feat(array): ARRAYEDIT Source edits what an associative array repeats

ARRAYEDIT picks an associative array (or takes the preselected one) and
its Source option opens the objects every item repeats in the Block
Editor; saving there updates all items at once. Counts and spacings stay
in Properties.

Refs #1109

Co-Authored-By: Claude Opus 5.5 <[email protected]>

locales/ar-SA/opencadstudio.ftl

@@ -3134,6 +3134,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  حدد كتلة ذات سمات:
     .annotation-object-scale = مقياس كائن التعليق التوضيحي
     .bedit-select-block-reference-to-edit = BEDIT  حدد مرجع الكتلة لتحريره:
+    .arrayedit-select-array = ARRAYEDIT  حدد المصفوفة:
+    .arrayedit-options = ARRAYEDIT  أدخل خيارًا [المصدر/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: الكائن المحدد ليس مصفوفة ترابطية.
     .blend-enter-continuity-tangent-curvature-c = BLEND  أدخل الاستمرارية [مماس/انحناء] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  حدد المنحنى المفتوح الأول [الاستمرارية=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  حدد المنحنى المفتوح الثاني [الاستمرارية=__ocs_arg_c__]:

locales/bg-BG/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Избери блок с атрибути:
     .annotation-object-scale = Мащаб на анотационен обект
     .bedit-select-block-reference-to-edit = BEDIT  Избери препратка към блок за редактиране:
+    .arrayedit-select-array = ARRAYEDIT  Изберете масив:
+    .arrayedit-options = ARRAYEDIT  Въведете опция [Източник/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: избраният обект не е асоциативен масив.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Въведи непрекъснатост [Допирателност/Кривина] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Избери първа отворена крива  [Непрекъснатост=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Избери втора отворена крива  [Непрекъснатост=__ocs_arg_c__]:

locales/cs-CZ/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Vyberte blok s atributy:
     .annotation-object-scale = Měřítko objektu anotace
     .bedit-select-block-reference-to-edit = BEDIT Vyberte referenci bloku, kterou chcete upravit:
+    .arrayedit-select-array = ARRAYEDIT  Vyberte pole:
+    .arrayedit-options = ARRAYEDIT  Zadejte možnost [Zdroj/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: vybraný objekt není asociativní pole.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter spojitost [Tečna/Zakřivení] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Vyberte první otevřenou křivku [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Vyberte druhou otevřenou křivku [Continuity=__ocs_arg_c__]:

locales/de-DE/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Block mit Attributen auswählen:
     .annotation-object-scale = Beschriftungsobjektmaßstab
     .bedit-select-block-reference-to-edit = BEDIT Blockreferenz zum Bearbeiten auswählen:
+    .arrayedit-select-array = ARRAYEDIT  Reihe wählen:
+    .arrayedit-options = ARRAYEDIT  Option eingeben [Quelle/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: das gewählte Objekt ist keine assoziative Reihe.
     .blend-enter-continuity-tangent-curvature-c = BLEND Geben Sie Kontinuität ein [Tangente/Krümmung] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Erste offene Kurve auswählen [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND zweite offene Kurve auswählen [Continuity=__ocs_arg_c__]:

locales/el-GR/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Επιλέξτε μπλοκ με χαρακτηριστικά:
     .annotation-object-scale = Κλίμακα αντικειμένου επισημείωσης
     .bedit-select-block-reference-to-edit = BEDIT  Επιλέξτε αναφορά μπλοκ προς επεξεργασία:
+    .arrayedit-select-array = ARRAYEDIT  Επιλέξτε διάταξη:
+    .arrayedit-options = ARRAYEDIT  Δώστε επιλογή [Πηγή/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: το επιλεγμένο αντικείμενο δεν είναι συσχετιστική διάταξη.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Δώστε συνέχεια [Εφαπτομενική/Καμπυλότητα] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Επιλέξτε πρώτη ανοικτή καμπύλη  [Συνέχεια=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Επιλέξτε δεύτερη ανοικτή καμπύλη  [Συνέχεια=__ocs_arg_c__]:

locales/en-US/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Select block with attributes:
     .annotation-object-scale = Annotation Object Scale
     .bedit-select-block-reference-to-edit = BEDIT  Select block reference to edit:
+    .arrayedit-select-array = ARRAYEDIT  Select array:
+    .arrayedit-options = ARRAYEDIT  Enter an option [Source/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: the selected object is not an associative array.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Enter continuity [Tangent/Curvature] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Select first open curve  [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Select second open curve  [Continuity=__ocs_arg_c__]:

locales/es-ES/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Seleccione un bloque con atributos:
     .annotation-object-scale = Escala del objeto anotativo
     .bedit-select-block-reference-to-edit = BEDIT  Seleccione la referencia de bloque que desea editar:
+    .arrayedit-select-array = ARRAYEDIT  Seleccione la matriz:
+    .arrayedit-options = ARRAYEDIT  Indique una opción [Origen/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: el objeto seleccionado no es una matriz asociativa.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Indique la continuidad [Tangente/Curvatura] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Seleccione la primera curva abierta [Continuidad=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Seleccione la segunda curva abierta [Continuidad=__ocs_arg_c__]:

locales/fi-FI/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Valitse lohko määritteillä:
     .annotation-object-scale = Merkintäobjektin mittakaava
     .bedit-select-block-reference-to-edit = BEDIT Valitse muokattava lohkoviite:
+    .arrayedit-select-array = ARRAYEDIT  Valitse sarja:
+    .arrayedit-options = ARRAYEDIT  Anna vaihtoehto [Lähde/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: valittu objekti ei ole assosiatiivinen sarja.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter jatkuvuus [tangentti/kaarevuus] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Valitse ensimmäinen avoin käyrä [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Valitse toinen avoin käyrä [Continuity=__ocs_arg_c__]:

locales/fr-FR/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Sélectionner un bloc avec des attributs :
     .annotation-object-scale = Échelle d'objets d'annotation
     .bedit-select-block-reference-to-edit = BEDIT Sélectionnez la référence de bloc à modifier :
+    .arrayedit-select-array = ARRAYEDIT  Sélectionnez le réseau :
+    .arrayedit-options = ARRAYEDIT  Entrez une option [Source/eXit] <eXit> :
+    .arrayedit-not-an-array = ARRAYEDIT : l'objet sélectionné n'est pas un réseau associatif.
     .blend-enter-continuity-tangent-curvature-c = BLEND Entrer la continuité [Tangent/Curvature] <__ocs_arg_c__:
     .blend-select-first-open-curve-continuity-c = BLEND Sélectionner la première courbe ouverte [Continuité=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Sélectionner la deuxième courbe ouverte [Continuité=__ocs_arg_c__]:

locales/hi-IN/opencadstudio.ftl

@@ -3110,6 +3110,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT विशेषताओं के साथ ब्लॉक का चयन करें:
     .annotation-object-scale = Annotation ऑब्जेक्ट स्केल
     .bedit-select-block-reference-to-edit = BEDIT संपादित करने के लिए ब्लॉक संदर्भ का चयन करें:
+    .arrayedit-select-array = ARRAYEDIT  ऐरे चुनें:
+    .arrayedit-options = ARRAYEDIT  विकल्प दर्ज करें [स्रोत/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: चुना गया ऑब्जेक्ट सहयोगी ऐरे नहीं है।
     .blend-enter-continuity-tangent-curvature-c = BLEND  निरंतरता चुनें [स्पर्शरेखा/वक्रता] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND प्रथम खुले वक्र का चयन करें [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND दूसरा खुला वक्र चुनें [Continuity=__ocs_arg_c__]:

locales/hu-HU/opencadstudio.ftl

@@ -3124,6 +3124,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Blokk kiválasztása attribútumokkal:
     .annotation-object-scale = Feliratozási objektum léptéke
     .bedit-select-block-reference-to-edit = BEDIT Válassza ki a szerkeszteni kívánt blokkreferenciát:
+    .arrayedit-select-array = ARRAYEDIT  Válassza ki a tömböt:
+    .arrayedit-options = ARRAYEDIT  Adjon meg egy lehetőséget [Forrás/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: a kijelölt objektum nem asszociatív tömb.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Adja meg a folytonosságot [Tangent/Curvature] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Válassza ki az első nyitott görbét [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Válassza ki a második nyitott görbét [Continuity=__ocs_arg_c__]:

locales/it-IT/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Seleziona blocco con attributi:
     .annotation-object-scale = Scala oggetto annotazione
     .bedit-select-block-reference-to-edit = BEDIT Selezionare il riferimento di blocco da modificare:
+    .arrayedit-select-array = ARRAYEDIT  Selezionare la serie:
+    .arrayedit-options = ARRAYEDIT  Immettere un'opzione [Origine/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: l'oggetto selezionato non è una serie associativa.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter continuità [Tangente/Curvatura] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Selezionare la prima curva aperta [Continuità=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Selezionare la seconda curva aperta [Continuità=__ocs_arg_c__]:

locales/ja-JP/opencadstudio.ftl

@@ -3112,6 +3112,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  属性付きブロックを選択:
     .annotation-object-scale = 注釈オブジェクト尺度
     .bedit-select-block-reference-to-edit = BEDIT  編集するブロック参照を選択:
+    .arrayedit-select-array = ARRAYEDIT  配列複写を選択:
+    .arrayedit-options = ARRAYEDIT  オプションを入力 [元/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 選択したオブジェクトは自動調整配列複写ではありません。
     .blend-enter-continuity-tangent-curvature-c = BLEND  連続性を入力 [接線/曲率] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  1 本目の開いた曲線を選択 [連続性=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  2 本目の開いた曲線を選択 [連続性=__ocs_arg_c__]:

locales/ko-KR/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT 속성이 있는 블록 선택:
     .annotation-object-scale = 주석 객체 축척
     .bedit-select-block-reference-to-edit = BEDIT 편집할 블록 참조 선택:
+    .arrayedit-select-array = ARRAYEDIT  배열 선택:
+    .arrayedit-options = ARRAYEDIT  옵션 입력 [원본/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 선택한 객체는 연관 배열이 아닙니다.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter 연속성 [접선/곡률] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND 첫 번째 열린 곡선 선택 [연속성=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND 두 번째 열린 곡선 선택 [연속성=__ocs_arg_c__]:

locales/lo-LA/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  ເລືອກບລັອກທີ່ມີຄຸນລັກສະນະ:
     .annotation-object-scale = ມາດຕາສ່ວນວັດຖຸຄຳອະທິບາຍ
     .bedit-select-block-reference-to-edit = BEDIT  ເລືອກການອ້າງອີງບລັອກທີ່ຈະແກ້ໄຂ:
+    .arrayedit-select-array = ARRAYEDIT  ເລືອກອາເຣ:
+    .arrayedit-options = ARRAYEDIT  ປ້ອນທາງເລືອກ [ແຫຼ່ງ/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: ວັດຖຸທີ່ເລືອກບໍ່ແມ່ນອາເຣທີ່ເຊື່ອມໂຍງ.
     .blend-enter-continuity-tangent-curvature-c = BLEND  ປ້ອນຄວາມຕໍ່ເນື່ອງ [Tangent/Curvature] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  ເລືອກເສັ້ນໂຄ້ງປາຍເປີດທຳອິດ  [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  ເລືອກເສັ້ນໂຄ້ງປາຍເປີດທີສອງ  [Continuity=__ocs_arg_c__]:

locales/nl-NL/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Selecteer symbool met attributen:
     .annotation-object-scale = Annotatie objectschaal
     .bedit-select-block-reference-to-edit = BEDIT Selecteer symboolverwijzing naar bewerken:
+    .arrayedit-select-array = ARRAYEDIT  Selecteer de reeks:
+    .arrayedit-options = ARRAYEDIT  Geef een optie [Bron/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: het geselecteerde object is geen associatieve reeks.
     .blend-enter-continuity-tangent-curvature-c = BLEND Vul continuïteit [tangent/curvature] <__ocs_arg_c__> in:
     .blend-select-first-open-curve-continuity-c = BLEND Selecteer eerste open curve [Continuïteit=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Selecteer tweede open curve [Continuïteit=__ocs_arg_c__]:

locales/pl-PL/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Wybierz blok z atrybutami:
     .annotation-object-scale = Skala obiektu adnotacji
     .bedit-select-block-reference-to-edit = BEDIT Wybierz odniesienie do bloku do edycji:
+    .arrayedit-select-array = ARRAYEDIT  Wybierz szyk:
+    .arrayedit-options = ARRAYEDIT  Podaj opcję [Źródło/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: wybrany obiekt nie jest szykiem skojarzonym.
     .blend-enter-continuity-tangent-curvature-c = BLEND Enter ciągłość [styczna/krzywizna] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Wybierz pierwszą otwartą krzywą [Continuity=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Wybierz drugą otwartą krzywą [Continuity=__ocs_arg_c__]:

locales/pt-BR/opencadstudio.ftl

@@ -3122,6 +3122,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Selecione um bloco com atributos:
     .annotation-object-scale = Escala de objeto de anotação
     .bedit-select-block-reference-to-edit = BEDIT  Selecione a referência de bloco a editar:
+    .arrayedit-select-array = ARRAYEDIT  Selecione o arranjo:
+    .arrayedit-options = ARRAYEDIT  Digite uma opção [Origem/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: o objeto selecionado não é um arranjo associativo.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Insira a continuidade [Tangente/Curvatura] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  Selecione a primeira curva aberta [Continuidade=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  Selecione a segunda curva aberta [Continuidade=__ocs_arg_c__]:

locales/ru-RU/opencadstudio.ftl

@@ -3125,6 +3125,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT Выберите блок с атрибутами:
     .annotation-object-scale = Масштаб аннотативного объекта
     .bedit-select-block-reference-to-edit = BEDIT Выберите ссылку на блок для редактирования:
+    .arrayedit-select-array = ARRAYEDIT  Выберите массив:
+    .arrayedit-options = ARRAYEDIT  Введите параметр [Исходные/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: выбранный объект не является ассоциативным массивом.
     .blend-enter-continuity-tangent-curvature-c = BLEND Введите непрерывность [Тангент/Курватура] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND Выберите первую открытую кривую [Продолжение=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND Выберите вторую открытую кривую [Продолжение=__ocs_arg_c__]:

locales/tr-TR/opencadstudio.ftl

@@ -3103,6 +3103,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  Öznitelikleri olan bir blok seçin:
     .annotation-object-scale = Açıklama Nesnesi Ölçeği
     .bedit-select-block-reference-to-edit = BEDIT  Düzenlenecek blok referansını seçin:
+    .arrayedit-select-array = ARRAYEDIT  Diziyi seçin:
+    .arrayedit-options = ARRAYEDIT  Bir seçenek girin [Kaynak/çıKış] <çıKış>:
+    .arrayedit-not-an-array = ARRAYEDIT: seçilen nesne ilişkili bir dizi değil.
     .blend-enter-continuity-tangent-curvature-c = BLEND  Sürekliliği girin [Teğet/Eğrilik] <__ocs_arg_c__>:
     .blend-select-first-open-curve-continuity-c = BLEND  İlk açık eğriyi seçin [Süreklilik=__ocs_arg_c__]:
     .blend-select-second-open-curve-continuity-c = BLEND  İkinci açık eğriyi seçin [Süreklilik=__ocs_arg_c__]:

locales/zh-CN/opencadstudio.ftl

@@ -3109,6 +3109,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  选择带属性的块：
     .annotation-object-scale = 注释对象比例
     .bedit-select-block-reference-to-edit = BEDIT 选择要编辑的块引用 :
+    .arrayedit-select-array = ARRAYEDIT  选择阵列:
+    .arrayedit-options = ARRAYEDIT  输入选项 [源/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 所选对象不是关联阵列。
     .blend-enter-continuity-tangent-curvature-c = BLEND  输入连续性 [相切/曲率] <__ocs_arg_c__>：
     .blend-select-first-open-curve-continuity-c = BLEND  选择第一条开放曲线  [Continuity=__ocs_arg_c__]：
     .blend-select-second-open-curve-continuity-c = BLEND  选择第二条开放曲线  [Continuity=__ocs_arg_c__]：

locales/zh-TW/opencadstudio.ftl

@@ -3121,6 +3121,9 @@ modify =
     .attedit-select-block-with-attributes = ATTEDIT  選擇帶屬性的圖塊：
     .annotation-object-scale = 註解物件比例
     .bedit-select-block-reference-to-edit = BEDIT 選擇要編輯的圖塊引用 :
+    .arrayedit-select-array = ARRAYEDIT  選取陣列:
+    .arrayedit-options = ARRAYEDIT  輸入選項 [來源/eXit] <eXit>:
+    .arrayedit-not-an-array = ARRAYEDIT: 選取的物件不是關聯式陣列。
     .blend-enter-continuity-tangent-curvature-c = BLEND  輸入連續性 [相切/曲率] <__ocs_arg_c__>：
     .blend-select-first-open-curve-continuity-c = BLEND  選擇第一條開放曲線  [Continuity=__ocs_arg_c__]：
     .blend-select-second-open-curve-continuity-c = BLEND  選擇第二條開放曲線  [Continuity=__ocs_arg_c__]：

src/app/commands/blocks.rs

@@ -301,6 +301,45 @@ impl OpenCADStudio {
                 }
             }
 
+            // ARRAYEDIT — edit an associative array; a preselected one skips
+            // the pick.
+            "ARRAYEDIT" => {
+                use crate::modules::draw::modify::arrayedit::ArrayEditCommand;
+                let selected = self.tabs[i].scene.selected_handles_in_order();
+                let array = match selected.as_slice() {
+                    [handle] => Some(*handle),
+                    _ => None,
+                };
+                self.tabs[i].scene.deselect_all();
+                let command = ArrayEditCommand::new(array);
+                self.command_line.push_info(&command.prompt());
+                self.tabs[i].active_cmd = Some(Box::new(command));
+            }
+
+            // ARRAYEDIT Source: edit the objects the array repeats in the
+            // Block Editor; every item follows when it is saved.
+            cmd if cmd.starts_with("ARRAYEDIT_SOURCE:") => {
+                let handle = codec::Handle::new(
+                    cmd["ARRAYEDIT_SOURCE:".len()..].parse().unwrap_or(0),
+                );
+                let document = &self.tabs[i].scene.document;
+                let source = crate::scene::assoc_array::array_of_insert(document, handle)
+                    .and_then(|array| {
+                        document
+                            .block_records
+                            .iter()
+                            .find(|record| record.handle == array.source_block)
+                            .map(|record| record.name.clone())
+                    });
+                match source {
+                    Some(name) => return Some(self.dispatch_command(&format!("BEDIT_OPEN:{name}"))),
+                    None => self.command_line.push_error(
+                        crate::t!("ARRAYEDIT: the selected object is not an associative array.")
+                            .as_ref(),
+                    ),
+                }
+            }
+
             // PASTESPEC — offer the copied objects now; the system clipboard's
             // text joins the formats once read (Message::PasteSpecial).
             "PASTESPEC" => {

src/locale_catalog.rs

@@ -802,6 +802,9 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "BACKGROUND  colour [Default/Black/DarkGray/Gray/LightGray/White] or R G B (0–255):" => Some(("file", "background-colour-default-black-darkgray-gray")),
         "BASE  Specify base point:" => Some(("insert", "base-specify-base-point")),
         "BEDIT  Select block reference to edit:" => Some(("modify", "bedit-select-block-reference-to-edit")),
+        "ARRAYEDIT  Select array:" => Some(("modify", "arrayedit-select-array")),
+        "ARRAYEDIT  Enter an option [Source/eXit] <eXit>:" => Some(("modify", "arrayedit-options")),
+        "ARRAYEDIT: the selected object is not an associative array." => Some(("modify", "arrayedit-not-an-array")),
         "BEDIT: Block \"{}\" edit discarded." => Some(("inquiry", "bedit-block-edit-discarded")),
         "BEDIT: Block \"{}\" saved. All references updated." => Some(("inquiry", "bedit-block-saved-all-references-updated")),
         "BEDIT: Editing block \"{}\". Use Save Block or Discard to finish." => Some(("inquiry", "bedit-editing-block-use-save-block-or-discard")),

src/modules/draw/modify/arrayedit.rs

@@ -0,0 +1,78 @@
+// ARRAYEDIT — edit an associative array. Counts and spacings are edited in
+// Properties; Source opens the objects every item repeats in the Block
+// Editor, and closing it updates all items at once.
+
+use crate::command::{CadCommand, CmdOption, CmdResult};
+use codec::Handle;
+use glam::DVec3;
+
+pub struct ArrayEditCommand {
+    array: Option<Handle>,
+}
+
+impl ArrayEditCommand {
+    pub fn new(array: Option<Handle>) -> Self {
+        Self { array }
+    }
+}
+
+impl CadCommand for ArrayEditCommand {
+    fn name(&self) -> &'static str {
+        "ARRAYEDIT"
+    }
+
+    fn prompt(&self) -> String {
+        match self.array {
+            None => crate::t!("ARRAYEDIT  Select array:").into_owned(),
+            Some(_) => crate::t!("ARRAYEDIT  Enter an option [Source/eXit] <eXit>:").into_owned(),
+        }
+    }
+
+    fn options(&self) -> Vec<CmdOption> {
+        match self.array {
+            None => Vec::new(),
+            Some(_) => vec![
+                CmdOption::new(crate::t!("Source").as_ref(), "S"),
+                CmdOption::new(crate::t!("eXit").as_ref(), "X"),
+            ],
+        }
+    }
+
+    fn needs_entity_pick(&self) -> bool {
+        self.array.is_none()
+    }
+
+    fn on_entity_pick(&mut self, handle: Handle, _pt: DVec3) -> CmdResult {
+        if handle.is_null() {
+            return CmdResult::NeedPoint;
+        }
+        self.array = Some(handle);
+        CmdResult::NeedPoint
+    }
+
+    fn wants_text_input(&self) -> bool {
+        self.array.is_some()
+    }
+
+    fn on_text_input(&mut self, text: &str) -> Option<CmdResult> {
+        let array = self.array?;
+        match text.trim().trim_start_matches('_').to_ascii_uppercase().as_str() {
+            "S" | "SOURCE" => Some(CmdResult::Dispatch(format!(
+                "ARRAYEDIT_SOURCE:{}",
+                array.value()
+            ))),
+            "X" | "EXIT" => Some(CmdResult::Cancel),
+            _ => None,
+        }
+    }
+
+    fn on_point(&mut self, _pt: DVec3) -> CmdResult {
+        CmdResult::NeedPoint
+    }
+
+    fn on_enter(&mut self) -> CmdResult {
+        CmdResult::Cancel
+    }
+}
+
+inventory::submit!(crate::command::CommandRegistration { names: &["ARRAYEDIT"] });

src/modules/draw/modify/mod.rs

@@ -1,5 +1,6 @@
 pub mod align;
 pub mod array;
+pub mod arrayedit;
 pub mod attedit;
 pub mod blend;
 pub mod block_edit;