Deleting, suppressing or editing a partition (or its datum), or cutting a
meshed body, removes the meshes of the bodies that are gone, reported as
replaced, in the same undo step. model.check lists meshes of partition
cells the open design no longer has (a model saved before the cut
changed), and mesh.clear removes them, or the meshes of named bodies.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The file is no longer committed: dependency pull requests from forks failed CI only because
it was out of date. The Dependabot workflow that regenerated it is gone. licences now fails
when a shipped crate names no licence and carries no licence file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Window captures (light theme, 1400 x 860) of every sample solved on the current UI; the
thumbnails that were viewport crops are now clean ui.render images like the others; the drop
test's figure at 0.1 ms reads 129 MPa.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.export.csv runs solve.probe or results.reactions and writes their reply as an RFC 4180
CSV: a row per node (node, x, y, z and the quantities the step has, columns it does not have
left out) or per set with the total and the applied load; numbers in shortest round-trip form,
so they read back bit for bit. A stale result is refused. The results panel has Export CSV…
beside Reaction sums and under the probed node: the save picker, or the form without one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.contour takes range {min?, max?} (or "auto"), kept until the field changes: a
singular peak no longer squeezes the field into the bottom bands. Values above a clamped
maximum go to an extra band drawn in the over colour, split exactly at the clamp; the legend
shows that band up to the true maximum and says it is clamped. The results panel has Legend
max/min (Auto or a value), the MCP show_results tool a range argument, and headless pictures
follow the clamp too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
diagnostics.crash_reports.delete deletes one report or all. The window lists each report
(when, what, how many times) with Report…, Copy Path and Delete, and Delete All; ui.prompt
answers it over the control channel.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The README video's model as a sample: the corpus cantilever-i-beam design opened as geometry,
swept all-hex, clamped at F2:start, 1 kN on F2:top through a kinematic coupling; static step
Load. It has a Start-card thumbnail and a gallery capture; a test checks its tip deflection
against beam theory with shear.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.new replaces the session with an empty one: no design, mesh, definitions, results or
journal, nothing to save, the undo history empty. The File menu and Cmd/Ctrl+N run it, asking
first over unsaved changes. A sample name the app does not know (a typo, an old ?sample= link)
opens the samples to choose from, and the status names it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
One formatter (four significant digits, thousands separators, round-off as
0) and the model's units through every results readout:
- legend title with its unit, a mode shape normalised; Max/Min with units,
clickable to show and probe the node; markers at both in the viewport
(#321, #330)
- the deformation scale field shows the scale Deformed would use, never 0,
in the shared format; true scale named (#325, #326)
- setup symbols off over results by default (Show › Loads & BCs), and then
only the shown step's (#327)
- reaction sums in the results panel however they are run: per set and in
all, force and moment with units, applied beside reacted (#328)
- the probe: U [mm], |U|, Mises, stresses and principals with units, the
label kept inside the viewport, rows in the results panel (#329)
- hiding the mesh over a plot hides the element edges, not the contours
(#317); a hidden body's contours go with it, the range follows what is
shown (#365)
- the solve summary: peaks with units, n/a rows left out, counts grouped,
internals under Details (#321, #319)
- the energies plot: axes with units, a cursor at the frame (click or drag
to move it), hover to read (#331)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- geometry.bodies lists each body's vertices; geometry.datum.point by
vertex takes the design's vertex names (labelled Vertex, not Mesh
vertex) (#346).
- geometry.centre: the point for what is picked: a vertex, nodes, a
hole's centre (cylindrical faces or circular edges), else a centroid
(#351).
- mesh.cells' form: the cells first, and a method drop-down per cell
(schema kind RefChoices) instead of JSON (#344).
- interaction.rigid_wall(.delete): rigid walls of an explicit step from
the Interactions tab, no longer coming soon (#350).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- A solve or a mesher runs as a job with one progress mechanism: the overlay
shows the step, stage, count and elapsed time with a bar when bounded, OK
waits while it runs, and the status sums it up (elements, smallest angle,
time) (#322, #357).
- Over the control channel such a command is a job too: answered when it
ends however long it runs, or at once with wait: false, then job.status,
job.wait, job.cancel; ui.inspect gives job; MCP waits for it (#367).
- A command that cannot run yet lists what it misses in the context panel,
each with a button to the command that provides it (#323).
- A cancelled or refused solve stays in its workspace (#324, test).
- A mesher form starts from the parameters of the mesh it would replace (#343).
- Seed Edges and edge/vertex/face datum points switch the selection filter
while open and restore it (#341).
- Datum forms draw the datum live, the Partition form shows its datum, and
new datums and partitions get the next free name (#347).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Delaunay refinement split a boundary face edge at its midpoint even when that
midpoint lay inside the diametral sphere of a feature edge beside it. Each such
split halves the face vertices' distance to the curve, so they piled up against
it (the heated bracket grew face vertices 0.016 mm from a 4 mm-sized edge), the
improvement schedule could not lift the tetrahedra there to its target, and
inserted vertex after vertex around them: 29257 elements and about two minutes
to open instead of 23641 and 6 s. The SolidCraft pin move (4c91f9b) added one
interior vertex to the bracket's end faces, which changed the CDT enough to
expose it.
Following Shewchuk (1998), an encroaching midpoint now splits the encroached
feature edge instead.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
examples.md and mcp.md tell the one-datum workflow and its numbers; the
crank gallery captures and Start card thumbnails are taken again on this
build; ROADMAP marks the automatic blocks of extruded cross-sections done,
and features.md's Decompose entry says what is left (3D parts).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The release job signs SHA256SUMS.txt into SHA256SUMS.txt.minisig with rsign2 when the
FIELDCRAFT_SIGNING_KEY secret exists, and checks the signature against the public key the app
is built with; without the secret the draft is unsigned, the run warns and the notes say the
app cannot install that release itself. docs/releasing.md says how the key is set up, kept
and rotated; docs/updates.md describes checking, verifying and installing, the web app's
Reload to update, and FIELDCRAFT_UPDATE_HOST for tests. privacy.md, control-protocol.md,
web.md and the roadmap say what changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The same check as the app's Help › Check for Updates and fieldcraft-cli update --check: the
latest release, whether it is newer, its page, whether it is signed and the asset this install
would download. It only reports. Checking reaches the network, so only the desktop app and the
CLI switch it on; tests, scratch sessions and the browser build refuse without asking.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A region of an extrusion's (or revolution's) cross-section that no
structured scheme fits is now cut by straight lines into blocks that fit,
before interval assignment, so the cuts are curves of the arrangement and
their counts are assigned with the rest; nothing reaches the model
(hex::decompose, after Tam and Armstrong's medial-axis subdivision and Li,
Armstrong and McKeag's primitives).
Per region: several holes are separated by lines across the gaps between
neighbouring holes; a piece with one hole gets the O-grid layout whose
pieces score best (lines from the outer corners towards the hole or along
their bisectors, from the hole's corners, or along four directions from
the hole); pieces without holes are cut by a two-ply search over lines
from concave corners and fillets and from convex corners. Candidates are
scored by meshing the pieces with their schemes (smallest corner scaled
Jacobian). A region's blocks are kept when fair (at least 0.5) or no worse
than its free mesh, and cuts never end inside a seeded curve.
This replaces the cuts from reflex corners along an edge. Tests on an L,
a T, a plate with a hole, with a slot and with three holes, and the half
crank's cross-section: every region structured, the quads conforming and
the smallest corner scaled Jacobian bounded. The half crank arm now
extrudes in 12 structured regions with a hex20 minimum scaled Jacobian of
0.37 (the arm meeting the bosses 20 degrees off tangent bounds it) where
it had 2 free regions and 0.009.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The first run asks whether to share anonymous usage (only when the host
says this run may), the answer and a random install id are kept in the
preferences, and Help › Settings… changes it. Commands are counted by
where they came from (ui, palette, script; mcp when the MCP server says
so), and cancelled forms and clicks on commands that cannot run yet are
recorded. The preferences go through a PrefsStore (a file, or the
browser's storage). Control channel: ui.settings, ui.prompt answers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
All six docs/media/examples images at 1400 x 860 in the light theme, the
solved sample in the home view (the crank mirror from below, as its text
says), with the wireframe symbols, no SETUP card and the crank's planes
hidden; the Start card thumbnails cropped to the model from them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
docs/crash-reports.md: what is kept where, what a bug report carries
(and only when ticked), the CLI and commands for agents; README's
privacy note; the control protocol's new prompt answers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crash: a panic hook and a locked per-run command journal (adapted from
SolidCraft's crash reports). A panic in a command becomes a report with
the model from before it and the command; one outside commands, or an
unclean exit found at the next start (abort, segfault, a crash in a
graphics driver, a kill: what #248 needs), a report with the model the
journal starts from (autosave, file or a copy) and the commands since,
the last control request and the dead run's log lines. Reports are
bounded, deduplicated by signature and replayable (crash::replay, with
writes confined to a scratch folder). The crash folder follows the
automation temp area in --control and CI runs.
logfile: a small size-rotated file logger behind the log facade.
bug_report: GitHub bug-form drafts. Version, OS and what happened by
default, home folder shown as ~; the command journal only with Share my
session, the model only with Include the model as well; a session too
long for the link becomes a file to attach and the clipboard text.
Commands: diagnostics.crash_reports, diagnostics.crash_report,
diagnostics.bug_report (Tools › Help, with its icon) and
diagnostics.crash_test (FIELDCRAFT_CRASH_TEST=1 only).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Right-click on any browser item (body, surface, datum, partition, set,
material, section, step, boundary condition, load, reference point,
coupling, contact, fluid domain) opens its menu: Edit…, Hide/Show,
Isolate, Show All, Active in step (boundary conditions and loads) and
Delete…. A right click on a datum or a partition's cut face in the
viewport opens the same menu. Each item the viewport draws on its own
has an eye; hidden items are neither drawn nor picked. Datums and
partitions are selectable with properties. Delete… and the Delete key
ask first (the prompt lists what uses the item: a datum's partitions
are deleted with it, other definitions in use are refused); ui.prompt
answers it. Every entry runs the same command as the ribbon and forms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
view.hide, view.show, view.isolate and view.show_all change which
bodies, surfaces, datums, boundary conditions, loads, reference points
and couplings the viewport draws. The hidden items are view state: the
manifest's `view` keeps them, a change marks the model unsaved, but it
is neither journalled nor undone and leaves results current. Items that
go away are forgotten. Headless pictures leave hidden items out; the
glyph builders take a filter. Tools > View > Show All claims the
commands.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A datum point by coordinates, at a mesh vertex, a fraction along a
design edge, at a face's centre, or where a datum axis crosses a datum
plane. Datum planes take three datum points or a normal to a datum axis;
axes take two datum points. geometry.datum.edit, .axis.edit and
.point.edit redefine a datum of their kind (partitions cut again);
geometry.datum.delete with cascade also deletes the partitions that cut
by it. The ribbon shows Datum Plane, Datum Axis, Datum Point and
Partition, each with its own icon; edit and delete leave the ribbon
(still commands, claimed by their entries).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crank-arm (and crank-mirror, kept as the same model under the name of
its mirror workflow) now cut the crank on its symmetry plane and the
half into seven cells: across the arm at x = 30, 60, 110 and 148, and on
two diagonals radial to the pocket's corner fillets. Every cell's
cross-section maps (four-sided blocks, the half O-grids round the bores,
triangle primitives at the pocket's corners); exact edge seeds give each
cut the same divisions on both sides, so mesh.cells merges all six cuts
and mesh.mirror reflects the half: 7 710 hex20, scaled Jacobian min 0.37
(was 0.17, and 0.009 for the swept mirrored half), edge ratio at most
7.0. Root σxx ±62.43 MPa against M/Z 62.6 MPa, the spindle carries the
1500 N. The test asserts the quality floor. Gallery images regenerated.
Fixes#247
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A cross-section region with three corners (a fillet's quarter disk, a
pocket corner cut off by a partition) was left to the free all-quad
mesher. It now gets midpoint subdivision's triangle primitive (Tam and
Armstrong 1991; Li, Armstrong, McKeag 1997): lines from a centre to a
node on each side split it into three mapped blocks, the interior then
smoothed and every quadrilateral checked (a fold falls back to free).
Interval assignment gains dominance constraints (a side shorter than
the other two together) so the split always exists.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Boundary condition, load and interaction symbols are wireframes (thin lines,
no shaded cones), so they never hide the mesh or a contour plot:
- a crossed wire triangle per constrained translation, tip on the node,
coming from outside the part where the set's faces say which side that is;
a held rotation adds a smaller triangle behind it (the double mark); fixed
shows all three axes, a symmetry plane only its normal;
- forces as open-headed arrows ending on the node, as long as four support
units at one place and 2.5 over a set, so loads and supports stay in
proportion (#78); moments as an axis line and a right-handed curved arrow
(#79); contact and tie surfaces as small squares on their faces;
- a constant size on screen at any zoom (#80): the symbol unit is the size
setting (View > Symbol size, `ui.set {symbol_size}`, 14 pt by default)
times the model length a pixel spans, rounded to a quarter of a doubling;
- spread evenly on a grid a few symbol units across, so their density follows
the screen, never more than 400 per definition;
- a layer of their own on the desktop (GPU and CPU): zooming rebuilds and
uploads the symbols only, never the mesh's scene; framing leaves them out;
- colour per kind from the theme's tokens (a new contact colour), and the
definition selected in the browser drawn in the selection colour, wider;
- depth-tested against the model with the line bias that keeps them on their
own surface; a load at a reference point or a single node and a reference
point's cross are drawn over the part (#78).
Headless pictures (MCP screenshot, `ui.render`) frame the camera first and
draw the symbols at the default size for it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An orbit turns about the model point under the press (the pick ray's
first hit on the plot, the mesh or the design), or the centre of what is
drawn when it starts on empty space, keeps that point still on screen and
marks it while orbiting. The wheel and a pinch zoom toward the point
under the cursor; the wheel's delta is read as it arrives, so a notch
zooms in full in orthographic and perspective views alike (#273).
Mouse presets and reverse zoom come from SolidCraft (prefs.rs NavPreset,
NAV_PRESETS; MIT OR Apache-2.0): FieldCraft's own (left drag per the
navigation bar) stays the default, Ctrl + left drag from empty space
orbits in every preset. They are chosen in the display menu, settable
with ui.set and kept in prefs.json beside recent.json (the browser build
keeps them for the page's run); an older prefs.json still loads.
Fixes#262, fixes#273.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Each top-level node that is a setup stage carries a mark at the right
of its row beside its count (done, next, blocked) with the reason and
place in its hover, and a node still lacking what its stage needs shows
a ghost row that starts the providing command. ui.inspect reports each
node's state as browser.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Preetinder Kalsi