On the web build, {"op":"open","path":…} resolves the name against the
browser's recent-files cache, so a file that is not already there cannot be
opened by the control channel. Accept {"op":"open","name":…,
"data_base64":…} instead: the bytes go through the same parse, caching
and recovery path as a file chosen in the browser picker
(io::open_bytes_web, now shared with pick_and_load_web).
Native builds keep path-based open and reject data_base64 with
invalid_request.
Refs #1349
A drawing saved by a commercial CAD application (tests/fixtures/plot,
provided by Panos: one 10 m line, three layouts) corrects several
assumptions of the previous commit:
- rotation is relative to the medium's own orientation: an unchanged sheet
keeps the driver's exact medium (its PDF driver lists landscape media of
its own, written with rotation 0; a system printer's portrait A3 plotted
landscape carries 90); only a newly picked sheet is written as the
catalogue's portrait medium
- the stored scale factor (DXF 147) is the ratio × 25.4 on millimetre page
setups and the plain ratio on inch ones; the "use standard scale" bit
stays clear for standard and custom scales and is set for fit-to-paper;
a standard code is kept across a paper-unit conversion ("1:1" on an
inch page setup over a millimetre paper space is 1 in = 25.4 units)
- layout plots take the same scale path as every other area, so a foreign
layout's paper-space unit survives
- "plot with plot styles" / "display plot styles" round-trip as the
dialog's checkboxes, independent of a style table being named
- layout limits place the sheet at minus its displayed margins, the way the
source application does (the printable corner is the paper-space origin);
the margin ↔ rotation mapping shared by the printable-area guide now
turns the medium's top margin into the layout's left one at 90°
The fixture round-trips through the dialog with every stored field
unchanged; picking a new sheet on it writes the canonical form.
Co-Authored-By: Claude Opus 5 <[email protected]>
One writer (plot_settings_from_dialog) now serves both the layout's embedded
settings and named page setups, so the two can no longer drift apart:
- media are stored as the portrait sheet with the orientation in the
rotation code (0/90/180/270; upside-down adds a half turn) instead of
swapped width/height with rotation limited to 0/180
- standard scales are written by their code (1:1 … 100:1) with matching
numerator/denominator; other scales as a readable custom ratio in the
layout's own paper unit, converting from the drawing's scale-family unit
(a metre drawing plotting "1:100" stores 10 mm = 1 unit, an inch layout
stores 1 in = 2540 units); reading converts back and keeps a ratio the
scale list has no name for instead of snapping to 1:1
- the layout's paper unit and every flag the dialog does not edit survive a
round trip untouched; layout limits follow the paper-space unit
- new drawings, new layouts, CLEAR and the automation "new" op share one
default page setup (canonical A4 name, rotation 90, none_device, 1:1
layout plot) through Scene::reset_to_new_drawing
Scene gains scale_family_unit_mm, scale_ratio and a scale-name ratio parser
(ratios and architectural names). Round-trip tests cover orientation,
standard/custom/fit scales, unit conversion, named-setup parity, preserved
flags and the default layout.
Co-Authored-By: Claude Opus 5 <[email protected]>
The toolbar Help button was a disabled tip that could never be clicked. It now opens a modal window explaining the manager on the web build: read-only reference list, disabled Attach/Refresh/Change Path (no filesystem access or native file pickers, so no add/reload/repath and no previews), nested read-only rows, and saved-drawing requirement for relative paths.
Includes a Report-an-issue button opening the GitHub issues page and a Close button; wired as ModalKind::XrefHelp through the shared modal frame so dismissal works on native and web.
The Snap and Grid tab showed static grid values with dead checkboxes, and every grid line stroked identically.
Grid X/Y spacing and Major-line-every are now editable inputs (validated 2-100 for majors, dirty-tracked, applied with an error message on bad input); Adaptive-grid and Display-beyond-Limits checkboxes are wired to live state. Every Nth line partitions into major_segments and strokes subtly brighter (1.5x alpha, 0.75px) for the reference hierarchy. GRIDMAJOR state persists to UserSettings. Covers partition, invalidation, and parse tests.
The viewport grid ignored the configured spacing and forced square grids: compute_grid_step hardcoded a 1.0 base, a single shared step drove both line families (including the tangent derivative used for gap measurement), and the display always clipped to LIMITS despite the beyond-Limits option.
Grid spacing now scales per-axis from GRIDUNIT via compute_grid_steps (adaptive 5x growth, fixed passthrough), GridParams carries step_x/step_y, snap tolerances follow the visible steps, and the LIMITS clip is skipped when beyond-Limits is set. Also fixes a per-axis overflow fallback that returned the X base for Y. Spacing state (X/Y, adaptive, beyond-Limits) is stored on the app and persisted to UserSettings at defaults; dialog wiring follows separately.
Comments and the Options help text describe the behaviour of commercial
solutions without naming any product. The command menu puts the command's
keywords directly under Enter / Cancel, with Recent Input and Snap
Overrides below them, so the choices that change from step to step are the
closest to the pointer.
Co-Authored-By: Claude Opus 5 <[email protected]>
The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.
ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.
Object snaps gain a one-shot "None" override. New strings in all locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Rows are 22 px (as the grip popup), the edit menu drops Select All and
Zoom Extents (both stay on the idle menu, matching the commercial solutions' edit menu),
and cursor-anchored panels now reserve the overlaid prompt lines
(CLIPROMPTLINES) as well as the input row, so a long menu is never hidden
behind the command area — it scrolls inside the visible canvas instead.
The automation port gains `pointer_right_press` / `pointer_right_release`
actions so scripts and MCP clients can exercise the context menu.
Co-Authored-By: Claude Opus 5 <[email protected]>
Every new UI string (menu rows, Options → Right-click Customization, the
PLINE sub-prompts and keyword labels, MOVE/COPY/OFFSET prompts) gets its
Fluent attribute in all 21 locales plus the source → attribute rows in
locale_catalog.rs; the SETVAR help line lists SHORTCUTMENU and
SHORTCUTMENUDURATION. Tests that compared prompt text now check command
state so they pass under any UI language.
Co-Authored-By: Claude Opus 5 <[email protected]>
A right-click while a grip is hot opens the grip menu: Enter places the
grip, Stretch / Move / Rotate / Scale / Mirror switch how the gripped
objects are edited (the latter four hand the selection to the matching
command with the grip as its base point), Base Point re-bases the gesture
at the next click, Copy leaves the originals in place and adds the moved
shapes as new entities while keeping the grip hot, Undo snaps the shapes
back to where the gesture started, Exit drops the edit.
The grip commit path moves out of the left-release handler into
`commit_active_grip_edit` so the menu, Enter and the placement click share
it; Enter with a hot grip now places it instead of repeating the last
command.
Co-Authored-By: Claude Opus 5 <[email protected]>
MOVE: Displacement, Enter at the second point uses the base as the vector.
COPY: Displacement, mOde (Single/Multiple), Undo of the last copy.
FILLET: Undo of the last fillet (the command refreshes its entity cache
through the new CadCommand::on_document_undone hook after the host undoes
the document step). CHAMFER: Multiple and Undo. OFFSET: Erase (the offset
replaces its source), Layer (Current/Source), Undo, Exit.
POLY3D, TRACE, MIRROR and MEASUREGEOM expose the keywords they already
accepted as options, so the context menu and option buttons list them.
The pinned prompt now keeps informational bracket groups such as
"[3 objects]" and only drops real option listings when the buttons take over.
Co-Authored-By: Claude Opus 5 <[email protected]>
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).
Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.
LINE gains options() (Close/Undo/eXit).
Co-Authored-By: Claude Opus 5 <[email protected]>
Show the styled dimension and its value while placing a dimension, using
the same builder the command commits with. Each creation command
(DIMLINEAR, DIMALIGNED, DIMANGULAR, DIMRADIUS, DIMDIAMETER, DIMARC,
DIMJOGGED, DIMORDINATE, DIMCONTINUE, DIMBASELINE, QDIM) reports the
dimensions it would commit at the current stage through
`CadCommand::dimension_preview`. The application applies the current
creation style, or the base dimension's style for DIMCONTINUEMODE=1,
and the same viewport measurement scale as commit, then tessellates the
transient entity through the normal dimension renderer.
While the second definition point is being acquired, a hovered model
snap supplies a provisional viewport scale; once both points are fixed,
hovering another viewport does not change the value. Angular dimensions
never receive length compensation. Degenerate geometry, an invalid
scale, or conflicting viewports fall back to the plain rubber-band
preview so no misleading value is shown.
Grid snap locks to SNAPUNIT instead of magnetizing; snapped 3D points keep elevation instead of flattening to z=0. New SnapTypes Vertex/EdgeMidpoint/FaceCenter/Knot/FacePerpendicular/NearestFace with their own F4 master toggle and mode set, tiers, and markers, fully independent of the 2D master. Solid B-rep corners/edge-midpoints/face-centers from mesh edges and kernel faces, spline knot points, and live perpendicular/nearest-to-face on mesh triangles merged priority-aware in move/click paths. Drafting Settings 3D Object Snap tab is fully live (was dead placeholders); Nearest-to-face off by default. TDD: behavioral LINE-to-solid tests plus engine/scene unit tests.
Properties… next to the printer used to open the CUPS web interface in a
browser. It now edits the driver options of the *selected* printer the
way LibreOffice's Properties… does, without leaving the plot dialog:
- CUPS platforms (Linux, any desktop; macOS): an in-line editor lists the
printer's PPD options as `lpoptions -l` reports them — media type,
colour mode, quality, duplex, trays, scaling — with readable choice
labels, Reset / Cancel / Apply. Apply keeps only the choices that differ
from the driver defaults, per printer, in the plot config, and every job
for that printer passes them as `lp -o key=value`. Where CUPS cannot
answer, the desktop's printer settings panel opens instead of a browser.
- Windows: the driver's document-properties sheet (`DocumentPropertiesW`
with prompt, owned by the main window) and, on OK, the result stored as
the user's printing preferences for that printer (`SetPrinter` level 9),
which the job honours. `printui /e` (printing preferences) replaces the
device-properties sheet as the fallback.
The desktop print portal was tried first and dropped: GTK 4's print
dialog loses the preselected printer when the default queue is listed
before it, so the dialog always opened on the wrong printer.
Dialog layout: the modal grows to 940×620; Printer / plotter and Paper
size share a line with their pickers (long queue and media names now fit);
Copies + Properties… and Custom… sit beneath; the custom-sheet editor
labels each margin (Left / Right, Top / Bottom) and shows the unit.
Also recognises `none_device`, AutoCAD's stored spelling for "no plotter",
and writes it back unchanged.
Tests: `lpoptions` parsing and keyword humanising, the editor flow (load,
stale answer ignored, set, apply, remember, reset, error, cancel), device
name round-trips including `none_device`.
Co-Authored-By: Claude Opus 5 <[email protected]>
AutoCAD lets a plotter configuration carry user-defined sheets; a drawing
then names them like any other media (`Roll_24_(609.60_x_1500.00_MM)`).
The plot dialog now defines such sheets inline, under the Size row:
name, width/height, unit, and the printable margins in that unit. Added
sheets are selected at once, offered for every device after the device's
own list, remembered in the plot config across sessions, and written to
the layout with their own margins (a printer that reports the same size
still wins with its hardware margins). A selected user-defined sheet can
be removed; the sheet itself stays selectable in the drawing that uses it.
`CustomPaper` / `Margins` live in the paper catalogue with serde support;
`PlotDevice::margins_mm` consults the user's definitions. The Plot
dialog's form helpers (button and field styles, dividers, `label :
control` rows) move to `ui::style::form` so the next dialogs share them
instead of copying.
Tests: draft validation and seeding, catalogue naming of user sheets,
device margins with user definitions, and dialog round-trips (add,
select, persist, write, replace, remove, refuse an invalid size).
Co-Authored-By: Claude Opus 5 <[email protected]>
Replace the provisional PDF margins with the values AutoCAD's Plotter
Configuration Editor lists for `DWG To PDF.pc3`. They depend on the sheet
family and variant, not the size: ISO sheets 5/17/6/18 mm (left, bottom,
right, top), ISO expand 5/10/6/11 mm, ISO full bleed 0/1/0/1 mm; ANSI and
ARCH sheets 0.23/0.70 in, expand 0.23/0.42 in, full bleed 0.03 in all
round. Inch sets are stored in millimetres like the sheet itself.
Co-Authored-By: Claude Opus 5 <[email protected]>
Helen Kwok