explicit: opt-in mass scaling to a target increment, the added mass reported

An explicit step may ask for mass scaling to a target time increment (on
a set, or the whole model): elements whose stable increment is below it
get the density that reaches it, with their lumped masses, frequency
bound and hourglass scales; adiabatic heating keeps the physical
density. The run reports the elements scaled, the added mass in all and
per section with its fraction, a warning, and the added mass's kinetic
energy in the energy account. Verified on a uniform bar scaled to twice
its increment (added mass 3×, increment doubled, a quarter of the
kinetic energy left to the physical mass). ROADMAP and parity note the
hyperelastic materials and mass scaling.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo

ROADMAP.md

@@ -36,7 +36,7 @@ pressure) is a degree of freedom of the existing DOF framework, not a separate s
 | M7 Assemblies, contact and friction | Needs M15. Part instances from SolidCraft occurrences; tie between non-matching meshes (mortar); implicit contact: surface-to-surface mortar and node-to-surface, penalty and augmented Lagrange, self-contact, automatic pair detection (the model's contact definitions, `interaction.contact.*` with `find`, the deck mapping, `fieldcraft_fem::contact`'s closest-point projection and bucket grid, and the explicit solver's segmentation and friction return map are in place to reuse; the implicit solver refuses contact by name until then); friction: Coulomb with stick–slip, static/kinetic, anisotropic, pressure-, rate- and temperature-dependent coefficients; contact output (pressure, slip, status); thermal contact conductance and frictional heating; wear (Archard); bolt pretension, connectors with behaviour (elastic, damped, stops, locks); amplitudes, multiple steps, restart; nonlinear steps in all three decks. Verified by Hertz (sphere and cylinder), the Cattaneo–Mindlin partial-slip problem, the sliding block, NAFEMS contact benchmarks | planned |
 | M8 Materials, explicit, shells, composites | Plasticity, hyperelasticity, damage data per solver; explicit dynamics decks (Abaqus/Explicit, LS-DYNA); midsurface shells; composite layups and material orientations, continuum shells on swept hex; hybrid (mixed u–p) hex8/hex20/tet10 for nearly incompressible materials (done); heat transfer (solids done: steady and θ-method transient conduction with flux, convection and sources, thermal strain in static steps (solids and 2D) and explicit dynamics (with plasticity), coupled temperature–displacement, `solve.heat`; deck output, 2D/shell/beam conduction planned) | started |
 | M9 Post-processing and deck readers | Results readers for public formats (Nastran OP2, LS-DYNA d3plot, Abaqus `.fil`); XY and path plots, cuts, display groups, free-body forces; deck readers that keep unknown keywords; mesh convergence studies | planned |
-| M10 Explicit dynamics | Shared element and material kernels with the implicit solver (`fem`); central-difference solver with lumped mass, stable time step, one-point hex8 with hourglass control and nodal-pressure tet4, bulk viscosity, energy accounting (X1 core: done — `fieldcraft-explicit`, `explicit_dynamic` steps with initial velocities, prescribed motion and planar rigid walls, `solve.explicit`/`solve.history`, small-strain linear elastic; bar wave, rigid-wall impact, energy balance and cantilever-period tests); large-deformation materials (X2: done — updated Lagrangian elements, Jaumann/Hughes–Winget and Green–Naghdi/Flanagan–Taylor rates, J2 bilinear/table plasticity, Johnson–Cook strength with heating and damage, erosion; materials gain `plastic`, `damage`, `erosion` with `model.material.plasticity`/`damage`; Dienes shear, rigid rotation, J2 uniaxial and Taylor-bar tests); contact (X3: done — `interaction.contact.pair`/`general`/`find`, segment-to-segment penalty contact both ways with polygon clipping (passes the contact patch test on non-matching meshes), pairs, general (all exterior faces) and self contact, bucket-grid search, deterministic on any thread count, a penalty from the masses and the stable increment that never shortens it, Coulomb friction with exponential decay by a return map, friction on rigid walls, contact energy and friction dissipation in the balance, initial penetrations adjusted or refused; Abaqus `*CONTACT PAIR`/`*CONTACT`/`*FRICTION` and LS-DYNA automatic contacts in the decks; verified by colliding bars, sliding blocks, the patch test and Hertz's sphere impact); hyperelastic materials on the shared material point and mass scaling next; runs on hex and tet meshes | started |
+| M10 Explicit dynamics | Shared element and material kernels with the implicit solver (`fem`); central-difference solver with lumped mass, stable time step, one-point hex8 with hourglass control and nodal-pressure tet4, bulk viscosity, energy accounting (X1 core: done — `fieldcraft-explicit`, `explicit_dynamic` steps with initial velocities, prescribed motion and planar rigid walls, `solve.explicit`/`solve.history`, small-strain linear elastic; bar wave, rigid-wall impact, energy balance and cantilever-period tests); large-deformation materials (X2: done — updated Lagrangian elements, Jaumann/Hughes–Winget and Green–Naghdi/Flanagan–Taylor rates, J2 bilinear/table plasticity, Johnson–Cook strength with heating and damage, erosion; materials gain `plastic`, `damage`, `erosion` with `model.material.plasticity`/`damage`; Dienes shear, rigid rotation, J2 uniaxial and Taylor-bar tests); contact (X3: done — `interaction.contact.pair`/`general`/`find`, segment-to-segment penalty contact both ways with polygon clipping (passes the contact patch test on non-matching meshes), pairs, general (all exterior faces) and self contact, bucket-grid search, deterministic on any thread count, a penalty from the masses and the stable increment that never shortens it, Coulomb friction with exponential decay by a return map, friction on rigid walls, contact energy and friction dissipation in the balance, initial penetrations adjusted or refused; Abaqus `*CONTACT PAIR`/`*CONTACT`/`*FRICTION` and LS-DYNA automatic contacts in the decks; verified by colliding bars, sliding blocks, the patch test and Hertz's sphere impact); hyperelastic materials (neo-Hookean, Mooney–Rivlin, Yeoh) on the shared material point with average nodal pressure tets, and opt-in mass scaling with the added mass reported: done; runs on hex and tet meshes | started |
 | M11 Equations of state and shells | Polynomial, ideal-gas, Mie–Grüneisen, JWL with programmed burn, tabulated; energy coupling; shock verification (Rankine–Hugoniot, Sod, Noh, Sedov); Belytschko–Lin–Tsay shells with self-contact on quad meshes | planned |
 | M12 CFD: lattice Boltzmann | D3Q19/D3Q27 on grids voxelised from the face-tagged surface; TRT, regularised and cumulant collision; interpolated walls, inlets and outlets; LES (Smagorinsky, WALE) with wall models; thermal LBM and conjugate heat transfer with the structure's thermal solver; non-Newtonian viscosity (power-law, Carreau–Yasuda, Cross, Herschel–Bulkley, Bingham) and temperature-dependent viscosity; porous media (Brinkman, Darcy–Forchheimer); multiphase and free surface (M13); validation by the lid-driven cavity, backward-facing step, cylinder wake (Strouhal) and turbulent channel; octree refinement shared with the hex mesher; wgpu backend (deterministic per device, checked against the CPU) (CPU core: done — `fieldcraft-lbm` with D3Q19 TRT and Guo forcing, halfway bounce-back and moving walls, slip and periodic faces, Zou–He velocity and pressure faces, exact voxelisation of obstacle bodies, momentum-exchange forces per face; fluid materials, fluid domains and fluid steps in the model; `model.fluid_domain.*`, `solve.fluid`; verified by Poiseuille channel and pipe, Couette, Taylor–Green decay, sphere-array Stokes drag and mass conservation; Schäfer–Turek 2D-1 as a benchmark) | started |
 | M13 Fluid–structure interaction | Immersed-boundary coupling of the lattice Boltzmann fluid with the explicit or implicit structure; interface force transfer; sub-cycling; Aitken then interface quasi-Newton coupling; free-surface flow | planned |