Entity converters were casting WCS coordinates to f32 before the renderer
subtracted world_offset, which destroyed sub-unit precision on drawings
sitting at large coordinates (typical UTM-style CAD files). The multileader
case made it visible — glyphs warped under rotation — but every entity
that emits TruckObject::Lines/SegmentedLines/key_vertices/fill_tris was
affected.
Type changes (in src/scene/acad_to_truck.rs):
- TruckObject::Lines / SegmentedLines: Vec<[f32; 3]> → Vec<[f64; 3]>
- TruckEntity::key_vertices / fill_tris: f32 → f64
All ~17 producer files updated to keep WCS coordinates in f64 right up to
the TruckEntity boundary. The consumer in scene/tessellate.rs now performs
`(x - ox) as f32` (f64 subtract, then cast) for points, key_vertices, and
fill_tris — preserving precision near the camera origin even when the
drawing sits at million-unit coordinates.
catmull_rom_pts (multileader spline) is now f64; the scene path widens its
offset-relative f32 ctrl points to f64 around the call and narrows back at
the output.
Notes:
- Table layout still uses glam::Vec3 (f32) internally; widened to f64 only
at the TruckEntity boundary for type compatibility. Separate cleanup to
switch its internal math to f64 is tracked.
- snap_pts and tangent_geoms remain f32 — they are UI feedback (snap
candidates, tangent hints) and the precision is sufficient there.
Multileader text was emitted as a single literal stroke pass with no MText
code handling, no rotation, no attachment, no line breaks, no per-piece
color and bad f32 precision under world_offset. Two separate render paths
both had the same bug, and one was masking the fix in the other.
This rewrite, applied to both paths:
- Strips MText format codes (`{\fArial Black|b0|i0|c162|p34;...}`) so the
rendered text is the actual content, not the markup.
- Honors text_rotation (preferring text_direction so transforms survive),
text_attachment_point (Left/Center/Right horizontal anchor), and
text_left_attachment for vertical alignment via a shared
v_offset_for_attachment helper.
- Splits on \P/\n/\N and word-wraps to text_width.
- Applies line_spacing_factor with the same 5/3 × height convention as
MText.
- Resolves the text style via text_style_handle (fallback STANDARD).
- Applies ml.scale_factor everywhere (arrow size, dogleg length, text
height, text width). anno_scale is now only applied when
enable_annotation_scale is set.
- Splits the scene-level output into separate WireModels so leader,
text, frame and background fill each carry their own colour
(ctx.text_color, ml.text_frame, ctx.background_fill_color).
- Mirrors text_direction, base_direction and root.direction in
apply_transform so a mirrored multileader's text follows the geometry
instead of staying at its original rotation.
- Computes the text origin and frame corners in offset-relative f32
space — drawings sit at large absolute coordinates and casting to f32
before subtracting world_offset was wrecking the rotated sub-glyph
precision.
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
- Scale popup dropdown replaces cycle behavior; paper-space viewport scale
editable when a viewport is active/selected
- CANNOSCALE persisted via DXF $USERR1 (read on open, write on save)
- PSLTSCALE: linetype dash lengths scaled by viewport anno_scale so dashes
appear uniform physical size in paper space
- MultiLeader: arrow size, dogleg length, and text height scale with
anno_scale; leader line paths (world coords) stay fixed
- Leader: arrow size and hookline length scale with anno_scale; also
corrects world_offset subtraction that was previously deferred to the
TruckObject::Lines path
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
OLE2Frame: full TruckConvertible/Grippable/PropertyEditable/Transformable
impls in src/entities/ole2frame.rs — grips on corners + center, properties
panel, translate/scale transforms.
Shape: rotation (DXF code 50) now converted degrees→radians on load in
fix_dxf_dimension_rotations(), matching Dimension and Attribute behaviour.
All ❌ gaps resolved. Remaining: Viewport GPU scissor, LWPolyline plinegen.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Tessellates bottom + top paths with NaN-separated walls at each vertex.
Arc segments (bulge != 0) use 16-step parametric tessellation.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Arc: tessellates bottom + top arcs (32 segs each) with 2 endpoint walls.
Circle: tessellates bottom + top circles (64 segs each) with 4 quadrant walls.
Both use TruckObject::Lines with NaN-separated segments.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
When line.thickness != 0, renders 4 NaN-separated wire segments
(bottom, top, left wall, right wall) using TruckObject::Lines.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Entities carrying a non-standard extrusion normal (normal ≠ (0,0,1)) were
rendered flat in the XY plane. The DXF arbitrary-axis algorithm is now
implemented in scene::transform::{ocs_axes, ocs_point_to_wcs} and applied
during tessellation of Arc, Circle, and Line so they render correctly on
tilted planes in 3D DXF files.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Splines backed by rational NURBS (circles, conics) were tessellated as
uniform B-splines, losing the weighting that defines the curve shape.
Now BSplineCurve<Point3> is used only when weights are absent or empty;
when weight data is present a NurbsCurve<Vector4> is built from the
homogeneous control points so circles and conics render accurately.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
When a corner grip is dragged, view_height is now updated proportionally
with the new frame height so that scale = height/view_height stays constant.
The visible model-space area grows/shrinks with the frame instead of the
content appearing to zoom.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Grip points in paper space now use the 2-D linear to_px transform
(tx/ty/ortho_size) instead of the 3-D view_proj matrix, matching the
coordinate system used by PaperCanvas
- world_offset is no longer subtracted from paper-space entity grip
positions — paper-space coordinates are already unoffset (same rule
as wire tessellation in wires_for_block)
- MTEXT v_offset corrected for all attachment points: CXF glyphs sit
on the baseline and extend upward, so Top attachment needs v_offset=-h,
Bottom needs (n_lines-1)*line_h, Middle is the midpoint of the two
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Previously \\U+XXXX was in the "strip until ;" list, silently dropping
all Unicode character references (°, ±, ⌀, Ø, €, …).
Changes:
- \\U+XXXX / \\u+XXXX decode to the actual Unicode character (was stripped)
- \\S upper/lower; stacked fractions/tolerances render as "upper/lower"
or "upper^lower" instead of leaking as literal text
- \\t tab → four spaces (was leaking as literal 't')
- Unknown escapes silently consume the code char (was leaking it)
- \\M+...; DBCS multibyte — stripped (added to semicolon-arg list)
- \\X paragraph-align end marker — stripped cleanly
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Line spacing: DXF code 44 (line_spacing_factor) is a multiplier on
AutoCAD's default baseline-to-baseline distance of 5/3 × text_height.
The renderer was using factor × 1.0 instead of factor × 1.667, making
all MTEXT appear cramped.
Blank paragraphs: split_mtext_lines was filtering out empty strings, so
\\P\\P (double paragraph break used to separate sections) was silently
collapsed. Empty lines in the middle of the block are now preserved;
only leading/trailing blank lines are stripped.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- fix: polyline arc center sign was inverted (- → +) causing arcs to render on the
wrong side in LwPolyline and Polyline2D
- fix: store glyph strokes in local space with f64 origin so world_offset subtraction
uses f64 precision; prevents blocky text at large UTM coordinates
- fix: Face3D fill darkened to 45% so edge wires are visually distinct from fill
- fix: wire batch vertex buffer chunked to 256 MB GPU limit (was panic on large files)
- fix: gpu_face3d_edges changed from Option<WireGpu> to Vec<WireGpu> to support chunks
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Three root causes caused all geometry and UCS arrows to disappear:
1. TruckObject::Lines and TruckObject::Text variants returned world-space
f32 coordinates without applying world_offset, so fit_all() computed
bounds spanning from local space to UTM world space (~4 M m), placing
the camera impossibly far from all visible geometry.
2. Ray/XLine entities with unnormalized direction vectors (common in some
DXF exporters) produced astronomically large far-point coordinates
(up to 1e28) that overwhelmed the camera fit even after the offset fix.
Fixed by normalizing the direction vector before multiplying by
DISPLAY_EXTENT.
3. Origin-stuck corrupted entities (coordinates ≈ 0 in world space become
≈ -world_offset in local space) pulled the fit_all() bounds far from
the actual drawing. Fixed by computing local_extent_max from EXTMIN/EXTMAX
(10× safety margin) and skipping points outside that range in fit_all().
Additional hardening: wire_gpu.rs now skips ±inf segments (not just NaN),
and snap_pts/key_vertices in all TruckObject variants are offset-corrected.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Complex linetypes now render embedded text elements (e.g. GAS_LINE's
"GAS" labels): the LtSegment::Text variant is parsed from LIN files,
scaled along with shape/dash segments, and tessellated via
cxf::tessellate_text_ex aligned to the linetype direction.
Full ellipses gain four Quadrant snap hints at ±major/±minor axis
endpoints in addition to the existing Center snap, matching AutoCAD
snap behaviour.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
When path_type == Spline, the leader line is now tessellated as a
Catmull-Rom spline through the bend points (8 segments per span)
instead of connecting them with straight segments. Straight/Invisible
path types are unchanged. Key vertices and tangent geoms still use the
raw control points for snap and tangent snapping.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Spline: if flags.closed/periodic and B-spline endpoints don't meet,
add an explicit closing Wire segment to eliminate the visual gap.
- Hatch BoundaryEdge::Spline: evaluate the B-spline at 16 uniform
parameter samples (de Boor via truck BSplineCurve) instead of
plotting raw control points as a polyline; falls back to control-
point polyline for degenerate knot/degree inputs.
- Ellipse arc key_vertices and LWPolyline midpoint grips committed
separately; this commit wraps the spline-related fixes.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Partial ellipse arcs now populate key_vertices with both endpoints so
Endpoint snap works correctly. LWPolyline arc segments (bulge ≠ 0) get
a diamond grip at the arc midpoint; dragging it recomputes the segment
bulge via circumcircle of start/mid/end, giving interactive arc editing.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Polyline3D tessellation now separates spline-fit curve vertices (flag 8)
from frame control points (flag 16): the curve vertices form the rendered
wire while control points are exposed as key_vertices for snap. Polylines
without spline flags are unchanged.
DXF post-load fixup now also converts AttributeEntity and AttributeDefinition
rotation from degrees to radians (group code 50 bug), matching the existing
LinearDimension fix. Attribute text rendered from DXF files now has correct
orientation.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Spline entities now expose fit_points (or control_points when no fit
points are defined) as key_vertices, enabling Endpoint and Midpoint
snap to reach spline construction points.
TextStyle is_backward flag is applied by negating the width_factor,
producing horizontally mirrored text. is_upside_down rotates the text
180°. Both tessellate_text_ex and text_local_bounds now handle negative
width_factor without clamping it to zero.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Text/MText values now correctly handle DXF special-character sequences:
- %%d → °, %%p → ±, %%c → ⌀, %%nnn → Unicode scalar (resolved in tessellation)
- %%u / %%o toggle underline and overline strokes for TEXT entities
MText decoration codes (\L/\l, \O/\o, \K/\k) were previously consumed
as argument-bearing codes, silently eating the decorated text. Fixed
strip_mtext_codes to keep them as zero-width markers; tessellate_text_ex
now emits actual line strokes (underline, overline, strikethrough).
measure_mtext_chars and word_wrap skip markers so line widths are correct.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Empty LwPolyline and single-control-point Spline fallbacks were calling
builder::line(&v, &v) with the same Rc vertex, triggering the
truck-topology panic "Two same vertices cannot construct an edge."
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Arc rendering now respects the normal vector: when normal.z < 0 the
midpoint is placed on the clockwise side so the curve sweeps the right way
- Removed spurious .to_radians() / .to_degrees() round-trips in arc.rs
(angles are already stored in the unit the trig functions expect)
- apply_grip and apply_transform use consistent angle units
- normalize_insert_entity no longer converts arc angles; the old conversion
was only needed by the now-removed .to_radians() call in to_truck
- Added fix_mirrored_arc: swaps arc start/end angles when the INSERT has a
mirrored scale (x_scale * y_scale < 0) so exploded arcs curve correctly
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- src/entities/shape.rs: diamond marker at insertion point (SHX glyphs
cannot be rendered without the binary .shx file, so a placeholder is used)
- Grips: single insertion-point grip
- Properties: Name, Style (read-only), Insert X/Y/Z, Size, Rotation
- Transformable: translate, mirror, scale, rotate
- Registered in entities/mod.rs, entities/traits.rs, app/commands.rs
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Replace raw text dump with proper boxed feature-control frame:
- parse_gdt_rows(): splits %%v cells and ^J row separators
- substitute_gdt_codes(): strips {\Fgdt;X} patterns, maps symbol chars
to 3-letter ASCII labels (POS, PRP, PAR, SYM, CIR, CYL, …)
- tessellate_tolerance(): outer rectangle, row separators, column
dividers, and CXF-tessellated cell text — all as Vec<Vec<[f32;2]>>
(TruckObject::Text polyline path)
- Column widths computed per cell content; text centred in each cell
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
TruckConvertible renders the 4 perimeter edges as wireframe outline.
The scene injects a solid-fill HatchModel for the filled quad using the
existing hatch GPU pipeline (DXF Z-order: p0→p1→p3→p2).
Grippable provides 4 square corner grips; grip moves rebuild the fill model.
PropertyEditable exposes all 4 corners and thickness. Transformable handles
move/rotate/scale/mirror via the standard entity transform path.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Polyline, Line, CircularArc, EllipticArc, and Spline boundary edges
all get diamond grips at their control vertices. Dragging a grip updates
the underlying DXF boundary vertex and immediately rebuilds the GPU
hatch model via Scene::apply_grip.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Linear/Aligned: first point, second point, definition point, text position
Radius/Diameter: center (angle_vertex), radius point, text position
Angular2Ln/Angular3Pt: vertex, two extension points, arc def point, text
Ordinate: origin, feature location, leader endpoint, text position
Text position grip shared across all types; measurement recalculated after edit.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- mline.rs: MLine renders center spine + two parallel offset lines at
±scale/2 using the vertex miter directions; vertex grips; scale,
closed and style-name properties
- tolerance.rs: Tolerance renders the GDT text string via font
tessellation at insertion_point with rotation from direction vector;
insertion grip and position properties
- properties.rs: Dimension entity's style_name EditText is upgraded to
a Choice dropdown when document.dim_styles is non-empty, enabling
point-and-click DimStyle assignment without a separate panel
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- raster_image.rs: RasterImage renders as border rectangle + X diagonals
(pixel placeholder); Wipeout renders border or polygon clip boundary;
both support insertion_point grip, brightness/contrast/fade properties,
clipping toggle, and mirror transform (u/v vectors reflected)
- attribute.rs: AttributeDefinition renders default_value (or [TAG] if
empty) as font-tessellated text; AttributeEntity renders the live value;
both support insertion grip, position/height/rotation properties,
and transform operations
- mod.rs + traits.rs: wire up all four new entity types through the full
dispatch chain (to_truck, grips, geometry_properties, apply_geom_prop,
apply_grip, apply_transform)
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
