1b-agent/OneCAD-Draft
1
0 Fork 0
forked from 1b-agent/opencadstudio-upstream
Code Pull Requests Activity

fix(i18n): complete missing translations

Browse Source
This commit is contained in:
Hakan Seven committed 2026-08-29 09:46:47 +03:00
1 parent d9fddbe633
commit 8c0af9d584
19 files changed
+1369
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

locales/ar-SA/opencadstudio.ftl
+76
View File
@@ -248,6 +248,7 @@ command-copy =
} | مصفوفة | Enter=إنهاء | الأساس { $x },{ $y }]:
common =
.jogged-radius = نصف قطر منكسر
.none-use-shortcuts-set-key-command = (لا شيء — استخدم: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = المحاذاة:
.background-fill-enabled = تعبئة الخلفية مفعّلة
@@ -1179,6 +1180,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ المساحة=__ocs_fmt_1__ المحيط=__ocs_fmt_2__ مركز الكتلة=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = أنماط الخطوط المتعددة المحمّلة: __ocs_fmt_0__
.mline-current-settings = MLINE الإعدادات الحالية: المحاذاة = __ocs_fmt_0__، المقياس = __ocs_fmt_1__، النمط = __ocs_fmt_2__
.mline-enter-justification = MLINE أدخل نوع المحاذاة [أعلى/صفر/أسفل] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE أدخل معامل المقياس <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE أدخل اسم النمط أو [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE حدد النقطة التالية أو [إغلاق/تراجع]:
.mline-specify-next-point-undo = MLINE حدد النقطة التالية أو [تراجع]:
.multiline-style-was-not-found = لم يتم العثور على نمط الخطوط المتعددة «__ocs_arg_style__».
.donut-specify-second-point-for-inside-diameter = DONUT حدد النقطة الثانية للقطر الداخلي:
.donut-specify-second-point-for-outside-diameter = DONUT حدد النقطة الثانية للقطر الخارجي:
.spline-specify-first-point = SPLINE حدد النقطة الأولى:
.insert-x-no-attributes = الإدراج __ocs_fmt_0__: بلا سمات.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ لم يُعثر على حد مغلق.
@@ -1462,6 +1474,24 @@ draw =
.n-object-s-erased = مُسح __ocs_fmt_0__ كائن.
modify =
.add-vertex = إضافة رأس
.closed-cross = تقاطع مغلق
.closed-tee = وصلة T مغلقة
.corner-joint = وصلة زاوية
.cut-all = قص الكل
.cut-single = قص مفرد
.delete-vertex = حذف رأس
.merged-cross = تقاطع مدمج
.merged-tee = وصلة T مدمجة
.mledit-choose-an-edit-tool = MLEDIT اختر أداة تحرير:
.mledit-select-first-multiline = MLEDIT حدد الخط المتعدد الأول:
.mledit-select-second-multiline = MLEDIT حدد الخط المتعدد الثاني:
.mledit-specify-end-of-weld-range = MLEDIT حدد نهاية نطاق الدمج:
.mledit-specify-second-cut-point = MLEDIT حدد نقطة القص الثانية:
.open-cross = تقاطع مفتوح
.open-tee = وصلة T مفتوحة
.remove-vertex = إزالة رأس
.weld-all = دمج الكل
.count-objects = (__ocs_arg_count__ كائنات)
.edge-extend-indented-title-case = [الحافة: تمديد]
.align-scale-objects-based-on-alignment-points = ALIGN هل تريد تغيير مقياس الكائنات وفق نقاط المحاذاة؟ [نعم/لا]:
@@ -1798,6 +1828,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: لم يُعثر على النمط '__ocs_fmt_1__'.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED أدخل نص البعد (فارغ = القيمة المقاسة):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED حدد قوسًا أو دائرة أو قوس خط متعدد:
.dimjogged-specify-center-location-override = DIMJOGGED حدد موقع المركز البديل:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED حدد موقع خط البعد [نص متعدد/نص/زاوية]:
.dimjogged-specify-jog-location = DIMJOGGED حدد موقع الانكسار:
.dimjogged-specify-text-angle-degrees = DIMJOGGED حدد زاوية النص (بالدرجات):
.table-cell-enter-text-row-column-current = TABLE CELL أدخل نص الخلية [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE أدخل عرض العمود [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE أدخل عدد صفوف البيانات [__ocs_arg_rows__] (__ocs_arg_cols__ أعمدة):
.table-enter-row-height-height = TABLE أدخل ارتفاع الصف [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE سلوك الإدراج [نقطة/نافذة] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT أدخل وضع تحرير النص [مفرد/متعدد] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE أدخل قيمة جديدة لـ TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT النص المراد وضعه على طول القوس:
@@ -2160,6 +2201,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = تجميد | T <layer> = إلغاء التجميد | Enter = خروج
view =
.datalink-specify-insertion-point = DATALINK حدد نقطة الإدراج:
.table-block-definition-not-found = TABLE: لم يتم العثور على تعريف الكتلة.
.table-edit-applied = TABLE: تم تطبيق التعديل.
.table-field-handle-not-found = TABLE: لم يتم العثور على معرّف الحقل.
.table-row-column-out-of-range-or-cell-locked = TABLE: الصف/العمود خارج النطاق أو الخلية مقفلة.
.table-select-a-table-first = TABLE: حدد جدولًا أولًا.
.usage-table-edit-actions = الاستخدام: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = صفحة الرموز: __ocs_fmt_0__
.created-julian-6 = تاريخ الإنشاء (يولياني): __ocs_fmt_0__
@@ -2376,6 +2424,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ منفذ عرض في التخطيط "__ocs_fmt_1__":
properties =
.arrowhead-size = حجم رأس السهم
.attachment = إرفاق
.chord = وتر
.control-point-x-sentence-case = نقطة التحكم X
.control-point-y-sentence-case = نقطة التحكم Y
.control-point-z-sentence-case = نقطة التحكم Z
.control-vertices = رؤوس التحكم
.current-control-point = نقطة التحكم الحالية
.current-fit-point = نقطة الملاءمة الحالية
.cv-frame = إطار رؤوس التحكم
.end-tangent-vector-x = متجه المماس النهائي X
.end-tangent-vector-y = متجه المماس النهائي Y
.end-tangent-vector-z = متجه المماس النهائي Z
.extended-data = بيانات موسعة
.fit-point-x-sentence-case = نقطة الملاءمة X
.fit-point-y-sentence-case = نقطة الملاءمة Y
.fit-point-z-sentence-case = نقطة الملاءمة Z
.fit-tolerance-sentence-case = سماحية الملاءمة
.hide = إخفاء
.knot-parameterization-sentence-case = معلمة العقد
.number-of-control-points = عدد نقاط التحكم
.number-of-fit-points = عدد نقاط الملاءمة
.periodic = دوري
.square-root = الجذر التربيعي
.start-tangent-vector-x = متجه المماس الابتدائي X
.start-tangent-vector-y = متجه المماس الابتدائي Y
.start-tangent-vector-z = متجه المماس الابتدائي Z
.uniform = منتظم
.count-objects-selected = تم تحديد __ocs_arg_count__ كائنات
.scope-visual-style = النمط المرئي __ocs_arg_scope__
.value-3d-face = وجه ثلاثي الأبعاد
locales/bg-BG/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
*[other] { $count } копия досега
} | Масив | Enter=готово | база { $x },{ $y }]:
common =
.jogged-radius = Радиус с чупка
.none-use-shortcuts-set-key-command = (няма — използвай: SHORTCUTS SET <клавиш> <команда>)
.alignment-indented-label-title-case = Подравняване:
.background-fill-enabled = Запълване на фона активирано
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Площ=__ocs_fmt_1__ Периметър=__ocs_fmt_2__ Центроид=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Заредени стилове за мултилинии: __ocs_fmt_0__
.mline-current-settings = MLINE Текущи настройки: Подравняване = __ocs_fmt_0__, Мащаб = __ocs_fmt_1__, Стил = __ocs_fmt_2__
.mline-enter-justification = MLINE Въведете подравняване [Горе/Нула/Долу] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Въведете мащабен коефициент <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Въведете име на стил или [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Посочете следваща точка или [Затвори/Отмени]:
.mline-specify-next-point-undo = MLINE Посочете следваща точка или [Отмени]:
.multiline-style-was-not-found = Стилът за мултилиния „__ocs_arg_style__“ не е намерен.
.donut-specify-second-point-for-inside-diameter = DONUT Посочете втора точка за вътрешния диаметър:
.donut-specify-second-point-for-outside-diameter = DONUT Посочете втора точка за външния диаметър:
.spline-specify-first-point = SPLINE Посочете първа точка:
.insert-x-no-attributes = Вмъкване __ocs_fmt_0__: без атрибути.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Не е намерена затворена граница.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ обект(а) изтрити.
modify =
.add-vertex = Добавяне на връх
.closed-cross = Затворен кръст
.closed-tee = Затворено Т-съединение
.corner-joint = Ъглова връзка
.cut-all = Изрязване на всички
.cut-single = Единично изрязване
.delete-vertex = Изтриване на връх
.merged-cross = Обединен кръст
.merged-tee = Обединено Т-съединение
.mledit-choose-an-edit-tool = MLEDIT Изберете инструмент за редактиране:
.mledit-select-first-multiline = MLEDIT Изберете първата мултилиния:
.mledit-select-second-multiline = MLEDIT Изберете втората мултилиния:
.mledit-specify-end-of-weld-range = MLEDIT Посочете края на диапазона за съединяване:
.mledit-specify-second-cut-point = MLEDIT Посочете втората точка на изрязване:
.open-cross = Отворен кръст
.open-tee = Отворено Т-съединение
.remove-vertex = Премахване на връх
.weld-all = Съединяване на всички
.count-objects = (__ocs_arg_count__ обекта)
.edge-extend-indented-title-case = [Ръб: Удължи]
.align-scale-objects-based-on-alignment-points = ALIGN Да се мащабират ли обектите на база точките за подравняване? [Да/Не]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: стил "__ocs_fmt_1__" не е намерен.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Въведете текст на размера (празно = измерена стойност):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Изберете дъга, окръжност или дъга от полилиния:
.dimjogged-specify-center-location-override = DIMJOGGED Посочете заместващо положение на центъра:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Посочете положение на размерната линия [Мтекст/Текст/Ъгъл]:
.dimjogged-specify-jog-location = DIMJOGGED Посочете положение на чупката:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Посочете ъгъл на текста (градуси):
.table-cell-enter-text-row-column-current = TABLE CELL Въведете текст за [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Въведете ширина на колоната [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Въведете брой редове с данни [__ocs_arg_rows__] (__ocs_arg_cols__ колони):
.table-enter-row-height-height = TABLE Въведете височина на реда [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Режим на вмъкване [Точка/Прозорец] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Влез в режим на редакция на текст [Единичен/Многократен] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Въведи нова стойност за TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT текст за поставяне по дъгата:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <слой> = Замрази | T <слой> = Размрази | Enter = Изход
view =
.datalink-specify-insertion-point = DATALINK Посочете точка на вмъкване:
.table-block-definition-not-found = TABLE: дефиницията на блока не е намерена.
.table-edit-applied = TABLE: редакцията е приложена.
.table-field-handle-not-found = TABLE: идентификаторът на полето не е намерен.
.table-row-column-out-of-range-or-cell-locked = TABLE: редът/колоната е извън диапазона или клетката е заключена.
.table-select-a-table-first = TABLE: първо изберете таблица.
.usage-table-edit-actions = Употреба: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Кодова страница: __ocs_fmt_0__
.created-julian-6 = Създадено (Юлиански): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ изглед(а) в оформление "__ocs_fmt_1__":
properties =
.arrowhead-size = Размер на върха на стрелката
.attachment = Прикачване
.chord = Хорда
.control-point-x-sentence-case = Контролна точка X
.control-point-y-sentence-case = Контролна точка Y
.control-point-z-sentence-case = Контролна точка Z
.control-vertices = Контролни върхове
.current-control-point = Текуща контролна точка
.current-fit-point = Текуща апроксимационна точка
.cv-frame = Рамка на КВ
.end-tangent-vector-x = Краен допирателен вектор X
.end-tangent-vector-y = Краен допирателен вектор Y
.end-tangent-vector-z = Краен допирателен вектор Z
.extended-data = Разширени данни
.fit-point-x-sentence-case = Апроксимационна точка X
.fit-point-y-sentence-case = Апроксимационна точка Y
.fit-point-z-sentence-case = Апроксимационна точка Z
.fit-tolerance-sentence-case = Допуск на апроксимация
.hide = Скриване
.knot-parameterization-sentence-case = Параметризация на възлите
.number-of-control-points = Брой контролни точки
.number-of-fit-points = Брой апроксимационни точки
.periodic = Периодична
.square-root = Квадратен корен
.start-tangent-vector-x = Начален допирателен вектор X
.start-tangent-vector-y = Начален допирателен вектор Y
.start-tangent-vector-z = Начален допирателен вектор Z
.uniform = Равномерна
.count-objects-selected = __ocs_arg_count__ избрани обекта
.scope-visual-style = Визуален стил на __ocs_arg_scope__
.value-3d-face = 3D Стена
locales/cs-CZ/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | Pole | Enter=hotovo | základna { $x },{ $y }]:
common =
.jogged-radius = Zalomený poloměr
.none-use-shortcuts-set-key-command =(žádné — použijte: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Zarovnání:
.background-fill-enabled = Výplň pozadí povolena
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Plocha=__ocs_fmt_1__ Obvod=__ocs_fmt_2__ Centroid=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Načtené styly multičar: __ocs_fmt_0__
.mline-current-settings = MLINE Aktuální nastavení: Zarovnání = __ocs_fmt_0__, Měřítko = __ocs_fmt_1__, Styl = __ocs_fmt_2__
.mline-enter-justification = MLINE Zadejte zarovnání [Nahoře/Nula/Dole] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Zadejte měřítko <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Zadejte název stylu nebo [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Určete další bod nebo [Zavřít/Zpět]:
.mline-specify-next-point-undo = MLINE Určete další bod nebo [Zpět]:
.multiline-style-was-not-found = Styl multičáry „__ocs_arg_style__“ nebyl nalezen.
.donut-specify-second-point-for-inside-diameter = DONUT Určete druhý bod vnitřního průměru:
.donut-specify-second-point-for-outside-diameter = DONUT Určete druhý bod vnějšího průměru:
.spline-specify-first-point = SPLINE Určete první bod:
.insert-x-no-attributes = Vložit __ocs_fmt_0__: žádné atributy.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Nebyla nalezena žádná uzavřená hranice.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = Objekty __ocs_fmt_0__ byly vymazány.
modify =
.add-vertex = Přidat vrchol
.closed-cross = Uzavřený kříž
.closed-tee = Uzavřené T
.corner-joint = Rohový spoj
.cut-all = Oříznout vše
.cut-single = Oříznout jednotlivě
.delete-vertex = Odstranit vrchol
.merged-cross = Sloučený kříž
.merged-tee = Sloučené T
.mledit-choose-an-edit-tool = MLEDIT Vyberte nástroj úprav:
.mledit-select-first-multiline = MLEDIT Vyberte první multičáru:
.mledit-select-second-multiline = MLEDIT Vyberte druhou multičáru:
.mledit-specify-end-of-weld-range = MLEDIT Určete konec rozsahu spojení:
.mledit-specify-second-cut-point = MLEDIT Určete druhý bod řezu:
.open-cross = Otevřený kříž
.open-tee = Otevřené T
.remove-vertex = Odebrat vrchol
.weld-all = Spojit vše
.count-objects = (Objekty __ocs_arg_count__)
.edge-extend-indented-title-case = [Okraj: Prodloužit]
.align-scale-objects-based-on-alignment-points = ALIGN Měřítko objektů na základě bodů zarovnání? [Y/N]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: styl '__ocs_fmt_1__' nebyl nalezen.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Zadejte text kóty (prázdné = změřená hodnota):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Vyberte oblouk, kružnici nebo oblouk křivky:
.dimjogged-specify-center-location-override = DIMJOGGED Určete náhradní polohu středu:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Určete polohu kótovací čáry [Mtext/Text/Úhel]:
.dimjogged-specify-jog-location = DIMJOGGED Určete polohu zalomení:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Určete úhel textu (stupně):
.table-cell-enter-text-row-column-current = TABLE CELL Zadejte text pro [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Zadejte šířku sloupce [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Zadejte počet datových řádků [__ocs_arg_rows__] (__ocs_arg_cols__ sloupců):
.table-enter-row-height-height = TABLE Zadejte výšku řádku [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Způsob vložení [Bod/Okno] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Režim úpravy textu Enter [Jeden/Více] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Enter nová hodnota pro TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = Text ARCTEXT k umístění podél oblouku:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Zmrazit | T <layer> = Rozmrazit | Enter = Konec
view =
.datalink-specify-insertion-point = DATALINK Určete bod vložení:
.table-block-definition-not-found = TABLE: definice bloku nebyla nalezena.
.table-edit-applied = TABLE: úprava byla použita.
.table-field-handle-not-found = TABLE: identifikátor pole nebyl nalezen.
.table-row-column-out-of-range-or-cell-locked = TABLE: řádek/sloupec je mimo rozsah nebo je buňka uzamčena.
.table-select-a-table-first = TABLE: nejprve vyberte tabulku.
.usage-table-edit-actions = Použití: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Kódová stránka: __ocs_fmt_0__
.created-julian-6 = Vytvořeno (Julian): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout =Výřezy __ocs_fmt_0__ v rozložení "__ocs_fmt_1__":
properties =
.arrowhead-size = Velikost hrotu šipky
.attachment = Připojení
.chord = Tětiva
.control-point-x-sentence-case = Řídicí bod X
.control-point-y-sentence-case = Řídicí bod Y
.control-point-z-sentence-case = Řídicí bod Z
.control-vertices = Řídicí vrcholy
.current-control-point = Aktuální řídicí bod
.current-fit-point = Aktuální prokládací bod
.cv-frame = Rámec ŘV
.end-tangent-vector-x = Koncový tečný vektor X
.end-tangent-vector-y = Koncový tečný vektor Y
.end-tangent-vector-z = Koncový tečný vektor Z
.extended-data = Rozšířená data
.fit-point-x-sentence-case = Prokládací bod X
.fit-point-y-sentence-case = Prokládací bod Y
.fit-point-z-sentence-case = Prokládací bod Z
.fit-tolerance-sentence-case = Tolerance proložení
.hide = Skrýt
.knot-parameterization-sentence-case = Parametrizace uzlů
.number-of-control-points = Počet řídicích bodů
.number-of-fit-points = Počet prokládacích bodů
.periodic = Periodická
.square-root = Druhá odmocnina
.start-tangent-vector-x = Počáteční tečný vektor X
.start-tangent-vector-y = Počáteční tečný vektor Y
.start-tangent-vector-z = Počáteční tečný vektor Z
.uniform = Rovnoměrná
.count-objects-selected = Vybrány objekty __ocs_arg_count__
.scope-visual-style = Vizuální styl __ocs_arg_scope__
.value-3d-face = 3D obličej
locales/de-DE/opencadstudio.ftl
+76
View File
@@ -236,6 +236,7 @@ command-copy =
} | Array | Eingabe=fertig | Basis { $x },{ $y }]:
common =
.jogged-radius = Geknickter Radius
.none-use-shortcuts-set-key-command = (keine — verwenden: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Ausrichtung:
.background-fill-enabled = Hintergrundfüllung aktiviert
@@ -1167,6 +1168,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Fläche=__ocs_fmt_1__ Umfang=__ocs_fmt_2__ Schwerpunkt=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Geladene Multilinienstile: __ocs_fmt_0__
.mline-current-settings = MLINE Aktuelle Einstellungen: Ausrichtung = __ocs_fmt_0__, Skalierung = __ocs_fmt_1__, Stil = __ocs_fmt_2__
.mline-enter-justification = MLINE Ausrichtung eingeben [Oben/Null/Unten] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Skalierungsfaktor eingeben <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Stilnamen oder [?] eingeben <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Nächsten Punkt angeben oder [Schließen/Rückgängig]:
.mline-specify-next-point-undo = MLINE Nächsten Punkt angeben oder [Rückgängig]:
.multiline-style-was-not-found = Multilinienstil „__ocs_arg_style__“ wurde nicht gefunden.
.donut-specify-second-point-for-inside-diameter = DONUT Zweiten Punkt für Innendurchmesser angeben:
.donut-specify-second-point-for-outside-diameter = DONUT Zweiten Punkt für Außendurchmesser angeben:
.spline-specify-first-point = SPLINE Ersten Punkt angeben:
.insert-x-no-attributes = __ocs_fmt_0__ einfügen: keine Attribute.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Keine geschlossene Begrenzung gefunden.
@@ -1450,6 +1462,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ Objekt(e) gelöscht.
modify =
.add-vertex = Scheitelpunkt hinzufügen
.closed-cross = Geschlossenes Kreuz
.closed-tee = Geschlossenes T-Stück
.corner-joint = Eckverbindung
.cut-all = Alle schneiden
.cut-single = Einzeln schneiden
.delete-vertex = Scheitelpunkt löschen
.merged-cross = Vereintes Kreuz
.merged-tee = Vereintes T-Stück
.mledit-choose-an-edit-tool = MLEDIT Bearbeitungswerkzeug auswählen:
.mledit-select-first-multiline = MLEDIT Erste Multilinie auswählen:
.mledit-select-second-multiline = MLEDIT Zweite Multilinie auswählen:
.mledit-specify-end-of-weld-range = MLEDIT Ende des Schweißbereichs angeben:
.mledit-specify-second-cut-point = MLEDIT Zweiten Schnittpunkt angeben:
.open-cross = Offenes Kreuz
.open-tee = Offenes T-Stück
.remove-vertex = Scheitelpunkt entfernen
.weld-all = Alle verschweißen
.count-objects = (__ocs_arg_count__ Objekte)
.edge-extend-indented-title-case = [Kante: Verlängern]
.align-scale-objects-based-on-alignment-points = ALIGN Skalierung von Objekten auf Basis von Ausrichtungspunkten? [Y/N]:
@@ -1786,6 +1816,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: Stil '__ocs_fmt_1__' nicht gefunden.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Maßtext eingeben (leer = Messwert):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Bogen, Kreis oder Polylinienbogen auswählen:
.dimjogged-specify-center-location-override = DIMJOGGED Überschriebene Mittelpunktposition angeben:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Position der Maßlinie angeben [MText/Text/Winkel]:
.dimjogged-specify-jog-location = DIMJOGGED Knickposition angeben:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Textwinkel (Grad) angeben:
.table-cell-enter-text-row-column-current = TABLE CELL Text für [__ocs_arg_row__,__ocs_arg_column__] eingeben <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Spaltenbreite eingeben [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Anzahl der Datenzeilen eingeben [__ocs_arg_rows__] (__ocs_arg_cols__ Spalten):
.table-enter-row-height-height = TABLE Zeilenhöhe eingeben [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Einfügeverhalten [Punkt/Fenster] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Geben Sie den Textbearbeitungsmodus [Single/Multiple] ein <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Geben Sie neuen Wert für TEXTEDITMODE <__ocs_arg_v__> ein:
.arctext-text-to-place-along-the-arc = ARCTEXT Text zum Platzieren entlang des Bogens:
@@ -2146,6 +2187,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <Ebene> = Einfrieren | T <Ebene> = Auftauen | Eingabe = Beenden
view =
.datalink-specify-insertion-point = DATALINK Einfügepunkt angeben:
.table-block-definition-not-found = TABLE: Blockdefinition nicht gefunden.
.table-edit-applied = TABLE: Bearbeitung angewendet.
.table-field-handle-not-found = TABLE: Feld-Handle nicht gefunden.
.table-row-column-out-of-range-or-cell-locked = TABLE: Zeile/Spalte liegt außerhalb des Bereichs oder die Zelle ist gesperrt.
.table-select-a-table-first = TABLE: Zuerst eine Tabelle auswählen.
.usage-table-edit-actions = Verwendung: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Codeseite: __ocs_fmt_0__
.created-julian-6 = Erstellt (Julian): __ocs_fmt_0__
@@ -2362,6 +2410,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ Ansichtsfenster(s) im Layout "__ocs_fmt_1__":
properties =
.arrowhead-size = Pfeilspitzengröße
.attachment = Zuordnung
.chord = Sehne
.control-point-x-sentence-case = Kontrollpunkt X
.control-point-y-sentence-case = Kontrollpunkt Y
.control-point-z-sentence-case = Kontrollpunkt Z
.control-vertices = Kontrollscheitelpunkte
.current-control-point = Aktueller Kontrollpunkt
.current-fit-point = Aktueller Anpassungspunkt
.cv-frame = KS-Rahmen
.end-tangent-vector-x = Endtangentenvektor X
.end-tangent-vector-y = Endtangentenvektor Y
.end-tangent-vector-z = Endtangentenvektor Z
.extended-data = Erweiterte Daten
.fit-point-x-sentence-case = Anpassungspunkt X
.fit-point-y-sentence-case = Anpassungspunkt Y
.fit-point-z-sentence-case = Anpassungspunkt Z
.fit-tolerance-sentence-case = Anpassungstoleranz
.hide = Ausblenden
.knot-parameterization-sentence-case = Knotenparametrisierung
.number-of-control-points = Anzahl der Kontrollpunkte
.number-of-fit-points = Anzahl der Anpassungspunkte
.periodic = Periodisch
.square-root = Quadratwurzel
.start-tangent-vector-x = Starttangentenvektor X
.start-tangent-vector-y = Starttangentenvektor Y
.start-tangent-vector-z = Starttangentenvektor Z
.uniform = Gleichmäßig
.count-objects-selected = __ocs_arg_count__ Objekte ausgewählt
.scope-visual-style = __ocs_arg_scope__ visueller Stil
.value-3d-face = 3D-Gesicht
locales/es-ES/opencadstudio.ftl
+76
View File
@@ -236,6 +236,7 @@ command-copy =
} | Matriz | Enter=terminar | base { $x },{ $y }]:
common =
.jogged-radius = Radio con recodo
.none-use-shortcuts-set-key-command = (ninguno — use: SHORTCUTS SET <tecla> <comando>)
.alignment-indented-label-title-case = Alineación:
.background-fill-enabled = Relleno de fondo activado
@@ -1167,6 +1168,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Área=__ocs_fmt_1__ Perímetro=__ocs_fmt_2__ Centroide=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Estilos de línea múltiple cargados: __ocs_fmt_0__
.mline-current-settings = MLINE Configuración actual: Justificación = __ocs_fmt_0__, Escala = __ocs_fmt_1__, Estilo = __ocs_fmt_2__
.mline-enter-justification = MLINE Introduzca la justificación [Superior/Cero/Inferior] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Introduzca el factor de escala <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Introduzca el nombre de estilo o [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Especifique el punto siguiente o [Cerrar/Deshacer]:
.mline-specify-next-point-undo = MLINE Especifique el punto siguiente o [Deshacer]:
.multiline-style-was-not-found = No se encontró el estilo de línea múltiple «__ocs_arg_style__».
.donut-specify-second-point-for-inside-diameter = DONUT Especifique el segundo punto del diámetro interior:
.donut-specify-second-point-for-outside-diameter = DONUT Especifique el segundo punto del diámetro exterior:
.spline-specify-first-point = SPLINE Especifique el primer punto:
.insert-x-no-attributes = Inserción __ocs_fmt_0__: sin atributos.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ No se encontró ningún contorno cerrado.
@@ -1450,6 +1462,24 @@ draw =
.n-object-s-erased = Se borraron __ocs_fmt_0__ objetos.
modify =
.add-vertex = Añadir vértice
.closed-cross = Cruz cerrada
.closed-tee = T cerrada
.corner-joint = Unión de esquina
.cut-all = Cortar todo
.cut-single = Corte único
.delete-vertex = Eliminar vértice
.merged-cross = Cruz fusionada
.merged-tee = T fusionada
.mledit-choose-an-edit-tool = MLEDIT Elija una herramienta de edición:
.mledit-select-first-multiline = MLEDIT Seleccione la primera línea múltiple:
.mledit-select-second-multiline = MLEDIT Seleccione la segunda línea múltiple:
.mledit-specify-end-of-weld-range = MLEDIT Especifique el final del intervalo de unión:
.mledit-specify-second-cut-point = MLEDIT Especifique el segundo punto de corte:
.open-cross = Cruz abierta
.open-tee = T abierta
.remove-vertex = Quitar vértice
.weld-all = Unir todo
.count-objects = (__ocs_arg_count__ objetos)
.edge-extend-indented-title-case = [Borde: Alargar]
.align-scale-objects-based-on-alignment-points = ALIGN ¿Escalar los objetos según los puntos de alineación? [S/N]:
@@ -1786,6 +1816,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: no se encontró el estilo «__ocs_fmt_1__».
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Introduzca el texto de cota (vacío = valor medido):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Seleccione un arco, círculo o arco de polilínea:
.dimjogged-specify-center-location-override = DIMJOGGED Especifique la ubicación alternativa del centro:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Especifique la ubicación de la línea de cota [TextoM/Texto/Ángulo]:
.dimjogged-specify-jog-location = DIMJOGGED Especifique la ubicación del recodo:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Especifique el ángulo del texto (grados):
.table-cell-enter-text-row-column-current = TABLE CELL Introduzca el texto para [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Introduzca el ancho de columna [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Introduzca el número de filas de datos [__ocs_arg_rows__] (__ocs_arg_cols__ columnas):
.table-enter-row-height-height = TABLE Introduzca la altura de fila [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Comportamiento de inserción [Punto/Ventana] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Indique el modo de edición de texto [Único/Múltiple] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Introduzca un valor nuevo para TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT Texto que se colocará a lo largo del arco:
@@ -2148,6 +2189,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <capa> = Inutilizar | T <capa> = Reutilizar | Intro = Salir
view =
.datalink-specify-insertion-point = DATALINK Especifique el punto de inserción:
.table-block-definition-not-found = TABLE: no se encontró la definición de bloque.
.table-edit-applied = TABLE: edición aplicada.
.table-field-handle-not-found = TABLE: no se encontró el identificador de campo.
.table-row-column-out-of-range-or-cell-locked = TABLE: la fila/columna está fuera de rango o la celda está bloqueada.
.table-select-a-table-first = TABLE: seleccione primero una tabla.
.usage-table-edit-actions = Uso: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Página de códigos: __ocs_fmt_0__
.created-julian-6 = Creado (juliano): __ocs_fmt_0__
@@ -2364,6 +2412,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ ventanas gráficas en la presentación «__ocs_fmt_1__»:
properties =
.arrowhead-size = Tamaño de punta de flecha
.attachment = Enlace
.chord = Cuerda
.control-point-x-sentence-case = Punto de control X
.control-point-y-sentence-case = Punto de control Y
.control-point-z-sentence-case = Punto de control Z
.control-vertices = Vértices de control
.current-control-point = Punto de control actual
.current-fit-point = Punto de ajuste actual
.cv-frame = Marco de VC
.end-tangent-vector-x = Vector tangente final X
.end-tangent-vector-y = Vector tangente final Y
.end-tangent-vector-z = Vector tangente final Z
.extended-data = Datos extendidos
.fit-point-x-sentence-case = Punto de ajuste X
.fit-point-y-sentence-case = Punto de ajuste Y
.fit-point-z-sentence-case = Punto de ajuste Z
.fit-tolerance-sentence-case = Tolerancia de ajuste
.hide = Ocultar
.knot-parameterization-sentence-case = Parametrización de nudos
.number-of-control-points = Número de puntos de control
.number-of-fit-points = Número de puntos de ajuste
.periodic = Periódica
.square-root = Raíz cuadrada
.start-tangent-vector-x = Vector tangente inicial X
.start-tangent-vector-y = Vector tangente inicial Y
.start-tangent-vector-z = Vector tangente inicial Z
.uniform = Uniforme
.count-objects-selected = __ocs_arg_count__ objetos seleccionados
.scope-visual-style = Estilo visual de __ocs_arg_scope__
.value-3d-face = Cara 3D
locales/fi-FI/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | taulukko | Enter=valmis | pohja { $x },{ $y }]:
common =
.jogged-radius = Katkaistu säde
.none-use-shortcuts-set-key-command =(ei mitään — käytä: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Tasaus:
.background-fill-enabled = Taustan täyttö käytössä
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__-alue=__ocs_fmt_1__ Kehä=__ocs_fmt_2__ Keskivartalo=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Ladatut moniviivatyylit: __ocs_fmt_0__
.mline-current-settings = MLINE Nykyiset asetukset: Tasaus = __ocs_fmt_0__, Mittakaava = __ocs_fmt_1__, Tyyli = __ocs_fmt_2__
.mline-enter-justification = MLINE Anna tasaus [Ylä/Nolla/Ala] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Anna mittakaavakerroin <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Anna tyylin nimi tai [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Määritä seuraava piste tai [Sulje/Kumoa]:
.mline-specify-next-point-undo = MLINE Määritä seuraava piste tai [Kumoa]:
.multiline-style-was-not-found = Moniviivatyyliä ”__ocs_arg_style__” ei löytynyt.
.donut-specify-second-point-for-inside-diameter = DONUT Määritä sisähalkaisijan toinen piste:
.donut-specify-second-point-for-outside-diameter = DONUT Määritä ulkohalkaisijan toinen piste:
.spline-specify-first-point = SPLINE Määritä ensimmäinen piste:
.insert-x-no-attributes = Lisää __ocs_fmt_0__: ei määritteitä.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Suljettua rajaa ei löytynyt.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ objekti(t) poistettu.
modify =
.add-vertex = Lisää kärkipiste
.closed-cross = Suljettu risteys
.closed-tee = Suljettu T-liitos
.corner-joint = Kulmaliitos
.cut-all = Leikkaa kaikki
.cut-single = Leikkaa yksi
.delete-vertex = Poista kärkipiste
.merged-cross = Yhdistetty risteys
.merged-tee = Yhdistetty T-liitos
.mledit-choose-an-edit-tool = MLEDIT Valitse muokkaustyökalu:
.mledit-select-first-multiline = MLEDIT Valitse ensimmäinen moniviiva:
.mledit-select-second-multiline = MLEDIT Valitse toinen moniviiva:
.mledit-specify-end-of-weld-range = MLEDIT Määritä liitosalueen loppu:
.mledit-specify-second-cut-point = MLEDIT Määritä toinen leikkauspiste:
.open-cross = Avoin risteys
.open-tee = Avoin T-liitos
.remove-vertex = Irrota kärkipiste
.weld-all = Yhdistä kaikki
.count-objects = (__ocs_arg_count__ objektit)
.edge-extend-indented-title-case = [Reuna: Laajenna]
.align-scale-objects-based-on-alignment-points = ALIGN Skaalataanko objektit kohdistuspisteiden perusteella? [Y/N]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: tyyliä '__ocs_fmt_1__' ei löydy.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Anna mittateksti (tyhjä = mitattu arvo):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Valitse kaari, ympyrä tai murtoviivan kaari:
.dimjogged-specify-center-location-override = DIMJOGGED Määritä korvaava keskipisteen sijainti:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Määritä mittaviivan sijainti [Moniriviteksti/Teksti/Kulma]:
.dimjogged-specify-jog-location = DIMJOGGED Määritä katkaisun sijainti:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Määritä tekstin kulma (astetta):
.table-cell-enter-text-row-column-current = TABLE CELL Anna solun [__ocs_arg_row__,__ocs_arg_column__] teksti <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Anna sarakkeen leveys [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Anna tietorivien määrä [__ocs_arg_rows__] (__ocs_arg_cols__ saraketta):
.table-enter-row-height-height = TABLE Anna rivin korkeus [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Lisäystapa [Piste/Ikkuna] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Enter tekstin muokkaustila [yksi/useita] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Enter uusi arvo TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT kaarelle sijoitettava teksti:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Jäädytys | T <layer> = Sulatus | Enter = Poistu
view =
.datalink-specify-insertion-point = DATALINK Määritä lisäyspiste:
.table-block-definition-not-found = TABLE: lohkomääritystä ei löytynyt.
.table-edit-applied = TABLE: muokkaus otettu käyttöön.
.table-field-handle-not-found = TABLE: kentän tunnistetta ei löytynyt.
.table-row-column-out-of-range-or-cell-locked = TABLE: rivi/sarake on alueen ulkopuolella tai solu on lukittu.
.table-select-a-table-first = TABLE: valitse ensin taulukko.
.usage-table-edit-actions = Käyttö: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Koodisivu: __ocs_fmt_0__
.created-julian-6 = Luotu (Julian): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout =__ocs_fmt_0__-näkymä(t) asettelussa "__ocs_fmt_1__":
properties =
.arrowhead-size = Nuolenkärjen koko
.attachment = Liitos
.chord = Jänne
.control-point-x-sentence-case = Ohjauspiste X
.control-point-y-sentence-case = Ohjauspiste Y
.control-point-z-sentence-case = Ohjauspiste Z
.control-vertices = Ohjauskärkipisteet
.current-control-point = Nykyinen ohjauspiste
.current-fit-point = Nykyinen sovituspiste
.cv-frame = Ohjauskärkipistekehys
.end-tangent-vector-x = Lopputangenttivektori X
.end-tangent-vector-y = Lopputangenttivektori Y
.end-tangent-vector-z = Lopputangenttivektori Z
.extended-data = Laajennetut tiedot
.fit-point-x-sentence-case = Sovituspiste X
.fit-point-y-sentence-case = Sovituspiste Y
.fit-point-z-sentence-case = Sovituspiste Z
.fit-tolerance-sentence-case = Sovitustoleranssi
.hide = Piilota
.knot-parameterization-sentence-case = Solmuparametrisointi
.number-of-control-points = Ohjauspisteiden määrä
.number-of-fit-points = Sovituspisteiden määrä
.periodic = Jaksollinen
.square-root = Neliöjuuri
.start-tangent-vector-x = Alkutangenttivektori X
.start-tangent-vector-y = Alkutangenttivektori Y
.start-tangent-vector-z = Alkutangenttivektori Z
.uniform = Tasainen
.count-objects-selected = __ocs_arg_count__ objektia valittu
.scope-visual-style = __ocs_arg_scope__ visuaalinen tyyli
.value-3d-face = 3D-kasvot
locales/fr-FR/opencadstudio.ftl
+76
View File
@@ -236,6 +236,7 @@ command-copy =
} | Réseau | Entrée=terminer | base { $x },{ $y }] :
common =
.jogged-radius = Rayon raccourci
.none-use-shortcuts-set-key-command = (aucune utilisation: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Alignement :
.background-fill-enabled = Remplissage du fond activé
@@ -1167,6 +1168,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Superficie=__ocs_fmt_1__ Périmètre=__ocs_fmt_2__ Centroid=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Styles de multilignes chargés : __ocs_fmt_0__
.mline-current-settings = MLINE Paramètres actuels : Justification = __ocs_fmt_0__, Échelle = __ocs_fmt_1__, Style = __ocs_fmt_2__
.mline-enter-justification = MLINE Entrez le type de justification [Haut/Zéro/Bas] <__ocs_fmt_0__> :
.mline-enter-scale-factor-default = MLINE Entrez le facteur d’échelle <__ocs_fmt_0__> :
.mline-enter-style-name = MLINE Entrez le nom du style ou [?] <__ocs_fmt_0__> :
.mline-specify-next-point-close-undo = MLINE Spécifiez le point suivant ou [Fermer/Annuler] :
.mline-specify-next-point-undo = MLINE Spécifiez le point suivant ou [Annuler] :
.multiline-style-was-not-found = Le style de multiligne « __ocs_arg_style__ » est introuvable.
.donut-specify-second-point-for-inside-diameter = DONUT Spécifiez le deuxième point du diamètre intérieur :
.donut-specify-second-point-for-outside-diameter = DONUT Spécifiez le deuxième point du diamètre extérieur :
.spline-specify-first-point = SPLINE Spécifiez le premier point :
.insert-x-no-attributes = Insérer __ocs_fmt_0__: aucun attribut.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Aucune limite fermée trouvée.
@@ -1450,6 +1462,24 @@ draw =
.n-object-s-erased = Objets effacés : __ocs_fmt_0__.
modify =
.add-vertex = Ajouter un sommet
.closed-cross = Croix fermée
.closed-tee = Té fermé
.corner-joint = Raccord d’angle
.cut-all = Couper tout
.cut-single = Coupe simple
.delete-vertex = Supprimer le sommet
.merged-cross = Croix fusionnée
.merged-tee = Té fusionné
.mledit-choose-an-edit-tool = MLEDIT Choisissez un outil de modification :
.mledit-select-first-multiline = MLEDIT Sélectionnez la première multiligne :
.mledit-select-second-multiline = MLEDIT Sélectionnez la deuxième multiligne :
.mledit-specify-end-of-weld-range = MLEDIT Spécifiez la fin de la zone de soudure :
.mledit-specify-second-cut-point = MLEDIT Spécifiez le deuxième point de coupe :
.open-cross = Croix ouverte
.open-tee = Té ouvert
.remove-vertex = Retirer le sommet
.weld-all = Tout souder
.count-objects = (__ocs_arg_count__ objets)
.edge-extend-indented-title-case = [Étendez-vous]
.align-scale-objects-based-on-alignment-points = ALIGN Échelle des objets en fonction des points d'alignement? [A/N]:
@@ -1786,6 +1816,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: style '__ocs_fmt_1__' non trouvé.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Entrez le texte de cote (vide = valeur mesurée) :
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Sélectionnez un arc, un cercle ou un arc de polyligne :
.dimjogged-specify-center-location-override = DIMJOGGED Spécifiez le remplacement de la position du centre :
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Spécifiez la position de la ligne de cote [TextMult/Texte/Angle] :
.dimjogged-specify-jog-location = DIMJOGGED Spécifiez la position du décrochement :
.dimjogged-specify-text-angle-degrees = DIMJOGGED Spécifiez l’angle du texte (degrés) :
.table-cell-enter-text-row-column-current = TABLE CELL Entrez le texte pour [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__> :
.table-enter-column-width-width = TABLE Entrez la largeur de colonne [__ocs_arg_width__] :
.table-enter-number-of-data-rows-rows-cols = TABLE Entrez le nombre de lignes de données [__ocs_arg_rows__] (__ocs_arg_cols__ colonnes) :
.table-enter-row-height-height = TABLE Entrez la hauteur de ligne [__ocs_arg_height__] :
.table-insertion-behavior-point-window-mode = TABLE Mode d’insertion [Point/Fenêtre] <__ocs_arg_mode__> :
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Entrez le mode de modification de texte [Single/Multiple] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Saisissez une nouvelle valeur pour TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT texte à placer le long de l'arc:
@@ -2148,6 +2189,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Freeze , T <layer> = Thaw , Entrée = Sortie
view =
.datalink-specify-insertion-point = DATALINK Spécifiez le point d’insertion :
.table-block-definition-not-found = TABLE : définition de bloc introuvable.
.table-edit-applied = TABLE : modification appliquée.
.table-field-handle-not-found = TABLE : identifiant de champ introuvable.
.table-row-column-out-of-range-or-cell-locked = TABLE : ligne/colonne hors limites ou cellule verrouillée.
.table-select-a-table-first = TABLE : sélectionnez d’abord une table.
.usage-table-edit-actions = Utilisation : TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Page de code : __ocs_fmt_0__
.created-julian-6 = Création (Julienne): __ocs_fmt_0__
@@ -2364,6 +2412,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ fenêtre(s) dans la présentation « __ocs_fmt_1__ » :
properties =
.arrowhead-size = Taille de la pointe de flèche
.attachment = Attachement
.chord = Corde
.control-point-x-sentence-case = Point de contrôle X
.control-point-y-sentence-case = Point de contrôle Y
.control-point-z-sentence-case = Point de contrôle Z
.control-vertices = Sommets de contrôle
.current-control-point = Point de contrôle actuel
.current-fit-point = Point d’ajustement actuel
.cv-frame = Repère des SC
.end-tangent-vector-x = Vecteur tangent final X
.end-tangent-vector-y = Vecteur tangent final Y
.end-tangent-vector-z = Vecteur tangent final Z
.extended-data = Données étendues
.fit-point-x-sentence-case = Point d’ajustement X
.fit-point-y-sentence-case = Point d’ajustement Y
.fit-point-z-sentence-case = Point d’ajustement Z
.fit-tolerance-sentence-case = Tolérance d’ajustement
.hide = Masquer
.knot-parameterization-sentence-case = Paramétrage des nœuds
.number-of-control-points = Nombre de points de contrôle
.number-of-fit-points = Nombre de points d’ajustement
.periodic = Périodique
.square-root = Racine carrée
.start-tangent-vector-x = Vecteur tangent initial X
.start-tangent-vector-y = Vecteur tangent initial Y
.start-tangent-vector-z = Vecteur tangent initial Z
.uniform = Uniforme
.count-objects-selected = __ocs_arg_count__ objets sélectionnés
.scope-visual-style = Style visuel __ocs_arg_scope__
.value-3d-face = Face 3D
locales/hi-IN/opencadstudio.ftl
+76
View File
@@ -224,6 +224,7 @@ command-copy =
.target = COPY गंतव्य निर्दिष्ट करें [अब तक { $count } प्रतियाँ | ऐरे | Enter=पूर्ण | आधार { $x },{ $y }]:
common =
.jogged-radius = मोड़ वाला त्रिज्या माप
.none-use-shortcuts-set-key-command = (कोई नहीं — उपयोग: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = संरेखण:
.background-fill-enabled = पृष्ठभूमि भरने सक्षम
@@ -1155,6 +1156,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ क्षेत्रफल=__ocs_fmt_1__ परिमाप=__ocs_fmt_2__ केन्द्रक=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = लोड की गई मल्टीलाइन शैलियाँ: __ocs_fmt_0__
.mline-current-settings = MLINE वर्तमान सेटिंग्स: संरेखण = __ocs_fmt_0__, स्केल = __ocs_fmt_1__, शैली = __ocs_fmt_2__
.mline-enter-justification = MLINE संरेखण प्रकार दर्ज करें [ऊपर/शून्य/नीचे] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE स्केल गुणांक दर्ज करें <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE शैली का नाम या [?] दर्ज करें <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE अगला बिंदु निर्दिष्ट करें या [बंद करें/पूर्ववत करें]:
.mline-specify-next-point-undo = MLINE अगला बिंदु निर्दिष्ट करें या [पूर्ववत करें]:
.multiline-style-was-not-found = मल्टीलाइन शैली “__ocs_arg_style__” नहीं मिली।
.donut-specify-second-point-for-inside-diameter = DONUT अंदरूनी व्यास के लिए दूसरा बिंदु निर्दिष्ट करें:
.donut-specify-second-point-for-outside-diameter = DONUT बाहरी व्यास के लिए दूसरा बिंदु निर्दिष्ट करें:
.spline-specify-first-point = SPLINE पहला बिंदु निर्दिष्ट करें:
.insert-x-no-attributes = __ocs_fmt_0__: कोई विशेषता नहीं है।
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ कोई बंद सीमा नहीं मिली।
@@ -1438,6 +1450,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ ऑब्जेक्ट (s) मिटा दिया गया।
modify =
.add-vertex = शीर्ष जोड़ें
.closed-cross = बंद क्रॉस
.closed-tee = बंद T-जोड़
.corner-joint = कोने का जोड़
.cut-all = सभी काटें
.cut-single = एक काटें
.delete-vertex = शीर्ष हटाएँ
.merged-cross = मर्ज किया हुआ क्रॉस
.merged-tee = मर्ज किया हुआ T-जोड़
.mledit-choose-an-edit-tool = MLEDIT संपादन उपकरण चुनें:
.mledit-select-first-multiline = MLEDIT पहली मल्टीलाइन चुनें:
.mledit-select-second-multiline = MLEDIT दूसरी मल्टीलाइन चुनें:
.mledit-specify-end-of-weld-range = MLEDIT जोड़ सीमा का अंत निर्दिष्ट करें:
.mledit-specify-second-cut-point = MLEDIT दूसरा कट बिंदु निर्दिष्ट करें:
.open-cross = खुला क्रॉस
.open-tee = खुला T-जोड़
.remove-vertex = शीर्ष निकालें
.weld-all = सभी जोड़ें
.count-objects = (__ocs_arg_count__ ऑब्जेक्ट)
.edge-extend-indented-title-case = [किनारा: बढ़ाएँ]
.align-scale-objects-based-on-alignment-points = ALIGN संरेखण बिंदुओं के आधार पर ऑब्जेक्ट स्केल करें? [हाँ/नहीं]:
@@ -1774,6 +1804,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: शैली '__ocs_fmt_1__' नहीं मिली।
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED माप पाठ दर्ज करें (खाली = मापा गया मान):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED चाप, वृत्त या पॉलीलाइन चाप चुनें:
.dimjogged-specify-center-location-override = DIMJOGGED केंद्र का वैकल्पिक स्थान निर्दिष्ट करें:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED माप रेखा का स्थान निर्दिष्ट करें [बहुपंक्ति पाठ/पाठ/कोण]:
.dimjogged-specify-jog-location = DIMJOGGED मोड़ का स्थान निर्दिष्ट करें:
.dimjogged-specify-text-angle-degrees = DIMJOGGED पाठ कोण (डिग्री) निर्दिष्ट करें:
.table-cell-enter-text-row-column-current = TABLE CELL कक्ष [__ocs_arg_row__,__ocs_arg_column__] के लिए पाठ दर्ज करें <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE कॉलम की चौड़ाई दर्ज करें [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE डेटा पंक्तियों की संख्या दर्ज करें [__ocs_arg_rows__] (__ocs_arg_cols__ कॉलम):
.table-enter-row-height-height = TABLE पंक्ति की ऊँचाई दर्ज करें [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE सम्मिलन व्यवहार [बिंदु/विंडो] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT टेक्स्ट संपादित मोड दर्ज करें [एकल / एकाधिक] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE का नया मान दर्ज करें <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT चाप के साथ रखने के लिए पाठ:
@@ -2136,6 +2177,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <लेयर> = फ़्रीज़ | T <लेयर> = थॉ | Enter = बाहर निकलें
view =
.datalink-specify-insertion-point = DATALINK सम्मिलन बिंदु निर्दिष्ट करें:
.table-block-definition-not-found = TABLE: ब्लॉक परिभाषा नहीं मिली।
.table-edit-applied = TABLE: संपादन लागू किया गया।
.table-field-handle-not-found = TABLE: फ़ील्ड हैंडल नहीं मिला।
.table-row-column-out-of-range-or-cell-locked = TABLE: पंक्ति/कॉलम सीमा से बाहर है या कक्ष लॉक है।
.table-select-a-table-first = TABLE: पहले एक तालिका चुनें।
.usage-table-edit-actions = उपयोग: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = कोड पृष्ठ: __ocs_fmt_0__
.created-julian-6 = बनाया गया (जूलियाई): __ocs_fmt_0__
@@ -2352,6 +2400,34 @@ view =
.viewport-s-in-layout = लेआउट "__ocs_fmt_1__" में __ocs_fmt_0__ व्यूपोर्ट:
properties =
.arrowhead-size = तीर शीर्ष का आकार
.attachment = संलग्नक
.chord = जीवा
.control-point-x-sentence-case = नियंत्रण बिंदु X
.control-point-y-sentence-case = नियंत्रण बिंदु Y
.control-point-z-sentence-case = नियंत्रण बिंदु Z
.control-vertices = नियंत्रण शीर्ष
.current-control-point = वर्तमान नियंत्रण बिंदु
.current-fit-point = वर्तमान फ़िट बिंदु
.cv-frame = नियंत्रण शीर्ष फ़्रेम
.end-tangent-vector-x = अंतिम स्पर्शरेखा वेक्टर X
.end-tangent-vector-y = अंतिम स्पर्शरेखा वेक्टर Y
.end-tangent-vector-z = अंतिम स्पर्शरेखा वेक्टर Z
.extended-data = विस्तारित डेटा
.fit-point-x-sentence-case = फ़िट बिंदु X
.fit-point-y-sentence-case = फ़िट बिंदु Y
.fit-point-z-sentence-case = फ़िट बिंदु Z
.fit-tolerance-sentence-case = फ़िट सहनशीलता
.hide = छिपाएँ
.knot-parameterization-sentence-case = नॉट पैरामीटरीकरण
.number-of-control-points = नियंत्रण बिंदुओं की संख्या
.number-of-fit-points = फ़िट बिंदुओं की संख्या
.periodic = आवर्ती
.square-root = वर्गमूल
.start-tangent-vector-x = आरंभिक स्पर्शरेखा वेक्टर X
.start-tangent-vector-y = आरंभिक स्पर्शरेखा वेक्टर Y
.start-tangent-vector-z = आरंभिक स्पर्शरेखा वेक्टर Z
.uniform = समान
.count-objects-selected = __ocs_arg_count__ ऑब्जेक्ट चयनित
.scope-visual-style = __ocs_arg_scope__ विजुअल स्टाइल
.value-3d-face = 3D फेस
locales/hu-HU/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | tömb | Enter=kész | alap { $x },{ $y }]:
common =
.jogged-radius = Tört sugarú méret
.none-use-shortcuts-set-key-command =(nincs – használat: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Igazítás:
.background-fill-enabled = Háttérkitöltés engedélyezve
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Terület=__ocs_fmt_1__ Kerület=__ocs_fmt_2__ Centroid=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Betöltött többvonal-stílusok: __ocs_fmt_0__
.mline-current-settings = MLINE Jelenlegi beállítások: Igazítás = __ocs_fmt_0__, Méretarány = __ocs_fmt_1__, Stílus = __ocs_fmt_2__
.mline-enter-justification = MLINE Adja meg az igazítást [Felső/Nulla/Alsó] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Adja meg a méretarányt <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Adja meg a stílus nevét vagy [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Adja meg a következő pontot vagy [Bezárás/Visszavonás]:
.mline-specify-next-point-undo = MLINE Adja meg a következő pontot vagy [Visszavonás]:
.multiline-style-was-not-found = A(z) „__ocs_arg_style__” többvonal-stílus nem található.
.donut-specify-second-point-for-inside-diameter = DONUT Adja meg a belső átmérő második pontját:
.donut-specify-second-point-for-outside-diameter = DONUT Adja meg a külső átmérő második pontját:
.spline-specify-first-point = SPLINE Adja meg az első pontot:
.insert-x-no-attributes = __ocs_fmt_0__ beszúrása: nincsenek attribútumok.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Nem található zárt határ.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ objektum(ok) törölve.
modify =
.add-vertex = Csúcspont hozzáadása
.closed-cross = Zárt kereszt
.closed-tee = Zárt T-idom
.corner-joint = Sarokkötés
.cut-all = Összes vágása
.cut-single = Egyetlen vágása
.delete-vertex = Csúcspont törlése
.merged-cross = Egyesített kereszt
.merged-tee = Egyesített T-idom
.mledit-choose-an-edit-tool = MLEDIT Válasszon szerkesztőeszközt:
.mledit-select-first-multiline = MLEDIT Válassza ki az első többvonalat:
.mledit-select-second-multiline = MLEDIT Válassza ki a második többvonalat:
.mledit-specify-end-of-weld-range = MLEDIT Adja meg az összeillesztési tartomány végét:
.mledit-specify-second-cut-point = MLEDIT Adja meg a második vágási pontot:
.open-cross = Nyitott kereszt
.open-tee = Nyitott T-idom
.remove-vertex = Csúcspont eltávolítása
.weld-all = Összes összeillesztése
.count-objects = (__ocs_arg_count__ objektumok)
.edge-extend-indented-title-case = [Ége: meghosszabbítás]
.align-scale-objects-based-on-alignment-points = ALIGN Méretezi az objektumokat igazítási pontok alapján? [Y/N]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: a '__ocs_fmt_1__' stílus nem található.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Adja meg a méretszöveget (üres = mért érték):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Válasszon ívet, kört vagy vonalláncívet:
.dimjogged-specify-center-location-override = DIMJOGGED Adja meg a felülírt középpont helyét:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Adja meg a méretvonal helyét [Bekezdés/Szöveg/Szög]:
.dimjogged-specify-jog-location = DIMJOGGED Adja meg a törés helyét:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Adja meg a szöveg szögét (fok):
.table-cell-enter-text-row-column-current = TABLE CELL Adja meg a szöveget ehhez: [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Adja meg az oszlopszélességet [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Adja meg az adatsorok számát [__ocs_arg_rows__] (__ocs_arg_cols__ oszlop):
.table-enter-row-height-height = TABLE Adja meg a sormagasságot [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Beszúrás módja [Pont/Ablak] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Enter szövegszerkesztő mód [Egyszeres/Többszörös] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Enter új érték a TEXTEDITMODE <__ocs_arg_v__> számára:
.arctext-text-to-place-along-the-arc = Az ív mentén elhelyezendő ARCTEXT szöveg:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Fagyasztás | T <layer> = Felengedés | Enter = Kilépés
view =
.datalink-specify-insertion-point = DATALINK Adja meg a beszúrási pontot:
.table-block-definition-not-found = TABLE: a blokkdefiníció nem található.
.table-edit-applied = TABLE: a módosítás alkalmazva.
.table-field-handle-not-found = TABLE: a mező azonosítója nem található.
.table-row-column-out-of-range-or-cell-locked = TABLE: a sor/oszlop tartományon kívül van, vagy a cella zárolt.
.table-select-a-table-first = TABLE: először válasszon ki egy táblázatot.
.usage-table-edit-actions = Használat: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Kódlap: __ocs_fmt_0__
.created-julian-6 = Létrehozva (Julian): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout =__ocs_fmt_0__ nézetablak(ok) a „__ocs_fmt_1__” elrendezésben:
properties =
.arrowhead-size = Nyílhegy mérete
.attachment = Csatolás
.chord = Húr
.control-point-x-sentence-case = X vezérlőpont
.control-point-y-sentence-case = Y vezérlőpont
.control-point-z-sentence-case = Z vezérlőpont
.control-vertices = Vezérlőcsúcsok
.current-control-point = Jelenlegi vezérlőpont
.current-fit-point = Jelenlegi illesztési pont
.cv-frame = Vezérlőcsúcs-keret
.end-tangent-vector-x = X végérintővektor
.end-tangent-vector-y = Y végérintővektor
.end-tangent-vector-z = Z végérintővektor
.extended-data = Kiterjesztett adatok
.fit-point-x-sentence-case = X illesztési pont
.fit-point-y-sentence-case = Y illesztési pont
.fit-point-z-sentence-case = Z illesztési pont
.fit-tolerance-sentence-case = Illesztési tűrés
.hide = Elrejtés
.knot-parameterization-sentence-case = Csomóparaméterezés
.number-of-control-points = Vezérlőpontok száma
.number-of-fit-points = Illesztési pontok száma
.periodic = Periodikus
.square-root = Négyzetgyök
.start-tangent-vector-x = X kezdő érintővektor
.start-tangent-vector-y = Y kezdő érintővektor
.start-tangent-vector-z = Z kezdő érintővektor
.uniform = Egyenletes
.count-objects-selected = __ocs_arg_count__ objektumok kiválasztva
.scope-visual-style = __ocs_arg_scope__ vizuális stílus
.value-3d-face = 3D-s arc
locales/it-IT/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | Serie | Enter=completato | base { $x },{ $y }]:
common =
.jogged-radius = Raggio spezzato
.none-use-shortcuts-set-key-command =(nessuno — utilizzare: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Allineamento:
.background-fill-enabled = Riempimento dello sfondo abilitato
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Area=__ocs_fmt_1__ Perimetro=__ocs_fmt_2__ Centroide=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Stili multilinea caricati: __ocs_fmt_0__
.mline-current-settings = MLINE Impostazioni correnti: Giustificazione = __ocs_fmt_0__, Scala = __ocs_fmt_1__, Stile = __ocs_fmt_2__
.mline-enter-justification = MLINE Immettere la giustificazione [Superiore/Zero/Inferiore] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Immettere il fattore di scala <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Immettere il nome dello stile o [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Specificare il punto successivo o [Chiudi/Annulla]:
.mline-specify-next-point-undo = MLINE Specificare il punto successivo o [Annulla]:
.multiline-style-was-not-found = Stile multilinea "__ocs_arg_style__" non trovato.
.donut-specify-second-point-for-inside-diameter = DONUT Specificare il secondo punto del diametro interno:
.donut-specify-second-point-for-outside-diameter = DONUT Specificare il secondo punto del diametro esterno:
.spline-specify-first-point = SPLINE Specificare il primo punto:
.insert-x-no-attributes = Inserisci __ocs_fmt_0__: nessun attributo.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Nessun confine chiuso trovato.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ oggetto/i cancellati.
modify =
.add-vertex = Aggiungi vertice
.closed-cross = Croce chiusa
.closed-tee = T chiusa
.corner-joint = Giunto d’angolo
.cut-all = Taglia tutto
.cut-single = Taglio singolo
.delete-vertex = Elimina vertice
.merged-cross = Croce unita
.merged-tee = T unita
.mledit-choose-an-edit-tool = MLEDIT Scegliere uno strumento di modifica:
.mledit-select-first-multiline = MLEDIT Selezionare la prima multilinea:
.mledit-select-second-multiline = MLEDIT Selezionare la seconda multilinea:
.mledit-specify-end-of-weld-range = MLEDIT Specificare la fine dell’intervallo di unione:
.mledit-specify-second-cut-point = MLEDIT Specificare il secondo punto di taglio:
.open-cross = Croce aperta
.open-tee = T aperta
.remove-vertex = Rimuovi vertice
.weld-all = Unisci tutto
.count-objects = (oggetti __ocs_arg_count__)
.edge-extend-indented-title-case = [Bordo: Estendi]
.align-scale-objects-based-on-alignment-points = ALIGN Scalare gli oggetti in base ai punti di allineamento? [Y/N]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: stile '__ocs_fmt_1__' non trovato.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Immettere il testo della quota (vuoto = valore misurato):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Selezionare un arco, un cerchio o un arco di polilinea:
.dimjogged-specify-center-location-override = DIMJOGGED Specificare la posizione alternativa del centro:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Specificare la posizione della linea di quota [TestoM/Testo/Angolo]:
.dimjogged-specify-jog-location = DIMJOGGED Specificare la posizione dello spezzamento:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Specificare l’angolo del testo (gradi):
.table-cell-enter-text-row-column-current = TABLE CELL Immettere il testo per [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Immettere la larghezza della colonna [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Immettere il numero di righe dati [__ocs_arg_rows__] (__ocs_arg_cols__ colonne):
.table-enter-row-height-height = TABLE Immettere l’altezza della riga [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Modalità di inserimento [Punto/Finestra] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Enter modalità di modifica del testo [Singola/Multipla] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Enter nuovo valore per TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT testo da posizionare lungo l'arco:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Congela | T <layer> = Scongela | Enter = Esci
view =
.datalink-specify-insertion-point = DATALINK Specificare il punto di inserimento:
.table-block-definition-not-found = TABLE: definizione del blocco non trovata.
.table-edit-applied = TABLE: modifica applicata.
.table-field-handle-not-found = TABLE: handle del campo non trovato.
.table-row-column-out-of-range-or-cell-locked = TABLE: riga/colonna fuori intervallo o cella bloccata.
.table-select-a-table-first = TABLE: selezionare prima una tabella.
.usage-table-edit-actions = Uso: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Tabella codici: __ocs_fmt_0__
.created-julian-6 = Creato (Julian): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout =Finestre __ocs_fmt_0__ nel layout "__ocs_fmt_1__":
properties =
.arrowhead-size = Dimensione punta freccia
.attachment = Collegamento
.chord = Corda
.control-point-x-sentence-case = Punto di controllo X
.control-point-y-sentence-case = Punto di controllo Y
.control-point-z-sentence-case = Punto di controllo Z
.control-vertices = Vertici di controllo
.current-control-point = Punto di controllo corrente
.current-fit-point = Punto di adattamento corrente
.cv-frame = Cornice VC
.end-tangent-vector-x = Vettore tangente finale X
.end-tangent-vector-y = Vettore tangente finale Y
.end-tangent-vector-z = Vettore tangente finale Z
.extended-data = Dati estesi
.fit-point-x-sentence-case = Punto di adattamento X
.fit-point-y-sentence-case = Punto di adattamento Y
.fit-point-z-sentence-case = Punto di adattamento Z
.fit-tolerance-sentence-case = Tolleranza di adattamento
.hide = Nascondi
.knot-parameterization-sentence-case = Parametrizzazione dei nodi
.number-of-control-points = Numero di punti di controllo
.number-of-fit-points = Numero di punti di adattamento
.periodic = Periodica
.square-root = Radice quadrata
.start-tangent-vector-x = Vettore tangente iniziale X
.start-tangent-vector-y = Vettore tangente iniziale Y
.start-tangent-vector-z = Vettore tangente iniziale Z
.uniform = Uniforme
.count-objects-selected = __ocs_arg_count__ oggetti selezionati
.scope-visual-style = __ocs_arg_scope__ Stile visivo
.value-3d-face = Volto 3D
locales/ja-JP/opencadstudio.ftl
+76
View File
@@ -226,6 +226,7 @@ command-copy =
.target = COPY 移動先を指定 [これまでに { $count } 個複写 | 配列 | Enter=完了 | 基点 { $x },{ $y }]:
common =
.jogged-radius = 折れ曲がり半径
.none-use-shortcuts-set-key-command = （なし — SHORTCUTS SET <key> <command> を使用）
.alignment-indented-label-title-case = 配置:
.background-fill-enabled = 背景塗り潰しを有効化
@@ -1157,6 +1158,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ 面積=__ocs_fmt_1__ 周長=__ocs_fmt_2__ 図心=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = 読み込まれたマルチラインスタイル: __ocs_fmt_0__
.mline-current-settings = MLINE 現在の設定: 位置合わせ = __ocs_fmt_0__、尺度 = __ocs_fmt_1__、スタイル = __ocs_fmt_2__
.mline-enter-justification = MLINE 位置合わせの種類を入力 [上/ゼロ/下] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE 尺度係数を入力 <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE スタイル名または [?] を入力 <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE 次の点を指定 または [閉じる/元に戻す]:
.mline-specify-next-point-undo = MLINE 次の点を指定 または [元に戻す]:
.multiline-style-was-not-found = マルチラインスタイル「__ocs_arg_style__」が見つかりません。
.donut-specify-second-point-for-inside-diameter = DONUT 内径の2点目を指定:
.donut-specify-second-point-for-outside-diameter = DONUT 外径の2点目を指定:
.spline-specify-first-point = SPLINE 最初の点を指定:
.insert-x-no-attributes = 挿入 __ocs_fmt_0__: 属性なし。
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ 閉じた境界が見つかりません。
@@ -1440,6 +1452,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ 個のオブジェクトを削除しました。
modify =
.add-vertex = 頂点を追加
.closed-cross = 閉じた交差
.closed-tee = 閉じたT字
.corner-joint = コーナージョイント
.cut-all = すべて切断
.cut-single = 単一切断
.delete-vertex = 頂点を削除
.merged-cross = 結合交差
.merged-tee = 結合T字
.mledit-choose-an-edit-tool = MLEDIT 編集ツールを選択:
.mledit-select-first-multiline = MLEDIT 1本目のマルチラインを選択:
.mledit-select-second-multiline = MLEDIT 2本目のマルチラインを選択:
.mledit-specify-end-of-weld-range = MLEDIT 結合範囲の終点を指定:
.mledit-specify-second-cut-point = MLEDIT 2つ目の切断点を指定:
.open-cross = 開いた交差
.open-tee = 開いたT字
.remove-vertex = 頂点を除去
.weld-all = すべて結合
.count-objects = （__ocs_arg_count__ 個のオブジェクト）
.edge-extend-indented-title-case = [エッジ: 延長]
.align-scale-objects-based-on-alignment-points = ALIGN 位置合わせ点に基づいてオブジェクトを尺度変更しますか？ [はい/いいえ]:
@@ -1776,6 +1806,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: スタイル「__ocs_fmt_1__」が見つかりません。
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED 寸法値を入力 (空欄 = 計測値):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED 円弧、円、またはポリライン円弧を選択:
.dimjogged-specify-center-location-override = DIMJOGGED 中心位置の変更先を指定:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED 寸法線の位置を指定 [マルチテキスト/テキスト/角度]:
.dimjogged-specify-jog-location = DIMJOGGED 折れ曲がり位置を指定:
.dimjogged-specify-text-angle-degrees = DIMJOGGED 文字角度 (度) を指定:
.table-cell-enter-text-row-column-current = TABLE CELL セル [__ocs_arg_row__,__ocs_arg_column__] の文字列を入力 <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE 列幅を入力 [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE データ行数を入力 [__ocs_arg_rows__] (__ocs_arg_cols__ 列):
.table-enter-row-height-height = TABLE 行の高さを入力 [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE 挿入方法 [点/窓] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT 文字編集モードを入力 [単一/複数] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE TEXTEDITMODE の新しい値を入力 <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT 円弧に沿って配置する文字:
@@ -2136,6 +2177,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = フリーズ | T <layer> = フリーズ解除 | Enter = 終了
view =
.datalink-specify-insertion-point = DATALINK 挿入点を指定:
.table-block-definition-not-found = TABLE: ブロック定義が見つかりません。
.table-edit-applied = TABLE: 編集を適用しました。
.table-field-handle-not-found = TABLE: フィールドハンドルが見つかりません。
.table-row-column-out-of-range-or-cell-locked = TABLE: 行/列が範囲外か、セルがロックされています。
.table-select-a-table-first = TABLE: 最初に表を選択してください。
.usage-table-edit-actions = 使用法: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = コードページ: __ocs_fmt_0__
.created-julian-6 = 作成日（ユリウス日）: __ocs_fmt_0__
@@ -2352,6 +2400,34 @@ view =
.viewport-s-in-layout = レイアウト「__ocs_fmt_1__」内の __ocs_fmt_0__ 個のビューポート:
properties =
.arrowhead-size = 矢印の先端サイズ
.attachment = アタッチ
.chord = 弦
.control-point-x-sentence-case = 制御点 X
.control-point-y-sentence-case = 制御点 Y
.control-point-z-sentence-case = 制御点 Z
.control-vertices = 制御頂点
.current-control-point = 現在の制御点
.current-fit-point = 現在のフィット点
.cv-frame = CVフレーム
.end-tangent-vector-x = 終点接線ベクトル X
.end-tangent-vector-y = 終点接線ベクトル Y
.end-tangent-vector-z = 終点接線ベクトル Z
.extended-data = 拡張データ
.fit-point-x-sentence-case = フィット点 X
.fit-point-y-sentence-case = フィット点 Y
.fit-point-z-sentence-case = フィット点 Z
.fit-tolerance-sentence-case = フィット許容差
.hide = 非表示
.knot-parameterization-sentence-case = ノットのパラメータ化
.number-of-control-points = 制御点の数
.number-of-fit-points = フィット点の数
.periodic = 周期
.square-root = 平方根
.start-tangent-vector-x = 始点接線ベクトル X
.start-tangent-vector-y = 始点接線ベクトル Y
.start-tangent-vector-z = 始点接線ベクトル Z
.uniform = 均一
.count-objects-selected = __ocs_arg_count__ 個のオブジェクトを選択
.scope-visual-style = __ocs_arg_scope__ 表示スタイル
.value-3d-face = 3D 面
locales/ko-KR/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | 배열 | Enter=완료 | 베이스 { $x },{ $y }]:
common =
.jogged-radius = 꺾인 반지름
.none-use-shortcuts-set-key-command = (없음 — 사용: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case =정렬:
.background-fill-enabled = 배경 채우기 활성화됨
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ 면적=__ocs_fmt_1__ 둘레=__ocs_fmt_2__ 중심=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = 불러온 다중선 스타일: __ocs_fmt_0__
.mline-current-settings = MLINE 현재 설정: 정렬 = __ocs_fmt_0__, 축척 = __ocs_fmt_1__, 스타일 = __ocs_fmt_2__
.mline-enter-justification = MLINE 정렬 유형 입력 [위/영/아래] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE 축척 비율 입력 <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE 스타일 이름 또는 [?] 입력 <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE 다음 점 지정 또는 [닫기/실행 취소]:
.mline-specify-next-point-undo = MLINE 다음 점 지정 또는 [실행 취소]:
.multiline-style-was-not-found = 다중선 스타일 “__ocs_arg_style__”을(를) 찾을 수 없습니다.
.donut-specify-second-point-for-inside-diameter = DONUT 안쪽 지름의 두 번째 점 지정:
.donut-specify-second-point-for-outside-diameter = DONUT 바깥쪽 지름의 두 번째 점 지정:
.spline-specify-first-point = SPLINE 첫 번째 점 지정:
.insert-x-no-attributes = __ocs_fmt_0__ 삽입: 속성이 없습니다.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ 닫힌 경계를 찾을 수 없습니다.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ 개체가 지워졌습니다.
modify =
.add-vertex = 정점 추가
.closed-cross = 닫힌 십자
.closed-tee = 닫힌 T자
.corner-joint = 모서리 접합
.cut-all = 모두 자르기
.cut-single = 하나 자르기
.delete-vertex = 정점 삭제
.merged-cross = 병합된 십자
.merged-tee = 병합된 T자
.mledit-choose-an-edit-tool = MLEDIT 편집 도구 선택:
.mledit-select-first-multiline = MLEDIT 첫 번째 다중선 선택:
.mledit-select-second-multiline = MLEDIT 두 번째 다중선 선택:
.mledit-specify-end-of-weld-range = MLEDIT 접합 범위의 끝 지정:
.mledit-specify-second-cut-point = MLEDIT 두 번째 자르기 점 지정:
.open-cross = 열린 십자
.open-tee = 열린 T자
.remove-vertex = 정점 제거
.weld-all = 모두 접합
.count-objects = (__ocs_arg_count__ 객체)
.edge-extend-indented-title-case = [엣지: 확장]
.align-scale-objects-based-on-alignment-points = ALIGN 정렬 지점을 기준으로 개체 크기를 조정하시겠습니까? [Y/N]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: '__ocs_fmt_1__' 스타일을 찾을 수 없습니다.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED 치수 문자 입력 (비워 두면 측정값):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED 호, 원 또는 폴리선 호 선택:
.dimjogged-specify-center-location-override = DIMJOGGED 중심 위치 재지정:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED 치수선 위치 지정 [여러 줄 문자/문자/각도]:
.dimjogged-specify-jog-location = DIMJOGGED 꺾임 위치 지정:
.dimjogged-specify-text-angle-degrees = DIMJOGGED 문자 각도 (도) 지정:
.table-cell-enter-text-row-column-current = TABLE CELL 셀 [__ocs_arg_row__,__ocs_arg_column__]의 문자 입력 <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE 열 너비 입력 [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE 데이터 행 수 입력 [__ocs_arg_rows__] (__ocs_arg_cols__열):
.table-enter-row-height-height = TABLE 행 높이 입력 [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE 삽입 방식 [점/윈도우] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Enter 텍스트 편집 모드 [단일/다중] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Enter TEXTEDITMODE <__ocs_arg_v__>의 새 값:
.arctext-text-to-place-along-the-arc = 호를 따라 배치할 ARCTEXT 문자:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = 동결 | T <layer> = 해동 | Enter = 종료
view =
.datalink-specify-insertion-point = DATALINK 삽입점 지정:
.table-block-definition-not-found = TABLE: 블록 정의를 찾을 수 없습니다.
.table-edit-applied = TABLE: 편집을 적용했습니다.
.table-field-handle-not-found = TABLE: 필드 핸들을 찾을 수 없습니다.
.table-row-column-out-of-range-or-cell-locked = TABLE: 행/열이 범위를 벗어났거나 셀이 잠겨 있습니다.
.table-select-a-table-first = TABLE: 먼저 테이블을 선택하십시오.
.usage-table-edit-actions = 사용법: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = 코드 페이지: __ocs_fmt_0__
.created-julian-6 = 생성됨(줄리안): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout ="__ocs_fmt_1__" 레이아웃의 __ocs_fmt_0__ 뷰포트:
properties =
.arrowhead-size = 화살촉 크기
.attachment = 부착
.chord = 현
.control-point-x-sentence-case = 조정점 X
.control-point-y-sentence-case = 조정점 Y
.control-point-z-sentence-case = 조정점 Z
.control-vertices = 조정 정점
.current-control-point = 현재 조정점
.current-fit-point = 현재 맞춤점
.cv-frame = CV 프레임
.end-tangent-vector-x = 끝 접선 벡터 X
.end-tangent-vector-y = 끝 접선 벡터 Y
.end-tangent-vector-z = 끝 접선 벡터 Z
.extended-data = 확장 데이터
.fit-point-x-sentence-case = 맞춤점 X
.fit-point-y-sentence-case = 맞춤점 Y
.fit-point-z-sentence-case = 맞춤점 Z
.fit-tolerance-sentence-case = 맞춤 공차
.hide = 숨기기
.knot-parameterization-sentence-case = 매듭 매개변수화
.number-of-control-points = 조정점 수
.number-of-fit-points = 맞춤점 수
.periodic = 주기
.square-root = 제곱근
.start-tangent-vector-x = 시작 접선 벡터 X
.start-tangent-vector-y = 시작 접선 벡터 Y
.start-tangent-vector-z = 시작 접선 벡터 Z
.uniform = 균일
.count-objects-selected = __ocs_arg_count__ 개체가 선택됨
.scope-visual-style = __ocs_arg_scope__ 비주얼 스타일
.value-3d-face = 3D 얼굴
locales/nl-NL/opencadstudio.ftl
+76
View File
@@ -236,6 +236,7 @@ command-copy =
} | Reeks | Enter=gereed | basis { $x },{ $y }]:
common =
.jogged-radius = Geknikte straal
.none-use-shortcuts-set-key-command = (geen gebruik: SHORTCUTS SET <toets> <opdracht>)
.alignment-indented-label-title-case = Uitlijning:
.background-fill-enabled = Achtergrond vullen ingeschakeld
@@ -1167,6 +1168,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Area=__ocs_fmt_1__ Perimeter=__ocs_fmt_2__ Centroid=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Geladen multilijnstijlen: __ocs_fmt_0__
.mline-current-settings = MLINE Huidige instellingen: Uitlijning = __ocs_fmt_0__, Schaal = __ocs_fmt_1__, Stijl = __ocs_fmt_2__
.mline-enter-justification = MLINE Voer uitlijning in [Boven/Nul/Onder] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Voer schaalfactor in <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Voer stijlnaam of [?] in <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Geef volgend punt op of [Sluiten/Ongedaan maken]:
.mline-specify-next-point-undo = MLINE Geef volgend punt op of [Ongedaan maken]:
.multiline-style-was-not-found = Multilijnstijl ‘__ocs_arg_style__’ is niet gevonden.
.donut-specify-second-point-for-inside-diameter = DONUT Geef tweede punt voor binnendiameter op:
.donut-specify-second-point-for-outside-diameter = DONUT Geef tweede punt voor buitendiameter op:
.spline-specify-first-point = SPLINE Geef eerste punt op:
.insert-x-no-attributes = __ocs_fmt_0__ invoegen: geen attributen.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Geen gesloten grens gevonden.
@@ -1450,6 +1462,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ object(en) gewist.
modify =
.add-vertex = Hoekpunt toevoegen
.closed-cross = Gesloten kruis
.closed-tee = Gesloten T-stuk
.corner-joint = Hoekverbinding
.cut-all = Alles snijden
.cut-single = Enkel snijden
.delete-vertex = Hoekpunt verwijderen
.merged-cross = Samengevoegd kruis
.merged-tee = Samengevoegd T-stuk
.mledit-choose-an-edit-tool = MLEDIT Kies een bewerkingsgereedschap:
.mledit-select-first-multiline = MLEDIT Selecteer de eerste multilijn:
.mledit-select-second-multiline = MLEDIT Selecteer de tweede multilijn:
.mledit-specify-end-of-weld-range = MLEDIT Geef het einde van het lasbereik op:
.mledit-specify-second-cut-point = MLEDIT Geef het tweede snijpunt op:
.open-cross = Open kruis
.open-tee = Open T-stuk
.remove-vertex = Hoekpunt wegnemen
.weld-all = Alles lassen
.count-objects = (__ocs_arg_count__ objecten)
.edge-extend-indented-title-case = [Rand: Verlengen]
.align-scale-objects-based-on-alignment-points = ALIGN Objecten schalen op basis van uitlijnpunten? [Y/N]:
@@ -1786,6 +1816,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: stijl '__ocs_fmt_1__' niet gevonden.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Voer maattekst in (leeg = gemeten waarde):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Selecteer boog, cirkel of polylijnboog:
.dimjogged-specify-center-location-override = DIMJOGGED Geef alternatieve middelpuntlocatie op:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Geef locatie van maatlijn op [Mtekst/Tekst/Hoek]:
.dimjogged-specify-jog-location = DIMJOGGED Geef kniklocatie op:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Geef teksthoek op (graden):
.table-cell-enter-text-row-column-current = TABLE CELL Voer tekst in voor [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Voer kolombreedte in [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Voer aantal gegevensrijen in [__ocs_arg_rows__] (__ocs_arg_cols__ kolommen):
.table-enter-row-height-height = TABLE Voer rijhoogte in [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Invoeggedrag [Punt/Venster] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Voer tekstbewerkingsmodus [Single/Multiple] <__ocs_arg_mode__> in:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Geef nieuwe waarde voor TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT tekst die langs de boog moet worden geplaatst:
@@ -2148,6 +2189,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <laag> = Bevriezen | T <laag> = Ontdooien | Enter = Afsluiten
view =
.datalink-specify-insertion-point = DATALINK Geef invoegpunt op:
.table-block-definition-not-found = TABLE: blokdefinitie niet gevonden.
.table-edit-applied = TABLE: bewerking toegepast.
.table-field-handle-not-found = TABLE: veldhandle niet gevonden.
.table-row-column-out-of-range-or-cell-locked = TABLE: rij/kolom ligt buiten bereik of de cel is vergrendeld.
.table-select-a-table-first = TABLE: selecteer eerst een tabel.
.usage-table-edit-actions = Gebruik: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Codepagina: __ocs_fmt_0__
.created-julian-6 = Aangemaakt (Julian): __ocs_fmt_0__
@@ -2364,6 +2412,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ weergavevenster(s) in indeling "__ocs_fmt_1__":
properties =
.arrowhead-size = Pijlpuntgrootte
.attachment = Koppeling
.chord = Koorde
.control-point-x-sentence-case = Controlepunt X
.control-point-y-sentence-case = Controlepunt Y
.control-point-z-sentence-case = Controlepunt Z
.control-vertices = Controlehoekpunten
.current-control-point = Huidig controlepunt
.current-fit-point = Huidig aanpassingspunt
.cv-frame = CV-kader
.end-tangent-vector-x = Eindraakvector X
.end-tangent-vector-y = Eindraakvector Y
.end-tangent-vector-z = Eindraakvector Z
.extended-data = Uitgebreide gegevens
.fit-point-x-sentence-case = Aanpassingspunt X
.fit-point-y-sentence-case = Aanpassingspunt Y
.fit-point-z-sentence-case = Aanpassingspunt Z
.fit-tolerance-sentence-case = Aanpassingstolerantie
.hide = Verbergen
.knot-parameterization-sentence-case = Knoopparametrisering
.number-of-control-points = Aantal controlepunten
.number-of-fit-points = Aantal aanpassingspunten
.periodic = Periodiek
.square-root = Vierkantswortel
.start-tangent-vector-x = Beginraakvector X
.start-tangent-vector-y = Beginraakvector Y
.start-tangent-vector-z = Beginraakvector Z
.uniform = Gelijkmatig
.count-objects-selected = __ocs_arg_count__ objecten geselecteerd
.scope-visual-style = __ocs_arg_scope__ Visuele stijl
.value-3d-face = 3D gezicht
locales/pl-PL/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | Tablica | Enter=gotowe | baza { $x },{ $y }]:
common =
.jogged-radius = Promień łamany
.none-use-shortcuts-set-key-command =(brak — użyj: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Wyrównanie:
.background-fill-enabled = Wypełnianie tła włączone
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Powierzchnia=__ocs_fmt_1__ Obwód=__ocs_fmt_2__ Środek ciężkości=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Wczytane style multilinii: __ocs_fmt_0__
.mline-current-settings = MLINE Bieżące ustawienia: Wyrównanie = __ocs_fmt_0__, Skala = __ocs_fmt_1__, Styl = __ocs_fmt_2__
.mline-enter-justification = MLINE Wprowadź wyrównanie [Góra/Zero/Dół] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Wprowadź współczynnik skali <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Wprowadź nazwę stylu lub [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Wskaż następny punkt lub [Zamknij/Cofnij]:
.mline-specify-next-point-undo = MLINE Wskaż następny punkt lub [Cofnij]:
.multiline-style-was-not-found = Nie znaleziono stylu multilinii „__ocs_arg_style__”.
.donut-specify-second-point-for-inside-diameter = DONUT Wskaż drugi punkt średnicy wewnętrznej:
.donut-specify-second-point-for-outside-diameter = DONUT Wskaż drugi punkt średnicy zewnętrznej:
.spline-specify-first-point = SPLINE Wskaż pierwszy punkt:
.insert-x-no-attributes = Wstaw __ocs_fmt_0__: brak atrybutów.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Nie znaleziono zamkniętej granicy.
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = Obiekt(y) __ocs_fmt_0__ został usunięty.
modify =
.add-vertex = Dodaj wierzchołek
.closed-cross = Zamknięte skrzyżowanie
.closed-tee = Zamknięte połączenie T
.corner-joint = Połączenie narożne
.cut-all = Przytnij wszystko
.cut-single = Przytnij pojedynczo
.delete-vertex = Usuń wierzchołek
.merged-cross = Scalane skrzyżowanie
.merged-tee = Scalane połączenie T
.mledit-choose-an-edit-tool = MLEDIT Wybierz narzędzie edycji:
.mledit-select-first-multiline = MLEDIT Wybierz pierwszą multilinię:
.mledit-select-second-multiline = MLEDIT Wybierz drugą multilinię:
.mledit-specify-end-of-weld-range = MLEDIT Wskaż koniec zakresu łączenia:
.mledit-specify-second-cut-point = MLEDIT Wskaż drugi punkt cięcia:
.open-cross = Otwarte skrzyżowanie
.open-tee = Otwarte połączenie T
.remove-vertex = Odejmij wierzchołek
.weld-all = Połącz wszystko
.count-objects = (obiekty __ocs_arg_count__)
.edge-extend-indented-title-case = [Krawędź: Rozszerz]
.align-scale-objects-based-on-alignment-points = ALIGN Skalować obiekty na podstawie punktów wyrównania? [Y/N]:
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: nie znaleziono stylu „__ocs_fmt_1__”.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Wprowadź tekst wymiaru (puste = wartość zmierzona):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Wybierz łuk, okrąg lub łuk polilinii:
.dimjogged-specify-center-location-override = DIMJOGGED Wskaż zastępcze położenie środka:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Wskaż położenie linii wymiarowej [Wtekst/Tekst/Kąt]:
.dimjogged-specify-jog-location = DIMJOGGED Wskaż położenie załamania:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Wskaż kąt tekstu (stopnie):
.table-cell-enter-text-row-column-current = TABLE CELL Wprowadź tekst dla [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Wprowadź szerokość kolumny [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Wprowadź liczbę wierszy danych [__ocs_arg_rows__] (kolumn: __ocs_arg_cols__):
.table-enter-row-height-height = TABLE Wprowadź wysokość wiersza [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Sposób wstawiania [Punkt/Okno] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Enter tryb edycji tekstu [Pojedynczy/Wiele] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Enter nowa wartość dla TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = Tekst ARCTEXT do umieszczenia wzdłuż łuku:
@@ -2147,6 +2188,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <layer> = Zamrożenie | T <layer> = Odwilż | Enter = Wyjście
view =
.datalink-specify-insertion-point = DATALINK Wskaż punkt wstawienia:
.table-block-definition-not-found = TABLE: nie znaleziono definicji bloku.
.table-edit-applied = TABLE: zastosowano edycję.
.table-field-handle-not-found = TABLE: nie znaleziono uchwytu pola.
.table-row-column-out-of-range-or-cell-locked = TABLE: wiersz/kolumna poza zakresem lub komórka jest zablokowana.
.table-select-a-table-first = TABLE: najpierw wybierz tabelę.
.usage-table-edit-actions = Użycie: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Strona kodowa: __ocs_fmt_0__
.created-julian-6 = Utworzono (Julian): __ocs_fmt_0__
@@ -2363,6 +2411,34 @@ view =
.viewport-s-in-layout =Okna widokowe __ocs_fmt_0__ w układzie „__ocs_fmt_1__”:
properties =
.arrowhead-size = Rozmiar grotu strzałki
.attachment = Dołączenie
.chord = Cięciwa
.control-point-x-sentence-case = Punkt sterujący X
.control-point-y-sentence-case = Punkt sterujący Y
.control-point-z-sentence-case = Punkt sterujący Z
.control-vertices = Wierzchołki sterujące
.current-control-point = Bieżący punkt sterujący
.current-fit-point = Bieżący punkt dopasowania
.cv-frame = Ramka WS
.end-tangent-vector-x = Końcowy wektor styczny X
.end-tangent-vector-y = Końcowy wektor styczny Y
.end-tangent-vector-z = Końcowy wektor styczny Z
.extended-data = Dane rozszerzone
.fit-point-x-sentence-case = Punkt dopasowania X
.fit-point-y-sentence-case = Punkt dopasowania Y
.fit-point-z-sentence-case = Punkt dopasowania Z
.fit-tolerance-sentence-case = Tolerancja dopasowania
.hide = Ukryj
.knot-parameterization-sentence-case = Parametryzacja węzłów
.number-of-control-points = Liczba punktów sterujących
.number-of-fit-points = Liczba punktów dopasowania
.periodic = Okresowa
.square-root = Pierwiastek kwadratowy
.start-tangent-vector-x = Początkowy wektor styczny X
.start-tangent-vector-y = Początkowy wektor styczny Y
.start-tangent-vector-z = Początkowy wektor styczny Z
.uniform = Jednorodna
.count-objects-selected = Wybrano obiekty __ocs_arg_count__
.scope-visual-style = Styl wizualny __ocs_arg_scope__
.value-3d-face = Twarz 3D
locales/pt-BR/opencadstudio.ftl
+76
View File
@@ -236,6 +236,7 @@ command-copy =
} | Matriz | Enter=concluir | base { $x },{ $y }]:
common =
.jogged-radius = Raio com desvio
.none-use-shortcuts-set-key-command = (nenhum — use: SHORTCUTS SET <tecla> <comando>)
.alignment-indented-label-title-case = Alinhamento:
.background-fill-enabled = Preenchimento de fundo ativado
@@ -1167,6 +1168,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Área=__ocs_fmt_1__ Perímetro=__ocs_fmt_2__ Centroide=(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Estilos de multilinha carregados: __ocs_fmt_0__
.mline-current-settings = MLINE Configurações atuais: Justificação = __ocs_fmt_0__, Escala = __ocs_fmt_1__, Estilo = __ocs_fmt_2__
.mline-enter-justification = MLINE Informe a justificação [Superior/Zero/Inferior] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Informe o fator de escala <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Informe o nome do estilo ou [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Especifique o próximo ponto ou [Fechar/Desfazer]:
.mline-specify-next-point-undo = MLINE Especifique o próximo ponto ou [Desfazer]:
.multiline-style-was-not-found = O estilo de multilinha "__ocs_arg_style__" não foi encontrado.
.donut-specify-second-point-for-inside-diameter = DONUT Especifique o segundo ponto do diâmetro interno:
.donut-specify-second-point-for-outside-diameter = DONUT Especifique o segundo ponto do diâmetro externo:
.spline-specify-first-point = SPLINE Especifique o primeiro ponto:
.insert-x-no-attributes = Inserção __ocs_fmt_0__: sem atributos.
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Nenhum limite fechado encontrado.
@@ -1450,6 +1462,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ objetos apagados.
modify =
.add-vertex = Adicionar vértice
.closed-cross = Cruz fechada
.closed-tee = T fechado
.corner-joint = Junção de canto
.cut-all = Cortar tudo
.cut-single = Corte único
.delete-vertex = Excluir vértice
.merged-cross = Cruz mesclada
.merged-tee = T mesclado
.mledit-choose-an-edit-tool = MLEDIT Escolha uma ferramenta de edição:
.mledit-select-first-multiline = MLEDIT Selecione a primeira multilinha:
.mledit-select-second-multiline = MLEDIT Selecione a segunda multilinha:
.mledit-specify-end-of-weld-range = MLEDIT Especifique o fim do intervalo de união:
.mledit-specify-second-cut-point = MLEDIT Especifique o segundo ponto de corte:
.open-cross = Cruz aberta
.open-tee = T aberto
.remove-vertex = Remover vértice
.weld-all = Unir tudo
.count-objects = (__ocs_arg_count__ objetos)
.edge-extend-indented-title-case = [Aresta: Estender]
.align-scale-objects-based-on-alignment-points = ALIGN Escalar objetos com base nos pontos de alinhamento? [S/N]:
@@ -1786,6 +1816,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: o estilo “__ocs_fmt_1__” não foi encontrado.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Informe o texto da cota (vazio = valor medido):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Selecione um arco, círculo ou arco de polilinha:
.dimjogged-specify-center-location-override = DIMJOGGED Especifique a posição alternativa do centro:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Especifique a posição da linha de cota [TextoM/Texto/Ângulo]:
.dimjogged-specify-jog-location = DIMJOGGED Especifique a posição do desvio:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Especifique o ângulo do texto (graus):
.table-cell-enter-text-row-column-current = TABLE CELL Informe o texto para [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Informe a largura da coluna [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Informe o número de linhas de dados [__ocs_arg_rows__] (__ocs_arg_cols__ colunas):
.table-enter-row-height-height = TABLE Informe a altura da linha [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Comportamento de inserção [Ponto/Janela] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Entre no modo de edição de texto [Único/Múltiplo] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Insira o novo valor de TEXTEDITMODE <__ocs_arg_v__>:
.arctext-text-to-place-along-the-arc = ARCTEXT texto a colocar ao longo do arco:
@@ -2148,6 +2189,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <camada> = Congelar | T <camada> = Descongelar | Enter = Sair
view =
.datalink-specify-insertion-point = DATALINK Especifique o ponto de inserção:
.table-block-definition-not-found = TABLE: definição de bloco não encontrada.
.table-edit-applied = TABLE: edição aplicada.
.table-field-handle-not-found = TABLE: identificador de campo não encontrado.
.table-row-column-out-of-range-or-cell-locked = TABLE: linha/coluna fora do intervalo ou célula bloqueada.
.table-select-a-table-first = TABLE: selecione primeiro uma tabela.
.usage-table-edit-actions = Uso: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Página de código: __ocs_fmt_0__
.created-julian-6 = Criado (Juliano): __ocs_fmt_0__
@@ -2364,6 +2412,34 @@ view =
.viewport-s-in-layout = __ocs_fmt_0__ janelas de visualização no layout “__ocs_fmt_1__”:
properties =
.arrowhead-size = Tamanho da ponta da seta
.attachment = Anexação
.chord = Corda
.control-point-x-sentence-case = Ponto de controle X
.control-point-y-sentence-case = Ponto de controle Y
.control-point-z-sentence-case = Ponto de controle Z
.control-vertices = Vértices de controle
.current-control-point = Ponto de controle atual
.current-fit-point = Ponto de ajuste atual
.cv-frame = Quadro de VC
.end-tangent-vector-x = Vetor tangente final X
.end-tangent-vector-y = Vetor tangente final Y
.end-tangent-vector-z = Vetor tangente final Z
.extended-data = Dados estendidos
.fit-point-x-sentence-case = Ponto de ajuste X
.fit-point-y-sentence-case = Ponto de ajuste Y
.fit-point-z-sentence-case = Ponto de ajuste Z
.fit-tolerance-sentence-case = Tolerância de ajuste
.hide = Ocultar
.knot-parameterization-sentence-case = Parametrização de nós
.number-of-control-points = Número de pontos de controle
.number-of-fit-points = Número de pontos de ajuste
.periodic = Periódica
.square-root = Raiz quadrada
.start-tangent-vector-x = Vetor tangente inicial X
.start-tangent-vector-y = Vetor tangente inicial Y
.start-tangent-vector-z = Vetor tangente inicial Z
.uniform = Uniforme
.count-objects-selected = __ocs_arg_count__ objetos selecionados
.scope-visual-style = Estilo visual de __ocs_arg_scope__
.value-3d-face = Face 3D
locales/ru-RU/opencadstudio.ftl
+76
View File
@@ -239,6 +239,7 @@ command-copy =
} | Массив | Enter=готово | база { $x },{ $y }]:
common =
.jogged-radius = Радиус с изломом
.none-use-shortcuts-set-key-command = (нет — используйте: SHORTCUTS SET <key> <command>)
.alignment-indented-label-title-case = Выравнивание:
.background-fill-enabled = Заполненный фон включен
@@ -1170,6 +1171,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ Площадь =__ocs_fmt_1__ Периметр =__ocs_fmt_2__ Центроид =(__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = Загруженные стили мультилиний: __ocs_fmt_0__
.mline-current-settings = MLINE Текущие параметры: Выравнивание = __ocs_fmt_0__, Масштаб = __ocs_fmt_1__, Стиль = __ocs_fmt_2__
.mline-enter-justification = MLINE Введите выравнивание [Сверху/Ноль/Снизу] <__ocs_fmt_0__>:
.mline-enter-scale-factor-default = MLINE Введите масштабный коэффициент <__ocs_fmt_0__>:
.mline-enter-style-name = MLINE Введите имя стиля или [?] <__ocs_fmt_0__>:
.mline-specify-next-point-close-undo = MLINE Укажите следующую точку или [Замкнуть/Отменить]:
.mline-specify-next-point-undo = MLINE Укажите следующую точку или [Отменить]:
.multiline-style-was-not-found = Стиль мультилинии «__ocs_arg_style__» не найден.
.donut-specify-second-point-for-inside-diameter = DONUT Укажите вторую точку внутреннего диаметра:
.donut-specify-second-point-for-outside-diameter = DONUT Укажите вторую точку внешнего диаметра:
.spline-specify-first-point = SPLINE Укажите первую точку:
.insert-x-no-attributes = Вставить __ocs_fmt_0__: никаких атрибутов.
.tag-val = [__ocs_fmt_0__ = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ Замкнутая граница не найдена.
@@ -1453,6 +1465,24 @@ draw =
.n-object-s-erased = Удалено объектов: __ocs_fmt_0__.
modify =
.add-vertex = Добавить вершину
.closed-cross = Закрытое пересечение
.closed-tee = Закрытое Т-соединение
.corner-joint = Угловое соединение
.cut-all = Обрезать всё
.cut-single = Обрезать один
.delete-vertex = Удалить вершину
.merged-cross = Объединённое пересечение
.merged-tee = Объединённое Т-соединение
.mledit-choose-an-edit-tool = MLEDIT Выберите инструмент редактирования:
.mledit-select-first-multiline = MLEDIT Выберите первую мультилинию:
.mledit-select-second-multiline = MLEDIT Выберите вторую мультилинию:
.mledit-specify-end-of-weld-range = MLEDIT Укажите конец диапазона соединения:
.mledit-specify-second-cut-point = MLEDIT Укажите вторую точку разреза:
.open-cross = Открытое пересечение
.open-tee = Открытое Т-соединение
.remove-vertex = Убрать вершину
.weld-all = Соединить всё
.count-objects = (__ocs_arg_count__ объекты)
.edge-extend-indented-title-case = [Перенаправлено с Extend]
.align-scale-objects-based-on-alignment-points = ALIGN Объекты масштаба, основанные на точках выравнивания? [Y/N]:
@@ -1789,6 +1819,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__: стиль __ocs_fmt_1__ не найден.
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED Введите текст размера (пусто = измеренное значение):
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED Выберите дугу, окружность или дуговой сегмент полилинии:
.dimjogged-specify-center-location-override = DIMJOGGED Укажите переопределённое положение центра:
.dimjogged-specify-dimension-line-location-text = DIMJOGGED Укажите положение размерной линии [Мтекст/Текст/Угол]:
.dimjogged-specify-jog-location = DIMJOGGED Укажите положение излома:
.dimjogged-specify-text-angle-degrees = DIMJOGGED Укажите угол текста (в градусах):
.table-cell-enter-text-row-column-current = TABLE CELL Введите текст для [__ocs_arg_row__,__ocs_arg_column__] <__ocs_arg_current__>:
.table-enter-column-width-width = TABLE Введите ширину столбца [__ocs_arg_width__]:
.table-enter-number-of-data-rows-rows-cols = TABLE Введите число строк данных [__ocs_arg_rows__] (столбцов: __ocs_arg_cols__):
.table-enter-row-height-height = TABLE Введите высоту строки [__ocs_arg_height__]:
.table-insertion-behavior-point-window-mode = TABLE Способ вставки [Точка/Окно] <__ocs_arg_mode__>:
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT Введите режим редактирования текста [Один/Множество] <__ocs_arg_mode__>:
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE Введите новое значение TEXTEDITMODE <__ocs_arg_v__:
.arctext-text-to-place-along-the-arc = ARCTEXT Текст для размещения по дуге:
@@ -2151,6 +2192,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <слой> = заморозить | T <слой> = разморозить | Enter = выход
view =
.datalink-specify-insertion-point = DATALINK Укажите точку вставки:
.table-block-definition-not-found = TABLE: определение блока не найдено.
.table-edit-applied = TABLE: изменение применено.
.table-field-handle-not-found = TABLE: дескриптор поля не найден.
.table-row-column-out-of-range-or-cell-locked = TABLE: строка/столбец вне диапазона или ячейка заблокирована.
.table-select-a-table-first = TABLE: сначала выберите таблицу.
.usage-table-edit-actions = Использование: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__
.code-page = Страница кода: __ocs_fmt_0__
.created-julian-6 = Создано (Julian): __ocs_fmt_0__
@@ -2367,6 +2415,34 @@ view =
.viewport-s-in-layout = Видовые экраны (__ocs_fmt_0__) на листе «__ocs_fmt_1__»:
properties =
.arrowhead-size = Размер стрелки
.attachment = Прикрепление
.chord = Хорда
.control-point-x-sentence-case = Контрольная точка X
.control-point-y-sentence-case = Контрольная точка Y
.control-point-z-sentence-case = Контрольная точка Z
.control-vertices = Контрольные вершины
.current-control-point = Текущая контрольная точка
.current-fit-point = Текущая точка аппроксимации
.cv-frame = Рамка КВ
.end-tangent-vector-x = Конечный вектор касательной X
.end-tangent-vector-y = Конечный вектор касательной Y
.end-tangent-vector-z = Конечный вектор касательной Z
.extended-data = Расширенные данные
.fit-point-x-sentence-case = Точка аппроксимации X
.fit-point-y-sentence-case = Точка аппроксимации Y
.fit-point-z-sentence-case = Точка аппроксимации Z
.fit-tolerance-sentence-case = Допуск аппроксимации
.hide = Скрыть
.knot-parameterization-sentence-case = Параметризация узлов
.number-of-control-points = Число контрольных точек
.number-of-fit-points = Число точек аппроксимации
.periodic = Периодический
.square-root = Квадратный корень
.start-tangent-vector-x = Начальный вектор касательной X
.start-tangent-vector-y = Начальный вектор касательной Y
.start-tangent-vector-z = Начальный вектор касательной Z
.uniform = Равномерный
.count-objects-selected = __ocs_arg_count__ Выбранные объекты
.scope-visual-style = __ocs_arg_scope__ Визуальный стиль
.value-3d-face = 3D-лицо
locales/tr-TR/opencadstudio.ftl
+1
View File
@@ -2353,6 +2353,7 @@ view =
.viewport-s-in-layout = "__ocs_fmt_1__" yerleşiminde __ocs_fmt_0__ görünüm alanı:
properties =
.extended-data = Genişletilmiş Veri
.count-objects-selected = __ocs_arg_count__ nesne seçildi
.scope-visual-style = __ocs_arg_scope__ Görsel Stil
.value-3d-face = 3B Yüz
locales/zh-CN/opencadstudio.ftl
+76
View File
@@ -223,6 +223,7 @@ command-copy =
.target = COPY 指定目标点 [已复制 { $count } 个 | 阵列 | 回车=完成 | 基点 { $x },{ $y }]：
common =
.jogged-radius = 折弯半径
.none-use-shortcuts-set-key-command = （无 — 使用：SHORTCUTS SET <key> <command>）
.alignment-indented-label-title-case = 对齐:
.background-fill-enabled = 启用背景填充
@@ -1154,6 +1155,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ 面积=__ocs_fmt_1__ 周边=__ocs_fmt_2__ 中心=(单位:千兆克;__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = 已加载的多线样式：__ocs_fmt_0__
.mline-current-settings = MLINE 当前设置：对正 = __ocs_fmt_0__，比例 = __ocs_fmt_1__，样式 = __ocs_fmt_2__
.mline-enter-justification = MLINE 输入对正类型 [上/零/下] <__ocs_fmt_0__>：
.mline-enter-scale-factor-default = MLINE 输入比例因子 <__ocs_fmt_0__>：
.mline-enter-style-name = MLINE 输入样式名称或 [?] <__ocs_fmt_0__>：
.mline-specify-next-point-close-undo = MLINE 指定下一点或 [闭合/放弃]：
.mline-specify-next-point-undo = MLINE 指定下一点或 [放弃]：
.multiline-style-was-not-found = 未找到多线样式“__ocs_arg_style__”。
.donut-specify-second-point-for-inside-diameter = DONUT 指定内径的第二点：
.donut-specify-second-point-for-outside-diameter = DONUT 指定外径的第二点：
.spline-specify-first-point = SPLINE 指定第一点：
.insert-x-no-attributes = 插入__ocs_fmt_0__:没有属性。
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ 未找到闭合边界。
@@ -1437,6 +1449,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ 对象已去除。
modify =
.add-vertex = 添加顶点
.closed-cross = 闭合十字
.closed-tee = 闭合T形
.corner-joint = 角点接合
.cut-all = 全部剪切
.cut-single = 单个剪切
.delete-vertex = 删除顶点
.merged-cross = 合并十字
.merged-tee = 合并T形
.mledit-choose-an-edit-tool = MLEDIT 选择编辑工具：
.mledit-select-first-multiline = MLEDIT 选择第一条多线：
.mledit-select-second-multiline = MLEDIT 选择第二条多线：
.mledit-specify-end-of-weld-range = MLEDIT 指定接合范围的终点：
.mledit-specify-second-cut-point = MLEDIT 指定第二个剪切点：
.open-cross = 开放十字
.open-tee = 开放T形
.remove-vertex = 移除顶点
.weld-all = 全部接合
.count-objects = （__ocs_arg_count__ 个对象）
.edge-extend-indented-title-case = [标题:延伸]
.align-scale-objects-based-on-alignment-points = ALIGN 是否基于对齐点缩放对象？[Y/N]：
@@ -1773,6 +1803,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__:样式“__ocs_fmt_1__”未找到。
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED 输入标注文字（留空 = 测量值）：
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED 选择圆弧、圆或多段线圆弧：
.dimjogged-specify-center-location-override = DIMJOGGED 指定替代圆心位置：
.dimjogged-specify-dimension-line-location-text = DIMJOGGED 指定尺寸线位置 [多行文字/文字/角度]：
.dimjogged-specify-jog-location = DIMJOGGED 指定折弯位置：
.dimjogged-specify-text-angle-degrees = DIMJOGGED 指定文字角度（度）：
.table-cell-enter-text-row-column-current = TABLE CELL 输入单元格 [__ocs_arg_row__,__ocs_arg_column__] 的文字 <__ocs_arg_current__>：
.table-enter-column-width-width = TABLE 输入列宽 [__ocs_arg_width__]：
.table-enter-number-of-data-rows-rows-cols = TABLE 输入数据行数 [__ocs_arg_rows__]（__ocs_arg_cols__ 列）：
.table-enter-row-height-height = TABLE 输入行高 [__ocs_arg_height__]：
.table-insertion-behavior-point-window-mode = TABLE 插入方式 [点/窗口] <__ocs_arg_mode__>：
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT 输入文字编辑模式 [单个/多个] <__ocs_arg_mode__>：
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE 输入 TEXTEDITMODE 的新值 <__ocs_arg_v__>：
.arctext-text-to-place-along-the-arc = ARCTEXT 将文字放在弧上:
@@ -2131,6 +2172,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <图层> = 冻结 | T <图层> = 解冻 | Enter = 退出
view =
.datalink-specify-insertion-point = DATALINK 指定插入点：
.table-block-definition-not-found = TABLE：未找到块定义。
.table-edit-applied = TABLE：已应用编辑。
.table-field-handle-not-found = TABLE：未找到字段句柄。
.table-row-column-out-of-range-or-cell-locked = TABLE：行/列超出范围或单元格已锁定。
.table-select-a-table-first = TABLE：请先选择表格。
.usage-table-edit-actions = 用法：TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__ , 来点
.code-page = 代码页 : __ocs_fmt_0__
.created-julian-6 = 创建 (Julian): __ocs_fmt_0__
@@ -2347,6 +2395,34 @@ view =
.viewport-s-in-layout = 布局“__ocs_fmt_1__”中的视口（__ocs_fmt_0__ 个）：
properties =
.arrowhead-size = 箭头大小
.attachment = 附着
.chord = 弦
.control-point-x-sentence-case = 控制点 X
.control-point-y-sentence-case = 控制点 Y
.control-point-z-sentence-case = 控制点 Z
.control-vertices = 控制顶点
.current-control-point = 当前控制点
.current-fit-point = 当前拟合点
.cv-frame = CV 框架
.end-tangent-vector-x = 终点切向量 X
.end-tangent-vector-y = 终点切向量 Y
.end-tangent-vector-z = 终点切向量 Z
.extended-data = 扩展数据
.fit-point-x-sentence-case = 拟合点 X
.fit-point-y-sentence-case = 拟合点 Y
.fit-point-z-sentence-case = 拟合点 Z
.fit-tolerance-sentence-case = 拟合公差
.hide = 隐藏
.knot-parameterization-sentence-case = 节点参数化
.number-of-control-points = 控制点数量
.number-of-fit-points = 拟合点数量
.periodic = 周期
.square-root = 平方根
.start-tangent-vector-x = 起点切向量 X
.start-tangent-vector-y = 起点切向量 Y
.start-tangent-vector-z = 起点切向量 Z
.uniform = 均匀
.count-objects-selected = __ocs_arg_count__ 个对象已选择
.scope-visual-style = __ocs_arg_scope__ 视觉样式
.value-3d-face = 三维面
locales/zh-TW/opencadstudio.ftl
+76
View File
@@ -235,6 +235,7 @@ command-copy =
} | 陣列 | Enter=完成 | 基準點 { $x },{ $y }]：
common =
.jogged-radius = 折彎半徑
.none-use-shortcuts-set-key-command = （無 — 使用：SHORTCUTS SET <key> <command>）
.alignment-indented-label-title-case = 對齊:
.background-fill-enabled = 啟用背景填充
@@ -1166,6 +1167,17 @@ inquiry =
.area-4-perimeter-4-centroid-4-4 = __ocs_fmt_0__ 面積=__ocs_fmt_1__ 周邊=__ocs_fmt_2__ 中心=(單位:千兆克;__ocs_fmt_3__,__ocs_fmt_4__)
draw =
.loaded-multiline-styles = 已載入的多線樣式：__ocs_fmt_0__
.mline-current-settings = MLINE 目前設定：對正 = __ocs_fmt_0__，比例 = __ocs_fmt_1__，樣式 = __ocs_fmt_2__
.mline-enter-justification = MLINE 輸入對正類型 [上/零/下] <__ocs_fmt_0__>：
.mline-enter-scale-factor-default = MLINE 輸入比例係數 <__ocs_fmt_0__>：
.mline-enter-style-name = MLINE 輸入樣式名稱或 [?] <__ocs_fmt_0__>：
.mline-specify-next-point-close-undo = MLINE 指定下一點或 [閉合/復原]：
.mline-specify-next-point-undo = MLINE 指定下一點或 [復原]：
.multiline-style-was-not-found = 找不到多線樣式「__ocs_arg_style__」。
.donut-specify-second-point-for-inside-diameter = DONUT 指定內徑的第二點：
.donut-specify-second-point-for-outside-diameter = DONUT 指定外徑的第二點：
.spline-specify-first-point = SPLINE 指定第一點：
.insert-x-no-attributes = 插入__ocs_fmt_0__:沒有屬性。
.tag-val = [__ocs_fmt_0__] = __ocs_fmt_1__
.no-closed-boundary-found = ⚠ 未找到閉合邊界。
@@ -1449,6 +1461,24 @@ draw =
.n-object-s-erased = __ocs_fmt_0__ 物件已去除。
modify =
.add-vertex = 新增頂點
.closed-cross = 閉合十字
.closed-tee = 閉合T形
.corner-joint = 角點接合
.cut-all = 全部剪切
.cut-single = 單一剪切
.delete-vertex = 刪除頂點
.merged-cross = 合併十字
.merged-tee = 合併T形
.mledit-choose-an-edit-tool = MLEDIT 選擇編輯工具：
.mledit-select-first-multiline = MLEDIT 選擇第一條多線：
.mledit-select-second-multiline = MLEDIT 選擇第二條多線：
.mledit-specify-end-of-weld-range = MLEDIT 指定接合範圍的終點：
.mledit-specify-second-cut-point = MLEDIT 指定第二個剪切點：
.open-cross = 開放十字
.open-tee = 開放T形
.remove-vertex = 移除頂點
.weld-all = 全部接合
.count-objects = （__ocs_arg_count__ 個物件）
.edge-extend-indented-title-case = [標題:延伸]
.align-scale-objects-based-on-alignment-points = ALIGN 是否基於對齊點縮放物件？[Y/N]：
@@ -1785,6 +1815,17 @@ layers =
.prefix-style-style-name-not-found = __ocs_fmt_0__:樣式“__ocs_fmt_1__”未找到。
annotate =
.dimjogged-enter-dimension-text-blank-measured = DIMJOGGED 輸入標註文字（留空 = 測量值）：
.dimjogged-select-arc-circle-or-polyline-arc = DIMJOGGED 選擇圓弧、圓或聚合線圓弧：
.dimjogged-specify-center-location-override = DIMJOGGED 指定替代圓心位置：
.dimjogged-specify-dimension-line-location-text = DIMJOGGED 指定尺寸線位置 [多行文字/文字/角度]：
.dimjogged-specify-jog-location = DIMJOGGED 指定折彎位置：
.dimjogged-specify-text-angle-degrees = DIMJOGGED 指定文字角度（度）：
.table-cell-enter-text-row-column-current = TABLE CELL 輸入儲存格 [__ocs_arg_row__,__ocs_arg_column__] 的文字 <__ocs_arg_current__>：
.table-enter-column-width-width = TABLE 輸入欄寬 [__ocs_arg_width__]：
.table-enter-number-of-data-rows-rows-cols = TABLE 輸入資料列數 [__ocs_arg_rows__]（__ocs_arg_cols__ 欄）：
.table-enter-row-height-height = TABLE 輸入列高 [__ocs_arg_height__]：
.table-insertion-behavior-point-window-mode = TABLE 插入方式 [點/視窗] <__ocs_arg_mode__>：
.prefix-textedit-enter-text-edit-mode-single-mu = __ocs_arg_prefix__TEXTEDIT 輸入文字編輯模式 [單個/多個] <__ocs_arg_mode__>：
.prefix-texteditmode-enter-new-value-for-texted = __ocs_arg_prefix__TEXTEDITMODE 輸入 TEXTEDITMODE 的新值 <__ocs_arg_v__>：
.arctext-text-to-place-along-the-arc = ARCTEXT 將文字放在弧上:
@@ -2143,6 +2184,13 @@ layout =
.vplayer-f-layer-freeze-t-layer-thaw-enter-exit = VPLAYER F <圖層> = 凍結 | T <圖層> = 解凍 | Enter = 退出
view =
.datalink-specify-insertion-point = DATALINK 指定插入點：
.table-block-definition-not-found = TABLE：找不到圖塊定義。
.table-edit-applied = TABLE：已套用編輯。
.table-field-handle-not-found = TABLE：找不到欄位控制代碼。
.table-row-column-out-of-range-or-cell-locked = TABLE：列/欄超出範圍或儲存格已鎖定。
.table-select-a-table-first = TABLE：請先選擇表格。
.usage-table-edit-actions = 用法：TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD
.message = __ocs_fmt_0__ , 來點
.code-page = 代碼頁 : __ocs_fmt_0__
.created-julian-6 = 建立 (Julian): __ocs_fmt_0__
@@ -2359,6 +2407,34 @@ view =
.viewport-s-in-layout = 配置“__ocs_fmt_1__”中的視口（__ocs_fmt_0__ 個）：
properties =
.arrowhead-size = 箭頭大小
.attachment = 附著
.chord = 弦
.control-point-x-sentence-case = 控制點 X
.control-point-y-sentence-case = 控制點 Y
.control-point-z-sentence-case = 控制點 Z
.control-vertices = 控制頂點
.current-control-point = 目前控制點
.current-fit-point = 目前擬合點
.cv-frame = CV 框架
.end-tangent-vector-x = 終點切向量 X
.end-tangent-vector-y = 終點切向量 Y
.end-tangent-vector-z = 終點切向量 Z
.extended-data = 延伸資料
.fit-point-x-sentence-case = 擬合點 X
.fit-point-y-sentence-case = 擬合點 Y
.fit-point-z-sentence-case = 擬合點 Z
.fit-tolerance-sentence-case = 擬合公差
.hide = 隱藏
.knot-parameterization-sentence-case = 節點參數化
.number-of-control-points = 控制點數量
.number-of-fit-points = 擬合點數量
.periodic = 週期
.square-root = 平方根
.start-tangent-vector-x = 起點切向量 X
.start-tangent-vector-y = 起點切向量 Y
.start-tangent-vector-z = 起點切向量 Z
.uniform = 均勻
.count-objects-selected = __ocs_arg_count__ 個物件已選擇
.scope-visual-style = __ocs_arg_scope__ 視覺樣式
.value-3d-face = 三維面