2D elements: plane stress, plane strain and axisymmetric sections on the DOF framework; mesh.planar (M4) (#39)

Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.


Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>

ROADMAP.md

@@ -22,7 +22,7 @@ hex meshes today and it gives the best elements where stresses are read.
 | M1 Geometry in and surface preparation | Open `.solidcraft` designs with persistent face names, assemblies placed (done); face-tagged 3MF (done); test corpus, `cargo xtask corpus` (done); exact predicates (done); quality metrics and certified validity gate (done); weld, closed/manifold/orientation and self-intersection checks, feature edges (`modelcraft-mesh::surface`, `mesh.surface.check`, done) | in progress |
 | M2 Tet meshing and size field | Size field (global, per face and edge seeds, curvature and proximity; the `modelcraft_mesh::size::SizeField` trait and edge-division helpers are in); Bowyer–Watson Delaunay (exact, symbolic perturbation, verified; `modelcraft-mesh::delaunay`, done); robust CDT boundary recovery (Diazzi et al. 2023: implicit LNC Steiner points on segments, gift-wrapping facet recovery, inside/outside labelling, B-rep face tags on boundary tet faces, few-ulp rounding repair checked by the validity gate; `modelcraft-mesh::cdt` and `mesh.tet.generate`, done: all 20 valid corpus parts); Delaunay refinement, ODT smoothing, sliver removal; tet4 and tet10 with mid-side nodes on the B-rep; mesh verify per set | in progress |
 | M3 First deck | Sets and surfaces bound to SolidCraft face, edge, vertex and body names, resolved after meshing; materials (isotropic and orthotropic elastic, density) with a unit-system label and consistency check; sections (solid, shell, beam profiles) assigned by set; element formulation per region mapped to each solver; BCs (fixed, displacement, symmetry); loads (force and moment on reference points, pressure, gravity); reference points with kinematic and distributing coupling; steps (linear static, frequency) with explicit per-step load and BC tables and output presets; `model.check` naming every missing or bad item; `model.*` and `mesh.tag` commands (model definition: done); writers for Abaqus input (done: `deck.write`), Nastran SOL 101/103 (done: `deck.write`) and LS-DYNA implicit (done); the `.modelcraft` file (text definition, binary mesh, geometry references reopened on load, journal; atomic saves, autosave and recovery; undo/redo on the journal: done) | in progress |
-| M4 Own solver and first results | Element library per docs/elements.md (1D and 2D first); Linear static and modal solver (tet4/10, wedge6, hex8, hex20; sparse direct, Lanczos), verified against analytic solutions (solver: done — `modelcraft-fem` kernels, `modelcraft-solver` with nested dissection, sparse Cholesky and block Lanczos, `solve.static`/`solve.frequency`/`solve.probe`, patch, cantilever, Lamé, Kirsch and beam-frequency tests; reference points with kinematic and distributing couplings and moments by master–slave constraint elimination, verified by rigid motion, clamping, Saint-Venant tension, bending and tube torsion); results display (done: `results.*` commands, deformed shape to scale, banded contours of displacement, von Mises, principal and component stresses with a legend, mode shapes with their frequencies and animation, probing a node by clicking it, reaction force and moment sums per set, stale results marked after an edit; explicit steps: field frames by slider or animation with contours per frame, energy histories plotted) | started |
+| M4 Own solver and first results | Element library per docs/elements.md (1D and 2D first); Linear static and modal solver (tet4/10, wedge6, hex8, hex20; sparse direct, Lanczos), verified against analytic solutions (solver: done — `modelcraft-fem` kernels, `modelcraft-solver` with nested dissection, sparse Cholesky and block Lanczos, `solve.static`/`solve.frequency`/`solve.probe`, patch, cantilever, Lamé, Kirsch and beam-frequency tests; reference points with kinematic and distributing couplings and moments by master–slave constraint elimination, verified by rigid motion, clamping, Saint-Venant tension, bending and tube torsion; 2D elements: plane stress, plane strain and axisymmetric tri3, tri6, quad4 (incompatible modes QM6), quad8 with two degrees of freedom per node, centrifugal loads, `mesh.planar` 2D meshes of polygons and planar faces, verified by patch tests, Kirsch, Lamé (plane strain and axisymmetric), rotating discs and cylinders, and a plane stress cantilever; deck mapping to Abaqus CPS/CPE/CAX, Nastran membranes, LS-DYNA ELFORM 12/13); results display (done: `results.*` commands, deformed shape to scale, banded contours of displacement, von Mises, principal and component stresses with a legend, mode shapes with their frequencies and animation, probing a node by clicking it, reaction force and moment sums per set, stale results marked after an edit; explicit steps: field frames by slider or animation with contours per frame, energy histories plotted) | started |
 | M5 Structured hex | 2D quad meshing of faces (`modelcraft-mesh::quad`: transfinite mapped meshes, free all-quad meshes of polygons with holes on prescribed boundary nodes, exact planar quad validity, shared `SizeField` and even edge divisions; done for planar faces); mapped hex of six-sided regions; sweep meshing; conforming interfaces and tet–hex transition; automatic decomposition into sweepable and mappable regions, proposed as SolidCraft splits | started |
 | M6 Automatic hex | Octree/grid-dual all-hex for any part; hex-dominant by tet recombination; polycube for blocky parts; smoothing, untangling, boundary padding, layers through thin walls; mesh editing and orphan-mesh import | planned |
 | M7 Assemblies and contact | Part instances from SolidCraft occurrences; tie between non-matching meshes; general and pairwise contact with automatic pair detection, friction; bolt pretension, springs, point masses; amplitudes, multiple steps; nonlinear static steps in decks | planned |