`bool::then_some` evaluates its argument eagerly, so starting SHELL or
SOLIDEDIT with nothing selected indexed an empty vector and aborted the
application. The single-solid target now comes from a slice match.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Select arc or circle / Dimension text / dimension line location / value or
name prompts with a radN parameter, invalid-selection, miss, duplicate and
invalid-expression messages, negative values as magnitudes, a dynamic radial
dimension on the constraints layer drawn as the reference does (mid-radius
text on the center-to-rim line, no hook, no center mark, one text grip), the
stored text position following the radius, center-anchored resizing, the
Properties title and Constraint section, DIMCONSTRAINT's Radius default,
the small-button Dimensional ribbon grid and tooltip descriptions.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
DCANGULAR picks two lines, an arc or three points, takes the dimension
line location to choose the sector and the value or name, and creates the
dynamic two-line or three-point angular dimension driven by an angN
parameter. Reference messages for invalid, repeated and parallel sides,
existing names and invalid names; angle values display within one turn at
the angular precision; the first side (or vertex and first point) stays
when the value changes; the ribbon Dimensional panel follows the reference
order.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Placements (entity lookups, intersections, String labels, projections)
recomputed per view() and per mouse-move hit-test, with overlay re-clones
and 2-3x offset recomputes. New constraints_epoch bumped on every set
mutation/visibility/undo/DWG-load (plus new set_constraint_enabled API);
single-slot Arc<[GlyphEntry]> memo on an 11-field key (hover/selection
excluded); overlay de-cloned/de-duped to the single geometry source;
hit paths reuse the cache.
Tests:
- cached_glyph_placements_hit_returns_same_arc: same-key Arc identity
- cached_glyph_placements_invalidated_by_metadata_edit: edit + selection change yield new Arc
- glyph_hit_test_entries_matches_precomputed_boxes: shared hit-test helper
Bench (cargo bench glyph, 60 constraints): 8.18us -> 0.05-0.15us (~55x).
A/B reference deleted.
DCFORM sets the annotational or dynamic form and continues into the
DIMCONSTRAINT option prompt, whose wording and last-used default match the
reference. -PARAMETERS manages parameters from the command line; a
double-clicked constraint dimension opens its value prompt. Dynamic
dimensions rescale on every camera change and their display overrides stay
out of the saved file. A driving dimension between an entity's own ends no
longer has its length retained, so a new value moves the second point along
the dimension axis; parameter edits hold the first constraint point.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
The dynamic dimension of a dimensional constraint is now linked in the
drawing file (AcDbAssocDependency + AcDbAssocDimDependencyBody on the
constraint node), reread on load, hidden by DCHIDE/DYNCONSTRAINTDISPLAY
and never plotted; it carries a lock mark before its text. New
CONSTRAINTNAMEFORMAT and DYNCONSTRAINTDISPLAY variables and the
DIMCONSTRAINT option front end. A transformed entity whose own end points
a driving dimension measures keeps only the first constraint point, so a
scaled line returns to its dimension value.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
DCLINEAR, DCHORIZONTAL, DCVERTICAL and DCALIGNED follow the reference flow:
`Specify first constraint point or [Object] <Object>:`, `Specify second
constraint point:`, `Specify dimension line location:`, then `Dimension
text = …` and `Enter value or name and value <d1=100>:`. Linear reads
horizontal or vertical from the dimension line location the way a linear
dimension does; Object takes a line's, an arc's or a polyline segment's
ends. A miss reports `No valid constraint point found.` / `No object
found.` and asks again; another object type reports `Invalid selection for
Linear. Select a line, polyline segment or arc.`.
Each constraint creates a drawing parameter (`d1`, `d2`, …, or the typed
`name=expression`), drives the constraint through it, and draws a dynamic
dimension in constraint gray whose text follows CONSTRAINTNAMEFORMAT
(`d1=100.0000`); the dimension is associated with the constrained objects
and its text is refreshed after every solve. A typed value other than the
measured one moves the second point while the first stays, and so does a
later parameter edit. Deleting the constraint removes its dimension and,
when nothing else reads it, its parameter.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Equal was applied through a generic gather-then-apply flow and, with the
default size-retaining solve mode, never changed anything: the solver
held both sizes and the relation could not be met. Now:
- GCEQUAL joins ECONSTRAINT and GEOMCONSTRAINT Equal; both objects are
picked inside the command (`Select first object or [Multiple]:`,
`Select second object:`; Multiple gathers `Select objects to make equal
to the first:`), a selection made beforehand is not used, a miss says
`No object found.` and re-asks, an unsupported object or the same object
twice is reported and re-asked, a repeat is refused.
- The follower is resized in place before the relation is added: a line or
straight polyline segment keeps its start and direction and its end
moves to the first object's length; a circle or arc keeps its center and
takes the radius.
- During edits the side that is not being edited follows the same rule:
its size is not retained, its start (or center) and other vertices are
held and its direction kept, so only its length or radius changes; a
chain of Equal relations follows along.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
1) VCONSTRAINT (and the new GCVERTICAL name) uses the axis constraint flow:
"Select an object or [2Points] <2Points>:", 2Points mode with the
reference's re-prompts and messages, and the same object types as
Horizontal — line, polyline segment, text, MText, ellipse axis.
2) Object mode turns the object about its first vertex; a two-point relation
across two objects slides the second object rigidly onto the axis.
3) Re-applying an axis constraint reports that the constraint already
exists; Vertical follows the UCS Y direction.
4) The constraint bar draws Vertical as the reference's axis mark, with the
point marker for a two-point relation.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
1) FXCONSTRAINT (and the new GCFIX name) prompts "Select point or [Object]
<Object>:" — a pick fixes that constraint point; Enter or O asks for one
line, polyline segment, circle, arc, ellipse or spline; misses and
unsupported objects report the reference messages and re-prompt.
2) Point, block, text, MText, attribute and table insertion points are
addressable constraint points.
3) Re-applying Fixed to the same point or object reports that the constraint
already exists instead of adding a duplicate.
4) A persistent Fixed holds its pre-edit geometry through MOVE, ROTATE,
SCALE, STRETCH, grip and Properties edits: fixed points stay, free points
of a partly fixed entity follow the edit, and size retention skips fixed
entities.
5) Object mode on a polyline fixes the picked segment (natively persisted)
instead of the whole polyline; arc segments pin endpoints, center and
radius.
6) Ribbon label "Fix" with a padlock icon.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Retaining a line's length added a P2PDistance constraint, whose gradient
divides by the current distance. For a zero-length line the solver got a NaN
Jacobian and its SVD fallback never returned, freezing the editor (e.g.
ECONSTRAINT on a line drawn by clicking one point twice). Hold coincident
endpoints together with per-axis differences instead.
Control-point splines read without knots are given a degree their control
points can carry (at most n - 1) and a clamped knot vector when a drawing
loads. Generating knots for fewer points than the degree underflowed during
DWG write: a panic in debug builds, an unbounded allocation in release, and
reachable from autosave. A lone control point with no knots or fit points is
purged as corrupt.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.
ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.
Object snaps gain a one-shot "None" override. New strings in all locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
- IMAGEEMBED: pack raster images into OLE2FRAME entities so a .dwg is
self-contained; 'Embed Image' entry in the XREF attach menu; control/MCP
op embed_image for external tools; dxf_name for OLE2FRAME queries.
- Scene: populate_images_from_document now rebuilds OLE2FRAME and PDF
underlay models too (they used to vanish after any XREF op).
- Printing: add PRINTER_ENUM_NETWORK pass when listing printers; GDI
spooler fallback (hayro raster at 300 DPI + StretchDIBits) for hosts
whose PDF handler registers no print verb; DEVMODE orientation with a
90-degree raster rotation fallback for v4 drivers; fix the fit-scale
precedence bug that printed blank pages.
- PDF export dialogs on Windows use the async file dialog so the native
overwrite confirmation no longer deadlocks the UI thread.
- Plot dialog: persist the chosen printer (saved on selection) and the
picked plot window across sessions; page setups with no device no
longer reset the output device.
- Community fonts: detect unresolvable .shx references on open and offer
a download from the repository's fonts/ folder (contribution guide in
fonts/README.md); custom font source URL setting for intranet font
servers; downloaded fonts resolve from the per-user fonts directory.
Hakan Seven