The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A hatch's area was not the area of anything. Its boundary was flattened
into a ring by pushing an arc's *centre* into it, and a spline's control
points — neither of which is on the boundary — and the shoelace formula
was run over the result. Boundary edges now go through the kernel, which
measures each for what it encloses: an arc contributes its sector, a
spline is integrated.
AREA had three measurements between them. The bulged-polyline one
carried its own arc corrections; the planar entities it did not cover
fell through to mass properties. Both are now one call on the entity's
curve, which gets the bulges, the ellipse and the spline right in the
same place. What is left is the genuinely spatial — a 3D polyline, a
spline whose points wander off any plane — measured as rings of points
by Newell's method rather than by projecting them flat.
Regions were doing the same Newell sum by hand. They share it now.
Co-Authored-By: Claude Opus 5 <[email protected]>
Every angle row went through the linear formatter, so switching LUNITS
to Architectural showed a block's Rotation as feet-and-inches — and the
string wouldn't parse back, wedging the field until it was cleared and
retyped. Only the decimal/fractional LUNITS survived by accident.
New edit_angle row helper formats angles with format_angle
(AUNITS/AUPREC: decimal degrees, DMS, grads or radians), applied to all
17 angle rows (rotations, obliquing, arc start/end, hatch pattern
angle, multileader text rotation). parse_angle_deg converts every
AUNITS display form back to degrees ("30°"/"30d", DMS 30°15'20",
33.33g, 0.52r) and parse_f64 falls back to it, so the displayed value
round-trips through an edit.
Closes#297
Co-Authored-By: Claude Fable 5 <[email protected]>
GRADIENT silently degraded to a plain hatch: add_hatch rebuilt the
render model from the DXF entity but never encoded the gradient on it,
so the committed fill lost its gradient entirely. The entity now
carries the full gradient record (name, angle, colour stops,
solid-fill flag), and the standard shape set became selectable:
Linear / Cylinder / Spherical / Hemispherical / Curved plus an Invert
toggle, offered as prompt buttons on the GRADIENT command and as a
Gradient type dropdown + Invert box in the properties panel. All nine
standard DXF names round-trip (inverted linear persists by swapping
the colour stops), and the shaders shape each kind distinctly —
mirrored cylinder, eased curve, dome-profiled hemisphere — on both the
native and web pipelines without changing the GPU struct sizes.
Co-Authored-By: Claude Fable 5 <[email protected]>
Property edits on a hatch were invisible: fills render from the
prebuilt model cache, which move/copy refreshed but the properties
path never did — so a pattern-scale change (which must also rescale
the stored final pattern lines by the ratio) changed nothing on
screen (#415). invalidate_property_targets now rebuilds the edited
fill's cached model via Scene::refresh_fill_model.
The background row gains an on/off box: off removes the
HATCHBACKGROUNDCOLOR record entirely (the colour could never be
reverted before), on seeds ByLayer. The codec covers the full
colour-method range (ByLayer / ByBlock / RGB / ACI) and the backdrop
resolves ByLayer / ByBlock through the style chain. "More Colors…" on
the background picker now opens the palette window targeting the
background colour — it used to just close the picker.
Co-Authored-By: Claude Fable 5 <[email protected]>
Gradient Type (One/Two color), Color 1 and Color 2 editable via a generic field-keyed colour picker path. Background colour editable and stored as HATCHBACKGROUNDCOLOR extended data (group 1071 true colour), rendered in OCS as a solid backdrop drawn behind the pattern. Hide Origin X/Y for gradients (pattern-only concept) and drop the redundant gradient rows from the pattern branch.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Merge duplicate Type into pattern_type; Type/Associative/Island detection as dropdown/toggle; Angle/Scale/Spacing/Origin X-Y editable; Color via picker. Reorder Pattern group, drop redundant Color/Transparency/Layer override and the Misc section. Wire the pattern origin (per-line base_point) into the render (x0/y0 relative to world_origin) so it affects dashed/offset patterns; add a circle origin grip at the hatch centroid (new GripShape::Circle).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Reclassify every property row to match standard palette behaviour: a row
is editable only when its value maps directly to a stored field AND its
apply_geom_prop handler is wired; computed/derived/count/handle/
cross-object values stay read-only.
Newly editable (all apply-wired): attribute tag/prompt; ellipse major
radius; hatch Double; lwpolyline closed/linetype-gen; mline style;
multileader annotative/landing/background-fill; polyline 2D+3D vertex
coords/segment widths/linetype-gen; shape style; spline control/fit
point coords, weight, fit tolerance, tangents; table break-option flags;
text alignment point, upside-down, backward; underlay display flags.
Corrections: spline Degree -> read-only (editing desynced the knot
vector); removed a duplicate leader "Arrowhead" row.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Bump acadrust to a46cb8b (spline knot parameterization + mtext line-space
style now stored) and populate rows the builders left blank:
Entity-local: spline Knot Parameterization + closed-spline Area (shoelace),
mtext Line space style, hatch Spacing (pattern-line offset), leader Text
offset (annotation offset), region Area + Perimeter (wire-loop approx).
Doc-dependent (resolved in app/properties.rs where the document is
reachable): insert Block Unit + Unit factor (block record units vs
INSUNITS), underlay Name + Path (definition object), leader Text style /
vertical placement / overall scale and tolerance Text style (dimension
style), multileader Max points + segment angles (mleader style).
Rows needing an annotation-scale / sheet-set subsystem or an internal
PDF/DWF layer parser are intentionally left blank.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rewrite each entity's property builder to the per-entity group/row spec:
the correct sections (Geometry, Misc, Text, Pattern, Lines & Arrows, Leaders,
Block, …) with the spec's rows and real computed values — Diameter,
Circumference, Area, Delta X/Y/Z, Angle, Total angle, Arc length, Radius ratio,
etc. — plus apply routing for the editable rows.
Covers ~26 entities (Line, Circle, Arc, Point, Ellipse, Spline, polylines,
Ray/XLine, Insert, Text, MText, Hatch, Leader, MultiLeader, Tolerance, Solid,
Solid3D/Region/Body, meshes, MLine, Raster/Wipeout, Underlay, Table, Viewport,
Attribute, OLE). The 3D Visualization/Material group and the full Dimension
spec are deferred (they need document access for material/dimstyle name
resolution). Rows whose data is not in the pinned acadrust revision are shown
as empty placeholders, to be filled when the dependency is bumped.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Groundwork for making the Properties panel conform to the per-entity group/row
spec (PROPERTIES.md). The panel already renders a Vec of sections, but each
entity could only express a single geometry section.
Change PropertyEditable::geometry_properties (and the EntityTypeOps enum
dispatch) to return Vec<PropSection>, update the two impl macros, and flatten
in properties_sectioned so the panel shows [General] + the entity's groups.
Every entity builder is wrapped to return its existing section as a one-element
Vec — pure mechanical change, no rows or titles altered, panel output identical.
Enables Phase 2: rewriting each entity's groups/rows to match the spec.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Now that geometry reaches the GPU/CPU as absolute coordinates via the
double-single relative-to-eye path, world_offset is always [0,0,0]. Strip
the parameter that was threaded through the whole tessellation / block-
expansion / fallback / camera-decode chain and the ExpandCtx field that
carried it — ~340 references across 20 files, all subtracting zero.
- truck_tess: to_local / to_local_low / tessellate_* drop the offset arg;
to_local is now a pure double-single split.
- tessellate: offset_to_ds → points_to_ds (pure DS split); tessellate(),
tessellate_entity(), fallback_geometry(), solid_wire_fallback(),
entity_aabb(), expand_insert(), expand_block_meshes(), the dimension
helpers (vec3_local, dimension_snap_pts, …), text_support, leader,
multileader, image_model, xclip and camera_from_view all lose the param.
- block_cache: ExpandCtx loses its world_offset field.
- Remove the now-dead offset_snap_pts and the unused set_grid_snap.
Behaviour is unchanged (the offset was zero everywhere); the compiler
verifies every call site.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two UTM-scale rendering defects.
- UCS icon jittered: it projects only axis DIRECTIONS but went through the
full view_proj, whose ~5.7e6 translation cancels catastrophically in f32.
Feed it the rotation-only view_proj_rte instead (translation dropped).
- Fallback outline geometry (hatch boundary, viewport/insert/ole2frame
frames, Solid3D edge wires) built absolute f32 points with an empty
points_low, so at UTM the outline sat ~0.5 m off its own fill (the hatch
fill renders precisely via the world_origin-relative HatchModel pipeline).
FallbackGeometry now carries absolute f64 points + key vertices; the
tessellate dispatcher splits them into the double-single high/low pair the
relative-to-eye wire pass needs, so outlines land exactly on their fills.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two follow-ups from the boundary-arc convention audit:
- ELLIPSE is a WCS entity in DXF (codes 10/11 are world coordinates,
unlike ARC/CIRCLE). The renderer ran center and major_axis through the
arbitrary-axis OCS, which misplaced any ellipse whose normal isn't Z-up
— e.g. the (0,0,-1) result of a mirrored-block explode. Read them as
WCS; pairs with acadrust 569bd4d, which stores WCS on its explode
paths. Z-up ellipses are unaffected (the conversion was an identity).
- The MIRROR command's hand-rolled hatch closure swapped boundary-arc
angles itself — only valid for ccw arcs and ignorant of the stored
mirrored-angle / wrap-encoded-sweep conventions. It now builds a
reflection Transform (new reflection_about_xy_line helper) and
delegates to acadrust's transform_hatch, the single source of truth
for those conventions. Covered by a Line→Arc→Line continuity + sweep
regression test.
Note: full effect of the ellipse change lands once the acadrust pin is
bumped to 569bd4d; until then only the (previously broken) non-Z-up
corner differs.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Grip markers drew visibly offset from the entity on large-coordinate
(UTM-scale) drawings: every Grippable impl cast the f64 entity coordinates
to f32 BEFORE the world-offset subtraction, and at 1e7 magnitude an f32
holds ~0.9 drawing units of rounding error. The wires subtract the offset
in f64 first (precision-preserving), so the grips landed up to ~1 unit
away from the geometry they belong to.
GripDef.world is now DVec3: producers fill it straight from the f64
entity data, refresh_selected_grips subtracts the world offset in f64,
and only the small offset-local result is cast to f32 for screen-space
projection (grips_to_screen / find_hit_grip) and drag state.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Phase 1 of bringing the grip vocabulary in line with the standard
CAD convention: drop the per-position-type shape encoding (Diamond
for translate, Circle for parameter) and use a plain square for
every endpoint / vertex / centre grip. The behavioural midpoint vs
vertex distinction stays — it lives on `GripDef::is_midpoint` and
drives `Translate` vs `Absolute` in the grip-edit dispatcher — only
the marker shape collapses.
- `GripShape` keeps `Square`, `Rectangle`, `Triangle`. Diamond /
Circle are gone.
- `GripDef` gains `dir: Option<[f32; 2]>` — a world-XY direction
vector consumed by `Rectangle` to orient the box along its
segment.
- `entities::common` exposes `square_grip`, `center_grip` (same
square marker, flagged as translate), `rectangle_grip(id, world,
dir)` for oriented mid-segment handles, and a kept-for-Phase-2
`triangle_grip`.
- `overlay::GripMarker` / `grips_to_screen[_paper]` thread `dir`
through to the canvas painter; the Rectangle path rotates the
box around the grip centre using the world-XY direction (flipping
the sin for screen-Y).
Every existing `diamond_grip(id, w)` call becomes `center_grip(id,
w)` — the visual change is square-replacing-diamond at line
midpoints / arc midpoints / circle centres / ellipse centres /
viewport / hatch loop centroids / dimension grips / image corners /
multileader / ray / underlay / ole2frame / solid3d.
`LwPolyline` grows a stretch handle on every segment (straight or
arc), drawn as the new oriented rectangle. The grip-edit path
translates both segment endpoints for straight segments and
adjusts the arc bulge from the new midpoint for arc segments.
The polyline arm of the hatch wire outline guarded its NaN separator
with `if count > 0 && pts.len() != start_idx`. `start_idx` was assigned
to `pts.len()` two lines earlier with nothing in between to grow `pts`,
so the inequality was structurally always false — the separator was
never emitted.
When a hatch carried more than one boundary path (multi-region hatch),
the renderer drew a straight segment from the last vertex of path A to
the first vertex of path B because the two polylines lived in `pts`
back-to-back with no NaN break. The result was a visible stray line
between hatch regions.
Switch the polyline arm to the same `if !pts.is_empty()` guard the
Line / CircularArc / EllipticArc arms use, and capture `start_idx`
*after* the separator so the closed-loop close-back logic still points
at this polyline's first real vertex.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
The Hatch boundary-mirror transform called
`crate::scene::transform::reflect_xy_point(&mut x.x, &mut x.y, p1, p2)`
nine times with rustfmt expanding each long-path call into a six-line
block. Total: ~55 lines for nine reflects.
Add a local `use crate::scene::transform::reflect_xy_point as reflect;`
at the top of the closure so each reflect collapses to a single line.
-19 lines, no behavior change.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
The same DXF/DWG bulge → (center, radius, sweep) formula was inlined
in six places (hatch outline, polyline tess + truck path, lwpolyline
×4, scene hatch fill, explode bulge_to_arc) — each with subtly
different sweep-direction handling for the bulge sign.
Add `entities::common::BulgeArc { center, radius, start_angle,
end_angle, sweep }` with one `from_bulge(p0, p1, bulge)` constructor
and a `sample(t)` helper. Callsites collapse to a few lines.
Net: -121 lines, one canonical sweep-direction convention shared by
all consumers.
array.rs (the path-along-curve f32 helper) keeps its inline math —
its sign convention is inverted relative to the others and changing
it without exercising the array-path command risks regressing the
output.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
The trait isn't deprecating anything — it carries the path entities
take when they're not covered by the truck topology pipeline
(Viewport, Insert, Hatch outline, Ole2Frame). "Fallback" names the
purpose; "Legacy" implied retirement that isn't actually on the
roadmap.
Same rename for LegacyGeometry → FallbackGeometry,
legacy_geometry() → fallback_geometry().
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Each entity's tessellation now lives alongside its definition in
entities/*.rs, attached to the entity type via a local trait:
LegacyTess — Viewport / Insert / Hatch / Ole2Frame
(fallback path for entities not on the truck pipeline)
LeaderTess — Leader
MultiLeaderTess — MultiLeader
DimensionTess — Dimension (carries its dim-only helpers too:
~1700 lines of dim_geometry, dim_text_*, format_*,
tolerance, suppression, etc.)
scene/tessellate.rs keeps only the cross-entity dispatcher plus the
shared dim machinery reused by leader/multileader/dimension
(ArrowKind, DimGeom, append_arrow, arrow_from_block, add_segment,
add_polyline, normalized_or, push_tri, color_or_inherit, entity_z,
offset_snap_pts). Cross-entity arc helpers + aci_to_rgba moved to
scene/tess_util.rs.
scene/tessellate.rs shrinks from ~3300 to 809 lines. Compile clean,
all 9 tests pass.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Polyline, Line, CircularArc, EllipticArc, and Spline boundary edges
all get diamond grips at their control vertices. Dragging a grip updates
the underlying DXF boundary vertex and immediately rebuilds the GPU
hatch model via Scene::apply_grip.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
