A tie names a main and a secondary face set and an optional position tolerance; it refers to
its sets, round-trips, is bounded in number and checked for solid faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An explicit step may ask for mass scaling to a target time increment (on
a set, or the whole model): elements whose stable increment is below it
get the density that reaches it, with their lumped masses, frequency
bound and hourglass scales; adiabatic heating keeps the physical
density. The run reports the elements scaled, the added mass in all and
per section with its fraction, a warning, and the added mass's kinetic
energy in the energy account. Verified on a uniform bar scaled to twice
its increment (added mass 3×, increment doubled, a quarter of the
kinetic energy left to the physical mass). ROADMAP and parity note the
hyperelastic materials and mass scaling.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
NonlinearStatic.arc_length {constraint, max_load_factor, displacement_limit}: Riks–Crisfield
arc-length increments (cylindrical or spherical arc, tangent predictor signed by the angle
criterion, the constraint's quadratic root chosen by the angle with the last iterate), arcs
grown, shrunk and cut back as increments are. The converged state's tangent is factored for the
next predictor (LDLᵀ when indefinite); its negative eigenvalues are recorded per increment and
changes in their count are reported as limit or bifurcation points. Ends at the maximum load
factor, a displacement limit or the increment cap. Abaqus *STATIC, RIKS; LS-DYNA refuses it by
name; forms gain the arc-length group. A shallow arch of hex20 snaps through on the closed-form
path (1.9 %), both limit points found, inertia 0 → 1 → 0 between them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
NonlinearStatic.imperfection {step, mode, scale}: the buckling step's mode, scaled to a largest
component of `scale`, is added to the node coordinates before the step is solved, with a warning
naming it; Abaqus and LS-DYNA decks refuse it by name. A clamped–free column with its first mode
as imperfection under half its buckling load amplifies it by 1/(1 − α) within 2.8 %.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Contact definitions on face sets: a pair (each surface's nodes against the
other's faces), general contact on a surface (self contact) or on every
exterior face of the solids; Coulomb friction with static and kinetic
coefficients and an exponential decay, a penalty scale and the choice to
adjust or refuse initially penetrating nodes, validated with caps. Rigid
walls of explicit steps gain friction. The check wants solid faces on
contact surfaces; sets used by a contact cannot be deleted.
fem::contact: the closest point of a triangle (Ericson) or a bilinear
quadrilateral (projected Newton) to a point, and a bucket grid of face
boxes for the global search, deterministic and bounded.
Commands interaction.contact.pair, .general, .edit, .delete and .find
(the touching parts of the mesh, with face sets and pairs made of them);
contacts in the model browser. Abaqus writes *SURFACE INTERACTION with
*FRICTION (exponential decay), *CONTACT PAIR and general *CONTACT; LS-DYNA
*CONTACT_AUTOMATIC_SURFACE_TO_SURFACE and _SINGLE_SURFACE with FS, FD, DC;
Nastran refuses contact by name. The implicit solver refuses contact by
name (M7); the explicit solver refuses it until the next commit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The end-to-end demo met a raw-CDT sliver that the validity gate accepted (exactly positive) and
the solver refused. Now:
- One validity criterion, `fieldcraft_model::admissible_jacobian` (normalized Jacobian above
1e-12), used by the implicit solver (fem `positive_inverse`), the explicit tet4/hex8
kinematics and the mesh gate, which proves it on the whole element (tet4: the solvers' own
Jacobian; curved kinds: a Bernstein floor), so whatever passes the gate passes the solvers.
- CDT rounding repaired by flips on the rounded mesh (Diazzi et al. 2023 §5.1) instead of the
±2-ulp nudge.
- `fieldcraft-mesh::tet`: a mutable tetrahedral complex whose every change is a checked
replacement (positive and admissible tetrahedra, faces matched with opposite orientation) with
an exact undo log; edge removal (Klincsek), multi-face removal, Delaunay insertion with
boundary faces, edge collapse; a curvature- and thickness-graded size field; constrained
Delaunay refinement with encroachment splits; ODT smoothing; the Klingner–Shewchuk schedule;
boundary vertices moved onto the exact B-rep surfaces at the end; tet10 with mid-edge nodes on
the geometry.
- `mesh.tet.generate` gains size, order, quality, quality_target, curvature_angle, grading,
max_passes, max_points and reports the CDT's and the mesh's quality; `solve.probe` takes a set
and reports its largest von Mises stress.
- Oracle cases filleted-bracket-fillet-stress(-coarse): the fillet's peak von Mises stress on
tet10 meshes of 2k and 13.5k elements, 213.3 MPa (a four-level study stays within 1.8%); the
CDT cases keep the raw tetrahedralization.
- Corpus quality columns: all 20 valid parts mesh and pass the gate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
NonlinearStatic::load_path gives the load factor against the step fraction,
piecewise linear from [0, 0] to fraction 1, so a step can unload or reverse
its loads and prescribed displacements (cyclic loading of path-dependent
materials). Validated (2 to 1000 finite points, increasing fractions), with
load_factor and next_turn for the solver's increments.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A nonlinear_static procedure (nonlinear geometry, initial/min/max increments,
increment and iteration caps, force/displacement/energy tolerances, line
search), validated with caps against hostile values. Materials gain an
explicit hyperelastic option (decoupled compressible neo-Hookean on the
isotropic constants). Abaqus writes *STEP, NLGEOM, INC / *STATIC with the
increments and *HYPERELASTIC, NEO HOOKE; LS-DYNA writes the ramped implicit
run with full Newton and *CONTROL_IMPLICIT_AUTO; Nastran refuses SOL 400 by
name, as LS-DYNA does hyperelastic materials in nonlinear steps. Explicit
dynamics refuses hyperelastic materials by name; solve.run names the solver
still to come.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Heat transfer and thermal stress: thermal materials, temperature BCs, heat loads, heat transfer and coupled temperature–displacement steps, solve.heat
Model: Material.thermal (conductivity, specific heat, expansion, isotropic or
per axis; reference temperature), BoundaryCondition::Temperature (dof 11),
loads SurfaceFlux, Convection, HeatSource and Temperature (a field in static
steps), procedures HeatTransfer { transient (θ-method) } and
CoupledTemperatureDisplacement; checks for missing conductivity/specific
heat/expansion. fem: heat conduction kernels (conductivity, capacity,
source, face flux/film, heat flux) on the DofLayout (one T per node), thermal
strain load and stress D(ε − ε_th) for every solid formulation incl.
incompatible modes. Solver: steady and transient heat transfer, thermal loads
in static steps, coupled steps (exact one-way coupling). Engine: solve.heat,
temperature/heat-flux result fields, probes. Decks refuse heat transfer by
name. Analytic verification: slab, source+convection/flux, thick cylinder,
erfc semi-infinite solid, free/constrained expansion, bimetal strip, coupled
step.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: strains in 2D elements and explicit dynamics
Plane::thermal_load and stresses_with for plane stress (εzz free), plane
strain (σzz = −D₃·ε_th) and axisymmetric elements, incompatible modes
included; the solver's 2D kernels take them. Explicit dynamics turns a
step's temperature loads into a per-element thermal strain rate (reached
linearly over the step) subtracted from each strain increment, so it feeds
J2 and Johnson–Cook updates. Verified: free expansion in every 2D theory
and element, a biaxially held plate, an explicit free bar (ΔL = αΔT L,
stress-free) and a clamped bar at −EαΔT, capped at the yield stress with
perfect plasticity.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* clippy
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: trusses take the axial thermal strain; keep the roadmap's M7 line
Truss::thermal_load and stresses_with project the thermal strain on the
member's tangent (Σ αₖ tₖ² ΔT); the static solver applies them to rod2/rod3
(#38). Explicit trusses take none yet and a warning says so.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic,
hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook
D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry
(default on) and stress_rate (jaumann | green_naghdi).
- fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return,
capped bracketed Newton for Johnson-Cook, damage; the update takes the
mechanical strain increment so thermal strains can be subtracted), closed-form
hex8 gradients for deformed configurations.
- explicit: updated Lagrangian hex8/tet4, per-element material state, erosion
with reported energy, plastic work in the energy account.
- solver: warns that the linear solver uses the elastic constants of plastic
materials (results hash-identical).
- decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1,
LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a
format cannot express is reported as Unsupported.
- engine: model.material.plasticity, model.material.damage (catalogue ready),
explicit element probe, eroded elements in the solve summary.
Step commits before the rebase onto the DOF framework: branch explicit-x2-steps.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on
the box faces, obstacle bodies with conditions on their named faces, initial
velocity, body acceleration); fluid steps with caps. Deck writers refuse
fluid steps; a fluid-only model needs no mesh in model.check; one step
selector (Model::select_step) for every solver.
New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo
forcing; halfway bounce-back walls (moving walls after Ladd), slip faces,
periodic pairs; Zou–He velocity and pressure faces with the D3Q19
transverse correction; obstacles voxelised from the face-tagged boundary
surface with exact predicates and symbolic perturbation; momentum-exchange
forces per box face and per B-rep face; unit conversion, automatic time step
and Mach/tau limits; bounded runs with frames and force histories.
Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary,
solve.fluid (obstacles from the open design or imported surfaces, lowerable
caps), solve.probe for fluid fields and wall force histories. Fluid Domain,
Inlet & Outlet and Lattice Boltzmann toolbar entries are ready.
Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second
order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green
decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere
array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to
round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* modelcraft-io: the .modelcraft file (modelcraft/1), atomic writes, autosave storage
A stored ZIP of a manifest (format tag, geometry sources with SHA-256,
part sizes and hashes), the model definition as stable pretty JSON, the
mesh and geometry tags in a compact binary part, and the journal one
command per line. Reading caps every size, checks every checksum and
replays the model through its checked methods. Model::without_mesh and
empty mesh fields left out of the model's JSON; geometry::read_file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: undo/redo on the journal, file.open/save/save_as, autosave and recovery
CommandSpec gains a kind: Model commands are journalled and become undo
steps; Session commands (file.*, edit.*) manage the session. Undo history
is bounded by steps and estimated memory. Geometry sources are recorded
with content hashes and reopened on file.open (missing or changed files
are warnings). Desktop app autosaves every 30 s and reports recoverable
models; Ctrl/Cmd+Z and Shift+Z/Y undo and redo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: the .modelcraft format, undo history, roadmap and parity status
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared path parameter, one load path for open/recover, history accounting in History
Session commands skip the per-command model copy; saved revision is an
Option; journal written from borrowed entries and read without an
intermediate tree; backups copied by the file system; recovery lock and
error helpers; geometry file wrappers use read_file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* model: split nodes and elements into a mesh module (no behaviour change)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model: sets by geometry name, materials and units, sections, couplings, BCs, loads, steps and the check
Sets bind to persistent geometry names through the mesh's geometry tags
(element, element face/edge and node classification) and resolve against
the current mesh, so they survive a remesh. Steps list their active loads
and boundary conditions explicitly. Model::check names every missing or
bad item; Model::resolve gives the writers' view.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: model definition commands (sets, materials, sections, RPs, couplings, BCs, loads, steps, tags, check)
Each definition has create/edit/delete with its model JSON form as
parameters; model.step.activate and model.activity drive the explicit step
table; mesh.tag records where the mesh lies on the geometry; model.check
and model.set.resolve report against the current mesh. Hostile params run
against an empty and a fully defined session.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: model definition in architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model, engine: review cleanups
Validated deserialization (a file replays through the checked methods),
interned geometry tags by index, set resolution with tag bitsets and sorted
vectors, one delete policy (a load or BC listed by a step is in use),
shared helpers (context, remove_existing, step_mut, opt/req/name/listed),
dead code removed, Resolved without a per-element section map.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model: mesh-independent force distribution, tractions, stable reference point labels
Force and moment on a set default to a total, split by consistent nodal
weights over the set's faces (or equally over a node set); per_node is an
explicit opt-in. Traction is force per area. resolve() expands them to
nodal values for every writer and the solver. Reference points keep a
stored node label taken from the top of the label range.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* mesh: element quality metrics and a certified Jacobian validity check
Bernstein-form Jacobian determinants for tet4/tet10/wedge6/hex8/hex20, certified
by bounds and subdivision (Johnen-Remacle-Geuzaine 2013); Shewchuk 2002 tet
metrics, Knupp 2001 hex/wedge/quad metrics; quality report and the validity
gate meshers run on their output.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.quality command; model documents its node order
mesh.quality reports certified validity, volume and per-metric statistics with
fixed-range histograms. The model's ElementKind doc states the Abaqus/VTK node
order and that deck code reorders formats like Nastran CHEXA20.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* quality: simplify after review; exact orient3d for tet4; gate on raw mesher arrays
- tet4 validity from the exact orient3d of the input coordinates
- validity_gate_elements takes (label, kind, coordinates) straight from a mesher
- one Jacobian per solid; certify caches piece bounds; product weights precomputed
- model::check_coordinates shared by set_node and quality; ElementKind is Ord
- engine: shared labels() parameter parser
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
A pure-Rust CAE modeling workspace following the SolidCraft conventions:
- modelcraft-model: nodes and elements by label with hostile-input validation
- modelcraft-geometry: SolidCraft's kernel (pinned git dependency) behind our own API;
tessellation into a face-tagged boundary surface for volume meshing
- modelcraft-engine: CommandSpec registry, Session::execute with rollback and panic guard,
scripts and a journal
- modelcraft-cli: list commands, run scripts
- xtask: layers (only geometry may use solidcraft-*), assets, licences, tests, wasm, ci
- AGENTS.md, architecture, ADR 0001 (libraries and licences), roadmap, CI
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
