A five-node pyramid, the conforming transition between a hexahedron's face
and tetrahedra: Bedrosian's rational shape functions with a collapsed (Duffy)
Gauss rule, a certified Jacobian on the base square with exact volume, a
scaled Jacobian, C3D5 / CPYRAM / LS-DYNA degenerate solid, VTK_PYRAMID and
the binary mesh code 13. A distorted hex8-pyramid5-tet4 transition mesh
passes the patch test and uniaxial tension exactly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A face merge may keep one of its faces' names (Merge::into, model
FaceMerge::into): absorbing a tiny face leaves the neighbour by its own
name, so sets on it still select it. Shape::absorbing_neighbour finds
the face a tiny one shares the longest edges with. geometry.face.absorb
absorbs one face (into a named or the best neighbour) or, from_check,
every small and sliver face the last geometry.check marked; check marks
now carry the small face they found.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.faces.merge {name, faces} records a face merge in the model;
it is applied after the partitions whenever the design is opened or cut
again, undoes through the journal and is saved with the model. Meshers,
mesh.plan (features and rings see merge:<name>; a merged face is
prismatic when its B-rep faces are), checks and the viewport see one
face, drawn in the warm colour. geometry.faces.merge.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
engine::view::build (Style, Show, Palette) is the viewport's builder,
moved from ui-egui; ui-egui maps theme::Tokens onto a Palette and calls
it. Palette::LIGHT now equals the light theme's tokens. Test: the app's
scene and engine::view::frame's are identical for the same session.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.check keeps its findings on the session (not an edit: not journalled,
saved or undone) while the checked design stays open; the picture and the app's
viewport draw the faces of small, sliver and near faces in the marker colour,
short edges as thick lines and a dot at each finding over everything. `mark:
false` or a clean check clears them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
--section x|y|z[=VALUE] hides the elements on the camera's side of a plane
(at the mesh's middle by default) so the element faces inside show;
--field contours a nodal field of the solved step (results.contour). The
MCP server's headless screenshot draws with the viewport's pipeline on the
shared device and its reply, like snapshot's, names the renderer.
Refs #422
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
fieldcraft-cli snapshot script.json --out shot.png [--view] [--size WxH]
draws the engine's framed scene (engine::view::frame, shared with the CPU
render_png) with the viewport's GPU pipelines offscreen: hardware GPU, then
a software one, then the CPU rasterizer (FIELDCRAFT_GPU=auto|hardware|
software|cpu). CI installs lavapipe so the GPU path runs there.
Refs #422
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.contour takes range {min?, max?} (or "auto"), kept until the field changes: a
singular peak no longer squeezes the field into the bottom bands. Values above a clamped
maximum go to an extra band drawn in the over colour, split exactly at the clamp; the legend
shows that band up to the true maximum and says it is clamped. The results panel has Legend
max/min (Auto or a value), the MCP show_results tool a range argument, and headless pictures
follow the clamp too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- DisplayMesh::from_model_hiding leaves out a hidden body's elements (and the
nodes only they use); Session::hidden_elements names them, so the viewport,
probing and headless pictures skip hidden bodies (#365).
- A solve summary's applied and reaction totals set the round-off of
cancelling sums to 0 (#319).
- results::principal for the probe's principal stresses (#329).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- Quantity names the unit of every number the results show from the model's
unit system (mm, MPa, N, N·mm, mJ, mW, °C or K); Field::title puts it in the
legend title, and calls a mode shape normalised (#321).
- A solved step's result stays current through edits that leave what it reads
alone (Model::step_inputs: other steps and what only they use), and comes
back current on undo (#318).
- Session::step_glyphs: the symbols of what a solved step used, for drawing
over its results; no load arrows on a frequency step's modes (#327).
- Nonlinear static steps open deformed at true scale like explicit ones, and
their automatic scale is 1 (auto_scale, shared by the viewport and the
headless pictures) (#326).
- results.reactions with an empty sets list sums the step's boundary-condition
sets, as its form says (#328).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A datum plane is drawn as the model's extent within it (where it cuts the
model's box, in the plane's axes) plus a 5 % margin, a datum axis along the
model's extent plus the margin, instead of squares 1.2 diagonals wide.
Fit, Home, the standard views and headless pictures frame the model
without the datums (they stay inside the clipping radius). The datum
selected in the browser is drawn highlighted and on top, even when hidden.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Right-click on any browser item (body, surface, datum, partition, set,
material, section, step, boundary condition, load, reference point,
coupling, contact, fluid domain) opens its menu: Edit…, Hide/Show,
Isolate, Show All, Active in step (boundary conditions and loads) and
Delete…. A right click on a datum or a partition's cut face in the
viewport opens the same menu. Each item the viewport draws on its own
has an eye; hidden items are neither drawn nor picked. Datums and
partitions are selectable with properties. Delete… and the Delete key
ask first (the prompt lists what uses the item: a datum's partitions
are deleted with it, other definitions in use are refused); ui.prompt
answers it. Every entry runs the same command as the ribbon and forms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
view.hide, view.show, view.isolate and view.show_all change which
bodies, surfaces, datums, boundary conditions, loads, reference points
and couplings the viewport draws. The hidden items are view state: the
manifest's `view` keeps them, a change marks the model unsaved, but it
is neither journalled nor undone and leaves results current. Items that
go away are forgotten. Headless pictures leave hidden items out; the
glyph builders take a filter. Tools > View > Show All claims the
commands.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Boundary condition, load and interaction symbols are wireframes (thin lines,
no shaded cones), so they never hide the mesh or a contour plot:
- a crossed wire triangle per constrained translation, tip on the node,
coming from outside the part where the set's faces say which side that is;
a held rotation adds a smaller triangle behind it (the double mark); fixed
shows all three axes, a symmetry plane only its normal;
- forces as open-headed arrows ending on the node, as long as four support
units at one place and 2.5 over a set, so loads and supports stay in
proportion (#78); moments as an axis line and a right-handed curved arrow
(#79); contact and tie surfaces as small squares on their faces;
- a constant size on screen at any zoom (#80): the symbol unit is the size
setting (View > Symbol size, `ui.set {symbol_size}`, 14 pt by default)
times the model length a pixel spans, rounded to a quarter of a doubling;
- spread evenly on a grid a few symbol units across, so their density follows
the screen, never more than 400 per definition;
- a layer of their own on the desktop (GPU and CPU): zooming rebuilds and
uploads the symbols only, never the mesh's scene; framing leaves them out;
- colour per kind from the theme's tokens (a new contact colour), and the
definition selected in the browser drawn in the selection colour, wider;
- depth-tested against the model with the line bias that keeps them on their
own surface; a load at a reference point or a single node and a reference
point's cross are drawn over the part (#78).
Headless pictures (MCP screenshot, `ui.render`) frame the camera first and
draw the symbols at the default size for it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The first look at a solved static step draws the von Mises contours on the
true geometry; the deformed shape comes when asked for (Deformed,
results.deformed, results.animate), at the automatic scale. Frequency steps
still open on mode 1 deformed and explicit steps at true scale, as the
owner's notes in #77 ask; a 0.24 mm deflection drawn as 10 mm no longer
reads as a failed part.
Fixes#77
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The distance and the target follow from the eight corners' exact
projections, for orthographic and perspective cameras and any direction of
view, so a long beam seen side on fills the width instead of a sphere
around it the height (#147). The free part is given as fractions of the
view, so overlays can be left out (#76); a margin is kept on each side.
Camera::fit is fit_in over the whole of a square view, and the headless
renderer fits to the picture's aspect.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Zoomed in on the hex20 crank arm, the element edges and the shaded faces
did not meet (#260). The mesh is conforming; the display drew each hex20
face and edge as straight chords between corners while the mid-side
nodes lie on the curved surface (up to 0.44 mm off the chord at 3 mm),
and drew the geometry's face boundaries from the design tessellation,
off both.
Now a quadratic face is cut into triangles whose vertices are its
corners and mid-side nodes, each edge is drawn as its two halves, and
over the mesh the geometry's edges (and a hovered design edge) are drawn
as the element edges on geometry edges (`DisplayEdge::feature`), so
faces, edges, feature lines and the highlight share their vertices.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Datum planes draw as a hatched square around the model, axes as a line through
it, each with its name, in the desktop viewport and the headless render. The
browser's Geometry node lists the datums and the partitions with the datum
each cuts by.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Geometry triangles remember their surface (body); the viewport and the
headless pictures draw each body of a multi-body design, such as the
cells of a partitioned part, in its own colour from the theme (eight in
turn), and a single body in the geometry colour as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
view::scene draws the boundary conditions, loads and interactions as the
viewport does (muted over a results plot) and frames them; Shown.sampled and
the MCP picture info's sampled_symbols list definitions drawn with a sample.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
`ui.view` and the MCP `screenshot` tool only turned to the named views, so
a picture sequence could only cut between them. `Orientation` (render) is a
camera orientation in degrees, {yaw, pitch, distance?}, checked as hostile
input: angles finite, distance finite and above 0, yaw wrapped, pitch
clamped to ±90, distance to 0.001–1e9. `modelcraft_engine::view::orientation`
parses it from JSON for both callers:
- control channel `ui.camera {yaw, pitch, distance?}` turns the app's camera;
- MCP `screenshot {camera}` turns it first (bridged through `ui.camera`,
headless in the CPU render, framed unless a distance is given). `view` and
`camera` are not given together.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
