
+        .style(field_style)
+        .size(11)
+        .padding([3, 6])
+        .width(Fill);
+
+    let browse_btn = button(
+        container(text("...").size(11))
+            .width(Fill)
+            .align_x(iced::alignment::Horizontal::Center),
+    )
+    .width(Length::Fixed(28.0))
+    .on_press(Message::WblockBrowsePath)
+    .style(button::secondary)
+    .padding([3, 0]);
+
+    let path_row = row![file_input, browse_btn].spacing(5).align_y(iced::Center);
+
+    let unit_options: Vec<UnitChoice> = units::all()
+        .map(|(code, label)| UnitChoice { code, label })
+        .collect();
+
+    let selected_unit = unit_options
+        .iter()
+        .find(|choice| choice.code == state.unit)
+        .cloned();
+
+    let unit_picker = pick_list(selected_unit, unit_options, |choice| choice.to_string())
+        .on_select(|choice| Message::WblockUnit(choice.code))
+        .text_size(11)
+        .padding([2, 5])
+        .width(Fill);
+
+    let units_row = row![
+        text(t!("Insert units:"))
+            .size(11)
+            .style(|theme: &Theme| text::Style {
+                color: Some(theme.palette().background.strongest.text.scale_alpha(0.85)),
+            }),
+        Space::new().width(8),
+        unit_picker,
+        Space::new().width(Length::Fixed(33.0)),
+    ]
+    .spacing(4)
+    .align_y(iced::Center);
+
+    let destination_group = group(
+        t!("Destination").into_owned(),
+        column![
+            text(t!("File name and path:"))
+                .size(11)
+                .style(|theme: &Theme| text::Style {
+                    color: Some(theme.palette().background.strongest.text.scale_alpha(0.85)),
+                }),
+            path_row,
+            Space::new().height(4),
+            units_row,
+        ]
+        .spacing(3),
+        Length::Shrink,
+    );
+
+    // ── Footer Bar ────────────────────────────────────────────────────────────
+    let actions = row![
+        Space::new().width(Fill),
+        dialog_button(t!("OK"), Message::WblockApply, true),
+        dialog_button(t!("Cancel"), Message::CloseModal, false),
+        dialog_button(t!("Help"), Message::WblockHelp, false),
+    ]
+    .spacing(8)
+    .align_y(iced::Center);
+
+    // ── Error Banner ──────────────────────────────────────────────────────────
+    let mut main_column = column![source_group, destination_group, actions,]
+        .spacing(8)
+        .padding([8, 10])
+        .width(sizing.width);
+
+    if let Some(err) = &state.error_message {
+        let err_banner = container(
+            row![
+                crate::ui::icons::semantic(ICON_WARN, 16.0),
+                text(err.clone())
+                    .size(11)
+                    .style(|theme: &Theme| text::Style {
+                        color: Some(theme.palette().background.strongest.text),
+                    }),
+                Space::new().width(Fill),
+                button(text("×").size(12))
+                    .on_press(Message::WblockDismissError)
+                    .style(button_style(false))
+                    .padding([1, 6]),
+            ]
+            .spacing(8)
+            .align_y(iced::Center),
+        )
+        .padding([6, 10])
+        .style(|theme: &Theme| container::Style {
+            background: Some(Background::Color(
+                theme.palette().danger.base.color.scale_alpha(0.18),
+            )),
+            border: Border {
+                width: 1.0,
+                radius: 4.0.into(),
+                color: theme.palette().danger.base.color,
+            },
+            ..Default::default()
+        });
+
+        main_column = column![err_banner, main_column]
+            .spacing(6)
+            .width(sizing.width)
+            .padding(10);
+    }
+
+    main_column.into()
+}