* Structured hex meshing: multi-level extrude and revolve, one-to-one sweep, mapped blocks (M5)
modelcraft_mesh::hex::hex_mesh meshes a face-tagged boundary surface with
hexahedra by the first structured method that fits: a straight or
rotational multi-level sweep (imprinted cross-section arrangement, cuts at
reflex corners, mapped/annulus/free regions), a one-to-one sweep through
rings of linking faces (least-squares affine layers with residual
correction), or a mapped logical cube (trivariate transfinite
interpolation). Interval assignment couples shared curves; boundary quads
carry B-rep face tags; the certified validity gate, a tiling check and a
fidelity check guard the output; hex20 mid-edge nodes go onto the faces.
Shape::face_surfaces exposes the analytic face surfaces; the corpus runner
gets a structured hex column.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh.hex.generate: structured hex meshing as a command
Meshes one body, every body of the open design or an imported surface,
replaces the mesh, tags element faces with the B-rep faces (so sets by
geometry resolve) and reports per body the method, counts and quality.
The quality pass certifies each element once and feeds the validity gate
(quality::validity_gate_checks). Shape::size gives the cached body size
for defaults instead of a full measure.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: disk O-grids, convex interval cost, early size guard, hex20 corpus column
Smooth single-loop sections (cylinders, tori, vases) get a butterfly O-grid
instead of the free mesher; interval assignment raises counts by the
squared relative error so equal sides share increments evenly; a mesh far
beyond the element limit is refused before any work and mapped limits are
no longer swallowed. The corpus reports hex8 and hex20 quality.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Catalogue: structured hex commands ready (mesh.hex.sweep, mesh.hex.mapped, mesh.hex.generate)
mesh.hex.sweep and mesh.hex.mapped run mesh.hex.generate with the sweeping
methods or the mapped one; mesh.hex.generate is the sweep entry's related
command. The planned M6 octree entry moves to mesh.hex.octree (its icon
renamed with it). docs/features.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Docs: structured hex literature (B8), architecture, roadmap, parity; corpus hex column
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: simplify review fixes
Prepare each sweep frame's cross-section once (arrangement, cuts, fill)
and reuse it across refinement retries; candidate frames come from one
setup pass. Edge triangles come from the feature edges, layer counts go
through size::edge_divisions, sweep residual weights are computed once
per node, flux shape functions live on the stack, and the arrangement's
exact side test and distances serve the region probe. The engine takes
the boundary options mesh.tet.generate takes and names unnamed faces by
index like it; the corpus hex20 run reuses the winning method; the
mapped entry lists mesh.hex.generate too; the octree icon is redrawn
under its new id.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Survey of ~40 papers for meshing curved B-rep faces for shells: frontal-Delaunay point placement in
the cross-field metric (Remacle et al. 2013), recombination to all-quad, cleanup (Reberol et al.
2021), global parity by minimum T-join, verification on shell benchmarks; licences of every code
base. Also fixes the Lee & Lo 1994 author initials in literature.md B7.2.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* mesh: boundary surface preparation (weld, manifold and orientation checks, exact self-intersection, feature edges)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.surface.check on an open design's body or an imported surface
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: struct-init the test session
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: weld at an absolute distance too; the engine welds CAD tessellations at twice SolidCraft's linear tolerance
Faces of a SolidCraft tessellation carry their own copies of shared boundary points, which agree
only to within the kernel's tolerance (up to ~2e-6 mm on the test corpus).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: surface preparation in the literature survey, architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: simplify after review
- The weld distance travels with the mesh (SurfaceMesh::weld_distance, set by Shape::tessellate),
so every consumer welds a tessellation correctly without opting in.
- Exact tests are infallible on predicates::orient2d_projected (shared with generic_orient2d), and
compute each vertex's plane side once per pair with an early reject.
- One Box3 for the weld, the BVH and shells; a Half struct for edges; the weld's two lookups share
one loop, with chained grid cells; cached normals for feature edges; shared parameter helpers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* corpus: boundary surface preparation as a corpus stage
20 of 21 parts are valid boundaries with their expected genus; cross-cylinders' tessellation has
cracks and flipped triangles where its two intersection curves meet.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* mesh: element quality metrics and a certified Jacobian validity check
Bernstein-form Jacobian determinants for tet4/tet10/wedge6/hex8/hex20, certified
by bounds and subdivision (Johnen-Remacle-Geuzaine 2013); Shewchuk 2002 tet
metrics, Knupp 2001 hex/wedge/quad metrics; quality report and the validity
gate meshers run on their output.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.quality command; model documents its node order
mesh.quality reports certified validity, volume and per-metric statistics with
fixed-range histograms. The model's ElementKind doc states the Abaqus/VTK node
order and that deck code reorders formats like Nastran CHEXA20.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* quality: simplify after review; exact orient3d for tet4; gate on raw mesher arrays
- tet4 validity from the exact orient3d of the input coordinates
- validity_gate_elements takes (label, kind, coordinates) straight from a mesher
- one Jacobian per solid; certify caches piece bounds; product weights precomputed
- model::check_coordinates shared by set_node and quality; ElementKind is Ord
- engine: shared labels() parameter parser
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Survey of about 75 papers on robust predicates, Delaunay tetrahedralization, boundary
recovery, quality improvement and hexahedral meshing, with verified DOIs and the
licence of every associated code base. Architecture and roadmap now name the chosen
methods (robust CDT after Diazzi et al. 2023; octree-dual all-hex first). ADR 0001
adds the licence findings and the test-geometry rule.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
