Demonstrate temperature slices and signed face-average wall heat with cool air passing an isothermal bracket. Register the original CPU-rendered gallery thumbnail and document the coarse transient setup.
Part of #157.
The window built a deformed copy of the model for every results plot,
which drops the geometry surfaces, so after a fluid solve the bracket
vanished and nothing else was drawn.
A fluid step's plot keeps the part as it is and draws the engine's flow
display through it (the same scene as the headless pictures): the
field on a slice, the part coloured by the flow beside it and
streamlines. The legend shows the field with its bands and the cells
of its extremes (Max/Min mark and turn the view to them); the results
panel swaps the deformation rows for the slice's normal and position,
the obstacles' colours, the streamlines and a frame slider, all
running the results.* commands. The status line describes the new
commands.
Part of #193.
Window captures (light theme, 1400 x 860) of every sample solved on the current UI; the
thumbnails that were viewport crops are now clean ui.render images like the others; the drop
test's figure at 0.1 ms reads 129 MPa.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The README video's model as a sample: the corpus cantilever-i-beam design opened as geometry,
swept all-hex, clamped at F2:start, 1 kN on F2:top through a kinematic coupling; static step
Load. It has a Start-card thumbnail and a gallery capture; a test checks its tip deflection
against beam theory with shear.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Delaunay refinement split a boundary face edge at its midpoint even when that
midpoint lay inside the diametral sphere of a feature edge beside it. Each such
split halves the face vertices' distance to the curve, so they piled up against
it (the heated bracket grew face vertices 0.016 mm from a 4 mm-sized edge), the
improvement schedule could not lift the tetrahedra there to its target, and
inserted vertex after vertex around them: 29257 elements and about two minutes
to open instead of 23641 and 6 s. The SolidCraft pin move (4c91f9b) added one
interior vertex to the bracket's end faces, which changed the CDT enough to
expose it.
Following Shewchuk (1998), an encroaching midpoint now splits the encroached
feature edge instead.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
examples.md and mcp.md tell the one-datum workflow and its numbers; the
crank gallery captures and Start card thumbnails are taken again on this
build; ROADMAP marks the automatic blocks of extruded cross-sections done,
and features.md's Decompose entry says what is left (3D parts).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crank-arm (and crank-mirror, kept as the same model under the name of
its mirror workflow) now cut the crank on its symmetry plane and the
half into seven cells: across the arm at x = 30, 60, 110 and 148, and on
two diagonals radial to the pocket's corner fillets. Every cell's
cross-section maps (four-sided blocks, the half O-grids round the bores,
triangle primitives at the pocket's corners); exact edge seeds give each
cut the same divisions on both sides, so mesh.cells merges all six cuts
and mesh.mirror reflects the half: 7 710 hex20, scaled Jacobian min 0.37
(was 0.17, and 0.009 for the swept mirrored half), edge ratio at most
7.0. Root σxx ±62.43 MPa against M/Z 62.6 MPa, the spindle carries the
1500 N. The test asserts the quality floor. Gallery images regenerated.
Fixes#247
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The first look at a solved static step draws the von Mises contours on the
true geometry; the deformed shape comes when asked for (Deformed,
results.deformed, results.animate), at the automatic scale. Frequency steps
still open on mode 1 deformed and explicit steps at true scale, as the
owner's notes in #77 ask; a 0.24 mm deflection drawn as 10 mm no longer
reads as a failed part.
Fixes#77
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample crank-mirror partitions the crank arm on its symmetry plane, sweeps
one half all-hex (hex20) and mirrors it into one conforming mesh, then defines
the crank-arm model. Samples may now run preparing commands (datums,
partitions) before their script sees the bodies. Its test checks the halves
alike and joined, every element valid and the sets on both halves; the heavy
test solves it: sigma_xx at the root -62.43 / +62.43 MPa against M/Z = 62.5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample crank-arm: a 170 mm 6061-T6 crank built in SolidCraft
(crates/engine/samples/crank-arm.json), swept along z by mesh.hex.generate
as 7274 hex20 elements of 3 mm (scaled Jacobian min 0.17). The hex variant
drops the pocket floor fillet and boss chamfers, and its root arcs meet the
bosses 20 degrees off tangent so the arm's top face has no zero-angle cusp.
The square bore is fixed and 1500 N acts on the pedal hole; the faces are
picked by their surfaces, not their names. Its heavy test matches the root
bending stress to M/Z = 62.6 MPa within 3 % (0.3 % in practice).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample bracket-hex: the corpus bracket split into 30 SolidCraft cells,
meshed by mesh.hex.blocks as one conforming hex20 mesh of 3 mm, clamped at
the upright and loaded at the foot. The sample's script finds the clamp and
load faces in every cell that has them. Its test matches the tip deflection
of a fine tet10 solution within 1 % and checks the clamp carries the load.
Closes#166
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample heated-bracket: the corpus filleted bracket in steel, tet10, its
hole bores clamped, the upright's end held at 120 C and the rest cooled by
still air; one coupled temperature-displacement step. Its test checks the
temperatures against the heater and the air, then warms the bracket evenly,
clamps one hole, and matches the free thermal expansion alpha dT times the
distance from the hole along x.
Closes#165
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample flow-past: air at 25 mm/s past the upright L-bracket in a box of
2.5 mm lattice cells (Re 83), inlet, outlet, a no-slip floor and slip walls;
the fluid step reports the force on each named face. Its test holds the
drag coefficient on the upright's frontal area between 1 and 3.5 (2.3) and
the lattice's mass change under 1 %. No picture: the viewport does not draw
flow results yet (M12).
Part of #164 (its streamlines wait for a flow display in the viewport)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample rubber-seal: a gasket ring of hybrid hex8 elements in four
mapped quarter blocks, squeezed 2.5 mm between plates bonded to it
(nonlinear static, Mooney-Rivlin rubber). Its test frees the plates and
matches the closed form for incompressible uniaxial compression within 3 %,
and bounds the bonded ring's extra stiffness. The plates are prescribed
displacements until implicit contact (#161) can press it into a groove.
Closes#163
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample drop-test: an L-bracket standing on its foot (a SolidCraft script
in sample.rs) swept into hex8, falling 2 m onto a rigid floor tilted 15 deg;
explicit dynamics for 1 ms with gravity and plasticity. Its test checks the
mass against rho V, the impact speed sqrt(2 g h) and kinetic energy, the
energy balance and the momentum the floor takes. docs/examples.md starts
with it, and its picture is docs/media/examples/drop-test.png.
Closes#162
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Christian Svensson