arc-shallow-arch: a sinusoidal arch of 40 × 2 × 1 hex20 under a sinusoidal dead load scaled to
the one-mode closed form's upper limit load: the upper limit point at 0.992 (−0.8 %), the lower
at 0.219 (0.8 % of the peak load) and exactly one negative eigenvalue between them. ROADMAP and
parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
buckle-euler-pinned and buckle-euler-cantilever (hex20 columns, −0.18 % from Euler with
Engesser's shear correction) and buckle-plate-square (a simply supported square plate, b/t =
100, −0.39 % from k = 4; the support and thickness choices in its README). ROADMAP and parity
updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Segment-to-segment penalty contact between element faces: each secondary
face and each main face facing it are projected onto the secondary face's
plane, split into triangles, clipped (Sutherland–Hodgman) and integrated
with a three-point rule per sub-triangle (Puso–Laursen segmentation, the
penalty at the integration points as Fischer–Wriggers), so a uniform
pressure gives the consistent nodal forces on both meshes and the contact
patch test passes on non-matching meshes. Every contact runs both ways at
half the penalty: pairs with each surface as the secondary, general and
self contact face against face. A bucket grid of face boxes every
increment, faces integrated in parallel and their forces added in face
order: the same numbers on any thread count.
The penalty per area ε = s γ min(m/A)/Δt² comes from the lumped masses,
each node's directional area and the stable increment, bounded by
Gershgorin's row sums so contact never shortens the increment. Coulomb
friction with exponential decay by a regularised return map at the
secondary nodes; rigid walls take Coulomb impulses. Contact work and
friction dissipation join the energy balance; each contact reports its
peak force, first and last contact, deepest penetration, friction and the
nodes adjusted at the start (initial penetrations adjusted strain-free or
refused with the node, face and depth); a cap on contact faces.
Verified (crates/explicit/tests/contact.rs, tests/oracle/explicit-*):
colliding bars (2L/c +1.2%, ρcAv₀/2, KE kept to 0.005%, contact energy
back to 8e-5 of it), blocks sliding to a stop on a rigid wall and on a
plate under constant and decaying friction (0.005–0.2%), the patch test
(σ_zz uniform to 0.06%), two spheres colliding against Hertz (peak +2.3%,
duration −0.4%; the oracle case waits for a graded sphere mesher), a free
body untouched by general contact, determinism across threads. Oracle
measures gain `over` (ratios). Existing fixtures do not move.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
nl-hybrid-incompressible: 27 hybrid hex8 at ν = 0.4999 pulled to λ = 2 by a prescribed
displacement, against the compressible neo-Hookean closed form (1.4·10⁻⁹); its first
iterations need the LDLᵀ factorization. ROADMAP and parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Five cases against closed forms: a Mooney-Rivlin block in Treloar's
uniaxial, equibiaxial and pure-shear modes and a Yeoh block in uniaxial
tension (the compressible energy's stresses, exact); a stretched
Mooney-Rivlin tube inflated by a follower pressure (Rivlin's incompressible
solution, 0.6 % at nu = 0.4995); free and fully held thermal expansion at a
thermal stretch of 1.2 (exact); a bar held at its ends heated past yield
(exact). docs/fem.md, the literature, ROADMAP (M15, M17), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Four cases, each against its closed form: uniaxial tension of a J2 cube to a
logarithmic strain of 0.2 (Kirchhoff stress exact; 0.13 % from the explicit
solver's hypoelastic Cauchy stress, the elastic volume change between the two
laws), the Bauschinger effect of linear kinematic hardening on a load path
back to zero strain (exact), Hill's elastic-perfectly plastic thick cylinder
(bore displacement at a plastic radius of 1.5a within 0.009 %, collapse
pressure within 2e-8; the pending case is now active) and a cantilever's
plastic collapse, converged 3.1 % above beam theory's hinge, the bound a
continuum exceeds. docs/fem.md, the literature, ROADMAP (M15), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Theory cases for the nonlinear solver, each frozen as a fixture: uniaxial
stretch of a neo-Hookean block to twice its length (closed form), the
nonlinear patch test on a distorted hex8 mesh, a quarter turn of the same
mesh (objectivity: zero stress), the elastica of a hex20 cantilever at
P L²/(E I) = 1, 2, 5, 10 against Bisshopp–Drucker (0.2–0.5 %), and the
inflation of a thick neo-Hookean tube by a follower pressure against
Rivlin's closed form (0.08 % at the bore). A finite-strain Cook's membrane
is pending its transcribed reference. docs/fem.md describes the
formulation, the material point interface, the follower-pressure choice and
what nonlinear steps refuse; the literature, parity and roadmap pages
follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Structured hex meshing: multi-level extrude and revolve, one-to-one sweep, mapped blocks (M5)
modelcraft_mesh::hex::hex_mesh meshes a face-tagged boundary surface with
hexahedra by the first structured method that fits: a straight or
rotational multi-level sweep (imprinted cross-section arrangement, cuts at
reflex corners, mapped/annulus/free regions), a one-to-one sweep through
rings of linking faces (least-squares affine layers with residual
correction), or a mapped logical cube (trivariate transfinite
interpolation). Interval assignment couples shared curves; boundary quads
carry B-rep face tags; the certified validity gate, a tiling check and a
fidelity check guard the output; hex20 mid-edge nodes go onto the faces.
Shape::face_surfaces exposes the analytic face surfaces; the corpus runner
gets a structured hex column.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh.hex.generate: structured hex meshing as a command
Meshes one body, every body of the open design or an imported surface,
replaces the mesh, tags element faces with the B-rep faces (so sets by
geometry resolve) and reports per body the method, counts and quality.
The quality pass certifies each element once and feeds the validity gate
(quality::validity_gate_checks). Shape::size gives the cached body size
for defaults instead of a full measure.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: disk O-grids, convex interval cost, early size guard, hex20 corpus column
Smooth single-loop sections (cylinders, tori, vases) get a butterfly O-grid
instead of the free mesher; interval assignment raises counts by the
squared relative error so equal sides share increments evenly; a mesh far
beyond the element limit is refused before any work and mapped limits are
no longer swallowed. The corpus reports hex8 and hex20 quality.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Catalogue: structured hex commands ready (mesh.hex.sweep, mesh.hex.mapped, mesh.hex.generate)
mesh.hex.sweep and mesh.hex.mapped run mesh.hex.generate with the sweeping
methods or the mapped one; mesh.hex.generate is the sweep entry's related
command. The planned M6 octree entry moves to mesh.hex.octree (its icon
renamed with it). docs/features.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Docs: structured hex literature (B8), architecture, roadmap, parity; corpus hex column
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: simplify review fixes
Prepare each sweep frame's cross-section once (arrangement, cuts, fill)
and reuse it across refinement retries; candidate frames come from one
setup pass. Edge triangles come from the feature edges, layer counts go
through size::edge_divisions, sweep residual weights are computed once
per node, flux shape functions live on the stack, and the arrangement's
exact side test and distances serve the region probe. The engine takes
the boundary options mesh.tet.generate takes and names unnamed faces by
index like it; the corpus hex20 run reuses the winning method; the
mapped entry lists mesh.hex.generate too; the octree icon is redrawn
under its new id.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic,
hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook
D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry
(default on) and stress_rate (jaumann | green_naghdi).
- fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return,
capped bracketed Newton for Johnson-Cook, damage; the update takes the
mechanical strain increment so thermal strains can be subtracted), closed-form
hex8 gradients for deformed configurations.
- explicit: updated Lagrangian hex8/tet4, per-element material state, erosion
with reported energy, plastic work in the energy account.
- solver: warns that the linear solver uses the elastic constants of plastic
materials (results hash-identical).
- decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1,
LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a
format cannot express is reported as Unsupported.
- engine: model.material.plasticity, model.material.damage (catalogue ready),
explicit element probe, eroded elements in the solve summary.
Step commits before the rebase onto the DOF framework: branch explicit-x2-steps.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fem: wedge6 element (triangle × interval, 3 × 2 points), patch and cantilever tests
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver: reference points, kinematic and distributing couplings, moments by constraint elimination
Coupled reference points get six degrees of freedom; kinematic couplings are rigid
links, distributing couplings least-squares interpolation constraints. Every
constraint row and prescribed value is eliminated master-slave (Abel-Shephard
pivot choice), so the reduced matrix stays SPD; no coupling gives the old
elimination bit for bit. Verified: rigid motion of a coupled block, clamping
through a point, distributing tension vs pressure, bending and tube torsion.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: reference point results in solve.static and solve.probe
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: couplings, moments and wedge6 in the solver docs, literature and roadmap
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver: simplify constraint elimination and reference point plumbing
Rows combine by one sort; T_f transposed once; K and M reduced in one pass on a
shared pattern; prescribed motion computed once; reference point loads and BCs go
through Resolved like node ones (Mesh::label_dofs); one dof-direction rule;
StepResult::locate for probes; dead Csr::restrict removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver: refuse oversized reductions before allocating them
A held distributing coupling point makes a dense (3N)^2 block; estimate it from
the constraint rows and refuse it against the factorization's memory budget
with a clear message, before anything is built. Other reductions with
dependents count their entries first (stopping at the budget) and reserve
fallibly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Renumber the layer table for solver crates: fem at L1, solver at L2, fsi at L3
L0 model -> L1 geometry, mesh, fem, decks, render -> L2 solver (explicit, lbm later)
-> L3 fsi (later) -> L4 doc -> L5 io -> L6 engine -> L7 ui-egui, mcp -> apps.
UI_MIN_LAYER moves to 7, the testkit sits above it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* modelcraft-fem: element kernels for tet4, tet10, hex8 (full, incompatible modes), hex20 (full, reduced)
Shape functions, Gauss and conical-product quadrature, stiffness, consistent and HRZ-lumped
mass, body forces, consistent pressure loads on faces, integration-point stresses and their
least-squares extrapolation to nodes, isotropic and orthotropic elasticity. The element table is
one row per kind, so wedges, shells and beams are added locally.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* modelcraft-solver: linear static and frequency analysis with an analytic verification suite
Assembly from the resolved model on the node graph, boundary conditions by elimination,
consistent pressure, gravity and body-force loads, nested-dissection ordering, sparse up-looking
Cholesky with a factor-size cap, reactions, integration-point and nodal-averaged stresses, von
Mises; shift-invert block Lanczos with full reorthogonalization for natural modes, participation
and effective mass. ADR 0001 records the own-linear-algebra decision (determinism, wasm).
Verified against closed forms: displacement and traction patch tests for every element, cantilever
tip deflection (Timoshenko) with convergence rates, Lamé cylinder, Kirsch hole (Kt -> 3),
cantilever and free-free beam frequencies with six rigid-body modes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Engine: solve.static, solve.frequency and solve.probe; results kept in the session
Results are stored per step, restored on a failed command and cleared when the model changes.
Caps (degrees of freedom, factor entries, Lanczos vectors) may only be lowered; hostile parameters
are tested against a solvable session.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: implicit solver architecture, roadmap M4, parity and references
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Simplify the solver: shared face integration, block assembly, cached extrapolation
- model: one face integrator (nodal::face_normal_weights) for tractions and pressures
- fem: mid-side tables from ElementKind::edges, orthotropic via inverse3, symmetric
accumulation without a symmetrize pass, incompatible-mode recovery without K_uu, model's
coordinate check, dead table rows removed
- solver: one pattern search per node pair (block, scalar and diagonal adds), extrapolation built
once per element type, reactions from the prescribed rows only, matrices dropped after
restriction, the free-body shift keyed on the factorization error, step selection in the solver,
Error::Element naming the element
- engine: the solver owns the default step and the shift check; the model comparison runs once
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: results are stamped with the session revision
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* modelcraft-io: the .modelcraft file (modelcraft/1), atomic writes, autosave storage
A stored ZIP of a manifest (format tag, geometry sources with SHA-256,
part sizes and hashes), the model definition as stable pretty JSON, the
mesh and geometry tags in a compact binary part, and the journal one
command per line. Reading caps every size, checks every checksum and
replays the model through its checked methods. Model::without_mesh and
empty mesh fields left out of the model's JSON; geometry::read_file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: undo/redo on the journal, file.open/save/save_as, autosave and recovery
CommandSpec gains a kind: Model commands are journalled and become undo
steps; Session commands (file.*, edit.*) manage the session. Undo history
is bounded by steps and estimated memory. Geometry sources are recorded
with content hashes and reopened on file.open (missing or changed files
are warnings). Desktop app autosaves every 30 s and reports recoverable
models; Ctrl/Cmd+Z and Shift+Z/Y undo and redo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: the .modelcraft format, undo history, roadmap and parity status
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared path parameter, one load path for open/recover, history accounting in History
Session commands skip the per-command model copy; saved revision is an
Option; journal written from borrowed entries and read without an
intermediate tree; backups copied by the file system; recovery lock and
error helpers; geometry file wrappers use read_file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* model: split nodes and elements into a mesh module (no behaviour change)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model: sets by geometry name, materials and units, sections, couplings, BCs, loads, steps and the check
Sets bind to persistent geometry names through the mesh's geometry tags
(element, element face/edge and node classification) and resolve against
the current mesh, so they survive a remesh. Steps list their active loads
and boundary conditions explicitly. Model::check names every missing or
bad item; Model::resolve gives the writers' view.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: model definition commands (sets, materials, sections, RPs, couplings, BCs, loads, steps, tags, check)
Each definition has create/edit/delete with its model JSON form as
parameters; model.step.activate and model.activity drive the explicit step
table; mesh.tag records where the mesh lies on the geometry; model.check
and model.set.resolve report against the current mesh. Hostile params run
against an empty and a fully defined session.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: model definition in architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model, engine: review cleanups
Validated deserialization (a file replays through the checked methods),
interned geometry tags by index, set resolution with tag bitsets and sorted
vectors, one delete policy (a load or BC listed by a step is in use),
shared helpers (context, remove_existing, step_mut, opt/req/name/listed),
dead code removed, Resolved without a per-element section map.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model: mesh-independent force distribution, tractions, stable reference point labels
Force and moment on a set default to a total, split by consistent nodal
weights over the set's faces (or equally over a node set); per_node is an
explicit opt-in. Traction is force per area. resolve() expands them to
nodal values for every writer and the solver. Reference points keep a
stored node label taken from the top of the label range.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
One end-to-end slice first (sets bound to SolidCraft names, materials, sections, BCs, loads,
steps, three deck writers, own solve) on tet meshes; then structured hex (sweep, mapped,
automatic decomposition) before octree all-hex; then contact, materials and explicit, and
post-processing. docs/parity.md lists capabilities by milestone, with the areas where we aim
to be better than Abaqus/CAE.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
