- True Color opens in RGB; the gradient field, hex and nearest index sit
at the bottom so CMYK's fourth slider doesn't move them; slider rows
closer together.
- Document tab: grid or list view (list drawn like the colour-book bars),
and Name A–Z / Z–A sorting (translated in all locales). Swatches of
colour-book colours show the colour's name.
- A colour-book colour picked as the current colour (nothing selected)
keeps its BOOK$NAME on the objects drawn with it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
world = insert_point + Rot * Scale * (P - base_point). Attribute placement, EXPLODE, XCLIP storage, REFEDIT's working copy, the UCS reframe of attributes and the dynamic-block visibility grip ignored the base point and were offset by Rot*Scale*base. They now share insert_transform_with_base. Creation stores a ZERO base and redefine resets it; a no-op redefine moves nothing; the Block Definition dialog prefills the base from the definition. XCLIP filters stored by older builds keep their old displacement.
bake_dimension_blocks copied the dimension's whole EntityCommon, including its extension dictionary handle, into every baked child, so many entities claimed one dictionary and file validation reported an error per entity. Baked children now get no extension dictionary. The same defect is fixed in define_transformed_block and the cross-document paste clone. Each has a test.
#1707 took any snap name typed at a point prompt as an override, so a
prompt offering Center, Tangent, Parallel or None (ARC, ELLIPSE, CIRCLE
TTR, ...) could no longer be answered with that option's name. An option
the prompt offers now wins. The point-step test it copied from MTP is one
helper shared by MTP and the override on both input paths.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
#1681 places a dimension's picture block by its insertion point, rotation
and scale. Edits (move/rotate/scale/mirror, copy, paste) transform the
picture's sub-entities in world space, and the codec's dimension transform
moves the insertion point too, so a rotated or copied dimension would get
the placement applied twice. Fold the placement into the subs before the
edit and leave the dimension at the identity placement afterwards.
The picture insert no longer takes the dimension's extrusion: OCS bakes
picture sub-entities in world coordinates, so only the stored insertion
point goes through the OCS. A zero insertion-scale component counts as 1.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Tests previously ran on Ubuntu only, so Windows- and macOS-specific breakage went unseen. Add a 3-OS test matrix and a separate lint job for rustfmt and clippy. Lint is continue-on-error because the tree is not yet fmt-clean or clippy-clean.
Also add BEDIT characterization tests that pin current session, undo and refusal behavior ahead of the editor refactor. Locked tests guard behavior that must survive; documenting tests record questionable behavior expected to change.
Allow users to temporarily override object snaps during active point prompts by typing at least the first 3 letters of any snap mode (e.g. MID, END, CEN, PER, NON). The override activates for the next point pick only and automatically restores running snaps once consumed or cancelled.
SURFACEASSOCIATIVITY now keeps EXTRUDE, REVOLVE and LOFT surfaces linked to
their sources: the profile (and axis object) or cross sections are kept, the
surface is made again when they change, and the drawing's associative
network carries an action with the extruded, revolved or lofted surface
action body, its path parameters and value parameters as the reference
writes them. Swept, extruded, revolved and lofted surfaces can read
splines (NURBS edge curve, fit-point splines through their fit points)
and ellipses (elliptical edge curve). Associative surfaces of a file
opened here follow their sources too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- refresh_associative_sweeps runs on every edit and scanned the xdata of
every entity; it now returns at once when no associative swept surface
exists (its application is not registered) and looks at surfaces only.
- An arc's end angle was raised by TAU in a loop, which never ends on a
huge angle from a damaged file; the sweep is taken with rem_euclid.
- The sweep DELOBJ test expected surface sweeps to delete their sources,
which #1663 changed on purpose: an associative surface keeps them.
- codec c9ffcac (opencadcodec #103) adds an explicit viewport-off bit: the
viewport on state is read with is_on() and set with turn_on()/turn_off()
everywhere, so a viewport the file marks off shows off and can be turned
back on from Properties.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
Sweep history records in the reference layout.
Pins resolved to upstream: codec bff95f5 (#93, #94, #95, #96, #97 and
review fixes), kernel 6146d31 (#75 and review fixes), graph 9635ba7.
- A blank script line outside a command repeats the last command through
dispatch_command, as the command line's empty Enter does.
- ZOOMFACTOR bound docs describe the SETVAR range the PR widened, and the
test keeps checking the value the Options field reaches.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
New sweep records store the source and placed profile frames, the
default mitred joint, groups 292-294 and a 3D polyline path as a wire
body, so the reference re-evaluates them. Builds against the sweep
history codec and kernel revisions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings codec PRs #84 (cross-version visual styles, table styles,
subentity managers), #88 (viewport clipping flag, DXF boundary handle),
#89 (DXF viewport snap/twist in degrees) and #92 (field format codes,
event updates).
With #88 a viewport keeps a stored boundary whether or not clipping is
on, so a linked boundary alone no longer means "clipped": rendering,
paper picking, VPCLIP and the Clipped property check the clipping flag
too, and VPCLIP / MVIEW Object and Polygon set it. Before, OCS never set
the flag, so its clipped viewports opened rectangular elsewhere.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Invalid Area "Undo" reverts the step that lost the boundary (redo after
an undo, undo otherwise), checks the boundary is back and otherwise puts
the step back and continues without the area; no auto-undo loop.
- COUNTCLOSE / area replacement remove the count polyline outside the
history instead of as an undo step of their own.
- UPDATEFIELD re-evaluates the field texts of a table's *T block and
reports the number actually updated.
- Zoom to a counted object goes through the f64 handle_zoom_to_window.
- Palette: SVG icons instead of glyph text, list cache keyed by tab id,
cached result borrowed instead of cloned, "Count" as the source text.
- Command-line messages go through t!/tf! with entries in all locales.
- Cleanups: \n escapes, area comment, unused parameter, comment order.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A drawing's sheet set fields are refreshed when it opens with sets loaded.
- VIEW WINDOW <name> <x1,y1> <x2,y2> saves the plan view of a window.
- opencadcodec: block-attribute fields use their block reference's layout.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Splitting a boundary object erased it and added the pieces, so the hatch
lost that source and rebuilt from what was left, often the whole circle.
The pieces now take over the old object's association before it is
erased.
Fixes#1572
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts with #1573: the locale files and the catalog take both PRs'
entries (one "Insertion Point" mapping kept); the Home and Insert Block
panels take #1574's layout with #1573's Insert Block gallery.
#1584 stripped the prefixes before dispatch, which turned the ribbon's own
internal names (_PCCROPPOLY, _XREFEDIT, _PDFULSNAP, ...) into unknown
commands. A name is now tried as written and retried without its prefixes
only when no family handles it; the Start-tab gate judges the bare name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A Field dialog with the fields the application evaluates and the
reference format choices, FIELD placing a field as multi-line text, the
attribute definition dialogs' field buttons, field attachment on commit,
system variable / file size / regional date providers for field
evaluation, and the codec patch with the field authoring API.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Codec: PRs #71-#74 merged (MPOLYGON layout, multiline ATTDEF/ATTRIB DXF,
DXF MATERIAL/ACSH matrix, restorable SAT/SAB + history roots) and issues
#55 #64-#69 fixed. EntityType now boxes Surface, Extended, Table,
MultiLeader and Helix (2344 B -> 848 B per entity): construction sites
wrap in Box, the entity traits forward through Box, and the python
plugin generator converts with into(). Kernel: PR #70 (cuboid ring
winding).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Align and Fit attributes run their text between the two baseline points,
an ATTDEF height becomes the next text height, and Multiple lines is not
carried to the next definition (measured).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude