arc-shallow-arch: a sinusoidal arch of 40 × 2 × 1 hex20 under a sinusoidal dead load scaled to
the one-mode closed form's upper limit load: the upper limit point at 0.992 (−0.8 %), the lower
at 0.219 (0.8 % of the peak load) and exactly one negative eigenvalue between them. ROADMAP and
parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
buckle-euler-pinned and buckle-euler-cantilever (hex20 columns, −0.18 % from Euler with
Engesser's shear correction) and buckle-plate-square (a simply supported square plate, b/t =
100, −0.39 % from k = 4; the support and thickness choices in its README). ROADMAP and parity
updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Segment-to-segment penalty contact between element faces: each secondary
face and each main face facing it are projected onto the secondary face's
plane, split into triangles, clipped (Sutherland–Hodgman) and integrated
with a three-point rule per sub-triangle (Puso–Laursen segmentation, the
penalty at the integration points as Fischer–Wriggers), so a uniform
pressure gives the consistent nodal forces on both meshes and the contact
patch test passes on non-matching meshes. Every contact runs both ways at
half the penalty: pairs with each surface as the secondary, general and
self contact face against face. A bucket grid of face boxes every
increment, faces integrated in parallel and their forces added in face
order: the same numbers on any thread count.
The penalty per area ε = s γ min(m/A)/Δt² comes from the lumped masses,
each node's directional area and the stable increment, bounded by
Gershgorin's row sums so contact never shortens the increment. Coulomb
friction with exponential decay by a regularised return map at the
secondary nodes; rigid walls take Coulomb impulses. Contact work and
friction dissipation join the energy balance; each contact reports its
peak force, first and last contact, deepest penetration, friction and the
nodes adjusted at the start (initial penetrations adjusted strain-free or
refused with the node, face and depth); a cap on contact faces.
Verified (crates/explicit/tests/contact.rs, tests/oracle/explicit-*):
colliding bars (2L/c +1.2%, ρcAv₀/2, KE kept to 0.005%, contact energy
back to 8e-5 of it), blocks sliding to a stop on a rigid wall and on a
plate under constant and decaying friction (0.005–0.2%), the patch test
(σ_zz uniform to 0.06%), two spheres colliding against Hertz (peak +2.3%,
duration −0.4%; the oracle case waits for a graded sphere mesher), a free
body untouched by general contact, determinism across threads. Oracle
measures gain `over` (ratios). Existing fixtures do not move.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
nl-hybrid-incompressible: 27 hybrid hex8 at ν = 0.4999 pulled to λ = 2 by a prescribed
displacement, against the compressible neo-Hookean closed form (1.4·10⁻⁹); its first
iterations need the LDLᵀ factorization. ROADMAP and parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The bracket's tet mesh is not bit-identical across platforms (#115): its fillet peak is 213.31 MPa
on macOS and 212.42 on Linux CI, which turned the oracle job red after #110. Those two quantities
are no longer frozen; the page names them mesh-dependent instead of printing one platform's value.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The end-to-end demo met a raw-CDT sliver that the validity gate accepted (exactly positive) and
the solver refused. Now:
- One validity criterion, `fieldcraft_model::admissible_jacobian` (normalized Jacobian above
1e-12), used by the implicit solver (fem `positive_inverse`), the explicit tet4/hex8
kinematics and the mesh gate, which proves it on the whole element (tet4: the solvers' own
Jacobian; curved kinds: a Bernstein floor), so whatever passes the gate passes the solvers.
- CDT rounding repaired by flips on the rounded mesh (Diazzi et al. 2023 §5.1) instead of the
±2-ulp nudge.
- `fieldcraft-mesh::tet`: a mutable tetrahedral complex whose every change is a checked
replacement (positive and admissible tetrahedra, faces matched with opposite orientation) with
an exact undo log; edge removal (Klincsek), multi-face removal, Delaunay insertion with
boundary faces, edge collapse; a curvature- and thickness-graded size field; constrained
Delaunay refinement with encroachment splits; ODT smoothing; the Klingner–Shewchuk schedule;
boundary vertices moved onto the exact B-rep surfaces at the end; tet10 with mid-edge nodes on
the geometry.
- `mesh.tet.generate` gains size, order, quality, quality_target, curvature_angle, grading,
max_passes, max_points and reports the CDT's and the mesh's quality; `solve.probe` takes a set
and reports its largest von Mises stress.
- Oracle cases filleted-bracket-fillet-stress(-coarse): the fillet's peak von Mises stress on
tet10 meshes of 2k and 13.5k elements, 213.3 MPa (a four-level study stays within 1.8%); the
CDT cases keep the raw tetrahedralization.
- Corpus quality columns: all 20 valid parts mesh and pass the gate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A slow theory case: the corpus bracket meshed by mesh.hex.octree at 7, 5 and 4 mm, clamped
at the base and loaded by 2 kN. Checks equilibrium, that every element is certified valid,
the mesh volume against the CAD volume, the beam bending stress of the upright leg
(sigma = M c / I = 145.3 MPa, within 5%) and the convergence of the fillet von Mises stress
against the 4 mm mesh.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Five cases against closed forms: a Mooney-Rivlin block in Treloar's
uniaxial, equibiaxial and pure-shear modes and a Yeoh block in uniaxial
tension (the compressible energy's stresses, exact); a stretched
Mooney-Rivlin tube inflated by a follower pressure (Rivlin's incompressible
solution, 0.6 % at nu = 0.4995); free and fully held thermal expansion at a
thermal stretch of 1.2 (exact); a bar held at its ends heated past yield
(exact). docs/fem.md, the literature, ROADMAP (M15, M17), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Four cases, each against its closed form: uniaxial tension of a J2 cube to a
logarithmic strain of 0.2 (Kirchhoff stress exact; 0.13 % from the explicit
solver's hypoelastic Cauchy stress, the elastic volume change between the two
laws), the Bauschinger effect of linear kinematic hardening on a load path
back to zero strain (exact), Hill's elastic-perfectly plastic thick cylinder
(bore displacement at a plastic radius of 1.5a within 0.009 %, collapse
pressure within 2e-8; the pending case is now active) and a cantilever's
plastic collapse, converged 3.1 % above beam theory's hinge, the bound a
continuum exceeds. docs/fem.md, the literature, ROADMAP (M15), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
filleted-bracket-blocks splits the bracket with SolidCraft's Split Body
into three slabs across its width, the fillet corner halved along its
diagonal and a four-cell O-grid round each hole; the corpus runner meshes
partitioned parts as one conforming block mesh. A heavy test clamps the
upright, loads the foot and checks hex8 and hex20 converge (hex20 tip
deflection within 0.1 % of a fine tet10 solution). Roadmap M5:
conforming interfaces done.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Theory cases for the nonlinear solver, each frozen as a fixture: uniaxial
stretch of a neo-Hookean block to twice its length (closed form), the
nonlinear patch test on a distorted hex8 mesh, a quarter turn of the same
mesh (objectivity: zero stress), the elastica of a hex20 cantilever at
P L²/(E I) = 1, 2, 5, 10 against Bisshopp–Drucker (0.2–0.5 %), and the
inflation of a thick neo-Hookean tube by a follower pressure against
Rivlin's closed form (0.08 % at the bore). A finite-strain Cook's membrane
is pending its transcribed reference. docs/fem.md describes the
formulation, the material point interface, the follower-pressure choice and
what nonlinear steps refuse; the literature, parity and roadmap pages
follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The demo used the corpus I-beam, which is extruded along z and so stood
upright. A new corpus part, cantilever-i-beam, is the same section on the
YZ plane extruded along x, web upright: a sweep along a horizontal axis
for the meshers, and a cantilever that bends downward on screen. The
i-beam part is unchanged (its corpus row and the meshing tests keep it).
The demo clamps it at x = 0 and loads the free end with 1000 N in -z
through a kinematic coupling, and now checks the solution against beam
theory and stops when it is off: tip deflection (bending plus shear)
within 3 %, root bending stress (stress_xx along the top flange,
extrapolated to the root, nodes from the Abaqus deck) within 2 %.
docs/meshing/corpus.md regenerated with the new part.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Main's oracle job failed at 8cba3a7: scordelis-lo-roof-solid u_z moved from
-0.3014029226397275 (blessed before #50) beyond its 1e-9 band. The case is a
thin shell (R/t = 100) of one layer of hex20R solids, ill-conditioned, so
rounding alone moves u_z by about 1e-9 relative: on macOS #50's multithreaded
supernodal factorisation moved it by 8.2e-10 (to -0.3014029223929), #52's
interpolation order by a further 1.3e-10 (to -0.3014029223541), and Linux
CI by slightly more, past the band. #52 kept the lattice geometry the same.
The result itself is unchanged at the 1e-9 level (0.33% from the
reference).
A quantity may now set `fixture_relative` (with a required
`fixture_reason`) for a wider fixture band; Scordelis-Lo uses 1e-7 and is
re-blessed. Moved-fixture messages print full precision.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh: one transfinite interpolation for mapped hex and mesh.block; stable oracle report
mesh.block's lattice is now built from the structured hex mesher's
transfinite code: faces by quad::transfinite_grid, the interior by the new
quad::transfinite_volume (Gordon-Thiel, blended by the block's graded
parameters), which hex::mapped now calls too. 2D patches are the
transfinite_grid of their sides. Edge curves return their corners exactly.
Oracle: a zero-reference quantity (rounding noise) keeps its absolute
tolerance as its fixture band, and docs/oracle.md shows such noise and
relative errors inside the fixture band as bounds, so the report no longer
changes with the order of floating-point operations (it failed the
'docs/oracle.md is current' check on main after #50). Scordelis-Lo moved by
1.4e-9 relative (an ill-conditioned thin shell of solids: sub-ulp node
changes) and is re-blessed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared face filling and lattice index; faces blended like the volume; exact ends for every edge
quad::transfinite_faces fills a block's six faces (with a per-face hook
that hex::mapped uses to project onto its B-rep faces) and
quad::lattice_index fixes the lattice layout for all three users.
transfinite_grid_blended blends faces by the block's graded parameters, so
faces and interior use one parametrisation and mesh.block reproduces its
earlier Gordon-Hall lattice (the Scordelis-Lo fixture is back to its
blessed value). Straight edges also return their corners exactly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
The pending 2D LE1 case becomes a real one; the plasticity cases stay
pending with what they still need (static J2 for the collapse pressure,
the transcribed measurements for the Taylor bar).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The large-deformation explicit core of #42 (objective stress rates, updated
kinematics) moves the bar wave and rigid-wall impact results by a few 1e-4
relative; both still pass their references (u_end 0.034%, rebound KE
-0.54%). Fixtures updated deliberately for that change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The oracle binary (modelcraft-testkit) runs each case's recipe through the
command engine, measures its quantities by JSON pointers into step outputs
or commands, compares them with the cited references and the frozen
fixtures, and writes docs/oracle.md. 20 theory cases (patch tests of every
solid element, Timoshenko cantilevers, Lame, Kirsch, beam frequencies,
torsion and bending through couplings, explicit waves and impact, CDT
invariants), 8 published benchmarks (MacNeal-Harder patch, straight and
curved cantilevers, thick cylinder, Scordelis-Lo with solids, NAFEMS LE1,
LE10, FV32) and 10 pending cases with citations.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
