* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
cargo xtask app-icon computes an isometric L bracket with a bolt hole and a
structured hexahedral mesh (O-grid around the hole), draws it with
vectorcraft-cli and writes icon.svg/png, small-size artwork, the iconset,
icns, ico, an Icon Composer ModelCraft.icon (floor grid Default/Dark, part,
mesh) and its actool Assets.car. The desktop app uses the 256 px export as
its window icon, falling back to eframe's default if it cannot be decoded.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on
the box faces, obstacle bodies with conditions on their named faces, initial
velocity, body acceleration); fluid steps with caps. Deck writers refuse
fluid steps; a fluid-only model needs no mesh in model.check; one step
selector (Model::select_step) for every solver.
New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo
forcing; halfway bounce-back walls (moving walls after Ladd), slip faces,
periodic pairs; Zou–He velocity and pressure faces with the D3Q19
transverse correction; obstacles voxelised from the face-tagged boundary
surface with exact predicates and symbolic perturbation; momentum-exchange
forces per box face and per B-rep face; unit conversion, automatic time step
and Mach/tau limits; bounded runs with frames and force histories.
Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary,
solve.fluid (obstacles from the open design or imported surfaces, lowerable
caps), solve.probe for fluid fields and wall force histories. Fluid Domain,
Inlet & Outlet and Lattice Boltzmann toolbar entries are ready.
Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second
order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green
decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere
array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to
round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
