Suppresses the SolidCraft features named (holes filled, fillets and chamfers back to
their sharp edges, bosses removed) and rebuilds the design; a feature that cannot be
suppressed alone is merged into its neighbour for meshing only. Kept in the model,
replayed on open, undoable; geometry.defeature.delete turns them back on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.size.set adds a size control on faces, bodies, a box or a sphere;
mesh.size.growth sets the growth rate; mesh.size.clear and
mesh.size.list. The tet mesher bakes the controls into its graded field,
the hex meshers, cells and the octree take the graded RegionSize, and
the block projection and mesh plans divide their edges by it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.face.split {name, face, datum} records a face split; it is
applied after the merges whenever the design is opened or cut again,
follows its datum (which it holds), undoes, and is saved with the
model. geometry.face.split.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.stitch {name, surface, tolerance} records a stitch; the
surfaces keep what was read (TaggedSurface::original) and are stitched
again from it whenever a surface is imported, the model opened, or a
stitch added or deleted (geometry.stitch.delete). Opening a model also
warns about merges that no longer apply.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.faces.merge {name, faces} records a face merge in the model;
it is applied after the partitions whenever the design is opened or cut
again, undoes through the journal and is saved with the model. Meshers,
mesh.plan (features and rings see merge:<name>; a merged face is
prismatic when its B-rep faces are), checks and the viewport see one
face, drawn in the warm colour. geometry.faces.merge.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.node.relax takes faces: [{body, face}] (every node on those B-rep
faces and the nodes of the elements touching them, sliding on the faces)
and elements in its form; the undocumented-by-form set is dropped.
A schema test checks every top-level key a params doc names is accepted,
which also found mesh.hex.extrude normal, mesh.hex.project max_arc_angle
and mesh.plan.apply name missing from their forms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Sides field kind: element faces or edges typed as element:side with
ranges (1-20:3, 25:1), no row cap, and Use selection for picked faces.
Set and mesh-tag forms use it instead of a JSON box (#449).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Two field kinds: NameOr (a name as a bare string, or an object of fields)
and RefText (a text per item of a collection). The mirror's plane is a
datum plane or a point and normal; its images a body name per body
(#449).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A PerAxis field kind: one value for every direction, or Per axis ticked
for one per axis. Thermal conductivity and expansion and the point mass
use it instead of a JSON box (#449).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Four field kinds in the schema, each checked and described in JSON Schema: labels (nodes or
elements, typed as 1-5, 8 with Use selection taking the viewport's picks), points (rows of
x, y, z, added and removed), multi (checkboxes: coupling DOFs, step output) and number or
auto (the deformed scale). Node and element lists, probe and Delaunay points and block
corners use them; the remaining JSON fields hold geometry-specific shapes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- geometry.bodies lists each body's vertices; geometry.datum.point by
vertex takes the design's vertex names (labelled Vertex, not Mesh
vertex) (#346).
- geometry.centre: the point for what is picked: a vertex, nodes, a
hole's centre (cylindrical faces or circular edges), else a centroid
(#351).
- mesh.cells' form: the cells first, and a method drop-down per cell
(schema kind RefChoices) instead of JSON (#344).
- interaction.rigid_wall(.delete): rigid walls of an explicit step from
the Interactions tab, no longer coming soon (#350).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every command with a schema now refuses a top-level key it does not take,
naming the key and the accepted ones (#316). A bad definition name's error
suggests the nearest valid one (#320). The load and material params docs list
the heat loads and the thermal block.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A datum point by coordinates, at a mesh vertex, a fraction along a
design edge, at a face's centre, or where a datum axis crosses a datum
plane. Datum planes take three datum points or a normal to a datum axis;
axes take two datum points. geometry.datum.edit, .axis.edit and
.point.edit redefine a datum of their kind (partitions cut again);
geometry.datum.delete with cascade also deletes the partitions that cut
by it. The ribbon shows Datum Plane, Datum Axis, Datum Point and
Partition, each with its own icon; edit and delete leave the ribbon
(still commands, claimed by their entries).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Problem::phrase serves both for_agents and for_form. A required name says "enter a name", a
path "enter a path", anything else "required" (no more "Autosave: enter an autosave"). New
kinds for what commands check (positive, range, list, name, path, invalid), and refine() to
look a command's problem up in its form.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Field gains `help`: one or two sentences of our own wording with a
typical value (yield stress: the initial yield, 276 MPa for 6061-T6,
250 MPa for mild steel; hardening modulus explained; and so on), set
next to each field in cmd/forms.rs. Dim::name gives the dimension
("stress"), Field::unit_label the unit or, with no unit system, the
dimension in brackets, and Field::help_text the tooltip with the unit or
where to set the unit system. The JSON Schema description carries the
help too. A test checks every form field has help and every dimensioned
field shows a unit or dimension in every system.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
schema::Problem now holds the &'static Field it is about and a ProblemKind
(Required, NotANumber, Below, Above, NotAChoice, UnknownVariant, ...).
Problem::for_form phrases it by the field's label, Problem::for_agents by
its JSON path, from the same data. The form no longer rewrites problem
text by string matching or re-walks the field tree; field_at moves to
schema.rs for the engine's own Param errors. The forms test matches
EngineError::Param { key, .. } directly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Datum planes by principal plane and offset, three points, or point and
normal; datum axes by principal axis, two points, or point and direction.
geometry.partition cuts the open design by a datum plane and keeps the
partition in the model, so geometry.open, file.open and undo cut the design
again. Requirements, forms and the Prepare entries are wired; features.md
lists them as ready.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Field, Kind, Dim and Collection describe a command's JSON parameters: numbers with
unit dimensions, choices, vectors, references to model items, groups, one-of
variants and rows. prefill, switch_variant and problems serve forms; json_schema
gives the same as JSON Schema. No command is described yet (form: None).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
