Fusion Black pairs near-black chrome with a paper-white canvas, so the
drawing is the only bright thing on screen. That breaks the assumption
in theme_canvas_background that the canvas follows the chrome, hence
the explicit lookup: falling through to the palette would paint model
space black and undo the point of the theme.
Both keep a blue accent rather than going fully greyscale. Selection
highlight defaults to the theme primary, and a white primary would be
invisible against a white canvas.
These are Theme::Custom values and so are absent from iced's
Theme::ALL. all_themes() is the list to enumerate from now; the picker
in the options dialog uses it, and parse_theme_name resolves both by
name.
The toolbar Help button was a disabled tip that could never be clicked. It now opens a modal window explaining the manager on the web build: read-only reference list, disabled Attach/Refresh/Change Path (no filesystem access or native file pickers, so no add/reload/repath and no previews), nested read-only rows, and saved-drawing requirement for relative paths.
Includes a Report-an-issue button opening the GitHub issues page and a Close button; wired as ModalKind::XrefHelp through the shared modal frame so dismissal works on native and web.
The Snap and Grid tab showed static grid values with dead checkboxes, and every grid line stroked identically.
Grid X/Y spacing and Major-line-every are now editable inputs (validated 2-100 for majors, dirty-tracked, applied with an error message on bad input); Adaptive-grid and Display-beyond-Limits checkboxes are wired to live state. Every Nth line partitions into major_segments and strokes subtly brighter (1.5x alpha, 0.75px) for the reference hierarchy. GRIDMAJOR state persists to UserSettings. Covers partition, invalidation, and parse tests.
The viewport grid ignored the configured spacing and forced square grids: compute_grid_step hardcoded a 1.0 base, a single shared step drove both line families (including the tangent derivative used for gap measurement), and the display always clipped to LIMITS despite the beyond-Limits option.
Grid spacing now scales per-axis from GRIDUNIT via compute_grid_steps (adaptive 5x growth, fixed passthrough), GridParams carries step_x/step_y, snap tolerances follow the visible steps, and the LIMITS clip is skipped when beyond-Limits is set. Also fixes a per-axis overflow fallback that returned the X base for Y. Spacing state (X/Y, adaptive, beyond-Limits) is stored on the app and persisted to UserSettings at defaults; dialog wiring follows separately.
Comments and the Options help text describe the behaviour of commercial
solutions without naming any product. The command menu puts the command's
keywords directly under Enter / Cancel, with Recent Input and Snap
Overrides below them, so the choices that change from step to step are the
closest to the pointer.
Co-Authored-By: Claude Opus 5 <[email protected]>
The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.
ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.
Object snaps gain a one-shot "None" override. New strings in all locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Rows are 22 px (as the grip popup), the edit menu drops Select All and
Zoom Extents (both stay on the idle menu, matching the commercial solutions' edit menu),
and cursor-anchored panels now reserve the overlaid prompt lines
(CLIPROMPTLINES) as well as the input row, so a long menu is never hidden
behind the command area — it scrolls inside the visible canvas instead.
The automation port gains `pointer_right_press` / `pointer_right_release`
actions so scripts and MCP clients can exercise the context menu.
Co-Authored-By: Claude Opus 5 <[email protected]>
MOVE: Displacement, Enter at the second point uses the base as the vector.
COPY: Displacement, mOde (Single/Multiple), Undo of the last copy.
FILLET: Undo of the last fillet (the command refreshes its entity cache
through the new CadCommand::on_document_undone hook after the host undoes
the document step). CHAMFER: Multiple and Undo. OFFSET: Erase (the offset
replaces its source), Layer (Current/Source), Undo, Exit.
POLY3D, TRACE, MIRROR and MEASUREGEOM expose the keywords they already
accepted as options, so the context menu and option buttons list them.
The pinned prompt now keeps informational bracket groups such as
"[3 objects]" and only drops real option listings when the buttons take over.
Co-Authored-By: Claude Opus 5 <[email protected]>
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).
Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.
LINE gains options() (Close/Undo/eXit).
Co-Authored-By: Claude Opus 5 <[email protected]>
Grid snap locks to SNAPUNIT instead of magnetizing; snapped 3D points keep elevation instead of flattening to z=0. New SnapTypes Vertex/EdgeMidpoint/FaceCenter/Knot/FacePerpendicular/NearestFace with their own F4 master toggle and mode set, tiers, and markers, fully independent of the 2D master. Solid B-rep corners/edge-midpoints/face-centers from mesh edges and kernel faces, spline knot points, and live perpendicular/nearest-to-face on mesh triangles merged priority-aware in move/click paths. Drafting Settings 3D Object Snap tab is fully live (was dead placeholders); Nearest-to-face off by default. TDD: behavioral LINE-to-solid tests plus engine/scene unit tests.
Properties… next to the printer used to open the CUPS web interface in a
browser. It now edits the driver options of the *selected* printer the
way LibreOffice's Properties… does, without leaving the plot dialog:
- CUPS platforms (Linux, any desktop; macOS): an in-line editor lists the
printer's PPD options as `lpoptions -l` reports them — media type,
colour mode, quality, duplex, trays, scaling — with readable choice
labels, Reset / Cancel / Apply. Apply keeps only the choices that differ
from the driver defaults, per printer, in the plot config, and every job
for that printer passes them as `lp -o key=value`. Where CUPS cannot
answer, the desktop's printer settings panel opens instead of a browser.
- Windows: the driver's document-properties sheet (`DocumentPropertiesW`
with prompt, owned by the main window) and, on OK, the result stored as
the user's printing preferences for that printer (`SetPrinter` level 9),
which the job honours. `printui /e` (printing preferences) replaces the
device-properties sheet as the fallback.
The desktop print portal was tried first and dropped: GTK 4's print
dialog loses the preselected printer when the default queue is listed
before it, so the dialog always opened on the wrong printer.
Dialog layout: the modal grows to 940×620; Printer / plotter and Paper
size share a line with their pickers (long queue and media names now fit);
Copies + Properties… and Custom… sit beneath; the custom-sheet editor
labels each margin (Left / Right, Top / Bottom) and shows the unit.
Also recognises `none_device`, AutoCAD's stored spelling for "no plotter",
and writes it back unchanged.
Tests: `lpoptions` parsing and keyword humanising, the editor flow (load,
stale answer ignored, set, apply, remember, reset, error, cancel), device
name round-trips including `none_device`.
Co-Authored-By: Claude Opus 5 <[email protected]>
AutoCAD lets a plotter configuration carry user-defined sheets; a drawing
then names them like any other media (`Roll_24_(609.60_x_1500.00_MM)`).
The plot dialog now defines such sheets inline, under the Size row:
name, width/height, unit, and the printable margins in that unit. Added
sheets are selected at once, offered for every device after the device's
own list, remembered in the plot config across sessions, and written to
the layout with their own margins (a printer that reports the same size
still wins with its hardware margins). A selected user-defined sheet can
be removed; the sheet itself stays selectable in the drawing that uses it.
`CustomPaper` / `Margins` live in the paper catalogue with serde support;
`PlotDevice::margins_mm` consults the user's definitions. The Plot
dialog's form helpers (button and field styles, dividers, `label :
control` rows) move to `ui::style::form` so the next dialogs share them
instead of copying.
Tests: draft validation and seeding, catalogue naming of user sheets,
device margins with user definitions, and dialog round-trips (add,
select, persist, write, replace, remove, refuse an invalid size).
Co-Authored-By: Claude Opus 5 <[email protected]>
A page setup names its plotter, and AutoCAD looks that name up in its own
configurations: `DWG To PDF.pc3` for PDF output, the spooler name for a
system printer, `None` when nothing is assigned. Drawings saved here used
to carry the dialog's label ("Save to PDF file…"), so AutoCAD reported a
missing device on every layout plotted to PDF from Open CAD Studio.
- New `io::plot_device`: `PlotDevice { None, Pdf, Printer }` with AutoCAD's
spellings, a reader for stored names that keeps any plotter
configuration AutoCAD wrote (an HP `.pc3`, `DWF6 ePlot.pc3` — plotted to
PDF here but preserved for AutoCAD) and upgrades the legacy label.
- Printable areas: the PDF driver's margins per sheet variant (full bleed
edge to edge; standard / expand insets provisional until read off
AutoCAD's plotter configuration), and for CUPS printers the media and
margins the queue reports over IPP (`ipptool` `media-col-database`),
parsed once per printer and cached. Windows enumeration follows with
native GDI printing.
- Page setups now store the device in AutoCAD's spelling and the margins
of the chosen device/sheet, keeping the drawing's own values while
neither changed (AutoCAD's `PAPERUPDATE` behaviour). The paper-space
printable-area rectangle follows.
- Plot dialog: the default entry names the printer it resolves to; a
printer that answered lists its own sheets with a note; the media query
runs in the background and answers for a since-deselected printer are
dropped.
Tests: device names, stored-name resolution, PDF margin table, IPP media
parsing (sizes, margins, borderless folding, default sheet), PWG names,
plus dialog ↔ layout round-trips for PDF, legacy label, preserved plotter
configuration, sheet change → margins, and printer selection.
Co-Authored-By: Claude Opus 5 <[email protected]>
AutoCAD stores a layout's sheet as the plotter driver's canonical media
name (`ISO_A4_(210.00_x_297.00_MM)`, `ANSI_full_bleed_B_(11.00_x_17.00_Inches)`),
so a drawing saved here has to carry the same spelling for AutoCAD to find
the sheet in its DWG To PDF list, and a name that arrives from AutoCAD must
resolve to its dimensions and go back out untouched.
- New `io::paper_catalog` replaces the eight-entry `paper_sizes`: ISO A/B,
ANSI, ARCH (incl. E1) and JIS series with full-bleed / expand variants,
Letter / Legal / Tabloid, millimetre and inch units, a parser that
reconstructs any well-formed AutoCAD name (custom or driver-specific)
from its embedded dimensions, driver / legacy-config aliases (`A4`,
`Letter`, `Ledger`), and dimension matching that prefers the plain sheet.
- The Plot dialog stores the canonical name and shows the sheet as
`ISO A4 (210 × 297 mm)`; a sheet that only exists in the drawing is
listed first so it stays selectable.
- A sheet the user did not change keeps the drawing's own media name
(`paper_name_for_settings`), so a Windows printer's `A4` is not rewritten
to `ISO_A4_(…)` just by passing through the dialog.
- Drops the unused `PlotFormat` / `PlotOrientation` messages,
`paper_label_from_dims`, and three duplicated `match "A4" | …` tables.
Tests: catalogue spelling, parser round-trip, aliases, dimension matching,
display formatting, plus dialog ↔ layout round-trips for driver-named,
catalogue and unknown sheets.
Co-Authored-By: Claude Opus 5 <[email protected]>
Drafting Settings dialog gets text inputs for Snap X/Y spacing plus a working Equal X and Y checkbox (mirrored inputs, Y follows X on apply). Snapper gains fixed snap_spacing_x/y (persisted in UserSettings, default 10) decoupled from the adaptive visible-grid step. Grid snap no longer aperture-gated: with Snap On it rounds every point to the grid, object snaps still override by tier. Adds parse/lock regression tests.
- IMAGEEMBED: pack raster images into OLE2FRAME entities so a .dwg is
self-contained; 'Embed Image' entry in the XREF attach menu; control/MCP
op embed_image for external tools; dxf_name for OLE2FRAME queries.
- Scene: populate_images_from_document now rebuilds OLE2FRAME and PDF
underlay models too (they used to vanish after any XREF op).
- Printing: add PRINTER_ENUM_NETWORK pass when listing printers; GDI
spooler fallback (hayro raster at 300 DPI + StretchDIBits) for hosts
whose PDF handler registers no print verb; DEVMODE orientation with a
90-degree raster rotation fallback for v4 drivers; fix the fit-scale
precedence bug that printed blank pages.
- PDF export dialogs on Windows use the async file dialog so the native
overwrite confirmation no longer deadlocks the UI thread.
- Plot dialog: persist the chosen printer (saved on selection) and the
picked plot window across sessions; page setups with no device no
longer reset the output device.
- Community fonts: detect unresolvable .shx references on open and offer
a download from the repository's fonts/ folder (contribution guide in
fonts/README.md); custom font source URL setting for intranet font
servers; downloaded fonts resolve from the per-user fonts directory.
Port press-to-capture dialog safeguards to the alias editor: transient top draft row with explicit accept, duplicate-alias and unknown-command danger styling plus persistent banners, reset-to-defaults with inline confirmation, Apply and Apply-and-Exit, alias count, Esc-cancels-draft-first, and unsaved-changes guard on close.
Each menu row is now a single mouse_area that publishes on PRESS instead of a button nested in a mouse_area. iced_aw ContextMenu keeps its overlay element in the widget struct, so every view rebuild wipes the overlay subtree state - including a button's is_pressed between press and release - and release-time clicks published nothing. Headless simulator tests through the real overlay guard row clicks, flyout clicks, the Change Path Type hover trigger, and pin the subtree-reset mechanism. Requires iced_test as a dev-dependency; the Cargo.lock gpu-allocator/windows edge is pinned back to 0.62.2 (see docs/review-context-menu-click-delivery.md).
Row menu Select New Path and Find and Replace now act on the right-clicked row via dedicated XrefRowPathPick / XrefRowFindReplacePrompt messages (prefill + command-line focus, XOPEN output included). Rows use a RightClickArea wrapper so right-click selects the row even though ContextMenu captures the press, and opening or acting on the menu resets the Change Path Type flyout state.
The Change Path Type row shows a right-triangle affordance and reveals the Make Absolute / Make Relative / Remove Path submenu beside it. The flyout opens on hover only and a shared submenu-row style removes dead code from the earlier iterations.
Row right-click menu is exactly Open, Attach..., Unload, Reload, Detach, Change Path Type group with Make Absolute, Make Relative, Remove Path, Select New Path, Find and Replace. Change Path Type renders as indented group. Open uses OCS for DWG and OS default for images and PDFs. Preview decodes on selection change, not only at refresh. Details shows placed display width and height for image instances.
External References dock default 360 to 460 for the column-rich table. Attach split button reads Attach DWG with Attach Image and Attach PDF options, all menu rows full width. List view shows one distinct glyph and theme color per reference status.
Right-click actions bound to the row under the cursor, split-button toolbar groups with shared borders and hover states, and a notice when an operation needs a selection first.
Path normalization with stable keys, relative/absolute/none pathtypes, wildcard matching, and reference entries with loaded, stale, missing, and unreferenced states.
Matus Mastena