forked from 1b-agent/opencadstudio-upstream
fix(i18n): named-argument messages no longer print a stray placeholder
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
This commit is contained in:
Hakan SevenandClaude Opus 5.5 committed
1 parent
33640e050d
commit
34dbc13db0
24 files changed
+176
-176
No files matched your search
@@ -818,7 +818,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: تم تمرير منحنى عبر __ocs_fmt_0__ نقطة.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: يلزم 3 نقاط على الأقل.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: حدد خطًا متعددًا لتمرير منحنى عبره.
|
||||
@@ -1924,8 +1924,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2046,9 +2046,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2172,7 +2172,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2257,7 +2257,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: сплайн прекаран през __ocs_fmt_0__ точки.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: нужни са поне 3 точки.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: избери полилиния, през която да се прекара сплайн.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: proložení spline přes body __ocs_fmt_0__.
|
||||
.splinefit-need-at-least-3-points =SPLINEFIT: potřebujete alespoň 3 body.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: vyberte křivku pro proložení spline.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -806,7 +806,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: Passen Sie einen Spline durch __ocs_fmt_0__ Punkte.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: mindestens 3 Punkte werden benötigt.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: Wählen Sie eine Polylinie, um eine Spline einzupassen.
|
||||
@@ -1912,8 +1912,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2034,9 +2034,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2160,7 +2160,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2245,7 +2245,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -807,7 +807,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: προσαρμογή spline μέσα από __ocs_fmt_0__ σημεία.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: απαιτούνται τουλάχιστον 3 σημεία.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: επιλέξτε μια πολυγραμμή για προσαρμογή spline.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -807,7 +807,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: fit a spline through __ocs_fmt_0__ points.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: need at least 3 points.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: select a polyline to fit a spline through.
|
||||
@@ -1912,8 +1912,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2034,9 +2034,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2160,7 +2160,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2245,7 +2245,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -806,7 +806,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: se ajustó una spline por __ocs_fmt_0__ puntos.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: se necesitan al menos 3 puntos.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: seleccione una polilínea por la que ajustar una spline.
|
||||
@@ -1912,8 +1912,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2034,9 +2034,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2160,7 +2160,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2245,7 +2245,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: sovita spline __ocs_fmt_0__-pisteiden läpi.
|
||||
.splinefit-need-at-least-3-points =SPLINEFIT: tarvitset vähintään 3 pistettä.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: valitse polyline sovittaaksesi splinin läpi.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -806,7 +806,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: adaptez une élingue à des points __ocs_fmt_0__.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: nécessite au moins 3 points.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT : sélectionnez une polyligne pour l'adapter à une spline.
|
||||
@@ -1912,8 +1912,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2034,9 +2034,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2160,7 +2160,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2245,7 +2245,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -794,7 +794,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: __ocs_fmt_0__ अंक के माध्यम से एक स्पैन फिट।
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: कम से कम 3 अंक की आवश्यकता है।
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: एक sline के माध्यम से फिट करने के लिए एक पॉलीलाइन का चयन करें।
|
||||
@@ -1900,8 +1900,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2022,9 +2022,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2148,7 +2148,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2233,7 +2233,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: illesszen be egy spline-t a __ocs_fmt_0__ pontokon.
|
||||
.splinefit-need-at-least-3-points =SPLINEFIT: legalább 3 pont szükséges.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: válasszon egy vonalláncot a spline átillesztéséhez.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: il risultato non si riesce a visualizzare; nessuna modifica apportata.
|
||||
.slice-result-commit-failed = SLICE: impossibile ottenere il risultato; gli oggetti originali sono rimasti come prima.
|
||||
.slice-retained-update-failed = SLICE: non riesco ad aggiornare il risultato ottenuto.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: adatta una spline attraverso i punti __ocs_fmt_0__.
|
||||
.splinefit-need-at-least-3-points =SPLINEFIT: servono almeno 3 punti.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: seleziona una polilinea attraverso la quale inserire una spline.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Scegli almeno un output.
|
||||
.data-extraction-settings = Impostazioni di estrazione dati
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Spaziatura Y:
|
||||
.grid-behavior = Aspetto griglia
|
||||
.grid-spacing = Spaziatura griglia
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -796,7 +796,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: __ocs_fmt_0__ 点を通るスプラインを作成しました。
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: 3 点以上必要です。
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: スプラインを通すポリラインを選択してください。
|
||||
@@ -1902,8 +1902,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2024,9 +2024,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2150,7 +2150,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2235,7 +2235,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: __ocs_fmt_0__ 점을 통해 스플라인을 맞춥니다.
|
||||
.splinefit-need-at-least-3-points =SPLINEFIT: 최소 3개의 포인트가 필요합니다.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: 스플라인에 맞게 폴리선을 선택합니다.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -804,7 +804,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: pas een spline door __ocs_fmt_0__ punten.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: minimaal 3 punten nodig.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: selecteer een polylijn om een spline door te passen.
|
||||
@@ -1912,8 +1912,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2034,9 +2034,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2160,7 +2160,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2245,7 +2245,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: dopasuj splajn przez punkty __ocs_fmt_0__.
|
||||
.splinefit-need-at-least-3-points =SPLINEFIT: potrzebne są co najmniej 3 punkty.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: wybierz polilinię, przez którą ma zostać dopasowany splajn.
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -806,7 +806,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: spline ajustada através de __ocs_fmt_0__ pontos.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: são necessários pelo menos 3 pontos.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: selecione uma polilinha através da qual ajustar uma spline.
|
||||
@@ -1912,8 +1912,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2034,9 +2034,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2160,7 +2160,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2245,7 +2245,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -809,7 +809,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: проведите сплин через точки __ocs_fmt_0__.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: необходимо не менее 3 баллов.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: выберите полилин, чтобы соответствовать сплину.
|
||||
@@ -1915,8 +1915,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2037,9 +2037,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2163,7 +2163,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2248,7 +2248,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -794,7 +794,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: Bir sonuç eksiksiz görüntülenemedi; hiçbir nesne değiştirilmedi.
|
||||
.slice-result-commit-failed = SLICE: Bir sonuç işlenemedi; tüm kaynak nesneler korundu.
|
||||
.slice-retained-update-failed = SLICE: Korunan sonuç güncellenemedi.
|
||||
.slice-created-results = SLICE: __ocs_fmt_0__ sonuç nesnesi oluşturuldu.
|
||||
.slice-created-results = SLICE: __ocs_arg_count__ sonuç nesnesi oluşturuldu.
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: __ocs_fmt_0__ noktadan geçen bir spline uyduruldu.
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT: En az 3 nokta gerekir.
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: İçinden spline geçirilecek bir çoklu çizgi seçin.
|
||||
@@ -1896,8 +1896,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2018,9 +2018,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2144,7 +2144,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2229,7 +2229,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -793,7 +793,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: 匹配一条通过__ocs_fmt_0__点的相片。
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT:至少需要3个点。
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT:选择一条多线以适应通过的分线。
|
||||
@@ -1899,8 +1899,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2021,9 +2021,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2147,7 +2147,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2232,7 +2232,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -805,7 +805,7 @@ common =
|
||||
.slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
|
||||
.slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
|
||||
.slice-retained-update-failed = SLICE: a retained result could not be updated.
|
||||
.slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
|
||||
.slice-created-results = SLICE: created __ocs_arg_count__ result object(s).
|
||||
.splinefit-fit-a-spline-through-n-points = SPLINEFIT: 匹配一條通過__ocs_fmt_0__點的相片。
|
||||
.splinefit-need-at-least-3-points = SPLINEFIT:至少需要3個點。
|
||||
.splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT:選擇一條多線以適應通過的分線。
|
||||
@@ -1911,8 +1911,8 @@ common =
|
||||
.choose-at-least-one-output = Choose at least one output.
|
||||
.data-extraction-settings = Data Extraction Settings
|
||||
.add-drawings = Add Drawings
|
||||
.select-objects-or-settings-selected-enter-to-apply = %__ocs_fmt_0__ Select objects or [Settings] (%__ocs_fmt_1__ selected, Enter to apply):
|
||||
.select-objects-or-settings = %__ocs_fmt_0__ Select objects or [Settings]:
|
||||
.select-objects-or-settings-selected-enter-to-apply = __ocs_arg_cmd__ Select objects or [Settings] (__ocs_arg_count__ selected, Enter to apply):
|
||||
.select-objects-or-settings = __ocs_arg_cmd__ Select objects or [Settings]:
|
||||
.add-parameter = + Add parameter
|
||||
.object-snap-3d = 3D Object Snap
|
||||
.object-snap-on-f4-3d = 3D Object Snap On (F4)
|
||||
@@ -2033,9 +2033,9 @@ common =
|
||||
.grid-y-spacing = Grid Y spacing:
|
||||
.grid-behavior = Grid behavior
|
||||
.grid-spacing = Grid spacing
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:%__ocs_fmt_0__ Scale:%__ocs_fmt_1__ Angle:%__ocs_fmt_2__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created %__ocs_fmt_0__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; %__ocs_fmt_0__ original object(s) retained.
|
||||
.hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties = HATCHEDIT Pattern:__ocs_arg_name__ Scale:__ocs_arg_scale__ Angle:__ocs_arg_angle__ [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:
|
||||
.intersect-created-result-object-s = INTERSECT: created __ocs_arg_count__ result object(s).
|
||||
.intersect-no-positive-area-common-result-original-object-s-retained = INTERSECT: no positive-area common result; __ocs_arg_count__ original object(s) retained.
|
||||
.intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type = INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type.
|
||||
.intersect-the-retained-object-could-not-be-updated = INTERSECT: the retained object could not be updated.
|
||||
.intersect-the-selected-coincident-geometry-is-ambiguous = INTERSECT: the selected coincident geometry is ambiguous.
|
||||
@@ -2159,7 +2159,7 @@ common =
|
||||
.subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter = SUBTRACT Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:
|
||||
.subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter = SUBTRACT Select base Solids, Regions, Surfaces, or Meshes, then press Enter:
|
||||
.subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed = SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed.
|
||||
.subtract-created-result-object-s = SUBTRACT: created %__ocs_fmt_0__ result object(s).
|
||||
.subtract-created-result-object-s = SUBTRACT: created __ocs_arg_count__ result object(s).
|
||||
.subtract-no-compatible-base-and-cutter-types-or-planes-were-selected = SUBTRACT: no compatible base and cutter types or planes were selected.
|
||||
.subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface = SUBTRACT: select at least one base and one cutter Solid, Region, or Surface.
|
||||
.subtract-the-retained-base-object-could-not-be-updated = SUBTRACT: the retained base object could not be updated.
|
||||
@@ -2244,7 +2244,7 @@ common =
|
||||
.trims = Trims
|
||||
.type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits = Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits.
|
||||
.u-isolines-2 = U isolines
|
||||
.union-created-result-object-s = UNION: created %__ocs_fmt_0__ result object(s).
|
||||
.union-created-result-object-s = UNION: created __ocs_arg_count__ result object(s).
|
||||
.union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type = UNION: select at least two solids, Regions, or planar Surfaces of the same type.
|
||||
.union-the-selected-coincident-geometry-is-ambiguous = UNION: the selected coincident geometry is ambiguous.
|
||||
.union-the-selected-geometry-includes-an-unsupported-surface-intersection = UNION: the selected geometry includes an unsupported surface intersection.
|
||||
|
||||
@@ -453,7 +453,7 @@ fn collect_drawing_paths(
|
||||
return Ok(());
|
||||
}
|
||||
if !path.is_dir() {
|
||||
return Err(crate::tf!("Data source not found: %{path}", path = path.display()).into_owned());
|
||||
return Err(crate::t!("Data source not found: %{path}", path = path.display()).into_owned());
|
||||
}
|
||||
for entry in std::fs::read_dir(path).map_err(|error| error.to_string())? {
|
||||
let entry = entry.map_err(|error| error.to_string())?;
|
||||
|
||||
@@ -176,7 +176,7 @@ impl OpenCADStudio {
|
||||
}
|
||||
self.tabs[i].dirty = true;
|
||||
self.command_line.push_output(
|
||||
crate::tf!(
|
||||
crate::t!(
|
||||
"EXTRUDE: created %{created} object(s); %{failed} source(s) could not be extruded.",
|
||||
created = created_handles.len(),
|
||||
failed = failed
|
||||
@@ -427,7 +427,7 @@ impl OpenCADStudio {
|
||||
}
|
||||
self.tabs[i].dirty = true;
|
||||
self.command_line.push_output(
|
||||
crate::tf!(
|
||||
crate::t!(
|
||||
"REVOLVE: created %{created} object(s); %{failed} source(s) could not be revolved.",
|
||||
created = created_handles.len(),
|
||||
failed = failed
|
||||
|
||||
@@ -1148,7 +1148,7 @@ impl super::OpenCADStudio {
|
||||
|
||||
if prepared.is_empty() {
|
||||
self.command_line.push_output(
|
||||
crate::tf!(
|
||||
crate::t!(
|
||||
"INTERSECT: no positive-area common result; %{count} original object(s) retained.",
|
||||
count = retained_without_change
|
||||
)
|
||||
@@ -1215,7 +1215,7 @@ impl super::OpenCADStudio {
|
||||
self.tabs[i].dirty = true;
|
||||
self.refresh_properties();
|
||||
self.command_line.push_output(
|
||||
crate::tf!(
|
||||
crate::t!(
|
||||
"INTERSECT: created %{count} result object(s).",
|
||||
count = results.len()
|
||||
)
|
||||
@@ -1423,7 +1423,7 @@ impl super::OpenCADStudio {
|
||||
self.tabs[i].dirty = true;
|
||||
self.refresh_properties();
|
||||
self.command_line.push_output(
|
||||
crate::tf!("UNION: created %{count} result object(s).", count = created.len()).as_ref(),
|
||||
crate::t!("UNION: created %{count} result object(s).", count = created.len()).as_ref(),
|
||||
);
|
||||
Task::none()
|
||||
}
|
||||
@@ -1695,7 +1695,7 @@ impl super::OpenCADStudio {
|
||||
self.tabs[i].dirty = true;
|
||||
self.refresh_properties();
|
||||
self.command_line.push_output(
|
||||
crate::tf!(
|
||||
crate::t!(
|
||||
"SUBTRACT: created %{count} result object(s).",
|
||||
count = retained.len()
|
||||
)
|
||||
@@ -1928,7 +1928,7 @@ impl super::OpenCADStudio {
|
||||
self.tabs[i].dirty = true;
|
||||
self.refresh_properties();
|
||||
self.command_line.push_output(
|
||||
crate::tf!(
|
||||
crate::t!(
|
||||
"SLICE: created %{count} result object(s).",
|
||||
count = retained.len()
|
||||
)
|
||||
|
||||
Reference in new issue
Block a user