DCRADIUS: reference radial dimensional constraint with a dynamic radial dimension

Select arc or circle / Dimension text / dimension line location / value or
name prompts with a radN parameter, invalid-selection, miss, duplicate and
invalid-expression messages, negative values as magnitudes, a dynamic radial
dimension on the constraints layer drawn as the reference does (mid-radius
text on the center-to-rim line, no hook, no center mark, one text grip), the
stored text position following the radius, center-anchored resizing, the
Properties title and Constraint section, DIMCONSTRAINT's Radius default,
the small-button Dimensional ribbon grid and tooltip descriptions.

Co-Authored-By: Claude Fable 5.1 <[email protected]>

src/app/command_driver.rs

@@ -4442,6 +4442,172 @@ impl OpenCADStudio {
                     self.commit_undo_delta(i, pd);
                 }
             }
+            CmdResult::AddRadialConstraint {
+                circle,
+                location,
+                name,
+                expression,
+                renamed,
+            } => {
+                use crate::scene::named_parameters::{is_valid_name, DrivingValue};
+                use crate::scene::parametric_constraints::{dynamic_dimension_text, ConstraintKind};
+
+                let scope = self.tabs[i].current_parametric_scope();
+                let kind = ConstraintKind::Radius;
+                let refs = vec![circle];
+                // A second radius on the same circle is refused after the
+                // value, and the command ends.
+                let duplicate = self.tabs[i]
+                    .scene
+                    .parametric_constraint_set(scope)
+                    .is_some_and(|set| {
+                        set.constraints
+                            .iter()
+                            .any(|c| c.enabled && c.kind == kind && c.refs == refs)
+                    });
+                if duplicate {
+                    self.command_line
+                        .push_output("The constraint already exists on the selected objects.");
+                    self.tabs[i].active_cmd = None;
+                    self.tabs[i].snap_result = None;
+                    return Task::none();
+                }
+                if let Err(message) = self.tabs[i].scene.validate_parametric_constraint(
+                    kind,
+                    &refs,
+                    Some(&DrivingValue::Literal(1.0)),
+                ) {
+                    self.reprompt_active_command(i, message);
+                    return Task::none();
+                }
+                let name = name.trim().to_string();
+                if !is_valid_name(&name) {
+                    self.command_line.push_error(
+                        "Only alphanumeric names, starting with alpha characters, are allowed.",
+                    );
+                    self.reprompt_active_command(i, &format!("Invalid parameter name: {name}."));
+                    return Task::none();
+                }
+                if renamed && self.tabs[i].scene.named_parameters().contains(&name) {
+                    self.reprompt_active_command(i, "Parameter with this name already exists.");
+                    return Task::none();
+                }
+                let mut table = self.tabs[i].scene.named_parameters().clone();
+                if let Err(error) = table.set(&name, &expression) {
+                    self.reprompt_active_command(i, &error.to_string());
+                    return Task::none();
+                }
+                // A negative radius is its magnitude (`rad1=-20` is a radius
+                // of 20); a zero radius has no circle.
+                let value = match table.resolve(&name) {
+                    Ok(value) if value.is_finite() && value != 0.0 => value,
+                    _ => {
+                        self.command_line.push_error("Invalid expression.");
+                        self.reprompt_active_command(
+                            i,
+                            "The parameter is used in an expression which results in an invalid value for a dimensional constraint.",
+                        );
+                        return Task::none();
+                    }
+                };
+                let annotational = self.constraint_form_annotational;
+                let text = dynamic_dimension_text(
+                    &name,
+                    value,
+                    self.tabs[i].scene.constraint_name_format,
+                    false,
+                    Some(&expression),
+                    annotational,
+                    None,
+                );
+                let source = self.tabs[i]
+                    .scene
+                    .document
+                    .get_entity(circle.entity)
+                    .and_then(|entity| {
+                        crate::scene::dimension_assoc::radial_source_at(
+                            entity,
+                            acadrust::types::Vector3::new(location.x, location.y, location.z),
+                        )
+                    });
+                let Some(source) = source else {
+                    self.reprompt_active_command(
+                        i,
+                        crate::modules::parametric::DimConstraintCommand::NO_OBJECT,
+                    );
+                    return Task::none();
+                };
+                let mut entity = crate::modules::annotate::radius_dim::radial_dimension_entity(
+                    source,
+                    location,
+                    Some(text),
+                    None,
+                );
+                crate::scene::creation_style::apply_current_creation_styles(
+                    &self.tabs[i].scene.document,
+                    &mut entity,
+                );
+                if annotational {
+                    entity
+                        .as_entity_mut()
+                        .set_layer(self.tabs[i].active_layer.clone());
+                } else {
+                    self.tabs[i].scene.ensure_dynamic_dimension_layer();
+                    entity.as_entity_mut().set_layer(
+                        crate::scene::parametric_constraints::DYNAMIC_DIMENSION_LAYER.to_string(),
+                    );
+                    entity.common_mut().color = acadrust::types::Color::Rgb {
+                        r: 103,
+                        g: 109,
+                        b: 118,
+                    };
+                }
+                let constraints_before = self.tabs[i]
+                    .scene
+                    .parametric_constraint_set(scope)
+                    .cloned()
+                    .unwrap_or_else(|| {
+                        crate::scene::parametric_constraints::ParametricConstraintSet::new(scope)
+                    });
+                // The center stays; a value other than the measured radius
+                // resizes the circle about it.
+                let anchors = crate::scene::parametric_constraints::dimensional_anchor_refs(
+                    &self.tabs[i].scene.document,
+                    &refs,
+                );
+                let pending = self.begin_undo(i, "Radius constraint", 2, false);
+                self.tabs[i]
+                    .scene
+                    .record_undo_parametric_constraints_before(scope, constraints_before);
+                self.tabs[i].scene.record_undo_named_parameters_before();
+                self.tabs[i].scene.named_parameters = table;
+                let dimension = self.tabs[i].scene.add_entity(entity);
+                let set = self.tabs[i].scene.parametric_constraint_set_mut(scope);
+                let id = set.add(kind, refs, Some(DrivingValue::Named(name)));
+                set.dimensions.insert(id, dimension);
+                self.tabs[i].scene.note_parametric_constraint_applied(
+                    scope,
+                    id,
+                    self.constraint_bar_display,
+                );
+                self.tabs[i]
+                    .scene
+                    .attach_dimension_association(dimension, vec![Some(circle.entity)]);
+                self.tabs[i].scene.bump_entities_with_parametric_policy(
+                    &[(circle.entity, crate::scene::ChangeKind::Modified)],
+                    &anchors,
+                    false,
+                );
+                self.tabs[i].scene.refresh_hidden_dynamic_dimensions();
+                self.tabs[i].scene.refresh_dynamic_dimension_scales(true);
+                self.tabs[i].dirty = true;
+                self.tabs[i].active_cmd = None;
+                self.tabs[i].snap_result = None;
+                self.refresh_properties();
+                if let Some(pd) = pending {
+                    self.commit_undo_delta(i, pd);
+                }
+            }
             CmdResult::MakeParallel {
                 first_line,
                 first_ends,
@@ -5886,6 +6052,16 @@ impl OpenCADStudio {
             CmdResult::Dispatch(cmd) => {
                 // End this interactive front-end, then run the assembled command
                 // through the normal dispatcher. Selection is left untouched.
+                // DIMCONSTRAINT's Radius option becomes its next default; the
+                // DCRADIUS command run on its own leaves the default alone.
+                if cmd == "DCRADIUS"
+                    && self.tabs[i]
+                        .active_cmd
+                        .as_ref()
+                        .is_some_and(|command| command.name() == "DIMCONSTRAINT")
+                {
+                    self.dim_constraint_last = "Radius";
+                }
                 self.tabs[i].active_cmd = None;
                 self.tabs[i].snap_result = None;
                 self.tabs[i].scene.clear_preview_wire();

src/app/commands/draw.rs

@@ -1891,10 +1891,20 @@ impl OpenCADStudio {
                 self.tabs[i].active_cmd = Some(Box::new(command));
             }
 
-            "DCONSTRAINT" | "DCRADIUS" | "DCDIAMETER" => {
-                if cmd == "DCRADIUS" {
-                    self.dim_constraint_last = "Radius";
-                } else if cmd == "DCDIAMETER" {
+            "DCRADIUS" => {
+                use crate::modules::parametric::{DimConstraintAxis, DimConstraintCommand};
+                use crate::scene::parametric_constraints::next_radial_parameter_name;
+                // Run on its own it leaves DIMCONSTRAINT's default alone.
+                let name = next_radial_parameter_name(self.tabs[i].scene.named_parameters());
+                // The circle or arc is picked inside the command.
+                self.tabs[i].scene.deselect_all();
+                let command = DimConstraintCommand::new(DimConstraintAxis::Radius, name);
+                self.command_line.push_info(&command.prompt());
+                self.tabs[i].active_cmd = Some(Box::new(command));
+            }
+
+            "DCONSTRAINT" | "DCDIAMETER" => {
+                if cmd == "DCDIAMETER" {
                     self.dim_constraint_last = "Diameter";
                 }
                 let handles = self.tabs[i].scene.selected_handles_in_order();

src/app/properties.rs

@@ -2368,6 +2368,9 @@ impl OpenCADStudio {
                                     acadrust::EntityType::Dimension(
                                         Dimension::Angular2Ln(_) | Dimension::Angular3Pt(_),
                                     ) => t!("Angular Dimensional Constraint"),
+                                    acadrust::EntityType::Dimension(Dimension::Radius(_)) => {
+                                        t!("Radial Dimension (Dynamic)")
+                                    }
                                     _ => t!("Linear Dimensional Constraint"),
                                 }
                                 .into_owned()
@@ -2850,6 +2853,13 @@ handles={handles_ms:.1} panel={:.1} ribbon={ribbon_ms:.1} tail={:.1} selected={}
                             );
                         }
                     }
+                } else if matches!(
+                    contextual.as_ref(),
+                    acadrust::EntityType::Dimension(acadrust::entities::Dimension::Radius(_))
+                ) && self.tabs[i].scene.is_dynamic_dimension(handle)
+                {
+                    // A dynamic radius shows only its text square.
+                    entity_grips.retain(|grip| grip.id == 2);
                 } else if self.tabs[i].scene.is_dynamic_dimension(handle) {
                     // A dynamic dimension shows the reference's grips: a
                     // triangle at each constraint point aimed at the other

src/command.rs

@@ -1650,6 +1650,15 @@ pub enum CmdResult {
         expression: String,
         renamed: bool,
     },
+    /// Adds a radius constraint on a circle or arc with its dynamic radial
+    /// dimension (text at `location`) and the `radN` parameter that drives it.
+    AddRadialConstraint {
+        circle: crate::scene::parametric_constraints::ParametricRef,
+        location: DVec3,
+        name: String,
+        expression: String,
+        renamed: bool,
+    },
     /// Aligned's 2Lines: makes `second_line` parallel to `first_line` (whose
     /// ends stay put), then hands the second line's solved ends back through
     /// `CadCommand::accept_parallel_line`.

src/entities/dimension.rs

@@ -1134,7 +1134,11 @@ impl Grippable for Dimension {
         // of the world origin, so it stays on the visible text and grabbable.
         let text = {
             let p = self.base().text_middle_point;
-            if p.x * p.x + p.y * p.y + p.z * p.z > 1e-16 {
+            // A dynamic radius constraint draws its text at mid-radius, not
+            // at the stored point; its grip sits on the drawn text.
+            let drawn_elsewhere =
+                matches!(self, Dimension::Radius(_)) && dynamic_constraint_dimension(self);
+            if p.x * p.x + p.y * p.y + p.z * p.z > 1e-16 && !drawn_elsewhere {
                 dv3(&p)
             } else {
                 dv3(&dimension_text_pos_f64(self, None, 2.5, 1.0))
@@ -4780,7 +4784,12 @@ fn dimension_geometry(
             // to the centre. Text outside: only a leader from the arc point to
             // the text, unless DIMTOFL asks for the inside line as well.
             if !jogged && !suppress.dim2 && (!text_is_outside || params.dimtofl) {
-                add_segment(&mut g.dim_lines, center, point);
+                if dynamic_constraint_dimension(dim) {
+                    // The line passes behind the mid-radius text.
+                    add_segment_with_text_break(&mut g.dim_lines, center, point, params.text_break);
+                } else {
+                    add_segment(&mut g.dim_lines, center, point);
+                }
             }
             if text_is_outside && !suppress.dim2 {
                 append_radial_leader(&mut g, point, text, &params);
@@ -7542,6 +7551,15 @@ fn stored_text_point(dim: &Dimension) -> Option<Vector3> {
     (p.x * p.x + p.y * p.y + p.z * p.z > 1e-16).then_some(p)
 }
 
+/// A dimensional constraint's dynamic dimension: the reference keeps it on
+/// its own hidden layer and draws it by its own rules.
+fn dynamic_constraint_dimension(dim: &Dimension) -> bool {
+    dim.base()
+        .common
+        .layer
+        .eq_ignore_ascii_case(crate::scene::parametric_constraints::DYNAMIC_DIMENSION_LAYER)
+}
+
 /// The point on the circle a radial leader leaves from: the arc point of a
 /// radius, or whichever end of a diameter's chord is nearer the text.
 fn radial_leader_tip(dim: &Dimension, text: Vector3) -> Vector3 {
@@ -7598,6 +7616,12 @@ fn dimension_text_pos_f64(
 
     if let Some(point) = stored_text_point(dim) {
         return match dim {
+            // A dynamic radius constraint draws its text at mid-radius on the
+            // dimension line, whatever text position the file stores (the
+            // picked location), as the reference does.
+            Dimension::Radius(d) if dynamic_constraint_dimension(dim) => {
+                (d.angle_vertex + d.definition_point) * 0.5
+            }
             // DIMTMOVE 1 stores where the leader's hook starts: one arrow of
             // hook, a gap, then the text, all running away from the arc.
             // Measured on 39 such dimensions the stored point sits 2.4 text

src/modules/annotate/radius_dim.rs

@@ -62,32 +62,40 @@ impl RadiusDimensionCommand {
         source: crate::scene::dimension_assoc::RadialSourceGeometry,
         world: DVec3,
     ) -> EntityType {
-        let plane = WorkingPlane::new(
-            DVec3::from_array(source.plane.origin),
-            DVec3::from_array(source.plane.x_axis),
-            DVec3::from_array(source.plane.y_axis),
-        );
-        let center = plane.to_local(dvec(source.center_world()));
-        let chord = plane.to_local(dvec(source.chord_at(world.to_array())));
-        let point = plane.to_local(world);
-        let mut dim = DimensionRadius::new(v3(center), v3(chord));
-        dim.base.definition_point = v3(chord);
-        dim.base.text_middle_point = v3(point);
-        dim.base.insertion_point = v3(point);
-        dim.base.text_user_positioned = true;
-        dim.leader_length = chord.distance(point);
-        dim.base.actual_measurement = dim.measurement();
-        crate::entities::dimension::set_dimension_text_override(
-            &mut dim.base,
-            self.text_override.clone(),
-        );
-        if let Some(angle) = self.text_angle {
-            dim.base.text_rotation = angle;
-        }
-        plane.place_entity(EntityType::Dimension(Dimension::Radius(dim)))
+        radial_dimension_entity(source, world, self.text_override.clone(), self.text_angle)
     }
 }
 
+/// A radius dimension of `source` with its text at `world`: the dimension
+/// line runs from the center through the text (DIMUPT).
+pub(crate) fn radial_dimension_entity(
+    source: crate::scene::dimension_assoc::RadialSourceGeometry,
+    world: DVec3,
+    text_override: Option<String>,
+    text_angle: Option<f64>,
+) -> EntityType {
+    let plane = WorkingPlane::new(
+        DVec3::from_array(source.plane.origin),
+        DVec3::from_array(source.plane.x_axis),
+        DVec3::from_array(source.plane.y_axis),
+    );
+    let center = plane.to_local(dvec(source.center_world()));
+    let chord = plane.to_local(dvec(source.chord_at(world.to_array())));
+    let point = plane.to_local(world);
+    let mut dim = DimensionRadius::new(v3(center), v3(chord));
+    dim.base.definition_point = v3(chord);
+    dim.base.text_middle_point = v3(point);
+    dim.base.insertion_point = v3(point);
+    dim.base.text_user_positioned = true;
+    dim.leader_length = chord.distance(point);
+    dim.base.actual_measurement = dim.measurement();
+    crate::entities::dimension::set_dimension_text_override(&mut dim.base, text_override);
+    if let Some(angle) = text_angle {
+        dim.base.text_rotation = angle;
+    }
+    plane.place_entity(EntityType::Dimension(Dimension::Radius(dim)))
+}
+
 impl CadCommand for RadiusDimensionCommand {
     fn set_working_plane(&mut self, _plane: WorkingPlane) {
     }

src/modules/parametric/dim_constraint.rs

@@ -16,6 +16,8 @@ pub enum DimConstraintAxis {
     Aligned,
     /// The angle between two lines, or at a vertex between two points.
     Angular,
+    /// The radius of a circle or arc.
+    Radius,
 }
 
 /// A picked line (a line entity or one polyline segment) an Aligned
@@ -106,6 +108,16 @@ enum Step {
         sector: u8,
         measured: f64,
     },
+    /// Radius: `Select arc or circle:`
+    RadialSelect,
+    /// `Specify dimension line location:` of a radius.
+    RadialLocation { circle: ParametricRef, radius: f64 },
+    /// `Enter value or name and value <rad1=30>:`
+    RadialValue {
+        circle: ParametricRef,
+        radius: f64,
+        location: DVec3,
+    },
     /// `Enter value or name and value <d1=100>:`
     Value {
         first: ParametricRef,
@@ -155,14 +167,16 @@ impl DimConstraintCommand {
         "The object or point is already selected.  Select a different object or constraint point.";
     pub const INVALID_LINE: &'static str = "Invalid selection for Aligned. Select a line segment, polyline segment, text, MText, major or minor axis of ellipse or elliptical arc.";
     pub const PARALLEL_LINES: &'static str = "Lines are parallel.";
+    pub const INVALID_RADIAL: &'static str =
+        "Invalid selection for Radial. Select a circle or arc.";
 
     pub fn new(axis: DimConstraintAxis, default_name: String) -> Self {
         Self {
             axis,
-            step: if axis == DimConstraintAxis::Angular {
-                Step::AngularFirst
-            } else {
-                Step::First
+            step: match axis {
+                DimConstraintAxis::Angular => Step::AngularFirst,
+                DimConstraintAxis::Radius => Step::RadialSelect,
+                _ => Step::First,
             },
             picked_entity: None,
             default_name,
@@ -304,6 +318,25 @@ impl DimConstraintCommand {
         })
     }
 
+    fn build_radial(&self, name: String, expression: String) -> Option<CmdResult> {
+        let Step::RadialValue {
+            circle, location, ..
+        } = self.step
+        else {
+            return None;
+        };
+        if expression.trim().is_empty() {
+            return None;
+        }
+        Some(CmdResult::AddRadialConstraint {
+            circle,
+            location,
+            renamed: name != self.default_name,
+            name,
+            expression,
+        })
+    }
+
     fn command_name(&self) -> &'static str {
         match self.axis {
             DimConstraintAxis::Linear => "DCLINEAR",
@@ -311,6 +344,7 @@ impl DimConstraintCommand {
             DimConstraintAxis::Vertical => "DCVERTICAL",
             DimConstraintAxis::Aligned => "DCALIGNED",
             DimConstraintAxis::Angular => "DCANGULAR",
+            DimConstraintAxis::Radius => "DCRADIUS",
         }
     }
 
@@ -321,6 +355,7 @@ impl DimConstraintCommand {
             DimConstraintAxis::Vertical => "Vertical",
             DimConstraintAxis::Aligned => "Aligned",
             DimConstraintAxis::Angular => "Angular",
+            DimConstraintAxis::Radius => "Radial",
         }
     }
 
@@ -474,8 +509,8 @@ impl DimConstraintCommand {
             }
             DimConstraintAxis::Horizontal => (ConstraintKind::DistanceX, DVec3::X),
             DimConstraintAxis::Vertical => (ConstraintKind::DistanceY, DVec3::Y),
-            // Angular never measures here; its own steps decide the sector.
-            DimConstraintAxis::Aligned | DimConstraintAxis::Angular => (
+            // Angular and Radius never measure here; their own steps decide.
+            DimConstraintAxis::Aligned | DimConstraintAxis::Angular | DimConstraintAxis::Radius => (
                 ConstraintKind::Distance,
                 (second - first).normalize_or(DVec3::X),
             ),
@@ -525,7 +560,9 @@ impl DimConstraintCommand {
                 DimConstraintAxis::Linear => "Linear constraint",
                 DimConstraintAxis::Horizontal => "Horizontal distance constraint",
                 DimConstraintAxis::Vertical => "Vertical distance constraint",
-                DimConstraintAxis::Aligned | DimConstraintAxis::Angular => "Aligned constraint",
+                DimConstraintAxis::Aligned | DimConstraintAxis::Angular | DimConstraintAxis::Radius => {
+                    "Aligned constraint"
+                }
             },
         })
     }
@@ -567,14 +604,17 @@ impl CadCommand for DimConstraintCommand {
             Step::AngularPoint2 { .. } => {
                 format!("{name}  Specify second angle constraint point:")
             }
-            Step::AngularLocation { .. } | Step::Location { .. } => {
+            Step::RadialSelect => format!("{name}  Select arc or circle:"),
+            Step::AngularLocation { .. } | Step::Location { .. } | Step::RadialLocation { .. } => {
                 format!("{name}  Specify dimension line location:")
             }
-            Step::AngularValue { measured, .. } => format!(
-                "{name}  Enter value or name and value <{}={}>:",
-                self.default_name,
-                measured_expression(measured)
-            ),
+            Step::AngularValue { measured, .. } | Step::RadialValue { radius: measured, .. } => {
+                format!(
+                    "{name}  Enter value or name and value <{}={}>:",
+                    self.default_name,
+                    measured_expression(measured)
+                )
+            }
             Step::Value { measured, .. } => format!(
                 "{name}  Enter value or name and value <{}={}>:",
                 self.default_name,
@@ -609,6 +649,7 @@ impl CadCommand for DimConstraintCommand {
                 | Step::Value { .. }
                 | Step::AngularFirst
                 | Step::AngularValue { .. }
+                | Step::RadialValue { .. }
         )
     }
 
@@ -643,16 +684,16 @@ impl CadCommand for DimConstraintCommand {
                 }
                 None
             }
-            Step::Value { .. } | Step::AngularValue { .. } => {
+            Step::Value { .. } | Step::AngularValue { .. } | Step::RadialValue { .. } => {
                 let text = text.trim();
                 let (name, expression) = match text.split_once('=') {
                     Some((name, expression)) => (name.trim().to_string(), expression.trim().to_string()),
                     None => (self.default_name.clone(), text.to_string()),
                 };
-                if matches!(self.step, Step::AngularValue { .. }) {
-                    self.build_angular(name, expression)
-                } else {
-                    self.build(name, expression)
+                match self.step {
+                    Step::AngularValue { .. } => self.build_angular(name, expression),
+                    Step::RadialValue { .. } => self.build_radial(name, expression),
+                    _ => self.build(name, expression),
                 }
             }
             _ => None,
@@ -676,6 +717,7 @@ impl CadCommand for DimConstraintCommand {
                 | Step::AngularVertex
                 | Step::AngularPoint1 { .. }
                 | Step::AngularPoint2 { .. }
+                | Step::RadialSelect
         )
     }
 
@@ -867,10 +909,35 @@ impl CadCommand for DimConstraintCommand {
                     whole_curve: false,
                 })
             }
+            Step::RadialSelect => {
+                if handle.is_null() {
+                    return Self::report(Self::NO_OBJECT);
+                }
+                let Some(entity) = self.picked_entity.take() else {
+                    return CmdResult::NeedPoint;
+                };
+                let radius = match &entity {
+                    EntityType::Circle(circle) => circle.radius,
+                    EntityType::Arc(arc) => arc.radius,
+                    _ => return Self::report(Self::INVALID_RADIAL),
+                };
+                self.step = Step::RadialLocation {
+                    circle: ParametricRef::whole(handle),
+                    radius,
+                };
+                // The reference reports the radius before asking where the
+                // dimension goes.
+                CmdResult::ReportMeasurement(format!(
+                    "Dimension text = {}",
+                    measured_expression(radius)
+                ))
+            }
             Step::Location { .. }
             | Step::Value { .. }
             | Step::AngularLocation { .. }
-            | Step::AngularValue { .. } => self.on_point(point),
+            | Step::AngularValue { .. }
+            | Step::RadialLocation { .. }
+            | Step::RadialValue { .. } => self.on_point(point),
         }
     }
 
@@ -998,7 +1065,16 @@ impl CadCommand for DimConstraintCommand {
             | Step::TwoLinesFirst
             | Step::TwoLinesSecond { .. }
             | Step::AngularFirst
-            | Step::AngularSecond { .. } => Self::report(Self::NO_OBJECT),
+            | Step::AngularSecond { .. }
+            | Step::RadialSelect => Self::report(Self::NO_OBJECT),
+            Step::RadialLocation { circle, radius } => {
+                self.step = Step::RadialValue {
+                    circle,
+                    radius,
+                    location: point,
+                };
+                CmdResult::NeedPoint
+            }
             Step::AngularLocation { data } => {
                 let frame = match data {
                     AngularData::Lines { first, second } => Self::angle_frame(
@@ -1050,9 +1126,10 @@ impl CadCommand for DimConstraintCommand {
                 };
                 CmdResult::ReportMeasurement(format!("Dimension text = {measured:.4}"))
             }
-            Step::TwoLinesParallel { .. } | Step::Value { .. } | Step::AngularValue { .. } => {
-                CmdResult::NeedPoint
-            }
+            Step::TwoLinesParallel { .. }
+            | Step::Value { .. }
+            | Step::AngularValue { .. }
+            | Step::RadialValue { .. } => CmdResult::NeedPoint,
         }
     }
 
@@ -1070,6 +1147,9 @@ impl CadCommand for DimConstraintCommand {
             Step::AngularValue { measured, .. } => self
                 .build_angular(self.default_name.clone(), measured_expression(measured))
                 .unwrap_or(CmdResult::Cancel),
+            Step::RadialValue { radius, .. } => self
+                .build_radial(self.default_name.clone(), measured_expression(radius))
+                .unwrap_or(CmdResult::Cancel),
             Step::PointLinePoint => {
                 self.step = Step::LineFirst;
                 CmdResult::NeedPoint

src/modules/parametric/mod.rs

@@ -123,10 +123,14 @@ impl CadModule for ParametricModule {
                             default: "DCLINEAR",
                         },
                         RibbonItem::LargeTool(dimensional_tools::aligned()),
-                        RibbonItem::LargeTool(dimensional_tools::radius()),
-                        RibbonItem::LargeTool(dimensional_tools::diameter()),
-                        RibbonItem::LargeTool(dimensional_tools::angular()),
-                        RibbonItem::LargeTool(dimensional_tools::convert()),
+                        // Two rows of small icon-only buttons, as in the
+                        // reference: Radius, Diameter / Angular, Convert.
+                        RibbonItem::ToolGrid {
+                            columns: vec![
+                                vec![dimensional_tools::radius(), dimensional_tools::angular()],
+                                vec![dimensional_tools::diameter(), dimensional_tools::convert()],
+                            ],
+                        },
                         RibbonItem::LabeledDropdown {
                             id: "DCVISIBILITY", label: "Show/Hide",
                             icon: IconKind::Svg(include_bytes!("../../../assets/icons/constrain/show.svg")),
@@ -200,10 +204,17 @@ mod tests {
         );
         assert_eq!(
             groups[1].tools.iter().map(item_id).collect::<Vec<_>>(),
-            [
-                "DC_LINEAR_MENU", "DCALIGNED", "DCRADIUS", "DCDIAMETER",
-                "DCANGULAR", "DCCONVERT", "DCVISIBILITY", "DCSHOWALL", "DCHIDEALL",
-            ]
+            ["DC_LINEAR_MENU", "DCALIGNED", "GRID", "DCVISIBILITY", "DCSHOWALL", "DCHIDEALL"]
+        );
+        let RibbonItem::ToolGrid { columns } = &groups[1].tools[2] else {
+            panic!("radius, diameter, angular and convert must be a small-button grid");
+        };
+        assert_eq!(
+            columns
+                .iter()
+                .map(|column| column.iter().map(|tool| tool.id).collect::<Vec<_>>())
+                .collect::<Vec<_>>(),
+            [["DCRADIUS", "DCANGULAR"], ["DCDIAMETER", "DCCONVERT"]]
         );
         assert_eq!(groups[2].tools.iter().map(item_id).collect::<Vec<_>>(), ["DELCONSTRAINT", "PARAMETERS"]);
 
@@ -218,8 +229,6 @@ mod tests {
         assert!(groups[0].tools[1..13]
             .iter()
             .all(|item| matches!(item, RibbonItem::LargeTool(_))));
-        assert!(groups[1].tools[2..6]
-            .iter()
-            .all(|item| matches!(item, RibbonItem::LargeTool(_))));
+        assert!(matches!(groups[1].tools[1], RibbonItem::LargeTool(_)));
     }
 }

src/scene/parametric_constraints.rs

@@ -353,24 +353,36 @@ pub(crate) fn equal_size_follower(
     Some(entity)
 }
 
+/// The first free `<prefix>1`, `<prefix>2`, … name a new constraint takes.
+fn next_prefixed_parameter_name(
+    table: &super::named_parameters::ParameterTable,
+    prefix: &str,
+) -> String {
+    (1..)
+        .map(|n| format!("{prefix}{n}"))
+        .find(|name| !table.contains(name))
+        .unwrap_or_else(|| format!("{prefix}1"))
+}
+
 /// The first free `d1`, `d2`, … name a new dimensional constraint takes.
 pub(crate) fn next_dimensional_parameter_name(
     table: &super::named_parameters::ParameterTable,
 ) -> String {
-    (1..)
-        .map(|n| format!("d{n}"))
-        .find(|name| !table.contains(name))
-        .unwrap_or_else(|| "d1".to_string())
+    next_prefixed_parameter_name(table, "d")
 }
 
 /// The first free `ang1`, `ang2`, … name a new angular constraint takes.
 pub(crate) fn next_angular_parameter_name(
     table: &super::named_parameters::ParameterTable,
 ) -> String {
-    (1..)
-        .map(|n| format!("ang{n}"))
-        .find(|name| !table.contains(name))
-        .unwrap_or_else(|| "ang1".to_string())
+    next_prefixed_parameter_name(table, "ang")
+}
+
+/// The first free `rad1`, `rad2`, … name a new radius constraint takes.
+pub(crate) fn next_radial_parameter_name(
+    table: &super::named_parameters::ParameterTable,
+) -> String {
+    next_prefixed_parameter_name(table, "rad")
 }
 
 /// An angle as the reference displays it: a negative or over-full value is
@@ -565,6 +577,52 @@ fn dynamic_dimension_follow_points(
     true
 }
 
+/// A circle's or arc's center and radius.
+fn radial_geometry(entity: &acadrust::EntityType) -> Option<(Vector3, f64)> {
+    match entity {
+        acadrust::EntityType::Circle(circle) => Some((circle.center_wcs(), circle.radius)),
+        acadrust::EntityType::Arc(arc) => Some((arc.center_wcs(), arc.radius)),
+        _ => None,
+    }
+}
+
+/// Moves a dynamic radial dimension onto its circle's current center and
+/// radius: the dimension line keeps its direction and the text keeps its
+/// distance beyond the circle, as in the reference; true when it moved.
+fn dynamic_dimension_follow_radius(
+    dimension: &mut acadrust::entities::Dimension,
+    center: Vector3,
+    radius: f64,
+) -> bool {
+    let acadrust::entities::Dimension::Radius(radial) = dimension else {
+        return false;
+    };
+    let to_dvec = |p: Vector3| glam::DVec3::new(p.x, p.y, p.z);
+    let to_vec = |p: glam::DVec3| Vector3::new(p.x, p.y, p.z);
+    let old_center = to_dvec(radial.angle_vertex);
+    let old_radius = (to_dvec(radial.definition_point) - old_center).length();
+    let center = to_dvec(center);
+    if (old_center - center).length_squared() < 1.0e-16 && (old_radius - radius).abs() < 1.0e-9 {
+        return false;
+    }
+    let toward_text = to_dvec(radial.base.text_middle_point) - old_center;
+    let direction = toward_text
+        .try_normalize()
+        .or_else(|| (to_dvec(radial.definition_point) - old_center).try_normalize())
+        .unwrap_or(glam::DVec3::X);
+    let beyond = toward_text.length() - old_radius;
+    let chord = center + direction * radius;
+    let text = center + direction * (radius + beyond);
+    radial.angle_vertex = to_vec(center);
+    radial.definition_point = to_vec(chord);
+    radial.base.definition_point = to_vec(chord);
+    radial.base.text_middle_point = to_vec(text);
+    radial.base.insertion_point = to_vec(text);
+    radial.leader_length = (text - chord).length();
+    radial.base.actual_measurement = radius;
+    true
+}
+
 /// The end points of a line reference: a line's two ends, or the picked
 /// polyline segment's vertices.
 fn line_ends(entity: &acadrust::EntityType, reference: ParametricRef) -> Option<(Vector3, Vector3)> {
@@ -673,6 +731,11 @@ pub(crate) fn dimensional_anchor_refs(
     let Some(&first) = refs.first() else {
         return Vec::new();
     };
+    // A whole circle or arc (a radius or diameter): its center stays and the
+    // value resizes it.
+    if refs.len() == 1 && first.marker.is_none() {
+        return vec![ParametricRef::center(first.entity)];
+    }
     // Three point references: a three-point angle `[first, vertex, second]`.
     if refs.len() == 3
         && refs
@@ -1983,6 +2046,7 @@ impl super::Scene {
             String,
             Option<(Vector3, Vector3)>,
             Option<Vec<Vector3>>,
+            Option<(Vector3, f64)>,
         )> = Vec::new();
         // A reference (driven) constraint's parameter follows the geometry.
         let mut followed: Vec<(String, f64)> = Vec::new();
@@ -2010,7 +2074,15 @@ impl super::Scene {
                     constraint.kind,
                     ConstraintKind::Angle | ConstraintKind::Angle3Point
                 );
-                let measured = points.filter(|_| !angular).map(|(first, second)| {
+                // A radius: the circle's or arc's center and radius now.
+                let radial = (constraint.kind == ConstraintKind::Radius)
+                    .then(|| {
+                        let reference = constraint.refs.first()?;
+                        radial_geometry(self.document.get_entity(reference.entity)?)
+                    })
+                    .flatten();
+                let measured = radial.map(|(_, radius)| radius);
+                let measured = measured.or(points.filter(|_| !angular).map(|(first, second)| {
                     let delta = second - first;
                     let axis = match self.document.get_entity(*dimension) {
                         Some(acadrust::EntityType::Dimension(
@@ -2026,7 +2098,7 @@ impl super::Scene {
                         }
                         _ => delta.length(),
                     }
-                });
+                }));
                 let (name, value, source) = match &constraint.driving_param {
                     Some(DrivingValue::Named(name)) => {
                         let value = match (reference, measured) {
@@ -2070,6 +2142,7 @@ impl super::Scene {
                     ),
                     points,
                     angle_points,
+                    radial,
                 ));
             }
         }
@@ -2079,7 +2152,7 @@ impl super::Scene {
                 let _ = self.named_parameters.set(&name, &source);
             }
         }
-        for (handle, text, points, angle_points) in updates {
+        for (handle, text, points, angle_points, radial) in updates {
             let Some(acadrust::EntityType::Dimension(mut dimension)) =
                 self.document.get_entity(handle).cloned()
             else {
@@ -2096,6 +2169,11 @@ impl super::Scene {
                     changed = true;
                 }
             }
+            if let Some((center, radius)) = radial {
+                if dynamic_dimension_follow_radius(&mut dimension, center, radius) {
+                    changed = true;
+                }
+            }
             if dimension.base().user_text.as_deref() != Some(text.as_str()) {
                 crate::entities::dimension::set_dimension_text_override(
                     dimension.base_mut(),

src/scene/parametric_solve.rs

@@ -996,14 +996,15 @@ fn resolved_target(params: &ParameterTable, constraint: &ParametricConstraint) -
     // A dimensional distance keeps its sign in the parameter but measures
     // its magnitude, as the reference does (`d1=-50` shortens the line to
     // 50; `0` folds the points together).
-    if constraint.kind == ConstraintKind::Distance {
-        return Some(value.abs());
+    // A radius or diameter likewise (`rad1=-20` is a radius of 20); zero is
+    // no circle at all.
+    match constraint.kind {
+        ConstraintKind::Distance => Some(value.abs()),
+        ConstraintKind::Radius | ConstraintKind::Diameter => {
+            (value != 0.0).then(|| value.abs())
+        }
+        _ => Some(value),
     }
-    let must_be_positive = matches!(
-        constraint.kind,
-        ConstraintKind::Radius | ConstraintKind::Diameter
-    );
-    (!must_be_positive || value > 0.0).then_some(value)
 }
 
 fn oriented_distance(target: f64, current_projection: f64) -> f64 {

src/ui/ribbon/widgets.rs

@@ -480,6 +480,30 @@ pub(super) fn make_tip(tip: String) -> Element<'static, Message> {
     text(tip).size(11).into()
 }
 
+/// The sentence the reference shows under a tool's name, where known.
+fn tool_description(id: &str) -> Option<&'static str> {
+    Some(match id {
+        "DCLINEAR" => "Constrains the horizontal or vertical distance between points",
+        "DCHORIZONTAL" => "Constrains the X-distance between points on an object, or between two points on different objects",
+        "DCVERTICAL" => "Constrains the Y-distance between points on an object, or between two points on different objects",
+        "DCALIGNED" => "Constrains the distance between two points on an object or between two points on different objects",
+        "DCRADIUS" => "Constrains the radius of a circle or arc",
+        "DCDIAMETER" => "Constrains the diameter of a circle or arc",
+        "DCANGULAR" => "Constrains the angle between line or polyline segments, the angle swept out by an arc or a polyline arc segment, or the angle between three points on objects",
+        "DCCONVERT" => "Convert dimensions to dimensional constraints",
+        _ => return None,
+    })
+}
+
+/// A tool's tooltip: its name, its description when one is known, and the
+/// command it runs.
+fn tool_tip_text(label: &str, id: &str) -> String {
+    match tool_description(id) {
+        Some(description) => format!("{label}\n{}\n{} {id}", t!(description), t!("Command:")),
+        None => format!("{label}\n{} {id}", t!("Command:")),
+    }
+}
+
 pub(super) fn tip_style(theme: &Theme) -> container::Style {
     let palette = theme.palette();
     container::Style {
@@ -511,7 +535,7 @@ pub(super) fn render_small<'a>(
             let active = is_active_tool(t.id, active_tool, &state);
             let event = t.event.clone();
             let tool_id = t.id.to_string();
-            let tip_text = format!("{}\n{} {}", t!(t.label), t!("Command:"), t.id);
+            let tip_text = tool_tip_text(&t!(t.label), t.id);
             let btn = button(make_icon(t.icon, SMALL_ICON))
                 .on_press(Message::RibbonToolClick { tool_id, event })
                 .style(move |theme: &Theme, status| tool_btn_style(theme, active, status))
@@ -530,7 +554,7 @@ pub(super) fn render_small<'a>(
             let event = t.event.clone();
             let tool_id = t.id.to_string();
             let label = t!(t.label).into_owned();
-            let tip_text = format!("{}\n{} {}", label, t!("Command:"), t.id);
+            let tip_text = tool_tip_text(&label, t.id);
             let content = row![
                 container(make_icon(t.icon, SMALL_ICON)).width(Length::Fixed(SMALL_W)),
                 text(label).size(10).wrapping(advanced_text::Wrapping::None),
@@ -588,7 +612,7 @@ pub(super) fn render_small<'a>(
                 })
                 .or_else(|| items.first().map(|(_, lbl, _)| *lbl))
                 .unwrap_or(*id);
-            let tip_text = format!("{}\n{} {}", t!(cur_label), t!("Command:"), last);
+            let tip_text = tool_tip_text(&t!(cur_label), last);
 
             let icon_btn = button(make_icon(cur_icon, SMALL_ICON))
                 .on_press(Message::RibbonToolClick {
@@ -658,7 +682,7 @@ pub(super) fn render_small<'a>(
                 .on_press(Message::ToggleRibbonDropdown(id.to_string()))
                 .style(move |theme: &Theme, status| tool_btn_style(theme, dd_open, status))
                 .width(Length::Fixed(ARROW_W)).height(ROW_H).padding(0);
-            let face_tip = format!("{}\n{} {}", localized_label, t!("Command:"), last);
+            let face_tip = tool_tip_text(&localized_label, last);
             let arrow_tip = format!("{} {}", localized_label, t!("options"));
             PosReport::new(*id, row![
                 tooltip(face_btn, make_tip(face_tip), TipPos::Right)
@@ -727,7 +751,7 @@ pub(super) fn render_large_dropdown<'a>(
         .or_else(|| items.first().map(|(_, lbl, _)| *lbl))
         .unwrap_or(id);
     let label = t!(explicit_label.unwrap_or(cur_label)).into_owned();
-    let tip_text = format!("{}\n{} {}", t!(cur_label), t!("Command:"), last);
+    let tip_text = tool_tip_text(&t!(cur_label), last);
     let arr_tip = format!("{} {}", label, t!("options"));
 
     // The label owns the bottom of the face. The icon's Fill container centers
@@ -864,7 +888,7 @@ pub(super) fn render_large<'a>(
             let event = t.event.clone();
             let tool_id = t.id.to_string();
             let label = t!(t.label).into_owned();
-            let tip_text = format!("{}\n{} {}", label, t!("Command:"), t.id);
+            let tip_text = tool_tip_text(&label, t.id);
             let btn = button(
                 column![
                     container(make_icon(t.icon, LARGE_ICON))