The kernel fills hatch rings whose holes touch (a column against a beam)
by the even-odd rule instead of dropping the whole hatch. A pick-point
hatch with 222 such loops was saved but never drawn. (#1813)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The dimension style, multileader style and Properties pickers listed
every block of the drawing as an arrowhead, and nothing else. They now
list the 19 standard arrowheads (Closed filled, Open, Dot, Architectural
tick, Oblique, Right angle, Datum triangle, …), followed by any user
arrow block the dimension or style already uses. Picking one creates
its block (`_Open`, `_ArchTick`, …) with the geometry the reference
program writes, so other programs draw the same arrow; ODA reads the
saved file cleanly.
`_Small` now draws as the reference's "Dot small blank", a hollow circle
half the arrow size, instead of a small filled triangle.
Also drops a duplicated "DGN Import" catalog entry left by #1810/#1812.
(#1820, #1821)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Refuse LAYOUT, VPORTS, MVIEW, WBLOCK, PURGE, RENAME, REFEDIT,
REFEDIT_BEGIN and PLOT from the command line while a block editor
session is open, matching the reference product's
"<CMD> command not allowed in block editor" behaviour (spec section 8,
based on the V7 hands-on check). XREF, NEW, OPEN and SAVEAS stay
allowed. The service-level RENAME guard stays as defense in depth.
The name field shared the 160 px sidebar row with Save and the close
button, so it was squeezed until no text showed. It now takes the full
width with the buttons below it, and the close button is the SVG icon
instead of a "×" glyph. (#1817)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- `SelectObjectsCommand::with_settings` exists once: #1811 and #1814
each added one; PDFSHXTEXT now passes its settings step as the
callback #1811's takes.
- The `pdf-shx` locale group in every language (English until
translated), so the catalog test passes.
- MCP tool schema digest for the `pdf_shx_settings` action.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
iced_test renders headless through wgpu by default. Several test threads
opening GPU devices at once crashed the driver: about every other
parallel `cargo test --lib` run died with SIGSEGV, always with the
color picker, ribbon, overlay and dock UI tests running together. With
ICED_TEST_BACKEND=tiny-skia the suite passes run after run.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A solid's edges and silhouettes were drawn in its face colour, and the
edge shader read that from the material instead of the edge vertices.
Colour 7 is white, so in Wireframe 2D a solid vanished white-on-white in
a layout viewport (and on a light model background), while wires and
block solids already turned black there. Solids now keep a separate
edge colour, colour 7 turned against the background they are drawn on,
and the edge shader uses the edge vertices' colour again, which also
brings back visual-style edge colours. Shaded faces keep their colour
so they still read as lit. (#1446)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Saving `starttekening.dwg` unchanged lost 275 associative objects: the
constraint network rebuilt before saving cannot write a dimensional
constraint that drives a dynamic block's constraint parameter instead of
a dimension, nor separate dependencies on single edges of one polyline.
The block parameters ended up pointing at erased objects. A group with
either link is now kept as read, through the existing preserved-group
path; ODA counts the same 1948 associative proxies before and after.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Enable the existing palette rows and BPARAMETER choices. Rotation accepts a
center, picked or numeric radius, and picked or numeric default angle.
Alignment places a tangent direction from its base point. Flip places a
reflection line and state label, with native grip and state expressions.
Extend shared graph append/capacity checks for Flip's additional state node
while preserving existing subgraphs. Keep Polar/Rotation angle labels unique
in either placement order. Add editor graphics, extents and definition
reframing through the existing overlay/history/save paths.
This milestone implements native parameter placement and persistence.
Rotate/Flip action association, reference alignment/grip editing, parameter
property editing and parameter sets remain separate work.
Validation covers command and palette placement, cancellation, local/parent
undo, save/discard, native DWG/DXF objects, existing graph preservation and
the 17 research fixtures. Broader block/dock regressions and editor renders
are also checked.
Enable the three existing palette rows and BPARAMETER choices. Pick a base,
endpoint and label location to create the appropriate native parameter, one
end grip and its location expressions in the shared authoring graph.
Render editor dimensions and labels, preserve them when reframing the block,
and include them in editor extents. Reuse local undo/redo, save/discard and
native DWG/DXF persistence. Reject incomplete or invalid placement without
changing document data or history.
This milestone implements parameter placement. Action association/evaluation,
parameter property editing, alternate grip counts and parameter sets remain
separate work.
Validation: focused placement and palette interaction checks; Block Editor and
dock regressions; native append and DWG/DXF round trips in all 17 research
fixtures, preserving existing graph data and source files; app-view renders.
Enable Point in Authoring Palettes and BPARAMETER. Pick parameter and label
positions, then create the native Point, XY grip and position expressions in
one undo transaction. Draw editor-only markers and clear placement previews.
Share graph append construction with Visibility so both types coexist in
either order. Allocate node, expression and edge IDs independently; preserve
existing objects, nodes and relationships and reject malformed/opaque graphs.
Reframe parameter, label and grip with the edited definition. Include authoring
positions in editor framing while keeping reference geometry extents unchanged.
Retain save/discard and parent saved-edit undo. Action association/evaluation
and parameter property editing remain separate milestones.
Validation: 10 targeted, 286 block and 60 dock checks passed (overlapping
filters). Appending a Point to an existing native graph passed DWG/DXF
roundtrips in all 17 local fixtures; old objects and original checksums stayed
unchanged. Real-view palette interaction and rendered marker/label verified.
Add the current-state selector, Visibility States dialog and mode/show/hide
controls to the contextual ribbon, using shared icons, tooltips, modal UI
and adaptive flyouts. Disable the controls until a Visibility parameter exists.
Stage state creation, rename, deletion, current-state changes and reordering
until OK. Support copied, show-all and hide-all new states in one undo step,
preserve native graph metadata, and restore current-state identity on undo/redo.
Implement nonsaved BVMODE and display-only reveal during BVSHOW selection.
Cancelling selection leaves saved visibility flags and history unchanged.
Keep the existing command-line state workflows available.
Validation: 6 targeted tests; 277 block, 31 app dock, 35 ribbon and 12 history
checks passed (overlapping filters). All 17 local DWG fixtures passed in-memory
DWG/DXF preservation checks with unchanged original checksums.
Milestone 1: enable Parameters > Visibility and add interactive
BPARAMETER VISIBILITY placement using the existing native visibility
parameter, grip and state engine. Bare BPARAMETER currently offers only
Visibility; other parameter, action and set entries remain unavailable.
Show the placed parameter in the editor and support cancel, local undo/
redo, save/discard and saved-edit undo. Bind placement to its document
and definition, reject duplicates and invalid points, and protect existing
authoring graphs from replacement.
Keep visibility parameters and their grips aligned with geometry when a
BEDIT UCS change reframes the definition, including parameter-only blocks.
Validation: 9 targeted tests, 272 block checks and 58 dock checks passed
(overlapping groups). All 17 local DWG fixtures passed in-memory DWG/DXF
placement roundtrips and graph-preservation checks; originals unchanged.
#1811 and #1812 add the `txt2mtxt_settings`, `import_file_dialog` and
`dgn_import_dialog` automation actions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Adds PDFSHXTEXT with the PDF Text Recognition Settings dialog, its
command-line form, the PDFSHXLAYER / PDFSHXBESTFONT / PDFSHXTEXTSETTINGS
variables and the profile settings they are kept in.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The viewport hides the system cursor for its crosshair, and the progress
card's backdrop claimed no cursor of its own, so while a drawing opened
the pointer vanished over the viewport and Cancel could not be aimed at.
The backdrop now shows the arrow. (#1727)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A radius placed its text where it was clicked, on the line through the
centre and the arc point, whatever DIMTAD said; outside the circle the
line stopped at the text's near edge, so the text sat on the end of the
line. DIMTAD now lifts aligned radius text off that line as it already
does on a diameter, and an outside line runs on under the text to its far
end. A text point already off the line (a file saved elsewhere) is kept
as the text's middle. (#1675)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A left drag only became a lasso/window after the button had been held
150 ms, however far the cursor had moved. A fast flick released inside
that delay read as a click and armed a click-click box instead. A press
that has moved more than 12 px is now a drag at once; the delay still
keeps small movements of a click from becoming one. (#1808)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The DGN V7/V8 readers expose each element (level, symbology, geometry,
complex chains, text nodes, shared cells). DGNIMPORT / -DGNIMPORT convert a
model with the Standard mapping into a new drawing; IMPORT opens the
Import File window and routes PDF and DGN files to their importers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A request settles once the work it started reports back, and waits for
any open or save in progress. When that never happens the bridge stayed
busy: every later request, `cancel` included, was refused until the app
was killed. `cancel` now ends the active command and closes any pending
request as cancelled, not only interactive picks. (#1801)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste adds entities to the document directly, so the fill and raster
models `add_entity` seeds were never built. An associative hatch got its
model back when its pasted boundary rebuilt it; a non-associative one
stayed in the drawing but was never drawn. Seed the fill, image and
underlay models of the pasted entities. (#1807)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
TEXT and MTEXT objects are merged into one MTEXT (top-down or in
selection order, word-wrapped or one paragraph per object, with the
original pitch kept as line spacing) or each TEXT and MTEXT line becomes
an MTEXT of its own. The SEttings option opens the Combine Text settings
dialog; the settings persist as profile values and are exposed as the
TXT2MTXT* variables and the txt2mtxt_settings automation action.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Import File split button (PDF Import / DGN Import / Import), Recognize
SHX Text, Recognition Settings and Combine Text; Land XML moves to the
panel slide-out and Open leaves the panel. Ribbon commands may be menu
macros (`;` answers the running command's prompt). KeyTips IF, PI, DI,
OI, PS, PT, TM; labels in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Block Attribute Manager: the error band's dismiss button is the close
icon, not a "×" glyph the web build may not have.
- Two signatures wrapped to the 100-column limit.
- MCP tool schema digest updated for the new `block_def_dialog` and
`attman_dialog` actions.
- Measurement docs: MEASUREGEOM's Quick mode.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PDFIMPORT follows FILEDIA and -PDFIMPORT asks for the file, page,
insertion point, scale and rotation on the command line. A page with a
viewport measure is imported in its measured units. Straight polylines
that trace arcs, circles and ellipses, and runs of circular Bezier arcs
on one circle, become those objects; other Bezier curves become one
SPLINE each.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add a dockable Block Editor palette with selectable Parameters, Actions,
Parameter Sets and Constraints pages, reusing shared dock controls, icons
and ribbon-style hover bubbles.
Parameters, Actions, Parameter Sets and Block Properties Table are UI
catalogs only. Their entries remain disabled; this commit does not add
parameter placement, dynamic action behavior, parameter-set authoring or
block properties table functionality.
The Constraints page connects its geometric and dimensional entries to
existing ribbon commands. It reuses their implementations and adds no new
constraint behavior.
Keep the palette specific to BEDIT and retain its placement and selected
page across closing/reopening and Test Block. Opening, closing, switching
pages and clicking disabled entries preserve the document, undo history
and any running command.
Validation: 7 palette tests, 57 dock checks and 46 ribbon checks passed
(overlapping groups); rendered pages inspected and native debug build passed.
The codec now decodes version-0 (2010 release) constraint groups, so the
parametric constraints of such drawings load and their dynamic
dimensions show (#992). Constraint groups also keep their next node id.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
MEASUREGEOM gains a Quick option. As the cursor moves, the nearest
drawn geometry along the working plane's X and Y lines through it is
measured live: cyan measurement lines and a Horizontal/Vertical readout
by the cursor. A click prints the current readout and keeps measuring;
Enter ends the command. The rays go through the scene's interaction
index, so large drawings stay responsive.
A structure-pick command whose miss message is empty now gets the click
as a plain point instead of an error.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every plotted wire and hatch resolves to its entity's layer, and the PDF
wraps each run of same-layer items in an optional-content group, so a
viewer's layer panel lists the drawing's layers and can hide them. Draw
order is unchanged; images stay outside any group. Expanded block
geometry goes with its INSERT's layer.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Plugins read the host's document through a shared reference across the
dynamic-library boundary, and the entity index hashed with foldhash's
per-process seed, so every handle lookup from the plugin missed. The
codec now uses a fixed hasher (opencadcodec f385f75; kernel 9841749,
graph e9c23ad).
The Python IPC suite also caught up with intended changes: ATTDEF
renders its tag, DXF now keeps the lock-position flag, and the modify
audit turns associative arrays off since it checks loose copies.
The rate-limiter test waits for the host's check instead of a fixed
sleep that raced on macOS, and ENV_LOCK no longer cascades a poisoned
lock into every later test.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add the no-selection Block section with annotation, orientation, scaling, exploding, units, description and hyperlink controls. Integrate definition edits with editor history, save checkpoints and discard, and keep staged text tied to its definition.
Persist annotation and hyperlink metadata on the block record, migrate legacy marker values on edit, and honor orientation and hyperlink descriptions during block creation. Cover native DWG/DXF roundtrips and replacement after reopening.
Avoid rebuilding derived caches and clearing tessellation memos when closing the block editor on clean exit or discard. Scope entity delta computation to block record members instead of scanning and cloning the entire drawing, and add a fast path to the dirty check when no local commands were executed.
With dynamic UCS on (UCSDETECT 1, toggled with F6), a command's first
point picked on a planar face of a solid sets the UCS to that face for
the rest of the command, so 2D commands draw on the face (#1711). An
unsnapped first point lands on the face itself; a snapped point off the
face's plane belongs to other geometry and leaves the UCS alone. The
previous UCS comes back when the command ends. UCS commands themselves
are left out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Options → User Preferences → Navigation style picks which mouse
gestures pan and orbit the model view (#1480):
- CAD (default): middle button pans, Shift + middle button orbits.
- Blender: middle button orbits, Shift + middle button pans.
- CATIA: middle button pans; pressing the left button during it orbits,
so 3D navigation needs only the mouse.
An armed orbit tool always orbits. The choice is saved with the user
settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cargo: codec d36331d, kernel 60f086b, graph 74aac56.
The table model and its file codec now live in `codec::plot_style`
(opencadcodec#53) and are re-exported here. What stays is where tables
come from: the plot styles folder, the session registry, the shipped
tables, and saving to disk, as the `PlotStyleTableExt` trait.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A selected block reference is previewed from its definition placed by
the reference's transform; the no-objects band is amber.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Live changes are taken back quietly before Apply, OK or Sync write the
list again, so each leaves exactly one undo step even when something
closed the open live step in between; Cancel takes them back without a
command-line notice. References keep their values through renames made
live.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
