Remove the forces_endpoint_snap mechanism merged in #293:
CadCommand::forces_endpoint_snap, Snapper::snap_forced_corners /
forced_corner_modes, the PlotWindowCommand override, the on_tick +
click-commit wiring, and the associated tests. PLOTWINDOW now uses the
normal snapper like every other command.
Rationale: forcing Endpoint snap on regardless of the global OSNAP master
overrides an explicit user setting and is surprising — a plot window is a
coarse print region that usually wants a margin, not a corner lock, and
the forced set only caught Endpoint (not center/mid/intersection) so it
was a partial, opinionated helper. Parking it pending a design discussion
with the PR author; can be reinstated behind a clearer UX (e.g. respecting
OSNAP, or an opt-in modifier) if justified.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Three defects found reviewing the just-merged PRs:
- PLOTWINDOW forced corner snap (#293) only ran in the on_tick preview
path, so the marker highlighted an endpoint but the click committed a
plain snap — with the global OSNAP master (or Endpoint mode) off the
corner landed at the raw cursor, defeating the feature. Apply the same
snap_forced_corners branch at the click-commit recompute.
- build_dxf_pattern (#292) wrote the pattern line's LOCAL step into the
world-frame HatchPatternLine.offset. The new prebaked reader
inverse-rotates offset assuming world frame, so app-created hatches
(HATCH command) collapsed their spacing by cos(angle) — ANSI31 at 45deg
rendered 2.245 instead of 3.175 on both viewport and PDF/plot export.
Rotate the local step into world here so it round-trips and the stored
offset is format-correct for other CAD apps.
- far_from_origin_pattern_hatch_still_fills placed its offset ALONG the
45deg lines (projects to k~0), so it never exercised the span-cap fix and
passed even with the old absolute-index clamp restored. Move the offset
perpendicular to the lines so |k| >> the cap. Add
app_created_hatch_roundtrips_catalog_spacing to guard the offset-frame
fix (verified: fails at 2.245 without it, passes at 3.175 with it).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
PLOTWINDOW / PW now forces Endpoint object-snap while picking its two
corners, independent of the global OSNAP toggle, so the plot area lands
exactly on frame corners. The snapper's master toggle and configured
modes are saved and restored around the pick, so the user's OSNAP
settings are unchanged afterward.
- CadCommand::forces_endpoint_snap() opt-in (default false; PlotWindowCommand true).
- Snapper::snap_forced_corners() forces Endpoint only, then restores state.
Intersection is deliberately excluded: it is O(n^2) over the hit-test wire
set and froze the UI on large drawings when a plot window is picked
zoomed-out. Frame corners are endpoints, so Endpoint alone suffices.
- the cursor-move handler routes the plot-window pick through the forced path.
Works in model and paper space (shared pick path). Tests: opt-in flag;
forced mode set is endpoint-only; snapper state is restored after the call.
- Reword the two new explanatory comments to describe the behaviour on its
own instead of citing another product.
- window_to_sheet: drop the unused window_min parameter (the caller already
derives its coordinate offset from the returned min-corner position) and fix
the doc comment to match what the function returns.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Ribbon:
- A ▾ selector at the right of the tab row picks the tool-panel density —
Auto (size to window), Full, Compact, or Collapsed. The choice is persisted.
It hides itself when the tool row is already tight, giving the cramped tab
row its space back.
Start page:
- The Recent Documents card is restyled to match the Supporters card
(rounded corners, 20px padding, matching title + colours).
- Its scrollbar no longer sits on top of the row ✕ remove buttons (a gutter
is reserved).
- A footer control sets how many recent files to keep: [-] an editable count
[+] with the max shown. Typing applies on Enter; an over-max entry snaps to
the max. The limit is persisted and enforced on load and on every open.
- The "Support on Patreon" heart is now the SVG icon instead of a font glyph.
Config:
- Add a shared `config::config_dir()` helper; the recent-files and status-bar
stores now go through it instead of each re-deriving the path. New minus.svg
icon for the stepper.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Pick a rectangular window in model space with the existing PLOTWINDOW command (now enabled in model space, previously paper-space only) and export it to a PDF at a chosen ISO paper size (A4-A0), orientation and scale (fit or ratio). The window is a hard clip boundary. Adds paper-size presets, a window-to-sheet transform, scale + clip support in the PDF exporter, and Page Setup controls (format/orientation/pick window).
When the window is too narrow for the full properties panel it now
collapses to a slim vertical "Properties" bar (its label drawn rotated 90°
on a canvas), freeing width for the viewport. Clicking the bar expands the
panel back out alongside the bar; clicking it again re-collapses
(props_expanded state + TogglePropertiesBar). Reuses the rotated-label bar
helper originally built for the Start page.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rebuild the Start page as three parts — Recent Files (left), Welcome
(center) and Supporters (right) — that sit side by side while they fit.
When the page is too narrow for all three it falls back to a tab bar
(Recent Files / Welcome / Supporters) showing one section at a time, with
Welcome open by default (new StartSection state + StartSectionSelect).
The Recent Documents list moves off the left properties slot and into the
page itself. The Welcome column's button rows now flex-wrap, and the two
intro-video cards sit side by side, wrap to a stacked column when the
width gets tight, then shrink to fit the remaining height so they never
spill over the status bar. Trimmed the headline to just "Open CAD Studio"
(dropped "Welcome to" + the subtitle) and the "Release Notes" button, and
tightened the page's side padding.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
All ribbon dropdowns (tool dropdowns, undo/redo history, and the layer /
colour / linetype / lineweight / style combos) and all status-bar popups
(scale, units, OSNAP, isolate, filter, customization menu, layout list)
now open directly at their widget instead of at a layout-estimated
position, and flip to the other side when the panel would cross a window
edge.
Each dropdown/pill widget is wrapped in a transparent PosReport that
records its screen bounds into a thread-local map on draw. The overlays
read those bounds:
- Ribbon: Ribbon::dd_anchor(id, panel_w, win_w) returns
(align_right, h_pad, top); position_ribbon_dropdown places the panel
below the widget, flipping right-aligned near the right edge.
- Status bar: popup builders take (pill_bounds, win_size) and call
popup::position_statusbar_popup / popup_anchor, opening just above the
pill and flipping left/right at the window edge.
The window size is now tracked (win_size, set on WindowResized). The old
layout estimators compute_dropdown_left / compute_layer_combo_left /
compute_prop_combo_left / compute_history_dropdown_left and
osnap_popup_right_offset are deleted.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Third stage of the adaptive tool area (shrink -> compact -> collapse).
When even the compact panels don't fit, DensitySwap picks a new
CollapsePanels widget that keeps a left prefix of panels inline and
collapses the rest to buttons; clicking a button opens the full panel as
an overlay flyout anchored below it (closes on outside press, mirroring
color_select's Floating).
A collapsed panel's button shows a live representative tool — the panel's
last-used tool (tracked per panel in Ribbon::note_panel_tool on every
tool click), defaulting to its first — rendered as a large icon. To
support this, render_small now also renders Large* items small and
render_large now renders plain Tool/Dropdown items large. Large dropdowns
render as icon + label + a bottom arrow strip via a shared
render_large_dropdown helper, used in both the full ribbon and collapsed
panels.
Ribbon dropdowns (tool dropdowns + undo/redo history) now anchor their
overlay directly below their widget at any size: a transparent PosReport
wrapper records each dropdown button's screen bounds into a thread-local
map on draw, and the overlays read it via Ribbon::dd_anchor instead of the
layout-estimating compute_*_left helpers.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Start tab, drawing tabs and the "+" button now live in a single
WrapFlow instead of a fixed-height Row, so they spill onto lower rows
when there are more tabs than the width can hold. Drops the fixed 30px
height and the trailing Fill spacer.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The snap popup used a hardcoded 4 px right offset, pinning it to the
window's right edge — but the Osnap button sits well to the left, with up
to ten pills after it (Space, Scale, Units, Transparency, Isolate, …).
Anchor it by the summed width of the pills that follow Osnap, honouring
the user's per-pill visibility. iced gives the view no real layout
metrics, so the pill widths are estimated (icon pills fixed, labelled
pills approximate); the popup now opens by the button instead of the
corner.
Closes#248
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two refinements to Parallel snap. The acquired reference now keeps a
point on the line and draws a ∥ marker there, so the user sees which line
the parallel is measured from. And dwelling on that same reference line
again removes it (toggle), matching how OTRACK tracking points clear;
dwelling on a different line switches the reference. Same-line detection
uses parallel direction plus perpendicular screen distance, so it holds
across zoom.
Refs #277
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Parallel snap did nothing — the type was in the osnap set, priority and
marker, but there was no logic behind it. Implement it: hovering a line
(or polyline segment) for a short dwell acquires its direction as a
reference; then while drawing from the last point, when the cursor runs
parallel to that reference the point locks onto the line through the last
point parallel to it, showing the ∥ marker and the alignment guide.
Curves (circle/arc/ellipse) are ignored — parallel to a curve is
undefined. Works with only the Parallel object snap on, independent of
OTRACK; the reference clears with the command's tracking state.
Closes#277
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A line whose FIRST point is a Tangent snap on a circle can't be fixed
until its direction is known, and a line tangent to TWO circles is their
common tangent — neither is resolvable at a single pick. A plain LINE
dropped the tangent object, so it drew a wrong line (TAN-TAN between two
circles).
Add an opt-in on_point_with_tangent hook (default ignores the tangent, so
every other command is byte-for-byte unchanged) and route the running
Tangent object through the point commit. LINE defers a first-point circle
tangent and resolves it on the next pick: against a second circle tangent
it picks the common tangent of the two circles (up to four — chosen by
the two cursor hits, so hovering selects inner/outer + side); against a
plain point it draws the tangent from that point to the circle.
last_point syncs to the resolved anchor. Common-tangent and point-tangent
math is f64 with perpendicularity unit tests.
Refs #274
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The batched hatch pass evaluates its fill procedurally per fragment — a
point-in-polygon test over the whole boundary plus the pattern test, with a
`discard` that disables early-Z. When the view sits inside a hatch its quad
covers the screen, so panning / zooming re-runs that full-screen shader every
frame (~40 ms/frame on a hatch-heavy plan) even though the rest of the scene
is cheap — the wire pass and CPU prepare are negligible by comparison.
Suppress the hatch pass while the view is actively panning / zooming /
orbiting, detected from `camera_generation` plus a short settle timer
(`Scene::navigating_lod`), and fold that state into the render signature so
the moment the view settles it renders hatches once and the scene-render
cache holds that full-quality frame. A brief `is_settling` subscription keeps
requesting frames just past the settle point so the hatched frame renders
even when no input event would otherwise fire. Mirrors AutoCAD's adaptive
degradation. The paper sheet keeps its fills.
Opening a drawing that xrefs several 3D-heavy DWGs (e.g. Clinic.dwg with
5 discipline files) took ~137s, effectively all of it inside the DWG
parser's AcDs SAB blob extraction.
Bump the acadrust pin to ceef045, which bounds the AcDs end-marker search
so a missing marker family no longer scans the whole buffer per record.
Total xref resolve for Clinic.dwg drops from ~97s to ~4s.
Also make the post-xref mesh pass incremental: the host solids were
already tessellated by the background loader and the merge assigns fresh
handles to every imported entity, so `populate_missing_meshes_from_document`
keeps the cached host meshes and tessellates only the merged xref solids
instead of clearing and rebuilding the whole document.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Extension snap extended every segment's line in the whole drawing, so in
a larger project an extension foot was live almost everywhere and the
cursor snapped to it constantly.
Extension now behaves like a temporary tracking point: an endpoint must
first be acquired by dwelling on it, and only then does that segment's
line extend. Acquisition — and the tracking-point marker — is active
whenever OTRACK is on OR the Extension snap is on, so Extension works
independently of OTRACK's on/off state (and is not tied to POLAR). Both
the per-segment extension and the extended-intersection candidates are
gated on an acquired endpoint, and the whole scan is skipped when nothing
is acquired (the common case), keeping large drawings responsive.
Closes#262
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Autocomplete suggestions came only from all_registered_command_names() —
the compile-time inventory registry returning &'static str — so
runtime-loaded plugin commands could never appear. Typing a plugin's
command prefix (e.g. `LS_`) showed nothing even with the plugin loaded
and its ribbon tab active; dispatch worked, only discovery was blind.
Collect each enabled plugin's ribbon ToolDef command ids plus its
manifest command_prefixes into a dynamic candidate pool
(OwnedRibbonGroup::command_ids → PluginManager::command_names →
plugin_command_names), refreshed in rebuild_ribbon_modules on startup
load, settings reload, and every enable/disable toggle. ranked_matches
now merges this pool with the static registry and returns owned strings.
A plugin.toml `commands = [...]` list for sub-verbs with no ribbon button
(e.g. LS_AUTOLABEL) stays a follow-up — it's a plugin-API surface change.
Closes#272
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Layer Manager table and the ribbon's quick layer dropdown both
showed layers in document (insertion) order. Default the panel sort to
Name so both list layers alphabetically; a header click still re-sorts
by any other column. `apply_sort` reorders the panel's layer vector in
place, which the ribbon dropdown reads, so one default covers both.
With alphabetical ordering a freshly created layer can land anywhere in
a long list, so give the table scrollable an id and scroll its row into
view after creation, keeping the rename prompt visible.
Closes#270, closes#271
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A rectangle's opposite corner is entered through Width/Height dynamic
fields, whose sign is taken from the cursor quadrant on commit. Typing
"50,50" is a cartesian coordinate pair, not two cursor-signed
dimensions, but the comma advance kept the Width/Height roles so the
committed corner mirrored into whatever quadrant the cursor sat in.
Key off `dyn_user_reshaped` (set only by `,`, never by Tab) to treat a
comma-separated entry as a literal cartesian coordinate for every field,
in both the point resolver and the live dyn-box display. Tab-separated
entry still reads as signed Width/Height dimensions.
Closes#269
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The paper layout sheet pass reused the full model mesh set, so every
top-level 3D solid piled onto the paper origin — the sheet camera works
in paper coordinates, not model space. Guard `meshes` on
`inst.paper_sheet` the same way wires/hatches/images already are: the
sheet shows only paper-native content; the model's solids render inside
the floating content viewports (model camera + per-viewport scissor).
Also name 3DSOLID/REGION/BODY/SURFACE/MESH/SOLID/MULTILEADER in dxf_name
(they fell through to "ENTITY"), and add a SELHANDLES diagnostic that
reports the active space plus a per-type / per-block selection breakdown.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
#218: with Ortho on and a base point the axis is now a hard lock — a lone
tracking ray can't pull the cursor off it. Only a tracking ray crossing
the ortho axis locks (the corner-finding case); otherwise the ortho
constraint applies as the fallback, so Ortho reliably locks when OTRACK
is also on.
#219: an acquired corner now contributes an alignment ray along its own
edge direction(s) (captured once at acquisition), so OTRACK follows a
segment's extension, not just the ortho/polar axes. Acquisition is also
captured on leave — a perfectly still cursor emits no move events, so
"pause on a corner, then drag" now reliably acquires it. The acquired
marker projects through the active pane's camera + rect (canvas offset
included) instead of vanishing, and the active alignment path is drawn
as a full-length dashed guide through the corner.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Extension osnap now offers a ray off every polyline vertex, not just the
first and last, and snaps to where two segments' extension lines would
cross. That crossing is emitted as an Intersection so it outranks the
per-segment extension feet on their own lines. When it wins, both
contributing extensions are re-detected — off-ray distance measured in
screen space so the tolerance holds at UTM coordinates — and the overlay
draws a dashed guide from each endpoint through the crossing, so both
extension paths remain visible instead of vanishing when caught.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Inserting a block piled every attribute at the origin: each AttributeEntity
was built from just tag + value with default geometry. Carry the full
AttributeDefinition through the attreq flow and build attributes with
AttributeEntity::from_definition, then apply the block's insertion transform
so each lands in WCS at its proper position / alignment / rotation.
Attributes are stored in world space, so moving the block must move them
too. The MOVE command already did (acadrust translate_insert); apply_grip
(grip-drag) and the Position X/Y/Z property edit now translate the
attributes by the same world delta so they no longer stay behind.
Rotate/scale/mirror of a block still don't carry the attributes — acadrust's
transform_insert has no attribute pass — tracked separately.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Layer Manager already applied colour/linetype/lineweight in bulk;
extend that to the rest:
- Visibility, lock and freeze toggles now act on every selected layer, not
just the clicked row. The clicked row's new state becomes the target for
all. Transparency edits apply to the whole selection too.
- Clicking a linetype/lineweight combo on a row that is already part of a
multi-selection no longer collapses the selection (the whole row is one
mouse_area whose plain-click select would otherwise reset it), so those
edits stay bulk.
- Ctrl/Cmd+A selects every layer row while the Layer Manager is open, and
all drawing objects otherwise.
Two now-unused Scene layer-toggle helpers are removed (the handlers set the
flags directly and bump once).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two follow-ups to ADDSELECTED:
- It no longer permanently changes the current layer/colour/linetype/
lineweight. The template's properties are captured as the drawing
defaults only while the launched draw command runs; a snapshot taken in
cmd_add_selected is restored the moment that command ends (central hook
in apply_cmd_result) or is interrupted by another command.
- Dimensions are supported: add_selected_verb maps each DimensionType to
its DIM* command, and the template's dimension style is adopted as the
current DIMSTYLE (restored afterwards). commit_entity_handle now stamps
every new dimension with the current DIMSTYLE — the DIM commands left the
default "Standard" on the entity, so a normal dimension also picks up
the active style now.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
OCS models 3-D solids with truck, but extrude/boolean results carried no ACIS
body, so other CAD apps dropped them on open. Add an exact planar exporter and
run it at save time.
- scene::convert::acis_export::planar_solid_to_sat walks a truck Solid whose
faces are all planes bounded by straight edges into a vertex/face-ring mesh
and builds an exact ACIS body via acadrust's build_planar_body. Curved
faces/edges return None (left for the NURBS path). A signed-volume check
flips the winding if the shell comes out inside-out.
- OpenCADStudio::sync_truck_solids_to_acis fills in ACIS geometry for every
cached truck solid that still has none, just before a Save / Save-As, so the
written DWG/DXF carries real modeler geometry.
- Bump acadrust to 9142a50 (build_planar_body + classic-ACIS AcDs roundtrip fix).
Booleans (already cached as truck solids) now export exact geometry. Extruded
polygons will too once the EXTRUDE command caches its truck solid (a separate
change kept out of this commit because command_driver.rs holds unrelated
in-progress edits).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Root cause: the glyph tessellator advanced the pen by advance*width_factor
while the transform already scales the pen position by the width factor, so
a backward (negative width factor) run kept its word order and grew on the
same side of the anchor instead of mirroring across it. Advance in unscaled
glyph units to match text_local_bounds; the transform applies the factor once.
On top of that:
- The renderer honours the entity's own text-generation flags (DXF 71: bit 2
backward / bit 4 upside-down) XOR the text style's flags, and signs the
horizontal anchor by the width factor so Center/Right backward text mirrors
about its anchor.
- MIRRTEXT on: a MIRROR toggles both group-71 bits so the reflected rotation
renders a true glyph mirror (backward-upright for a vertical axis, flipped
for a horizontal one).
- MIRRTEXT off: the text flips left<->right and lands mirror-symmetric to the
source (right-reading) instead of hugging the axis.
- The MIRROR preview re-derives text ghosts to match the commit; mirrored()
now reflects the double-single residual too.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Typing a bare system-variable name (MIRRTEXT, FILLMODE, LTSCALE, …) now
echoes the current value and prompts "Enter new value for <NAME> <cur>:",
capturing the next command-line entry as the new value — Enter keeps the
current one, Escape cancels. The single-line "MIRRTEXT 1" form still works.
Mirrors the awaiting_vports pattern: a pending_setvar field on the app,
consumed at the top of on_command_submit.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
On German/European layouts the numpad decimal key emits a comma, which the
coordinate parser rejects. Match the physical NumpadDecimal / NumpadComma
key and emit '.' regardless of the OS layout. (#201)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Remove the OCS-logo button and the dropdown menu it opened; the top strip
now shows direct New / Open / Save / Save As / Print buttons ahead of the
undo/redo controls. Drop the HELP and OPTIONS commands (HELP dumped text to
the command line, OPTIONS aliased the drafting-settings popup).
The app-menu overlay is gone, so its rendering code, MENU_ITEMS, four dead
messages, and the LOGO_RED / GEAR / HELP assets are removed. The recents
list it held is the only survivor — moved into OpenCADStudio.recent_files
via a new app/recent.rs, backing the Start page's Recent Documents panel.
Quick-access icons are redrawn in a cleaner style (file-plus, folder-open,
device-floppy, file-export, printer) and tinted light so they read on the
dark strip; FOLDER / DOC keep their old glyphs for the file browser.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Text branch only set horizontal_alignment, so TL/BL/MC etc. never
moved the text box vertically. Map the T*/M*/B* codes to Top/Middle/Bottom
and re-sync the alignment point. (#246)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the click-to-instantly-copy read-only cell with a non-editable but
selectable text field: the user selects the value (drag / double-click /
Ctrl+A) and copies with Ctrl+C, the normal expected gesture. The field
carries the full un-truncated value, styled flat (no input box or focus
ring) so it still reads as read-only but with a visible selection colour.
Keystrokes route to Noop, so it can be selected/copied but never edited.
Removes the PropCopyValue message + handler and the mouse_area copy hook.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A read-only value cell is now click-to-copy: clicking writes the full,
un-elided value to the system clipboard (copy cursor on hover). One
change in render_ro_row, so it covers every read-only row for every
entity. Adds Message::PropCopyValue routed through iced::clipboard::write.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A block reference's Attributes group was built in two places — the Insert
entity's own properties() builder and an older panel injection left from
the issue-192 attribute-editing work — so it appeared twice in the panel.
Both produced identical AttrText rows (get_value() just returns &value).
Drop the panel injection; the entity builder is the single source and
also covers multi-select. Attribute edits still route by tag, unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Bump acadrust to a46cb8b (spline knot parameterization + mtext line-space
style now stored) and populate rows the builders left blank:
Entity-local: spline Knot Parameterization + closed-spline Area (shoelace),
mtext Line space style, hatch Spacing (pattern-line offset), leader Text
offset (annotation offset), region Area + Perimeter (wire-loop approx).
Doc-dependent (resolved in app/properties.rs where the document is
reachable): insert Block Unit + Unit factor (block record units vs
INSUNITS), underlay Name + Path (definition object), leader Text style /
vertical placement / overall scale and tolerance Text style (dimension
style), multileader Max points + segment angles (mleader style).
Rows needing an annotation-scale / sheet-set subsystem or an internal
PDF/DWF layer parser are intentionally left blank.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Pull in this session's acadrust work — the HELIX / ACAD_TABLE read+write,
underlay reader/writer/definition, spline tolerances & tangents, etc. The new
EntityType::Helix variant breaks three exhaustive matches; add its arm to
entity_type_name, the UI-name / DXF-name maps and entity_type_key.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Fill the two placeholder rows added earlier. Read the General group's
Hyperlink from the entity's XDATA (the "PE_URL" application record's first
string). When an entity carries an explicit material (material_flags == 3),
resolve its material_handle to the Material object's name and show it in the
3D Visualization group instead of "Custom".
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Resolve a dimension's DimStyle from the document and inject its full spec
groups — Lines & Arrows, Text, Fit, Primary Units, Alternate Units,
Tolerances — mirroring the ~80 dimension variables (dimasz, dimclrd, dimtxt,
dimdec, dimtol, dimzin bit flags, …) as read-only rows. The panel already had
doc access for the dim-style picker; extend it to append style_sections(style)
after the dimension's own Misc/Geometry groups.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
An entity added via a plugin's AddEntity with a common.layer name that no
LAYER command ever created kept its layer in-session, but the DWG writer
resolves an unknown layer name to a NULL handle, so on reopen the entity
collapsed to layer 0.
Add a shared Scene::ensure_layer(name) that registers a missing layer with a
real handle (allocate_handle, per #67) and call it from add_entity and
update_entity. This covers the plugin AddEntity/UpdateEntity IPC and every
internal add path without a new IPC request. Existing/empty/"0" layers are
no-ops, so normal draw commands are unaffected.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
#249 — plugin XDATA written via write_record survived only in memory: the
acadrust DWG writer dropped ExtendedData::records on save. Bump acadrust to
e88a9a6 (records now encode to EED and decode back on read) and fix the host
side that fed it:
- ensure_app_id allocates a real APPID handle; a null handle serializes as
0 and the EED reference can't resolve, so the XDATA vanished on reopen.
- write_record / remove_record drop stale raw_dwg_eed for the target app so
an edit made after a save/reopen wins over the pre-edit bytes.
#250 — out-of-process plugins got a throwaway document_mut() snapshot, so
edits to existing entities were silently discarded and deletion wasn't
expressible at all. Add the missing mutation surface:
- UpdateEntity / RemoveEntity IPC requests + HostApi::update_entity /
remove_entity (default in-process impls, RPC overrides on the client that
invalidate the stale document cache).
- Scene::update_entity replaces the entity in place, preserving its handle
and owning block, and reseeds only its derived caches; remove reuses the
cache-coherent erase_entities (which also honours layer locks).
- document_mut() is documented as a local-only snapshot out-of-process.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
XREFs are merged into the document on the UI thread AFTER the background
worker already built the mesh caches, so those caches contained none of
the xref'd geometry. The wire pass rebuilds from the document each frame
(bump_geometry covers it), but 3D-solid meshes are only produced by
populate_meshes_from_document, which never re-ran after the merge — so
xref'd solids (walls, floors, roofs) were loaded but never tessellated
and never drawn. Re-run it once a xref actually resolves.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The browser can't call the Patreon API directly (CORS, and the token
would be exposed in the bundle), so the web build fetches a
pre-generated supporters.json served on the same origin. The Pages
workflow generates it server-side with the token (CI secret) after the
trunk build. Native keeps its live API fetch.
serde_json moves to the shared dependencies so the wasm build can parse
the list.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Add a right-hand rail on the Start page listing active paying patrons
(name + pledge amount, highest first) with a "Support on Patreon" button.
The list is fetched once at boot from the Patreon API in the background;
free followers, $0 tiers, declined and former patrons are excluded.
The creator access token is read at build time from OCS_PATREON_TOKEN
(option_env!), so it never lives in source or git — the release workflow
passes it from a repo secret, and build.rs re-bakes when it changes.
Without a token the rail just shows the support button.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Show two clickable video thumbnails side by side on the Start page; a
click opens the video in the system browser. Refactor the card into a
shared builder and bundle the second thumbnail.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rework 3D view navigation:
- Turntable / lock-horizon orbit: horizontal drag yaws about world +Z,
vertical drag pitches about the horizontal camera-right axis, so the
view never banks. Pitch is pole-clamped but the straight-down default
view can still be tilted out of.
- Orbit centre: the selection's centre when something is selected,
otherwise the point under the cursor — no longer only the file centre.
The camera revolves rigidly about the pivot, so it stays put on screen
and the view doesn't jump.
- Mouse scheme: Zoom = wheel, Pan = MMB, Rotate = Shift+MMB. Right-drag
no longer orbits (right-click stays context menu / Enter). Floating
viewports orbit with Shift+MMB too.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The window/crossing selection anchor was stored only in screen pixels, so
zooming or panning mid-drag left it frozen while the drawing moved under
it — the rectangle then covered the wrong world area and selected too much
or too little.
Store the anchor's world point and re-project it to the screen anchor
whenever the model-space view zooms (on_viewport_scroll) or pans
(on_viewport_move), so the rectangle tracks the drawing. The moving corner
already follows the cursor. (MSPACE floating-viewport box-select would
need the viewport camera and is left as-is.)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Properties panel color picker is a custom bool-driven dropdown, while
Layer/Linetype/Lineweight are combo_boxes. Combo_boxes close each other on
blur, but nothing closed the color picker — so opening the Layer dropdown
while the color picker was open left both showing and overlapping.
Give every panel combo_box an on_open handler that collapses the color
picker, so at most one panel dropdown is open at a time.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
