The Options window used to commit every control the moment it was
touched, with no way back but re-editing. It now works like the Drafting
Settings window: changes still show at once (a theme, a cursor size or a
language is seen immediately), but nothing is committed until Apply or OK.
Close — and the window's × or Esc — puts everything back the way it was
when the window opened or Apply was last pressed, asking first when there
is something to lose.
The commit point is a snapshot of the persisted configuration plus the
drawing variables the 3D Modeling page edits (with the drawing's modified
flag), so every control the window has or gains is covered without being
registered; reverting re-applies the snapshot the way start-up does and
re-bakes text or regenerates solids when those settings moved.
The "unsaved changes" guard is now a shared modal helper used by both
windows.
Co-Authored-By: Claude Opus 5 <[email protected]>
- PSETUPIN / -PSETUPIN: with no arguments a file picker offers the chosen
drawing's named page setups in the Plot dialog; `PSETUPIN <file>` opens
the same chooser on that file; `PSETUPIN <file> *` or
`PSETUPIN <file> name,name` import straight away. Same-named setups are
replaced, the import is one undo step, and the report counts both.
- The Plot dialog's page-setup list gains "Import…": the chooser shows the
source drawing's setups with a tick each, All, Import and Cancel, and
selects the first imported setup afterwards. The source is read off the
UI thread with the same reader the editor uses for its own setups
(`scene::document_page_setups`), and handles that only meant something
in the source drawing (plot view, visual style) are dropped on import.
- Options → General → Plotting: "Show the page setup for new layouts"
opens the Plot / Page Setup dialog whenever a layout is created
(persisted with the plot preferences).
Tests: the document reader, the command (all / named / unknown / missing
file / undo) against a drawing saved by the app, the chooser flow, and the
new-layout option. Nine new strings in all 21 locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Plot dialog:
- "Units" (millimetres / inches) is the page setup's own unit: the offsets
and the custom scale are shown in it, the stored ratio converts with it
so the plotted result and the paper space's unit stay the same
- "Custom: [paper] mm = [drawing] units" spells the picked scale in that
unit and accepts a typed ratio, which selects the list's name for it or
becomes a ratio entry of its own
- "Hide paperspace objects" is the page setup's plot-hidden flag; it is no
longer derived from the "Hidden Line" shade mode
- "Save changes to layout" (paper layouts, on by default) writes the dialog
into the layout when a plot is sent; previews never touch it
- offsets are labelled in the page-setup unit and kept in millimetres in
the file
System variables (typeable, through SETVAR, listed by SETVAR ?):
- PLOTOFFSET, PAPERUPDATE, PLOTROTMODE, PLOTTRANSPARENCYOVERRIDE and
BACKGROUNDPLOT live with the persisted plot preferences: the plot origin
counts from the printable corner unless PLOTOFFSET says the paper edge;
a printer that does not list the sheet either warns or switches to its
default sheet; transparency can be forced on or off; BACKGROUNDPLOT bit 1
is the dialog's background switch and bit 2 drives batch plots
- CTAB and TILEMODE read and switch the current layout
Tests cover every new control and variable; six new strings in all 21
locales; the Plot dialog grows to 940×690 for the two extra rows.
Co-Authored-By: Claude Opus 5 <[email protected]>
The Display page could only take a typed #RRGGBB, which is precise but
no way to choose a colour by eye. The swatches are now buttons that
open a wheel.
The wheel does not replace the hex field, it sits beside it: typing an
exact value stays the quickest way to reproduce a known colour. On
submit it hands a hex string to the existing ModelSpaceBgChanged and
friends rather than writing the config itself, so the two routes
cannot drift apart on validation, persistence, or the MatchTheme
fallback an empty field triggers.
Also stops the Browser shipping in the default dock layout. It was
added to the right edge, which shifted the block palette to index 1
and broke four dock tests that encode the existing arrangement. Those
tests were right and the change was wrong: the earlier commit claimed
to leave the layout alone. BROWSER now docks the panel on first use,
so nobody's edges rearrange on upgrade for a panel they never asked
for.
A docked outline of the drawing: the three origin planes, the open
sketch, and every solid labelled with the operation that made it,
recovered through primitive_property_operation. Rows run ordinary
commands, so clicking a plane starts a sketch on it and clicking a
body selects it.
It is a table of contents, not a feature tree. The DWG history records
how each solid was built but nothing re-runs it, so an earlier feature
cannot be edited to rebuild the ones after it. Presenting the list as
editable history would promise exactly that, so the panel states what
it is instead.
Off by default and opened with BROWSER, leaving the existing dock
layout alone for anyone who does not want it.
The toolbar Help button was a disabled tip that could never be clicked. It now opens a modal window explaining the manager on the web build: read-only reference list, disabled Attach/Refresh/Change Path (no filesystem access or native file pickers, so no add/reload/repath and no previews), nested read-only rows, and saved-drawing requirement for relative paths.
Includes a Report-an-issue button opening the GitHub issues page and a Close button; wired as ModalKind::XrefHelp through the shared modal frame so dismissal works on native and web.
The Snap and Grid tab showed static grid values with dead checkboxes, and every grid line stroked identically.
Grid X/Y spacing and Major-line-every are now editable inputs (validated 2-100 for majors, dirty-tracked, applied with an error message on bad input); Adaptive-grid and Display-beyond-Limits checkboxes are wired to live state. Every Nth line partitions into major_segments and strokes subtly brighter (1.5x alpha, 0.75px) for the reference hierarchy. GRIDMAJOR state persists to UserSettings. Covers partition, invalidation, and parse tests.
The viewport grid ignored the configured spacing and forced square grids: compute_grid_step hardcoded a 1.0 base, a single shared step drove both line families (including the tangent derivative used for gap measurement), and the display always clipped to LIMITS despite the beyond-Limits option.
Grid spacing now scales per-axis from GRIDUNIT via compute_grid_steps (adaptive 5x growth, fixed passthrough), GridParams carries step_x/step_y, snap tolerances follow the visible steps, and the LIMITS clip is skipped when beyond-Limits is set. Also fixes a per-axis overflow fallback that returned the X base for Y. Spacing state (X/Y, adaptive, beyond-Limits) is stored on the app and persisted to UserSettings at defaults; dialog wiring follows separately.
Comments and the Options help text describe the behaviour of commercial
solutions without naming any product. The command menu puts the command's
keywords directly under Enter / Cancel, with Recent Input and Snap
Overrides below them, so the choices that change from step to step are the
closest to the pointer.
Co-Authored-By: Claude Opus 5 <[email protected]>
The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.
ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.
Object snaps gain a one-shot "None" override. New strings in all locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Rows are 22 px (as the grip popup), the edit menu drops Select All and
Zoom Extents (both stay on the idle menu, matching the commercial solutions' edit menu),
and cursor-anchored panels now reserve the overlaid prompt lines
(CLIPROMPTLINES) as well as the input row, so a long menu is never hidden
behind the command area — it scrolls inside the visible canvas instead.
The automation port gains `pointer_right_press` / `pointer_right_release`
actions so scripts and MCP clients can exercise the context menu.
Co-Authored-By: Claude Opus 5 <[email protected]>
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).
Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.
LINE gains options() (Close/Undo/eXit).
Co-Authored-By: Claude Opus 5 <[email protected]>
Properties… next to the printer used to open the CUPS web interface in a
browser. It now edits the driver options of the *selected* printer the
way LibreOffice's Properties… does, without leaving the plot dialog:
- CUPS platforms (Linux, any desktop; macOS): an in-line editor lists the
printer's PPD options as `lpoptions -l` reports them — media type,
colour mode, quality, duplex, trays, scaling — with readable choice
labels, Reset / Cancel / Apply. Apply keeps only the choices that differ
from the driver defaults, per printer, in the plot config, and every job
for that printer passes them as `lp -o key=value`. Where CUPS cannot
answer, the desktop's printer settings panel opens instead of a browser.
- Windows: the driver's document-properties sheet (`DocumentPropertiesW`
with prompt, owned by the main window) and, on OK, the result stored as
the user's printing preferences for that printer (`SetPrinter` level 9),
which the job honours. `printui /e` (printing preferences) replaces the
device-properties sheet as the fallback.
The desktop print portal was tried first and dropped: GTK 4's print
dialog loses the preselected printer when the default queue is listed
before it, so the dialog always opened on the wrong printer.
Dialog layout: the modal grows to 940×620; Printer / plotter and Paper
size share a line with their pickers (long queue and media names now fit);
Copies + Properties… and Custom… sit beneath; the custom-sheet editor
labels each margin (Left / Right, Top / Bottom) and shows the unit.
Also recognises `none_device`, AutoCAD's stored spelling for "no plotter",
and writes it back unchanged.
Tests: `lpoptions` parsing and keyword humanising, the editor flow (load,
stale answer ignored, set, apply, remember, reset, error, cancel), device
name round-trips including `none_device`.
Co-Authored-By: Claude Opus 5 <[email protected]>
- IMAGEEMBED: pack raster images into OLE2FRAME entities so a .dwg is
self-contained; 'Embed Image' entry in the XREF attach menu; control/MCP
op embed_image for external tools; dxf_name for OLE2FRAME queries.
- Scene: populate_images_from_document now rebuilds OLE2FRAME and PDF
underlay models too (they used to vanish after any XREF op).
- Printing: add PRINTER_ENUM_NETWORK pass when listing printers; GDI
spooler fallback (hayro raster at 300 DPI + StretchDIBits) for hosts
whose PDF handler registers no print verb; DEVMODE orientation with a
90-degree raster rotation fallback for v4 drivers; fix the fit-scale
precedence bug that printed blank pages.
- PDF export dialogs on Windows use the async file dialog so the native
overwrite confirmation no longer deadlocks the UI thread.
- Plot dialog: persist the chosen printer (saved on selection) and the
picked plot window across sessions; page setups with no device no
longer reset the output device.
- Community fonts: detect unresolvable .shx references on open and offer
a download from the repository's fonts/ folder (contribution guide in
fonts/README.md); custom font source URL setting for intranet font
servers; downloaded fonts resolve from the per-user fonts directory.
Port press-to-capture dialog safeguards to the alias editor: transient top draft row with explicit accept, duplicate-alias and unknown-command danger styling plus persistent banners, reset-to-defaults with inline confirmation, Apply and Apply-and-Exit, alias count, Esc-cancels-draft-first, and unsaved-changes guard on close.
Right-click actions bound to the row under the cursor, split-button toolbar groups with shared borders and hover states, and a notice when an operation needs a selection first.
Constraint delete: a Properties-panel row delete button, viewport
click-to-select on a constraint glyph pill with Delete-key support, and a
right-click "Delete Constraint" menu item — all routed through one
undoable Scene::selected_constraint-aware path.
Fixes two named-parameter bugs found while testing that feature:
- DIMCONSTRAINT: a parameter named like a mode-switch keyword ("r", "d",
"a", "x", "y") could never be referenced, since the keyword check ran
before the parameter-name check.
- PARAMETERS modal Apply rebuilt Scene::named_parameters but never
refreshed the Properties panel, leaving renamed/deleted rows stale
until an unrelated refresh (e.g. a selection change) happened to occur.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Hakan Seven