review(#1642, #1643, #1647): one escaped newline, no dead SWEEP prompts, wrapped long lines

The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

locales/ar-SA/opencadstudio.ftl

@@ -3899,11 +3899,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  حدد نقطة الأساس:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  حدد نقطة المرجع الثانية:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  أدخل التعبير:
     .sweep-specify-start-reference-length = SWEEP  حدد طول المرجع الابتدائي

locales/bg-BG/opencadstudio.ftl

@@ -3886,11 +3886,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Посочи базова точка:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  Посочи втора референтна точка:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Въведете израз:
     .sweep-specify-start-reference-length = SWEEP  Задайте начална референтна дължина

locales/cs-CZ/opencadstudio.ftl

@@ -3884,11 +3884,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Určete základní bod:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Zadejte druhý referenční bod:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Zadejte výraz:
     .sweep-specify-start-reference-length = SWEEP  Zadejte počáteční referenční délku

locales/de-DE/opencadstudio.ftl

@@ -3885,11 +3885,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP Basispunkt angeben:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Zweiter Bezugspunkt angeben:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Ausdruck eingeben:
     .sweep-specify-start-reference-length = SWEEP  Anfängliche Referenzlänge angeben

locales/el-GR/opencadstudio.ftl

@@ -3896,11 +3896,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Ορίστε σημείο βάσης:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  Ορίστε δεύτερο σημείο αναφοράς:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Εισαγάγετε έκφραση:
     .sweep-specify-start-reference-length = SWEEP  Καθορίστε το αρχικό μήκος αναφοράς

locales/en-US/opencadstudio.ftl

@@ -3897,11 +3897,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  Align sweep object perpendicular to path [Yes/No]
     .sweep-specify-base-point = SWEEP  Specify base point:
     .sweep-enter-scale-factor-or-reference = SWEEP  Enter scale factor or [Reference/Expression]
-    .sweep-specify-reference-length-or-first-point = SWEEP  Specify reference length or first point
-    .sweep-specify-second-reference-point = SWEEP  Specify second reference point:
-    .sweep-specify-new-length-or-points = SWEEP  Specify new length or [Points]
-    .sweep-specify-first-point-of-new-length = SWEEP  Specify first point of new length:
-    .sweep-specify-second-point-of-new-length = SWEEP  Specify second point of new length:
     .sweep-specify-twist-angle-or-bank = SWEEP  Enter twist angle or allow banking for a non-planar sweep path [Bank/EXpression]
     .sweep-enter-expression = SWEEP  Enter expression:
     .sweep-specify-start-reference-length = SWEEP  Specify start reference length

locales/es-ES/opencadstudio.ftl

@@ -3887,11 +3887,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Especifique el punto base:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  Precise el segundo punto de referencia:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Introduzca la expresión:
     .sweep-specify-start-reference-length = SWEEP  Precise la longitud de referencia inicial

locales/fi-FI/opencadstudio.ftl

@@ -3886,11 +3886,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Määritä peruspiste:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Määritä toinen vertailupiste:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Anna lauseke:
     .sweep-specify-start-reference-length = SWEEP  Määritä alkuviitepituus

locales/fr-FR/opencadstudio.ftl

@@ -3887,11 +3887,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP Spécifier le point de base:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Préciser le deuxième point de référence:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Entrez l'expression :
     .sweep-specify-start-reference-length = SWEEP  Spécifiez la longueur de référence de départ

locales/hi-IN/opencadstudio.ftl

@@ -3875,11 +3875,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP आधार बिंदु निर्दिष्ट करें:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP दूसरे संदर्भ बिंदु को निर्दिष्ट करें:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  व्यंजक दर्ज करें:
     .sweep-specify-start-reference-length = SWEEP  प्रारंभिक संदर्भ लंबाई निर्दिष्ट करें

locales/hu-HU/opencadstudio.ftl

@@ -3886,11 +3886,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Adja meg a bázispontot:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Második referenciapont megadása:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Adja meg a kifejezést:
     .sweep-specify-start-reference-length = SWEEP  Adja meg a kezdő referenciahosszt

locales/it-IT/opencadstudio.ftl

@@ -3886,11 +3886,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Specificare il punto base:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Specificare il secondo punto di riferimento:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Immettere l'espressione:
     .sweep-specify-start-reference-length = SWEEP  Specificare la lunghezza di riferimento iniziale

locales/ja-JP/opencadstudio.ftl

@@ -3875,11 +3875,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  基点を指定:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  2 番目の参照点を指定:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  式を入力:
     .sweep-specify-start-reference-length = SWEEP  開始参照長さを指定

locales/ko-KR/opencadstudio.ftl

@@ -3886,11 +3886,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  기준점을 지정하세요:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP 두 번째 참조점 지정:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  식 입력:
     .sweep-specify-start-reference-length = SWEEP  시작 참조 길이 지정

locales/nl-NL/opencadstudio.ftl

@@ -3885,11 +3885,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP Basispunt specificeren:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Tweede referentiepunt opgeven:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Voer de expressie in:
     .sweep-specify-start-reference-length = SWEEP  Geef de begin-referentielengte op

locales/pl-PL/opencadstudio.ftl

@@ -3886,11 +3886,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Określ punkt bazowy:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Określ drugi punkt odniesienia:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Wprowadź wyrażenie:
     .sweep-specify-start-reference-length = SWEEP  Określ początkową długość odniesienia

locales/pt-BR/opencadstudio.ftl

@@ -3888,11 +3888,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Especifique o ponto base:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  Especifique o segundo ponto de referência:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Insira a expressão:
     .sweep-specify-start-reference-length = SWEEP  Especifique o comprimento de referência inicial

locales/ru-RU/opencadstudio.ftl

@@ -3888,11 +3888,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP Укажите базовую точку:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP Укажите вторую точку отсчета:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  Введите выражение:
     .sweep-specify-start-reference-length = SWEEP  Укажите начальную опорную длину

locales/tr-TR/opencadstudio.ftl

@@ -3854,11 +3854,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  Temel noktayı belirtin:
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  İkinci referans noktasını belirtin:
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  İfadeyi girin:
     .sweep-specify-start-reference-length = SWEEP  Başlangıç referans uzunluğunu belirtin

locales/zh-CN/opencadstudio.ftl

@@ -3870,11 +3870,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  指定基点：
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  指定第二个参照点：
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  输入表达式:
     .sweep-specify-start-reference-length = SWEEP  指定起点参照长度

locales/zh-TW/opencadstudio.ftl

@@ -3882,11 +3882,6 @@ insert =
     .sweep-align-sweep-object-perpendicular-to-path-yes-no = SWEEP  { common.alignment-title-case }: { model.sweep } ⟂ { common.path } [{ common.yes }/{ common.no }]
     .sweep-specify-base-point = SWEEP  指定基點：
     .sweep-enter-scale-factor-or-reference = SWEEP  { common.specify }: { style-manager.scale-factor } [{ common.reference }/{ common.expression }]
-    .sweep-specify-reference-length-or-first-point = SWEEP  { common.specify }: { common.reference-length } · { draw.first-point }:
-    .sweep-specify-second-reference-point = SWEEP  指定第二個參照點：
-    .sweep-specify-new-length-or-points = SWEEP  { common.specify }: { common.new-length } [{ common.points }]:
-    .sweep-specify-first-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { draw.first-point }:
-    .sweep-specify-second-point-of-new-length = SWEEP  { common.specify }: { common.new-length } · { model.second-point }:
     .sweep-specify-twist-angle-or-bank = SWEEP  { common.specify }: { properties.twist } · { common.angle } [{ common.bank }/{ common.expression }]
     .sweep-enter-expression = SWEEP  輸入運算式:
     .sweep-specify-start-reference-length = SWEEP  指定起點參考長度

src/app/automation.rs

@@ -202,18 +202,23 @@ fn serve_socket_with_idle(
 
 /// The entities inside block definitions: owned by (or listed in) a block
 /// record that is not a layout's model or paper space.
-fn definition_members(document: &codec::CadDocument) -> std::collections::HashSet<codec::Handle> {
+fn definition_members(
+    document: &codec::CadDocument,
+) -> std::collections::HashSet<codec::Handle> {
     let mut layouts: std::collections::HashSet<codec::Handle> = document
         .objects
         .values()
         .filter_map(|object| match object {
-            codec::objects::ObjectType::Layout(layout) if !layout.block_record.is_null() => Some(layout.block_record),
+            codec::objects::ObjectType::Layout(layout) if !layout.block_record.is_null() => {
+                Some(layout.block_record)
+            }
             _ => None,
         })
         .collect();
     layouts.extend(document.block_records.iter().filter_map(|record| {
         let name = record.name.to_ascii_uppercase();
-        (name.starts_with("*MODEL_SPACE") || name.starts_with("*PAPER_SPACE")).then_some(record.handle)
+        (name.starts_with("*MODEL_SPACE") || name.starts_with("*PAPER_SPACE"))
+            .then_some(record.handle)
     }));
     let definitions: std::collections::HashSet<codec::Handle> = document
         .block_records
@@ -838,7 +843,10 @@ impl OpenCADStudio {
                         arr.iter()
                             .filter_map(|h| h.as_str())
                             .filter_map(|h| {
-                                let h = h.strip_prefix("0x").or_else(|| h.strip_prefix("0X")).unwrap_or(h);
+                                let h = h
+                                    .strip_prefix("0x")
+                                    .or_else(|| h.strip_prefix("0X"))
+                                    .unwrap_or(h);
                                 u64::from_str_radix(h, 16).ok().map(codec::Handle::new)
                             })
                             .collect()
@@ -881,7 +889,10 @@ impl OpenCADStudio {
                         let handles: Vec<codec::Handle> = scene
                             .document
                             .entities()
-                            .filter(|e| e.common().owner_handle == space || listed.contains(&e.common().handle))
+                            .filter(|e| {
+                                e.common().owner_handle == space
+                                    || listed.contains(&e.common().handle)
+                            })
                             .filter(|e| type_filter.is_none_or(|t| entity_type_matches(e, t)))
                             .filter(|e| layer_filter.is_none_or(|l| e.common().layer == l))
                             .map(|e| e.common().handle)

src/app/commands/count.rs

@@ -580,9 +580,9 @@ impl OpenCADStudio {
             .collect();
         let hosting = hosts.iter().any(|h| match doc.get_entity(*h) {
             Some(entity) => crate::entities::field::hosts_field(doc, entity),
-            None => attributes
-                .iter()
-                .any(|common| common.handle == *h && crate::entities::field::common_hosts_field(doc, common)),
+            None => attributes.iter().any(|common| {
+                common.handle == *h && crate::entities::field::common_hosts_field(doc, common)
+            }),
         });
         if !hosting {
             self.command_line.push_output(&crate::tf!("{found} field(s) found.", found = 0));

src/locale_catalog.rs

@@ -4464,11 +4464,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "SWEEP  Align sweep object perpendicular to path [Yes/No]" => Some(("insert", "sweep-align-sweep-object-perpendicular-to-path-yes-no")),
         "SWEEP  Specify base point:" => Some(("insert", "sweep-specify-base-point")),
         "SWEEP  Enter scale factor or [Reference/Expression]" => Some(("insert", "sweep-enter-scale-factor-or-reference")),
-        "SWEEP  Specify reference length or first point" => Some(("insert", "sweep-specify-reference-length-or-first-point")),
-        "SWEEP  Specify second reference point:" => Some(("insert", "sweep-specify-second-reference-point")),
-        "SWEEP  Specify new length or [Points]" => Some(("insert", "sweep-specify-new-length-or-points")),
-        "SWEEP  Specify first point of new length:" => Some(("insert", "sweep-specify-first-point-of-new-length")),
-        "SWEEP  Specify second point of new length:" => Some(("insert", "sweep-specify-second-point-of-new-length")),
         "SWEEP  Enter twist angle or allow banking for a non-planar sweep path [Bank/EXpression]" => Some(("insert", "sweep-specify-twist-angle-or-bank")),
         "SWEEP  Enter expression:" => Some(("insert", "sweep-enter-expression")),
         "SWEEP  Specify start reference length" => Some(("insert", "sweep-specify-start-reference-length")),

src/modules/insert/solid3d_cmds.rs

@@ -1838,8 +1838,9 @@ impl CadCommand for SweepCommand {
         if (self.options.scale - 1.0).abs() > 1e-12 {
             if let Some(message) = crate::scene::model::sweep_model::scaled_sweep_path_refusal(&path) {
                 return CmdResult::ReportMeasurement(format!(
-                    "{}
-{}", t!(message), t!("The selected path curve is not valid."),
+                    "{}\n{}",
+                    t!(message),
+                    t!("The selected path curve is not valid."),
                 ));
             }
         }