Extend SDF text to the remaining text kinds and make the Text arm decide SDF
per group instead of per entity type.
- Text arm: a stroke group renders as SDF glyph quads when it carries a
GlyphRun (strokes suppressed); a run-less group keeps its strokes. TEXT /
MTEXT / dim / block / mleader are unchanged (all run-groups). A composite
Text object can now mix geometry + text: its run-less groups stay strokes and
its run-groups become SDF. The glyph-bounds AABB is hoisted so both the
bins-empty and bins-non-empty paths stamp it on the text wire.
- Tolerance: refactored to emit the feature-control frame (border, separators,
dividers) as run-less stroke groups and each cell's text as a run-group, so
the frame stays crisp geometry while the values/symbols render as SDF text.
- Complex linetypes: embedded LtSeg::Text renders as SDF glyph quads on an
extra text wire (glyph-bounds AABB) instead of stroke polylines.
- click_hits_all: include SDF text boxes so selection cycling steps through
text too, ranked after real geometry.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two related steps for the text pipeline:
- TEXT parsing now goes through acadrust's parse_plain_text (like MTEXT
uses parse_mtext). text::acad_text_encode parses the value's %% codes —
including %%u/%%o underline/overline and %%nnn — and re-encodes to the
stroke tessellator's \L/\O + resolved-Unicode grammar, so OCS no longer
tokenizes TEXT %% codes itself. (ATTRIB/TOLERANCE/DIMENSION still use the
local tokenizer for now.) Bumps the acadrust pin to the commit that
completes the TEXT/MTEXT control-code set.
- SDF text (OCS_TEXT_SDF) now covers MTEXT and every text-producing
entity, not just top-level TEXT. TextStroke carries a GlyphRun (layout
params); the collector walks convert()'s TruckObject::Text runs and
applies annotation scale exactly as tessellate does for strokes.
layout_glyph_quads shares lff::tokenize_run so %% specials resolve and
\L/\O decorations are skipped (decoration LINES in SDF are still TODO).
Verified: stroke rendering unchanged with the flag off; SDF glyphs render
correctly for TEXT and MTEXT with OCS_TEXT_SDF=1. 154 lib tests green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rewrite each entity's property builder to the per-entity group/row spec:
the correct sections (Geometry, Misc, Text, Pattern, Lines & Arrows, Leaders,
Block, …) with the spec's rows and real computed values — Diameter,
Circumference, Area, Delta X/Y/Z, Angle, Total angle, Arc length, Radius ratio,
etc. — plus apply routing for the editable rows.
Covers ~26 entities (Line, Circle, Arc, Point, Ellipse, Spline, polylines,
Ray/XLine, Insert, Text, MText, Hatch, Leader, MultiLeader, Tolerance, Solid,
Solid3D/Region/Body, meshes, MLine, Raster/Wipeout, Underlay, Table, Viewport,
Attribute, OLE). The 3D Visualization/Material group and the full Dimension
spec are deferred (they need document access for material/dimstyle name
resolution). Rows whose data is not in the pinned acadrust revision are shown
as empty placeholders, to be filled when the dependency is bumped.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Groundwork for making the Properties panel conform to the per-entity group/row
spec (PROPERTIES.md). The panel already renders a Vec of sections, but each
entity could only express a single geometry section.
Change PropertyEditable::geometry_properties (and the EntityTypeOps enum
dispatch) to return Vec<PropSection>, update the two impl macros, and flatten
in properties_sectioned so the panel shows [General] + the entity's groups.
Every entity builder is wrapped to return its existing section as a one-element
Vec — pure mechanical change, no rows or titles altered, panel output identical.
Enables Phase 2: rewriting each entity's groups/rows to match the spec.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Text elements previously rendered as hollow wireframe outlines and sometimes
fell back to the wrong system font due to case-sensitive exact matching. Also,
the viewport background grid drew on top of solid entities.
Case-insensitive and partial-name fallback matching (e.g., mapping "arialn"
to "Arial Narrow") is now added to `sysfont::canonical_family_name`, ensuring
text resolves to the correct installed system font.
TrueType font contours are now triangulated into solid fills (`fill_tris`)
using `lyon_tessellation` in `ttf_glyph.rs`. To prevent the GPU from misclassifying
this 2D text as a 3D mesh (which broke flat shading), text tessellation splits
the output into separate outline and fill `WireModel`s.
The background grid is extracted from `SelectionCanvas` into `GridCanvas` and
moved beneath the 3D viewport to ensure proper layering. Finally, `DepthBiasState`
is enabled on all face/fill pipelines to apply a polygon offset, perfectly
resolving Z-fighting between coplanar wireframe lines and solid faces.
TruckEntity.snap_pts is now DVec3 and every entity producer builds snap
candidates straight from the acadrust f64 coordinates instead of casting
to f32 first (text, mtext, arc, circle, ellipse, point, shape, solid,
mline, mtext, attribute, tolerance, table, underlay, ole2frame, mesh,
multileader, dimension, block-cache). offset_snap_pts stays f64
throughout. Still offset-relative (inert) — but snap precision is no
longer capped at ~0.5 m by an early f32 cast, which fixes a latent
UTM-scale snap error and sets up the absolute-coordinate switch.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Grip markers drew visibly offset from the entity on large-coordinate
(UTM-scale) drawings: every Grippable impl cast the f64 entity coordinates
to f32 BEFORE the world-offset subtraction, and at 1e7 magnitude an f32
holds ~0.9 drawing units of rounding error. The wires subtract the offset
in f64 first (precision-preserving), so the grips landed up to ~1 unit
away from the geometry they belong to.
GripDef.world is now DVec3: producers fill it straight from the f64
entity data, refresh_selected_grips subtracts the world offset in f64,
and only the small offset-local result is cast to f32 for screen-space
projection (grips_to_screen / find_hit_grip) and drag state.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the small QCAD CXF stroke-font set with the full LibreCAD LFF font
library (46 fonts) and a new LFF parser/engine in src/scene/lff.rs. The
parser reads the `[hex] char` glyph blocks, tessellates `,A<bulge>` arcs, and
resolves `C<hex>` glyph references. Per LibreCAD's RS_Polyline convention a
vertex's bulge curves the segment ending at that vertex — getting this wrong
turned round letters like O into sideways capsules.
Font name resolution mirrors LibreCAD: match by file stem, map common
AutoCAD/DXF SHX names (txt, isocp, complex, italic, gothic*, gost, …) to the
nearest LFF family, and fall back to `standard`. A missing glyph in the chosen
family falls back to the broad `unicode` font so accented/Cyrillic/Greek text
still renders. Cap height stays 9 units, so the text scale is unchanged.
All text consumers move from cxf:: to lff::; complex linetypes still render
embedded text but no longer draw embedded shapes (LibreCAD ships no shape
file). The CXF module and every *.cxf asset are removed, and the MText / text
style font pickers list the LFF families.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- MultiLeader: stop double-scaling when ctx.text_height (WCS-baked) is set;
use it as-is and only multiply by scale_factor + anno on the fallback path.
ctx.text_width gets the same treatment.
- Text / Attribute: width_factor and oblique_angle are entity-authoritative.
The previous entity*style multiplication / addition mis-rendered any text
whose TXSTYLE had a non-default width_factor or oblique_angle (RR 0.6,
STYLE2 15°, Romans/ARIEL/A32 0.65-0.8 in the sample file).
- MText: honour TXSTYLE is_backward (negative width_factor mirror) and
is_upside_down (180° rotation). measure_mtext_chars uses positive
magnitude so anchor math stays correct under backward text.
- Tolerance: use tol.dimension_gap when set instead of the hard-coded
0.35 * height heuristic.
- Table: cell text height / font / alignment resolve through
CellContent -> CellStyle -> TableStyle.{title|header|data}_row_style
-> compiled-in defaults. Row classification respects the suppressed
flags. Cell + content rotation applied.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
- fix: polyline arc center sign was inverted (- → +) causing arcs to render on the
wrong side in LwPolyline and Polyline2D
- fix: store glyph strokes in local space with f64 origin so world_offset subtraction
uses f64 precision; prevents blocky text at large UTM coordinates
- fix: Face3D fill darkened to 45% so edge wires are visually distinct from fill
- fix: wire batch vertex buffer chunked to 256 MB GPU limit (was panic on large files)
- fix: gpu_face3d_edges changed from Option<WireGpu> to Vec<WireGpu> to support chunks
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Replace raw text dump with proper boxed feature-control frame:
- parse_gdt_rows(): splits %%v cells and ^J row separators
- substitute_gdt_codes(): strips {\Fgdt;X} patterns, maps symbol chars
to 3-letter ASCII labels (POS, PRP, PAR, SYM, CIR, CYL, …)
- tessellate_tolerance(): outer rectangle, row separators, column
dividers, and CXF-tessellated cell text — all as Vec<Vec<[f32;2]>>
(TruckObject::Text polyline path)
- Column widths computed per cell content; text centred in each cell
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- mline.rs: MLine renders center spine + two parallel offset lines at
±scale/2 using the vertex miter directions; vertex grips; scale,
closed and style-name properties
- tolerance.rs: Tolerance renders the GDT text string via font
tessellation at insertion_point with rotation from direction vector;
insertion grip and position properties
- properties.rs: Dimension entity's style_name EditText is upgraded to
a Choice dropdown when document.dim_styles is non-empty, enabling
point-and-click DimStyle assignment without a separate panel
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
