Tet mesh quality: one validity criterion, Delaunay refinement, ODT, Klingner–Shewchuk, tet10

The end-to-end demo met a raw-CDT sliver that the validity gate accepted (exactly positive) and
the solver refused. Now:

- One validity criterion, `fieldcraft_model::admissible_jacobian` (normalized Jacobian above
  1e-12), used by the implicit solver (fem `positive_inverse`), the explicit tet4/hex8
  kinematics and the mesh gate, which proves it on the whole element (tet4: the solvers' own
  Jacobian; curved kinds: a Bernstein floor), so whatever passes the gate passes the solvers.
- CDT rounding repaired by flips on the rounded mesh (Diazzi et al. 2023 §5.1) instead of the
  ±2-ulp nudge.
- `fieldcraft-mesh::tet`: a mutable tetrahedral complex whose every change is a checked
  replacement (positive and admissible tetrahedra, faces matched with opposite orientation) with
  an exact undo log; edge removal (Klincsek), multi-face removal, Delaunay insertion with
  boundary faces, edge collapse; a curvature- and thickness-graded size field; constrained
  Delaunay refinement with encroachment splits; ODT smoothing; the Klingner–Shewchuk schedule;
  boundary vertices moved onto the exact B-rep surfaces at the end; tet10 with mid-edge nodes on
  the geometry.
- `mesh.tet.generate` gains size, order, quality, quality_target, curvature_angle, grading,
  max_passes, max_points and reports the CDT's and the mesh's quality; `solve.probe` takes a set
  and reports its largest von Mises stress.
- Oracle cases filleted-bracket-fillet-stress(-coarse): the fillet's peak von Mises stress on
  tet10 meshes of 2k and 13.5k elements, 213.3 MPa (a four-level study stays within 1.8%); the
  CDT cases keep the raw tetrahedralization.
- Corpus quality columns: all 20 valid parts mesh and pass the gate.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

docs/oracle.md

@@ -2,7 +2,7 @@
 
 Generated by `cargo xtask oracle` from [`tests/oracle/`](../tests/oracle/); the policy is [verification.md](verification.md). Every case is our own model, built with FieldCraft commands from the problem's published description, and compared with the reference value its `expected.json` cites, within the stated tolerance and for the stated reason. Accepted results are frozen in each case's `fixture.json`: a later change that moves one beyond its band (10⁻⁹ of its size) fails CI even while the reference still passes. No reference value was produced with a commercial product.
 
-**170 of 176 quantities pass** (6 known failure(s)) in 50 active cases: 41 theory, 9 published benchmark, 0 experiment; 9 pending cases wait for capabilities still being built.
+**174 of 180 quantities pass** (6 known failure(s)) in 52 active cases: 43 theory, 9 published benchmark, 0 experiment; 9 pending cases wait for capabilities still being built.
 
 ## Theory: closed-form solutions, patch tests and mesh invariants
 
@@ -28,6 +28,10 @@ Generated by `cargo xtask oracle` from [`tests/oracle/`](../tests/oracle/); the
 | [cdt-stepped-block](../tests/oracle/cdt-stepped-block/) | volume of the tetrahedra | 47000 | 47000 | < 1e-7% | 1e-12 rel. | pass | matches |
 | [cdt-stepped-block](../tests/oracle/cdt-stepped-block/) | elements that fail the certified Jacobian check | 0 | 0 | ≈ 0 | exact | pass | matches |
 | [cdt-stepped-block](../tests/oracle/cdt-stepped-block/) | elements the Jacobian check could not decide | 0 | 0 | ≈ 0 | exact | pass | matches |
+| [filleted-bracket-fillet-stress](../tests/oracle/filleted-bracket-fillet-stress/) | largest nodal von Mises stress on the fillet face (MPa) | 213 | 213.31 | 0.144% | 3% | pass | matches |
+| [filleted-bracket-fillet-stress](../tests/oracle/filleted-bracket-fillet-stress/) | total reaction x (N) | -2000 | -2000 | < 1e-7% | 1e-9 rel. | pass | matches |
+| [filleted-bracket-fillet-stress-coarse](../tests/oracle/filleted-bracket-fillet-stress-coarse/) | largest nodal von Mises stress on the fillet face (MPa) | 213 | 213.31 | 0.144% | 3% | pass | matches |
+| [filleted-bracket-fillet-stress-coarse](../tests/oracle/filleted-bracket-fillet-stress-coarse/) | total reaction x (N) | -2000 | -2000 | < 1e-7% | 1e-9 rel. | pass | matches |
 | [free-beam-frequencies](../tests/oracle/free-beam-frequencies/) | sixth frequency (the last rigid-body mode) | 0 | ≈ 0 | ≈ 0 | ± 8.1264e-5 | pass | matches |
 | [free-beam-frequencies](../tests/oracle/free-beam-frequencies/) | first free–free bending frequency (mode 7) | 0.081264 | 0.080618 | -0.795% | 1.5% | pass | matches |
 | [free-beam-frequencies](../tests/oracle/free-beam-frequencies/) | total mass | 20 | 20 | < 1e-7% | 1e-12 rel. | pass | matches |
@@ -200,6 +204,8 @@ Generated by `cargo xtask oracle` from [`tests/oracle/`](../tests/oracle/); the
 - **[cantilever-tet10](../tests/oracle/cantilever-tet10/)** (theory): Cantilever under a tip load, Timoshenko deflection (tet10). Source: Timoshenko and Gere, Mechanics of Materials (beam with shear deformation: δ = PL³/3EI + PL/κGA, κ = 5/6 for a rectangle); Cowper, J. Appl. Mech. 33 (1966) 335–340 for the shear coefficient. Tolerances — tip_uz: beam theory vs 3D elasticity (a few tenths of a percent at L/h = 10); quadratic tetrahedra are converged on this mesh; reaction: equilibrium holds to rounding
 - **[cdt-cylinder](../tests/oracle/cdt-cylinder/)** (theory): Constrained Delaunay mesh of a cylinder: volume within the chordal bound, valid elements. Source: mesh invariants: an inscribed polygon of sagitta s loses at most 2s/R of a circle's area (elementary geometry); constrained Delaunay tetrahedralization after Diazzi et al., ACM TOG 42(6) 2023. Tolerances — volume: the tessellation inscribes the cylinder within the chordal tolerance s = 0.05: the polygon section loses between 0 and 2s/R = 0.5% of the area; the reference is the middle of that band; invalid: every element of a valid mesh has positive volume
 - **[cdt-stepped-block](../tests/oracle/cdt-stepped-block/)** (theory): Constrained Delaunay mesh of a stepped block: exact volume, valid elements. Source: mesh invariants: a tetrahedralization of a polyhedron fills its volume exactly (Si, TetGen paper ACM TOMS 41(2) 2015 for the definition of a CDT; Diazzi et al., ACM TOG 42(6) 2023); the volume is 60·40·10 + 40·40·10 + 20·40·10 − 10·10·10. Tolerances — volume: a planar boundary is tessellated exactly and the constrained Delaunay mesh fills it exactly: only rounding; invalid: every element of a valid mesh has positive volume; undetermined: a linear tetrahedron's sign is exact
+- **[filleted-bracket-fillet-stress](../tests/oracle/filleted-bracket-fillet-stress/)** (theory): Filleted L-bracket under a side load: the peak von Mises stress on the R6 fillet, fine tet10 mesh. Source: mesh convergence of the finite element solution (P. J. Roache, Verification and Validation in Computational Science and Engineering, Hermosa, 1998, ch. 5): the bracket has no closed-form stress; the reference is the mesh-independent peak of a four-level study of quadratic tetrahedral meshes refined by √2 in size and in curvature resolution (README.md); equilibrium. Tolerances — fillet_peak: the four-level study gives 213.3, 210.6, 214.3, 213.3 MPa (2k to 13.5k elements): the bending stress is converged across the fillet, and the peak nodal value moves only with which of the fillet's tessellation lines (fixed angles, through every level) carries the largest node, by under 2%; reaction: equilibrium holds to rounding
+- **[filleted-bracket-fillet-stress-coarse](../tests/oracle/filleted-bracket-fillet-stress-coarse/)** (theory): Filleted L-bracket under a side load: the peak von Mises stress on the R6 fillet, coarse tet10 mesh. Source: mesh convergence of the finite element solution (P. J. Roache, Verification and Validation in Computational Science and Engineering, Hermosa, 1998, ch. 5): the bracket has no closed-form stress; the reference is the mesh-independent peak of a four-level study of quadratic tetrahedral meshes refined by √2 in size and in curvature resolution (README.md); equilibrium. Tolerances — fillet_peak: the four-level study gives 213.3, 210.6, 214.3, 213.3 MPa (2k to 13.5k elements): the bending stress is converged across the fillet, and the peak nodal value moves only with which of the fillet's tessellation lines (fixed angles, through every level) carries the largest node, by under 2%; reaction: equilibrium holds to rounding
 - **[free-beam-frequencies](../tests/oracle/free-beam-frequencies/)** (theory): Natural frequencies of a free beam: rigid-body modes and the first bending mode. Source: Euler–Bernoulli free–free beam, β₁L = 4.7300; Timoshenko, Young and Weaver, Vibration Problems in Engineering, 4th ed., Wiley 1974, §5.3. Tolerances — rigid_6: a free body has six zero frequencies; numerical rigid-body frequencies below 10⁻³ of the first elastic one (eigenvalues below 10⁻⁶ of it) are rounding of the shifted solve; f7: Euler–Bernoulli neglects shear and rotary inertia, about 0.8% at L/h = 20 for the free–free mode; mass: the mass matrix integrates the density exactly
 - **[j2-bauschinger](../tests/oracle/j2-bauschinger/)** (theory): Bauschinger effect of linear kinematic hardening: tension, then back to zero strain. Source: J2 plasticity with Prager's linear kinematic hardening in uniaxial stress (W. Prager, Ing.-Arch. 1955; Simo and Hughes, Computational Inelasticity, Springer 1998, §2.3): from σ_a = σ_y + E_t (ε_a − σ_y/E) the material unloads elastically by 2σ_y and then hardens with E_t, so at zero strain σ = σ_a − 2σ_y − E_t (ε_a − 2σ_y/E). Tolerances — residual_stress: a homogeneous small-strain state the element represents exactly, with increments that end at the load path's turn; isotropic hardening would give −281.835 (it yields again only at −σ_a); plastic_strain: (σ_a − σ_y)/H forward plus E/(E + H) (ε_a − 2σ_y/E) in reverse
 - **[j2-heated-bar](../tests/oracle/j2-heated-bar/)** (theory): A steel bar held at its ends and heated past yield (small strain). Source: Uniaxial J2 plasticity with linear hardening (Simo and Hughes, Computational Inelasticity, Springer 1998, §2.3) with the additive thermal strain: the bar's total axial strain is held at zero, so its mechanical strain is −α ΔT and σ = −(σ_y + E_t (α ΔT − σ_y/E)) once α ΔT exceeds σ_y/E. Tolerances — sigma: a homogeneous uniaxial state the elements represent exactly; plastic_strain: (\|σ\| − σ_y)/H, as for the stress