Paper-space hit testing only sees sheet entities, so DIMLINEAR / DIMALIGNED /
DIMRADIUS / DIMDIAMETER / DIMANGULAR in "select object" mode found nothing
when the user clicked the model geometry a viewport displays.
A pick that lands inside a content viewport is now mapped into model space
through the viewport frame and tested against that viewport's resident model
wires - the same tessellation it draws, so the pick matches what the user
sees. Ordinary block instances are descended into, with the instance
transform (recursively, up to eight levels) baked into the extracted
geometry, so a line inside a block measures its placed length.
The picked entity is handed to the command already projected onto the sheet,
so all five commands keep working entirely in paper coordinates and unchanged;
the pick is recorded as a viewport snap, so the committed dimension is
compensated exactly like a point-input one. A miss falls through to the
ordinary paper-space pick.
Also narrows mixed-space classification to the measuring points: the final
click of each of these commands is the dimension-line placement, which lands
on bare sheet for viewport measurements and inside a viewport rectangle for
paper ones, and says nothing about what is being measured.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Paper-space commands could not pick model geometry displayed by a layout
viewport: `hit_test_wires` deliberately excludes viewport content in PSPACE,
and that has to stay true for selection. This adds the capability as a separate
query rather than by changing those semantics.
`OpenCADStudio::paper_viewport_snap` walks the current layout's displayed
content viewports top-most first, skips those whose display is off or whose
clip boundary excludes the cursor, and for each one runs the EXISTING snap
engine against that viewport's model wires using the viewport's own camera and
screen rectangle (`viewport_edit_frame_for`). The accepted model point is
mapped back onto the sheet with `ViewportFrame::model_to_paper`, so everything
downstream keeps working in paper coordinates — LINE still draws at the
projected paper point. Grid snap and the paper-space rubber-band origin are
suppressed for that pass; results outside the clip are rejected so no snap
lands on a clip cut. Locked viewports snap like unlocked ones.
No projected geometry is rebuilt per pointer event: the wire set is the
renderer's resident per-viewport Arc (`model_wires_for_viewport_arc`) and the
broad phase reuses the shared interaction index over it.
The result is merged with the ordinary paper-sheet snap by `snap::merge_snap`,
which applies the engine's own priority-then-distance rule, in both the
cursor-move and the click paths.
`SnapResult` gains Copy fields `viewport: Option<Handle>` and
`source: Option<DimensionAssociationSource>`; the engine fills `source` from
the owning wire wherever it knows it. `AcceptedSnap::from_snap` converts a
result plus frame into the shared PR2/PR3 contract type.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Constraint delete: a Properties-panel row delete button, viewport
click-to-select on a constraint glyph pill with Delete-key support, and a
right-click "Delete Constraint" menu item — all routed through one
undoable Scene::selected_constraint-aware path.
Fixes two named-parameter bugs found while testing that feature:
- DIMCONSTRAINT: a parameter named like a mode-switch keyword ("r", "d",
"a", "x", "y") could never be referenced, since the keyword check ran
before the parameter-name check.
- PARAMETERS modal Apply rebuilt Scene::named_parameters but never
refreshed the Properties panel, leaving renamed/deleted rows stale
until an unrelated refresh (e.g. a selection change) happened to occur.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Entities that carry the standard PE_URL XDATA record (what HYPERLINK writes)
can now be followed from the canvas: Ctrl+click opens the link in the system
browser and consumes the click, so no box/lasso selection starts.
- scene::selection::pe_url_of() reads the record with the same rule as the
Properties panel hyperlink field; unit-tested.
- The ViewCube/compass hit region wins over a hyperlink drawn beneath it.
- Unchanged behaviour when Ctrl is not held or the entity has no link.
Brings in 54 commits from origin/main: a selection-performance overhaul,
surface thickening, GPU-native wide/tapered stroke rendering, continued
ocs_doc_api evolution, and assorted fixes/polish (block double-click
editing, DWG hatch/database repair, clipboard, collapsible Properties
sections).
Six real conflicts, all where this branch had independently re-applied
a fix upstream later revised or already carried natively:
- src/app/automation.rs, src/app/command_driver.rs: combined both
sides — kept this branch's sketch-constraint/named-parameter loading
on "new"/"open", adopted main's Scene::clear()/material_base_dir and
its newer rebuild_derived_caches() over the older bump_geometry().
Scene::clear() (src/scene/entity.rs) now also resets
sketch_constraints/named_parameters, so every caller gets this for
free instead of each call site repeating it.
- src/io/mod.rs, src/scene/render_graph.rs: adopted main's design
outright (commit 973af87d, authored by Hakan directly) — a large
MINSERT is no longer purged as "corrupt" at load, only its rendering
is bounded, preserving the source data. This branch's own earlier
design (reject at load) predates that revision.
- src/scene/pipeline/mesh_gpu.rs: adopted main's valid_rgba_size()
guard (a real robustness improvement over this branch's version).
- src/snap.rs: replaced wholesale with main's version — this branch's
copy was an explicit verbatim snapshot from an earlier upstream PR
(commit 4c264b8c) with zero constraint-system-specific content, and
main has since evolved it considerably further.
Also removed two now-dead duplicates the merge surfaced without a
conflict marker (both branches had independently fixed the same
things): the OPTIONS/OP command dispatch/autocomplete entries, and
automation.rs's open_finalizes_and_purges_like_the_ui_open_path test
(kept main's version, which covers strictly more: solid_models/
material_base_dir reset on "new").
Full workspace suite passes (812 lib tests + this branch's own 24
constraint/persistence integration tests) except the one pre-existing,
unrelated font-test failure already present on main. Zero clippy
findings in the hand-written merge resolution itself; the ~1,171
warnings clippy reports are pre-existing in the 54 absorbed commits,
not introduced here.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
The ten strings the Options card gained were English in nineteen of the
twenty-one locales. They are now translated in all of them, using the words
each locale already uses for the surrounding labels — de-DE "Griffe",
fr-FR "Poignées", zh-CN "夹点", zh-TW "掣點" and so on for grips, and the
same for selection, preview and object. System-variable names stay in Latin
uppercase, as they already do in every locale's SETVAR listing.
Composing them from existing keys, the way el-GR composes the neighbouring
labels, only worked for one of the ten: there is no existing key for "limit",
"unlimited", "shift", "rectangle" or "lasso", and "Grips: Objects" as the
label of a numeric limit would read worse than English.
The rollover preview was reported as possibly not working. It works, and now
says so: `the_idle_rollover_follows_bit_one` drives a settled hover over a
line and checks what the scene highlighted, for all four values of the
bitmask. Bit 1 alone highlights, bit 2 alone does not, both do, neither does
not. That is the assertion the inverted config comment would have made
someone doubt — the pick simply needs the cursor still for the 500 ms of
`HOVER_DWELL_MS` before it runs.
Co-Authored-By: Claude Opus 5 <[email protected]>
Resolve curve intersections through cadkernel, retain empty exact results, gather analytic candidates independently of tessellation, and bound material uploads. Preserve large MINSERT data while limiting rendering work; remove obsolete review narratives.
`hit` was one number covering five things: resolving candidate handles, the
wire box test, two hatch tests and two mesh tests. `select-commit` now
reports them apart, which immediately reframed the problem — at 186 468
entities the wire box test is 55 ms of 206, the hatch tests are 103, and
handle resolution is 47.
Two changes alongside it, both in the crossing scan.
Skipping a wire already in the selection was keyed by hashing its name, once
per triangle and once per glyph inside the box. A bitmap over wire indices
answers the same question with an array index. The name set stays behind it,
because several wires can share one entity's name and the output dedups by
name; a wire whose name is already in that set now gets tested once more
before being dropped, which costs one projection and changes no output.
The degenerate-wire loop that ends both the box and the lasso scans tested
`seen.contains(wire.name)` before the structural tests beside it. `||`
short-circuits, so with the name lookup last a wire with two or more points —
very nearly all of them — is dropped without hashing anything. That loop
walks every candidate, so it was one string hash per wire in the box.
A window over a whole drawing spent 407 ms gathering candidates and 259 ms
testing them, of 825 ms total, at 186 468 entities.
**Gathering** ran eight spatial queries because that is what hover and
snapping need between them. An area selection reads five: the wires and their
segments, plus the fill triangles, pick triangles and glyphs that
`indexed_box_crossing_hits` uses to catch hatches and text inside the box.
The three that exist only for snapping are skipped.
That was worth 148 ms. The rest came from the queries themselves.
`SpatialGrid::query` sorts its result twice — once over the entry indices, to
remove the repeats an entry collects for spanning several cells, and once
over the values. Over a box covering the drawing that is two O(n log n)
passes across 4.4 M elements to remove a handful of duplicates.
`query_unordered` returns the same set in cell order with the duplicates left
in, and reserves the space it needs instead of growing a 17 MB vector in
steps. Gathering went from 515 ms to 69 ms on a synthetic set at that size,
and from 407 ms to 27-40 ms in the application.
Everything an area selection does with the result already dedups and does not
read the order. Click picking keeps the sorted `query`, where scan order
decides which of two overlapping entities a click lands on.
**Testing** projected both endpoints of every segment in the box, then threw
the result away for any wire already selected. A circle or a polyline
contributes one segment per tessellated span, so at 24 spans per wire that is
23 projection pairs out of 24 doing nothing. Skipping a wire once it is in
took a 4.4 M-segment scan from roughly a second to 42 ms.
The overlay path — active after any edit, so most of a working session —
needed the same treatment, including its own merge: `extend_indexed` sorts
and dedups every category, which would have put back the sorts this removes.
`extend_indexed_area` keeps the dedup on `wire_indices`, and must: the window
branch of `box_hit` walks it directly, so a wire left in twice would be
selected twice.
Tests cover the equivalence in both directions: the area query matches the
full one as a set in every category an area selection reads, and the merge
dedups `wire_indices` and nothing else.
Selecting a whole drawing was unusable on a 186 468-entity file. Four costs
scaled with the selection where they did not have to.
Every selected handle triggered a walk of the entire document to find LEADERs
pointing at it. On the file this came from, selecting 471 583 entities in a
585 786-entity drawing did not finish inside eight minutes. A reverse index
built once per geometry epoch answers the same question; a test asserts it
returns exactly what the walk returned, including the case of two leaders on
one annotation.
Group expansion asked the selection about every group: for each selected
handle it scanned each group's own member list. Asking each group once
whether it holds anything selected turns that around.
Selecting and deselecting went one entity at a time, and `deselect_entity`
rebuilt the ordered list with a `retain` per handle, so removing N of M
walked the order list N times. Both now take a slice.
Grips were built for every selected entity. AutoCAD stops at GRIPOBJLIMIT,
and the DWG header does not carry the variable, so its default of 100 stands
in for it.
The remaining two commits are measurement: `select-commit` reports the phases
of a selection separately, which is what showed the bulk paths had been added
to the press-drag branch while a click-move-click window goes through a
different one entirely.
Ports FreeCAD's planegcs 2D geometric constraint solver to Rust as a new
crates/ocs_gcs workspace member, and wires it into the document/scene model
as a persistent SketchConstraintSet: Coincident, Horizontal/Vertical,
Parallel/Perpendicular, Equal, Tangent, Distance, Angle and Radius
constraints that re-solve live (including mid-drag, not just on release),
render glyphs and a DOF badge, flag conflicts with a one-click resolver
pill, and round-trip through save/load via an XRecord blob.
Also includes docs/command_reference.md (a statically generated reference
of every registered command and its prompt sequence) and
docs/named_parameters_design.md + docs/backlog.md, which hand off the next
queued feature (a named-parameter/expression table) and consolidate every
deliberate scope-down and open gap found along the way, so a fresh session
has a complete starting point.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Switching to a Layout re-tessellated the whole model — `memo_miss=186455`,
2034 ms — to arrive at geometry identical to what was already in the memo.
The only thing that differed was colour.
`local_wires_for` already knows this: it stores the raw colour and drops
its background argument with `let _ = bg_color;`, noting that
`Batches::finalize` applies `adapt_to_bg` last, "so the cache no longer
has to rebuild on BACKGROUND / layout-switch". The tessellation memo's
guard had not been told, and still mixed the background in, so every
entry was discarded on a switch.
`finalize` now records what its colour resolution consumed — the raw
colour, the raw glyph colours, and the three flags it branches on — as
`WireModel::bg_adapt`, and `resolve_colors_for_bg` replays it for another
background. The guard drops the background, so a memo entry serves any
layout.
The resolution recomputes from the recorded raw colour rather than from
the resolved one, which makes it idempotent and therefore safe over a set
that mixes memo hits with freshly tessellated misses. Re-adapting the
resolved colour would not be safe: `adapt_to_bg` snaps a near-white colour
to pure black on a light background, and pure black comes back pure
*white* on a dark one, losing the tint. A test pins that asymmetry so the
raw colour is not optimised away later.
The contract is tested against the real `finalize` rather than a copy of
its logic: for every background pair, building under one and resolving for
the other lands exactly where building under the other would have.
`bg_adapt` is `None` for wires built anywhere else, and the resolution
skips them, so nothing outside the block cache changes colour. It is also
`None` when the resolution would be a no-op — a preserved colour with no
canvas fill looks the same under every background — which keeps the common
case at no cost.
Ordering is unchanged: the pass runs inside the builder, before
`append_scene_markers` and `apply_refedit_fade`, both of which have their
own separate background dependency.
`wires-build` gains `colors=` so the pass has a number of its own.
Co-Authored-By: Claude Opus 5 <[email protected]>
Switching to a Layout stops the main thread long enough that the
compositor decides the application has stopped responding and offers to
kill it. The switch itself is not the problem — `layout-switch` reports
about 10 ms — it is the frame after it, which rebuilds the whole wire set.
That frame now has a cheap one in front of it. `layout_settling` is set
when the switch takes, and while it holds, the viewport is replaced by a
centered "Preparing layout…" on the canvas background. No shader widget
means no scene primitive, so `prepare` has nothing to do and the frame
costs nothing. A `window::frames` subscription clears the flag, which is
the guarantee this needs: that callback runs once a frame has actually
been presented, so the notice is on screen and the compositor has been
answered before the expensive frame starts.
The deferral is of the *frame*, not the switch. Two callers depend on the
switch having completed when it returns — one calls `fit_all` immediately
after, another compares `current_layout` — so deferring the switch itself
would have broken both.
This restarts the compositor's timer immediately before the slow frame and
replaces a stale window with something that says what is happening. It
does not make the slow frame fast: if the rebuild still exceeds the
compositor's timeout the dialog can return, and the durable fix is the
2 s `memo_miss` behind it, which is a separate change.
Only `en-US` is validated against at build time; Greek is filled in too
since it is in use here, and the rest fall back until translated.
Co-Authored-By: Claude Opus 5 <[email protected]>
Refresh stale depth bounds after geometry edits, allow orbiting through camera poles, and preserve hidden-line occlusion for selected solids.\n\nFixes #957
Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
Christopher Overbeck