Merge pull request #1751 from ramox81/codex/adjust-parity

ADJUST: images and underlays, -IMAGEADJUST and PDF/DWF/DGNADJUST

locales/ar-SA/opencadstudio.ftl

@@ -1160,7 +1160,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: أدخل Left أو Top أو Right.
     .isodraft-expected-on-or-off = ISODRAFT: أدخل On أو Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: العناصر المحددة على طبقات مقفلة.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: لم يتم تحديد صور نقطية أو الخاصية غير معروفة (استخدم BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: أدخل عددًا صحيحًا من -4 إلى 4.
     .usage-datalink-path-to-csv = الاستخدام: DATALINK <مسار-ملف-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: لم يتم العثور على جداول مرتبطة.
@@ -4008,6 +4007,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = حدد صورة أو طبقة سفلية:
+    .adjust-select-pdf-underlay = حدد طبقة سفلية PDF:
+    .adjust-select-dwf-underlay = حدد طبقة سفلية DWF:
+    .adjust-select-dgn-underlay = حدد طبقة سفلية DGN:
+    .adjust-mixed-underlays = *مجموعة تحديد غير صالحة. حدد طبقات سفلية من نوع الملف نفسه فقط.*
+    .adjust-image-option = أدخل خيار الصورة [التباين/التلاشي/السطوع] <السطوع>:
+    .adjust-underlay-option = أدخل خيار الطبقة السفلية __ocs_arg_kind__ [التلاشي/التباين/أحادي اللون] <__ocs_arg_option__>:
+    .adjust-monochrome = أحادي اللون? [نعم/لا] <__ocs_arg_value__>:
+    .adjust-brightness-value = أدخل قيمة السطوع (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = أدخل قيمة التباين (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = أدخل قيمة التلاشي (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = يجب أن تكون القيمة عددًا صحيحًا بين 0 و 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4755,13 +4766,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: لا توجد بيانات موسعة.
     .value-3d-orbit = مدار ثلاثي الأبعاد
     .value-3d-orbit-drag-with-right-mouse-button = المدار ثلاثي الأبعاد: اسحب بزر الفأرة الأيمن.
-    .adjust-brightness-contrast-fade = ADJUST  [السطوع / التباين / التلاشي]:
-    .adjust-brightness-0-100 = ADJUST  السطوع 0-100:
-    .adjust-contrast-0-100 = ADJUST  التباين 0-100:
-    .adjust-fade-0-100 = ADJUST  التلاشي 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: حدد صورة نقطية أولًا.
-    .adjust-value-must-be-0-100 = ADJUST: يجب أن تكون القيمة بين 0 و100.
-    .adjust-action-v-on-changed-image-s = ADJUST: ‏__ocs_fmt_0__ = __ocs_fmt_1__ على __ocs_fmt_2__ صورة.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  القيمة الجديدة [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: أدخل 0 أو 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  القيمة الجديدة [-4..4]:
@@ -4887,7 +4891,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = الطبقة السفلية __ocs_fmt_0__: التلاشي=__ocs_fmt_1__، التباين=__ocs_fmt_2__، التشغيل=__ocs_fmt_3__، القص=__ocs_fmt_4__، الأحادي=__ocs_fmt_5__
     .updated-changed-underlay-s = تم تحديث __ocs_fmt_0__ طبقة سفلية.
-    .usage-adjust-brightness-contrast-fade-0-100 = الاستخدام: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = الاستخدام: ANNOSCALE <ratio> مثلًا 1:50 أو 2:1 أو معامل
     .usage-draworder-f-front-b-back-a-above-handle = الاستخدام: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = الاستخدام: HYPERLINK <url> (حدد الكائنات أولًا)

locales/bg-BG/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: въведете Left, Top или Right.
     .isodraft-expected-on-or-off = ISODRAFT: въведете On или Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: избраните обекти са в заключени слоеве.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: няма избрани растерни изображения или свойството е неизвестно (използвайте BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: въведете цяло число от -4 до 4.
     .usage-datalink-path-to-csv = Употреба: DATALINK <път-до-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: няма намерени свързани таблици.
@@ -3995,6 +3994,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Изберете изображение или подложка:
+    .adjust-select-pdf-underlay = Изберете подложка PDF:
+    .adjust-select-dwf-underlay = Изберете подложка DWF:
+    .adjust-select-dgn-underlay = Изберете подложка DGN:
+    .adjust-mixed-underlays = *Невалиден набор за избор. Изберете само подложки от един и същ файлов тип.*
+    .adjust-image-option = Въведете опция за изображение [Контраст/Заглушаване/Яркост] <Яркост>:
+    .adjust-underlay-option = Въведете опция за подложка __ocs_arg_kind__ [Заглушаване/Контраст/Монохромно] <__ocs_arg_option__>:
+    .adjust-monochrome = Монохромно? [Да/Не] <__ocs_arg_value__>:
+    .adjust-brightness-value = Въведете стойност: яркост (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Въведете стойност: контраст (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Въведете стойност: заглушаване (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Стойността трябва да е цяло число между 0 и 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4742,13 +4753,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: няма xdata.
     .value-3d-orbit = 3D Орбита
     .value-3d-orbit-drag-with-right-mouse-button = 3D Орбита: влачи с десен бутон на мишката.
-    .adjust-brightness-contrast-fade = ADJUST  [Яркост / Контраст / Заглушаване]:
-    .adjust-brightness-0-100 = ADJUST  яркост 0-100:
-    .adjust-contrast-0-100 = ADJUST  контраст 0-100:
-    .adjust-fade-0-100 = ADJUST  заглушаване 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: първо избери растерно изображение(я).
-    .adjust-value-must-be-0-100 = ADJUST: стойността трябва да е 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ на __ocs_fmt_2__ изображение(я).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  нова стойност [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: въведи 0 или 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  нова стойност [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Подложка __ocs_fmt_0__: заглушаване=__ocs_fmt_1__, контраст=__ocs_fmt_2__, вкл.=__ocs_fmt_3__, изрязване=__ocs_fmt_4__, моно=__ocs_fmt_5__
     .updated-changed-underlay-s = Обновени __ocs_fmt_0__ подложка(и).
-    .usage-adjust-brightness-contrast-fade-0-100 = Употреба: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Употреба: ANNOSCALE <съотношение>  напр. 1:50, 2:1, или фактор
     .usage-draworder-f-front-b-back-a-above-handle = Употреба: DRAWORDER F|FRONT | B|BACK | A|ABOVE <манипулатор> | U|UNDER <манипулатор>
     .usage-hyperlink-url-select-objects-first = Употреба: HYPERLINK <url>   (първо избери обекти)

locales/cs-CZ/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: zadejte Left, Top nebo Right.
     .isodraft-expected-on-or-off = ISODRAFT: zadejte On nebo Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: vybrané objekty jsou v uzamčených hladinách.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nejsou vybrány rastrové obrázky nebo je vlastnost neznámá (použijte BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: zadejte celé číslo od -4 do 4.
     .usage-datalink-path-to-csv = Použití: DATALINK <cesta-k-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nebyly nalezeny propojené tabulky.
@@ -3993,6 +3992,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Vyberte obrázek nebo podklad:
+    .adjust-select-pdf-underlay = Vyberte podklad PDF:
+    .adjust-select-dwf-underlay = Vyberte podklad DWF:
+    .adjust-select-dgn-underlay = Vyberte podklad DGN:
+    .adjust-mixed-underlays = *Neplatná sada výběru. Vyberte pouze podklady stejného typu souboru.*
+    .adjust-image-option = Zadejte možnost obrázku [Kontrast/Vyblednout/Jas] <Jas>:
+    .adjust-underlay-option = Zadejte možnost podkladu __ocs_arg_kind__ [Vyblednout/Kontrast/Monochromatický] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochromatický? [Ano/ne] <__ocs_arg_value__>:
+    .adjust-brightness-value = Zadejte hodnotu: jas (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Zadejte hodnotu: kontrast (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Zadejte hodnotu: vyblednout (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Hodnota musí být celé číslo mezi 0 a 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4740,13 +4751,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: žádná xdata.
     .value-3d-orbit = 3D oběh
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: táhněte pravým tlačítkem myši.
-    .adjust-brightness-contrast-fade = ADJUST [Jas / Kontrast / Vyblednutí]:
-    .adjust-brightness-0-100 = Jas ADJUST 0-100:
-    .adjust-contrast-0-100 = ADJUST kontrast 0-100:
-    .adjust-fade-0-100 = ADJUST prolínání 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: nejprve vyberte rastrový obrázek(y).
-    .adjust-value-must-be-0-100 = ADJUST: hodnota musí být 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ na snímcích __ocs_fmt_2__.
     .annoallvisible-new-value-0-1 = Nová hodnota ANNOALLVISIBLE [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: zadejte 0 nebo 1.
     .annoautoscale-new-value-4-4 = Nová hodnota ANNOAUTOSCALE [-4..4]:
@@ -4872,7 +4876,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Podložka __ocs_fmt_0__: vyblednout=__ocs_fmt_1__, kontrast=__ocs_fmt_2__, na=__ocs_fmt_3__, klip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Aktualizované podložky __ocs_fmt_0__.
-    .usage-adjust-brightness-contrast-fade-0-100 = Použití: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Použití: ANNOSCALE <ratio> např. 1:50, 2:1 nebo faktor
     .usage-draworder-f-front-b-back-a-above-handle = Používání: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Použití: HYPERLINK <url> (nejprve vyberte objekty)

locales/de-DE/opencadstudio.ftl

@@ -1148,7 +1148,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top oder Right eingeben.
     .isodraft-expected-on-or-off = ISODRAFT: On oder Off eingeben.
     .xdata-selected-entities-are-on-locked-layers = XDATA: Ausgewählte Objekte liegen auf gesperrten Layern.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: Keine Rasterbilder ausgewählt oder unbekannte Eigenschaft (BRIGHTNESS/CONTRAST/FADE verwenden).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: Eine ganze Zahl von -4 bis 4 eingeben.
     .usage-datalink-path-to-csv = Aufruf: DATALINK <Pfad-zur-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: keine verknüpften Tabellen gefunden.
@@ -3994,6 +3993,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Bild oder Unterlage wählen:
+    .adjust-select-pdf-underlay = PDF-Unterlage wählen:
+    .adjust-select-dwf-underlay = DWF-Unterlage wählen:
+    .adjust-select-dgn-underlay = DGN-Unterlage wählen:
+    .adjust-mixed-underlays = *Ungültiger Auswahlsatz. Nur Unterlagenobjekte desselben Dateityps wählen.*
+    .adjust-image-option = Bildoption eingeben [Kontrast/Abblendung/Helligkeit] <Helligkeit>:
+    .adjust-underlay-option = __ocs_arg_kind__-Unterlagenoption eingeben [Abblendung/Kontrast/Monochrom] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochrom? [Ja/Nein] <__ocs_arg_value__>:
+    .adjust-brightness-value = Wert für Helligkeit eingeben (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Wert für Kontrast eingeben (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Wert für Abblendung eingeben (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Der Wert muss eine ganze Zahl zwischen 0 und 100 sein.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4741,13 +4752,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: keine xdata.
     .value-3d-orbit = 3D-Bahn
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: Ziehen Sie mit der rechten Maustaste.
-    .adjust-brightness-contrast-fade = ADJUST [Helligkeit / Kontrast / Ausblenden]:
-    .adjust-brightness-0-100 = ADJUST  Helligkeit 0-100:
-    .adjust-contrast-0-100 = ADJUST  Kontrast 0-100:
-    .adjust-fade-0-100 = ADJUST Ausblenden 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: Wählen Sie zuerst Rasterbild(e).
-    .adjust-value-must-be-0-100 = ADJUST: Der Wert muss 0-100 sein.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ auf __ocs_fmt_2__ Bild(en).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  neuer Wert [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: Geben Sie 0 oder 1 ein.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  neuer Wert [-4..4]:
@@ -4873,7 +4877,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Unterlag __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Aktualisiert __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Verwendung: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Verwendung: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Verwendung: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Verwendung: HYPERLINK <url>   (select objects first)

locales/el-GR/opencadstudio.ftl

@@ -1149,7 +1149,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: πληκτρολογήστε Left, Top ή Right.
     .isodraft-expected-on-or-off = ISODRAFT: πληκτρολογήστε On ή Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: οι επιλεγμένες οντότητες βρίσκονται σε κλειδωμένα επίπεδα.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: δεν έχουν επιλεγεί εικόνες ράστερ ή η ιδιότητα είναι άγνωστη (χρησιμοποιήστε BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: εισαγάγετε ακέραιο από -4 έως 4.
     .usage-datalink-path-to-csv = Χρήση: DATALINK <διαδρομή-προς-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: δεν βρέθηκαν συνδεδεμένοι πίνακες.
@@ -4006,6 +4005,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Επιλέξτε εικόνα ή υπόβαθρο:
+    .adjust-select-pdf-underlay = Επιλέξτε υπόβαθρο PDF:
+    .adjust-select-dwf-underlay = Επιλέξτε υπόβαθρο DWF:
+    .adjust-select-dgn-underlay = Επιλέξτε υπόβαθρο DGN:
+    .adjust-mixed-underlays = *Μη έγκυρο σύνολο επιλογής. Επιλέξτε μόνο υπόβαθρα του ίδιου τύπου αρχείου.*
+    .adjust-image-option = Εισαγάγετε επιλογή εικόνας [Αντίθεση/Ξεθώριασμα/Φωτεινότητα] <Φωτεινότητα>:
+    .adjust-underlay-option = Εισαγάγετε επιλογή υποβάθρου __ocs_arg_kind__ [Ξεθώριασμα/Αντίθεση/Μονόχρωμο] <__ocs_arg_option__>:
+    .adjust-monochrome = Μονόχρωμο? [Ναι/Όχι] <__ocs_arg_value__>:
+    .adjust-brightness-value = Εισαγάγετε τιμή: φωτεινότητα (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Εισαγάγετε τιμή: αντίθεση (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Εισαγάγετε τιμή: ξεθώριασμα (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Η τιμή πρέπει να είναι ακέραιος αριθμός από 0 έως 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4736,13 +4747,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: χωρίς xdata.
     .value-3d-orbit = Τροχιά 3D
     .value-3d-orbit-drag-with-right-mouse-button = Τροχιά 3D: σύρετε με το δεξί πλήκτρο του ποντικιού.
-    .adjust-brightness-contrast-fade = ADJUST  [Φωτεινότητα / Αντίθεση / Ξεθώριασμα]:
-    .adjust-brightness-0-100 = ADJUST  φωτεινότητα 0-100:
-    .adjust-contrast-0-100 = ADJUST  αντίθεση 0-100:
-    .adjust-fade-0-100 = ADJUST  ξεθώριασμα 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: επιλέξτε πρώτα εικόνα(ες) ράστερ.
-    .adjust-value-must-be-0-100 = ADJUST: η τιμή πρέπει να είναι 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ σε __ocs_fmt_2__ εικόνα(ες).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  νέα τιμή [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: δώστε 0 ή 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  νέα τιμή [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Υπόβαθρο __ocs_fmt_0__: ξεθώριασμα=__ocs_fmt_1__, αντίθεση=__ocs_fmt_2__, ενεργό=__ocs_fmt_3__, αποκοπή=__ocs_fmt_4__, μονόχρωμο=__ocs_fmt_5__
     .updated-changed-underlay-s = Ενημερώθηκαν __ocs_fmt_0__ υπόβαθρο(α).
-    .usage-adjust-brightness-contrast-fade-0-100 = Χρήση: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Χρήση: ANNOSCALE <λόγος>  π.χ. 1:50, 2:1 ή συντελεστής
     .usage-draworder-f-front-b-back-a-above-handle = Χρήση: DRAWORDER F|FRONT | B|BACK | A|ABOVE <αναγνωριστικό> | U|UNDER <αναγνωριστικό>
     .usage-hyperlink-url-select-objects-first = Χρήση: HYPERLINK <url>   (επιλέξτε πρώτα αντικείμενα)

locales/en-US/opencadstudio.ftl

@@ -1146,7 +1146,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: expected Left, Top, or Right.
     .isodraft-expected-on-or-off = ISODRAFT: expected On or Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: selected entities are on locked layers.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: enter an integer from -4 through 4.
     .usage-datalink-path-to-csv = Usage: DATALINK <path-to-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: no linked tables found.
@@ -4006,6 +4005,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Select image or underlay:
+    .adjust-select-pdf-underlay = Select PDF underlay:
+    .adjust-select-dwf-underlay = Select DWF underlay:
+    .adjust-select-dgn-underlay = Select DGN underlay:
+    .adjust-mixed-underlays = *Invalid selection set. Select underlay objects of the same file type only.*
+    .adjust-image-option = Enter image option [Contrast/Fade/Brightness] <Brightness>:
+    .adjust-underlay-option = Enter __ocs_arg_kind__ underlay option [Fade/Contrast/Monochrome] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochrome? [Yes/No] <__ocs_arg_value__>:
+    .adjust-brightness-value = Enter brightness value (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Enter contrast value (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Enter fade value (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Value must be an integer between 0 and 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4735,13 +4746,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: no xdata.
     .value-3d-orbit = 3D Orbit
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: drag with right mouse button.
-    .adjust-brightness-contrast-fade = ADJUST  [Brightness / Contrast / Fade]:
-    .adjust-brightness-0-100 = ADJUST  brightness 0-100:
-    .adjust-contrast-0-100 = ADJUST  contrast 0-100:
-    .adjust-fade-0-100 = ADJUST  fade 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: select raster image(s) first.
-    .adjust-value-must-be-0-100 = ADJUST: value must be 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ on __ocs_fmt_2__ image(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  new value [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: enter 0 or 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  new value [-4..4]:
@@ -4873,7 +4877,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Underlay __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Updated __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Usage: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Usage: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Usage: HYPERLINK <url>   (select objects first)

locales/es-ES/opencadstudio.ftl

@@ -1148,7 +1148,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: introduzca Left, Top o Right.
     .isodraft-expected-on-or-off = ISODRAFT: introduzca On u Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: las entidades seleccionadas están en capas bloqueadas.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: no hay imágenes ráster seleccionadas o la propiedad es desconocida (use BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: introduzca un entero de -4 a 4.
     .usage-datalink-path-to-csv = Uso: DATALINK <ruta-al-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: no se encontraron tablas vinculadas.
@@ -3996,6 +3995,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Seleccione una imagen o un calco subyacente:
+    .adjust-select-pdf-underlay = Seleccione un calco subyacente PDF:
+    .adjust-select-dwf-underlay = Seleccione un calco subyacente DWF:
+    .adjust-select-dgn-underlay = Seleccione un calco subyacente DGN:
+    .adjust-mixed-underlays = *Conjunto de selección no válido. Seleccione solo calcos subyacentes del mismo tipo de archivo.*
+    .adjust-image-option = Indique una opción de imagen [Contraste/Desvanecimiento/Brillo] <Brillo>:
+    .adjust-underlay-option = Indique una opción de calco subyacente __ocs_arg_kind__ [Desvanecimiento/Contraste/Monocromo] <__ocs_arg_option__>:
+    .adjust-monochrome = Monocromo? [Sí/No] <__ocs_arg_value__>:
+    .adjust-brightness-value = Indique el valor de brillo (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Indique el valor de contraste (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Indique el valor de desvanecimiento (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = El valor debe ser un número entero entre 0 y 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4743,13 +4754,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: sin datos extendidos.
     .value-3d-orbit = Órbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Órbita 3D: arrastre con el botón derecho del ratón.
-    .adjust-brightness-contrast-fade = ADJUST  [Brillo/Contraste/Desvanecimiento]:
-    .adjust-brightness-0-100 = ADJUST  Brillo 0-100:
-    .adjust-contrast-0-100 = ADJUST  Contraste 0-100:
-    .adjust-fade-0-100 = ADJUST  Desvanecimiento 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: seleccione primero una o más imágenes ráster.
-    .adjust-value-must-be-0-100 = ADJUST: el valor debe estar entre 0 y 100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ en __ocs_fmt_2__ imagen(es).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  Valor nuevo [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: introduzca 0 o 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  Valor nuevo [-4..4]:
@@ -4875,7 +4879,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Calco __ocs_fmt_0__: difuminado=__ocs_fmt_1__, contraste=__ocs_fmt_2__, activado=__ocs_fmt_3__, delimitado=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Se actualizaron __ocs_fmt_0__ calcos subyacentes.
-    .usage-adjust-brightness-contrast-fade-0-100 = Uso: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Uso: ANNOSCALE <relación>  p. ej., 1:50, 2:1 o un factor
     .usage-draworder-f-front-b-back-a-above-handle = Uso: DRAWORDER F|FRONT | B|BACK | A|ABOVE <identificador> | U|UNDER <identificador>
     .usage-hyperlink-url-select-objects-first = Uso: HYPERLINK <url> (seleccione primero los objetos)

locales/fi-FI/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: anna Left, Top tai Right.
     .isodraft-expected-on-or-off = ISODRAFT: anna On tai Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: valitut objektit ovat lukituilla tasoilla.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: rasterikuvia ei ole valittu tai ominaisuus on tuntematon (käytä BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: anna kokonaisluku väliltä -4–4.
     .usage-datalink-path-to-csv = Käyttö: DATALINK <.csv-tiedoston-polku>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: linkitettyjä taulukoita ei löytynyt.
@@ -3995,6 +3994,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Valitse kuva tai pohja:
+    .adjust-select-pdf-underlay = Valitse PDF-pohja:
+    .adjust-select-dwf-underlay = Valitse DWF-pohja:
+    .adjust-select-dgn-underlay = Valitse DGN-pohja:
+    .adjust-mixed-underlays = *Virheellinen valintajoukko. Valitse vain samaa tiedostotyyppiä olevia pohjia.*
+    .adjust-image-option = Anna kuvan asetus [Kontrasti/Häivyttää/Kirkkaus] <Kirkkaus>:
+    .adjust-underlay-option = Anna __ocs_arg_kind__-pohjan asetus [Häivyttää/Kontrasti/Yksivärinen] <__ocs_arg_option__>:
+    .adjust-monochrome = Yksivärinen? [Kyllä/Ei] <__ocs_arg_value__>:
+    .adjust-brightness-value = Anna arvo: kirkkaus (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Anna arvo: kontrasti (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Anna arvo: häivyttää (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Arvon on oltava kokonaisluku väliltä 0–100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4742,13 +4753,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: ei xdataa.
     .value-3d-orbit =3D kiertorata
     .value-3d-orbit-drag-with-right-mouse-button = 3D-kiertorata: vedä hiiren oikealla painikkeella.
-    .adjust-brightness-contrast-fade = ADJUST [Kirkkaus / Kontrasti / Haalistuminen]:
-    .adjust-brightness-0-100 = ADJUST kirkkaus 0-100:
-    .adjust-contrast-0-100 = ADJUST kontrasti 0-100:
-    .adjust-fade-0-100 = ADJUST häivytys 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: valitse ensin rasterikuva(t).
-    .adjust-value-must-be-0-100 = ADJUST: arvon on oltava 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ __ocs_fmt_2__-kuvissa.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE uusi arvo [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: kirjoita 0 tai 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE uusi arvo [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USER__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Aluskate __ocs_fmt_0__: haalistua=__ocs_fmt_1__, kontrasti=__ocs_fmt_2__, päällä=__ocs_fmt_3__, klipsi=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Päivitetty __ocs_fmt_0__-alusta(t).
-    .usage-adjust-brightness-contrast-fade-0-100 = Käyttö: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Käyttö: ANNOSCALE <ratio> esim. 1:50, 2:1 tai kerroin
     .usage-draworder-f-front-b-back-a-above-handle = Käyttö: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Käyttö: HYPERLINK <url> (valitse ensin objektit)

locales/fr-FR/opencadstudio.ftl

@@ -1148,7 +1148,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE : saisissez Left, Top ou Right.
     .isodraft-expected-on-or-off = ISODRAFT : saisissez On ou Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA : les objets sélectionnés sont sur des calques verrouillés.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST : aucune image matricielle sélectionnée ou propriété inconnue (utilisez BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE : saisissez un entier entre -4 et 4.
     .usage-datalink-path-to-csv = Utilisation : DATALINK <chemin-du-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE : aucune table liée trouvée.
@@ -3996,6 +3995,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Sélectionnez une image ou un calque sous-jacent :
+    .adjust-select-pdf-underlay = Sélectionnez un calque sous-jacent PDF :
+    .adjust-select-dwf-underlay = Sélectionnez un calque sous-jacent DWF :
+    .adjust-select-dgn-underlay = Sélectionnez un calque sous-jacent DGN :
+    .adjust-mixed-underlays = *Jeu de sélection non valide. Sélectionnez uniquement des calques sous-jacents du même type de fichier.*
+    .adjust-image-option = Entrez une option d'image [Contraste/Estompage/Luminosité] <Luminosité>:
+    .adjust-underlay-option = Entrez une option de calque sous-jacent __ocs_arg_kind__ [Estompage/Contraste/Monochrome] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochrome? [Oui/Non] <__ocs_arg_value__>:
+    .adjust-brightness-value = Entrez la valeur de luminosité (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Entrez la valeur de contraste (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Entrez la valeur d’estompage (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = La valeur doit être un nombre entier compris entre 0 et 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4744,13 +4755,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: pas de xdata.
     .value-3d-orbit = Orbite 3D
     .value-3d-orbit-drag-with-right-mouse-button = Orbite 3D: faites glisser avec le bouton droit de la souris.
-    .adjust-brightness-contrast-fade = ADJUST [Luminosité / Contraste / Estompage] :
-    .adjust-brightness-0-100 = ADJUST  luminosité 0-100:
-    .adjust-contrast-0-100 = ADJUST  contraste 0-100:
-    .adjust-fade-0-100 = ADJUST  estompage 0-100 :
-    .adjust-select-raster-image-s-first = ADJUST : sélectionnez d'abord les images master.
-    .adjust-value-must-be-0-100 = ADJUST: la valeur doit être 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ sur __ocs_fmt_2__ image(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  nouvelle valeur [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE : entrez 0 ou 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  nouvelle valeur [-4..4]:
@@ -4876,7 +4880,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Sous-couche __ocs_fmt_0__ : estompage=__ocs_fmt_1__, contraste=__ocs_fmt_2__, actif=__ocs_fmt_3__, délimitation=__ocs_fmt_4__, monochrome=__ocs_fmt_5__
     .updated-changed-underlay-s = Mise à jour de __ocs_fmt_0__ sous-couche(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Utilisation : ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Utilisation : ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Utilisation : DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Utilisation : HYPERLINK <url>   (select objects first)

locales/hi-IN/opencadstudio.ftl

@@ -1136,7 +1136,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top या Right दर्ज करें।
     .isodraft-expected-on-or-off = ISODRAFT: On या Off दर्ज करें।
     .xdata-selected-entities-are-on-locked-layers = XDATA: चयनित इकाइयाँ लॉक लेयर पर हैं।
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: कोई रास्टर छवि चयनित नहीं है या गुण अज्ञात है (BRIGHTNESS/CONTRAST/FADE उपयोग करें)।
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4 से 4 तक पूर्णांक दर्ज करें।
     .usage-datalink-path-to-csv = उपयोग: DATALINK <.csv-का-पथ>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: कोई लिंक की गई तालिका नहीं मिली।
@@ -3984,6 +3983,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = छवि या अंडरले चुनें:
+    .adjust-select-pdf-underlay = PDF अंडरले चुनें:
+    .adjust-select-dwf-underlay = DWF अंडरले चुनें:
+    .adjust-select-dgn-underlay = DGN अंडरले चुनें:
+    .adjust-mixed-underlays = *अमान्य चयन सेट। केवल एक ही फ़ाइल प्रकार के अंडरले चुनें।*
+    .adjust-image-option = छवि विकल्प दर्ज करें [कंट्रास्ट/फेड/चमक] <चमक>:
+    .adjust-underlay-option = __ocs_arg_kind__ अंडरले विकल्प दर्ज करें [फेड/कंट्रास्ट/मोनोक्रोम] <__ocs_arg_option__>:
+    .adjust-monochrome = मोनोक्रोम? [हाँ/नहीं] <__ocs_arg_value__>:
+    .adjust-brightness-value = चमक मान दर्ज करें (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = कंट्रास्ट मान दर्ज करें (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = फेड मान दर्ज करें (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = मान 0 और 100 के बीच का पूर्णांक होना चाहिए।
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4731,13 +4742,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: कोई Xdata नहीं।
     .value-3d-orbit = 3D कक्षा
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: दाहिने माउस बटन के साथ खींचें।
-    .adjust-brightness-contrast-fade = ADJUST [चमक / कॉन्ट्रास्ट / फेड]:
-    .adjust-brightness-0-100 = ADJUST  चमक 0-100:
-    .adjust-contrast-0-100 = ADJUST  विपरीत 0-100:
-    .adjust-fade-0-100 = ADJUST  फीका 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: पहले रास्टर छवि का चयन करें।
-    .adjust-value-must-be-0-100 = ADJUST: मान 0-100 होना चाहिए।
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ पर __ocs_fmt_2__ छवि(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  नया मान [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 या 1 दर्ज करें।
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  नया मूल्य [-4..4]:
@@ -4863,7 +4867,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Underlay __ocs_fmt_0__: frequ = __ocs_fmt_1__, विपरीत = __ocs_fmt_2__, on=__ocs_fmt_3__, क्लिप =__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = अद्यतन __ocs_fmt_0__ underlay(s)).
-    .usage-adjust-brightness-contrast-fade-0-100 = उपयोग: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = उपयोग: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = उपयोग: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = उपयोग: HYPERLINK <url>   (select objects first)

locales/hu-HU/opencadstudio.ftl

@@ -1152,7 +1152,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: írja be: Left, Top vagy Right.
     .isodraft-expected-on-or-off = ISODRAFT: írja be: On vagy Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: a kijelölt objektumok zárolt fóliákon vannak.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nincs kijelölt raszterkép, vagy ismeretlen a tulajdonság (használja: BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: adjon meg egy egész számot -4 és 4 között.
     .usage-datalink-path-to-csv = Használat: DATALINK <.csv-elérési-út>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nem található csatolt táblázat.
@@ -3992,6 +3991,18 @@ insert =
     .xref-attach-dwg = DWG csatolása
     .xref-attach-image = Kép csatolása
     .select-images = Válasszon képeket:
+    .adjust-select-image-or-underlay = Válasszon képet vagy alátétet:
+    .adjust-select-pdf-underlay = Válasszon PDF alátétet:
+    .adjust-select-dwf-underlay = Válasszon DWF alátétet:
+    .adjust-select-dgn-underlay = Válasszon DGN alátétet:
+    .adjust-mixed-underlays = *Érvénytelen kijelölési készlet. Csak azonos fájltípusú alátéteket válasszon.*
+    .adjust-image-option = Adja meg a kép opcióját [Kontraszt/Halványítás/Fényerő] <Fényerő>:
+    .adjust-underlay-option = Adja meg a(z) __ocs_arg_kind__ alátét opcióját [Halványítás/Kontraszt/Monokróm] <__ocs_arg_option__>:
+    .adjust-monochrome = Monokróm? [Igen/Nem] <__ocs_arg_value__>:
+    .adjust-brightness-value = Adja meg az értéket: fényerő (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Adja meg az értéket: kontraszt (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Adja meg az értéket: halványítás (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Az értéknek 0 és 100 közötti egész számnak kell lennie.
     .transparency-mode-on = Adja meg az átlátszósági módot [ON/OFF] <ON>:
     .transparency-mode-off = Adja meg az átlátszósági módot [ON/OFF] <OFF>:
     .xref-attach-menu = Csatolás…
@@ -4740,13 +4751,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: nincs xdata.
     .value-3d-orbit = 3D keringés
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: húzza a jobb egérgombbal.
-    .adjust-brightness-contrast-fade = ADJUST  [Brightness / Contrast / Fade]:
-    .adjust-brightness-0-100 = ADJUST fényerő 0-100:
-    .adjust-contrast-0-100 = ADJUST kontraszt 0-100:
-    .adjust-fade-0-100 = ADJUST  Halványítás 0–100:
-    .adjust-select-raster-image-s-first = ADJUST: először válassza ki a raszterképe(ke)t.
-    .adjust-value-must-be-0-100 = ADJUST: az értéknek 0 és 100 között kell lennie.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ __ocs_fmt_2__ kép(ek)en.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE új érték [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: írjon be 0 vagy 1 értéket.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE új érték [-4..4]:
@@ -4866,7 +4870,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Alávetítés __ocs_fmt_0__: halványítás=__ocs_fmt_1__, kontraszt=__ocs_fmt_2__, be=__ocs_fmt_3__, körülvágás=__ocs_fmt_4__, egyszínű=__ocs_fmt_5__
     .updated-changed-underlay-s = Frissített __ocs_fmt_0__ alávetítés(ek).
-    .usage-adjust-brightness-contrast-fade-0-100 = Használat: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Használat: ANNOSCALE <ratio> pl. 1:50, 2:1 vagy egy tényező
     .usage-draworder-f-front-b-back-a-above-handle = Használat: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Használat: HYPERLINK <url> (először válassza ki az objektumokat)

locales/it-IT/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: immetti Left, Top o Right.
     .isodraft-expected-on-or-off = ISODRAFT: immetti On o Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: le entità selezionate sono su layer bloccati.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nessuna immagine raster selezionata o proprietà sconosciuta (usa BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: immetti un intero da -4 a 4.
     .usage-datalink-path-to-csv = Uso: DATALINK <percorso-del-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nessuna tabella collegata trovata.
@@ -3995,6 +3994,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Selezionare un'immagine o un sottoposto:
+    .adjust-select-pdf-underlay = Selezionare un sottoposto PDF:
+    .adjust-select-dwf-underlay = Selezionare un sottoposto DWF:
+    .adjust-select-dgn-underlay = Selezionare un sottoposto DGN:
+    .adjust-mixed-underlays = *Gruppo di selezione non valido. Selezionare solo sottoposti dello stesso tipo di file.*
+    .adjust-image-option = Specificare un'opzione immagine [Contrasto/Svanire/Luminosità] <Luminosità>:
+    .adjust-underlay-option = Specificare un'opzione sottoposto __ocs_arg_kind__ [Svanire/Contrasto/Monocromatico] <__ocs_arg_option__>:
+    .adjust-monochrome = Monocromatico? [Sì/No] <__ocs_arg_value__>:
+    .adjust-brightness-value = Specificare il valore di luminosità (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Specificare il valore di contrasto (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Specificare il valore di svanire (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Il valore deve essere un numero intero compreso tra 0 e 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4742,13 +4753,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: nessun dato x.
     .value-3d-orbit =Orbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Orbita 3D: trascina con il tasto destro del mouse.
-    .adjust-brightness-contrast-fade = ADJUST [Luminosità/Contrasto/Dissolvenza]:
-    .adjust-brightness-0-100 = Luminosità ADJUST 0-100:
-    .adjust-contrast-0-100 = ADJUST contrasto 0-100:
-    .adjust-fade-0-100 = ADJUST dissolvenza 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: seleziona prima le immagini raster.
-    .adjust-value-must-be-0-100 = ADJUST: il valore deve essere compreso tra 0 e 100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ sulle immagini __ocs_fmt_2__.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE nuovo valore [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: inserisci 0 o 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE nuovo valore [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Sottofondo __ocs_fmt_0__: dissolvenza=__ocs_fmt_1__, contrasto=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Sottofondi __ocs_fmt_0__ aggiornati.
-    .usage-adjust-brightness-contrast-fade-0-100 = Utilizzo: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Utilizzo: ANNOSCALE <ratio> ad es. 1:50, 2:1 o un fattore
     .usage-draworder-f-front-b-back-a-above-handle = Utilizzo: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Utilizzo: HYPERLINK <url> (selezionare prima gli oggetti)

locales/ja-JP/opencadstudio.ftl

@@ -1138,7 +1138,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left、Top、Right のいずれかを入力してください。
     .isodraft-expected-on-or-off = ISODRAFT: On または Off を入力してください。
     .xdata-selected-entities-are-on-locked-layers = XDATA: 選択した図形はロックされた画層上にあります。
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: ラスター画像が選択されていないか、プロパティが不明です（BRIGHTNESS/CONTRAST/FADE を使用）。
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4 から 4 までの整数を入力してください。
     .usage-datalink-path-to-csv = 使用法: DATALINK <.csvのパス>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: リンクされた表が見つかりません。
@@ -3984,6 +3983,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = イメージまたはアンダーレイを選択:
+    .adjust-select-pdf-underlay = PDF アンダーレイを選択:
+    .adjust-select-dwf-underlay = DWF アンダーレイを選択:
+    .adjust-select-dgn-underlay = DGN アンダーレイを選択:
+    .adjust-mixed-underlays = *選択セットが無効です。同じファイル タイプのアンダーレイのみを選択してください。*
+    .adjust-image-option = イメージ オプションを入力 [コントラスト/フェード/明るさ] <明るさ>:
+    .adjust-underlay-option = __ocs_arg_kind__ アンダーレイ オプションを入力 [フェード/コントラスト/モノクロ] <__ocs_arg_option__>:
+    .adjust-monochrome = モノクロ? [はい/いいえ] <__ocs_arg_value__>:
+    .adjust-brightness-value = 明るさの値を入力 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = コントラストの値を入力 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = フェードの値を入力 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 値は 0 から 100 までの整数でなければなりません。
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4731,13 +4742,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: 拡張データなし。
     .value-3d-orbit = 3D オービット
     .value-3d-orbit-drag-with-right-mouse-button = 3D オービット: マウス右ボタンでドラッグします。
-    .adjust-brightness-contrast-fade = ADJUST  [明るさ / コントラスト / フェード]:
-    .adjust-brightness-0-100 = ADJUST  明るさ 0-100:
-    .adjust-contrast-0-100 = ADJUST  コントラスト 0-100:
-    .adjust-fade-0-100 = ADJUST  フェード 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: 先にラスター画像を選択してください。
-    .adjust-value-must-be-0-100 = ADJUST: 値は 0～100 にしてください。
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_2__ 個の画像で __ocs_fmt_0__ = __ocs_fmt_1__ に変更しました。
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  新しい値 [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 または 1 を入力してください。
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  新しい値 [-4..4]:
@@ -4863,7 +4867,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = アンダーレイ __ocs_fmt_0__: フェード=__ocs_fmt_1__、コントラスト=__ocs_fmt_2__、表示=__ocs_fmt_3__、クリップ=__ocs_fmt_4__、モノクロ=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ 個のアンダーレイを更新しました。
-    .usage-adjust-brightness-contrast-fade-0-100 = 使用法: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 使用法: ANNOSCALE <ratio>  例: 1:50、2:1、または係数
     .usage-draworder-f-front-b-back-a-above-handle = 使用法: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 使用法: HYPERLINK <url>   （先にオブジェクトを選択）

locales/ko-KR/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top 또는 Right를 입력하세요.
     .isodraft-expected-on-or-off = ISODRAFT: On 또는 Off를 입력하세요.
     .xdata-selected-entities-are-on-locked-layers = XDATA: 선택한 객체가 잠긴 도면층에 있습니다.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: 래스터 이미지를 선택하지 않았거나 알 수 없는 속성입니다(BRIGHTNESS/CONTRAST/FADE 사용).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4부터 4까지 정수를 입력하세요.
     .usage-datalink-path-to-csv = 사용법: DATALINK <.csv-경로>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: 연결된 테이블을 찾을 수 없습니다.
@@ -3995,6 +3994,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = 이미지 또는 언더레이 선택:
+    .adjust-select-pdf-underlay = PDF 언더레이 선택:
+    .adjust-select-dwf-underlay = DWF 언더레이 선택:
+    .adjust-select-dgn-underlay = DGN 언더레이 선택:
+    .adjust-mixed-underlays = *선택 세트가 잘못되었습니다. 같은 파일 유형의 언더레이만 선택하십시오.*
+    .adjust-image-option = 이미지 옵션 입력 [대비/페이드/밝기] <밝기>:
+    .adjust-underlay-option = __ocs_arg_kind__ 언더레이 옵션 입력 [페이드/대비/흑백] <__ocs_arg_option__>:
+    .adjust-monochrome = 흑백? [예/아니요] <__ocs_arg_value__>:
+    .adjust-brightness-value = 밝기 값 입력 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = 대비 값 입력 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = 페이드 값 입력 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 값은 0에서 100 사이의 정수여야 합니다.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4742,13 +4753,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: 확장 데이터가 없습니다.
     .value-3d-orbit =3D 궤도
     .value-3d-orbit-drag-with-right-mouse-button = 3D 궤도: 마우스 오른쪽 버튼으로 드래그합니다.
-    .adjust-brightness-contrast-fade = ADJUST [밝기 / 대비 / 페이드]:
-    .adjust-brightness-0-100 = ADJUST 밝기 0-100:
-    .adjust-contrast-0-100 = ADJUST 대비 0-100:
-    .adjust-fade-0-100 = ADJUST 페이드 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: 먼저 래스터 이미지를 선택합니다.
-    .adjust-value-must-be-0-100 = ADJUST: 값은 0-100이어야 합니다.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_2__ 이미지의 __ocs_fmt_0__ = __ocs_fmt_1__.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE 새 값 [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 또는 1을 입력합니다.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE 새 값 [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = 언더레이 __ocs_fmt_0__: fade=__ocs_fmt_1__, 대비=__ocs_fmt_2__, on=__ocs_fmt_3__, 클립=__ocs_fmt_4__, 모노=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ 언더레이가 업데이트되었습니다.
-    .usage-adjust-brightness-contrast-fade-0-100 = 사용법: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 사용법: ANNOSCALE <ratio> 예: 1:50, 2:1 또는 요소
     .usage-draworder-f-front-b-back-a-above-handle = 사용법: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 사용법: HYPERLINK <url>(객체를 먼저 선택)

locales/lo-LA/opencadstudio.ftl

@@ -1153,7 +1153,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: ຕ້ອງການ Left, Top, ຫຼື Right.
     .isodraft-expected-on-or-off = ISODRAFT: ຕ້ອງການ On ຫຼື Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: ອົງປະກອບທີ່ເລືອກຢູ່ໃນເລເຢີທີ່ລັອກໄວ້.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: ບໍ່ມີຮູບພາບຣາສເຕີຖືກເລືອກ, ຫຼື ບໍ່ຮູ້ຈັກຄຸນສົມບັດ (ໃຊ້ BRIGHTNESS|CONTRAST|FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: ປ້ອນຈຳນວນຖ້ວນແຕ່ -4 ຫາ 4.
     .usage-datalink-path-to-csv = ວິທີໃຊ້: DATALINK <ເສັ້ນທາງໄຟລ໌-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: ບໍ່ພົບຕາຕະລາງທີ່ເຊື່ອມໂຍງ.
@@ -4008,6 +4007,18 @@ insert =
     .xref-attach-dwg = ແນບ DWG
     .xref-attach-image = ແນບຮູບພາບ
     .select-images = ເລືອກຮູບພາບ:
+    .adjust-select-image-or-underlay = ເລືອກຮູບພາບ ຫຼື ຊັ້ນຮອງ:
+    .adjust-select-pdf-underlay = ເລືອກຊັ້ນຮອງ PDF:
+    .adjust-select-dwf-underlay = ເລືອກຊັ້ນຮອງ DWF:
+    .adjust-select-dgn-underlay = ເລືອກຊັ້ນຮອງ DGN:
+    .adjust-mixed-underlays = *ຊຸດການເລືອກບໍ່ຖືກຕ້ອງ. ເລືອກສະເພາະຊັ້ນຮອງທີ່ມີປະເພດໄຟລ໌ດຽວກັນ.*
+    .adjust-image-option = ປ້ອນຕົວເລືອກຮູບພາບ [ຄວາມຄົມຊັດ/ຈາງ/ຄວາມສະຫວ່າງ] <ຄວາມສະຫວ່າງ>:
+    .adjust-underlay-option = ປ້ອນຕົວເລືອກຊັ້ນຮອງ __ocs_arg_kind__ [ຈາງ/ຄວາມຄົມຊັດ/ສີຂາວດຳ] <__ocs_arg_option__>:
+    .adjust-monochrome = ສີຂາວດຳ? [ແມ່ນ/ບໍ່] <__ocs_arg_value__>:
+    .adjust-brightness-value = ປ້ອນຄ່າ ຄວາມສະຫວ່າງ (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = ປ້ອນຄ່າ ຄວາມຄົມຊັດ (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = ປ້ອນຄ່າ ຈາງ (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = ຄ່າຕ້ອງເປັນຈໍານວນຖ້ວນລະຫວ່າງ 0 ຫາ 100.
     .transparency-mode-on = ປ້ອນໂໝດຄວາມໂປ່ງໃສ [ON/OFF] <ON>:
     .transparency-mode-off = ປ້ອນໂໝດຄວາມໂປ່ງໃສ [ON/OFF] <OFF>:
     .xref-attach-menu = ແນບ...
@@ -4736,13 +4747,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: ບໍ່ມີ xdata.
     .value-3d-orbit = ໝູນມຸມມອງ 3D (3D Orbit)
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: ລາກດ້ວຍປຸ່ມເມົາສ໌ຂວາ.
-    .adjust-brightness-contrast-fade = ADJUST  [ຄວາມສະຫວ່າງ / ຄວາມຄົມຊັດ / ຄວາມຈາງ]:
-    .adjust-brightness-0-100 = ADJUST  ຄວາມສະຫວ່າງ 0-100:
-    .adjust-contrast-0-100 = ADJUST  ຄວາມຄົມຊັດ 0-100:
-    .adjust-fade-0-100 = ADJUST  ຄວາມຈາງ 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: ເລືອກຮູບພາບແຣັສເຕີກ່ອນ.
-    .adjust-value-must-be-0-100 = ADJUST: ຄ່າຕ້ອງຢູ່ລະຫວ່າງ 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ ໃນ __ocs_fmt_2__ ຮູບພາບ.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  ຄ່າໃໝ່ [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: ປ້ອນ 0 ຫຼື 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  ຄ່າໃໝ່ [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = ຊັ້ນຮອງພື້ນ __ocs_fmt_0__: ຄວາມຈາງ=__ocs_fmt_1__, ຄວາມຄົມຊັດ=__ocs_fmt_2__, ເປີດ=__ocs_fmt_3__, ຕັດຂອບ=__ocs_fmt_4__, ຂາວດໍາ=__ocs_fmt_5__
     .updated-changed-underlay-s = ອັບເດດແລ້ວ __ocs_fmt_0__ ຊັ້ນຮອງພື້ນ.
-    .usage-adjust-brightness-contrast-fade-0-100 = ວິທີໃຊ້: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = ວິທີໃຊ້: ANNOSCALE <ອັດຕາສ່ວນ>  ເຊັ່ນ 1:50, 2:1, ຫຼື ຕົວຄູນ
     .usage-draworder-f-front-b-back-a-above-handle = ວິທີໃຊ້: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = ວິທີໃຊ້: HYPERLINK <url>   (ເລືອກວັດຖຸກ່ອນ)

locales/nl-NL/opencadstudio.ftl

@@ -1146,7 +1146,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: voer Left, Top of Right in.
     .isodraft-expected-on-or-off = ISODRAFT: voer On of Off in.
     .xdata-selected-entities-are-on-locked-layers = XDATA: geselecteerde objecten staan op vergrendelde lagen.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: geen rasterafbeeldingen geselecteerd of onbekende eigenschap (gebruik BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: voer een geheel getal van -4 tot en met 4 in.
     .usage-datalink-path-to-csv = Gebruik: DATALINK <pad-naar-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: geen gekoppelde tabellen gevonden.
@@ -3994,6 +3993,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Selecteer afbeelding of onderlegger:
+    .adjust-select-pdf-underlay = Selecteer PDF-onderlegger:
+    .adjust-select-dwf-underlay = Selecteer DWF-onderlegger:
+    .adjust-select-dgn-underlay = Selecteer DGN-onderlegger:
+    .adjust-mixed-underlays = *Ongeldige selectieset. Selecteer alleen onderleggers van hetzelfde bestandstype.*
+    .adjust-image-option = Voer afbeeldingsoptie in [Contrast/Transparantie/Helderheid] <Helderheid>:
+    .adjust-underlay-option = Voer __ocs_arg_kind__-onderleggeroptie in [Transparantie/Contrast/Monochroom] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochroom? [Ja/Nee] <__ocs_arg_value__>:
+    .adjust-brightness-value = Voer waarde voor helderheid in (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Voer waarde voor contrast in (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Voer waarde voor transparantie in (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = De waarde moet een geheel getal tussen 0 en 100 zijn.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4741,13 +4752,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: geen xdata.
     .value-3d-orbit = 3D-baan
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: sleep met de rechter muisknop.
-    .adjust-brightness-contrast-fade = ADJUST  [Helderheid / Contrast / Vervagen]:
-    .adjust-brightness-0-100 = ADJUST  helderheid 0-100:
-    .adjust-contrast-0-100 = ADJUST contrast 0-100:
-    .adjust-fade-0-100 = ADJUST  vervaging 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: selecteer eerst rasterafbeelding(s).
-    .adjust-value-must-be-0-100 = ADJUST: waarde moet 0-100 zijn.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ op __ocs_fmt_2__ image(s).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  nieuwe waarde [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: vul 0 of 1 in.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  nieuwe waarde [-4..4]:
@@ -4873,7 +4877,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Onderlaag __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Bijgewerkt __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Gebruik: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Gebruik: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Gebruik: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Gebruik: HYPERLINK <url>   (select objects first)

locales/pl-PL/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: wpisz Left, Top lub Right.
     .isodraft-expected-on-or-off = ISODRAFT: wpisz On lub Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: zaznaczone obiekty znajdują się na zablokowanych warstwach.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: brak zaznaczonych obrazów rastrowych lub nieznana właściwość (użyj BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: wpisz liczbę całkowitą od -4 do 4.
     .usage-datalink-path-to-csv = Użycie: DATALINK <ścieżka-do-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nie znaleziono połączonych tabel.
@@ -3995,6 +3994,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Wybierz obraz lub podkład:
+    .adjust-select-pdf-underlay = Wybierz podkład PDF:
+    .adjust-select-dwf-underlay = Wybierz podkład DWF:
+    .adjust-select-dgn-underlay = Wybierz podkład DGN:
+    .adjust-mixed-underlays = *Nieprawidłowy zbiór wskazań. Wybierz tylko podkłady tego samego typu pliku.*
+    .adjust-image-option = Podaj opcję obrazu [Kontrast/Zniknąć/Jasność] <Jasność>:
+    .adjust-underlay-option = Podaj opcję podkładu __ocs_arg_kind__ [Zniknąć/Kontrast/Monochromatyczny] <__ocs_arg_option__>:
+    .adjust-monochrome = Monochromatyczny? [Tak/Nie] <__ocs_arg_value__>:
+    .adjust-brightness-value = Podaj wartość: jasność (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Podaj wartość: kontrast (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Podaj wartość: zniknąć (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Wartość musi być liczbą całkowitą z zakresu od 0 do 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4742,13 +4753,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: brak xdata.
     .value-3d-orbit =Orbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Orbita 3D: przeciągnij prawym przyciskiem myszy.
-    .adjust-brightness-contrast-fade = ADJUST [Jasność / Kontrast / Zanik]:
-    .adjust-brightness-0-100 = ADJUST jasność 0-100:
-    .adjust-contrast-0-100 = ADJUST kontrast 0-100:
-    .adjust-fade-0-100 = ADJUST zanikanie 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: najpierw wybierz obrazy rastrowe.
-    .adjust-value-must-be-0-100 = ADJUST: wartość musi wynosić 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ na obrazach __ocs_fmt_2__.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE nowa wartość [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: wprowadź 0 lub 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE nowa wartość [-4..4]:
@@ -4874,7 +4878,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Podkład __ocs_fmt_0__: fade=__ocs_fmt_1__, kontrast=__ocs_fmt_2__, on=__ocs_fmt_3__, klip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Zaktualizowano podkładki __ocs_fmt_0__.
-    .usage-adjust-brightness-contrast-fade-0-100 = Zastosowanie: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Zastosowanie: ANNOSCALE <ratio> np. 1:50, 2:1 lub współczynnik
     .usage-draworder-f-front-b-back-a-above-handle = Zastosowanie: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Sposób użycia: HYPERLINK <url> (najpierw wybierz obiekty)

locales/pt-BR/opencadstudio.ftl

@@ -1148,7 +1148,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: digite Left, Top ou Right.
     .isodraft-expected-on-or-off = ISODRAFT: digite On ou Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: as entidades selecionadas estão em camadas bloqueadas.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: nenhuma imagem raster selecionada ou propriedade desconhecida (use BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: digite um inteiro de -4 a 4.
     .usage-datalink-path-to-csv = Uso: DATALINK <caminho-do-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: nenhuma tabela vinculada encontrada.
@@ -3997,6 +3996,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Selecione uma imagem ou referência subjacente:
+    .adjust-select-pdf-underlay = Selecione uma referência subjacente PDF:
+    .adjust-select-dwf-underlay = Selecione uma referência subjacente DWF:
+    .adjust-select-dgn-underlay = Selecione uma referência subjacente DGN:
+    .adjust-mixed-underlays = *Conjunto de seleção inválido. Selecione apenas referências subjacentes do mesmo tipo de arquivo.*
+    .adjust-image-option = Insira a opção de imagem [Contraste/Esmaecimento/Brilho] <Brilho>:
+    .adjust-underlay-option = Insira a opção de referência subjacente __ocs_arg_kind__ [Esmaecimento/Contraste/Monocromático] <__ocs_arg_option__>:
+    .adjust-monochrome = Monocromático? [Sim/Não] <__ocs_arg_value__>:
+    .adjust-brightness-value = Insira o valor de brilho (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Insira o valor de contraste (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Insira o valor de esmaecimento (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = O valor deve ser um número inteiro entre 0 e 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4743,13 +4754,6 @@ view =
     .x-no-xdata =   __ocs_fmt_0__: sem dados estendidos.
     .value-3d-orbit = Órbita 3D
     .value-3d-orbit-drag-with-right-mouse-button = Órbita 3D: arraste com o botão direito do mouse.
-    .adjust-brightness-contrast-fade = ADJUST  [Brilho / Contraste / Esmaecimento]:
-    .adjust-brightness-0-100 = ADJUST  brilho 0-100:
-    .adjust-contrast-0-100 = ADJUST  contraste 0-100:
-    .adjust-fade-0-100 = ADJUST  esmaecimento 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: selecione primeiro as imagens raster.
-    .adjust-value-must-be-0-100 = ADJUST: o valor deve estar entre 0 e 100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ em __ocs_fmt_2__ imagens.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  novo valor [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: insira 0 ou 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  novo valor [-4..4]:
@@ -4875,7 +4879,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Subjacência __ocs_fmt_0__: esmaecimento=__ocs_fmt_1__, contraste=__ocs_fmt_2__, ligada=__ocs_fmt_3__, delimitada=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ subjacências atualizadas.
-    .usage-adjust-brightness-contrast-fade-0-100 = Uso: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Uso: ANNOSCALE <proporção> por exemplo, 1:50, 2:1 ou um fator
     .usage-draworder-f-front-b-back-a-above-handle = Uso: DRAWORDER F|FRONT | B|BACK | A|ABOVE <identificador> | U|UNDER <identificador>
     .usage-hyperlink-url-select-objects-first = Uso: HYPERLINK <url> (selecione primeiro os objetos)

locales/ru-RU/opencadstudio.ftl

@@ -1151,7 +1151,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: введите Left, Top или Right.
     .isodraft-expected-on-or-off = ISODRAFT: введите On или Off.
     .xdata-selected-entities-are-on-locked-layers = XDATA: выбранные объекты находятся на заблокированных слоях.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: растровые изображения не выбраны или свойство неизвестно (используйте BRIGHTNESS/CONTRAST/FADE).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: введите целое число от -4 до 4.
     .usage-datalink-path-to-csv = Использование: DATALINK <путь-к-.csv>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: связанные таблицы не найдены.
@@ -3997,6 +3996,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = Выберите изображение или подложку:
+    .adjust-select-pdf-underlay = Выберите подложку PDF:
+    .adjust-select-dwf-underlay = Выберите подложку DWF:
+    .adjust-select-dgn-underlay = Выберите подложку DGN:
+    .adjust-mixed-underlays = *Недопустимый набор. Выберите только подложки одного типа файлов.*
+    .adjust-image-option = Введите параметр изображения [контраст/Угасание/Яркость] <Яркость>:
+    .adjust-underlay-option = Введите параметр подложки __ocs_arg_kind__ [Угасание/контраст/Монохромный] <__ocs_arg_option__>:
+    .adjust-monochrome = Монохромный? [Да/Нет] <__ocs_arg_value__>:
+    .adjust-brightness-value = Введите значение: яркость (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Введите значение: контраст (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Введите значение: угасание (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Значение должно быть целым числом от 0 до 100.
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4744,13 +4755,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: нет данных.
     .value-3d-orbit = 3D орбитальная
     .value-3d-orbit-drag-with-right-mouse-button = 3D Orbit: перетащите правой кнопкой мыши.
-    .adjust-brightness-contrast-fade = ADJUST  [Яркость / Контраст / Фаде]:
-    .adjust-brightness-0-100 = ADJUST  яркость 0-100:
-    .adjust-contrast-0-100 = ADJUST  Контраст 0-100:
-    .adjust-fade-0-100 = ADJUST  выцветание 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: сначала выберите растровое изображение(и).
-    .adjust-value-must-be-0-100 = ADJUST: значение должно быть 0-100.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__ = __ocs_fmt_1__ на __ocs_fmt_2__ изображении(ах).
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  новое значение [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: введите 0 или 1.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  новое значение [-4..4]:
@@ -4876,7 +4880,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Подложка __ocs_fmt_0__: fade=__ocs_fmt_1__, contrast=__ocs_fmt_2__, on=__ocs_fmt_3__, clip=__ocs_fmt_4__, mono=__ocs_fmt_5__
     .updated-changed-underlay-s = Обновлено __ocs_fmt_0__ underlay(s).
-    .usage-adjust-brightness-contrast-fade-0-100 = Использование: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Использование: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = Использование: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Использование: HYPERLINK <url>   (select objects first)

locales/tr-TR/opencadstudio.ftl

@@ -1134,7 +1134,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE: Left, Top veya Right girin.
     .isodraft-expected-on-or-off = ISODRAFT: On veya Off girin.
     .xdata-selected-entities-are-on-locked-layers = XDATA: seçilen nesneler kilitli katmanlarda.
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST: raster görüntü seçilmedi veya özellik bilinmiyor (BRIGHTNESS/CONTRAST/FADE kullanın).
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE: -4 ile 4 arasında bir tamsayı girin.
     .usage-datalink-path-to-csv = Kullanım: DATALINK <.csv-dosya-yolu>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE: bağlantılı tablo bulunamadı.
@@ -3962,6 +3961,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Görüntüleri seçin:
+    .adjust-select-image-or-underlay = Görüntü veya altlık seçin:
+    .adjust-select-pdf-underlay = PDF altlığı seçin:
+    .adjust-select-dwf-underlay = DWF altlığı seçin:
+    .adjust-select-dgn-underlay = DGN altlığı seçin:
+    .adjust-mixed-underlays = *Geçersiz seçim kümesi. Yalnız aynı dosya türündeki altlık nesnelerini seçin.*
+    .adjust-image-option = Görüntü seçeneğini girin [Karşıtlık/Solukluk/Parlaklık] <Parlaklık>:
+    .adjust-underlay-option = __ocs_arg_kind__ altlık seçeneğini girin [Solukluk/Karşıtlık/Tek Renkli] <__ocs_arg_option__>:
+    .adjust-monochrome = Tek Renkli? [Evet/Hayır] <__ocs_arg_value__>:
+    .adjust-brightness-value = Parlaklık değerini girin (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = Karşıtlık değerini girin (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = Solukluk değerini girin (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = Değer 0 ile 100 arasında bir tam sayı olmalıdır.
     .transparency-mode-on = Saydamlık modunu girin [ON/OFF] <ON>:
     .transparency-mode-off = Saydamlık modunu girin [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4694,13 +4705,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__: xdata yok.
     .value-3d-orbit = 3B Yörünge
     .value-3d-orbit-drag-with-right-mouse-button = 3B Yörünge: sağ fare düğmesiyle sürükleyin.
-    .adjust-brightness-contrast-fade = ADJUST  [Parlaklık / Karşıtlık / Solma]:
-    .adjust-brightness-0-100 = ADJUST  Parlaklık 0-100:
-    .adjust-contrast-0-100 = ADJUST  Karşıtlık 0-100:
-    .adjust-fade-0-100 = ADJUST  Solma 0-100:
-    .adjust-select-raster-image-s-first = ADJUST: önce raster görüntüleri seçin.
-    .adjust-value-must-be-0-100 = ADJUST: değer 0 ile 100 arasında olmalıdır.
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_2__ görüntüde __ocs_fmt_0__ = __ocs_fmt_1__ olarak değiştirildi.
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE  Yeni değer [0/1]:
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 0 veya 1 girin.
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE  Yeni değer [-4..4]:
@@ -4820,7 +4824,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__ = __ocs_fmt_1__
     .underlay-x-fade-contrast-on-clip-mono = Altlık __ocs_fmt_0__: solukluk=__ocs_fmt_1__, karşıtlık=__ocs_fmt_2__, açık=__ocs_fmt_3__, kırp=__ocs_fmt_4__, tek renk=__ocs_fmt_5__
     .updated-changed-underlay-s = __ocs_fmt_0__ altlık güncellendi.
-    .usage-adjust-brightness-contrast-fade-0-100 = Kullanım: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = Kullanım: ANNOSCALE <ratio> ör. 1:50, 2:1 veya bir katsayı
     .usage-draworder-f-front-b-back-a-above-handle = Kullanım: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = Kullanım: HYPERLINK <url> (önce nesneleri seçin)

locales/zh-CN/opencadstudio.ftl

@@ -1135,7 +1135,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE：请输入 Left、Top 或 Right。
     .isodraft-expected-on-or-off = ISODRAFT：请输入 On 或 Off。
     .xdata-selected-entities-are-on-locked-layers = XDATA：选定实体位于锁定的图层上。
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST：未选择光栅图像或属性未知（使用 BRIGHTNESS/CONTRAST/FADE）。
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE：请输入 -4 到 4 之间的整数。
     .usage-datalink-path-to-csv = 用法：DATALINK <.csv文件路径>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE：未找到链接表格。
@@ -3979,6 +3978,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = 选择图像或参考底图:
+    .adjust-select-pdf-underlay = 选择 PDF 参考底图:
+    .adjust-select-dwf-underlay = 选择 DWF 参考底图:
+    .adjust-select-dgn-underlay = 选择 DGN 参考底图:
+    .adjust-mixed-underlays = *选择集无效。请仅选择相同文件类型的参考底图。*
+    .adjust-image-option = 输入图像选项 [对比度/变暗/亮度] <亮度>:
+    .adjust-underlay-option = 输入 __ocs_arg_kind__ 参考底图选项 [变暗/对比度/单色] <__ocs_arg_option__>:
+    .adjust-monochrome = 单色? [是/否] <__ocs_arg_value__>:
+    .adjust-brightness-value = 输入亮度值 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = 输入对比度值 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = 输入变暗值 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 值必须是介于 0 和 100 之间的整数。
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4726,13 +4737,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__:无xdata.
     .value-3d-orbit = 三维动态观察
     .value-3d-orbit-drag-with-right-mouse-button = 三维轨道:用鼠标右键拖动.
-    .adjust-brightness-contrast-fade = ADJUST  [光亮/对比/淡:
-    .adjust-brightness-0-100 = ADJUST  亮度 0-100 :
-    .adjust-contrast-0-100 = ADJUST  对比 0-100 :
-    .adjust-fade-0-100 = ADJUST  淡出 0- 100 :
-    .adjust-select-raster-image-s-first = ADJUST:先选择光栅图像。
-    .adjust-value-must-be-0-100 = ADJUST:值必须是0-100。
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__= __ocs_fmt_1__在__ocs_fmt_2__图像上。
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE 新值 [0/1]：
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 输入 0 或 1 。
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE 新值 [-4..4]：
@@ -4858,7 +4862,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__=__ocs_fmt_1__(简体中文)
     .underlay-x-fade-contrast-on-clip-mono = 内饰 __ocs_fmt_0__: 淡出=( 淡出=)__ocs_fmt_1__,对比=__ocs_fmt_2__打开=__ocs_fmt_3__,夹=__ocs_fmt_4__单数=__ocs_fmt_5__
     .updated-changed-underlay-s = 已更新 __ocs_fmt_0__ 内置 。
-    .usage-adjust-brightness-contrast-fade-0-100 = 用法： ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 用法： ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = 用法： DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 用法： HYPERLINK <url>   (select objects first)

locales/zh-TW/opencadstudio.ftl

@@ -1147,7 +1147,6 @@ common =
     .isoplane-expected-left-top-or-right = ISOPLANE：請輸入 Left、Top 或 Right。
     .isodraft-expected-on-or-off = ISODRAFT：請輸入 On 或 Off。
     .xdata-selected-entities-are-on-locked-layers = XDATA：選取的實體位於鎖定的圖層上。
-    .adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade = ADJUST：未選取點陣影像或屬性不明（使用 BRIGHTNESS/CONTRAST/FADE）。
     .annoautoscale-enter-an-integer-from-4-through-4 = ANNOAUTOSCALE：請輸入 -4 到 4 之間的整數。
     .usage-datalink-path-to-csv = 用法：DATALINK <.csv檔案路徑>
     .datalinkupdate-no-linked-tables-found = DATALINKUPDATE：找不到連結的表格。
@@ -3991,6 +3990,18 @@ insert =
     .xref-attach-dwg = Attach DWG
     .xref-attach-image = Attach Image
     .select-images = Select image(s):
+    .adjust-select-image-or-underlay = 選取影像或參考底圖:
+    .adjust-select-pdf-underlay = 選取 PDF 參考底圖:
+    .adjust-select-dwf-underlay = 選取 DWF 參考底圖:
+    .adjust-select-dgn-underlay = 選取 DGN 參考底圖:
+    .adjust-mixed-underlays = *選取集無效。請只選取相同檔案類型的參考底圖。*
+    .adjust-image-option = 輸入影像選項 [對比度/變暗/亮度] <亮度>:
+    .adjust-underlay-option = 輸入 __ocs_arg_kind__ 參考底圖選項 [變暗/對比度/單色] <__ocs_arg_option__>:
+    .adjust-monochrome = 單色? [是/否] <__ocs_arg_value__>:
+    .adjust-brightness-value = 輸入亮度值 (0-100) <__ocs_arg_value__>:
+    .adjust-contrast-value = 輸入對比度值 (0-100) <__ocs_arg_value__>:
+    .adjust-fade-value = 輸入變暗值 (0-100) <__ocs_arg_value__>:
+    .adjust-value-integer-0-100 = 值必須是介於 0 和 100 之間的整數。
     .transparency-mode-on = Enter transparency mode [ON/OFF] <ON>:
     .transparency-mode-off = Enter transparency mode [ON/OFF] <OFF>:
     .xref-attach-menu = Attach...
@@ -4738,13 +4749,6 @@ view =
     .x-no-xdata = __ocs_fmt_0__:無xdata.
     .value-3d-orbit = 三維動態觀察
     .value-3d-orbit-drag-with-right-mouse-button = 三維軌道:用滑鼠右鍵拖動.
-    .adjust-brightness-contrast-fade = ADJUST  [光亮/對比/淡:
-    .adjust-brightness-0-100 = ADJUST  亮度 0-100 :
-    .adjust-contrast-0-100 = ADJUST  對比 0-100 :
-    .adjust-fade-0-100 = ADJUST  淡出 0- 100 :
-    .adjust-select-raster-image-s-first = ADJUST:先選擇光柵圖像。
-    .adjust-value-must-be-0-100 = ADJUST:值必須是0-100。
-    .adjust-action-v-on-changed-image-s = ADJUST: __ocs_fmt_0__= __ocs_fmt_1__在__ocs_fmt_2__圖像上。
     .annoallvisible-new-value-0-1 = ANNOALLVISIBLE 新值 [0/1]：
     .annoallvisible-enter-0-or-1 = ANNOALLVISIBLE: 輸入 0 或 1 。
     .annoautoscale-new-value-4-4 = ANNOAUTOSCALE 新值 [-4..4]：
@@ -4870,7 +4874,6 @@ view =
     .userr-n-val = USERR__ocs_fmt_0__=__ocs_fmt_1__(簡體中文)
     .underlay-x-fade-contrast-on-clip-mono = 內飾 __ocs_fmt_0__: 淡出=( 淡出=)__ocs_fmt_1__,對比=__ocs_fmt_2__開啟=__ocs_fmt_3__,夾=__ocs_fmt_4__單數=__ocs_fmt_5__
     .updated-changed-underlay-s = 已更新 __ocs_fmt_0__ 內置 。
-    .usage-adjust-brightness-contrast-fade-0-100 = 用法： ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
     .usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor = 用法： ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor
     .usage-draworder-f-front-b-back-a-above-handle = 用法： DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>
     .usage-hyperlink-url-select-objects-first = 用法： HYPERLINK <url>   (select objects first)

src/app/command_driver/utilities.rs

@@ -507,6 +507,32 @@ impl OpenCADStudio {
         StepInput::SelectionComplete(kept)
     }
 
+    /// Keeps only the kinds of object the active command takes, dropping
+    /// the rest of a completed selection silently.
+    fn filter_command_entity_selection(&mut self, input: StepInput) -> StepInput {
+        let StepInput::SelectionComplete(handles) = input else {
+            return input;
+        };
+        let i = self.active_tab;
+        let Some(keep) = self.tabs[i]
+            .active_cmd
+            .as_ref()
+            .and_then(|command| command.selection_entity_filter())
+        else {
+            return StepInput::SelectionComplete(handles);
+        };
+        let (kept, dropped): (Vec<Handle>, Vec<Handle>) = handles
+            .into_iter()
+            .partition(|h| self.tabs[i].scene.document.get_entity(*h).is_some_and(keep));
+        for handle in &dropped {
+            self.tabs[i].scene.deselect_entity(*handle);
+        }
+        if !dropped.is_empty() {
+            self.refresh_properties();
+        }
+        StepInput::SelectionComplete(kept)
+    }
+
     /// Drops locked point clouds from a completed selection when the active
     /// command would move them, saying which were locked and how many went.
     fn filter_locked_point_cloud_selection(&mut self, input: StepInput) -> StepInput {
@@ -562,6 +588,7 @@ impl OpenCADStudio {
         let input = self.filter_associative_dimension_selection(input);
         let input = self.filter_block_reference_selection(input);
         let input = self.filter_locked_point_cloud_selection(input);
+        let input = self.filter_command_entity_selection(input);
         // XCLIP / CLIP learn which chosen references carry a clip already.
         {
             let i = self.active_tab;

src/app/commands/display.rs

@@ -1391,101 +1391,120 @@ impl OpenCADStudio {
                 return Some(Task::none());
             }
 
-            // ADJUST — set brightness / contrast / fade on selected raster images
-            //   ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>
-            "ADJUST" => {
-                use crate::command::SelectThenKeywordCommand;
-                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
-                let c = SelectThenKeywordCommand::new(
-                    "ADJUST",
-                    "ADJUST  [Brightness / Contrast / Fade]:",
-                    vec![
-                        (
-                            "Brightness",
-                            "BRIGHTNESS",
-                            Some("ADJUST  brightness 0-100:"),
-                        ),
-                        ("Contrast", "CONTRAST", Some("ADJUST  contrast 0-100:")),
-                        ("Fade", "FADE", Some("ADJUST  fade 0-100:")),
-                    ],
-                    has_sel,
-                );
-                self.command_line.push_info(&c.prompt());
-                self.tabs[i].active_cmd = Some(Box::new(c));
-            }
-            cmd if cmd.starts_with("ADJUST ") => {
-                let rest = cmd.trim_start_matches("ADJUST").trim();
-                let parts: Vec<&str> = rest.splitn(2, char::is_whitespace).collect();
-                let action = parts.first().map(|s| s.to_uppercase()).unwrap_or_default();
-                let arg = parts.get(1).copied().unwrap_or("").trim();
-                let handles: Vec<codec::Handle> = self.tabs[i]
+            // ADJUST / -IMAGEADJUST / PDFADJUST / DWFADJUST / DGNADJUST:
+            // chosen images or underlays (pickfirst first), then the option
+            // and the value.
+            "ADJUST" | "-IMAGEADJUST" | "PDFADJUST" | "DWFADJUST" | "DGNADJUST" => {
+                let mode = match cmd {
+                    "-IMAGEADJUST" => "I",
+                    "PDFADJUST" => "P",
+                    "DWFADJUST" => "W",
+                    "DGNADJUST" => "G",
+                    _ => "A",
+                };
+                let keep = crate::modules::insert::xadjust::keeps(mode);
+                let chosen: Vec<codec::Handle> = self.tabs[i]
                     .scene
                     .selected_entities()
-                    .iter()
-                    .map(|(h, _)| *h)
-                    .filter(|handle| !self.tabs[i].scene.is_layer_locked(*handle))
+                    .into_iter()
+                    .filter(|(_, e)| keep(e))
+                    .map(|(h, _)| h)
                     .collect();
-                if handles.is_empty() {
-                    self.command_line
-                        .push_error(crate::t!("ADJUST: select raster image(s) first.").as_ref());
-                } else if action.is_empty() {
-                    self.command_line.push_info(
-                        crate::t!("Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>").as_ref(),
-                    );
-                } else if let Ok(v) = arg.parse::<u8>() {
-                    let v = v.min(100);
-                    self.push_undo_snapshot(i, "ADJUST");
-                    let mut changed = 0usize;
-                    let mut changed_handles = Vec::new();
-                    for h in &handles {
-                        if let Some(codec::EntityType::RasterImage(img)) = self.tabs[i]
-                            .scene
-                            .document
-                            .entities_mut()
-                            .find(|e| e.common().handle == *h)
-                        {
-                            match action.as_str() {
-                                "BRIGHTNESS" => {
-                                    img.brightness = v;
-                                    changed += 1;
-                                    changed_handles.push(*h);
-                                }
-                                "CONTRAST" => {
-                                    img.contrast = v;
-                                    changed += 1;
-                                    changed_handles.push(*h);
-                                }
-                                "FADE" => {
-                                    img.fade = v;
-                                    changed += 1;
-                                    changed_handles.push(*h);
-                                }
-                                _ => {}
-                            }
-                        }
-                    }
-                    if changed > 0 {
-                        self.tabs[i].dirty = true;
-                        for &handle in &changed_handles {
-                            self.tabs[i].scene.reseed_derived_caches(handle);
-                        }
-                        let changes: Vec<_> = changed_handles
-                            .into_iter()
-                            .map(|handle| (handle, crate::scene::ChangeKind::Modified))
-                            .collect();
-                        self.tabs[i].scene.bump_entities(&changes);
-                        self.command_line.push_output(
-                            crate::tf!("ADJUST: {action} = {v} on {changed} image(s).").as_ref(),
-                        );
-                    } else {
-                        self.command_line.push_error(
-                            crate::t!("ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE).").as_ref(),
-                        );
-                    }
-                } else {
-                    self.command_line
-                        .push_error(crate::t!("ADJUST: value must be 0-100.").as_ref());
+                if !chosen.is_empty() {
+                    self.tabs[i]
+                        .scene
+                        .replace_selection(chosen.into_iter().collect());
+                    return Some(self.dispatch_command(&format!("_ADJUSTSEL {mode}")));
                 }
+                self.start_adjust_selection(i, cmd, mode);
+            }
+            // The gathered objects: one kind at a time, then the option.
+            c if c.starts_with("_ADJUSTSEL ") => {
+                use crate::command::CadCommand;
+                use crate::modules::insert::xadjust::{self, AdjustCommand};
+                let mode = c["_ADJUSTSEL ".len()..].trim().to_string();
+                let keep = xadjust::keeps(&mode);
+                let name = xadjust::command_name(&mode);
+                let objects: Vec<(codec::Handle, codec::EntityType)> = self.tabs[i]
+                    .scene
+                    .selected_entities()
+                    .into_iter()
+                    .filter(|(h, e)| keep(e) && !self.tabs[i].scene.is_layer_locked(*h))
+                    .map(|(h, e)| (h, e.clone()))
+                    .collect();
+                match AdjustCommand::for_objects(&objects) {
+                    None => {}
+                    Some(Err(message)) => {
+                        self.command_line.push_error(crate::t!(message).as_ref());
+                        self.start_adjust_selection(i, name, &mode);
+                    }
+                    Some(Ok(command)) => {
+                        self.command_line.push_info(&command.prompt());
+                        self.command_line.set_step_options(command.options());
+                        self.tabs[i].active_cmd = Some(Box::new(command));
+                    }
+                }
+                // Repeating runs the command, not this step.
+                return Some(self.finish_dispatch(name));
+            }
+            // `_ADJUSTAPPLY <BRIGHTNESS|CONTRAST|FADE|MONOCHROME> <value> <handles…>`
+            // writes the value to every listed image or underlay, one undo step.
+            c if c.starts_with("_ADJUSTAPPLY ") => {
+                let mut parts = c.split_whitespace().skip(1);
+                let prop = parts.next().unwrap_or("").to_string();
+                let value: u8 = parts.next().and_then(|v| v.parse().ok()).unwrap_or(0);
+                let handles: Vec<codec::Handle> = parts
+                    .filter_map(|h| u64::from_str_radix(h, 16).ok())
+                    .map(codec::Handle::new)
+                    .collect();
+                self.push_undo_snapshot(i, "ADJUST");
+                let mut changed = Vec::new();
+                for h in &handles {
+                    let done = match self.tabs[i].scene.document.get_entity_mut(*h) {
+                        Some(codec::EntityType::RasterImage(img)) => match prop.as_str() {
+                            "BRIGHTNESS" => {
+                                img.brightness = value;
+                                true
+                            }
+                            "CONTRAST" => {
+                                img.contrast = value;
+                                true
+                            }
+                            "FADE" => {
+                                img.fade = value;
+                                true
+                            }
+                            _ => false,
+                        },
+                        Some(codec::EntityType::Underlay(u)) => match prop.as_str() {
+                            "CONTRAST" => {
+                                u.set_contrast(value);
+                                true
+                            }
+                            "FADE" => {
+                                u.set_fade(value);
+                                true
+                            }
+                            "MONOCHROME" => {
+                                u.set_monochrome(value != 0);
+                                true
+                            }
+                            _ => false,
+                        },
+                        _ => false,
+                    };
+                    if done {
+                        self.tabs[i].scene.reseed_derived_caches(*h);
+                        changed.push((*h, crate::scene::ChangeKind::Modified));
+                    }
+                }
+                if !changed.is_empty() {
+                    self.tabs[i].scene.bump_entities(&changed);
+                    self.tabs[i].dirty = true;
+                }
+                // The command used the set up; nothing stays chosen.
+                self.tabs[i].scene.deselect_all();
+                self.refresh_properties();
             }
 
             // ANNOSCALE / CANNOSCALE <ratio> — set the current annotation scale
@@ -2216,6 +2235,26 @@ pub(crate) fn table_to_csv(table: &codec::entities::Table) -> String {
         .join("\r\n")
 }
 
+impl OpenCADStudio {
+    /// The ADJUST family's object prompt, keeping only the kinds `mode`
+    /// takes (see `xadjust::keeps`).
+    fn start_adjust_selection(&mut self, i: usize, name: &str, mode: &str) {
+        use crate::command::CadCommand;
+        use crate::modules::insert::xadjust;
+        self.tabs[i].scene.deselect_all();
+        self.refresh_properties();
+        let command = crate::modules::draw::select::SelectObjectsCommand::filtered(
+            name,
+            &format!("_ADJUSTSEL {mode}"),
+            xadjust::select_prompt(mode),
+            xadjust::keeps(mode),
+        );
+        self.command_line.push_info(&command.prompt());
+        self.command_line.set_step_options(command.options());
+        self.tabs[i].active_cmd = Some(Box::new(command));
+    }
+}
+
 #[cfg(test)]
 mod tests {
     use crate::app::OpenCADStudio;

src/app/update/command.rs

@@ -3911,7 +3911,9 @@ impl OpenCADStudio {
                         return Task::none();
                     }
                 }
-                if field.starts_with("ul_") {
+                if field.starts_with("ul_")
+                    || matches!(field, "ri_bright" | "ri_contrast" | "ri_fade")
+                {
                     if let Err(message) = crate::entities::underlay::validate_property(field, &val)
                     {
                         self.command_line.push_error(message);

src/command.rs

@@ -2983,6 +2983,12 @@ pub trait CadCommand: Send {
         false
     }
 
+    /// The kinds of object the command takes (ADJUST): the host drops the
+    /// rest of each completed selection without a word.
+    fn selection_entity_filter(&self) -> Option<fn(&EntityType) -> bool> {
+        None
+    }
+
     /// The command takes block references only (XCLIP): the host drops the
     /// rest and says how many were ineligible.
     fn selection_keeps_block_references(&self) -> bool {

src/entities/raster_image.rs

@@ -333,7 +333,20 @@ impl PropertyEditable for RasterImage {
             .contains(codec::entities::ImageDisplayFlags::USE_CLIPPING_BOUNDARY);
         let clip_inverted = self.clip_boundary.clip_mode == codec::entities::ClipMode::Inside;
         let transparency = self.common.transparency.to_string();
+        let whole = |label: &str, field: &'static str, value: u8| Property {
+            label: t!(label).into_owned(),
+            field,
+            value: PropValue::EditText(value.to_string()),
+        };
         vec![
+            PropSection {
+                title: t!("Image Adjust").into_owned(),
+                props: vec![
+                    whole("Brightness", "ri_bright", self.brightness),
+                    whole("Contrast", "ri_contrast", self.contrast),
+                    whole("Fade", "ri_fade", self.fade),
+                ],
+            },
             PropSection {
                 title: t!("Geometry").into_owned(),
                 props: vec![
@@ -362,13 +375,6 @@ impl PropertyEditable for RasterImage {
                 title: t!("Misc").into_owned(),
                 props: vec![
                     ro(t!("Name").as_ref(), "ri_name", self.file_name().to_string()),
-                    edit(
-                        t!("Brightness").as_ref(),
-                        "ri_bright",
-                        self.brightness as f64,
-                    ),
-                    edit(t!("Contrast").as_ref(), "ri_contrast", self.contrast as f64),
-                    edit(t!("Fade").as_ref(), "ri_fade", self.fade as f64),
                     ro(t!("Transparency").as_ref(), "ri_transparency", transparency),
                     Property {
                         label: t!("Show image").into_owned(),
@@ -449,9 +455,10 @@ impl PropertyEditable for RasterImage {
             "ri_ox" => self.insertion_point.x = v,
             "ri_oy" => self.insertion_point.y = v,
             "ri_oz" => self.insertion_point.z = v,
-            "ri_bright" => self.brightness = v.clamp(0.0, 100.0) as u8,
-            "ri_contrast" => self.contrast = v.clamp(0.0, 100.0) as u8,
-            "ri_fade" => self.fade = v.clamp(0.0, 100.0) as u8,
+            // Out-of-range values are refused before they get here.
+            "ri_bright" if (0.0..=100.0).contains(&v) => self.brightness = v as u8,
+            "ri_contrast" if (0.0..=100.0).contains(&v) => self.contrast = v as u8,
+            "ri_fade" if (0.0..=100.0).contains(&v) => self.fade = v as u8,
             _ => {}
         }
     }

src/entities/underlay.rs

@@ -227,7 +227,8 @@ fn parse_flag(value: &str, current: bool) -> bool {
 pub(crate) fn validate_property(field: &str, value: &str) -> Result<(), &'static str> {
     let number = || value.trim().parse::<f64>().ok();
     match field {
-        "ul_contrast" | "ul_fade" => match number() {
+        // A raster image's Image Adjust rows take the same range.
+        "ul_contrast" | "ul_fade" | "ri_bright" | "ri_contrast" | "ri_fade" => match number() {
             Some(v) if (0.0..=100.0).contains(&v) && v.fract() == 0.0 => Ok(()),
             _ => Err("Value must be an integer between 0 and 100"),
         },

src/locale_catalog.rs

@@ -557,13 +557,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "ACI:" => Some(("styles", "aci")),
         "ADDSELECTED: creating a new {kind} is not supported." => Some(("inquiry", "addselected-creating-a-new-kind-is-not-support")),
         "ADDSELECTED: selected object not found." => Some(("inquiry", "addselected-selected-object-not-found")),
-        "ADJUST  [Brightness / Contrast / Fade]:" => Some(("view", "adjust-brightness-contrast-fade")),
-        "ADJUST  brightness 0-100:" => Some(("view", "adjust-brightness-0-100")),
-        "ADJUST  contrast 0-100:" => Some(("view", "adjust-contrast-0-100")),
-        "ADJUST  fade 0-100:" => Some(("view", "adjust-fade-0-100")),
-        "ADJUST: select raster image(s) first." => Some(("view", "adjust-select-raster-image-s-first")),
-        "ADJUST: value must be 0-100." => Some(("view", "adjust-value-must-be-0-100")),
-        "ADJUST: {action} = {v} on {changed} image(s)." => Some(("view", "adjust-action-v-on-changed-image-s")),
         "ALIGN  Scale objects based on alignment points? [Y/N]:" => Some(("modify", "align-scale-objects-based-on-alignment-points")),
         "ALIGN  Select objects (%{count} selected, Enter when done):" => Some(("modify", "align-select-objects-count-selected-enter-when")),
         "ALIGN  Specify 1st destination point:" => Some(("modify", "align-specify-1st-destination-point")),
@@ -3526,7 +3519,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Updated {changed} underlay(s)." => Some(("view", "updated-changed-underlay-s")),
         "Upper" => Some(("annotate", "upper")),
         "Upside down" => Some(("common", "upside-down")),
-        "Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>" => Some(("view", "usage-adjust-brightness-contrast-fade-0-100")),
         "Usage: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor" => Some(("view", "usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor")),
         "Usage: ATTDISP ON | OFF | NORMAL" => Some(("draw", "usage-attdisp-on-off-normal")),
         "Usage: ATTSYNC <block name>.  Blocks: {}" => Some(("insert", "usage-attsync-block-name-blocks")),
@@ -3837,6 +3829,18 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "Attach DWG" => Some(("insert", "xref-attach-dwg")),
         "Attach Image" => Some(("insert", "xref-attach-image")),
         "Select image(s):" => Some(("insert", "select-images")),
+        "Select image or underlay:" => Some(("insert", "adjust-select-image-or-underlay")),
+        "Select PDF underlay:" => Some(("insert", "adjust-select-pdf-underlay")),
+        "Select DWF underlay:" => Some(("insert", "adjust-select-dwf-underlay")),
+        "Select DGN underlay:" => Some(("insert", "adjust-select-dgn-underlay")),
+        "*Invalid selection set. Select underlay objects of the same file type only.*" => Some(("insert", "adjust-mixed-underlays")),
+        "Enter image option [Contrast/Fade/Brightness] <Brightness>:" => Some(("insert", "adjust-image-option")),
+        "Enter %{kind} underlay option [Fade/Contrast/Monochrome] <%{option}>:" => Some(("insert", "adjust-underlay-option")),
+        "Monochrome? [Yes/No] <%{value}>:" => Some(("insert", "adjust-monochrome")),
+        "Enter brightness value (0-100) <%{value}>:" => Some(("insert", "adjust-brightness-value")),
+        "Enter contrast value (0-100) <%{value}>:" => Some(("insert", "adjust-contrast-value")),
+        "Enter fade value (0-100) <%{value}>:" => Some(("insert", "adjust-fade-value")),
+        "Value must be an integer between 0 and 100." => Some(("insert", "adjust-value-integer-0-100")),
         "Enter transparency mode [ON/OFF] <ON>:" => Some(("insert", "transparency-mode-on")),
         "Enter transparency mode [ON/OFF] <OFF>:" => Some(("insert", "transparency-mode-off")),
         "Attach..." => Some(("insert", "xref-attach-menu")),
@@ -4217,7 +4221,6 @@ pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static
         "ISOPLANE: expected Left, Top, or Right." => Some(("common", "isoplane-expected-left-top-or-right")),
         "ISODRAFT: expected On or Off." => Some(("common", "isodraft-expected-on-or-off")),
         "XDATA: selected entities are on locked layers." => Some(("common", "xdata-selected-entities-are-on-locked-layers")),
-        "ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE)." => Some(("common", "adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade")),
         "ANNOAUTOSCALE: enter an integer from -4 through 4." => Some(("common", "annoautoscale-enter-an-integer-from-4-through-4")),
         "Usage: DATALINK <path-to-.csv>" => Some(("common", "usage-datalink-path-to-csv")),
         "DATALINKUPDATE: no linked tables found." => Some(("common", "datalinkupdate-no-linked-tables-found")),

src/modules/draw/select.rs

@@ -41,6 +41,9 @@ pub struct SelectObjectsCommand {
     /// The command works on associative dimensions only; the host drops
     /// everything else from each completed selection.
     associative_dimensions_only: bool,
+    /// The kinds of object the command takes; the host drops the rest of
+    /// each completed selection silently, and Enter on nothing ends quietly.
+    keep: Option<fn(&codec::EntityType) -> bool>,
 }
 
 impl SelectObjectsCommand {
@@ -57,6 +60,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -74,6 +78,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -91,6 +96,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -108,6 +114,7 @@ impl SelectObjectsCommand {
             auto_constrain_settings: false,
             prompt_text: None,
             associative_dimensions_only: false,
+            keep: None,
         }
     }
 
@@ -131,6 +138,18 @@ impl SelectObjectsCommand {
         command
     }
 
+    /// The command's own wording, keeping only what `keep` accepts.
+    pub fn filtered(
+        prompt_cmd: &str,
+        pending_cmd: &str,
+        prompt_text: &'static str,
+        keep: fn(&codec::EntityType) -> bool,
+    ) -> Self {
+        let mut command = Self::with_prompt(prompt_cmd, pending_cmd, prompt_text);
+        command.keep = Some(keep);
+        command
+    }
+
     pub fn auto_constrain(pending_cmd: &str) -> Self {
         let mut command = Self::new(pending_cmd);
         command.auto_constrain_settings = true;
@@ -203,6 +222,10 @@ impl CadCommand for SelectObjectsCommand {
         self.associative_dimensions_only
     }
 
+    fn selection_entity_filter(&self) -> Option<fn(&codec::EntityType) -> bool> {
+        self.keep
+    }
+
     fn selection_drops_locked_point_clouds(&self) -> bool {
         matches!(
             self.pending_cmd.as_str(),
@@ -320,6 +343,9 @@ impl CadCommand for SelectObjectsCommand {
             }
             return CmdResult::NeedPoint;
         }
+        if self.keep.is_some() && self.handles.is_empty() {
+            return CmdResult::Relaunch(std::mem::take(&mut self.pending_cmd), Vec::new());
+        }
         if !self.commit_on_enter || self.handles.is_empty() {
             return CmdResult::Cancel;
         }

src/modules/insert/mod.rs

@@ -26,7 +26,7 @@ mod snap_underlays;
 pub(crate) mod solid3d_cmds;
 mod underlay_layers;
 pub(crate) mod wblock;
-mod xadjust;
+pub(crate) mod xadjust;
 pub(crate) mod xattach;
 pub(crate) mod xclip;
 pub(crate) mod xref_cmd;

src/modules/insert/xadjust.rs

@@ -1,4 +1,30 @@
+// ADJUST / -IMAGEADJUST / PDFADJUST / DWFADJUST / DGNADJUST — brightness,
+// contrast and fade of raster images; fade, contrast and monochrome of
+// PDF, DWF and DGN underlays.
+//
+//   Select image or underlay:
+//   Enter image option [Contrast/Fade/Brightness] <Brightness>:
+//   Enter brightness value (0-100) <50>:
+//
+//   Enter PDF underlay option [Fade/Contrast/Monochrome] <Fade>:
+//   Enter fade value (0-100) <25>:
+//   Monochrome? [Yes/No] <No>:
+//
+// An image value prompt offers the first image's own value. The underlay
+// option and the fade / contrast values offered are the last ones used in
+// the session, whatever the underlay kind. The host applies the value to
+// every chosen object as one undo step.
+
+use std::sync::Mutex;
+
+use codec::entities::{UnderlayDisplayFlags, UnderlayType};
+use codec::types::Handle;
+use codec::EntityType;
+
+use crate::command::{CadCommand, CmdOption, CmdResult, InputKind};
 use crate::modules::{IconKind, ModuleEvent, ToolDef};
+use crate::t;
+
 pub const ICON: IconKind = IconKind::Svg(include_bytes!("../../../assets/icons/xadjust.svg"));
 pub fn tool() -> ToolDef {
     ToolDef {
@@ -8,3 +34,330 @@ pub fn tool() -> ToolDef {
         event: ModuleEvent::Command("ADJUST".to_string()),
     }
 }
+
+/// What a command takes: `A` images or underlays, `I` images, `P` / `W` /
+/// `G` PDF / DWF / DGN underlays.
+pub fn keeps(mode: &str) -> fn(&EntityType) -> bool {
+    fn any(e: &EntityType) -> bool {
+        matches!(e, EntityType::RasterImage(_) | EntityType::Underlay(_))
+    }
+    fn image(e: &EntityType) -> bool {
+        matches!(e, EntityType::RasterImage(_))
+    }
+    fn pdf(e: &EntityType) -> bool {
+        matches!(e, EntityType::Underlay(u) if u.underlay_type == UnderlayType::Pdf)
+    }
+    fn dwf(e: &EntityType) -> bool {
+        matches!(e, EntityType::Underlay(u) if u.underlay_type == UnderlayType::Dwf)
+    }
+    fn dgn(e: &EntityType) -> bool {
+        matches!(e, EntityType::Underlay(u) if u.underlay_type == UnderlayType::Dgn)
+    }
+    match mode {
+        "I" => image,
+        "P" => pdf,
+        "W" => dwf,
+        "G" => dgn,
+        _ => any,
+    }
+}
+
+/// The command each mode belongs to.
+pub fn command_name(mode: &str) -> &'static str {
+    match mode {
+        "I" => "-IMAGEADJUST",
+        "P" => "PDFADJUST",
+        "W" => "DWFADJUST",
+        "G" => "DGNADJUST",
+        _ => "ADJUST",
+    }
+}
+
+/// The selection prompt of each command.
+pub fn select_prompt(mode: &str) -> &'static str {
+    match mode {
+        "I" => "Select image(s):",
+        "P" => "Select PDF underlay:",
+        "W" => "Select DWF underlay:",
+        "G" => "Select DGN underlay:",
+        _ => "Select image or underlay:",
+    }
+}
+
+#[derive(Clone, Copy, PartialEq)]
+enum Prop {
+    Brightness,
+    Contrast,
+    Fade,
+    Monochrome,
+}
+
+impl Prop {
+    fn label(self) -> &'static str {
+        match self {
+            Prop::Brightness => "Brightness",
+            Prop::Contrast => "Contrast",
+            Prop::Fade => "Fade",
+            Prop::Monochrome => "Monochrome",
+        }
+    }
+    fn key(self) -> &'static str {
+        match self {
+            Prop::Brightness => "BRIGHTNESS",
+            Prop::Contrast => "CONTRAST",
+            Prop::Fade => "FADE",
+            Prop::Monochrome => "MONOCHROME",
+        }
+    }
+}
+
+const IMAGE_OPTIONS: [Prop; 3] = [Prop::Contrast, Prop::Fade, Prop::Brightness];
+const UNDERLAY_OPTIONS: [Prop; 3] = [Prop::Fade, Prop::Contrast, Prop::Monochrome];
+
+/// The underlay option, fade and contrast last used in the session.
+static LAST_UNDERLAY: Mutex<(usize, u8, u8)> = Mutex::new((0, 25, 75));
+
+fn last_underlay() -> (usize, u8, u8) {
+    LAST_UNDERLAY.lock().map(|v| *v).unwrap_or((0, 25, 75))
+}
+
+enum Subject {
+    Image {
+        brightness: u8,
+        contrast: u8,
+        fade: u8,
+    },
+    Underlay {
+        kind: &'static str,
+        monochrome: bool,
+    },
+}
+
+pub struct AdjustCommand {
+    handles: Vec<Handle>,
+    subject: Subject,
+    prop: Option<Prop>,
+}
+
+/// Why a chosen set cannot be adjusted together.
+pub const MIXED: &str =
+    "*Invalid selection set. Select underlay objects of the same file type only.*";
+
+impl AdjustCommand {
+    /// The command for the chosen objects (the first one supplies the image
+    /// values and the monochrome state), or the reason they do not go
+    /// together. `None` when nothing adjustable was chosen.
+    pub fn for_objects(objects: &[(Handle, EntityType)]) -> Option<Result<Self, &'static str>> {
+        let (_, first) = objects.first()?;
+        let kind = |e: &EntityType| match e {
+            EntityType::Underlay(u) => Some(u.underlay_type),
+            _ => None,
+        };
+        if objects.iter().any(|(_, e)| kind(e) != kind(first)) {
+            return Some(Err(MIXED));
+        }
+        let subject = match first {
+            EntityType::RasterImage(img) => Subject::Image {
+                brightness: img.brightness,
+                contrast: img.contrast,
+                fade: img.fade,
+            },
+            EntityType::Underlay(u) => Subject::Underlay {
+                kind: match u.underlay_type {
+                    UnderlayType::Pdf => "PDF",
+                    UnderlayType::Dwf => "DWF",
+                    UnderlayType::Dgn => "DGN",
+                },
+                monochrome: u.flags.contains(UnderlayDisplayFlags::MONOCHROME),
+            },
+            _ => return None,
+        };
+        Some(Ok(Self {
+            handles: objects.iter().map(|(h, _)| *h).collect(),
+            subject,
+            prop: None,
+        }))
+    }
+
+    fn options_list(&self) -> &'static [Prop; 3] {
+        match self.subject {
+            Subject::Image { .. } => &IMAGE_OPTIONS,
+            Subject::Underlay { .. } => &UNDERLAY_OPTIONS,
+        }
+    }
+
+    fn default_option(&self) -> Prop {
+        match self.subject {
+            Subject::Image { .. } => Prop::Brightness,
+            Subject::Underlay { .. } => UNDERLAY_OPTIONS[last_underlay().0.min(2)],
+        }
+    }
+
+    fn default_value(&self, prop: Prop) -> u8 {
+        match (&self.subject, prop) {
+            (Subject::Image { brightness, .. }, Prop::Brightness) => *brightness,
+            (Subject::Image { contrast, .. }, Prop::Contrast) => *contrast,
+            (Subject::Image { fade, .. }, _) => *fade,
+            (Subject::Underlay { .. }, Prop::Contrast) => last_underlay().2,
+            (Subject::Underlay { .. }, _) => last_underlay().1,
+        }
+    }
+
+    fn apply(&self, prop: Prop, value: u8) -> CmdResult {
+        if let Subject::Underlay { .. } = self.subject {
+            if let Ok(mut last) = LAST_UNDERLAY.lock() {
+                last.0 = UNDERLAY_OPTIONS.iter().position(|p| *p == prop).unwrap_or(0);
+                match prop {
+                    Prop::Fade => last.1 = value,
+                    Prop::Contrast => last.2 = value,
+                    _ => {}
+                }
+            }
+        }
+        let handles: Vec<String> = self
+            .handles
+            .iter()
+            .map(|h| format!("{:X}", h.value()))
+            .collect();
+        CmdResult::Dispatch(format!(
+            "_ADJUSTAPPLY {} {} {}",
+            prop.key(),
+            value,
+            handles.join(" ")
+        ))
+    }
+}
+
+/// Whether `text` names `label` (its key letter or a longer prefix, in
+/// English or in the interface language).
+fn names(text: &str, label: &str) -> bool {
+    let english = label.to_uppercase();
+    let local = t!(label).to_uppercase();
+    !text.is_empty() && (english.starts_with(text) || local.starts_with(text))
+}
+
+impl CadCommand for AdjustCommand {
+    fn name(&self) -> &'static str {
+        "ADJUST"
+    }
+
+    fn prompt(&self) -> String {
+        match (self.prop, &self.subject) {
+            (None, Subject::Image { .. }) => {
+                t!("Enter image option [Contrast/Fade/Brightness] <Brightness>:").into_owned()
+            }
+            (None, Subject::Underlay { kind, .. }) => t!(
+                "Enter %{kind} underlay option [Fade/Contrast/Monochrome] <%{option}>:",
+                kind = kind,
+                option = t!(self.default_option().label())
+            )
+            .into_owned(),
+            (Some(Prop::Monochrome), Subject::Underlay { monochrome, .. }) => t!(
+                "Monochrome? [Yes/No] <%{value}>:",
+                value = if *monochrome { t!("Yes") } else { t!("No") }
+            )
+            .into_owned(),
+            (Some(Prop::Brightness), _) => t!(
+                "Enter brightness value (0-100) <%{value}>:",
+                value = self.default_value(Prop::Brightness)
+            )
+            .into_owned(),
+            (Some(Prop::Contrast), _) => t!(
+                "Enter contrast value (0-100) <%{value}>:",
+                value = self.default_value(Prop::Contrast)
+            )
+            .into_owned(),
+            (Some(_), _) => t!(
+                "Enter fade value (0-100) <%{value}>:",
+                value = self.default_value(Prop::Fade)
+            )
+            .into_owned(),
+        }
+    }
+
+    fn options(&self) -> Vec<CmdOption> {
+        match self.prop {
+            None => self
+                .options_list()
+                .iter()
+                .map(|p| CmdOption::new(p.label(), &p.label()[..1]))
+                .collect(),
+            Some(Prop::Monochrome) => vec![CmdOption::new("Yes", "Y"), CmdOption::new("No", "N")],
+            Some(_) => Vec::new(),
+        }
+    }
+
+    fn input_kind(&self) -> InputKind {
+        InputKind::SingleToken
+    }
+
+    fn on_text_input(&mut self, text: &str) -> Option<CmdResult> {
+        let text = text.trim().to_uppercase();
+        let invalid = || {
+            Some(CmdResult::ReportError(
+                t!("Invalid option keyword.").into_owned(),
+            ))
+        };
+        match self.prop {
+            None => {
+                let chosen = if text.is_empty() {
+                    Some(self.default_option())
+                } else {
+                    self.options_list()
+                        .iter()
+                        .copied()
+                        .find(|p| names(&text, p.label()))
+                };
+                let Some(prop) = chosen else {
+                    return invalid();
+                };
+                self.prop = Some(prop);
+                Some(CmdResult::NeedPoint)
+            }
+            Some(Prop::Monochrome) => {
+                let Subject::Underlay { monochrome, .. } = self.subject else {
+                    return Some(CmdResult::Cancel);
+                };
+                let on = if text.is_empty() {
+                    monochrome
+                } else if names(&text, "Yes") {
+                    true
+                } else if names(&text, "No") {
+                    false
+                } else {
+                    return invalid();
+                };
+                Some(self.apply(Prop::Monochrome, on as u8))
+            }
+            Some(prop) => {
+                let value = if text.is_empty() {
+                    Some(self.default_value(prop))
+                } else {
+                    text.parse::<u8>().ok().filter(|v| *v <= 100)
+                };
+                match (value, &self.subject) {
+                    (Some(v), _) => Some(self.apply(prop, v)),
+                    (None, Subject::Image { .. }) => Some(CmdResult::ReportError(
+                        t!("Value must be an integer between 0 and 100.").into_owned(),
+                    )),
+                    (None, Subject::Underlay { .. }) => Some(CmdResult::ReportError(
+                        crate::tf!("Requires an integer between {min} and {max}.", min = 0, max = 100)
+                            .into_owned(),
+                    )),
+                }
+            }
+        }
+    }
+
+    fn on_point(&mut self, _pt: glam::DVec3) -> CmdResult {
+        CmdResult::NeedPoint
+    }
+
+    fn on_enter(&mut self) -> CmdResult {
+        self.on_text_input("").unwrap_or(CmdResult::Cancel)
+    }
+}
+
+inventory::submit!(crate::command::CommandRegistration {
+    names: &["-IMAGEADJUST", "PDFADJUST", "DWFADJUST", "DGNADJUST"]
+});

src/scene/model/image_model.rs

@@ -252,7 +252,7 @@ impl ImageModel {
         Some(Self {
             render_instance: None,
             file_path: img.file_path.clone(),
-            pixels: decoded.pixels,
+            pixels: adjusted_image_pixels(&img.file_path, &decoded.pixels, img.brightness, img.contrast),
             width: decoded.width,
             height: decoded.height,
             opacity,
@@ -659,6 +659,67 @@ pub fn clear_image_cache() {
 /// The result — including a `None` — is cached so the raster loader and the
 /// unresolved-reference placeholder agree on one answer without fetching
 /// twice.
+/// Brightness and contrast (0–100, 50 = unchanged) as one lookup table per
+/// colour channel. Measured against the reference's display of a gradient:
+/// brightness is a power curve x^g with g = ((100 − B) / B)^0.72 (0 is black,
+/// 100 white); contrast bends lightness around one half the same way,
+/// 0.5 ± 0.5·|2x − 1|^h with h = ((100 − C) / C)^0.72 (0 is flat grey, 100 a
+/// hard step). Brightness is applied first. Fade is the model's opacity.
+pub(crate) fn brightness_contrast_lut(brightness: u8, contrast: u8) -> [u8; 256] {
+    // ponytail: the 0.72 exponent is a least-squares fit of seven measured
+    // levels (within about 10/255); refine with more reference samples.
+    let curve = |v: u8| -> f64 { (f64::from(100 - v.min(100)) / f64::from(v.min(100).max(1))).powf(0.72) };
+    let mut lut = [0u8; 256];
+    for (i, out) in lut.iter_mut().enumerate() {
+        let mut x = i as f64 / 255.0;
+        x = match brightness.min(100) {
+            0 => 0.0,
+            100 => if i == 0 { 0.0 } else { 1.0 },
+            b => x.powf(curve(b)),
+        };
+        x = match contrast.min(100) {
+            0 => 0.5,
+            100 => if x >= 0.5 { 1.0 } else { 0.0 },
+            c => {
+                let d = 2.0 * x - 1.0;
+                0.5 + 0.5 * d.signum() * d.abs().powf(curve(c))
+            }
+        };
+        *out = (x.clamp(0.0, 1.0) * 255.0).round() as u8;
+    }
+    lut
+}
+
+/// The decoded raster with the entity's brightness and contrast applied,
+/// memoised per source and setting (the GPU keeps textures per pixel buffer).
+fn adjusted_image_pixels(path: &str, pixels: &Arc<Vec<u8>>, brightness: u8, contrast: u8) -> Arc<Vec<u8>> {
+    if brightness == 50 && contrast == 50 {
+        return Arc::clone(pixels);
+    }
+    type Key = (String, usize, u8, u8);
+    static CACHE: OnceLock<Mutex<HashMap<Key, Arc<Vec<u8>>>>> = OnceLock::new();
+    let key = (path.to_string(), Arc::as_ptr(pixels) as usize, brightness, contrast);
+    let cache = CACHE.get_or_init(|| Mutex::new(HashMap::new()));
+    if let Some(hit) = cache.lock().unwrap_or_else(|p| p.into_inner()).get(&key) {
+        return Arc::clone(hit);
+    }
+    let lut = brightness_contrast_lut(brightness, contrast);
+    let mut out = pixels.as_ref().clone();
+    for px in out.chunks_exact_mut(4) {
+        for c in &mut px[..3] {
+            *c = lut[*c as usize];
+        }
+    }
+    let out = Arc::new(out);
+    let mut cache = cache.lock().unwrap_or_else(|p| p.into_inner());
+    // ponytail: cleared wholesale past 64 entries; an LRU if many images are adjusted.
+    if cache.len() > 64 {
+        cache.clear();
+    }
+    cache.insert(key, Arc::clone(&out));
+    out
+}
+
 pub fn resolve_image(path: &str) -> Option<DecodedImage> {
     let path = path.trim();
     if path.is_empty() {