1b-agent/OneCAD-Draft
1
0 Fork 0
forked from 1b-agent/opencadstudio-upstream
Code Pull Requests Activity

feat(layout): MVSETUP sets a drawing up for plotting

Browse Source 
In model space MVSETUP draws the sheet border at the drawing scale
(scale factor, paper width and height) and zooms to it, or switches to
a layout. On a layout it creates viewports in a bounding area (a single
one, a 2x2 engineering set of top/front/right/isometric views, or an
array with spacing), deletes picked objects, and scales picked
viewports to a paper/model unit ratio.

A viewport's fit to the model now measures the model along the
viewport's own view direction, so side and isometric views frame it
too.

Refs #1501

Co-Authored-By: Claude Opus 5.5 <[email protected]>
This commit is contained in:
Hakan SevenandClaude Opus 5.5 committed 2026-10-13 15:21:26 +03:00
1 parent b1d4c9bd9b
commit 57eb7fe4db
31 files changed
+929 -10
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

locales/ar-SA/opencadstudio.ftl
+19
View File
@@ -4436,6 +4436,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP حدد الكائنات المراد حذفها:
.delete-objects-option = حذف الكائنات
.mvsetup-enable-paper-space = MVSETUP تمكين فضاء الورق؟ [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP أدخل معامل المقياس <1>:
.mvsetup-enter-paper-width = MVSETUP أدخل عرض الورقة:
.mvsetup-enter-paper-height = MVSETUP أدخل ارتفاع الورقة:
.mvsetup-enter-option = MVSETUP أدخل خيارًا [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP أدخل تخطيط منافذ العرض [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP حدد الزاوية الأولى لمنطقة منافذ العرض <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP حدد الزاوية المقابلة:
.mvsetup-viewports-in-x = MVSETUP أدخل عدد منافذ العرض في اتجاه X <2>:
.mvsetup-viewports-in-y = MVSETUP أدخل عدد منافذ العرض في اتجاه Y <2>:
.mvsetup-distance-in-x = MVSETUP حدد المسافة بين منافذ العرض في اتجاه X <0>:
.mvsetup-distance-in-y = MVSETUP حدد المسافة بين منافذ العرض في اتجاه Y <0>:
.mvsetup-select-viewports = MVSETUP حدد منافذ العرض المراد تغيير مقياسها:
.mvsetup-paper-space-units = MVSETUP أدخل عدد وحدات فضاء الورق <1>:
.mvsetup-model-space-units = MVSETUP أدخل عدد وحدات فضاء النموذج <1>:
.mvsetup-viewports-do-not-fit = MVSETUP منافذ العرض لا تتسع في المنطقة المحددة.
.scale-viewports-option = تغيير مقياس منافذ العرض
.active = نشط
.inactive = غير نشط
.insert-view = إدراج عرض
locales/bg-BG/opencadstudio.ftl
+19
View File
@@ -4423,6 +4423,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Изберете обектите за изтриване:
.delete-objects-option = Изтриване на обекти
.mvsetup-enable-paper-space = MVSETUP Активиране на хартиеното пространство? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Въведете мащабен коефициент <1>:
.mvsetup-enter-paper-width = MVSETUP Въведете ширина на листа:
.mvsetup-enter-paper-height = MVSETUP Въведете височина на листа:
.mvsetup-enter-option = MVSETUP Въведете опция [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Въведете подредба на прозорците [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Задайте първи ъгъл на областта за прозорците <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Задайте противоположен ъгъл:
.mvsetup-viewports-in-x = MVSETUP Въведете брой прозорци по X <2>:
.mvsetup-viewports-in-y = MVSETUP Въведете брой прозорци по Y <2>:
.mvsetup-distance-in-x = MVSETUP Задайте разстояние между прозорците по X <0>:
.mvsetup-distance-in-y = MVSETUP Задайте разстояние между прозорците по Y <0>:
.mvsetup-select-viewports = MVSETUP Изберете прозорците за мащабиране:
.mvsetup-paper-space-units = MVSETUP Въведете броя единици в хартиеното пространство <1>:
.mvsetup-model-space-units = MVSETUP Въведете броя единици в пространството на модела <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Прозорците не се побират в областта.
.scale-viewports-option = Мащабиране на прозорците
.active = Активно
.inactive = Неактивно
.insert-view = Вмъкни изглед
locales/cs-CZ/opencadstudio.ftl
+19
View File
@@ -4421,6 +4421,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Vyberte objekty k odstranění:
.delete-objects-option = Odstranit objekty
.mvsetup-enable-paper-space = MVSETUP Povolit výkresový prostor? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Zadejte měřítko <1>:
.mvsetup-enter-paper-width = MVSETUP Zadejte šířku papíru:
.mvsetup-enter-paper-height = MVSETUP Zadejte výšku papíru:
.mvsetup-enter-option = MVSETUP Zadejte možnost [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Zadejte rozvržení výřezů [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Zadejte první roh oblasti pro výřezy <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Zadejte protější roh:
.mvsetup-viewports-in-x = MVSETUP Zadejte počet výřezů ve směru X <2>:
.mvsetup-viewports-in-y = MVSETUP Zadejte počet výřezů ve směru Y <2>:
.mvsetup-distance-in-x = MVSETUP Zadejte vzdálenost mezi výřezy ve směru X <0>:
.mvsetup-distance-in-y = MVSETUP Zadejte vzdálenost mezi výřezy ve směru Y <0>:
.mvsetup-select-viewports = MVSETUP Vyberte výřezy ke změně měřítka:
.mvsetup-paper-space-units = MVSETUP Zadejte počet jednotek výkresového prostoru <1>:
.mvsetup-model-space-units = MVSETUP Zadejte počet jednotek modelového prostoru <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Výřezy se do oblasti nevejdou.
.scale-viewports-option = Měřítko výřezů
.active = Aktivní
.inactive = Neaktivní
.insert-view = Vložit pohled
locales/de-DE/opencadstudio.ftl
+19
View File
@@ -4422,6 +4422,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Zu löschende Objekte wählen:
.delete-objects-option = Objekte löschen
.mvsetup-enable-paper-space = MVSETUP Papierbereich aktivieren? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Skalierfaktor eingeben <1>:
.mvsetup-enter-paper-width = MVSETUP Papierbreite eingeben:
.mvsetup-enter-paper-height = MVSETUP Papierhöhe eingeben:
.mvsetup-enter-option = MVSETUP Option eingeben [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Ansichtsfensteranordnung eingeben [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Erste Ecke des Bereichs für Ansichtsfenster angeben <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Gegenüberliegende Ecke angeben:
.mvsetup-viewports-in-x = MVSETUP Anzahl der Ansichtsfenster in X-Richtung eingeben <2>:
.mvsetup-viewports-in-y = MVSETUP Anzahl der Ansichtsfenster in Y-Richtung eingeben <2>:
.mvsetup-distance-in-x = MVSETUP Abstand zwischen Ansichtsfenstern in X-Richtung angeben <0>:
.mvsetup-distance-in-y = MVSETUP Abstand zwischen Ansichtsfenstern in Y-Richtung angeben <0>:
.mvsetup-select-viewports = MVSETUP Zu skalierende Ansichtsfenster wählen:
.mvsetup-paper-space-units = MVSETUP Anzahl der Papierbereichseinheiten eingeben <1>:
.mvsetup-model-space-units = MVSETUP Anzahl der Modellbereichseinheiten eingeben <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Die Ansichtsfenster passen nicht in den Bereich.
.scale-viewports-option = Ansichtsfenster skalieren
.active = Aktiv
.inactive = Inaktiv
.insert-view = Ansicht einfügen
locales/el-GR/opencadstudio.ftl
+19
View File
@@ -4424,6 +4424,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Επιλέξτε τα αντικείμενα για διαγραφή:
.delete-objects-option = Διαγραφή αντικειμένων
.mvsetup-enable-paper-space = MVSETUP Ενεργοποίηση χώρου χαρτιού; [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Εισαγάγετε συντελεστή κλίμακας <1>:
.mvsetup-enter-paper-width = MVSETUP Εισαγάγετε πλάτος χαρτιού:
.mvsetup-enter-paper-height = MVSETUP Εισαγάγετε ύψος χαρτιού:
.mvsetup-enter-option = MVSETUP Εισαγάγετε επιλογή [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Εισαγάγετε διάταξη παραθύρων [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Καθορίστε πρώτη γωνία της περιοχής παραθύρων <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Καθορίστε την απέναντι γωνία:
.mvsetup-viewports-in-x = MVSETUP Εισαγάγετε αριθμό παραθύρων στην κατεύθυνση X <2>:
.mvsetup-viewports-in-y = MVSETUP Εισαγάγετε αριθμό παραθύρων στην κατεύθυνση Y <2>:
.mvsetup-distance-in-x = MVSETUP Καθορίστε απόσταση μεταξύ παραθύρων στην κατεύθυνση X <0>:
.mvsetup-distance-in-y = MVSETUP Καθορίστε απόσταση μεταξύ παραθύρων στην κατεύθυνση Y <0>:
.mvsetup-select-viewports = MVSETUP Επιλέξτε τα παράθυρα για κλιμάκωση:
.mvsetup-paper-space-units = MVSETUP Εισαγάγετε αριθμό μονάδων χώρου χαρτιού <1>:
.mvsetup-model-space-units = MVSETUP Εισαγάγετε αριθμό μονάδων χώρου μοντέλου <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Τα παράθυρα δεν χωρούν στην περιοχή.
.scale-viewports-option = Κλιμάκωση παραθύρων
.active = Ενεργή
.inactive = Ανενεργή
.insert-view = Εισαγωγή προβολής
locales/en-US/opencadstudio.ftl
+19
View File
@@ -4423,6 +4423,25 @@ model =
.cube = Cube
layout =
.mvsetup-select-objects-to-delete = MVSETUP Select the objects to delete:
.delete-objects-option = Delete objects
.mvsetup-enable-paper-space = MVSETUP Enable paper space? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Enter the scale factor <1>:
.mvsetup-enter-paper-width = MVSETUP Enter the paper width:
.mvsetup-enter-paper-height = MVSETUP Enter the paper height:
.mvsetup-enter-option = MVSETUP Enter an option [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Enter viewport layout [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Specify first corner of bounding area for viewport(s) <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Specify opposite corner:
.mvsetup-viewports-in-x = MVSETUP Enter number of viewports in X direction <2>:
.mvsetup-viewports-in-y = MVSETUP Enter number of viewports in Y direction <2>:
.mvsetup-distance-in-x = MVSETUP Specify distance between viewports in X direction <0>:
.mvsetup-distance-in-y = MVSETUP Specify distance between viewports in Y direction <0>:
.mvsetup-select-viewports = MVSETUP Select the viewports to scale:
.mvsetup-paper-space-units = MVSETUP Enter the number of paper space units <1>:
.mvsetup-model-space-units = MVSETUP Enter the number of model space units <1>:
.mvsetup-viewports-do-not-fit = MVSETUP The viewports do not fit in the bounding area.
.scale-viewports-option = Scale viewports
.active = Active
.inactive = Inactive
.insert-view = Insert view
locales/es-ES/opencadstudio.ftl
+19
View File
@@ -4424,6 +4424,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Seleccione los objetos que desea suprimir:
.delete-objects-option = Suprimir objetos
.mvsetup-enable-paper-space = MVSETUP ¿Activar espacio papel? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Indique el factor de escala <1>:
.mvsetup-enter-paper-width = MVSETUP Indique la anchura del papel:
.mvsetup-enter-paper-height = MVSETUP Indique la altura del papel:
.mvsetup-enter-option = MVSETUP Indique una opción [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Indique la disposición de ventanas [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Precise la primera esquina del área de ventanas <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Precise la esquina opuesta:
.mvsetup-viewports-in-x = MVSETUP Indique el número de ventanas en dirección X <2>:
.mvsetup-viewports-in-y = MVSETUP Indique el número de ventanas en dirección Y <2>:
.mvsetup-distance-in-x = MVSETUP Precise la distancia entre ventanas en dirección X <0>:
.mvsetup-distance-in-y = MVSETUP Precise la distancia entre ventanas en dirección Y <0>:
.mvsetup-select-viewports = MVSETUP Seleccione las ventanas que desea escalar:
.mvsetup-paper-space-units = MVSETUP Indique el número de unidades de espacio papel <1>:
.mvsetup-model-space-units = MVSETUP Indique el número de unidades de espacio modelo <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Las ventanas no caben en el área.
.scale-viewports-option = Escalar ventanas
.active = Activo
.inactive = Inactivo
.insert-view = Insertar vista
locales/fi-FI/opencadstudio.ftl
+19
View File
@@ -4423,6 +4423,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Valitse poistettavat objektit:
.delete-objects-option = Poista objektit
.mvsetup-enable-paper-space = MVSETUP Otetaanko paperitila käyttöön? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Anna mittakaavakerroin <1>:
.mvsetup-enter-paper-width = MVSETUP Anna paperin leveys:
.mvsetup-enter-paper-height = MVSETUP Anna paperin korkeus:
.mvsetup-enter-option = MVSETUP Anna valinta [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Anna näkymäikkunoiden asettelu [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Määritä näkymäikkunoiden alueen ensimmäinen kulma <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Määritä vastakkainen kulma:
.mvsetup-viewports-in-x = MVSETUP Anna näkymäikkunoiden määrä X-suunnassa <2>:
.mvsetup-viewports-in-y = MVSETUP Anna näkymäikkunoiden määrä Y-suunnassa <2>:
.mvsetup-distance-in-x = MVSETUP Määritä näkymäikkunoiden väli X-suunnassa <0>:
.mvsetup-distance-in-y = MVSETUP Määritä näkymäikkunoiden väli Y-suunnassa <0>:
.mvsetup-select-viewports = MVSETUP Valitse skaalattavat näkymäikkunat:
.mvsetup-paper-space-units = MVSETUP Anna paperitilan yksiköiden määrä <1>:
.mvsetup-model-space-units = MVSETUP Anna mallitilan yksiköiden määrä <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Näkymäikkunat eivät mahdu alueelle.
.scale-viewports-option = Skaalaa näkymäikkunat
.active = Aktiivinen
.inactive = Ei-aktiivinen
.insert-view = Lisää näkymä
locales/fr-FR/opencadstudio.ftl
+19
View File
@@ -4425,6 +4425,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Sélectionnez les objets à supprimer :
.delete-objects-option = Supprimer des objets
.mvsetup-enable-paper-space = MVSETUP Activer l’espace papier ? [No/Yes] <Y> :
.mvsetup-enter-scale-factor = MVSETUP Entrez le facteur d’échelle <1> :
.mvsetup-enter-paper-width = MVSETUP Entrez la largeur du papier :
.mvsetup-enter-paper-height = MVSETUP Entrez la hauteur du papier :
.mvsetup-enter-option = MVSETUP Entrez une option [Create/Delete objects/Scale viewports] :
.mvsetup-enter-viewport-layout = MVSETUP Entrez la disposition des fenêtres [Single/Engineering/Array] <Single> :
.mvsetup-specify-first-corner = MVSETUP Spécifiez le premier coin de la zone des fenêtres <Sheet> :
.mvsetup-specify-opposite-corner = MVSETUP Spécifiez le coin opposé :
.mvsetup-viewports-in-x = MVSETUP Entrez le nombre de fenêtres en X <2> :
.mvsetup-viewports-in-y = MVSETUP Entrez le nombre de fenêtres en Y <2> :
.mvsetup-distance-in-x = MVSETUP Spécifiez la distance entre les fenêtres en X <0> :
.mvsetup-distance-in-y = MVSETUP Spécifiez la distance entre les fenêtres en Y <0> :
.mvsetup-select-viewports = MVSETUP Sélectionnez les fenêtres à mettre à l’échelle :
.mvsetup-paper-space-units = MVSETUP Entrez le nombre d’unités de l’espace papier <1> :
.mvsetup-model-space-units = MVSETUP Entrez le nombre d’unités de l’espace objet <1> :
.mvsetup-viewports-do-not-fit = MVSETUP Les fenêtres ne tiennent pas dans la zone.
.scale-viewports-option = Échelle des fenêtres
.active = Actif
.inactive = Inactif
.insert-view = Insérer une vue
locales/hi-IN/opencadstudio.ftl
+19
View File
@@ -4412,6 +4412,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP हटाने के लिए ऑब्जेक्ट चुनें:
.delete-objects-option = ऑब्जेक्ट हटाएँ
.mvsetup-enable-paper-space = MVSETUP पेपर स्पेस सक्षम करें? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP स्केल फ़ैक्टर दर्ज करें <1>:
.mvsetup-enter-paper-width = MVSETUP पेपर की चौड़ाई दर्ज करें:
.mvsetup-enter-paper-height = MVSETUP पेपर की ऊँचाई दर्ज करें:
.mvsetup-enter-option = MVSETUP विकल्प दर्ज करें [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP व्यूपोर्ट लेआउट दर्ज करें [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP व्यूपोर्ट क्षेत्र का पहला कोना निर्दिष्ट करें <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP विपरीत कोना निर्दिष्ट करें:
.mvsetup-viewports-in-x = MVSETUP X दिशा में व्यूपोर्ट की संख्या दर्ज करें <2>:
.mvsetup-viewports-in-y = MVSETUP Y दिशा में व्यूपोर्ट की संख्या दर्ज करें <2>:
.mvsetup-distance-in-x = MVSETUP X दिशा में व्यूपोर्ट के बीच दूरी निर्दिष्ट करें <0>:
.mvsetup-distance-in-y = MVSETUP Y दिशा में व्यूपोर्ट के बीच दूरी निर्दिष्ट करें <0>:
.mvsetup-select-viewports = MVSETUP स्केल करने के लिए व्यूपोर्ट चुनें:
.mvsetup-paper-space-units = MVSETUP पेपर स्पेस इकाइयों की संख्या दर्ज करें <1>:
.mvsetup-model-space-units = MVSETUP मॉडल स्पेस इकाइयों की संख्या दर्ज करें <1>:
.mvsetup-viewports-do-not-fit = MVSETUP व्यूपोर्ट क्षेत्र में फिट नहीं होते।
.scale-viewports-option = व्यूपोर्ट स्केल करें
.active = सक्रिय
.inactive = निष्क्रिय
.insert-view = दृश्य डालें
locales/hu-HU/opencadstudio.ftl
+19
View File
@@ -4421,6 +4421,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Válassza ki a törlendő objektumokat:
.delete-objects-option = Objektumok törlése
.mvsetup-enable-paper-space = MVSETUP Papírtér engedélyezése? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Adja meg a léptéktényezőt <1>:
.mvsetup-enter-paper-width = MVSETUP Adja meg a papír szélességét:
.mvsetup-enter-paper-height = MVSETUP Adja meg a papír magasságát:
.mvsetup-enter-option = MVSETUP Adja meg a lehetőséget [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Adja meg a nézetablak-elrendezést [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Adja meg a nézetablakok területének első sarkát <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Adja meg a szemközti sarkot:
.mvsetup-viewports-in-x = MVSETUP Adja meg a nézetablakok számát X irányban <2>:
.mvsetup-viewports-in-y = MVSETUP Adja meg a nézetablakok számát Y irányban <2>:
.mvsetup-distance-in-x = MVSETUP Adja meg a nézetablakok távolságát X irányban <0>:
.mvsetup-distance-in-y = MVSETUP Adja meg a nézetablakok távolságát Y irányban <0>:
.mvsetup-select-viewports = MVSETUP Válassza ki a méretezendő nézetablakokat:
.mvsetup-paper-space-units = MVSETUP Adja meg a papírtér egységeinek számát <1>:
.mvsetup-model-space-units = MVSETUP Adja meg a modelltér egységeinek számát <1>:
.mvsetup-viewports-do-not-fit = MVSETUP A nézetablakok nem férnek el a területen.
.scale-viewports-option = Nézetablakok méretezése
.active = Aktív
.inactive = Inaktív
.insert-view = Nézet beszúrása
locales/it-IT/opencadstudio.ftl
+19
View File
@@ -4423,6 +4423,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Selezionare gli oggetti da eliminare:
.delete-objects-option = Elimina oggetti
.mvsetup-enable-paper-space = MVSETUP Attivare lo spazio carta? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Immettere il fattore di scala <1>:
.mvsetup-enter-paper-width = MVSETUP Immettere la larghezza del foglio:
.mvsetup-enter-paper-height = MVSETUP Immettere l'altezza del foglio:
.mvsetup-enter-option = MVSETUP Immettere un'opzione [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Immettere la disposizione delle finestre [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Specificare il primo angolo dell'area delle finestre <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Specificare l'angolo opposto:
.mvsetup-viewports-in-x = MVSETUP Immettere il numero di finestre in direzione X <2>:
.mvsetup-viewports-in-y = MVSETUP Immettere il numero di finestre in direzione Y <2>:
.mvsetup-distance-in-x = MVSETUP Specificare la distanza tra le finestre in direzione X <0>:
.mvsetup-distance-in-y = MVSETUP Specificare la distanza tra le finestre in direzione Y <0>:
.mvsetup-select-viewports = MVSETUP Selezionare le finestre da scalare:
.mvsetup-paper-space-units = MVSETUP Immettere il numero di unità dello spazio carta <1>:
.mvsetup-model-space-units = MVSETUP Immettere il numero di unità dello spazio modello <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Le finestre non entrano nell'area.
.scale-viewports-option = Scala finestre
.active = Attivo
.inactive = Inattivo
.insert-view = Inserisci vista
locales/ja-JP/opencadstudio.ftl
+19
View File
@@ -4412,6 +4412,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP 削除するオブジェクトを選択:
.delete-objects-option = オブジェクトを削除
.mvsetup-enable-paper-space = MVSETUP ペーパー空間を有効にしますか? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP 尺度を入力 <1>:
.mvsetup-enter-paper-width = MVSETUP 用紙の幅を入力:
.mvsetup-enter-paper-height = MVSETUP 用紙の高さを入力:
.mvsetup-enter-option = MVSETUP オプションを入力 [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP ビューポートの配置を入力 [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP ビューポート領域の最初のコーナーを指定 <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP もう一方のコーナーを指定:
.mvsetup-viewports-in-x = MVSETUP X 方向のビューポート数を入力 <2>:
.mvsetup-viewports-in-y = MVSETUP Y 方向のビューポート数を入力 <2>:
.mvsetup-distance-in-x = MVSETUP X 方向のビューポート間隔を指定 <0>:
.mvsetup-distance-in-y = MVSETUP Y 方向のビューポート間隔を指定 <0>:
.mvsetup-select-viewports = MVSETUP 尺度を設定するビューポートを選択:
.mvsetup-paper-space-units = MVSETUP ペーパー空間の単位数を入力 <1>:
.mvsetup-model-space-units = MVSETUP モデル空間の単位数を入力 <1>:
.mvsetup-viewports-do-not-fit = MVSETUP ビューポートが領域に収まりません。
.scale-viewports-option = ビューポートの尺度
.active = アクティブ
.inactive = 非アクティブ
.insert-view = ビューを挿入
locales/ko-KR/opencadstudio.ftl
+19
View File
@@ -4423,6 +4423,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP 삭제할 객체 선택:
.delete-objects-option = 객체 삭제
.mvsetup-enable-paper-space = MVSETUP 도면 공간을 사용하시겠습니까? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP 축척 비율 입력 <1>:
.mvsetup-enter-paper-width = MVSETUP 용지 폭 입력:
.mvsetup-enter-paper-height = MVSETUP 용지 높이 입력:
.mvsetup-enter-option = MVSETUP 옵션 입력 [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP 뷰포트 배치 입력 [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP 뷰포트 영역의 첫 번째 구석 지정 <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP 반대 구석 지정:
.mvsetup-viewports-in-x = MVSETUP X 방향 뷰포트 수 입력 <2>:
.mvsetup-viewports-in-y = MVSETUP Y 방향 뷰포트 수 입력 <2>:
.mvsetup-distance-in-x = MVSETUP X 방향 뷰포트 간 거리 지정 <0>:
.mvsetup-distance-in-y = MVSETUP Y 방향 뷰포트 간 거리 지정 <0>:
.mvsetup-select-viewports = MVSETUP 축척할 뷰포트 선택:
.mvsetup-paper-space-units = MVSETUP 도면 공간 단위 수 입력 <1>:
.mvsetup-model-space-units = MVSETUP 모형 공간 단위 수 입력 <1>:
.mvsetup-viewports-do-not-fit = MVSETUP 뷰포트가 영역에 맞지 않습니다.
.scale-viewports-option = 뷰포트 축척
.active = 활성
.inactive = 비활성
.insert-view = 삽입 뷰
locales/lo-LA/opencadstudio.ftl
+19
View File
@@ -4424,6 +4424,25 @@ model =
.cube = ລູກບາດກ໌
layout =
.mvsetup-select-objects-to-delete = MVSETUP ເລືອກວັດຖຸທີ່ຈະລຶບ:
.delete-objects-option = ລຶບວັດຖຸ
.mvsetup-enable-paper-space = MVSETUP ເປີດໃຊ້ພື້ນທີ່ເຈ້ຍບໍ? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP ໃສ່ຕົວຄູນມາດຕາສ່ວນ <1>:
.mvsetup-enter-paper-width = MVSETUP ໃສ່ຄວາມກວ້າງເຈ້ຍ:
.mvsetup-enter-paper-height = MVSETUP ໃສ່ຄວາມສູງເຈ້ຍ:
.mvsetup-enter-option = MVSETUP ໃສ່ຕົວເລືອກ [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP ໃສ່ການຈັດວາງຊ່ອງມອງ [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP ກຳນົດມຸມທຳອິດຂອງພື້ນທີ່ຊ່ອງມອງ <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP ກຳນົດມຸມກົງກັນຂ້າມ:
.mvsetup-viewports-in-x = MVSETUP ໃສ່ຈຳນວນຊ່ອງມອງໃນທິດ X <2>:
.mvsetup-viewports-in-y = MVSETUP ໃສ່ຈຳນວນຊ່ອງມອງໃນທິດ Y <2>:
.mvsetup-distance-in-x = MVSETUP ກຳນົດໄລຍະຫ່າງລະຫວ່າງຊ່ອງມອງໃນທິດ X <0>:
.mvsetup-distance-in-y = MVSETUP ກຳນົດໄລຍະຫ່າງລະຫວ່າງຊ່ອງມອງໃນທິດ Y <0>:
.mvsetup-select-viewports = MVSETUP ເລືອກຊ່ອງມອງທີ່ຈະປັບມາດຕາສ່ວນ:
.mvsetup-paper-space-units = MVSETUP ໃສ່ຈຳນວນຫົວໜ່ວຍພື້ນທີ່ເຈ້ຍ <1>:
.mvsetup-model-space-units = MVSETUP ໃສ່ຈຳນວນຫົວໜ່ວຍພື້ນທີ່ແບບຈຳລອງ <1>:
.mvsetup-viewports-do-not-fit = MVSETUP ຊ່ອງມອງບໍ່ພໍດີກັບພື້ນທີ່.
.scale-viewports-option = ປັບມາດຕາສ່ວນຊ່ອງມອງ
.active = ໃຊ້ງານຢູ່
.inactive = ບໍ່ໄດ້ໃຊ້ງານ
.insert-view = ແຊກມຸມມອງ
locales/nl-NL/opencadstudio.ftl
+19
View File
@@ -4422,6 +4422,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Selecteer de te verwijderen objecten:
.delete-objects-option = Objecten verwijderen
.mvsetup-enable-paper-space = MVSETUP Papierruimte inschakelen? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Geef schaalfactor op <1>:
.mvsetup-enter-paper-width = MVSETUP Geef papierbreedte op:
.mvsetup-enter-paper-height = MVSETUP Geef papierhoogte op:
.mvsetup-enter-option = MVSETUP Geef optie op [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Geef viewportindeling op [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Geef eerste hoek van het viewportgebied op <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Geef tegenoverliggende hoek op:
.mvsetup-viewports-in-x = MVSETUP Geef aantal viewports in X-richting op <2>:
.mvsetup-viewports-in-y = MVSETUP Geef aantal viewports in Y-richting op <2>:
.mvsetup-distance-in-x = MVSETUP Geef afstand tussen viewports in X-richting op <0>:
.mvsetup-distance-in-y = MVSETUP Geef afstand tussen viewports in Y-richting op <0>:
.mvsetup-select-viewports = MVSETUP Selecteer de te schalen viewports:
.mvsetup-paper-space-units = MVSETUP Geef aantal papierruimte-eenheden op <1>:
.mvsetup-model-space-units = MVSETUP Geef aantal modelruimte-eenheden op <1>:
.mvsetup-viewports-do-not-fit = MVSETUP De viewports passen niet in het gebied.
.scale-viewports-option = Viewports schalen
.active = Actief
.inactive = Inactief
.insert-view = Beeld invoegen
locales/pl-PL/opencadstudio.ftl
+19
View File
@@ -4423,6 +4423,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Wybierz obiekty do usunięcia:
.delete-objects-option = Usuń obiekty
.mvsetup-enable-paper-space = MVSETUP Włączyć obszar papieru? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Podaj współczynnik skali <1>:
.mvsetup-enter-paper-width = MVSETUP Podaj szerokość papieru:
.mvsetup-enter-paper-height = MVSETUP Podaj wysokość papieru:
.mvsetup-enter-option = MVSETUP Podaj opcję [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Podaj układ rzutni [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Określ pierwszy narożnik obszaru rzutni <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Określ przeciwległy narożnik:
.mvsetup-viewports-in-x = MVSETUP Podaj liczbę rzutni w kierunku X <2>:
.mvsetup-viewports-in-y = MVSETUP Podaj liczbę rzutni w kierunku Y <2>:
.mvsetup-distance-in-x = MVSETUP Określ odstęp między rzutniami w kierunku X <0>:
.mvsetup-distance-in-y = MVSETUP Określ odstęp między rzutniami w kierunku Y <0>:
.mvsetup-select-viewports = MVSETUP Wybierz rzutnie do skalowania:
.mvsetup-paper-space-units = MVSETUP Podaj liczbę jednostek obszaru papieru <1>:
.mvsetup-model-space-units = MVSETUP Podaj liczbę jednostek obszaru modelu <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Rzutnie nie mieszczą się w obszarze.
.scale-viewports-option = Skaluj rzutnie
.active = Aktywny
.inactive = Nieaktywny
.insert-view = Wstaw widok
locales/pt-BR/opencadstudio.ftl
+19
View File
@@ -4424,6 +4424,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Selecione os objetos a excluir:
.delete-objects-option = Excluir objetos
.mvsetup-enable-paper-space = MVSETUP Ativar espaço do papel? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Informe o fator de escala <1>:
.mvsetup-enter-paper-width = MVSETUP Informe a largura do papel:
.mvsetup-enter-paper-height = MVSETUP Informe a altura do papel:
.mvsetup-enter-option = MVSETUP Informe uma opção [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Informe o arranjo das janelas [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Especifique o primeiro canto da área das janelas <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Especifique o canto oposto:
.mvsetup-viewports-in-x = MVSETUP Informe o número de janelas na direção X <2>:
.mvsetup-viewports-in-y = MVSETUP Informe o número de janelas na direção Y <2>:
.mvsetup-distance-in-x = MVSETUP Especifique a distância entre janelas na direção X <0>:
.mvsetup-distance-in-y = MVSETUP Especifique a distância entre janelas na direção Y <0>:
.mvsetup-select-viewports = MVSETUP Selecione as janelas a escalar:
.mvsetup-paper-space-units = MVSETUP Informe o número de unidades do espaço do papel <1>:
.mvsetup-model-space-units = MVSETUP Informe o número de unidades do espaço do modelo <1>:
.mvsetup-viewports-do-not-fit = MVSETUP As janelas não cabem na área.
.scale-viewports-option = Escalar janelas
.active = Ativo
.inactive = Inativo
.insert-view = Inserir vista
locales/ru-RU/opencadstudio.ftl
+19
View File
@@ -4425,6 +4425,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP Выберите объекты для удаления:
.delete-objects-option = Удалить объекты
.mvsetup-enable-paper-space = MVSETUP Включить пространство листа? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Введите масштабный коэффициент <1>:
.mvsetup-enter-paper-width = MVSETUP Введите ширину листа:
.mvsetup-enter-paper-height = MVSETUP Введите высоту листа:
.mvsetup-enter-option = MVSETUP Задайте параметр [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Задайте компоновку видовых экранов [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Укажите первый угол области видовых экранов <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Укажите противоположный угол:
.mvsetup-viewports-in-x = MVSETUP Введите число видовых экранов по X <2>:
.mvsetup-viewports-in-y = MVSETUP Введите число видовых экранов по Y <2>:
.mvsetup-distance-in-x = MVSETUP Укажите расстояние между видовыми экранами по X <0>:
.mvsetup-distance-in-y = MVSETUP Укажите расстояние между видовыми экранами по Y <0>:
.mvsetup-select-viewports = MVSETUP Выберите видовые экраны для масштабирования:
.mvsetup-paper-space-units = MVSETUP Введите число единиц пространства листа <1>:
.mvsetup-model-space-units = MVSETUP Введите число единиц пространства модели <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Видовые экраны не помещаются в области.
.scale-viewports-option = Масштаб видовых экранов
.active = Включён
.inactive = неактивный
.insert-view = Включить вид
locales/tr-TR/opencadstudio.ftl
+19
View File
@@ -4382,6 +4382,25 @@ model =
.cube = Küp
layout =
.mvsetup-select-objects-to-delete = MVSETUP Silinecek nesneleri seçin:
.delete-objects-option = Nesneleri sil
.mvsetup-enable-paper-space = MVSETUP Kâğıt alanı etkinleştirilsin mi? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP Ölçek faktörünü girin <1>:
.mvsetup-enter-paper-width = MVSETUP Kâğıt genişliğini girin:
.mvsetup-enter-paper-height = MVSETUP Kâğıt yüksekliğini girin:
.mvsetup-enter-option = MVSETUP Seçenek girin [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP Görünüm penceresi düzenini girin [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP Görünüm pencereleri alanının ilk köşesini belirtin <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP Karşı köşeyi belirtin:
.mvsetup-viewports-in-x = MVSETUP X yönündeki görünüm penceresi sayısını girin <2>:
.mvsetup-viewports-in-y = MVSETUP Y yönündeki görünüm penceresi sayısını girin <2>:
.mvsetup-distance-in-x = MVSETUP X yönünde görünüm pencereleri arasındaki mesafeyi belirtin <0>:
.mvsetup-distance-in-y = MVSETUP Y yönünde görünüm pencereleri arasındaki mesafeyi belirtin <0>:
.mvsetup-select-viewports = MVSETUP Ölçeklenecek görünüm pencerelerini seçin:
.mvsetup-paper-space-units = MVSETUP Kâğıt alanı birim sayısını girin <1>:
.mvsetup-model-space-units = MVSETUP Model alanı birim sayısını girin <1>:
.mvsetup-viewports-do-not-fit = MVSETUP Görünüm pencereleri alana sığmıyor.
.scale-viewports-option = Görünüm pencerelerini ölçekle
.active = Etkin
.inactive = Etkin Değil
.insert-view = Görünüm Ekle
locales/zh-CN/opencadstudio.ftl
+19
View File
@@ -4407,6 +4407,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP 选择要删除的对象:
.delete-objects-option = 删除对象
.mvsetup-enable-paper-space = MVSETUP 启用图纸空间? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP 输入比例因子 <1>:
.mvsetup-enter-paper-width = MVSETUP 输入图纸宽度:
.mvsetup-enter-paper-height = MVSETUP 输入图纸高度:
.mvsetup-enter-option = MVSETUP 输入选项 [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP 输入视口布局 [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP 指定视口区域的第一个角点 <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP 指定对角点:
.mvsetup-viewports-in-x = MVSETUP 输入 X 方向的视口数 <2>:
.mvsetup-viewports-in-y = MVSETUP 输入 Y 方向的视口数 <2>:
.mvsetup-distance-in-x = MVSETUP 指定 X 方向的视口间距 <0>:
.mvsetup-distance-in-y = MVSETUP 指定 Y 方向的视口间距 <0>:
.mvsetup-select-viewports = MVSETUP 选择要缩放的视口:
.mvsetup-paper-space-units = MVSETUP 输入图纸空间单位数 <1>:
.mvsetup-model-space-units = MVSETUP 输入模型空间单位数 <1>:
.mvsetup-viewports-do-not-fit = MVSETUP 视口无法放入该区域。
.scale-viewports-option = 缩放视口
.active = 激活
.inactive = 不活动
.insert-view = 插入视图
locales/zh-TW/opencadstudio.ftl
+19
View File
@@ -4419,6 +4419,25 @@ model =
layout =
.mvsetup-select-objects-to-delete = MVSETUP 選擇要刪除的物件:
.delete-objects-option = 刪除物件
.mvsetup-enable-paper-space = MVSETUP 啟用圖紙空間? [No/Yes] <Y>:
.mvsetup-enter-scale-factor = MVSETUP 輸入比例係數 <1>:
.mvsetup-enter-paper-width = MVSETUP 輸入圖紙寬度:
.mvsetup-enter-paper-height = MVSETUP 輸入圖紙高度:
.mvsetup-enter-option = MVSETUP 輸入選項 [Create/Delete objects/Scale viewports]:
.mvsetup-enter-viewport-layout = MVSETUP 輸入視埠配置 [Single/Engineering/Array] <Single>:
.mvsetup-specify-first-corner = MVSETUP 指定視埠區域的第一個角點 <Sheet>:
.mvsetup-specify-opposite-corner = MVSETUP 指定對角點:
.mvsetup-viewports-in-x = MVSETUP 輸入 X 方向的視埠數 <2>:
.mvsetup-viewports-in-y = MVSETUP 輸入 Y 方向的視埠數 <2>:
.mvsetup-distance-in-x = MVSETUP 指定 X 方向的視埠間距 <0>:
.mvsetup-distance-in-y = MVSETUP 指定 Y 方向的視埠間距 <0>:
.mvsetup-select-viewports = MVSETUP 選擇要縮放的視埠:
.mvsetup-paper-space-units = MVSETUP 輸入圖紙空間單位數 <1>:
.mvsetup-model-space-units = MVSETUP 輸入模型空間單位數 <1>:
.mvsetup-viewports-do-not-fit = MVSETUP 視埠無法放入該區域。
.scale-viewports-option = 縮放視埠
.active = 激活
.inactive = 不活動
.insert-view = 插入視圖
src/app/command_driver/mod.rs
+7
View File
@@ -882,6 +882,13 @@ impl OpenCADStudio {
CmdResult::ZoomToWindow { p1, p2 } => {
self.handle_zoom_to_window(p1, p2);
}
CmdResult::CommitAndZoom { entity, p1, p2 } => {
self.handle_commit_entities_and_exit(vec![entity], false, false);
self.handle_zoom_to_window(p1, p2);
}
CmdResult::ScaleViewports { handles, factor } => {
self.handle_scale_viewports(handles, factor);
}
CmdResult::TwistView(twist) => {
self.handle_twist_view(twist);
}
src/app/command_driver/viewport.rs
+27
View File
@@ -447,6 +447,33 @@ impl OpenCADStudio {
.push_output(crate::t!("Zoom Window").as_ref());
}
/// MVSETUP Scale viewports: each picked layout viewport shows the model
/// at `factor` paper units per model unit. One undo step.
pub(in crate::app) fn handle_scale_viewports(&mut self, handles: Vec<Handle>, factor: f64) {
let i = self.active_tab;
self.tabs[i].active_cmd = None;
self.tabs[i].snap_result = None;
let handles: Vec<Handle> = handles
.into_iter()
.filter(|handle| {
matches!(
self.tabs[i].scene.document.get_entity(*handle),
Some(codec::EntityType::Viewport(viewport)) if viewport.id > 1
)
})
.collect();
if handles.is_empty() {
return;
}
self.push_undo_snapshot(i, "MVSETUP");
for handle in handles {
self.tabs[i]
.scene
.set_viewport_scale_factor_for(handle, factor);
}
self.tabs[i].dirty = true;
}
/// Turn the active view about its line of sight so the drawing shows
/// `twist` radians counter-clockwise from its untwisted orientation.
pub(in crate::app) fn handle_twist_view(&mut self, twist: f64) {
src/app/commands/view.rs
+28
View File
@@ -647,6 +647,34 @@ impl OpenCADStudio {
}
}
// MVSETUP — sheet border in model space, viewports on a layout.
"MVSETUP" => {
let scene = &mut self.tabs[i].scene;
let target = (scene.current_layout == "Model").then(|| {
scene
.layout_names()
.into_iter()
.find(|name| name != "Model")
.unwrap_or_else(|| "Layout1".to_string())
});
// The sheet MVSETUP lays viewports out on: the layout it
// switches to from model space, or the current one.
let current = target
.clone()
.map(|name| std::mem::replace(&mut scene.current_layout, name));
let paper_bounds = scene
.printable_area_limits()
.or_else(|| scene.paper_limits())
.unwrap_or(((0.0, 0.0), (297.0, 210.0)));
if let Some(current) = current {
scene.current_layout = current;
}
use crate::modules::layout::mvsetup::MvsetupCommand;
let command = MvsetupCommand::new(target, paper_bounds);
self.command_line.push_info(&command.prompt());
self.tabs[i].active_cmd = Some(Box::new(command));
}
// ── MSPACE / PSPACE ───────────────────────────────────────────
"MSPACE" => {
return Some(Task::done(Message::MspaceCommand));
src/app/update/viewport.rs
+2 -2
View File
@@ -6445,10 +6445,10 @@ properties={:.1}ms picked={}",
&& self.tabs[i]
.active_cmd
.as_ref()
.is_some_and(|command| command.name() == "MVIEW");
.is_some_and(|command| matches!(command.name(), "MVIEW" | "MVSETUP"));
if context_changed {
if preserve_active_command {
// MVIEW keeps its command-owned step data, but all host-owned
// MVIEW and MVSETUP keep their step data, but all host-owned
// cursor/snap/dynamic-input state belongs to the old space.
self.reset_space_interaction_state();
}
src/command.rs
+12
View File
@@ -1943,6 +1943,18 @@ pub enum CmdResult {
p1: DVec3,
p2: DVec3,
},
/// Commit `entity`, then zoom to the given corner points; end command.
CommitAndZoom {
entity: EntityType,
p1: DVec3,
p2: DVec3,
},
/// Scale the given layout viewports to `factor` paper units per model
/// unit; end command.
ScaleViewports {
handles: Vec<Handle>,
factor: f64,
},
/// Print a measurement result to the command line and end the command.
Measurement(String),
/// Print a measurement result and keep the command active.
src/locale_catalog.rs
+19
View File
@@ -2089,6 +2089,25 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
"MText" => Some(("common", "mtext")),
"MVIEW Specify corner of viewport or [Polygonal/Object/Fit/Insert view]:" => Some(("layout", "mview-specify-corner-of-viewport-or-polygonal")),
"MVIEW Specify opposite corner:" => Some(("layout", "mview-specify-opposite-corner")),
"MVSETUP Enable paper space? [No/Yes] <Y>:" => Some(("layout", "mvsetup-enable-paper-space")),
"MVSETUP Enter the scale factor <1>:" => Some(("layout", "mvsetup-enter-scale-factor")),
"MVSETUP Enter the paper width:" => Some(("layout", "mvsetup-enter-paper-width")),
"MVSETUP Enter the paper height:" => Some(("layout", "mvsetup-enter-paper-height")),
"MVSETUP Enter an option [Create/Delete objects/Scale viewports]:" => Some(("layout", "mvsetup-enter-option")),
"MVSETUP Select the objects to delete:" => Some(("layout", "mvsetup-select-objects-to-delete")),
"Delete objects" => Some(("layout", "delete-objects-option")),
"MVSETUP Enter viewport layout [Single/Engineering/Array] <Single>:" => Some(("layout", "mvsetup-enter-viewport-layout")),
"MVSETUP Specify first corner of bounding area for viewport(s) <Sheet>:" => Some(("layout", "mvsetup-specify-first-corner")),
"MVSETUP Specify opposite corner:" => Some(("layout", "mvsetup-specify-opposite-corner")),
"MVSETUP Enter number of viewports in X direction <2>:" => Some(("layout", "mvsetup-viewports-in-x")),
"MVSETUP Enter number of viewports in Y direction <2>:" => Some(("layout", "mvsetup-viewports-in-y")),
"MVSETUP Specify distance between viewports in X direction <0>:" => Some(("layout", "mvsetup-distance-in-x")),
"MVSETUP Specify distance between viewports in Y direction <0>:" => Some(("layout", "mvsetup-distance-in-y")),
"MVSETUP Select the viewports to scale:" => Some(("layout", "mvsetup-select-viewports")),
"MVSETUP Enter the number of paper space units <1>:" => Some(("layout", "mvsetup-paper-space-units")),
"MVSETUP Enter the number of model space units <1>:" => Some(("layout", "mvsetup-model-space-units")),
"MVSETUP The viewports do not fit in the bounding area." => Some(("layout", "mvsetup-viewports-do-not-fit")),
"Scale viewports" => Some(("layout", "scale-viewports-option")),
"MVIEW Insert view Choose a named view or [New]:" => Some(("layout", "mview-insert-view-choose-a-named-view-or-new")),
"MVIEW Insert view No named views; choose [New]:" => Some(("layout", "mview-insert-view-no-named-views-choose-new")),
"MVIEW Insert view Specify placement point:" => Some(("layout", "mview-insert-view-specify-placement-point")),
src/modules/layout/mod.rs
+1
View File
@@ -2,6 +2,7 @@
// This tab is only shown when the active layout is not "Model".
pub mod mview;
pub mod mvsetup;
pub mod vplayer;
use crate::modules::{CadModule, IconKind, ModuleEvent, RibbonGroup, ToolDef};
src/modules/layout/mvsetup.rs
+374
View File
@@ -0,0 +1,374 @@
// MVSETUP — set a drawing up for plotting.
//
// In model space without paper space it draws the sheet border at the
// drawing scale:
// Enable paper space? [No/Yes] <Y>:
// Enter the scale factor <1>:
// Enter the paper width:
// Enter the paper height:
// On a layout it lays out viewports or scales them:
// Enter an option [Create/Delete objects/Scale viewports]:
// Enter viewport layout [Single/Engineering/Array] <Single>:
// Specify first corner of bounding area for viewport(s) <Sheet>:
// Specify opposite corner:
// Enter number of viewports in X direction <2>: (Array)
// Enter number of viewports in Y direction <2>: (Array)
// Specify distance between viewports in X direction <0>:
// Specify distance between viewports in Y direction <0>:
// Select the objects to delete:
// Select the viewports to scale:
// Enter the number of paper space units <1>:
// Enter the number of model space units <1>:
use crate::t;
use codec::entities::{LwPolyline, LwVertex, Viewport};
use codec::types::{Vector2, Vector3};
use codec::{EntityType, Handle};
use glam::{DVec2, DVec3};
use crate::command::{CadCommand, CmdOption, CmdResult};
#[derive(Clone, Copy, PartialEq)]
enum Step {
PaperSpace,
Scale,
Width,
Height,
Option,
Arrangement,
FirstCorner,
SecondCorner,
Columns,
Rows,
GapX,
GapY,
Delete,
Viewports,
PaperUnits,
ModelUnits,
}
#[derive(Clone, Copy, PartialEq)]
enum Arrangement {
Single,
Engineering,
Array,
}
pub struct MvsetupCommand {
step: Step,
/// The layout model space switches to when paper space is enabled.
layout: String,
paper_bounds: ((f64, f64), (f64, f64)),
scale: f64,
width: f64,
arrangement: Arrangement,
first: DVec2,
area: (DVec2, DVec2),
columns: u32,
rows: u32,
gap_x: f64,
picked: Vec<Handle>,
paper_units: f64,
}
impl MvsetupCommand {
/// `layout` is `None` on a layout, or the layout to switch to from model
/// space; `paper_bounds` is the sheet's printable area.
pub fn new(layout: Option<String>, paper_bounds: ((f64, f64), (f64, f64))) -> Self {
Self {
step: if layout.is_some() {
Step::PaperSpace
} else {
Step::Option
},
layout: layout.unwrap_or_default(),
paper_bounds,
scale: 1.0,
width: 0.0,
arrangement: Arrangement::Single,
first: DVec2::ZERO,
area: (DVec2::ZERO, DVec2::ZERO),
columns: 2,
rows: 2,
gap_x: 0.0,
picked: Vec::new(),
paper_units: 1.0,
}
}
fn after_area(&mut self) -> CmdResult {
self.step = match self.arrangement {
Arrangement::Single => return self.create(0.0),
Arrangement::Engineering => Step::GapX,
Arrangement::Array => Step::Columns,
};
CmdResult::NeedPoint
}
/// The viewports of the chosen arrangement, `gap_y` apart vertically.
fn create(&self, gap_y: f64) -> CmdResult {
let (columns, rows, gap_x) = match self.arrangement {
Arrangement::Single => (1, 1, 0.0),
Arrangement::Engineering => (2, 2, self.gap_x),
Arrangement::Array => (self.columns, self.rows, self.gap_x),
};
let (min, max) = self.area;
let width = (max.x - min.x - gap_x * (columns - 1) as f64) / columns as f64;
let height = (max.y - min.y - gap_y * (rows - 1) as f64) / rows as f64;
if width <= 1e-6 || height <= 1e-6 {
return CmdResult::ReportError(
t!("MVSETUP The viewports do not fit in the bounding area.").into_owned(),
);
}
// Engineering: top view over front view, right view beside it, and
// an isometric view in the remaining corner.
let directions = [
Vector3::new(0.0, 0.0, 1.0),
Vector3::new(1.0, -1.0, 1.0),
Vector3::new(0.0, -1.0, 0.0),
Vector3::new(1.0, 0.0, 0.0),
];
let mut viewports = Vec::new();
for row in 0..rows {
for column in 0..columns {
let mut viewport = Viewport::new();
viewport.center = Vector3::new(
min.x + column as f64 * (width + gap_x) + width / 2.0,
max.y - row as f64 * (height + gap_y) - height / 2.0,
0.0,
);
viewport.width = width;
viewport.height = height;
viewport.id = 2;
if self.arrangement == Arrangement::Engineering {
viewport.view_direction = directions[(row * 2 + column) as usize].clone();
}
viewports.push(EntityType::Viewport(viewport));
}
}
CmdResult::CommitEntitiesAndExit(viewports)
}
fn sheet_border(&self, height: f64) -> CmdResult {
let (width, height) = (self.width * self.scale, height * self.scale);
let mut border = LwPolyline::new();
border.is_closed = true;
border.vertices = [(0.0, 0.0), (width, 0.0), (width, height), (0.0, height)]
.into_iter()
.map(|(x, y)| LwVertex::new(Vector2::new(x, y)))
.collect();
CmdResult::CommitAndZoom {
entity: EntityType::LwPolyline(border),
p1: DVec3::ZERO,
p2: DVec3::new(width, height, 0.0),
}
}
}
/// A positive number, or `default` for an empty answer.
fn positive(text: &str, default: f64) -> Option<f64> {
if text.is_empty() {
return Some(default);
}
crate::entities::common::parse_typed_length(text).filter(|value| *value > 0.0)
}
impl CadCommand for MvsetupCommand {
fn name(&self) -> &'static str {
"MVSETUP"
}
fn prompt(&self) -> String {
t!(match self.step {
Step::PaperSpace => "MVSETUP Enable paper space? [No/Yes] <Y>:",
Step::Scale => "MVSETUP Enter the scale factor <1>:",
Step::Width => "MVSETUP Enter the paper width:",
Step::Height => "MVSETUP Enter the paper height:",
Step::Option => "MVSETUP Enter an option [Create/Delete objects/Scale viewports]:",
Step::Arrangement => {
"MVSETUP Enter viewport layout [Single/Engineering/Array] <Single>:"
}
Step::FirstCorner => {
"MVSETUP Specify first corner of bounding area for viewport(s) <Sheet>:"
}
Step::SecondCorner => "MVSETUP Specify opposite corner:",
Step::Columns => "MVSETUP Enter number of viewports in X direction <2>:",
Step::Rows => "MVSETUP Enter number of viewports in Y direction <2>:",
Step::GapX => "MVSETUP Specify distance between viewports in X direction <0>:",
Step::GapY => "MVSETUP Specify distance between viewports in Y direction <0>:",
Step::Delete => "MVSETUP Select the objects to delete:",
Step::Viewports => "MVSETUP Select the viewports to scale:",
Step::PaperUnits => "MVSETUP Enter the number of paper space units <1>:",
Step::ModelUnits => "MVSETUP Enter the number of model space units <1>:",
})
.into_owned()
}
fn options(&self) -> Vec<CmdOption> {
match self.step {
Step::PaperSpace => vec![CmdOption::new("No", "N"), CmdOption::new("Yes", "Y")],
Step::Option => vec![
CmdOption::new("Create", "C"),
CmdOption::new("Delete objects", "D"),
CmdOption::new("Scale viewports", "S"),
],
Step::Arrangement => vec![
CmdOption::new("Single", "S"),
CmdOption::new("Engineering", "E"),
CmdOption::new("Array", "A"),
],
_ => Vec::new(),
}
}
fn wants_text_input(&self) -> bool {
!matches!(self.step, Step::Delete | Step::Viewports)
}
fn needs_entity_pick(&self) -> bool {
matches!(self.step, Step::Delete | Step::Viewports)
}
fn entity_pick_highlights_hover(&self) -> bool {
true
}
fn on_entity_pick(&mut self, handle: Handle, _pt: DVec3) -> CmdResult {
if !handle.is_null() && !self.picked.contains(&handle) {
self.picked.push(handle);
}
CmdResult::NeedPoint
}
fn on_text_input(&mut self, text: &str) -> Option<CmdResult> {
let text = text.trim();
let word = text.trim_start_matches('_').to_ascii_uppercase();
match self.step {
Step::PaperSpace => match word.as_str() {
"N" | "NO" => self.step = Step::Scale,
"" | "Y" | "YES" => {
self.step = Step::Option;
return Some(CmdResult::MviewSwitchLayout(self.layout.clone()));
}
_ => return None,
},
Step::Scale => {
self.scale = positive(text, 1.0)?;
self.step = Step::Width;
}
Step::Width => {
self.width = positive(text, f64::NAN).filter(|value| value.is_finite())?;
self.step = Step::Height;
}
Step::Height => {
let height = positive(text, f64::NAN).filter(|value| value.is_finite())?;
return Some(self.sheet_border(height));
}
Step::Option => match word.as_str() {
"C" | "CREATE" => self.step = Step::Arrangement,
"D" | "DELETE" => self.step = Step::Delete,
"S" | "SCALE" => self.step = Step::Viewports,
_ => return None,
},
Step::Arrangement => {
self.arrangement = match word.as_str() {
"" | "S" | "SINGLE" | "1" => Arrangement::Single,
"E" | "ENGINEERING" | "2" => Arrangement::Engineering,
"A" | "ARRAY" | "3" => Arrangement::Array,
_ => return None,
};
self.step = Step::FirstCorner;
}
Step::FirstCorner if text.is_empty() => {
let ((x0, y0), (x1, y1)) = self.paper_bounds;
self.area = (
DVec2::new(x0.min(x1), y0.min(y1)),
DVec2::new(x0.max(x1), y0.max(y1)),
);
return Some(self.after_area());
}
Step::Columns | Step::Rows => {
let count = if text.is_empty() {
2
} else {
text.parse::<u32>().ok().filter(|count| (1..=100).contains(count))?
};
if self.step == Step::Columns {
self.columns = count;
self.step = Step::Rows;
} else {
self.rows = count;
self.step = Step::GapX;
}
}
Step::GapX | Step::GapY => {
let gap = if text.is_empty() {
0.0
} else {
crate::entities::common::parse_typed_length(text).filter(|v| *v >= 0.0)?
};
if self.step == Step::GapY {
return Some(self.create(gap));
}
self.gap_x = gap;
self.step = Step::GapY;
}
Step::PaperUnits => {
self.paper_units = positive(text, 1.0)?;
self.step = Step::ModelUnits;
}
Step::ModelUnits => {
let model_units = positive(text, 1.0)?;
return Some(CmdResult::ScaleViewports {
handles: std::mem::take(&mut self.picked),
factor: self.paper_units / model_units,
});
}
Step::FirstCorner | Step::SecondCorner | Step::Delete | Step::Viewports => {
return None
}
}
Some(CmdResult::NeedPoint)
}
fn on_point(&mut self, pt: DVec3) -> CmdResult {
match self.step {
Step::FirstCorner => {
self.first = pt.truncate();
self.step = Step::SecondCorner;
CmdResult::NeedPoint
}
Step::SecondCorner => {
let second = pt.truncate();
self.area = (self.first.min(second), self.first.max(second));
self.after_area()
}
_ => CmdResult::NeedPoint,
}
}
fn on_enter(&mut self) -> CmdResult {
match self.step {
Step::Delete => {
self.step = Step::Option;
let erased = std::mem::take(&mut self.picked);
if erased.is_empty() {
return CmdResult::NeedPoint;
}
CmdResult::ReplaceManyContinue(
erased.into_iter().map(|handle| (handle, Vec::new())).collect(),
)
}
Step::Viewports if self.picked.is_empty() => CmdResult::Cancel,
Step::Viewports => {
self.step = Step::PaperUnits;
CmdResult::NeedPoint
}
Step::Option | Step::Width | Step::Height | Step::SecondCorner => CmdResult::Cancel,
_ => self.on_text_input("").unwrap_or(CmdResult::NeedPoint),
}
}
}
inventory::submit!(crate::command::CommandRegistration { names: &["MVSETUP"] });
src/scene/mod.rs
+41 -8
View File
@@ -6656,6 +6656,12 @@ impl Scene {
let Some(viewport) = self.explicit_viewport_handle() else {
return false;
};
self.set_viewport_scale_factor_for(viewport, factor)
}
/// Scale `viewport` to `factor` paper units per model unit, as
/// [`Self::set_viewport_scale_factor`] does for the active one.
pub fn set_viewport_scale_factor_for(&mut self, viewport: Handle, factor: f64) -> bool {
let unit_factor = self.annotation_scale_unit_factor();
let named = self
.document
@@ -12990,22 +12996,49 @@ vis_index={:.1} visible_probe={:.1}",
Some(e) => e,
None => return,
};
let (min, max) = (min.as_dvec3(), max.as_dvec3());
let center = (min + max) * 0.5;
let content_w = (max.x - min.x).max(1e-3);
let content_h = (max.y - min.y).max(1e-3);
let vp = match self.document.get_entity_mut(vp_handle) {
Some(codec::EntityType::Viewport(vp)) => vp,
_ => return,
};
// Set the view target to the model-space centroid (XY plane, z=0).
vp.view_target.x = center.x as f64;
vp.view_target.y = center.y as f64;
vp.view_target.z = 0.0;
let direction = glam::DVec3::new(
vp.view_direction.x,
vp.view_direction.y,
vp.view_direction.z,
)
.normalize_or(glam::DVec3::Z);
// The extents box as seen along the view direction: its span across
// the view's right and up axes. Looking down Z that is its X/Y size.
let right = glam::DVec3::Z.cross(direction).normalize_or(glam::DVec3::X);
let up = direction.cross(right);
let (mut span_right, mut span_up) = ((f64::MAX, f64::MIN), (f64::MAX, f64::MIN));
for corner in 0..8 {
let point = glam::DVec3::new(
if corner & 1 == 0 { min.x } else { max.x },
if corner & 2 == 0 { min.y } else { max.y },
if corner & 4 == 0 { min.z } else { max.z },
);
let (along_right, along_up) = (point.dot(right), point.dot(up));
span_right = (span_right.0.min(along_right), span_right.1.max(along_right));
span_up = (span_up.0.min(along_up), span_up.1.max(along_up));
}
let content_w = (span_right.1 - span_right.0).max(1e-3);
let content_h = (span_up.1 - span_up.0).max(1e-3);
// Aim at the model's centre; a plan view keeps it on the XY plane.
vp.view_target.x = center.x;
vp.view_target.y = center.y;
vp.view_target.z = if direction == glam::DVec3::Z {
0.0
} else {
center.z
};
// Choose the scale that fits both dimensions with the margin.
let scale_w = vp.width / (content_w as f64 * margin);
let scale_h = vp.height / (content_h as f64 * margin);
let scale_w = vp.width / (content_w * margin);
let scale_h = vp.height / (content_h * margin);
let fit_scale = scale_w.min(scale_h).min(1000.0).max(1e-6);
vp.custom_scale = fit_scale;