The setup checklist card (#265), its show_setup view setting, the View
menu checkbox and the preferences file that only remembered it go; the
tree's marks and ghost rows replace them. Session::progress and
model.check's progress stay for agents. An old prefs.json is no longer
read.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Each top-level node that is a setup stage carries a mark at the right
of its row beside its count (done, next, blocked) with the reason and
place in its hover, and a node still lacking what its stage needs shows
a ghost row that starts the providing command. ui.inspect reports each
node's state as browser.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The form's OK on a mesher whose body already has a mesh opens a Replace
mesh prompt ("CrankArm already has a mesh (7,274 hex20). Replace it?"),
naming sets that list the old labels and results that will be cleared.
Replace runs the form; Cancel leaves it open. The control channel's
ui.dialog submit is the OK button, ui.prompt answers replace or cancel.
Programmatic calls never ask. Fixes#267.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.tet.generate and mesh.planar stacked a second mesh on a meshed body;
mesh.hex.*, mesh.hex.octree and mesh.cells wiped every body's mesh. All of
them, and mesh.mirror for its image bodies, now go through replace::clear:
the body's old elements and the nodes only they use go, other bodies stay.
The reply reports replaced {body, elements, nodes}, stale_sets (sets that
listed the old labels) and results_cleared; the command is one undo step.
replace::MESHERS names the bodies each mesher fills, and replacement()
says what a run would replace, for the app to ask first. mesh.block stays
additive: a body is built from several blocks. Refs #267.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Model::remove_body_mesh drops the elements that fill a body and the nodes no
other element uses, with their tags; Model::sets_using names the sets that
listed any of them by label. The base of per-body remeshing (#267).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The ~40 parameter checks give a ProblemKind instead of text; Session::execute looks the problem
up in the command's form (a group's missing field becomes that field's own path). Replies still
name keys; forms phrase the same problem by label. A test refuses every field of every form and
checks each refusal names a field of that form.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Problem::phrase serves both for_agents and for_form. A required name says "enter a name", a
path "enter a path", anything else "required" (no more "Autosave: enter an autosave"). New
kinds for what commands check (positive, range, list, name, path, invalid), and refine() to
look a command's problem up in its form.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every fit frames what is drawn (the deformed shape and the setup's symbols
included) with Camera::fit_in in the part of the viewport the overlays
leave free: the results legend, the selection bar, the gizmo and the
navigation bar (framing::free_part). Standard views fit too, so a long
beam's front view keeps both ends (#147); fit and home leave the legend
clear (#76). The view frames itself in the home view when another model,
sample or design is opened (Session::opened; the same design opened again
after an edit keeps the camera) (#233), and when results come up with part
of the model out of sight (#223). ui.inspect's layout reports the legend.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The first look at a solved static step draws the von Mises contours on the
true geometry; the deformed shape comes when asked for (Deformed,
results.deformed, results.animate), at the automatic scale. Frequency steps
still open on mode 1 deformed and explicit steps at true scale, as the
owner's notes in #77 ask; a 0.24 mm deflection drawn as 10 mm no longer
reads as a failed part.
Fixes#77
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The distance and the target follow from the eight corners' exact
projections, for orthographic and perspective cameras and any direction of
view, so a long beam seen side on fills the width instead of a sphere
around it the height (#147). The free part is given as fractions of the
view, so overlays can be left out (#76); a margin is kept on each side.
Camera::fit is fit_in over the whole of a square view, and the headless
renderer fits to the picture's aspect.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
It changes when file.open, file.recover or file.sample replaces the session
and when geometry.open opens another design file or starts a new model; an
edit, a solve or reopening the same design keep it. The desktop app frames
the view on that change (#233).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Zoomed in on the hex20 crank arm, the element edges and the shaded faces
did not meet (#260). The mesh is conforming; the display drew each hex20
face and edge as straight chords between corners while the mid-side
nodes lie on the curved surface (up to 0.44 mm off the chord at 3 mm),
and drew the geometry's face boundaries from the design tessellation,
off both.
Now a quadratic face is cut into triangles whose vertices are its
corners and mid-side nodes, each edge is drawn as its two halves, and
over the mesh the geometry's edges (and a hovered design edge) are drawn
as the element edges on geometry edges (`DisplayEdge::feature`), so
faces, edges, feature lines and the highlight share their vertices.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
`quality::conformity` checks a solid mesh for cracks: the free faces must
close up (every corner edge on exactly two), no two distinct nodes may
coincide, and every element edge has one mid-side node. The hex tests
assert it for every method, hex20 included, and the crank arm sample's
7274 hex20 is conforming (#260: the disjoint lines are a display issue).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.recovery.list gives each entry's age; File › Recover shows name, age and counts, newest
first, with Discard all. docs/formats/fieldcraft.md states the folder and pruning rules.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Runs driven by automation (use_automation_dir) and CI use fieldcraft-automation/recovery in the
temporary folder unless FIELDCRAFT_RECOVERY_DIR is set. Taking a slot deletes left-behind
entries older than 14 days and those whose model was saved since.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Once a model has geometry or a mesh, the browser shows the analysis stages from the engine's
checklist, each ticked, next, dashed (optional) or open; a click starts the stage's command and a
blocked stage's hover says what it waits for. The × hides it and View › Setup checklist shows it
again; the choice is kept in the per-user prefs.json.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The analysis stages in order (geometry, seeds & partitions, mesh, material, section, sets,
boundary conditions, loads, step, solve, results), each done, next, todo, blocked or optional,
with the command that does it. Built on the command requirements; Solve also reads the model
check's first error.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The column is measured from the form's labels, at most 45 % of the form's
width; a longer label wraps onto two lines (the column widens only when
two are not enough) and its required and help marks follow it inside the
column. Fixes labels cut at a fixed 112 pt ("Hardening modu…").
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A form row's label and its drawn (i) mark show the field's help and unit
on hover. With no unit system a number shows its dimension ("[stress]")
and the form says where to set the system (Properties › Units). Vector
components are captioned (X, Y, Z, or the field's own names such as E1).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Field gains `help`: one or two sentences of our own wording with a
typical value (yield stress: the initial yield, 276 MPa for 6061-T6,
250 MPa for mild steel; hardening modulus explained; and so on), set
next to each field in cmd/forms.rs. Dim::name gives the dimension
("stress"), Field::unit_label the unit or, with no unit system, the
dimension in brackets, and Field::help_text the tooltip with the unit or
where to set the unit system. The JSON Schema description carries the
help too. A test checks every form field has help and every dimensioned
field shows a unit or dimension in every system.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.tet.generate, mesh.hex.*, mesh.hex.blocks and mesh.cells give every
seed on the open design to their meshers, which match them to their own
curves by position, so a seed on an edge two cells share holds in both. The
tet reply gives, per seed, the mesh edges along it. Docs and the roadmap
say what is honoured where.
Fixes#230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The seed's spacing becomes size-field samples the field grades from, and
after coarsening its nodes are put on the feature curve and pinned, so the
edge has exactly the seeded divisions at the seeded spacing. The quality
report gives, per seed, the boundary edges along it.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A seed is matched to a mesher's curve by position (ends and middle within the
two tessellations' tolerance), which also orients its bias. Interval
assignment holds exact seeds, raises minimums and takes free seeds as goals;
an equality, loop minimum or parity it cannot meet with the exact seeds held
names them. Seeded curves get the seed's spacing. Extrude and revolve seed
cross-section curves and the layers of a level interval; sweep and mapped
seed their B-rep edges; cells seed the shared edge once, so both cells keep
it and stay conforming.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
schema::Problem now holds the &'static Field it is about and a ProblemKind
(Required, NotANumber, Below, Above, NotAChoice, UnknownVariant, ...).
Problem::for_form phrases it by the field's label, Problem::for_agents by
its JSON path, from the same data. The form no longer rewrites problem
text by string matching or re-walks the field tree; field_at moves to
schema.rs for the engine's own Param errors. The forms test matches
EngineError::Param { key, .. } directly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every problem reads with the field's label ("Material: choose a material")
beside its field, once it was edited or OK was tried; a click on the greyed
OK shows them all, and its tooltip lists them. A parameter the command
refuses shows beside its field, by its label, in the form and status bar.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A seed draws a tick at each node it puts on its edge, so a bias shows as ticks
crowding toward an end. The browser lists the seeds under Mesh; a click
selects the seeded edge. The Seed Edges form takes the selected edges with
Use selection. The toolbar entry is ready (its icon renamed with it).
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Seed design edges by their persistent names with a count or a size, a bias
and a constraint; one undo step each, saved with the model. Seeds on edges a
reopened design lacks are reported as stale.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A seed names a design edge and asks for a number of divisions or a target
length, optionally graded geometrically toward the start, the end or both
ends, kept exactly, as a minimum or as a free goal. Seeds are saved with the
model; Seed::spacing gives the node positions meshers and the viewport share.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The viewport keeps each drawn body's B-rep edges; with Select: Edges a click
picks the nearest visible one (before and after meshing), hover and the
selection draw it wide, and multi-select works as for faces.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A design edge is named by its faces' persistent names, sorted and joined by
`|`, numbered `~k` by position when several separate the same faces. The
names follow the faces through a design edit and a partition replay.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A reference field (a material, set, step…) with no items was a free-text box; it is now a greyed
drop-down ("No materials yet") with a button that opens the command making one (the
collection's requirement provider). That form comes back to this one on OK, with the new item
picked, or as it was on Cancel. A required reference with one candidate, or with the browser's
selection of its kind, starts picked when the form opens, so the fields and the JSON view agree.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The mesh tool runs mesh.cells (method cells) and mesh.mirror (method mirror).
The server instructions and docs/mcp.md list the partition, per-cell, mirror
and symmetry commands and point to the crank-mirror sample.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample crank-mirror partitions the crank arm on its symmetry plane, sweeps
one half all-hex (hex20) and mirrors it into one conforming mesh, then defines
the crank-arm model. Samples may now run preparing commands (datums,
partitions) before their script sees the bodies. Its test checks the halves
alike and joined, every element valid and the sets on both halves; the heavy
test solves it: sigma_xx at the root -62.43 / +62.43 MPa against M/Z = 62.5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Commands run from the UI whose reply had no `summary` printed their raw
JSON into the status bar (Check Model, Step Table, Model Info, Bodies,
Find Contacts, the solve steps...). The status bar now gets one sentence
for every reply, and a reply with more to it opens in the context panel:
Check Model as its diagnostics with severity marks and a button to each
fix, the Step Table as a grid of loads and BCs against steps, any other
reply as labelled rows and tables. Check Model and the Step Table follow
the model as it changes. Programmatic replies stay JSON.
Fixes#217
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A symmetry condition (zero normal displacement, zero rotation about the
in-plane axes) on a datum plane normal to X, Y or Z, with its set given or made
of the open design's faces on the plane (a partition's cut faces), so half a
symmetric part is solved as a half. Half a 40 mm bar cut at its mid-width, with
the condition and half the load, bends as the whole bar to 2e-12 with half the
reaction. Inclined planes are refused as not supported yet.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The bodies' elements are reflected across a datum plane (or a point and
normal) with fieldcraft_mesh::mirror and joined on it. The image is tagged as
the design's body at the reflected place (found by volume and centroid, or
named in `as`), its faces with that body's faces under them, so sets by face
name reach both halves. Half a bar meshed hex8 or hex20 and mirrored has the
whole bar's node and element counts and volume, and its bending deflection to
1e-12; tet4 and tet10 mirror valid and conforming.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
fieldcraft_mesh::mirror reflects a region's tet4, tet10, wedge6, hex8 and hex20
elements across a plane. The copies list their nodes in reflected order (corners
swapped, mid-side nodes following their edges), so every copy is right-handed;
reflected_faces and reflected_edges give the copy's face and edge over the same
nodes. Copies of the nodes on the plane are merged with the originals through
join::merge_coincident, so the region and its image form one conforming mesh.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Retina window 2300 pixels wide drew its CPU viewport (the offscreen capture's
path) into a 2300 x 1412 texture, past egui's 2048 limit, and the app aborted.
The image is now scaled to fit the context's max_texture_side and drawn
stretched, as an image over the renderer's own limit already was. Fixes#237.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
