verification: nonlinear oracle cases and the nonlinear solver's documentation

Theory cases for the nonlinear solver, each frozen as a fixture: uniaxial
stretch of a neo-Hookean block to twice its length (closed form), the
nonlinear patch test on a distorted hex8 mesh, a quarter turn of the same
mesh (objectivity: zero stress), the elastica of a hex20 cantilever at
P L²/(E I) = 1, 2, 5, 10 against Bisshopp–Drucker (0.2–0.5 %), and the
inflation of a thick neo-Hookean tube by a follower pressure against
Rivlin's closed form (0.08 % at the bore). A finite-strain Cook's membrane
is pending its transcribed reference. docs/fem.md describes the
formulation, the material point interface, the follower-pressure choice and
what nonlinear steps refuse; the literature, parity and roadmap pages
follow.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

docs/parity.md

@@ -44,7 +44,7 @@ products are run, no documentation text is copied). Status: **done**, **started*
 | Mesh | Mesh editing (move, merge, split, collapse, remesh region), imported orphan meshes | M6 | yes | started (node/element add/remove) |
 | Model | Sets and surfaces bound to geometry names | M3 | yes | done |
 | Model | Materials: elastic (isotropic, orthotropic), density, unit-system check | M3 | | done |
-| Model | Materials: plasticity, hyperelasticity, damage, thermal | M8 | | started (von Mises plasticity: bilinear, table, Johnson–Cook; Johnson–Cook damage, erosion; written to Abaqus `*PLASTIC`, Nastran `MATS1`, LS-DYNA plastic materials where expressible) |
+| Model | Materials: plasticity, hyperelasticity, damage, thermal | M8 | | started (von Mises plasticity: bilinear, table, Johnson–Cook; Johnson–Cook damage, erosion; written to Abaqus `*PLASTIC`, Nastran `MATS1`, LS-DYNA plastic materials where expressible; compressible neo-Hookean for nonlinear steps, Abaqus `*HYPERELASTIC, NEO HOOKE`) |
 | Model | Sections: solid, shell, beam profiles; assignment by set | M3 | | done |
 | Model | 2D sections: plane stress, plane strain, axisymmetric (XY plane, Y the axis); element edges in sets; centrifugal load | M4 | | done |
 | Model | Composite layups, material orientations, continuum shells | M8 | yes | planned |
@@ -53,7 +53,7 @@ products are run, no documentation text is copied). Status: **done**, **started*
 | Model | Loads: force and moment, pressure, gravity, body force | M3 | | done |
 | Model | Reference points, kinematic and distributing coupling | M3 | | done |
 | Model | Steps: linear static, frequency; output presets | M3 | | done |
-| Model | Steps: nonlinear static, explicit dynamics, heat transfer; amplitudes | M7–M8 | | planned |
+| Model | Steps: nonlinear static, explicit dynamics, heat transfer; amplitudes | M7–M8, M15 | | started (nonlinear static with nonlinear geometry, increments and tolerances, written to Abaqus `*STEP, NLGEOM` and LS-DYNA implicit, refused by Nastran; explicit dynamics; heat transfer; amplitudes planned) |
 | Interaction | Tie between non-matching meshes | M7 | | planned |
 | Interaction | Contact (general and pairs), friction, automatic pair detection | M7 | | planned |
 | Interaction | Springs and dashpots (ground or two-point; DOF, vector or line), point masses with rotary inertia | M4 | | done (implicit; explicit translational; all three decks with what each cannot take reported) |
@@ -63,6 +63,7 @@ products are run, no documentation text is copied). Status: **done**, **started*
 | Decks | LS-DYNA keyword writer (implicit; explicit in M8) | M3 | | done (implicit static and eigenvalue; beam sections planned) |
 | Decks | Readers keeping unknown keywords | M9 | | planned |
 | Solve | Own linear static and modal solver, verified against analytic solutions | M4 | yes | started (solid elements: tet4, tet10, wedge6, hex8, hex20; 2D plane stress, plane strain and axisymmetric tri3, tri6, quad4 (full, incompatible modes), quad8 (full, reduced); quad4/tri3 MITC shells and Timoshenko beams with profiles, mixed with solids; reference points, kinematic and distributing couplings, moments; centrifugal loads) |
+| Solve | Own nonlinear implicit solver: Newton–Raphson with line search and automatic increments, total Lagrangian solids and 2D elements, mixed u–p at finite strain, follower pressure | M15 | yes | started (solids, plane strain, axisymmetric; St Venant–Kirchhoff and neo-Hookean; verified by the elastica, tube inflation, patch and objectivity tests; plasticity, shells, contact, arc-length next) |
 | Solve | Own explicit dynamics solver (central differences, one-point hex8 with hourglass control, nodal-pressure tet4, bulk viscosity, energy balance), verified against analytic wave and impact solutions | M10 | yes | started (X1 core and X2: large deformation, objective rates, J2 and Johnson–Cook plasticity, damage, erosion; contact planned) |
 | Results | Deformed shape, contours, mode shapes, probes, reaction sums | M4 | | started (results in the session, `solve.probe`, reaction sums; display planned) |
 | Results | XY and path plots, cuts, display groups, free-body forces, animation | M9 | | planned |