ADJUST: images and underlays, -IMAGEADJUST and PDF/DWF/DGNADJUST

ADJUST gathers raster images or PDF/DWF/DGN underlays (other objects are
dropped silently, pickfirst is used, a mixed set is refused), then asks the
image option (Brightness default) or the underlay option (last used), with
value prompts that offer the image's own value or the session's last
underlay fade/contrast, and Monochrome Yes/No. Invalid values re-prompt.
One undo step. -IMAGEADJUST, PDFADJUST, DWFADJUST and DGNADJUST take one
kind each. Raster image Brightness/Contrast/Fade move to an Image Adjust
section as whole numbers with 0-100 validation.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

locales/ar-SA/opencadstudio.ftl

@@ -1093,7 +1093,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: أدخل Left أو Top أو Right.
     .isodraft-expected-on-or-off = ISODRAFT: أدخل On أو Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: العناصر المحددة على طبقات مقفلة.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: لم يتم تحديد صور نقطية أو الخاصية غير معروفة (استخدم BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: أدخل عددًا صحيحًا من -4 إلى 4.
     .usage-datalink-path-to-csv = الاستخدام: DATALINK <مسار-ملف-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: لم يتم العثور على جداول مرتبطة.
@@ -3930,6 +3929,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = حدد صورة أو طبقة سفلية:
+    .adjust-select-pdf-underlay = حدد طبقة سفلية PDF:
+    .adjust-select-dwf-underlay = حدد طبقة سفلية DWF:
+    .adjust-select-dgn-underlay = حدد طبقة سفلية DGN:
+    .adjust-mixed-underlays = *مجموعة تحديد غير صالحة. حدد طبقات سفلية من نوع الملف نفسه فقط.*
+    .adjust-image-option = أدخل خيار الصورة [التباين/التلاشي/السطوع] <السطوع>:
+    .adjust-underlay-option = أدخل خيار الطبقة السفلية __ocs_arg_kind__ [التلاشي/التباين/أحادي اللون] <__ocs_arg_option__>:
+    .adjust-monochrome = أحادي اللون? [نعم/لا] <__ocs_arg_value__>:
+    .adjust-brightness-value = أدخل قيمة السطوع (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = أدخل قيمة التباين (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = أدخل قيمة التلاشي (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = يجب أن تكون القيمة عددًا صحيحًا بين 0 و 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4658,13 +4669,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: لا توجد بيانات موسعة.
     .value-3d-orbit = مدار ثلاثي الأبعاد
     .value-3d-orbit-drag-with-right-mouse-button = المدار ثلاثي الأبعاد: اسحب بزر الفأرة الأيمن.
-    .adjust-brightness-contrast-fade = ADJUST  [السطوع / التباين / التلاشي]:
-    .adjust-brightness-0-100 = ADJUST  السطوع 0-100:
-    .adjust-contrast-0-100 = ADJUST  التباين 0-100:
-    .adjust-fade-0-100 = ADJUST  التلاشي 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: حدد صورة نقطية أولًا.
-    .adjust-value-must-be-0-100 = ADJUST: يجب أن تكون القيمة بين 0 و100.
-    .adjust-action-v-on-changed-image-s = ADJUST: ‏__ocs_fmt_0__ = __ocs_fmt_1__ على __ocs_fmt_2__ صورة.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  القيمة الجديدة [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: أدخل 0 أو 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  القيمة الجديدة [-4..4]:
@@ -4790,7 +4794,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = الطبقة السفلية __ocs_fmt_0__: التلاشي=__ocs_fmt_1__، التباين=__ocs_fmt_2__، التشغيل=__ocs_fmt_3__، القص=__ocs_fmt_4__، الأحادي=__ocs_fmt_5__
     .updated-changed-underlay-s = تم تحديث __ocs_fmt_0__ طبقة سفلية.
-    .usage-adjust-brightness-contrast-fade-0-100 = الاستخدام: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = الاستخدام: ANNOSCALE <ratio> مثلًا 1:50 أو 2:1 أو معامل
     .usage-draworder-f-front-b-back-a-above-handle = الاستخدام: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = الاستخدام: HYPERLINK <url> (حدد الكائنات أولًا)

locales/bg-BG/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: въведете Left, Top или Right.
     .isodraft-expected-on-or-off = ISODRAFT: въведете On или Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: избраните обекти са в заключени слоеве.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: няма избрани растерни изображения или свойството е неизвестно (използвайте BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: въведете цяло число от -4 до 4.
     .usage-datalink-path-to-csv = Употреба: DATALINK <път-до-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: няма намерени свързани таблици.
@@ -3917,6 +3916,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Изберете изображение или подложка:
+    .adjust-select-pdf-underlay = Изберете подложка PDF:
+    .adjust-select-dwf-underlay = Изберете подложка DWF:
+    .adjust-select-dgn-underlay = Изберете подложка DGN:
+    .adjust-mixed-underlays = *Невалиден набор за избор. Изберете само подложки от един и същ файлов тип.*
+    .adjust-image-option = Въведете опция за изображение [Контраст/Заглушаване/Яркост] <Яркост>:
+    .adjust-underlay-option = Въведете опция за подложка __ocs_arg_kind__ [Заглушаване/Контраст/Монохромно] <__ocs_arg_option__>:
+    .adjust-monochrome = Монохромно? [Да/Не] <__ocs_arg_value__>:
+    .adjust-brightness-value = Въведете стойност: яркост (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Въведете стойност: контраст (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Въведете стойност: заглушаване (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Стойността трябва да е цяло число между 0 и 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4645,13 +4656,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: няма xdata.
     .value-3d-orbit = 3D Орбита
     .value-3d-orbit-drag-with-right-mouse-button = 3D Орбита: влачи с десен бутон на мишката.
-    .adjust-brightness-contrast-fade = ADJUST  [Яркост / Контраст / Заглушаване]:
-    .adjust-brightness-0-100 = ADJUST  яркост 0-100:
-    .adjust-contrast-0-100 = ADJUST  контраст 0-100:
-    .adjust-fade-0-100 = ADJUST  заглушаване 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: първо избери растерно изображение(я).
-    .adjust-value-must-be-0-100 = ADJUST: стойността трябва да е 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ на __ocs_fmt_2__ изображение(я).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  нова стойност [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: въведи 0 или 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  нова стойност [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Подложка __ocs_fmt_0__: заглушаване=__ocs_fmt_1__, контраст=__ocs_fmt_2__, вкл.=__ocs_fmt_3__, изрязване=__ocs_fmt_4__, моно=__ocs_fmt_5__
     .updated-changed-underlay-s = Обновени __ocs_fmt_0__ подложка(и).
-    .usage-adjust-brightness-contrast-fade-0-100 = Употреба: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Употреба: ANNOSCALE <съотношение>  напр. 1:50, 2:1, или фактор
     .usage-draworder-f-front-b-back-a-above-handle = Употреба: DRAWORDER F|FRONT | B|BACK | A|ABOVE <манипулатор> | U|UNDER <манипулатор>
     .usage-hyperlink-url-select-objects-first = Употреба: HYPERLINK <url>   (първо избери обекти)

locales/cs-CZ/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: zadejte Left, Top nebo Right.
     .isodraft-expected-on-or-off = ISODRAFT: zadejte On nebo Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: vybrané objekty jsou v uzamčených hladinách.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nejsou vybrány rastrové obrázky nebo je vlastnost neznámá (použijte BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: zadejte celé číslo od -4 do 4.
     .usage-datalink-path-to-csv = Použití: DATALINK <cesta-k-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nebyly nalezeny propojené tabulky.
@@ -3915,6 +3914,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Vyberte obrázek nebo podklad:
+    .adjust-select-pdf-underlay = Vyberte podklad PDF:
+    .adjust-select-dwf-underlay = Vyberte podklad DWF:
+    .adjust-select-dgn-underlay = Vyberte podklad DGN:
+    .adjust-mixed-underlays = *Neplatná sada výběru. Vyberte pouze podklady stejného typu souboru.*
+    .adjust-image-option = Zadejte možnost obrázku [Kontrast/Vyblednout/Jas] <Jas>:
+    .adjust-underlay-option = Zadejte možnost podkladu __ocs_arg_kind__ [Vyblednout/Kontrast/Monochromatický] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochromatický? [Ano/ne] <__ocs_arg_value__>:
+    .adjust-brightness-value = Zadejte hodnotu: jas (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Zadejte hodnotu: kontrast (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Zadejte hodnotu: vyblednout (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Hodnota musí být celé číslo mezi 0 a 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4643,13 +4654,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: žádná xdata.
     .value-3d-orbit = 3D oběh
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: táhněte pravým tlačítkem myši.
-    .adjust-brightness-contrast-fade = ADJUST [Jas / Kontrast / Vyblednutí]:
-    .adjust-brightness-0-100 = Jas ADJUST 0-100:
-    .adjust-contrast-0-100 = ADJUST kontrast 0-100:
-    .adjust-fade-0-100 = ADJUST prolínání 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: nejprve vyberte rastrový obrázek(y).
-    .adjust-value-must-be-0-100 = ADJUST: hodnota musí být 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ na snímcích __ocs_fmt_2__.
     .annoallvisible-new-value-0-1 = Nová hodnota ANNOALLVISIBLE [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: zadejte 0 nebo 1.
     .annoautoscale-new-value-4-4 = Nová hodnota ANNOAUTOSCALE [-4..4]:
@@ -4775,7 +4779,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Podložka __ocs_fmt_0__: vyblednout=__ocs_fmt_1__, kontrast=__ocs_fmt_2__, na=__ocs_fmt_3__, klip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Aktualizované podložky __ocs_fmt_0__.
-    .usage-adjust-brightness-contrast-fade-0-100 = Použití: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Použití: ANNOSCALE <ratio> např. 1:50, 2:1 nebo faktor
     .usage-draworder-f-front-b-back-a-above-handle = Používání: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Použití: HYPERLINK <url> (nejprve vyberte objekty)

locales/de-DE/opencadstudio.ftl

@@ -1081,7 +1081,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top oder Right eingeben.
     .isodraft-expected-on-or-off = ISODRAFT: On oder Off eingeben.
     .xdata-selected-entities-are-on-locked-layers = XDATA: Ausgewählte Objekte liegen auf gesperrten Layern.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: Keine Rasterbilder ausgewählt oder unbekannte Eigenschaft (BRIGHTNESS/CONTRAST/FADE verwenden).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: Eine ganze Zahl von -4 bis 4 eingeben.
     .usage-datalink-path-to-csv = Aufruf: DATALINK <Pfad-zur-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: keine verknüpften Tabellen gefunden.
@@ -3916,6 +3915,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Bild oder Unterlage wählen:
+    .adjust-select-pdf-underlay = PDF-Unterlage wählen:
+    .adjust-select-dwf-underlay = DWF-Unterlage wählen:
+    .adjust-select-dgn-underlay = DGN-Unterlage wählen:
+    .adjust-mixed-underlays = *Ungültiger Auswahlsatz. Nur Unterlagenobjekte desselben Dateityps wählen.*
+    .adjust-image-option = Bildoption eingeben [Kontrast/Abblendung/Helligkeit] <Helligkeit>:
+    .adjust-underlay-option = __ocs_arg_kind__-Unterlagenoption eingeben [Abblendung/Kontrast/Monochrom] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochrom? [Ja/Nein] <__ocs_arg_value__>:
+    .adjust-brightness-value = Wert für Helligkeit eingeben (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Wert für Kontrast eingeben (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Wert für Abblendung eingeben (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Der Wert muss eine ganze Zahl zwischen 0 und 100 sein.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4644,13 +4655,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: keine xdata.
     .value-3d-orbit = 3D-Bahn
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: Ziehen Sie mit der rechten Maustaste.
-    .adjust-brightness-contrast-fade = ADJUST [Helligkeit / Kontrast / Ausblenden]:
-    .adjust-brightness-0-100 = ADJUST  Helligkeit 0-100:
-    .adjust-contrast-0-100 = ADJUST  Kontrast 0-100:
-    .adjust-fade-0-100 = ADJUST Ausblenden 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: Wählen Sie zuerst Rasterbild(e).
-    .adjust-value-must-be-0-100 = ADJUST: Der Wert muss 0-100 sein.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ auf __ocs_fmt_2__ Bild(en).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  neuer Wert [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: Geben Sie 0 oder 1 ein.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  neuer Wert [-4..4]:
@@ -4776,7 +4780,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Unterlag __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Aktualisiert __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Verwendung: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Verwendung: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Verwendung: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Verwendung: HYPERLINK <url>   (select objects first)

locales/el-GR/opencadstudio.ftl

@@ -1082,7 +1082,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: πληκτρολογήστε Left, Top ή Right.
     .isodraft-expected-on-or-off = ISODRAFT: πληκτρολογήστε On ή Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: οι επιλεγμένες οντότητες βρίσκονται σε κλειδωμένα επίπεδα.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: δεν έχουν επιλεγεί εικόνες ράστερ ή η ιδιότητα είναι άγνωστη (χρησιμοποιήστε BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: εισαγάγετε ακέραιο από -4 έως 4.
     .usage-datalink-path-to-csv = Χρήση: DATALINK <διαδρομή-προς-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: δεν βρέθηκαν συνδεδεμένοι πίνακες.
@@ -3928,6 +3927,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Επιλέξτε εικόνα ή υπόβαθρο:
+    .adjust-select-pdf-underlay = Επιλέξτε υπόβαθρο PDF:
+    .adjust-select-dwf-underlay = Επιλέξτε υπόβαθρο DWF:
+    .adjust-select-dgn-underlay = Επιλέξτε υπόβαθρο DGN:
+    .adjust-mixed-underlays = *Μη έγκυρο σύνολο επιλογής. Επιλέξτε μόνο υπόβαθρα του ίδιου τύπου αρχείου.*
+    .adjust-image-option = Εισαγάγετε επιλογή εικόνας [Αντίθεση/Ξεθώριασμα/Φωτεινότητα] <Φωτεινότητα>:
+    .adjust-underlay-option = Εισαγάγετε επιλογή υποβάθρου __ocs_arg_kind__ [Ξεθώριασμα/Αντίθεση/Μονόχρωμο] <__ocs_arg_option__>:
+    .adjust-monochrome = Μονόχρωμο? [Ναι/Όχι] <__ocs_arg_value__>:
+    .adjust-brightness-value = Εισαγάγετε τιμή: φωτεινότητα (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Εισαγάγετε τιμή: αντίθεση (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Εισαγάγετε τιμή: ξεθώριασμα (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Η τιμή πρέπει να είναι ακέραιος αριθμός από 0 έως 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4639,13 +4650,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: χωρίς xdata.
     .value-3d-orbit = Τροχιά 3D
     .value-3d-orbit-drag-with-right-mouse-button = Τροχιά 3D: σύρετε με το δεξί πλήκτρο του ποντικιού.
-    .adjust-brightness-contrast-fade = ADJUST  [Φωτεινότητα / Αντίθεση / Ξεθώριασμα]:
-    .adjust-brightness-0-100 = ADJUST  φωτεινότητα 0-100:
-    .adjust-contrast-0-100 = ADJUST  αντίθεση 0-100:
-    .adjust-fade-0-100 = ADJUST  ξεθώριασμα 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: επιλέξτε πρώτα εικόνα(ες) ράστερ.
-    .adjust-value-must-be-0-100 = ADJUST: η τιμή πρέπει να είναι 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ σε __ocs_fmt_2__ εικόνα(ες).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  νέα τιμή [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: δώστε 0 ή 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  νέα τιμή [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Υπόβαθρο __ocs_fmt_0__: ξεθώριασμα=__ocs_fmt_1__, αντίθεση=__ocs_fmt_2__, ενεργό=__ocs_fmt_3__, αποκοπή=__ocs_fmt_4__, μονόχρωμο=__ocs_fmt_5__
     .updated-changed-underlay-s = Ενημερώθηκαν __ocs_fmt_0__ υπόβαθρο(α).
-    .usage-adjust-brightness-contrast-fade-0-100 = Χρήση: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Χρήση: ANNOSCALE <λόγος>  π.χ. 1:50, 2:1 ή συντελεστής
     .usage-draworder-f-front-b-back-a-above-handle = Χρήση: DRAWORDER F|FRONT | B|BACK | A|ABOVE <αναγνωριστικό> | U|UNDER <αναγνωριστικό>
     .usage-hyperlink-url-select-objects-first = Χρήση: HYPERLINK <url>   (επιλέξτε πρώτα αντικείμενα)

locales/en-US/opencadstudio.ftl

@@ -1079,7 +1079,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: expected Left, Top, or Right.
     .isodraft-expected-on-or-off = ISODRAFT: expected On or Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: selected entities are on locked layers.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: enter an integer from -4 through 4.
     .usage-datalink-path-to-csv = Usage: DATALINK <path-to-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: no linked tables found.
@@ -3928,6 +3927,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Select image or underlay:
+    .adjust-select-pdf-underlay = Select PDF underlay:
+    .adjust-select-dwf-underlay = Select DWF underlay:
+    .adjust-select-dgn-underlay = Select DGN underlay:
+    .adjust-mixed-underlays = *Invalid selection set. Select underlay objects of the same file type only.*
+    .adjust-image-option = Enter image option [Contrast/Fade/Brightness] <Brightness>:
+    .adjust-underlay-option = Enter __ocs_arg_kind__ underlay option [Fade/Contrast/Monochrome] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochrome? [Yes/No] <__ocs_arg_value__>:
+    .adjust-brightness-value = Enter brightness value (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Enter contrast value (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Enter fade value (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Value must be an integer between 0 and 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4638,13 +4649,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: no xdata.
     .value-3d-orbit = 3D Orbit
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: drag with right mouse button.
-    .adjust-brightness-contrast-fade = ADJUST  [Brightness / Contrast / Fade]:
-    .adjust-brightness-0-100 = ADJUST  brightness 0-100:
-    .adjust-contrast-0-100 = ADJUST  contrast 0-100:
-    .adjust-fade-0-100 = ADJUST  fade 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: select raster image(s) first.
-    .adjust-value-must-be-0-100 = ADJUST: value must be 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ on __ocs_fmt_2__ image(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  new value [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: enter 0 or 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  new value [-4..4]:
@@ -4776,7 +4780,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Underlay __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Updated __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Usage: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Usage: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Usage: HYPERLINK <url>   (select objects first)

locales/es-ES/opencadstudio.ftl

@@ -1081,7 +1081,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: introduzca Left, Top o Right.
     .isodraft-expected-on-or-off = ISODRAFT: introduzca On u Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: las entidades seleccionadas están en capas bloqueadas.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: no hay imágenes ráster seleccionadas o la propiedad es desconocida (use BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: introduzca un entero de -4 a 4.
     .usage-datalink-path-to-csv = Uso: DATALINK <ruta-al-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: no se encontraron tablas vinculadas.
@@ -3918,6 +3917,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Seleccione una imagen o un calco subyacente:
+    .adjust-select-pdf-underlay = Seleccione un calco subyacente PDF:
+    .adjust-select-dwf-underlay = Seleccione un calco subyacente DWF:
+    .adjust-select-dgn-underlay = Seleccione un calco subyacente DGN:
+    .adjust-mixed-underlays = *Conjunto de selección no válido. Seleccione solo calcos subyacentes del mismo tipo de archivo.*
+    .adjust-image-option = Indique una opción de imagen [Contraste/Desvanecimiento/Brillo] <Brillo>:
+    .adjust-underlay-option = Indique una opción de calco subyacente __ocs_arg_kind__ [Desvanecimiento/Contraste/Monocromo] <__ocs_arg_option__>:
+    .adjust-monochrome = Monocromo? [Sí/No] <__ocs_arg_value__>:
+    .adjust-brightness-value = Indique el valor de brillo (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Indique el valor de contraste (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Indique el valor de desvanecimiento (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = El valor debe ser un número entero entre 0 y 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4646,13 +4657,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: sin datos extendidos.
     .value-3d-orbit = Órbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Órbita 3D: arrastre con el botón derecho del ratón.
-    .adjust-brightness-contrast-fade = ADJUST  [Brillo/Contraste/Desvanecimiento]:
-    .adjust-brightness-0-100 = ADJUST  Brillo 0-100:
-    .adjust-contrast-0-100 = ADJUST  Contraste 0-100:
-    .adjust-fade-0-100 = ADJUST  Desvanecimiento 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: seleccione primero una o más imágenes ráster.
-    .adjust-value-must-be-0-100 = ADJUST: el valor debe estar entre 0 y 100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ en __ocs_fmt_2__ imagen(es).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  Valor nuevo [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: introduzca 0 o 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  Valor nuevo [-4..4]:
@@ -4778,7 +4782,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Calco __ocs_fmt_0__: difuminado=__ocs_fmt_1__, contraste=__ocs_fmt_2__, activado=__ocs_fmt_3__, delimitado=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Se actualizaron __ocs_fmt_0__ calcos subyacentes.
-    .usage-adjust-brightness-contrast-fade-0-100 = Uso: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Uso: ANNOSCALE <relación>  p. ej., 1:50, 2:1 o un factor
     .usage-draworder-f-front-b-back-a-above-handle = Uso: DRAWORDER F|FRONT | B|BACK | A|ABOVE <identificador> | U|UNDER <identificador>
     .usage-hyperlink-url-select-objects-first = Uso: HYPERLINK <url> (seleccione primero los objetos)

locales/fi-FI/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: anna Left, Top tai Right.
     .isodraft-expected-on-or-off = ISODRAFT: anna On tai Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: valitut objektit ovat lukituilla tasoilla.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: rasterikuvia ei ole valittu tai ominaisuus on tuntematon (käytä BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: anna kokonaisluku väliltä -4–4.
     .usage-datalink-path-to-csv = Käyttö: DATALINK <.csv-tiedoston-polku>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: linkitettyjä taulukoita ei löytynyt.
@@ -3917,6 +3916,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Valitse kuva tai pohja:
+    .adjust-select-pdf-underlay = Valitse PDF-pohja:
+    .adjust-select-dwf-underlay = Valitse DWF-pohja:
+    .adjust-select-dgn-underlay = Valitse DGN-pohja:
+    .adjust-mixed-underlays = *Virheellinen valintajoukko. Valitse vain samaa tiedostotyyppiä olevia pohjia.*
+    .adjust-image-option = Anna kuvan asetus [Kontrasti/Häivyttää/Kirkkaus] <Kirkkaus>:
+    .adjust-underlay-option = Anna __ocs_arg_kind__-pohjan asetus [Häivyttää/Kontrasti/Yksivärinen] <__ocs_arg_option__>:
+    .adjust-monochrome = Yksivärinen? [Kyllä/Ei] <__ocs_arg_value__>:
+    .adjust-brightness-value = Anna arvo: kirkkaus (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Anna arvo: kontrasti (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Anna arvo: häivyttää (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Arvon on oltava kokonaisluku väliltä 0–100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4645,13 +4656,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: ei xdataa.
     .value-3d-orbit =3D kiertorata
     .value-3d-orbit-drag-with-right-mouse-button = 3D-kiertorata: vedä hiiren oikealla painikkeella.
-    .adjust-brightness-contrast-fade = ADJUST [Kirkkaus / Kontrasti / Haalistuminen]:
-    .adjust-brightness-0-100 = ADJUST kirkkaus 0-100:
-    .adjust-contrast-0-100 = ADJUST kontrasti 0-100:
-    .adjust-fade-0-100 = ADJUST häivytys 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: valitse ensin rasterikuva(t).
-    .adjust-value-must-be-0-100 = ADJUST: arvon on oltava 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ __ocs_fmt_2__-kuvissa.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE uusi arvo [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: kirjoita 0 tai 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE uusi arvo [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USER__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Aluskate __ocs_fmt_0__: haalistua=__ocs_fmt_1__, kontrasti=__ocs_fmt_2__, päällä=__ocs_fmt_3__, klipsi=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Päivitetty __ocs_fmt_0__-alusta(t).
-    .usage-adjust-brightness-contrast-fade-0-100 = Käyttö: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Käyttö: ANNOSCALE <ratio> esim. 1:50, 2:1 tai kerroin
     .usage-draworder-f-front-b-back-a-above-handle = Käyttö: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Käyttö: HYPERLINK <url> (valitse ensin objektit)

locales/fr-FR/opencadstudio.ftl

@@ -1081,7 +1081,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE : saisissez Left, Top ou Right.
     .isodraft-expected-on-or-off = ISODRAFT : saisissez On ou Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA : les objets sélectionnés sont sur des calques verrouillés.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST : aucune image matricielle sélectionnée ou propriété inconnue (utilisez BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE : saisissez un entier entre -4 et 4.
     .usage-datalink-path-to-csv = Utilisation : DATALINK <chemin-du-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE : aucune table liée trouvée.
@@ -3918,6 +3917,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Sélectionnez une image ou un calque sous-jacent :
+    .adjust-select-pdf-underlay = Sélectionnez un calque sous-jacent PDF :
+    .adjust-select-dwf-underlay = Sélectionnez un calque sous-jacent DWF :
+    .adjust-select-dgn-underlay = Sélectionnez un calque sous-jacent DGN :
+    .adjust-mixed-underlays = *Jeu de sélection non valide. Sélectionnez uniquement des calques sous-jacents du même type de fichier.*
+    .adjust-image-option = Entrez une option d'image [Contraste/Estompage/Luminosité] <Luminosité>:
+    .adjust-underlay-option = Entrez une option de calque sous-jacent __ocs_arg_kind__ [Estompage/Contraste/Monochrome] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochrome? [Oui/Non] <__ocs_arg_value__>:
+    .adjust-brightness-value = Entrez la valeur de luminosité (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Entrez la valeur de contraste (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Entrez la valeur d’estompage (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = La valeur doit être un nombre entier compris entre 0 et 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4647,13 +4658,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: pas de xdata.
     .value-3d-orbit = Orbite 3D
     .value-3d-orbit-drag-with-right-mouse-button = Orbite 3D: faites glisser avec le bouton droit de la souris.
-    .adjust-brightness-contrast-fade = ADJUST [Luminosité / Contraste / Estompage] :
-    .adjust-brightness-0-100 = ADJUST  luminosité 0-100:
-    .adjust-contrast-0-100 = ADJUST  contraste 0-100:
-    .adjust-fade-0-100 = ADJUST  estompage 0-100 :
-    .adjust-select-raster-image-s-first = ADJUST : sélectionnez d'abord les images master.
-    .adjust-value-must-be-0-100 = ADJUST: la valeur doit être 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ sur __ocs_fmt_2__ image(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  nouvelle valeur [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE : entrez 0 ou 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  nouvelle valeur [-4..4]:
@@ -4779,7 +4783,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Sous-couche __ocs_fmt_0__ : estompage=__ocs_fmt_1__, contraste=__ocs_fmt_2__, actif=__ocs_fmt_3__, délimitation=__ocs_fmt_4__, monochrome=__ocs_fmt_5__
     .updated-changed-underlay-s = Mise à jour de __ocs_fmt_0__ sous-couche(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Utilisation : ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Utilisation : ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Utilisation : DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Utilisation : HYPERLINK <url>   (select objects first)

locales/hi-IN/opencadstudio.ftl

@@ -1069,7 +1069,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top या Right दर्ज करें।
     .isodraft-expected-on-or-off = ISODRAFT: On या Off दर्ज करें।
     .xdata-selected-entities-are-on-locked-layers = XDATA: चयनित इकाइयाँ लॉक लेयर पर हैं।
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: कोई रास्टर छवि चयनित नहीं है या गुण अज्ञात है (BRIGHTNESS/CONTRAST/FADE उपयोग करें)।
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4 से 4 तक पूर्णांक दर्ज करें।
     .usage-datalink-path-to-csv = उपयोग: DATALINK <.csv-का-पथ>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: कोई लिंक की गई तालिका नहीं मिली।
@@ -3906,6 +3905,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = छवि या अंडरले चुनें:
+    .adjust-select-pdf-underlay = PDF अंडरले चुनें:
+    .adjust-select-dwf-underlay = DWF अंडरले चुनें:
+    .adjust-select-dgn-underlay = DGN अंडरले चुनें:
+    .adjust-mixed-underlays = *अमान्य चयन सेट। केवल एक ही फ़ाइल प्रकार के अंडरले चुनें।*
+    .adjust-image-option = छवि विकल्प दर्ज करें [कंट्रास्ट/फेड/चमक] <चमक>:
+    .adjust-underlay-option = __ocs_arg_kind__ अंडरले विकल्प दर्ज करें [फेड/कंट्रास्ट/मोनोक्रोम] <__ocs_arg_option__>:
+    .adjust-monochrome = मोनोक्रोम? [हाँ/नहीं] <__ocs_arg_value__>:
+    .adjust-brightness-value = चमक मान दर्ज करें (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = कंट्रास्ट मान दर्ज करें (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = फेड मान दर्ज करें (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = मान 0 और 100 के बीच का पूर्णांक होना चाहिए।
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4634,13 +4645,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: कोई Xdata नहीं।
     .value-3d-orbit = 3D कक्षा
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: दाहिने माउस बटन के साथ खींचें।
-    .adjust-brightness-contrast-fade = ADJUST [चमक / कॉन्ट्रास्ट / फेड]:
-    .adjust-brightness-0-100 = ADJUST  चमक 0-100:
-    .adjust-contrast-0-100 = ADJUST  विपरीत 0-100:
-    .adjust-fade-0-100 = ADJUST  फीका 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: पहले रास्टर छवि का चयन करें।
-    .adjust-value-must-be-0-100 = ADJUST: मान 0-100 होना चाहिए।
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ पर __ocs_fmt_2__ छवि(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  नया मान [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 या 1 दर्ज करें।
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  नया मूल्य [-4..4]:
@@ -4766,7 +4770,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Underlay __ocs_fmt_0__: frequ = __ocs_fmt_1__, विपरीत = __ocs_fmt_2__, on=__ocs_fmt_3__, क्लिप =__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = अद्यतन __ocs_fmt_0__ underlay(s)).
-    .usage-adjust-brightness-contrast-fade-0-100 = उपयोग: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = उपयोग: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = उपयोग: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = उपयोग: HYPERLINK <url>   (select objects first)

locales/hu-HU/opencadstudio.ftl

@@ -1085,7 +1085,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: írja be: Left, Top vagy Right.
     .isodraft-expected-on-or-off = ISODRAFT: írja be: On vagy Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: a kijelölt objektumok zárolt fóliákon vannak.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nincs kijelölt raszterkép, vagy ismeretlen a tulajdonság (használja: BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: adjon meg egy egész számot -4 és 4 között.
     .usage-datalink-path-to-csv = Használat: DATALINK <.csv-elérési-út>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nem található csatolt táblázat.
@@ -3914,6 +3913,18 @@ insert =
     .xref-attach-dwg = DWG csatolása
     .xref-attach-image = Kép csatolása
     .select-images = Válasszon képeket:
+    .adjust-select-image-or-underlay = Válasszon képet vagy alátétet:
+    .adjust-select-pdf-underlay = Válasszon PDF alátétet:
+    .adjust-select-dwf-underlay = Válasszon DWF alátétet:
+    .adjust-select-dgn-underlay = Válasszon DGN alátétet:
+    .adjust-mixed-underlays = *Érvénytelen kijelölési készlet. Csak azonos fájltípusú alátéteket válasszon.*
+    .adjust-image-option = Adja meg a kép opcióját [Kontraszt/Halványítás/Fényerő] <Fényerő>:
+    .adjust-underlay-option = Adja meg a(z) __ocs_arg_kind__ alátét opcióját [Halványítás/Kontraszt/Monokróm] <__ocs_arg_option__>:
+    .adjust-monochrome = Monokróm? [Igen/Nem] <__ocs_arg_value__>:
+    .adjust-brightness-value = Adja meg az értéket: fényerő (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Adja meg az értéket: kontraszt (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Adja meg az értéket: halványítás (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Az értéknek 0 és 100 közötti egész számnak kell lennie.
     .transparency-mode-on = Adja meg az átlátszósági módot [ON/OFF] <ON>:
     .transparency-mode-off = Adja meg az átlátszósági módot [ON/OFF] <OFF>:
     .xref-attach-menu = Csatolás…
@@ -4643,13 +4654,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: nincs xdata.
     .value-3d-orbit = 3D keringés
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: húzza a jobb egérgombbal.
-    .adjust-brightness-contrast-fade = ADJUST  [Brightness / Contrast / Fade]:
-    .adjust-brightness-0-100 = ADJUST fényerő 0-100:
-    .adjust-contrast-0-100 = ADJUST kontraszt 0-100:
-    .adjust-fade-0-100 = ADJUST  Halványítás 0–100:
-    .adjust-select-raster-image-s-first = ADJUST: először válassza ki a raszterképe(ke)t.
-    .adjust-value-must-be-0-100 = ADJUST: az értéknek 0 és 100 között kell lennie.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ __ocs_fmt_2__ kép(ek)en.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE új érték [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: írjon be 0 vagy 1 értéket.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE új érték [-4..4]:
@@ -4769,7 +4773,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Alávetítés __ocs_fmt_0__: halványítás=__ocs_fmt_1__, kontraszt=__ocs_fmt_2__, be=__ocs_fmt_3__, körülvágás=__ocs_fmt_4__, egyszínű=__ocs_fmt_5__
     .updated-changed-underlay-s = Frissített __ocs_fmt_0__ alávetítés(ek).
-    .usage-adjust-brightness-contrast-fade-0-100 = Használat: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Használat: ANNOSCALE <ratio> pl. 1:50, 2:1 vagy egy tényező
     .usage-draworder-f-front-b-back-a-above-handle = Használat: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Használat: HYPERLINK <url> (először válassza ki az objektumokat)

locales/it-IT/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: immetti Left, Top o Right.
     .isodraft-expected-on-or-off = ISODRAFT: immetti On o Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: le entità selezionate sono su layer bloccati.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nessuna immagine raster selezionata o proprietà sconosciuta (usa BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: immetti un intero da -4 a 4.
     .usage-datalink-path-to-csv = Uso: DATALINK <percorso-del-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nessuna tabella collegata trovata.
@@ -3917,6 +3916,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Selezionare un'immagine o un sottoposto:
+    .adjust-select-pdf-underlay = Selezionare un sottoposto PDF:
+    .adjust-select-dwf-underlay = Selezionare un sottoposto DWF:
+    .adjust-select-dgn-underlay = Selezionare un sottoposto DGN:
+    .adjust-mixed-underlays = *Gruppo di selezione non valido. Selezionare solo sottoposti dello stesso tipo di file.*
+    .adjust-image-option = Specificare un'opzione immagine [Contrasto/Svanire/Luminosità] <Luminosità>:
+    .adjust-underlay-option = Specificare un'opzione sottoposto __ocs_arg_kind__ [Svanire/Contrasto/Monocromatico] <__ocs_arg_option__>:
+    .adjust-monochrome = Monocromatico? [Sì/No] <__ocs_arg_value__>:
+    .adjust-brightness-value = Specificare il valore di luminosità (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Specificare il valore di contrasto (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Specificare il valore di svanire (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Il valore deve essere un numero intero compreso tra 0 e 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4645,13 +4656,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: nessun dato x.
     .value-3d-orbit =Orbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Orbita 3D: trascina con il tasto destro del mouse.
-    .adjust-brightness-contrast-fade = ADJUST [Luminosità/Contrasto/Dissolvenza]:
-    .adjust-brightness-0-100 = Luminosità ADJUST 0-100:
-    .adjust-contrast-0-100 = ADJUST contrasto 0-100:
-    .adjust-fade-0-100 = ADJUST dissolvenza 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: seleziona prima le immagini raster.
-    .adjust-value-must-be-0-100 = ADJUST: il valore deve essere compreso tra 0 e 100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ sulle immagini __ocs_fmt_2__.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE nuovo valore [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: inserisci 0 o 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE nuovo valore [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Sottofondo __ocs_fmt_0__: dissolvenza=__ocs_fmt_1__, contrasto=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Sottofondi __ocs_fmt_0__ aggiornati.
-    .usage-adjust-brightness-contrast-fade-0-100 = Utilizzo: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Utilizzo: ANNOSCALE <ratio> ad es. 1:50, 2:1 o un fattore
     .usage-draworder-f-front-b-back-a-above-handle = Utilizzo: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Utilizzo: HYPERLINK <url> (selezionare prima gli oggetti)

locales/ja-JP/opencadstudio.ftl

@@ -1071,7 +1071,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left、Top、Right のいずれかを入力してください。
     .isodraft-expected-on-or-off = ISODRAFT: On または Off を入力してください。
     .xdata-selected-entities-are-on-locked-layers = XDATA: 選択した図形はロックされた画層上にあります。
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: ラスター画像が選択されていないか、プロパティが不明です（BRIGHTNESS/CONTRAST/FADE を使用）。
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4 から 4 までの整数を入力してください。
     .usage-datalink-path-to-csv = 使用法: DATALINK <.csvのパス>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: リンクされた表が見つかりません。
@@ -3906,6 +3905,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = イメージまたはアンダーレイを選択:
+    .adjust-select-pdf-underlay = PDF アンダーレイを選択:
+    .adjust-select-dwf-underlay = DWF アンダーレイを選択:
+    .adjust-select-dgn-underlay = DGN アンダーレイを選択:
+    .adjust-mixed-underlays = *選択セットが無効です。同じファイル タイプのアンダーレイのみを選択してください。*
+    .adjust-image-option = イメージ オプションを入力 [コントラスト/フェード/明るさ] <明るさ>:
+    .adjust-underlay-option = __ocs_arg_kind__ アンダーレイ オプションを入力 [フェード/コントラスト/モノクロ] <__ocs_arg_option__>:
+    .adjust-monochrome = モノクロ? [はい/いいえ] <__ocs_arg_value__>:
+    .adjust-brightness-value = 明るさの値を入力 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = コントラストの値を入力 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = フェードの値を入力 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 値は 0 から 100 までの整数でなければなりません。
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4634,13 +4645,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: 拡張データなし。
     .value-3d-orbit = 3D オービット
     .value-3d-orbit-drag-with-right-mouse-button = 3D オービット: マウス右ボタンでドラッグします。
-    .adjust-brightness-contrast-fade = ADJUST  [明るさ / コントラスト / フェード]:
-    .adjust-brightness-0-100 = ADJUST  明るさ 0-100:
-    .adjust-contrast-0-100 = ADJUST  コントラスト 0-100:
-    .adjust-fade-0-100 = ADJUST  フェード 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: 先にラスター画像を選択してください。
-    .adjust-value-must-be-0-100 = ADJUST: 値は 0～100 にしてください。
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_2__ 個の画像で __ocs_fmt_0__ = __ocs_fmt_1__ に変更しました。
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  新しい値 [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 または 1 を入力してください。
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  新しい値 [-4..4]:
@@ -4766,7 +4770,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = アンダーレイ __ocs_fmt_0__: フェード=__ocs_fmt_1__、コントラスト=__ocs_fmt_2__、表示=__ocs_fmt_3__、クリップ=__ocs_fmt_4__、モノクロ=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ 個のアンダーレイを更新しました。
-    .usage-adjust-brightness-contrast-fade-0-100 = 使用法: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 使用法: ANNOSCALE <ratio>  例: 1:50、2:1、または係数
     .usage-draworder-f-front-b-back-a-above-handle = 使用法: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 使用法: HYPERLINK <url>   （先にオブジェクトを選択）

locales/ko-KR/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top 또는 Right를 입력하세요.
     .isodraft-expected-on-or-off = ISODRAFT: On 또는 Off를 입력하세요.
     .xdata-selected-entities-are-on-locked-layers = XDATA: 선택한 객체가 잠긴 도면층에 있습니다.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: 래스터 이미지를 선택하지 않았거나 알 수 없는 속성입니다(BRIGHTNESS/CONTRAST/FADE 사용).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4부터 4까지 정수를 입력하세요.
     .usage-datalink-path-to-csv = 사용법: DATALINK <.csv-경로>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: 연결된 테이블을 찾을 수 없습니다.
@@ -3917,6 +3916,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = 이미지 또는 언더레이 선택:
+    .adjust-select-pdf-underlay = PDF 언더레이 선택:
+    .adjust-select-dwf-underlay = DWF 언더레이 선택:
+    .adjust-select-dgn-underlay = DGN 언더레이 선택:
+    .adjust-mixed-underlays = *선택 세트가 잘못되었습니다. 같은 파일 유형의 언더레이만 선택하십시오.*
+    .adjust-image-option = 이미지 옵션 입력 [대비/페이드/밝기] <밝기>:
+    .adjust-underlay-option = __ocs_arg_kind__ 언더레이 옵션 입력 [페이드/대비/흑백] <__ocs_arg_option__>:
+    .adjust-monochrome = 흑백? [예/아니요] <__ocs_arg_value__>:
+    .adjust-brightness-value = 밝기 값 입력 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = 대비 값 입력 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = 페이드 값 입력 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 값은 0에서 100 사이의 정수여야 합니다.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4645,13 +4656,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: 확장 데이터가 없습니다.
     .value-3d-orbit =3D 궤도
     .value-3d-orbit-drag-with-right-mouse-button = 3D 궤도: 마우스 오른쪽 버튼으로 드래그합니다.
-    .adjust-brightness-contrast-fade = ADJUST [밝기 / 대비 / 페이드]:
-    .adjust-brightness-0-100 = ADJUST 밝기 0-100:
-    .adjust-contrast-0-100 = ADJUST 대비 0-100:
-    .adjust-fade-0-100 = ADJUST 페이드 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: 먼저 래스터 이미지를 선택합니다.
-    .adjust-value-must-be-0-100 = ADJUST: 값은 0-100이어야 합니다.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_2__ 이미지의 __ocs_fmt_0__ = __ocs_fmt_1__.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE 새 값 [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 또는 1을 입력합니다.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE 새 값 [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = 언더레이 __ocs_fmt_0__: fade=__ocs_fmt_1__, 대비=__ocs_fmt_2__, on=__ocs_fmt_3__, 클립=__ocs_fmt_4__, 모노=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ 언더레이가 업데이트되었습니다.
-    .usage-adjust-brightness-contrast-fade-0-100 = 사용법: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 사용법: ANNOSCALE <ratio> 예: 1:50, 2:1 또는 요소
     .usage-draworder-f-front-b-back-a-above-handle = 사용법: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 사용법: HYPERLINK <url>(객체를 먼저 선택)

locales/lo-LA/opencadstudio.ftl

@@ -1086,7 +1086,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: ຕ້ອງການ Left, Top, ຫຼື Right.
     .isodraft-expected-on-or-off = ISODRAFT: ຕ້ອງການ On ຫຼື Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: ອົງປະກອບທີ່ເລືອກຢູ່ໃນເລເຢີທີ່ລັອກໄວ້.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: ບໍ່ມີຮູບພາບຣາສເຕີຖືກເລືອກ, ຫຼື ບໍ່ຮູ້ຈັກຄຸນສົມບັດ (ໃຊ້ BRIGHTNESS|CONTRAST|FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: ປ້ອນຈຳນວນຖ້ວນແຕ່ -4 ຫາ 4.
     .usage-datalink-path-to-csv = ວິທີໃຊ້: DATALINK <ເສັ້ນທາງໄຟລ໌-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: ບໍ່ພົບຕາຕະລາງທີ່ເຊື່ອມໂຍງ.
@@ -3930,6 +3929,18 @@ insert =
     .xref-attach-dwg = ແນບ DWG
     .xref-attach-image = ແນບຮູບພາບ
     .select-images = ເລືອກຮູບພາບ:
+    .adjust-select-image-or-underlay = ເລືອກຮູບພາບ ຫຼື ຊັ້ນຮອງ:
+    .adjust-select-pdf-underlay = ເລືອກຊັ້ນຮອງ PDF:
+    .adjust-select-dwf-underlay = ເລືອກຊັ້ນຮອງ DWF:
+    .adjust-select-dgn-underlay = ເລືອກຊັ້ນຮອງ DGN:
+    .adjust-mixed-underlays = *ຊຸດການເລືອກບໍ່ຖືກຕ້ອງ. ເລືອກສະເພາະຊັ້ນຮອງທີ່ມີປະເພດໄຟລ໌ດຽວກັນ.*
+    .adjust-image-option = ປ້ອນຕົວເລືອກຮູບພາບ [ຄວາມຄົມຊັດ/ຈາງ/ຄວາມສະຫວ່າງ] <ຄວາມສະຫວ່າງ>:
+    .adjust-underlay-option = ປ້ອນຕົວເລືອກຊັ້ນຮອງ __ocs_arg_kind__ [ຈາງ/ຄວາມຄົມຊັດ/ສີຂາວດຳ] <__ocs_arg_option__>:
+    .adjust-monochrome = ສີຂາວດຳ? [ແມ່ນ/ບໍ່] <__ocs_arg_value__>:
+    .adjust-brightness-value = ປ້ອນຄ່າ ຄວາມສະຫວ່າງ (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = ປ້ອນຄ່າ ຄວາມຄົມຊັດ (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = ປ້ອນຄ່າ ຈາງ (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = ຄ່າຕ້ອງເປັນຈໍານວນຖ້ວນລະຫວ່າງ 0 ຫາ 100.
     .transparency-mode-on = ປ້ອນໂໝດຄວາມໂປ່ງໃສ [ON/OFF] <ON>:
     .transparency-mode-off = ປ້ອນໂໝດຄວາມໂປ່ງໃສ [ON/OFF] <OFF>:
     .xref-attach-menu = ແນບ...
@@ -4639,13 +4650,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: ບໍ່ມີ xdata.
     .value-3d-orbit = ໝູນມຸມມອງ 3D (3D Orbit)
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: ລາກດ້ວຍປຸ່ມເມົາສ໌ຂວາ.
-    .adjust-brightness-contrast-fade = ADJUST  [ຄວາມສະຫວ່າງ / ຄວາມຄົມຊັດ / ຄວາມຈາງ]:
-    .adjust-brightness-0-100 = ADJUST  ຄວາມສະຫວ່າງ 0-100:
-    .adjust-contrast-0-100 = ADJUST  ຄວາມຄົມຊັດ 0-100:
-    .adjust-fade-0-100 = ADJUST  ຄວາມຈາງ 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: ເລືອກຮູບພາບແຣັສເຕີກ່ອນ.
-    .adjust-value-must-be-0-100 = ADJUST: ຄ່າຕ້ອງຢູ່ລະຫວ່າງ 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ ໃນ __ocs_fmt_2__ ຮູບພາບ.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  ຄ່າໃໝ່ [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: ປ້ອນ 0 ຫຼື 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  ຄ່າໃໝ່ [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = ຊັ້ນຮອງພື້ນ __ocs_fmt_0__: ຄວາມຈາງ=__ocs_fmt_1__, ຄວາມຄົມຊັດ=__ocs_fmt_2__, ເປີດ=__ocs_fmt_3__, ຕັດຂອບ=__ocs_fmt_4__, ຂາວດໍາ=__ocs_fmt_5__
     .updated-changed-underlay-s = ອັບເດດແລ້ວ __ocs_fmt_0__ ຊັ້ນຮອງພື້ນ.
-    .usage-adjust-brightness-contrast-fade-0-100 = ວິທີໃຊ້: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = ວິທີໃຊ້: ANNOSCALE <ອັດຕາສ່ວນ>  ເຊັ່ນ 1:50, 2:1, ຫຼື ຕົວຄູນ
     .usage-draworder-f-front-b-back-a-above-handle = ວິທີໃຊ້: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = ວິທີໃຊ້: HYPERLINK <url>   (ເລືອກວັດຖຸກ່ອນ)

locales/nl-NL/opencadstudio.ftl

@@ -1079,7 +1079,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: voer Left, Top of Right in.
     .isodraft-expected-on-or-off = ISODRAFT: voer On of Off in.
     .xdata-selected-entities-are-on-locked-layers = XDATA: geselecteerde objecten staan op vergrendelde lagen.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: geen rasterafbeeldingen geselecteerd of onbekende eigenschap (gebruik BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: voer een geheel getal van -4 tot en met 4 in.
     .usage-datalink-path-to-csv = Gebruik: DATALINK <pad-naar-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: geen gekoppelde tabellen gevonden.
@@ -3916,6 +3915,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Selecteer afbeelding of onderlegger:
+    .adjust-select-pdf-underlay = Selecteer PDF-onderlegger:
+    .adjust-select-dwf-underlay = Selecteer DWF-onderlegger:
+    .adjust-select-dgn-underlay = Selecteer DGN-onderlegger:
+    .adjust-mixed-underlays = *Ongeldige selectieset. Selecteer alleen onderleggers van hetzelfde bestandstype.*
+    .adjust-image-option = Voer afbeeldingsoptie in [Contrast/Transparantie/Helderheid] <Helderheid>:
+    .adjust-underlay-option = Voer __ocs_arg_kind__-onderleggeroptie in [Transparantie/Contrast/Monochroom] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochroom? [Ja/Nee] <__ocs_arg_value__>:
+    .adjust-brightness-value = Voer waarde voor helderheid in (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Voer waarde voor contrast in (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Voer waarde voor transparantie in (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = De waarde moet een geheel getal tussen 0 en 100 zijn.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4644,13 +4655,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: geen xdata.
     .value-3d-orbit = 3D-baan
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: sleep met de rechter muisknop.
-    .adjust-brightness-contrast-fade = ADJUST  [Helderheid / Contrast / Vervagen]:
-    .adjust-brightness-0-100 = ADJUST  helderheid 0-100:
-    .adjust-contrast-0-100 = ADJUST contrast 0-100:
-    .adjust-fade-0-100 = ADJUST  vervaging 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: selecteer eerst rasterafbeelding(s).
-    .adjust-value-must-be-0-100 = ADJUST: waarde moet 0-100 zijn.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ op __ocs_fmt_2__ image(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  nieuwe waarde [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: vul 0 of 1 in.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  nieuwe waarde [-4..4]:
@@ -4776,7 +4780,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Onderlaag __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Bijgewerkt __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Gebruik: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Gebruik: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Gebruik: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Gebruik: HYPERLINK <url>   (select objects first)

locales/pl-PL/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: wpisz Left, Top lub Right.
     .isodraft-expected-on-or-off = ISODRAFT: wpisz On lub Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: zaznaczone obiekty znajdują się na zablokowanych warstwach.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: brak zaznaczonych obrazów rastrowych lub nieznana właściwość (użyj BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: wpisz liczbę całkowitą od -4 do 4.
     .usage-datalink-path-to-csv = Użycie: DATALINK <ścieżka-do-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nie znaleziono połączonych tabel.
@@ -3917,6 +3916,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Wybierz obraz lub podkład:
+    .adjust-select-pdf-underlay = Wybierz podkład PDF:
+    .adjust-select-dwf-underlay = Wybierz podkład DWF:
+    .adjust-select-dgn-underlay = Wybierz podkład DGN:
+    .adjust-mixed-underlays = *Nieprawidłowy zbiór wskazań. Wybierz tylko podkłady tego samego typu pliku.*
+    .adjust-image-option = Podaj opcję obrazu [Kontrast/Zniknąć/Jasność] <Jasność>:
+    .adjust-underlay-option = Podaj opcję podkładu __ocs_arg_kind__ [Zniknąć/Kontrast/Monochromatyczny] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochromatyczny? [Tak/Nie] <__ocs_arg_value__>:
+    .adjust-brightness-value = Podaj wartość: jasność (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Podaj wartość: kontrast (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Podaj wartość: zniknąć (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Wartość musi być liczbą całkowitą z zakresu od 0 do 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4645,13 +4656,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: brak xdata.
     .value-3d-orbit =Orbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Orbita 3D: przeciągnij prawym przyciskiem myszy.
-    .adjust-brightness-contrast-fade = ADJUST [Jasność / Kontrast / Zanik]:
-    .adjust-brightness-0-100 = ADJUST jasność 0-100:
-    .adjust-contrast-0-100 = ADJUST kontrast 0-100:
-    .adjust-fade-0-100 = ADJUST zanikanie 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: najpierw wybierz obrazy rastrowe.
-    .adjust-value-must-be-0-100 = ADJUST: wartość musi wynosić 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ na obrazach __ocs_fmt_2__.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE nowa wartość [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: wprowadź 0 lub 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE nowa wartość [-4..4]:
@@ -4777,7 +4781,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Podkład __ocs_fmt_0__: fade=__ocs_fmt_1__, kontrast=__ocs_fmt_2__, on=__ocs_fmt_3__, klip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Zaktualizowano podkładki __ocs_fmt_0__.
-    .usage-adjust-brightness-contrast-fade-0-100 = Zastosowanie: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Zastosowanie: ANNOSCALE <ratio> np. 1:50, 2:1 lub współczynnik
     .usage-draworder-f-front-b-back-a-above-handle = Zastosowanie: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Sposób użycia: HYPERLINK <url> (najpierw wybierz obiekty)

locales/pt-BR/opencadstudio.ftl

@@ -1081,7 +1081,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: digite Left, Top ou Right.
     .isodraft-expected-on-or-off = ISODRAFT: digite On ou Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: as entidades selecionadas estão em camadas bloqueadas.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nenhuma imagem raster selecionada ou propriedade desconhecida (use BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: digite um inteiro de -4 a 4.
     .usage-datalink-path-to-csv = Uso: DATALINK <caminho-do-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nenhuma tabela vinculada encontrada.
@@ -3919,6 +3918,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Selecione uma imagem ou referência subjacente:
+    .adjust-select-pdf-underlay = Selecione uma referência subjacente PDF:
+    .adjust-select-dwf-underlay = Selecione uma referência subjacente DWF:
+    .adjust-select-dgn-underlay = Selecione uma referência subjacente DGN:
+    .adjust-mixed-underlays = *Conjunto de seleção inválido. Selecione apenas referências subjacentes do mesmo tipo de arquivo.*
+    .adjust-image-option = Insira a opção de imagem [Contraste/Esmaecimento/Brilho] <Brilho>:
+    .adjust-underlay-option = Insira a opção de referência subjacente __ocs_arg_kind__ [Esmaecimento/Contraste/Monocromático] <__ocs_arg_option__>:
+    .adjust-monochrome = Monocromático? [Sim/Não] <__ocs_arg_value__>:
+    .adjust-brightness-value = Insira o valor de brilho (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Insira o valor de contraste (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Insira o valor de esmaecimento (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = O valor deve ser um número inteiro entre 0 e 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4646,13 +4657,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: sem dados estendidos.
     .value-3d-orbit = Órbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Órbita 3D: arraste com o botão direito do mouse.
-    .adjust-brightness-contrast-fade = ADJUST  [Brilho / Contraste / Esmaecimento]:
-    .adjust-brightness-0-100 = ADJUST  brilho 0-100:
-    .adjust-contrast-0-100 = ADJUST  contraste 0-100:
-    .adjust-fade-0-100 = ADJUST  esmaecimento 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: selecione primeiro as imagens raster.
-    .adjust-value-must-be-0-100 = ADJUST: o valor deve estar entre 0 e 100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ em __ocs_fmt_2__ imagens.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  novo valor [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: insira 0 ou 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  novo valor [-4..4]:
@@ -4778,7 +4782,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Subjacência __ocs_fmt_0__: esmaecimento=__ocs_fmt_1__, contraste=__ocs_fmt_2__, ligada=__ocs_fmt_3__, delimitada=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ subjacências atualizadas.
-    .usage-adjust-brightness-contrast-fade-0-100 = Uso: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Uso: ANNOSCALE <proporção> por exemplo, 1:50, 2:1 ou um fator
     .usage-draworder-f-front-b-back-a-above-handle = Uso: DRAWORDER F|FRONT | B|BACK | A|ABOVE <identificador> | U|UNDER <identificador>
     .usage-hyperlink-url-select-objects-first = Uso: HYPERLINK <url> (selecione primeiro os objetos)

locales/ru-RU/opencadstudio.ftl

@@ -1084,7 +1084,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: введите Left, Top или Right.
     .isodraft-expected-on-or-off = ISODRAFT: введите On или Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: выбранные объекты находятся на заблокированных слоях.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: растровые изображения не выбраны или свойство неизвестно (используйте BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: введите целое число от -4 до 4.
     .usage-datalink-path-to-csv = Использование: DATALINK <путь-к-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: связанные таблицы не найдены.
@@ -3919,6 +3918,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Выберите изображение или подложку:
+    .adjust-select-pdf-underlay = Выберите подложку PDF:
+    .adjust-select-dwf-underlay = Выберите подложку DWF:
+    .adjust-select-dgn-underlay = Выберите подложку DGN:
+    .adjust-mixed-underlays = *Недопустимый набор. Выберите только подложки одного типа файлов.*
+    .adjust-image-option = Введите параметр изображения [контраст/Угасание/Яркость] <Яркость>:
+    .adjust-underlay-option = Введите параметр подложки __ocs_arg_kind__ [Угасание/контраст/Монохромный] <__ocs_arg_option__>:
+    .adjust-monochrome = Монохромный? [Да/Нет] <__ocs_arg_value__>:
+    .adjust-brightness-value = Введите значение: яркость (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Введите значение: контраст (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Введите значение: угасание (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Значение должно быть целым числом от 0 до 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4647,13 +4658,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: нет данных.
     .value-3d-orbit = 3D орбитальная
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: перетащите правой кнопкой мыши.
-    .adjust-brightness-contrast-fade = ADJUST  [Яркость / Контраст / Фаде]:
-    .adjust-brightness-0-100 = ADJUST  яркость 0-100:
-    .adjust-contrast-0-100 = ADJUST  Контраст 0-100:
-    .adjust-fade-0-100 = ADJUST  выцветание 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: сначала выберите растровое изображение(и).
-    .adjust-value-must-be-0-100 = ADJUST: значение должно быть 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ на __ocs_fmt_2__ изображении(ах).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  новое значение [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: введите 0 или 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  новое значение [-4..4]:
@@ -4779,7 +4783,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Подложка __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Обновлено __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Использование: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Использование: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Использование: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Использование: HYPERLINK <url>   (select objects first)

locales/tr-TR/opencadstudio.ftl

@@ -1067,7 +1067,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top veya Right girin.
     .isodraft-expected-on-or-off = ISODRAFT: On veya Off girin.
     .xdata-selected-entities-are-on-locked-layers = XDATA: seçilen nesneler kilitli katmanlarda.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: raster görüntü seçilmedi veya özellik bilinmiyor (BRIGHTNESS/CONTRAST/FADE kullanın).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4 ile 4 arasında bir tamsayı girin.
     .usage-datalink-path-to-csv = Kullanım: DATALINK <.csv-dosya-yolu>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: bağlantılı tablo bulunamadı.
@@ -3884,6 +3883,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Görüntüleri seçin:
+    .adjust-select-image-or-underlay = Görüntü veya altlık seçin:
+    .adjust-select-pdf-underlay = PDF altlığı seçin:
+    .adjust-select-dwf-underlay = DWF altlığı seçin:
+    .adjust-select-dgn-underlay = DGN altlığı seçin:
+    .adjust-mixed-underlays = *Geçersiz seçim kümesi. Yalnız aynı dosya türündeki altlık nesnelerini seçin.*
+    .adjust-image-option = Görüntü seçeneğini girin [Karşıtlık/Solukluk/Parlaklık] <Parlaklık>:
+    .adjust-underlay-option = __ocs_arg_kind__ altlık seçeneğini girin [Solukluk/Karşıtlık/Tek Renkli] <__ocs_arg_option__>:
+    .adjust-monochrome = Tek Renkli? [Evet/Hayır] <__ocs_arg_value__>:
+    .adjust-brightness-value = Parlaklık değerini girin (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Karşıtlık değerini girin (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Solukluk değerini girin (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Değer 0 ile 100 arasında bir tam sayı olmalıdır.
     .transparency-mode-on = Saydamlık modunu girin [ON/OFF] <ON>:
     .transparency-mode-off = Saydamlık modunu girin [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4597,13 +4608,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: xdata yok.
     .value-3d-orbit = 3B Yörünge
     .value-3d-orbit-drag-with-right-mouse-button = 3B Yörünge: sağ fare düğmesiyle sürükleyin.
-    .adjust-brightness-contrast-fade = ADJUST  [Parlaklık / Karşıtlık / Solma]:
-    .adjust-brightness-0-100 = ADJUST  Parlaklık 0-100:
-    .adjust-contrast-0-100 = ADJUST  Karşıtlık 0-100:
-    .adjust-fade-0-100 = ADJUST  Solma 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: önce raster görüntüleri seçin.
-    .adjust-value-must-be-0-100 = ADJUST: değer 0 ile 100 arasında olmalıdır.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_2__ görüntüde __ocs_fmt_0__ = __ocs_fmt_1__ olarak değiştirildi.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  Yeni değer [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 veya 1 girin.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  Yeni değer [-4..4]:
@@ -4723,7 +4727,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Altlık __ocs_fmt_0__: solukluk=__ocs_fmt_1__, karşıtlık=__ocs_fmt_2__, açık=__ocs_fmt_3__, kırp=__ocs_fmt_4__, tek renk=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ altlık güncellendi.
-    .usage-adjust-brightness-contrast-fade-0-100 = Kullanım: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Kullanım: ANNOSCALE <ratio> ör. 1:50, 2:1 veya bir katsayı
     .usage-draworder-f-front-b-back-a-above-handle = Kullanım: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Kullanım: HYPERLINK <url> (önce nesneleri seçin)

locales/zh-CN/opencadstudio.ftl

@@ -1068,7 +1068,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE：请输入 Left、Top 或 Right。
     .isodraft-expected-on-or-off = ISODRAFT：请输入 On 或 Off。
     .xdata-selected-entities-are-on-locked-layers = XDATA：选定实体位于锁定的图层上。
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST：未选择光栅图像或属性未知（使用 BRIGHTNESS/CONTRAST/FADE）。
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE：请输入 -4 到 4 之间的整数。
     .usage-datalink-path-to-csv = 用法：DATALINK <.csv文件路径>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE：未找到链接表格。
@@ -3901,6 +3900,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = 选择图像或参考底图:
+    .adjust-select-pdf-underlay = 选择 PDF 参考底图:
+    .adjust-select-dwf-underlay = 选择 DWF 参考底图:
+    .adjust-select-dgn-underlay = 选择 DGN 参考底图:
+    .adjust-mixed-underlays = *选择集无效。请仅选择相同文件类型的参考底图。*
+    .adjust-image-option = 输入图像选项 [对比度/变暗/亮度] <亮度>:
+    .adjust-underlay-option = 输入 __ocs_arg_kind__ 参考底图选项 [变暗/对比度/单色] <__ocs_arg_option__>:
+    .adjust-monochrome = 单色? [是/否] <__ocs_arg_value__>:
+    .adjust-brightness-value = 输入亮度值 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = 输入对比度值 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = 输入变暗值 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 值必须是介于 0 和 100 之间的整数。
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4629,13 +4640,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__:无xdata.
     .value-3d-orbit = 三维动态观察
     .value-3d-orbit-drag-with-right-mouse-button = 三维轨道:用鼠标右键拖动.
-    .adjust-brightness-contrast-fade = ADJUST  [光亮/对比/淡:
-    .adjust-brightness-0-100 = ADJUST  亮度 0-100 :
-    .adjust-contrast-0-100 = ADJUST  对比 0-100 :
-    .adjust-fade-0-100 = ADJUST  淡出 0- 100 :
-    .adjust-select-raster-image-s-first = ADJUST:先选择光栅图像。
-    .adjust-value-must-be-0-100 = ADJUST:值必须是0-100。
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__= __ocs_fmt_1__在__ocs_fmt_2__图像上。
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE 新值 [0/1]：
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 输入 0 或 1 。
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE 新值 [-4..4]：
@@ -4761,7 +4765,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__=__ocs_fmt_1__(简体中文)
     .underlay-x-fade-contrast-on-clip-mono = 内饰 __ocs_fmt_0__: 淡出=( 淡出=)__ocs_fmt_1__,对比=__ocs_fmt_2__打开=__ocs_fmt_3__,夹=__ocs_fmt_4__单数=__ocs_fmt_5__
     .updated-changed-underlay-s = 已更新 __ocs_fmt_0__ 内置 。
-    .usage-adjust-brightness-contrast-fade-0-100 = 用法： ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 用法： ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = 用法： DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 用法： HYPERLINK <url>   (select objects first)

locales/zh-TW/opencadstudio.ftl

@@ -1080,7 +1080,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE：請輸入 Left、Top 或 Right。
     .isodraft-expected-on-or-off = ISODRAFT：請輸入 On 或 Off。
     .xdata-selected-entities-are-on-locked-layers = XDATA：選取的實體位於鎖定的圖層上。
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST：未選取點陣影像或屬性不明（使用 BRIGHTNESS/CONTRAST/FADE）。
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE：請輸入 -4 到 4 之間的整數。
     .usage-datalink-path-to-csv = 用法：DATALINK <.csv檔案路徑>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE：找不到連結的表格。
@@ -3913,6 +3912,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = 選取影像或參考底圖:
+    .adjust-select-pdf-underlay = 選取 PDF 參考底圖:
+    .adjust-select-dwf-underlay = 選取 DWF 參考底圖:
+    .adjust-select-dgn-underlay = 選取 DGN 參考底圖:
+    .adjust-mixed-underlays = *選取集無效。請只選取相同檔案類型的參考底圖。*
+    .adjust-image-option = 輸入影像選項 [對比度/變暗/亮度] <亮度>:
+    .adjust-underlay-option = 輸入 __ocs_arg_kind__ 參考底圖選項 [變暗/對比度/單色] <__ocs_arg_option__>:
+    .adjust-monochrome = 單色? [是/否] <__ocs_arg_value__>:
+    .adjust-brightness-value = 輸入亮度值 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = 輸入對比度值 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = 輸入變暗值 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 值必須是介於 0 和 100 之間的整數。
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4641,13 +4652,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__:無xdata.
     .value-3d-orbit = 三維動態觀察
     .value-3d-orbit-drag-with-right-mouse-button = 三維軌道:用滑鼠右鍵拖動.
-    .adjust-brightness-contrast-fade = ADJUST  [光亮/對比/淡:
-    .adjust-brightness-0-100 = ADJUST  亮度 0-100 :
-    .adjust-contrast-0-100 = ADJUST  對比 0-100 :
-    .adjust-fade-0-100 = ADJUST  淡出 0- 100 :
-    .adjust-select-raster-image-s-first = ADJUST:先選擇光柵圖像。
-    .adjust-value-must-be-0-100 = ADJUST:值必須是0-100。
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__= __ocs_fmt_1__在__ocs_fmt_2__圖像上。
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE 新值 [0/1]：
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 輸入 0 或 1 。
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE 新值 [-4..4]：
@@ -4773,7 +4777,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__=__ocs_fmt_1__(簡體中文)
     .underlay-x-fade-contrast-on-clip-mono = 內飾 __ocs_fmt_0__: 淡出=( 淡出=)__ocs_fmt_1__,對比=__ocs_fmt_2__開啟=__ocs_fmt_3__,夾=__ocs_fmt_4__單數=__ocs_fmt_5__
     .updated-changed-underlay-s = 已更新 __ocs_fmt_0__ 內置 。
-    .usage-adjust-brightness-contrast-fade-0-100 = 用法： ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 用法： ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = 用法： DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 用法： HYPERLINK <url>   (select objects first)

src/app/command_driver/utilities.rs

@@ -507,6 +507,32 @@ impl OpenCADStudio {
         StepInput::SelectionComplete(kept)
     }
 
+    /// Keeps only the kinds of object the active command takes, dropping
+    /// the rest of a completed selection silently.
+    fn filter_command_entity_selection(&mut self, input: StepInput) -> StepInput {
+        let StepInput::SelectionComplete(handles) = input else {
+            return input;
+        };
+        let i = self.active_tab;
+        let Some(keep) = self.tabs[i]
+            .active_cmd
+            .as_ref()
+            .and_then(|command| command.selection_entity_filter())
+        else {
+            return StepInput::SelectionComplete(handles);
+        };
+        let (kept, dropped): (Vec<Handle>, Vec<Handle>) = handles
+            .into_iter()
+            .partition(|h| self.tabs[i].scene.document.get_entity(*h).is_some_and(keep));
+        for handle in &dropped {
+            self.tabs[i].scene.deselect_entity(*handle);
+        }
+        if !dropped.is_empty() {
+            self.refresh_properties();
+        }
+        StepInput::SelectionComplete(kept)
+    }
+
     /// Drops locked point clouds from a completed selection when the active
     /// command would move them, saying which were locked and how many went.
     fn filter_locked_point_cloud_selection(&mut self, input: StepInput) -> StepInput {
@@ -562,6 +588,7 @@ impl OpenCADStudio {
         let input = self.filter_associative_dimension_selection(input);
         let input = self.filter_block_reference_selection(input);
         let input = self.filter_locked_point_cloud_selection(input);
+        let input = self.filter_command_entity_selection(input);
         // XCLIP / CLIP learn which chosen references carry a clip already.
         {
             let i = self.active_tab;

src/app/commands/display.rs

@@ -1381,101 +1381,120 @@ impl OpenCADStudio {
                 return Some(Task::none());
             }
 
-            // ADJUST — set brightness / contrast / fade on selected raster images
-            //   ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
-            "ADJUST" => {
-                use crate::command::SelectThenKeywordCommand;
-                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
-                let c = SelectThenKeywordCommand::new(
-                    "ADJUST",
-                    "ADJUST  [Brightness / Contrast / Fade]:",
-                    vec![
-                        (
-                            "Brightness",
-                            "BRIGHTNESS",
-                            Some("ADJUST  brightness 0-100:"),
-                        ),
-                        ("Contrast", "CONTRAST", Some("ADJUST  contrast 0-100:")),
-                        ("Fade", "FADE", Some("ADJUST  fade 0-100:")),
-                    ],
-                    has_sel,
-                );
-                self.command_line.push_info(&c.prompt());
-                self.tabs[i].active_cmd = Some(Box::new(c));
-            }
-            cmd if cmd.starts_with("ADJUST ") => {
-                let rest = cmd.trim_start_matches("ADJUST").trim();
-                let parts: Vec<&str> = rest.splitn(2, char::is_whitespace).collect();
-                let action = parts.first().map(|s| s.to_uppercase()).unwrap_or_default();
-                let arg = parts.get(1).copied().unwrap_or("").trim();
-                let handles: Vec<codec::Handle> = self.tabs[i]
+            // ADJUST / -IMAGEADJUST / PDFADJUST / DWFADJUST / DGNADJUST:
+            // chosen images or underlays (pickfirst first), then the option
+            // and the value.
+            "ADJUST" | "-IMAGEADJUST" | "PDFADJUST" | "DWFADJUST" | "DGNADJUST" => {
+                let mode = match cmd {
+                    "-IMAGEADJUST" => "I",
+                    "PDFADJUST" => "P",
+                    "DWFADJUST" => "W",
+                    "DGNADJUST" => "G",
+                    _ => "A",
+                };
+                let keep = crate::modules::insert::xadjust::keeps(mode);
+                let chosen: Vec<codec::Handle> = self.tabs[i]
                     .scene
                     .selected_entities()
-                    .iter()
-                    .map(|(h, _)| *h)
-                    .filter(|handle| !self.tabs[i].scene.is_layer_locked(*handle))
+                    .into_iter()
+                    .filter(|(_, e)| keep(e))
+                    .map(|(h, _)| h)
                     .collect();
-                if handles.is_empty() {
-                    self.command_line
-                        .push_error(crate::t!("ADJUST: select raster image(s) first.").as_ref());
-                } else if action.is_empty() {
-                    self.command_line.push_info(
-                        crate::t!("Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>").as_ref(),
-                    );
-                } else if let Ok(v) = arg.parse::<u8>() {
-                    let v = v.min(100);
-                    self.push_undo_snapshot(i, "ADJUST");
-                    let mut changed = 0usize;
-                    let mut changed_handles = Vec::new();
-                    for h in &handles {
-                        if let Some(codec::EntityType::RasterImage(img)) = self.tabs[i]
-                            .scene
-                            .document
-                            .entities_mut()
-                            .find(|e| e.common().handle == *h)
-                        {
-                            match action.as_str() {
-                                "BRIGHTNESS" => {
-                                    img.brightness = v;
-                                    changed += 1;
-                                    changed_handles.push(*h);
-                                }
-                                "CONTRAST" => {
-                                    img.contrast = v;
-                                    changed += 1;
-                                    changed_handles.push(*h);
-                                }
-                                "FADE" => {
-                                    img.fade = v;
-                                    changed += 1;
-                                    changed_handles.push(*h);
-                                }
-                                _ => {}
-                            }
-                        }
-                    }
-                    if changed > 0 {
-                        self.tabs[i].dirty = true;
-                        for &handle in &changed_handles {
-                            self.tabs[i].scene.reseed_derived_caches(handle);
-                        }
-                        let changes: Vec<_> = changed_handles
-                            .into_iter()
-                            .map(|handle| (handle, crate::scene::ChangeKind::Modified))
-                            .collect();
-                        self.tabs[i].scene.bump_entities(&changes);
-                        self.command_line.push_output(
-                            crate::tf!("ADJUST: {action} = {v} on {changed} image(s).").as_ref(),
-                        );
-                    } else {
-                        self.command_line.push_error(
-                            crate::t!("ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE).").as_ref(),
-                        );
-                    }
-                } else {
-                    self.command_line
-                        .push_error(crate::t!("ADJUST: value must be 0-100.").as_ref());
+                if !chosen.is_empty() {
+                    self.tabs[i]
+                        .scene
+                        .replace_selection(chosen.into_iter().collect());
+                    return Some(self.dispatch_command(&format!("_ADJUSTSEL {mode}")));
                 }
+                self.start_adjust_selection(i, cmd, mode);
+            }
+            // The gathered objects: one kind at a time, then the option.
+            c if c.starts_with("_ADJUSTSEL ") => {
+                use crate::command::CadCommand;
+                use crate::modules::insert::xadjust::{self, AdjustCommand};
+                let mode = c["_ADJUSTSEL ".len()..].trim().to_string();
+                let keep = xadjust::keeps(&mode);
+                let name = xadjust::command_name(&mode);
+                let objects: Vec<(codec::Handle, codec::EntityType)> = self.tabs[i]
+                    .scene
+                    .selected_entities()
+                    .into_iter()
+                    .filter(|(h, e)| keep(e) && !self.tabs[i].scene.is_layer_locked(*h))
+                    .map(|(h, e)| (h, e.clone()))
+                    .collect();
+                match AdjustCommand::for_objects(&objects) {
+                    None => {}
+                    Some(Err(message)) => {
+                        self.command_line.push_error(crate::t!(message).as_ref());
+                        self.start_adjust_selection(i, name, &mode);
+                    }
+                    Some(Ok(command)) => {
+                        self.command_line.push_info(&command.prompt());
+                        self.command_line.set_step_options(command.options());
+                        self.tabs[i].active_cmd = Some(Box::new(command));
+                    }
+                }
+                // Repeating runs the command, not this step.
+                return Some(self.finish_dispatch(name));
+            }
+            // `_ADJUSTAPPLY <BRIGHTNESS|CONTRAST|FADE|MONOCHROME> <value> <handles…>`
+            // writes the value to every listed image or underlay, one undo step.
+            c if c.starts_with("_ADJUSTAPPLY ") => {
+                let mut parts = c.split_whitespace().skip(1);
+                let prop = parts.next().unwrap_or("").to_string();
+                let value: u8 = parts.next().and_then(|v| v.parse().ok()).unwrap_or(0);
+                let handles: Vec<codec::Handle> = parts
+                    .filter_map(|h| u64::from_str_radix(h, 16).ok())
+                    .map(codec::Handle::new)
+                    .collect();
+                self.push_undo_snapshot(i, "ADJUST");
+                let mut changed = Vec::new();
+                for h in &handles {
+                    let done = match self.tabs[i].scene.document.get_entity_mut(*h) {
+                        Some(codec::EntityType::RasterImage(img)) => match prop.as_str() {
+                            "BRIGHTNESS" => {
+                                img.brightness = value;
+                                true
+                            }
+                            "CONTRAST" => {
+                                img.contrast = value;
+                                true
+                            }
+                            "FADE" => {
+                                img.fade = value;
+                                true
+                            }
+                            _ => false,
+                        },
+                        Some(codec::EntityType::Underlay(u)) => match prop.as_str() {
+                            "CONTRAST" => {
+                                u.set_contrast(value);
+                                true
+                            }
+                            "FADE" => {
+                                u.set_fade(value);
+                                true
+                            }
+                            "MONOCHROME" => {
+                                u.set_monochrome(value != 0);
+                                true
+                            }
+                            _ => false,
+                        },
+                        _ => false,
+                    };
+                    if done {
+                        self.tabs[i].scene.reseed_derived_caches(*h);
+                        changed.push((*h, crate::scene::ChangeKind::Modified));
+                    }
+                }
+                if !changed.is_empty() {
+                    self.tabs[i].scene.bump_entities(&changed);
+                    self.tabs[i].dirty = true;
+                }
+                // The command used the set up; nothing stays chosen.
+                self.tabs[i].scene.deselect_all();
+                self.refresh_properties();
             }
 
             // ANNOSCALE / CANNOSCALE <ratio> — set the current annotation scale
@@ -2206,6 +2225,26 @@ pub(crate) fn table_to_csv(table: &codec::entities::Table) -> String {
         .join("\r\n")
 }
 
+impl OpenCADStudio {
+    /// The ADJUST family's object prompt, keeping only the kinds `mode`
+    /// takes (see `xadjust::keeps`).
+    fn start_adjust_selection(&mut self, i: usize, name: &str, mode: &str) {
+        use crate::command::CadCommand;
+        use crate::modules::insert::xadjust;
+        self.tabs[i].scene.deselect_all();
+        self.refresh_properties();
+        let command = crate::modules::draw::select::SelectObjectsCommand::filtered(
+            name,
+            &format!("_ADJUSTSEL {mode}"),
+            xadjust::select_prompt(mode),
+            xadjust::keeps(mode),
+        );
+        self.command_line.push_info(&command.prompt());
+        self.command_line.set_step_options(command.options());
+        self.tabs[i].active_cmd = Some(Box::new(command));
+    }
+}
+
 #[cfg(test)]
 mod tests {
     use crate::app::OpenCADStudio;

src/app/update/command.rs

@@ -3809,7 +3809,9 @@ impl OpenCADStudio {
                         return Task::none();
                     }
                 }
-                if field.starts_with("ul_") {
+                if field.starts_with("ul_")
+                    || matches!(field, "ri_bright" | "ri_contrast" | "ri_fade")
+                {
                     if let Err(message) = crate::entities::underlay::validate_property(field, &val)
                     {
                         self.command_line.push_error(message);

src/command.rs

@@ -2960,6 +2960,12 @@ pub trait CadCommand: Send {
         false
     }
 
+    /// The kinds of object the command takes (ADJUST): the host drops the
+    /// rest of each completed selection without a word.
+    fn selection_entity_filter(&self) -> Option<fn(&EntityType) -> bool> {
+        None
+    }
+
     /// The command takes block references only (XCLIP): the host drops the
     /// rest and says how many were ineligible.
     fn selection_keeps_block_references(&self) -> bool {

src/entities/raster_image.rs

@@ -333,7 +333,20 @@ impl PropertyEditable for RasterImage {
             .contains(codec::entities::ImageDisplayFlags::USE_CLIPPING_BOUNDARY);
         let clip_inverted = self.clip_boundary.clip_mode == codec::entities::ClipMode::Inside;
         let transparency = self.common.transparency.to_string();
+        let whole = |label: &str, field: &'static str, value: u8| Property {
+            label: t!(label).into_owned(),
+            field,
+            value: PropValue::EditText(value.to_string()),
+        };
         vec![
+            PropSection {
+                title: t!("Image Adjust").into_owned(),
+                props: vec![
+                    whole("Brightness", "ri_bright", self.brightness),
+                    whole("Contrast", "ri_contrast", self.contrast),
+                    whole("Fade", "ri_fade", self.fade),
+                ],
+            },
             PropSection {
                 title: t!("Geometry").into_owned(),
                 props: vec![
@@ -362,13 +375,6 @@ impl PropertyEditable for RasterImage {
                 title: t!("Misc").into_owned(),
                 props: vec![
                     ro(t!("Name").as_ref(), "ri_name", self.file_name().to_string()),
-                    edit(
-                        t!("Brightness").as_ref(),
-                        "ri_bright",
-                        self.brightness as f64,
-                    ),
-                    edit(t!("Contrast").as_ref(), "ri_contrast", self.contrast as f64),
-                    edit(t!("Fade").as_ref(), "ri_fade", self.fade as f64),
                     ro(t!("Transparency").as_ref(), "ri_transparency", transparency),
                     Property {
                         label: t!("Show image").into_owned(),
@@ -449,9 +455,10 @@ impl PropertyEditable for RasterImage {
             "ri_ox" => self.insertion_point.x = v,
             "ri_oy" => self.insertion_point.y = v,
             "ri_oz" => self.insertion_point.z = v,
-            "ri_bright" => self.brightness = v.clamp(0.0, 100.0) as u8,
-            "ri_contrast" => self.contrast = v.clamp(0.0, 100.0) as u8,
-            "ri_fade" => self.fade = v.clamp(0.0, 100.0) as u8,
+            // Out-of-range values are refused before they get here.
+            "ri_bright" if (0.0..=100.0).contains(&v) => self.brightness = v as u8,
+            "ri_contrast" if (0.0..=100.0).contains(&v) => self.contrast = v as u8,
+            "ri_fade" if (0.0..=100.0).contains(&v) => self.fade = v as u8,
             _ => {}
         }
     }

src/entities/underlay.rs

@@ -227,7 +227,8 @@ fn parse_flag(value: &str, current: bool) -> bool {
 pub(crate) fn validate_property(field: &str, value: &str) -> Result<(), &'static str> {
     let number = || value.trim().parse::<f64>().ok();
     match field {
-        "ul_contrast" | "ul_fade" => match number() {
+        // A raster image's Image Adjust rows take the same range.
+        "ul_contrast" | "ul_fade" | "ri_bright" | "ri_contrast" | "ri_fade" => match number() {
             Some(v) if (0.0..=100.0).contains(&v) && v.fract() == 0.0 => Ok(()),
             _ => Err("Value must be an integer between 0 and 100"),
         },

src/locale_catalog.rs

@@ -557,13 +557,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "ACI:" => Some(("styles", "aci")),
         "ADDSELECTED: creating a new {kind} is not supported." => Some(("inquiry", "addselected-creating-a-new-kind-is-not-support")),
         "ADDSELECTED: selected object not found." => Some(("inquiry", "addselected-selected-object-not-found")),
-        "ADJUST  [Brightness / Contrast / Fade]:" => Some(("view", "adjust-brightness-contrast-fade")),
-        "ADJUST  brightness 0-100:" => Some(("view", "adjust-brightness-0-100")),
-        "ADJUST  contrast 0-100:" => Some(("view", "adjust-contrast-0-100")),
-        "ADJUST  fade 0-100:" => Some(("view", "adjust-fade-0-100")),
-        "ADJUST: select raster image(s) first." => Some(("view", "adjust-select-raster-image-s-first")),
-        "ADJUST: value must be 0-100." => Some(("view", "adjust-value-must-be-0-100")),
-        "ADJUST: {action} = {v} on {changed} image(s)." => Some(("view", "adjust-action-v-on-changed-image-s")),
         "ALIGN  Scale objects based on alignment points? [Y/N]:" => Some(("modify", "align-scale-objects-based-on-alignment-points")),
         "ALIGN  Select objects (%{count} selected, Enter when done):" => Some(("modify", "align-select-objects-count-selected-enter-when")),
         "ALIGN  Specify 1st destination point:" => Some(("modify", "align-specify-1st-destination-point")),
@@ -3487,7 +3480,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Updated {changed} underlay(s)." => Some(("view", "updated-changed-underlay-s")),
         "Upper" => Some(("annotate", "upper")),
         "Upside down" => Some(("common", "upside-down")),
-        "Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>" => Some(("view", "usage-adjust-brightness-contrast-fade-0-100")),
         "Usage: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor" => Some(("view", "usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor")),
         "Usage: ATTDISP ON | OFF | NORMAL" => Some(("draw", "usage-attdisp-on-off-normal")),
         "Usage: ATTSYNC <block name>.  Blocks: {}" => Some(("insert", "usage-attsync-block-name-blocks")),
@@ -3748,6 +3740,18 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Attach DWG" => Some(("insert", "xref-attach-dwg")),
         "Attach Image" => Some(("insert", "xref-attach-image")),
         "Select image(s):" => Some(("insert", "select-images")),
+        "Select image or underlay:" => Some(("insert", "adjust-select-image-or-underlay")),
+        "Select PDF underlay:" => Some(("insert", "adjust-select-pdf-underlay")),
+        "Select DWF underlay:" => Some(("insert", "adjust-select-dwf-underlay")),
+        "Select DGN underlay:" => Some(("insert", "adjust-select-dgn-underlay")),
+        "*Invalid selection set. Select underlay objects of the same file type only.*" => Some(("insert", "adjust-mixed-underlays")),
+        "Enter image option [Contrast/Fade/Brightness] <Brightness>:" => Some(("insert", "adjust-image-option")),
+        "Enter %{kind} underlay option [Fade/Contrast/Monochrome] <%{option}>:" => Some(("insert", "adjust-underlay-option")),
+        "Monochrome? [Yes/No] <%{value}>:" => Some(("insert", "adjust-monochrome")),
+        "Enter brightness value (0-100) <%{value}>:" => Some(("insert", "adjust-brightness-value")),
+        "Enter contrast value (0-100) <%{value}>:" => Some(("insert", "adjust-contrast-value")),
+        "Enter fade value (0-100) <%{value}>:" => Some(("insert", "adjust-fade-value")),
+        "Value must be an integer between 0 and 100." => Some(("insert", "adjust-value-integer-0-100")),
         "Enter transparency mode [ON/OFF] <ON>:" => Some(("insert", "transparency-mode-on")),
         "Enter transparency mode [ON/OFF] <OFF>:" => Some(("insert", "transparency-mode-off")),
         "Attach..." => Some(("insert", "xref-attach-menu")),
@@ -4127,7 +4131,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "ISOPLANE: expected Left, Top, or Right." => Some(("common", "isoplane-expected-left-top-or-right")),
         "ISODRAFT: expected On or Off." => Some(("common", "isodraft-expected-on-or-off")),
         "XDATA: selected entities are on locked layers." => Some(("common", "xdata-selected-entities-are-on-locked-layers")),
-        "ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE)." => Some(("common", "adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade")),
         "ANNOAUTOSCALE: enter an integer from -4 through 4." => Some(("common", "annoautoscale-enter-an-integer-from-4-through-4")),
         "Usage: DATALINK <path-to-.csv>" => Some(("common", "usage-datalink-path-to-csv")),
         "DATALINKUPDATE: no linked tables found." => Some(("common", "datalinkupdate-no-linked-tables-found")),

src/modules/draw/select.rs

@@ -41,6 +41,9 @@ pub struct SelectObjectsCommand {
     /// The command works on associative dimensions only; the host drops
     /// everything else from each completed selection.
     associative_dimensions_only: bool,
+    /// The kinds of object the command takes; the host drops the rest of
+    /// each completed selection silently, and Enter on nothing ends quietly.
+    keep: Option<fn(&codec::EntityType) -> bool>,
 }
 
 impl SelectObjectsCommand {
@@ -57,6 +60,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -74,6 +78,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -91,6 +96,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -108,6 +114,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -131,6 +138,18 @@ impl SelectObjectsCommand {
         command
     }
 
+    /// The command's own wording, keeping only what `keep` accepts.
+    pub fn filtered(
+        prompt_cmd: &str,
+        pending_cmd: &str,
+        prompt_text: &'static str,
+        keep: fn(&codec::EntityType) -> bool,
+    ) -> Self {
+        let mut command = Self::with_prompt(prompt_cmd, pending_cmd, prompt_text);
+        command.keep = Some(keep);
+        command
+    }
+
     pub fn auto_constrain(pending_cmd: &str) -> Self {
         let mut command = Self::new(pending_cmd);
         command.auto_constrain_settings = true;
@@ -203,6 +222,10 @@ impl CadCommand for SelectObjectsCommand {
         self.associative_dimensions_only
     }
 
+    fn selection_entity_filter(&self) -> Option<fn(&codec::EntityType) -> bool> {
+        self.keep
+    }
+
     fn selection_drops_locked_point_clouds(&self) -> bool {
         matches!(
             self.pending_cmd.as_str(),
@@ -320,6 +343,9 @@ impl CadCommand for SelectObjectsCommand {
             }
             return CmdResult::NeedPoint;
         }
+        if self.keep.is_some() && self.handles.is_empty() {
+            return CmdResult::Relaunch(std::mem::take(&mut self.pending_cmd), Vec::new());
+        }
         if !self.commit_on_enter || self.handles.is_empty() {
             return CmdResult::Cancel;
         }

src/modules/insert/mod.rs

@@ -26,7 +26,7 @@ mod snap_underlays;
 pub(crate) mod solid3d_cmds;
 mod underlay_layers;
 pub(crate) mod wblock;
-mod xadjust;
+pub(crate) mod xadjust;
 pub(crate) mod xattach;
 pub(crate) mod xclip;
 pub(crate) mod xref_cmd;

src/modules/insert/xadjust.rs

@@ -1,4 +1,30 @@
+// ADJUST / -IMAGEADJUST / PDFADJUST / DWFADJUST / DGNADJUST — brightness,
+// contrast and fade of raster images; fade, contrast and monochrome of
+// PDF, DWF and DGN underlays.
+//
+//   Select image or underlay:
+//   Enter image option [Contrast/Fade/Brightness] <Brightness>:
+//   Enter brightness value (0-100) <50>:
+//
+//   Enter PDF underlay option [Fade/Contrast/Monochrome] <Fade>:
+//   Enter fade value (0-100) <25>:
+//   Monochrome? [Yes/No] <No>:
+//
+// An image value prompt offers the first image's own value. The underlay
+// option and the fade / contrast values offered are the last ones used in
+// the session, whatever the underlay kind. The host applies the value to
+// every chosen object as one undo step.
+
+use std::sync::Mutex;
+
+use codec::entities::{UnderlayDisplayFlags, UnderlayType};
+use codec::types::Handle;
+use codec::EntityType;
+
+use crate::command::{CadCommand, CmdOption, CmdResult, InputKind};
 use crate::modules::{IconKind, ModuleEvent, ToolDef};
+use crate::t;
+
 pub const ICON: IconKind = IconKind::Svg(include_bytes!("../../../assets/icons/xadjust.svg"));
 pub fn tool() -> ToolDef {
     ToolDef {
@@ -8,3 +34,330 @@ pub fn tool() -> ToolDef {
         event: ModuleEvent::Command("ADJUST".to_string()),
     }
 }
+
+/// What a command takes: `A` images or underlays, `I` images, `P` / `W` /
+/// `G` PDF / DWF / DGN underlays.
+pub fn keeps(mode: &str) -> fn(&EntityType) -> bool {
+    fn any(e: &EntityType) -> bool {
+        matches!(e, EntityType::RasterImage(_) | EntityType::Underlay(_))
+    }
+    fn image(e: &EntityType) -> bool {
+        matches!(e, EntityType::RasterImage(_))
+    }
+    fn pdf(e: &EntityType) -> bool {
+        matches!(e, EntityType::Underlay(u) if u.underlay_type == UnderlayType::Pdf)
+    }
+    fn dwf(e: &EntityType) -> bool {
+        matches!(e, EntityType::Underlay(u) if u.underlay_type == UnderlayType::Dwf)
+    }
+    fn dgn(e: &EntityType) -> bool {
+        matches!(e, EntityType::Underlay(u) if u.underlay_type == UnderlayType::Dgn)
+    }
+    match mode {
+        "I" => image,
+        "P" => pdf,
+        "W" => dwf,
+        "G" => dgn,
+        _ => any,
+    }
+}
+
+/// The command each mode belongs to.
+pub fn command_name(mode: &str) -> &'static str {
+    match mode {
+        "I" => "-IMAGEADJUST",
+        "P" => "PDFADJUST",
+        "W" => "DWFADJUST",
+        "G" => "DGNADJUST",
+        _ => "ADJUST",
+    }
+}
+
+/// The selection prompt of each command.
+pub fn select_prompt(mode: &str) -> &'static str {
+    match mode {
+        "I" => "Select image(s):",
+        "P" => "Select PDF underlay:",
+        "W" => "Select DWF underlay:",
+        "G" => "Select DGN underlay:",
+        _ => "Select image or underlay:",
+    }
+}
+
+#[derive(Clone, Copy, PartialEq)]
+enum Prop {
+    Brightness,
+    Contrast,
+    Fade,
+    Monochrome,
+}
+
+impl Prop {
+    fn label(self) -> &'static str {
+        match self {
+            Prop::Brightness => "Brightness",
+            Prop::Contrast => "Contrast",
+            Prop::Fade => "Fade",
+            Prop::Monochrome => "Monochrome",
+        }
+    }
+    fn key(self) -> &'static str {
+        match self {
+            Prop::Brightness => "BRIGHTNESS",
+            Prop::Contrast => "CONTRAST",
+            Prop::Fade => "FADE",
+            Prop::Monochrome => "MONOCHROME",
+        }
+    }
+}
+
+const IMAGE_OPTIONS: [Prop; 3] = [Prop::Contrast, Prop::Fade, Prop::Brightness];
+const UNDERLAY_OPTIONS: [Prop; 3] = [Prop::Fade, Prop::Contrast, Prop::Monochrome];
+
+/// The underlay option, fade and contrast last used in the session.
+static LAST_UNDERLAY: Mutex<(usize, u8, u8)> = Mutex::new((0, 25, 75));
+
+fn last_underlay() -> (usize, u8, u8) {
+    LAST_UNDERLAY.lock().map(|v| *v).unwrap_or((0, 25, 75))
+}
+
+enum Subject {
+    Image {
+        brightness: u8,
+        contrast: u8,
+        fade: u8,
+    },
+    Underlay {
+        kind: &'static str,
+        monochrome: bool,
+    },
+}
+
+pub struct AdjustCommand {
+    handles: Vec<Handle>,
+    subject: Subject,
+    prop: Option<Prop>,
+}
+
+/// Why a chosen set cannot be adjusted together.
+pub const MIXED: &str =
+    "*Invalid selection set. Select underlay objects of the same file type only.*";
+
+impl AdjustCommand {
+    /// The command for the chosen objects (the first one supplies the image
+    /// values and the monochrome state), or the reason they do not go
+    /// together. `None` when nothing adjustable was chosen.
+    pub fn for_objects(objects: &[(Handle, EntityType)]) -> Option<Result<Self, &'static str>> {
+        let (_, first) = objects.first()?;
+        let kind = |e: &EntityType| match e {
+            EntityType::Underlay(u) => Some(u.underlay_type),
+            _ => None,
+        };
+        if objects.iter().any(|(_, e)| kind(e) != kind(first)) {
+            return Some(Err(MIXED));
+        }
+        let subject = match first {
+            EntityType::RasterImage(img) => Subject::Image {
+                brightness: img.brightness,
+                contrast: img.contrast,
+                fade: img.fade,
+            },
+            EntityType::Underlay(u) => Subject::Underlay {
+                kind: match u.underlay_type {
+                    UnderlayType::Pdf => "PDF",
+                    UnderlayType::Dwf => "DWF",
+                    UnderlayType::Dgn => "DGN",
+                },
+                monochrome: u.flags.contains(UnderlayDisplayFlags::MONOCHROME),
+            },
+            _ => return None,
+        };
+        Some(Ok(Self {
+            handles: objects.iter().map(|(h, _)| *h).collect(),
+            subject,
+            prop: None,
+        }))
+    }
+
+    fn options_list(&self) -> &'static [Prop; 3] {
+        match self.subject {
+            Subject::Image { .. } => &IMAGE_OPTIONS,
+            Subject::Underlay { .. } => &UNDERLAY_OPTIONS,
+        }
+    }
+
+    fn default_option(&self) -> Prop {
+        match self.subject {
+            Subject::Image { .. } => Prop::Brightness,
+            Subject::Underlay { .. } => UNDERLAY_OPTIONS[last_underlay().0.min(2)],
+        }
+    }
+
+    fn default_value(&self, prop: Prop) -> u8 {
+        match (&self.subject, prop) {
+            (Subject::Image { brightness, .. }, Prop::Brightness) => *brightness,
+            (Subject::Image { contrast, .. }, Prop::Contrast) => *contrast,
+            (Subject::Image { fade, .. }, _) => *fade,
+            (Subject::Underlay { .. }, Prop::Contrast) => last_underlay().2,
+            (Subject::Underlay { .. }, _) => last_underlay().1,
+        }
+    }
+
+    fn apply(&self, prop: Prop, value: u8) -> CmdResult {
+        if let Subject::Underlay { .. } = self.subject {
+            if let Ok(mut last) = LAST_UNDERLAY.lock() {
+                last.0 = UNDERLAY_OPTIONS.iter().position(|p| *p == prop).unwrap_or(0);
+                match prop {
+                    Prop::Fade => last.1 = value,
+                    Prop::Contrast => last.2 = value,
+                    _ => {}
+                }
+            }
+        }
+        let handles: Vec<String> = self
+            .handles
+            .iter()
+            .map(|h| format!("{:X}", h.value()))
+            .collect();
+        CmdResult::Dispatch(format!(
+            "_ADJUSTAPPLY {} {} {}",
+            prop.key(),
+            value,
+            handles.join(" ")
+        ))
+    }
+}
+
+/// Whether `text` names `label` (its key letter or a longer prefix, in
+/// English or in the interface language).
+fn names(text: &str, label: &str) -> bool {
+    let english = label.to_uppercase();
+    let local = t!(label).to_uppercase();
+    !text.is_empty() && (english.starts_with(text) || local.starts_with(text))
+}
+
+impl CadCommand for AdjustCommand {
+    fn name(&self) -> &'static str {
+        "ADJUST"
+    }
+
+    fn prompt(&self) -> String {
+        match (self.prop, &self.subject) {
+            (None, Subject::Image { .. }) => {
+                t!("Enter image option [Contrast/Fade/Brightness] <Brightness>:").into_owned()
+            }
+            (None, Subject::Underlay { kind, .. }) => t!(
+                "Enter %{kind} underlay option [Fade/Contrast/Monochrome] <%{option}>:",
+                kind = kind,
+                option = t!(self.default_option().label())
+            )
+            .into_owned(),
+            (Some(Prop::Monochrome), Subject::Underlay { monochrome, .. }) => t!(
+                "Monochrome? [Yes/No] <%{value}>:",
+                value = if *monochrome { t!("Yes") } else { t!("No") }
+            )
+            .into_owned(),
+            (Some(Prop::Brightness), _) => t!(
+                "Enter brightness value (0-100) <%{value}>:",
+                value = self.default_value(Prop::Brightness)
+            )
+            .into_owned(),
+            (Some(Prop::Contrast), _) => t!(
+                "Enter contrast value (0-100) <%{value}>:",
+                value = self.default_value(Prop::Contrast)
+            )
+            .into_owned(),
+            (Some(_), _) => t!(
+                "Enter fade value (0-100) <%{value}>:",
+                value = self.default_value(Prop::Fade)
+            )
+            .into_owned(),
+        }
+    }
+
+    fn options(&self) -> Vec<CmdOption> {
+        match self.prop {
+            None => self
+                .options_list()
+                .iter()
+                .map(|p| CmdOption::new(p.label(), &p.label()[..1]))
+                .collect(),
+            Some(Prop::Monochrome) => vec![CmdOption::new("Yes", "Y"), CmdOption::new("No", "N")],
+            Some(_) => Vec::new(),
+        }
+    }
+
+    fn input_kind(&self) -> InputKind {
+        InputKind::SingleToken
+    }
+
+    fn on_text_input(&mut self, text: &str) -> Option<CmdResult> {
+        let text = text.trim().to_uppercase();
+        let invalid = || {
+            Some(CmdResult::ReportError(
+                t!("Invalid option keyword.").into_owned(),
+            ))
+        };
+        match self.prop {
+            None => {
+                let chosen = if text.is_empty() {
+                    Some(self.default_option())
+                } else {
+                    self.options_list()
+                        .iter()
+                        .copied()
+                        .find(|p| names(&text, p.label()))
+                };
+                let Some(prop) = chosen else {
+                    return invalid();
+                };
+                self.prop = Some(prop);
+                Some(CmdResult::NeedPoint)
+            }
+            Some(Prop::Monochrome) => {
+                let Subject::Underlay { monochrome, .. } = self.subject else {
+                    return Some(CmdResult::Cancel);
+                };
+                let on = if text.is_empty() {
+                    monochrome
+                } else if names(&text, "Yes") {
+                    true
+                } else if names(&text, "No") {
+                    false
+                } else {
+                    return invalid();
+                };
+                Some(self.apply(Prop::Monochrome, on as u8))
+            }
+            Some(prop) => {
+                let value = if text.is_empty() {
+                    Some(self.default_value(prop))
+                } else {
+                    text.parse::<u8>().ok().filter(|v| *v <= 100)
+                };
+                match (value, &self.subject) {
+                    (Some(v), _) => Some(self.apply(prop, v)),
+                    (None, Subject::Image { .. }) => Some(CmdResult::ReportError(
+                        t!("Value must be an integer between 0 and 100.").into_owned(),
+                    )),
+                    (None, Subject::Underlay { .. }) => Some(CmdResult::ReportError(
+                        crate::tf!("Requires an integer between {min} and {max}.", min = 0, max = 100)
+                            .into_owned(),
+                    )),
+                }
+            }
+        }
+    }
+
+    fn on_point(&mut self, _pt: glam::DVec3) -> CmdResult {
+        CmdResult::NeedPoint
+    }
+
+    fn on_enter(&mut self) -> CmdResult {
+        self.on_text_input("").unwrap_or(CmdResult::Cancel)
+    }
+}
+
+inventory::submit!(crate::command::CommandRegistration {
+    names: &["-IMAGEADJUST", "PDFADJUST", "DWFADJUST", "DGNADJUST"]
+});