Selection: report what each pick found while a command gathers objects

Every pick during object selection prints the reference's count line:
"N found" for the first pick or a pick that adds nothing, "N found,
M total" after it, "N found, N removed, M total" when objects leave the
set. It is printed before a command's own filtering, so "N were filtered
out" follows it. COUNT reports through it and the ad hoc
"object(s) found." / "object(s) added to selection." lines are gone.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

locales/ar-SA/opencadstudio.ftl

@@ -6553,3 +6553,6 @@ keytips =
     .hint-tabs = اكتب حرف علامة التبويب · Esc للإغلاق
     .hint-tab = علامة التبويب { $tab } · Esc للرجوع مستوى واحدًا
     .hint-items = اكتب حرف العنصر · Esc للرجوع مستوى واحدًا
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/bg-BG/opencadstudio.ftl

@@ -6541,3 +6541,6 @@ keytips =
     .hint-tabs = Въведете буква на раздел · Esc затваря
     .hint-tab = Раздел { $tab } · Esc връща едно ниво назад
     .hint-items = Въведете буква на елемент · Esc връща едно ниво назад
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/cs-CZ/opencadstudio.ftl

@@ -6538,3 +6538,6 @@ keytips =
     .hint-tabs = Zadejte písmeno karty · Esc zavře
     .hint-tab = Karta { $tab } · Esc o úroveň zpět
     .hint-items = Zadejte písmeno položky · Esc o úroveň zpět
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/de-DE/opencadstudio.ftl

@@ -6539,3 +6539,6 @@ keytips =
     .hint-tabs = Buchstaben einer Registerkarte eingeben · Esc schließt
     .hint-tab = Registerkarte { $tab } · Esc geht eine Ebene zurück
     .hint-items = Buchstaben eines Elements eingeben · Esc geht eine Ebene zurück
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/el-GR/opencadstudio.ftl

@@ -6541,3 +6541,6 @@ keytips =
     .hint-tabs = Πληκτρολογήστε γράμμα καρτέλας · Το Esc κλείνει
     .hint-tab = Καρτέλα { $tab } · Το Esc επιστρέφει ένα επίπεδο
     .hint-items = Πληκτρολογήστε γράμμα στοιχείου · Το Esc επιστρέφει ένα επίπεδο
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/en-US/opencadstudio.ftl

@@ -6540,3 +6540,6 @@ keytips =
     .hint-tabs = Type a tab letter · Esc closes
     .hint-tab = { $tab } tab · Esc goes back one level
     .hint-items = Type an item letter · Esc goes back one level
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/es-ES/opencadstudio.ftl

@@ -6541,3 +6541,6 @@ keytips =
     .hint-tabs = Escriba la letra de una ficha · Esc cierra
     .hint-tab = Ficha { $tab } · Esc retrocede un nivel
     .hint-items = Escriba la letra de un elemento · Esc retrocede un nivel
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/fi-FI/opencadstudio.ftl

@@ -6538,3 +6538,6 @@ keytips =
     .hint-tabs = Kirjoita välilehden kirjain · Esc sulkee
     .hint-tab = Välilehti { $tab } · Esc palaa tason taaksepäin
     .hint-items = Kirjoita kohteen kirjain · Esc palaa tason taaksepäin
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/fr-FR/opencadstudio.ftl

@@ -6541,3 +6541,6 @@ keytips =
     .hint-tabs = Tapez la lettre d'un onglet · Échap ferme
     .hint-tab = Onglet { $tab } · Échap remonte d'un niveau
     .hint-items = Tapez la lettre d'un élément · Échap remonte d'un niveau
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/hi-IN/opencadstudio.ftl

@@ -6529,3 +6529,6 @@ keytips =
     .hint-tabs = टैब का अक्षर टाइप करें · Esc बंद करता है
     .hint-tab = { $tab } टैब · Esc एक स्तर पीछे जाता है
     .hint-items = आइटम का अक्षर टाइप करें · Esc एक स्तर पीछे जाता है
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/hu-HU/opencadstudio.ftl

@@ -6525,3 +6525,6 @@ keytips =
     .hint-tabs = Írja be a lap betűjét · Az Esc bezár
     .hint-tab = { $tab } lap · Az Esc egy szinttel visszalép
     .hint-items = Írja be az elem betűjét · Az Esc egy szinttel visszalép
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/it-IT/opencadstudio.ftl

@@ -6540,3 +6540,6 @@ keytips =
     .hint-tabs = Digitare la lettera di una scheda · Esc chiude
     .hint-tab = Scheda { $tab } · Esc torna indietro di un livello
     .hint-items = Digitare la lettera di un elemento · Esc torna indietro di un livello
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/ja-JP/opencadstudio.ftl

@@ -6529,3 +6529,6 @@ keytips =
     .hint-tabs = タブの文字を入力 · Esc で閉じる
     .hint-tab = { $tab } タブ · Esc で 1 つ上に戻る
     .hint-items = 項目の文字を入力 · Esc で 1 つ上に戻る
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/ko-KR/opencadstudio.ftl

@@ -6540,3 +6540,6 @@ keytips =
     .hint-tabs = 탭 문자를 입력하십시오 · Esc로 닫기
     .hint-tab = { $tab } 탭 · Esc로 한 단계 뒤로
     .hint-items = 항목 문자를 입력하십시오 · Esc로 한 단계 뒤로
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/lo-LA/opencadstudio.ftl

@@ -6541,3 +6541,6 @@ keytips =
     .hint-tabs = ພິມຕົວອັກສອນແຖບ · Esc ປິດ
     .hint-tab = ແຖບ { $tab } · Esc ກັບຄືນໜຶ່ງລະດັບ
     .hint-items = ພິມຕົວອັກສອນລາຍການ · Esc ກັບຄືນໜຶ່ງລະດັບ
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/nl-NL/opencadstudio.ftl

@@ -6539,3 +6539,6 @@ keytips =
     .hint-tabs = Typ de letter van een tabblad · Esc sluit
     .hint-tab = Tabblad { $tab } · Esc gaat één niveau terug
     .hint-items = Typ de letter van een item · Esc gaat één niveau terug
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/pl-PL/opencadstudio.ftl

@@ -6540,3 +6540,6 @@ keytips =
     .hint-tabs = Wpisz literę karty · Esc zamyka
     .hint-tab = Karta { $tab } · Esc cofa o jeden poziom
     .hint-items = Wpisz literę elementu · Esc cofa o jeden poziom
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/pt-BR/opencadstudio.ftl

@@ -6541,3 +6541,6 @@ keytips =
     .hint-tabs = Digite a letra de uma guia · Esc fecha
     .hint-tab = Guia { $tab } · Esc volta um nível
     .hint-items = Digite a letra de um item · Esc volta um nível
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/ru-RU/opencadstudio.ftl

@@ -6542,3 +6542,6 @@ keytips =
     .hint-tabs = Введите букву вкладки · Esc закрывает
     .hint-tab = Вкладка { $tab } · Esc — на уровень назад
     .hint-items = Введите букву элемента · Esc — на уровень назад
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/tr-TR/opencadstudio.ftl

@@ -6462,3 +6462,6 @@ keytips =
     .hint-tabs = Sekme harfini yazın · Esc kapatır
     .hint-tab = { $tab } sekmesi · Esc bir düzey geri
     .hint-items = Öğe harfini yazın · Esc bir düzey geri
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ bulundu, __ocs_fmt_1__ çıkarıldı, toplam __ocs_fmt_2__

locales/zh-CN/opencadstudio.ftl

@@ -6524,3 +6524,6 @@ keytips =
     .hint-tabs = 键入选项卡字母 · Esc 关闭
     .hint-tab = { $tab } 选项卡 · Esc 返回上一级
     .hint-items = 键入项目字母 · Esc 返回上一级
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

locales/zh-TW/opencadstudio.ftl

@@ -6536,3 +6536,6 @@ keytips =
     .hint-tabs = 輸入索引標籤字母 · Esc 關閉
     .hint-tab = { $tab } 索引標籤 · Esc 返回上一層
     .hint-items = 輸入項目字母 · Esc 返回上一層
+
+selection-report =
+    .found-removed-total = __ocs_fmt_0__ found, __ocs_fmt_1__ removed, __ocs_fmt_2__ total

src/app/command_driver/mod.rs

@@ -1261,9 +1261,6 @@ impl OpenCADStudio {
             .into_iter()
             .map(|(h, _)| h)
             .collect();
-        let count = handles.len();
-        self.command_line
-            .push_info(crate::tf!("{count} object(s) found.").as_ref());
         self.feed_command(StepInput::SelectionComplete(selected))
     }
 

src/app/command_driver/utilities.rs

@@ -574,6 +574,40 @@ impl OpenCADStudio {
         StepInput::SelectionComplete(kept)
     }
 
+/// What one pick added to (or removed from) a gathering selection, as the
+    /// reference words it: `N found`, `N found, M total`, `N found, N removed,
+    /// M total`. Returns the command's key while it gathers.
+    // ponytail: compares the whole selection before and after, so a pick of an
+    // already chosen object reads `0 found` (the reference says `1 found (1
+    // duplicate)`); pass the pick's own objects through StepInput if needed.
+    fn report_selection_found(&mut self, input: &StepInput) -> Option<usize> {
+        let StepInput::SelectionComplete(handles) = input else {
+            return None;
+        };
+        let command = self.tabs[self.active_tab].active_cmd.as_ref()?;
+        if !command.is_selection_gathering() {
+            return None;
+        }
+        let key = &**command as *const dyn crate::command::CadCommand as *const () as usize;
+        let previous: rustc_hash::FxHashSet<Handle> = match &self.selection_report {
+            Some((k, previous)) if *k == key => previous.iter().copied().collect(),
+            _ => Default::default(),
+        };
+        let now: rustc_hash::FxHashSet<Handle> = handles.iter().copied().collect();
+        let found = now.difference(&previous).count();
+        let removed = previous.difference(&now).count();
+        let total = now.len();
+        let line = if removed > 0 {
+            crate::tf!("{removed} found, {removed} removed, {total} total")
+        } else if found == 0 || previous.is_empty() {
+            crate::tf!("{found} found")
+        } else {
+            crate::tf!("{found} found, {total} total")
+        };
+        self.command_line.push_info(line.as_ref());
+        Some(key)
+    }
+
     /// `feed_command`, also reporting whether the step actually took the input.
     /// Only a `Text` token can come back unclaimed (`on_text_input` returning
     /// `None`), which is what lets the caller read it as something else — a
@@ -582,6 +616,7 @@ impl OpenCADStudio {
         &mut self,
         input: StepInput,
     ) -> (Task<Message>, bool) {
+        let gathering = self.report_selection_found(&input);
         // A command that takes associative dimensions only keeps just those:
         // the rest leave the selection and the count of what went is reported,
         // as the reference does while gathering.
@@ -589,6 +624,9 @@ impl OpenCADStudio {
         let input = self.filter_block_reference_selection(input);
         let input = self.filter_locked_point_cloud_selection(input);
         let input = self.filter_command_entity_selection(input);
+        if let (Some(key), StepInput::SelectionComplete(kept)) = (gathering, &input) {
+            self.selection_report = Some((key, kept.clone()));
+        }
         // XCLIP / CLIP learn which chosen references carry a clip already.
         {
             let i = self.active_tab;
@@ -1045,12 +1083,9 @@ impl OpenCADStudio {
             );
             return Some(Task::none());
         }
-        let count = add.len();
         for h in add {
             self.tabs[i].scene.select_entity(h, false);
         }
-        self.command_line
-            .push_info(crate::tf!("{count} object(s) added to selection.").as_ref());
         self.refresh_properties();
         let handles: Vec<Handle> = self.tabs[i]
             .scene

src/app/mod.rs

@@ -796,6 +796,9 @@ pub(super) struct OpenCADStudio {
     block_freq: std::collections::HashMap<String, u32>,
     /// BLOCKMRULIST: how many recent blocks the palette keeps (0–100).
     pub(crate) block_mru_list: u8,
+    /// The selection the gathering command had after the last pick (keyed by
+    /// the command), for the `N found, M total` line.
+    pub(crate) selection_report: Option<(usize, Vec<codec::Handle>)>,
     /// The Edit Reference dialog's remembered settings.
     pub(crate) refedit_options: crate::app::settings::RefEditOptions,
     /// BLOCKREDEFINEMODE (0–2).
@@ -4682,6 +4685,7 @@ impl OpenCADStudio {
             block_mru: Vec::new(),
             block_freq: std::collections::HashMap::new(),
             block_mru_list: 50,
+            selection_report: None,
             refedit_options: Default::default(),
             block_redefine_mode: 1,
             block_navigate: ".".to_string(),

src/locale_catalog.rs

@@ -3,6 +3,7 @@
 
 pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static str)> {
     match source {
+        "{removed} found, {removed} removed, {total} total" => Some(("selection-report", "found-removed-total")),
         "Add to Working Set" => Some(("ref-edit", "add-to-working-set")),
         "Remove from Working Set" => Some(("ref-edit", "remove-from-working-set")),
         "Select reference:" => Some(("ref-edit", "select-reference")),

src/modules/annotate/count_cmd.rs

@@ -158,17 +158,10 @@ impl CadCommand for CountCommand {
     }
 
     fn on_selection_complete(&mut self, handles: Vec<Handle>) -> CmdResult {
-        // The selection arrives whole after every pick: `1 found`, then
-        // `1 found, 2 total`.
-        let found = handles.iter().filter(|h| !self.targets.contains(h)).count();
-        let first = self.targets.is_empty();
+        // The selection arrives whole after every pick; the driver reports
+        // what each pick found.
         self.targets = handles;
-        let total = self.targets.len();
-        CmdResult::ReportMeasurement(if first {
-            crate::tf!("{found} found").into_owned()
-        } else {
-            crate::tf!("{found} found, {total} total").into_owned()
-        })
+        CmdResult::NeedPoint
     }
 
     fn needs_entity_pick(&self) -> bool {