Use SELECTOR_PAD_V (calculated from ROW_H and FONT_SZ) instead of
hardcoded [3, 6] padding for color selector buttons. This matches the
padding used by combo_box widgets for Lineweight and Linetype,
ensuring all three ByLayer dropdowns align vertically and have
consistent height.
Fixes#1047
Co-authored-by: Copilot <[email protected]>
Use atomic file operations (write to temp file, then rename) instead of
direct File::create() to avoid crashes when the target PDF is locked by
another process (e.g., open in PDF reader). The new write_pdf_atomically()
function ensures the file is either fully written or left unchanged, with
a clear error message if the file is in use.
Fixes#1062
Co-authored-by: Copilot <[email protected]>
- Multiverwijslijn → Multiverwijs Lijn (proper spacing)
- Multiline → Multilijn Tekst (better clarity)
- Unie → Samenvoegen (more accurate for boolean union)
- Aftrekken → Verschil (better term for boolean subtract)
These terms align better with Dutch CAD industry standards.
Co-authored-by: Copilot <[email protected]>
Replace Wrapping::WordOrGlyph with Wrapping::Word to prevent labels
like 'Dimensions' from breaking as 'Dimensio' + 'ns'. Word-only wrapping
ensures labels only wrap at word boundaries.
Fixes#1046
Co-authored-by: Copilot <[email protected]>
Handling a document-open Apple Event (a warm "Open With" while the app
is already running) silently promotes this process from
NSApplicationActivationPolicyAccessory to a normal foreground app —
confirmed with lsappinfo, not assumed: its own entry flips from
type="UIElement" to type="Foreground" the instant it handles a second
Apple Event (a cold launch's own first event doesn't trigger this).
That gave the launcher its own, contentless Dock icon sitting next to
the real editor's, both apparently "the same app" to the user but
actually two separate Dock entries.
Re-set Accessory explicitly right after relaying, in the one place
every open (cold fallback, document open, and reopen-while-running)
already funnels through.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Quitting the real GUI binary (Cmd+Q) leaves the launcher itself still
running — that's by design, so it can keep relaying opens for the
session. But reopening the app afterward (Dock icon, double-clicking
it in Finder again) reactivates that same long-lived launcher process
rather than triggering a fresh cold launch, since Launch Services
still considers the bundle running. Neither of the delegate methods
already handled covered that: applicationDidFinishLaunching: only
fires once, at the launcher's own original cold start, and
application:openURLs: only fires when a document was named. The net
effect: the Dock icon would appear, but no window ever showed.
applicationShouldHandleReopen:hasVisibleWindows: is exactly the
callback AppKit fires for this reactivation case. Reproduced and
verified the fix against the real sequence (cold launch, kill only the
GUI process to simulate Cmd+Q, reopen) rather than assuming it from
the delegate method's docs alone.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
The previous commit's Apple Event handler only ever catches an open
sent to an already-running process. A cold double-click (app not
running yet) still failed: every registration point tried inside the
real binary — before app::run(), on the Subscription's first poll,
even the literal first statement of main() — reliably caught a warm
open but never the original cold-launch event. A raw
AEInstallEventHandler in a separate, minimal, non-AppKit process (no
winit/iced, just a manual CFRunLoopRunInMode pump) still missed it
too, ruling out "the real binary's heavy dependency graph loading
before main() wins the race" as the explanation.
What does reliably catch a cold launch, verified against real
Finder-equivalent opens: a from-scratch NSApplication with its own
delegate implementing application:openURLs: — in a process where we
own setDelegate: from the start, with no contention over the single
delegate slot winit already claims. That has to be a separate process
from the real GUI binary (only one -[NSApplication run] call can own a
process), so src/bin/ocs_launcher.rs is now the .app's actual
CFBundleExecutable: a small, dependency-light binary (no iced, wgpu,
or cadkernel) whose only job is to catch the open and relay it.
Relaying by replacing this process's image (exec, same PID) or by
spawning a child and exiting turned out to both be dead ends: Launch
Services tracks "the running instance of this bundle" by the
Application Serial Number it handed out to whichever process it
actually launched — this launcher, not whatever it execs into or
spawns. Once the launcher's own ASN stopped pointing at a live,
listening process, every later open Finder tried to deliver silently
went nowhere (measured with lsappinfo against a real second "Open
With", not assumed). So the launcher now stays running for the app's
session — invisible, via NSApplicationActivationPolicyAccessory, since
it owns no window — and relays every open (cold or warm) over the same
channel a second CLI invocation already uses: io::single_instance.
That relay only worked once single_instance's rendezvous key stopped
being computed from the running executable's own path. That was fine
when one binary always did the job, but the launcher and the real
binary are different executables and independently computed different
ports, so they could never find each other. Anchor the key on the
enclosing .app bundle instead, shared by both.
packaging/build_macos_signed.sh and .github/workflows/release.yml now
build ocs_launcher and place it at Contents/MacOS/OpenCADStudio (the
CFBundleExecutable Info.plist already names), with the real GUI binary
renamed to Contents/MacOS/OpenCADStudio-App alongside it.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Double-click / "Open With" never puts the file on argv — Finder always
delivers it as a kAEOpenDocuments Apple Event instead, which nothing in
this app listened for, so it just showed "cannot open files in this
format" even though the file association itself was registered
correctly.
The standard fix, implementing application:openURLs: on this app's own
NSApplicationDelegate, isn't available here: winit already installs
its own delegate to own window/lifecycle events, NSApplication has
exactly one delegate slot, and winit's class doesn't implement the
open-document method.
This bypasses the delegate protocol and registers directly with the
lower-level Apple Event Manager (AEInstallEventHandler) instead — the
same mechanism AppKit's delegate forwarding is itself built on, and
independent of who owns the delegate. Registration happens on the
iced Subscription's first poll rather than in main() before app::run()
— registering earlier gets silently overwritten by winit's own
NSApplication startup, confirmed by testing against a real `open -a`
rather than assumed from Apple's docs.
This handles a file opened while the app is already running. A cold
launch (app not running yet) needs a different mechanism, in the
following commit.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
- Add bulge_arc_to_tangent helper to convert 2D BulgeArc into a 3D
TangentGeom::Arc preserving center, plane axes, radius, and CCW sweep angles.
- Replace full TangentGeom::Circle emission with TangentGeom::Arc across
LwPolyline and Polyline2D paths.
- Enables single-arc polylines to be extracted and rendered as analytical
GPU arcs with circle.wgsl.
- Add unit test verifying single bulge polyline extracts as analytical GPU
arc.
- Emit transformed analytical curves (circles, arcs, ellipses) in block
expansion as standalone wires rather than merging them into batched line
strips.
- Keep render_instance unset on analytical curves in block prototypes so
they route directly to CircleGpu / EllipseGpu instead of BlockWireGpu.
- Support TangentGeom::Circle in extract_circle_instance and wire partitioning.
- Drop analytical tangents on wires clipped by xclip so clipped geometry
falls back correctly to line segments.
- Add unit test verifying block circles and arcs extract as analytical GPU
instances.
With GPU analytical rendering handling circles, arcs, and ellipses,
tessellation geometry is now camera- and zoom-independent.
- Remove wpp from the tessellation memo guard hash to prevent clearing
all cached entities when zooming across quantization bands.
- Remove quantized_wpp from resident_wire_key and resident_wires_for
so all zoom levels reuse the cached resident set directly with zero
CPU re-tessellation.
- Fix clippy slice_from_raw_parts lint in dwg-thumbnailer without suppression.
- Update zoom test to assert Arc pointer equality across camera zooms.
- Add fast classify_wire to bypass circle/ellipse extraction for the 95%+ of wires that are straight/polylines.
- Implement single-pass partition_wires extracting regular wires, mesh edges, block wires, circles, and ellipses in one traversal.
- Upload circle and ellipse instances directly from pre-extracted buffers in PersistentWireArena and build_wire_buffers without redundant iteration.
Add the typed document facade and plugin IPC adapter. Prepare bulk edits
before mutation, preserve undo and dirty state, keep profile elevations,
validate numeric inputs and session bindings, and generate Python constructors
with typed results.
Reuse existing entity transforms and profile conversion. Compute mass
properties and closed-surface bounds in cadkernel; pin its main revision
6a5e6fc2822f6af6b2611cd605b44437b35158f0. Keep plugin API metadata at version 6.
Validation: 646 native application tests, 597 kernel tests, 12 document API
tests, 91 plugin API tests, 3 Python tests, default/IPC feature builds and
wasm32 check passed.
