M0: xtask layers, parity, oracle, assets, ci; Fusion command catalog

Co-Authored-By: Claude Opus 5.5 <[email protected]>

docs/parity.md

@@ -0,0 +1,398 @@
+# Fusion command parity
+
+Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.
+
+**SOLID + SKETCH: 46 / 291 commands live (16%).** All Design tabs: 95 / 1175 (8%). Registered commands: 67.
+
+| Tab | Panel | Live | Total | % |
+|---|---|---:|---:|---:|
+| SOLID | CREATE | 7 | 35 | 20% |
+| SOLID | MODIFY | 7 | 32 | 22% |
+| SOLID | ASSEMBLE | 0 | 21 | 0% |
+| SOLID | CONFIGURE | 0 | 3 | 0% |
+| SOLID | CONSTRUCT | 0 | 20 | 0% |
+| SOLID | INSPECT | 1 | 25 | 4% |
+| SOLID | INSERT | 0 | 11 | 0% |
+| SOLID | SELECT | 0 | 15 | 0% |
+| SOLID | POSITION | 0 | 2 | 0% |
+| SKETCH | CREATE | 16 | 41 | 39% |
+| SKETCH | MODIFY | 2 | 12 | 17% |
+| SKETCH | CONSTRAINTS | 11 | 15 | 73% |
+| SKETCH | CONFIGURE | 0 | 3 | 0% |
+| SKETCH | INSPECT | 1 | 25 | 4% |
+| SKETCH | INSERT | 0 | 13 | 0% |
+| SKETCH | ASSEMBLE | 0 | 1 | 0% |
+| SKETCH | SELECT | 0 | 15 | 0% |
+| SKETCH | FINISH SKETCH | 1 | 2 | 50% |
+| SURFACE | CREATE | 1 | 25 | 4% |
+| SURFACE | MODIFY | 6 | 26 | 23% |
+| SURFACE | ASSEMBLE | 0 | 20 | 0% |
+| SURFACE | CONFIGURE | 0 | 3 | 0% |
+| SURFACE | CONSTRUCT | 0 | 20 | 0% |
+| SURFACE | INSPECT | 1 | 25 | 4% |
+| SURFACE | INSERT | 0 | 11 | 0% |
+| SURFACE | SELECT | 0 | 15 | 0% |
+| SURFACE | POSITION | 0 | 2 | 0% |
+| MESH | CREATE | 0 | 5 | 0% |
+| MESH | PREPARE | 0 | 4 | 0% |
+| MESH | MODIFY | 4 | 30 | 13% |
+| MESH | ASSEMBLE | 0 | 21 | 0% |
+| MESH | CONFIGURE | 0 | 3 | 0% |
+| MESH | CONSTRUCT | 0 | 20 | 0% |
+| MESH | INSPECT | 1 | 25 | 4% |
+| MESH | INSERT | 0 | 10 | 0% |
+| MESH | SELECT | 0 | 10 | 0% |
+| MESH | EXPORT | 0 | 1 | 0% |
+| MESH | POSITION | 0 | 2 | 0% |
+| FORM | CREATE | 1 | 14 | 7% |
+| FORM | MODIFY | 2 | 31 | 6% |
+| FORM | SYMMETRY | 0 | 6 | 0% |
+| FORM | UTILITIES | 0 | 5 | 0% |
+| FORM | CONSTRUCT | 0 | 20 | 0% |
+| FORM | INSPECT | 1 | 25 | 4% |
+| FORM | INSERT | 0 | 13 | 0% |
+| FORM | ASSEMBLE | 0 | 1 | 0% |
+| FORM | SELECT | 0 | 15 | 0% |
+| FORM | FINISH FORM | 0 | 1 | 0% |
+| SHEET METAL | CREATE | 2 | 19 | 11% |
+| SHEET METAL | MODIFY | 6 | 21 | 29% |
+| SHEET METAL | ASSEMBLE | 0 | 20 | 0% |
+| SHEET METAL | CONFIGURE | 0 | 3 | 0% |
+| SHEET METAL | CONSTRUCT | 0 | 20 | 0% |
+| SHEET METAL | INSPECT | 1 | 25 | 4% |
+| SHEET METAL | INSERT | 0 | 11 | 0% |
+| SHEET METAL | SELECT | 0 | 15 | 0% |
+| SHEET METAL | REFOLD | 0 | 1 | 0% |
+| SHEET METAL | POSITION | 0 | 2 | 0% |
+| PLASTIC | SETUP | 0 | 2 | 0% |
+| PLASTIC | CREATE | 7 | 35 | 20% |
+| PLASTIC | MODIFY | 7 | 32 | 22% |
+| PLASTIC | ASSEMBLE | 0 | 20 | 0% |
+| PLASTIC | CONFIGURE | 0 | 3 | 0% |
+| PLASTIC | CONSTRUCT | 0 | 20 | 0% |
+| PLASTIC | INSPECT | 1 | 26 | 4% |
+| PLASTIC | INSERT | 0 | 11 | 0% |
+| PLASTIC | SELECT | 0 | 15 | 0% |
+| PLASTIC | POSITION | 0 | 2 | 0% |
+| ASSEMBLY | INSERT | 0 | 8 | 0% |
+| ASSEMBLY | CREATE | 1 | 8 | 12% |
+| ASSEMBLY | RELATIONSHIPS | 0 | 11 | 0% |
+| ASSEMBLY | MOTION | 0 | 3 | 0% |
+| ASSEMBLY | MODIFY | 4 | 11 | 36% |
+| ASSEMBLY | CONTACT | 0 | 2 | 0% |
+| ASSEMBLY | CONFIGURE | 0 | 3 | 0% |
+| ASSEMBLY | CONSTRUCT | 0 | 20 | 0% |
+| ASSEMBLY | INSPECT | 1 | 25 | 4% |
+| ASSEMBLY | SELECT | 0 | 15 | 0% |
+| ASSEMBLY | POSITION | 0 | 2 | 0% |
+| MANAGE | ASSIGN | 0 | 1 | 0% |
+| MANAGE | RELEASE | 0 | 2 | 0% |
+| MANAGE | BOM | 0 | 2 | 0% |
+| MANAGE | PROCESS MANAGEMENT | 0 | 3 | 0% |
+| MANAGE | TASK MANAGEMENT | 0 | 3 | 0% |
+| UTILITIES | MODELING TOOLS | 0 | 1 | 0% |
+| UTILITIES | MAKE | 0 | 1 | 0% |
+| UTILITIES | NEST | 0 | 1 | 0% |
+| UTILITIES | ADD-INS | 0 | 2 | 0% |
+| UTILITIES | UTILITY | 1 | 3 | 33% |
+| UTILITIES | INSPECT | 1 | 24 | 4% |
+| UTILITIES | CREATE PMI | 0 | 4 | 0% |
+| UTILITIES | SELECT | 0 | 15 | 0% |
+| UTILITIES | POSITION | 0 | 2 | 0% |
+
+## Live (SOLID, SKETCH)
+
+- SOLID › CREATE › Create Sketch (`SketchCreate`)
+- SOLID › CREATE › Extrude (`Extrude`)
+- SOLID › CREATE › Revolve (`Revolve`)
+- SOLID › CREATE › Box (`PrimitiveBox`)
+- SOLID › CREATE › Cylinder (`PrimitiveCylinder`)
+- SOLID › CREATE › Sphere (`PrimitiveSphere`)
+- SOLID › CREATE › Torus (`PrimitiveTorus`)
+- SOLID › MODIFY › Fillet (`FusionFilletEdgesCommand`)
+- SOLID › MODIFY › Chamfer (`FusionChamferCommand`)
+- SOLID › MODIFY › Combine (`FusionCombineCommand`)
+- SOLID › MODIFY › Move/Copy (`FusionMoveCommand`)
+- SOLID › MODIFY › Delete (`FusionDeleteCommand`)
+- SOLID › MODIFY › Change Parameters (`ChangeParameterCommand`)
+- SOLID › MODIFY › Compute All (`FusionComputeAllCommand`)
+- SOLID › INSPECT › Measure (`MeasureCommand`)
+- SKETCH › CREATE › Line (`DrawPolyline`)
+- SKETCH › CREATE › 2-Point Rectangle (`ShapeRectangleTwoPoint`)
+- SKETCH › CREATE › 3-Point Rectangle (`ShapeRectangleThreePoint`)
+- SKETCH › CREATE › Center Rectangle (`ShapeRectangleCenter`)
+- SKETCH › CREATE › Center Diameter Circle (`CircleCenterRadius`)
+- SKETCH › CREATE › 2-Point Circle (`CircleTwoPoint`)
+- SKETCH › CREATE › 3-Point Circle (`CircleThreePoint`)
+- SKETCH › CREATE › 3-Point Arc (`ArcThreePoint`)
+- SKETCH › CREATE › Center Point Arc (`ArcCenterTwoPoint`)
+- SKETCH › CREATE › Circumscribed Polygon (`ShapePolygonCircumscribed`)
+- SKETCH › CREATE › Inscribed Polygon (`ShapePolygonInscribed`)
+- SKETCH › CREATE › Edge Polygon (`ShapePolygonEdge`)
+- SKETCH › CREATE › Center to Center Slot (`ShapeSlotCenterToCenter`)
+- SKETCH › CREATE › Overall Slot (`ShapeSlotOverall`)
+- SKETCH › CREATE › Point (`DrawPoint`)
+- SKETCH › CREATE › Sketch Dimension (`SketchDimension`)
+- SKETCH › MODIFY › Move/Copy (`FusionMoveCommand`)
+- SKETCH › MODIFY › Change Parameters (`ChangeParameterCommand`)
+- SKETCH › CONSTRAINTS › Horizontal/Vertical (`ConstraintHorizontalVertical`)
+- SKETCH › CONSTRAINTS › Coincident (`ConstraintCoincident`)
+- SKETCH › CONSTRAINTS › Tangent (`ConstraintTangent`)
+- SKETCH › CONSTRAINTS › Equal (`ConstraintEqual`)
+- SKETCH › CONSTRAINTS › Parallel (`ConstraintParallel`)
+- SKETCH › CONSTRAINTS › Perpendicular (`ConstraintPerpendicular`)
+- SKETCH › CONSTRAINTS › Fix/UnFix (`ConstraintFix`)
+- SKETCH › CONSTRAINTS › MidPoint (`ConstraintMidPoint`)
+- SKETCH › CONSTRAINTS › Concentric (`ConstraintConcentric`)
+- SKETCH › CONSTRAINTS › Collinear (`ConstraintCollinear`)
+- SKETCH › CONSTRAINTS › Symmetry (`ConstraintSymmetry`)
+- SKETCH › INSPECT › Measure (`MeasureCommand`)
+- SKETCH › FINISH SKETCH › Finish Sketch (`SketchStop`)
+
+## Not yet (SOLID, SKETCH)
+
+- SOLID › CREATE › Create Form (`TSplineBaseFeatureCreationCommand`)
+- SOLID › CREATE › Derive (`PushDeriveCommand`)
+- SOLID › CREATE › Automated Modeling (`AutomatedModelingCommand`)
+- SOLID › CREATE › Sweep (`Sweep`)
+- SOLID › CREATE › Loft (`SolidLoft`)
+- SOLID › CREATE › Rib (`FusionRibCommand`)
+- SOLID › CREATE › Web (`FusionWebCommand`)
+- SOLID › CREATE › Emboss (`EmbossCmd`)
+- SOLID › CREATE › Hole (`FusionHoleCommand`)
+- SOLID › CREATE › Thread (`FusionThreadCommand`)
+- SOLID › CREATE › Coil (`PrimitiveCoil`)
+- SOLID › CREATE › Pipe (`PrimitivePipe`)
+- SOLID › CREATE › Bounding Solid (`StockModelCommand`)
+- SOLID › CREATE › Rectangular Pattern (`PatternRectangular`)
+- SOLID › CREATE › Circular Pattern (`PatternCircular`)
+- SOLID › CREATE › Pattern on Path (`PatternOnPath`)
+- SOLID › CREATE › Geometric Pattern (`FusionPatternGeometricCommand`)
+- SOLID › CREATE › Mirror (`MirrorCommand`)
+- SOLID › CREATE › Thicken (`FusionSurfaceThickenCommand`)
+- SOLID › CREATE › Boundary Fill (`SurfaceSculpt`)
+- SOLID › CREATE › Find Features (`FusionFindFeaturesCommand`)
+- SOLID › CREATE › Fluid Volume (`EnclosureCommand`)
+- SOLID › CREATE › Create Base Feature (`BaseFeatureCreationCommand`)
+- SOLID › CREATE › Create Linked PCB (`PCBExternalComponentCreationCmd`)
+- SOLID › CREATE › Derive PCB (`PCBDeriveCmd`)
+- SOLID › CREATE › Create Unlinked PCB (`PCBCreateCmd`)
+- SOLID › CREATE › Joint Origin (`JointOrigin`)
+- SOLID › CREATE › Generate Timeline (`TimelineBuilderCommand`)
+- SOLID › MODIFY › Press Pull (`FusionPressPullCommand`)
+- SOLID › MODIFY › Edit Face (`EditFaceCommand`)
+- SOLID › MODIFY › Shell (`FusionShellBodyCommand`)
+- SOLID › MODIFY › Draft (`FusionDraftCommand`)
+- SOLID › MODIFY › Scale (`ModifyScale`)
+- SOLID › MODIFY › Offset Face (`FusionOffsetFacesCommand`)
+- SOLID › MODIFY › Replace Face (`FusionReplaceFaceCommand`)
+- SOLID › MODIFY › Split Face (`FusionSplitFaceCommand`)
+- SOLID › MODIFY › Split Body (`FusionSplitBodyCommand`)
+- SOLID › MODIFY › Silhouette Split (`FusionPartingLineSplitCmd`)
+- SOLID › MODIFY › Align (`AlignCmd`)
+- SOLID › MODIFY › Remove (`SoftDeleteCommand`)
+- SOLID › MODIFY › Arrange (`ArrangeCommand`)
+- SOLID › MODIFY › Remove Features (`FusionRemoveFeaturesCommand`)
+- SOLID › MODIFY › Remove Faces (`FusionRemoveFacesCommand`)
+- SOLID › MODIFY › Replace with Primitives (`ReplaceWithPrimitivesCommand`)
+- SOLID › MODIFY › Volumetric Lattice (`VolFieldCreateLatticeCommand`)
+- SOLID › MODIFY › Volumetric Texture (`VolFieldTextureCommand`)
+- SOLID › MODIFY › VolFieldModifyModelCommand (`VolFieldModifyModelCommand`)
+- SOLID › MODIFY › Physical Material (`PhysicalMaterialCommand`)
+- SOLID › MODIFY › Appearance (`AppearanceCommand`)
+- SOLID › MODIFY › Manage Materials (`MaterialCommand`)
+- SOLID › MODIFY › Compute Unresolved (`FusionComputeUnresolvedCommand`)
+- SOLID › MODIFY › Convert (`TSpline2BRepCommand`)
+- SOLID › MODIFY › Bill of Materials (`MaterializedBomHybridCmd`)
+- SOLID › ASSEMBLE › Insert Component (`FusionImportCommandFromToolbar`)
+- SOLID › ASSEMBLE › New Component (`FusionCreateNewComponentCommand`)
+- SOLID › ASSEMBLE › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
+- SOLID › ASSEMBLE › Constrain Components (`AssemblyMateCommand`)
+- SOLID › ASSEMBLE › Align Constraint (`AlignConstraintCmd`)
+- SOLID › ASSEMBLE › Angle Constraint (`AngleConstraintCmd`)
+- SOLID › ASSEMBLE › Center Constraint (`MidplaneConstraintCmd`)
+- SOLID › ASSEMBLE › Tangent Constraint (`TangentConstraintCmd`)
+- SOLID › ASSEMBLE › Joint Constraint (`JointConstraintCmd`)
+- SOLID › ASSEMBLE › Joint (`JointAssembleCmdNew`)
+- SOLID › ASSEMBLE › As-Built Joint (`JointAsBuiltCmd`)
+- SOLID › ASSEMBLE › As-Built Constraint (`AsBuiltConstraintCmd`)
+- SOLID › ASSEMBLE › Rigid Group (`RigidGroupCmd`)
+- SOLID › ASSEMBLE › Drive Joints (`FusionMoveJointsCommand`)
+- SOLID › ASSEMBLE › Motion Link (`FusionMotionRelationshipCommand`)
+- SOLID › ASSEMBLE › Motion Study (`FusionMotionStudyCommand`)
+- SOLID › ASSEMBLE › Enable Contact Sets (`EnableContactSetsCmd`)
+- SOLID › ASSEMBLE › Enable All Contact (`EnableAllContactCmd`)
+- SOLID › ASSEMBLE › Disable Contact (`DisableAllContactCmd`)
+- SOLID › ASSEMBLE › New Contact Set (`ContactSetCmd`)
+- SOLID › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)
+- SOLID › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)
+- SOLID › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)
+- SOLID › CONSTRUCT › User Coordinate System (UCS) (`CoordinateSystemCommand`)
+- SOLID › CONSTRUCT › Offset Plane (`ConstructionPlaneOffsetFromPlaneCommand`)
+- SOLID › CONSTRUCT › Plane at Angle (`ConstructionPlaneAtAngleCommand`)
+- SOLID › CONSTRUCT › Tangent Plane (`ConstructionTangentPlaneCommand`)
+- SOLID › CONSTRUCT › Midplane (`ConstructionMidPlaneCommand`)
+- SOLID › CONSTRUCT › Perpendicular Plane (`ConstructionPlanePerpendicularToPlaneCommand`)
+- SOLID › CONSTRUCT › Plane Through Two Edges (`ConstructionPlaneFromTwoEdgesCommand`)
+- SOLID › CONSTRUCT › Plane Through Three Points (`ConstructionPlaneFromThreePointsCommand`)
+- SOLID › CONSTRUCT › Plane Along Path (`ConstructionPlaneAlongPathCommand`)
+- SOLID › CONSTRUCT › Axis Through Cylinder/Cone/Torus (`ConstructionAxisThroughCylinderCommand`)
+- SOLID › CONSTRUCT › Axis Perpendicular To Face (`ConstructionAxisNormalToFaceCommand`)
+- SOLID › CONSTRUCT › Axis Through Two Planes (`ConstructionAxisFromTwoPlanesCommand`)
+- SOLID › CONSTRUCT › Axis Through Two Points (`ConstructionAxisThroughTwoPointsCommand`)
+- SOLID › CONSTRUCT › Axis Through Edge (`ConstructionAxisThroughEdgeCommand`)
+- SOLID › CONSTRUCT › Point At Vertex (`ConstructionPointFromPointCommand`)
+- SOLID › CONSTRUCT › Point Through Two Edges (`ConstructionPointThroughTwoEdgesCommand`)
+- SOLID › CONSTRUCT › Point Through Three Planes (`ConstructionPointFromThreePlanesCommand`)
+- SOLID › CONSTRUCT › Point At Center Of Circle/Sphere/Torus (`ConstructionPointFromCircleOrSphereCommand`)
+- SOLID › CONSTRUCT › Point At Edge And Plane (`ConstructionPointAtEdgeAndPlaneCommand`)
+- SOLID › CONSTRUCT › Point Along Path (`ConstructionPointAlongPathCommand`)
+- SOLID › INSPECT › Interference (`InterferenceCheckCommand`)
+- SOLID › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)
+- SOLID › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)
+- SOLID › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)
+- SOLID › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)
+- SOLID › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)
+- SOLID › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)
+- SOLID › INSPECT › Validate (`FusionSurfaceValidateCommand`)
+- SOLID › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)
+- SOLID › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)
+- SOLID › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)
+- SOLID › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)
+- SOLID › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)
+- SOLID › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)
+- SOLID › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)
+- SOLID › INSPECT › Fastener Stack Analysis (`FusionFastenerStackAnalysisCommand`)
+- SOLID › INSPECT › Find Similar Components (`SimilarPartsCommand`)
+- SOLID › INSPECT › Navigator (`GraphViewCmd`)
+- SOLID › INSPECT › Display Component Colors (`FusionViewColorCyclingToggleCmd`)
+- SOLID › INSPECT › Display Mesh Face Groups (`FacegroupsToggleCmd`)
+- SOLID › INSPECT › Assembly Statistics (`FusionAssemblyStatisticsCommand`)
+- SOLID › INSPECT › Change Summary (`ShowChangeAwarenessToolbarCmd`)
+- SOLID › INSPECT › History (`ShowHistoryToolbarCmd`)
+- SOLID › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)
+- SOLID › INSERT › Decal (`FusionAddEditDecalCommand`)
+- SOLID › INSERT › Canvas (`FusionAddCanvasCommand`)
+- SOLID › INSERT › Insert T-Spline (`TSplineImportCommand`)
+- SOLID › INSERT › Insert SVG (`SketchImportSVG`)
+- SOLID › INSERT › Insert DXF (`ImportDxfFileCommand`)
+- SOLID › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
+- SOLID › INSERT › Insert Fastener (`FusionFastenersCommand`)
+- SOLID › INSERT › Insert Derive (`PullDeriveCommand`)
+- SOLID › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)
+- SOLID › INSERT › Insert a manufacturer part (`cadenasparts4cad`)
+- SOLID › INSERT › Insert TraceParts Supplier Components (`traceparts_insert`)
+- SOLID › ASSEMBLE › Add To Assembly (`NewAssemblyFromPartCommand`)
+- SOLID › SELECT › Select (`SelectCommand`)
+- SOLID › SELECT › Window Selection (`selectWindow`)
+- SOLID › SELECT › Freeform Selection (`selectFreeForm`)
+- SOLID › SELECT › Paint Selection (`selectPaint`)
+- SOLID › SELECT › Select By Name (`SelectByNameCommand`)
+- SOLID › SELECT › Select By Boundary (`SelectByBoundaryCommand`)
+- SOLID › SELECT › Select By Size (`FusionSelectBodiesBySizeCommand`)
+- SOLID › SELECT › Invert Selection (`SelectByInvertCommand`)
+- SOLID › SELECT › Seed And Boundary (`FusionSelectSeedAndBoundaryFacesCommand`)
+- SOLID › SELECT › Component Drag (`FusionDragCompControlsCmd`)
+- SOLID › SELECT › Select Body Priority (`SelectBodyPriorityCommand`)
+- SOLID › SELECT › Select Face Priority (`SelectFacePriorityCommand`)
+- SOLID › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)
+- SOLID › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)
+- SOLID › SELECT › Selection Filters (`SelectionFilterCommand`)
+- SOLID › POSITION › Capture Position (`SnapshotCmd`)
+- SOLID › POSITION › Revert Position (`AsBuiltPositionsCmd`)
+- SKETCH › CREATE › Midpoint Line (`SketchMidpointLine`)
+- SKETCH › CREATE › SketchConstrainer (`SketchConstrainer`)
+- SKETCH › CREATE › 2-Tangent Circle (`CircleTanTanRadius`)
+- SKETCH › CREATE › 3-Tangent Circle (`CircleThreeTangent`)
+- SKETCH › CREATE › Tangent Arc (`ArcTangent`)
+- SKETCH › CREATE › Ellipse (`CircleElipse`)
+- SKETCH › CREATE › Center Point Slot (`ShapeSlotCenterPoint`)
+- SKETCH › CREATE › Three Point Arc Slot (`ShapeArcSlotThreePoint`)
+- SKETCH › CREATE › Center Point Arc Slot (`ShapeArcSlotCenterTwoPoint`)
+- SKETCH › CREATE › Fit Point Spline (`DrawSpline`)
+- SKETCH › CREATE › Control Point Spline (`DrawCVMSpline3D`)
+- SKETCH › CREATE › Control Point Spline (`DrawCVMSpline5D`)
+- SKETCH › CREATE › Conic Curve (`ConicCurveCmd`)
+- SKETCH › CREATE › Text (`MTextCmd`)
+- SKETCH › CREATE › Fit Curves to Mesh Section (`FitCurvesToSectionCommand`)
+- SKETCH › CREATE › Mirror (`MirrorSketchCommand`)
+- SKETCH › CREATE › Circular Pattern (`CircularSketchPatternCommand`)
+- SKETCH › CREATE › Rectangular Pattern (`RectangularSketchPatternCommand`)
+- SKETCH › CREATE › Project (`ProjectNewCmd`)
+- SKETCH › CREATE › Intersect (`IntersectCmd`)
+- SKETCH › CREATE › Spun Profile (`SpunProfileCmd`)
+- SKETCH › CREATE › Include 3D Geometry (`Include3DGeometry`)
+- SKETCH › CREATE › Project To Surface (`ProjectToSurface`)
+- SKETCH › CREATE › Intersection Curve (`IntersectionCurve`)
+- SKETCH › CREATE › Isoparametric Curve (`SketchIsoparametricCurve`)
+- SKETCH › MODIFY › Fillet (`FilletSketchCmd`)
+- SKETCH › MODIFY › Equal Distance Chamfer (`ChamferSketchEqualDistance`)
+- SKETCH › MODIFY › Distance and Angle Chamfer (`ChamferSketchDistanceAngle`)
+- SKETCH › MODIFY › Two Distance Chamfer (`ChamferSketchDistanceDistance`)
+- SKETCH › MODIFY › Blend Curve (`BlendG1CurveSketchCmd`)
+- SKETCH › MODIFY › Offset (`Offset`)
+- SKETCH › MODIFY › Trim (`TrimSketchCmd`)
+- SKETCH › MODIFY › Extend (`ExtendSketchCmd`)
+- SKETCH › MODIFY › Break (`BreakSketchCmd`)
+- SKETCH › MODIFY › Sketch Scale (`SketchScaleCmd`)
+- SKETCH › CONSTRAINTS › AutoConstrain (`SketchAutoConstraintAndDimCmd`)
+- SKETCH › CONSTRAINTS › AutoConstrain from datum (`SketchAutoConstraintAndDimFromDatumCmd`)
+- SKETCH › CONSTRAINTS › Curvature (`ConstraintSmooth`)
+- SKETCH › CONSTRAINTS › Polygon (`SketchPolygonConstraintCmd`)
+- SKETCH › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)
+- SKETCH › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)
+- SKETCH › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)
+- SKETCH › INSPECT › Interference (`InterferenceCheckCommand`)
+- SKETCH › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)
+- SKETCH › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)
+- SKETCH › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)
+- SKETCH › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)
+- SKETCH › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)
+- SKETCH › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)
+- SKETCH › INSPECT › Validate (`FusionSurfaceValidateCommand`)
+- SKETCH › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)
+- SKETCH › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)
+- SKETCH › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)
+- SKETCH › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)
+- SKETCH › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)
+- SKETCH › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)
+- SKETCH › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)
+- SKETCH › INSPECT › Fastener Stack Analysis (`FusionFastenerStackAnalysisCommand`)
+- SKETCH › INSPECT › Find Similar Components (`SimilarPartsCommand`)
+- SKETCH › INSPECT › Navigator (`GraphViewCmd`)
+- SKETCH › INSPECT › Display Component Colors (`FusionViewColorCyclingToggleCmd`)
+- SKETCH › INSPECT › Display Mesh Face Groups (`FacegroupsToggleCmd`)
+- SKETCH › INSPECT › Assembly Statistics (`FusionAssemblyStatisticsCommand`)
+- SKETCH › INSPECT › Change Summary (`ShowChangeAwarenessToolbarCmd`)
+- SKETCH › INSPECT › History (`ShowHistoryToolbarCmd`)
+- SKETCH › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)
+- SKETCH › INSERT › Decal (`FusionAddEditDecalCommand`)
+- SKETCH › INSERT › Canvas (`FusionAddCanvasCommand`)
+- SKETCH › INSERT › Insert T-Spline (`TSplineImportCommand`)
+- SKETCH › INSERT › Insert SVG (`SketchImportSVG`)
+- SKETCH › INSERT › Insert DXF (`ImportDxfFileCommand`)
+- SKETCH › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
+- SKETCH › INSERT › Insert Component (`FusionImportCommandFromToolbar`)
+- SKETCH › INSERT › Insert Fastener (`FusionFastenersCommand`)
+- SKETCH › INSERT › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
+- SKETCH › INSERT › Insert Derive (`PullDeriveCommand`)
+- SKETCH › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)
+- SKETCH › INSERT › Insert a manufacturer part (`cadenasparts4cad`)
+- SKETCH › INSERT › Insert TraceParts Supplier Components (`traceparts_insert`)
+- SKETCH › ASSEMBLE › Add To Assembly (`NewAssemblyFromPartCommand`)
+- SKETCH › SELECT › Select (`SelectCommand`)
+- SKETCH › SELECT › Window Selection (`selectWindow`)
+- SKETCH › SELECT › Freeform Selection (`selectFreeForm`)
+- SKETCH › SELECT › Paint Selection (`selectPaint`)
+- SKETCH › SELECT › Select By Name (`SelectByNameCommand`)
+- SKETCH › SELECT › Select By Boundary (`SelectByBoundaryCommand`)
+- SKETCH › SELECT › Select By Size (`FusionSelectBodiesBySizeCommand`)
+- SKETCH › SELECT › Invert Selection (`SelectByInvertCommand`)
+- SKETCH › SELECT › Seed And Boundary (`FusionSelectSeedAndBoundaryFacesCommand`)
+- SKETCH › SELECT › Component Drag (`FusionDragCompControlsCmd`)
+- SKETCH › SELECT › Select Body Priority (`SelectBodyPriorityCommand`)
+- SKETCH › SELECT › Select Face Priority (`SelectFacePriorityCommand`)
+- SKETCH › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)
+- SKETCH › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)
+- SKETCH › SELECT › Selection Filters (`SelectionFilterCommand`)
+- SKETCH › FINISH SKETCH › Finish with AutoConstrain (`SketchAutoConstrainAndFinish`)

xtask/src/assets.rs

@@ -0,0 +1,39 @@
+//! `cargo xtask assets`: every non-code asset in the repository must have a row in
+//! ATTRIBUTION.md (author, source, licence). Icons are drawn in code and need no file.
+
+use std::path::Path;
+
+const ASSET_EXT: &[&str] = &["png", "jpg", "jpeg", "svg", "ico", "icns", "ttf", "otf", "woff", "woff2", "gif", "bmp", "webp", "wav", "mp3", "stl", "step", "stp", "obj"];
+const SKIP_DIRS: &[&str] = &["target", ".git", "plan", "dist"];
+
+fn walk(dir: &Path, root: &Path, out: &mut Vec<String>) {
+    let Ok(rd) = std::fs::read_dir(dir) else { return };
+    for e in rd.flatten() {
+        let p = e.path();
+        let name = e.file_name().to_string_lossy().to_string();
+        if p.is_dir() {
+            if !SKIP_DIRS.contains(&name.as_str()) && !name.starts_with('.') {
+                walk(&p, root, out);
+            }
+        } else if let Some(ext) = p.extension().map(|x| x.to_string_lossy().to_ascii_lowercase())
+            && ASSET_EXT.contains(&ext.as_str())
+            && let Ok(rel) = p.strip_prefix(root)
+        {
+            out.push(rel.to_string_lossy().replace('\\', "/"));
+        }
+    }
+}
+
+pub fn run(root: &Path) -> Result<(), String> {
+    let attribution = std::fs::read_to_string(root.join("ATTRIBUTION.md")).map_err(|e| format!("ATTRIBUTION.md: {e}"))?;
+    let mut files = Vec::new();
+    walk(root, root, &mut files);
+    files.sort();
+    let missing: Vec<&String> = files.iter().filter(|f| !attribution.contains(f.as_str())).collect();
+    if missing.is_empty() {
+        println!("assets: {} asset file(s), all attributed", files.len());
+        Ok(())
+    } else {
+        Err(format!("assets missing from ATTRIBUTION.md:\n{}", missing.iter().map(|m| format!("  {m}")).collect::<Vec<_>>().join("\n")))
+    }
+}

xtask/src/layers.rs

@@ -0,0 +1,321 @@
+//! Dependency layering rules (plan/architecture.md §3).
+//!
+//! Adapted from CADCraft's xtask (MIT OR Apache-2.0), see ATTRIBUTION.md.
+//!
+//! The rule engine works on a small, metadata-independent model so it can be
+//! unit-tested; `from_metadata` builds that model from `cargo metadata`.
+
+use serde_json::Value;
+
+/// Where a workspace crate sits.
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum Class {
+    /// Regular layered crate.
+    Layer(u8),
+    /// Layer 0, and additionally may depend on no workspace crate at all.
+    Standalone,
+    /// Test tooling: may depend on anything up to L5 (it sits at L6 for rule
+    /// purposes); other crates may use it only as a dev-dependency.
+    Testkit,
+    /// Binaries and build tooling: exempt from the rules.
+    Exempt,
+}
+
+impl Class {
+    fn layer(self) -> Option<u8> {
+        match self {
+            Class::Layer(l) => Some(l),
+            Class::Standalone => Some(0),
+            Class::Testkit => Some(6),
+            Class::Exempt => None,
+        }
+    }
+}
+
+/// The layering table. Names are package names without the `solvecraft-`
+/// prefix.
+pub const TABLE: &[(&str, Class)] = &[
+    ("geom", Class::Layer(0)),
+    ("sketch", Class::Layer(1)),
+    ("kernel", Class::Layer(1)),
+    ("render", Class::Layer(1)),
+    ("doc", Class::Layer(2)),
+    ("io", Class::Layer(3)),
+    ("engine", Class::Layer(4)),
+    ("ui-egui", Class::Layer(5)),
+    ("testkit", Class::Testkit),
+    // apps and tooling
+    ("solvecraft", Class::Exempt),
+    ("cli", Class::Exempt),
+    ("xtask", Class::Exempt),
+];
+
+/// Explicit orderings *within* a layer (earlier may be used by later).
+pub const INTRA_LAYER_ORDER: &[&[&str]] = &[];
+
+fn intra_layer_allowed(from: &str, to: &str) -> bool {
+    let (from, to) = (short_name(from), short_name(to));
+    INTRA_LAYER_ORDER.iter().any(|chain| match (chain.iter().position(|n| *n == from), chain.iter().position(|n| *n == to)) {
+        (Some(f), Some(t)) => t < f,
+        _ => false,
+    })
+}
+
+/// External crates that constitute a UI toolkit / windowing dependency.
+/// Entries ending in `*` are prefixes.
+pub const UI_CRATES: &[&str] = &["egui", "eframe", "egui-wgpu", "wgpu", "winit", "egui_kittest", "rfd", "bevy*"];
+
+/// First layer allowed to use UI crates.
+pub const UI_MIN_LAYER: u8 = 5;
+
+pub fn short_name(pkg: &str) -> &str {
+    pkg.strip_prefix("solvecraft-").unwrap_or(pkg)
+}
+
+pub fn classify(pkg: &str) -> Option<Class> {
+    let s = short_name(pkg);
+    TABLE.iter().find(|(n, _)| *n == s).map(|(_, c)| *c)
+}
+
+fn is_ui_crate(name: &str) -> bool {
+    UI_CRATES.iter().any(|p| match p.strip_suffix('*') {
+        Some(prefix) => name.starts_with(prefix),
+        None => name == *p,
+    })
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum DepKind {
+    Normal,
+    Dev,
+    Build,
+}
+
+#[derive(Debug, Clone)]
+pub struct Dep {
+    pub name: String,
+    pub kind: DepKind,
+    /// `true` if the dependency is a workspace member.
+    pub workspace: bool,
+}
+
+#[derive(Debug, Clone)]
+pub struct Crate {
+    pub name: String,
+    pub deps: Vec<Dep>,
+}
+
+#[derive(Debug, Clone, PartialEq, Eq)]
+pub enum Violation {
+    Unregistered { krate: String },
+    Upward { krate: String, dep: String, from: u8, to: u8, kind: DepKind },
+    StandaloneHasWorkspaceDep { krate: String, dep: String },
+    TestkitAsNormalDep { krate: String },
+    UiBelowL5 { krate: String, dep: String, layer: u8 },
+}
+
+impl std::fmt::Display for Violation {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        match self {
+            Violation::Unregistered { krate } => {
+                write!(f, "{krate}: unknown workspace crate; register it in xtask/src/layers.rs TABLE (see plan/architecture.md §3)")
+            }
+            Violation::Upward { krate, dep, from, to, kind } => {
+                write!(f, "{krate} (L{from}) -> {dep} (L{to}) [{kind:?}]: may only depend on strictly lower layers")
+            }
+            Violation::StandaloneHasWorkspaceDep { krate, dep } => {
+                write!(f, "{krate}: standalone crate must not depend on workspace crate {dep}")
+            }
+            Violation::TestkitAsNormalDep { krate } => {
+                write!(f, "{krate}: solvecraft-testkit may only be a dev-dependency")
+            }
+            Violation::UiBelowL5 { krate, dep, layer } => {
+                write!(f, "{krate} (L{layer}) depends on UI crate `{dep}`; UI toolkits are only allowed in L5+")
+            }
+        }
+    }
+}
+
+/// Check all rules. Returns violations sorted for stable output.
+pub fn check(crates: &[Crate]) -> Vec<Violation> {
+    let mut out = Vec::new();
+    for c in crates {
+        let Some(class) = classify(&c.name) else {
+            out.push(Violation::Unregistered { krate: c.name.clone() });
+            continue;
+        };
+        if class == Class::Exempt {
+            continue;
+        }
+        let layer = class.layer().unwrap_or(0);
+        for d in &c.deps {
+            // Self dev-dependencies (e.g. to enable features in tests) are fine.
+            if d.name == c.name {
+                continue;
+            }
+            if d.workspace {
+                if class == Class::Standalone {
+                    out.push(Violation::StandaloneHasWorkspaceDep { krate: c.name.clone(), dep: d.name.clone() });
+                    continue;
+                }
+                match classify(&d.name) {
+                    // Unregistered deps are reported on their own entry.
+                    None => {}
+                    Some(Class::Testkit) => {
+                        if d.kind != DepKind::Dev {
+                            out.push(Violation::TestkitAsNormalDep { krate: c.name.clone() });
+                        }
+                    }
+                    Some(dc) => {
+                        let to = dc.layer().unwrap_or(u8::MAX);
+                        if to >= layer && !(to == layer && intra_layer_allowed(&c.name, &d.name)) {
+                            out.push(Violation::Upward {
+                                krate: c.name.clone(),
+                                dep: d.name.clone(),
+                                from: layer,
+                                to: if to == u8::MAX { 7 } else { to },
+                                kind: d.kind,
+                            });
+                        }
+                    }
+                }
+            } else if layer < UI_MIN_LAYER && is_ui_crate(&d.name) {
+                out.push(Violation::UiBelowL5 { krate: c.name.clone(), dep: d.name.clone(), layer });
+            }
+        }
+    }
+    out.sort_by_key(|v| v.to_string());
+    out.dedup();
+    out
+}
+
+/// Build the model from `cargo metadata --format-version 1 --no-deps`.
+pub fn from_metadata(meta: &Value) -> Result<Vec<Crate>, String> {
+    let pkgs = meta["packages"].as_array().ok_or("metadata: no packages array")?;
+    let members: Vec<&str> = pkgs.iter().filter_map(|p| p["name"].as_str()).collect();
+    let mut out = Vec::new();
+    for p in pkgs {
+        let name = p["name"].as_str().ok_or("package without name")?.to_owned();
+        let mut deps = Vec::new();
+        for d in p["dependencies"].as_array().into_iter().flatten() {
+            let dname = d["name"].as_str().unwrap_or_default().to_owned();
+            let kind = match d["kind"].as_str() {
+                Some("dev") => DepKind::Dev,
+                Some("build") => DepKind::Build,
+                _ => DepKind::Normal,
+            };
+            let workspace = members.contains(&dname.as_str()) || d["path"].is_string();
+            deps.push(Dep { name: dname, kind, workspace });
+        }
+        out.push(Crate { name, deps });
+    }
+    out.sort_by(|a, b| a.name.cmp(&b.name));
+    Ok(out)
+}
+
+pub fn describe(class: Option<Class>) -> String {
+    match class {
+        Some(Class::Layer(l)) => format!("L{l}"),
+        Some(Class::Standalone) => "L0 standalone".into(),
+        Some(Class::Testkit) => "testkit".into(),
+        Some(Class::Exempt) => "exempt".into(),
+        None => "UNREGISTERED".into(),
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    fn c(name: &str, deps: &[(&str, DepKind, bool)]) -> Crate {
+        Crate { name: name.into(), deps: deps.iter().map(|(n, k, w)| Dep { name: (*n).into(), kind: *k, workspace: *w }).collect() }
+    }
+    use DepKind::*;
+
+    #[test]
+    fn clean_downward_graph_passes() {
+        let g = [
+            c("solvecraft-geom", &[("kurbo", Normal, false)]),
+            c("solvecraft-doc", &[("solvecraft-geom", Normal, true)]),
+            c("solvecraft-engine", &[("solvecraft-doc", Normal, true), ("solvecraft-testkit", Dev, true)]),
+            c("solvecraft-ui-egui", &[("solvecraft-engine", Normal, true), ("egui", Normal, false)]),
+            c("solvecraft-cli", &[("solvecraft-ui-egui", Normal, true)]),
+        ];
+        assert!(check(&g).is_empty(), "{:?}", check(&g));
+    }
+
+    #[test]
+    fn upward_dependency_flagged() {
+        let v = check(&[c("solvecraft-doc", &[("solvecraft-engine", Normal, true)])]);
+        assert!(matches!(v[..], [Violation::Upward { from: 2, to: 4, .. }]));
+    }
+
+    #[test]
+    fn sideways_dependency_flagged() {
+        let v = check(&[c("solvecraft-kernel", &[("solvecraft-sketch", Normal, true)])]);
+        assert!(matches!(v[..], [Violation::Upward { from: 1, to: 1, .. }]));
+    }
+
+    #[test]
+    fn self_dev_dependency_ignored() {
+        assert!(check(&[c("solvecraft-doc", &[("solvecraft-doc", Dev, true)])]).is_empty());
+    }
+
+    #[test]
+    fn upward_dev_dependency_flagged() {
+        let v = check(&[c("solvecraft-geom", &[("solvecraft-doc", Dev, true)])]);
+        assert!(matches!(v[..], [Violation::Upward { kind: Dev, .. }]));
+    }
+
+    #[test]
+    fn ui_crates_below_l6_flagged() {
+        for dep in ["egui", "eframe", "winit", "egui_kittest", "rfd", "bevy_ecs", "bevy"] {
+            let v = check(&[c("solvecraft-engine", &[(dep, Normal, false)])]);
+            assert!(matches!(v[..], [Violation::UiBelowL5 { layer: 4, .. }]), "{dep}");
+        }
+        assert!(check(&[c("solvecraft-engine", &[("egui_extras_not", Normal, false)])]).is_empty());
+        assert!(check(&[c("solvecraft-ui-egui", &[("winit", Normal, false)])]).is_empty());
+    }
+
+    #[test]
+    fn unregistered_crate_is_error() {
+        let v = check(&[c("solvecraft-mystery", &[])]);
+        assert!(matches!(&v[..], [Violation::Unregistered { krate }] if krate == "solvecraft-mystery"));
+        assert!(v[0].to_string().contains("register"));
+    }
+
+    #[test]
+    fn testkit_only_as_dev_dependency() {
+        let v = check(&[c("solvecraft-doc", &[("solvecraft-testkit", Normal, true)])]);
+        assert!(matches!(v[..], [Violation::TestkitAsNormalDep { .. }]));
+        assert!(check(&[c("solvecraft-doc", &[("solvecraft-testkit", Dev, true)])]).is_empty());
+        assert!(check(&[c("solvecraft-testkit", &[("solvecraft-engine", Normal, true)])]).is_empty());
+    }
+
+    #[test]
+    fn apps_and_xtask_exempt() {
+        for app in ["solvecraft", "solvecraft-cli", "xtask"] {
+            assert!(check(&[c(app, &[("egui", Normal, false), ("solvecraft-ui-egui", Normal, true)])]).is_empty());
+        }
+    }
+
+    #[test]
+    fn metadata_parsing() {
+        let meta: Value = serde_json::from_str(
+            r#"{"packages":[
+                {"name":"solvecraft-doc","dependencies":[
+                    {"name":"solvecraft-geom","kind":null,"path":"/x/crates/geom"},
+                    {"name":"serde","kind":null},
+                    {"name":"proptest","kind":"dev"}]},
+                {"name":"solvecraft-geom","dependencies":[]}
+            ]}"#,
+        )
+        .unwrap();
+        let g = from_metadata(&meta).unwrap();
+        assert_eq!(g.len(), 2);
+        let doc = g.iter().find(|c| c.name == "solvecraft-doc").unwrap();
+        assert!(doc.deps[0].workspace && !doc.deps[1].workspace);
+        assert_eq!(doc.deps[2].kind, Dev);
+        assert!(check(&g).is_empty());
+    }
+}

xtask/src/main.rs

@@ -1 +1,177 @@
-fn main() {}
+//! Workspace tooling: `cargo xtask <command>`.
+//!
+//! Pure Rust (std + serde_json). External tools (`cargo`) are invoked through
+//! `std::process::Command`.
+
+mod assets;
+mod layers;
+mod parity;
+
+use std::path::{Path, PathBuf};
+use std::process::{Command, ExitCode};
+
+const USAGE: &str = "\
+usage: cargo xtask <command>
+
+commands:
+  layers          enforce the crate dependency layering (plan/architecture.md §3)
+  assets          check that every non-code asset file is attributed in ATTRIBUTION.md
+  parity [--refresh]
+                  recompute Fusion command parity in docs/parity.md (--refresh rebuilds
+                  xtask/data/fusion-catalog.tsv from plan/fusion/menu-tree.json)
+  oracle          replay plan/fusion/oracle/*/recipe.json and compare with measure.json;
+                  writes docs/oracle.md
+  ci              fmt --check, clippy -D warnings, test, assets, layers (stops at first failure)
+";
+
+fn main() -> ExitCode {
+    let args: Vec<String> = std::env::args().skip(1).collect();
+    let rest: Vec<&str> = args.iter().skip(1).map(String::as_str).collect();
+    let result = match args.first().map(String::as_str) {
+        Some("layers") => cmd_layers(),
+        Some("assets") => assets::run(&root()),
+        Some("parity") => parity::run(&root(), rest.contains(&"--refresh")),
+        Some("oracle") => cmd_oracle(),
+        Some("ci") => cmd_ci(),
+        Some("-h" | "--help" | "help") | None => {
+            print!("{USAGE}");
+            Ok(())
+        }
+        Some(other) => Err(format!("unknown command `{other}`\n\n{USAGE}")),
+    };
+    match result {
+        Ok(()) => ExitCode::SUCCESS,
+        Err(e) => {
+            eprintln!("error: {e}");
+            ExitCode::FAILURE
+        }
+    }
+}
+
+/// Workspace root (parent of the xtask crate).
+pub fn root() -> PathBuf {
+    let here = Path::new(env!("CARGO_MANIFEST_DIR"));
+    here.parent().unwrap_or(here).to_path_buf()
+}
+
+pub fn cargo() -> Command {
+    let mut c = Command::new(std::env::var("CARGO").unwrap_or_else(|_| "cargo".into()));
+    c.current_dir(root());
+    c
+}
+
+fn run(mut cmd: Command, what: &str) -> Result<(), String> {
+    eprintln!("$ {what}");
+    let status = cmd.status().map_err(|e| format!("{what}: failed to spawn: {e}"))?;
+    if status.success() { Ok(()) } else { Err(format!("{what}: exited with {status}")) }
+}
+
+pub fn metadata() -> Result<serde_json::Value, String> {
+    let out = cargo().args(["metadata", "--format-version", "1", "--no-deps"]).output().map_err(|e| format!("cargo metadata: {e}"))?;
+    if !out.status.success() {
+        return Err(format!("cargo metadata failed:\n{}", String::from_utf8_lossy(&out.stderr)));
+    }
+    serde_json::from_slice(&out.stdout).map_err(|e| format!("cargo metadata: bad JSON: {e}"))
+}
+
+fn cmd_layers() -> Result<(), String> {
+    let crates = layers::from_metadata(&metadata()?)?;
+    println!("Dependency layering (plan/architecture.md §3)\n");
+    println!("{:<28} {:<14} workspace deps", "crate", "layer");
+    for c in &crates {
+        let ws: Vec<String> = c
+            .deps
+            .iter()
+            .filter(|d| d.workspace)
+            .map(|d| {
+                let k = match d.kind {
+                    layers::DepKind::Normal => "",
+                    layers::DepKind::Dev => " (dev)",
+                    layers::DepKind::Build => " (build)",
+                };
+                format!("{}{k}", layers::short_name(&d.name))
+            })
+            .collect();
+        println!("{:<28} {:<14} {}", c.name, layers::describe(layers::classify(&c.name)), ws.join(", "));
+    }
+    let violations = layers::check(&crates);
+    println!();
+    if violations.is_empty() {
+        println!("OK: {} crates, no layering violations.", crates.len());
+        Ok(())
+    } else {
+        println!("{} violation(s):", violations.len());
+        for v in &violations {
+            println!("  - {v}");
+        }
+        Err(format!("{} layering violation(s)", violations.len()))
+    }
+}
+
+/// Run the CLI's oracle replay over every case directory and write docs/oracle.md.
+fn cmd_oracle() -> Result<(), String> {
+    let dir = root().join("plan/fusion/oracle");
+    let mut cases: Vec<PathBuf> = std::fs::read_dir(&dir)
+        .map_err(|e| format!("{}: {e} (the oracle data is local, in plan/fusion/oracle)", dir.display()))?
+        .flatten()
+        .map(|e| e.path())
+        .filter(|p| p.join("recipe.json").is_file() && p.join("measure.json").is_file())
+        .collect();
+    cases.sort();
+    if cases.is_empty() {
+        return Err("no oracle cases with recipe.json and measure.json".into());
+    }
+    let mut cmd = cargo();
+    cmd.args(["run", "-q", "--release", "-p", "solvecraft-cli", "--", "oracle", "--json"]);
+    for c in &cases {
+        cmd.arg(c);
+    }
+    let out = cmd.output().map_err(|e| format!("solvecraft-cli: {e}"))?;
+    let results: serde_json::Value = serde_json::from_slice(&out.stdout).map_err(|e| format!("oracle JSON: {e}\n{}", String::from_utf8_lossy(&out.stderr)))?;
+    let list = results.as_array().cloned().unwrap_or_default();
+    let pass = list.iter().filter(|r| r["pass"].as_bool().unwrap_or(false)).count();
+    let skipped = list.iter().filter(|r| r["skipped"].as_bool().unwrap_or(false)).count();
+    let mut md = format!(
+        "# Fusion oracle\n\nGenerated by `cargo xtask oracle`. Each case is a part built in Fusion (recipe and measurements kept locally in `plan/fusion/oracle/`, not committed). SolveCraft replays the recipe through its command engine and compares body count, volume and area (relative tolerance 1e-3) and face/edge/vertex counts (exact).\n\n**{pass} / {} cases pass** ({skipped} need features not implemented yet).\n\n| Case | Result | Notes |\n|---|---|---|\n",
+        list.len()
+    );
+    for r in &list {
+        let status = if r["pass"].as_bool().unwrap_or(false) {
+            "pass"
+        } else if r["skipped"].as_bool().unwrap_or(false) {
+            "not yet"
+        } else {
+            "FAIL"
+        };
+        let mut notes: Vec<String> = r["checks"]
+            .as_array()
+            .into_iter()
+            .flatten()
+            .filter(|c| !c["ok"].as_bool().unwrap_or(false))
+            .map(|c| format!("{}: got {} want {}", c["check"].as_str().unwrap_or(""), c["got"], c["want"]))
+            .collect();
+        if let Some(e) = r["error"].as_str() {
+            notes.push(e.replace('|', "/"));
+        }
+        md += &format!("| {} | {status} | {} |\n", r["case"].as_str().unwrap_or(""), notes.join("; "));
+    }
+    std::fs::write(root().join("docs/oracle.md"), md).map_err(|e| format!("docs/oracle.md: {e}"))?;
+    println!("oracle: {pass}/{} cases pass ({skipped} not yet supported) → docs/oracle.md", list.len());
+    Ok(())
+}
+
+fn cmd_ci() -> Result<(), String> {
+    let mut c = cargo();
+    c.args(["fmt", "--all", "--", "--check"]);
+    run(c, "cargo fmt --check")?;
+    let mut c = cargo();
+    c.args(["clippy", "--workspace", "--all-targets", "--release", "--", "-D", "warnings"]);
+    run(c, "cargo clippy -D warnings")?;
+    let mut c = cargo();
+    c.args(["test", "--workspace", "--release"]);
+    run(c, "cargo test")?;
+    assets::run(&root())?;
+    cmd_layers()?;
+    eprintln!("ci: all gates passed");
+    Ok(())
+}

xtask/src/parity.rs

@@ -0,0 +1,173 @@
+//! `cargo xtask parity`: Fusion Design-workspace command parity.
+//!
+//! `xtask/data/fusion-catalog.tsv` lists the toolbar commands of Fusion's Design workspace as
+//! `tab \t panel \t command id \t command name` (ids and names only, nothing else). It is
+//! derived from the local, uncommitted `plan/fusion/menu-tree.json` with `--refresh`. A catalog
+//! entry is live when SolveCraft registers a command with the same id.
+
+use std::path::Path;
+use std::process::Command;
+
+use serde_json::Value;
+
+/// Design workspace tabs in the catalog (menu-tree tab id, display name).
+const TABS: &[(&str, &str)] = &[
+    ("SolidTab", "SOLID"),
+    ("SketchTab", "SKETCH"),
+    ("SurfaceTab", "SURFACE"),
+    ("ParaMeshOuterTab", "MESH"),
+    ("FormTab", "FORM"),
+    ("SheetMetalTab", "SHEET METAL"),
+    ("PlasticTab", "PLASTIC"),
+    ("AssemblyTab", "ASSEMBLY"),
+    ("ManageTab", "MANAGE"),
+    ("ToolsTab", "UTILITIES"),
+];
+
+/// The tabs the headline number counts (M0 scope).
+const HEADLINE: &[&str] = &["SOLID", "SKETCH"];
+
+#[derive(Clone, Debug)]
+pub struct Entry {
+    pub tab: String,
+    pub panel: String,
+    pub id: String,
+    pub name: String,
+}
+
+fn clean(s: &str) -> String {
+    s.replace(['\t', '\n', '\r'], " ").trim().to_string()
+}
+
+fn walk(controls: &[Value], defs: &[Value], tab: &str, panel: &str, out: &mut Vec<Entry>) {
+    for c in controls {
+        match c["type"].as_str() {
+            Some("CommandControl") => {
+                let id = c["command"]["id"].as_str().or(c["id"].as_str()).unwrap_or("");
+                if id.is_empty() {
+                    continue;
+                }
+                let name = c["command"]["name"]
+                    .as_str()
+                    .filter(|n| !n.is_empty())
+                    .or_else(|| defs.iter().find(|d| d["id"].as_str() == Some(id)).and_then(|d| d["name"].as_str()))
+                    .unwrap_or(id);
+                if !out.iter().any(|e| e.tab == tab && e.id == id) {
+                    out.push(Entry { tab: tab.into(), panel: panel.into(), id: clean(id), name: clean(name) });
+                }
+            }
+            Some("DropDownControl") => walk(c["controls"].as_array().map(Vec::as_slice).unwrap_or(&[]), defs, tab, panel, out),
+            _ => {}
+        }
+    }
+}
+
+/// Catalog entries from Fusion's menu-tree JSON.
+pub fn from_menu_tree(v: &Value) -> Vec<Entry> {
+    let defs = v["commandDefinitions"].as_array().map(Vec::as_slice).unwrap_or(&[]);
+    let mut out = Vec::new();
+    for (tid, tname) in TABS {
+        let tab = &v["tabs"][format!("DesignProductType/{tid}")];
+        for p in tab["panels"].as_array().into_iter().flatten() {
+            let panel = clean(p["name"].as_str().unwrap_or("")).to_uppercase();
+            walk(p["controls"].as_array().map(Vec::as_slice).unwrap_or(&[]), defs, tname, &panel, &mut out);
+        }
+    }
+    out
+}
+
+pub fn parse_catalog(s: &str) -> Vec<Entry> {
+    s.lines()
+        .filter(|l| !l.starts_with('#') && !l.trim().is_empty())
+        .filter_map(|l| {
+            let mut it = l.split('\t');
+            Some(Entry { tab: it.next()?.into(), panel: it.next()?.into(), id: it.next()?.into(), name: it.next().unwrap_or("").into() })
+        })
+        .collect()
+}
+
+pub fn run(root: &Path, refresh: bool) -> Result<(), String> {
+    let cat_path = root.join("xtask/data/fusion-catalog.tsv");
+    if refresh {
+        let mt = root.join("plan/fusion/menu-tree.json");
+        let s = std::fs::read_to_string(&mt).map_err(|e| format!("{}: {e}", mt.display()))?;
+        let v: Value = serde_json::from_str(&s).map_err(|e| format!("menu-tree.json: {e}"))?;
+        let entries = from_menu_tree(&v);
+        let mut out = String::from("# Fusion Design workspace toolbar: tab, panel, command id, command name (ids and names only).\n# Regenerate with `cargo xtask parity --refresh` (needs the local plan/fusion/menu-tree.json).\n");
+        for e in &entries {
+            out += &format!("{}\t{}\t{}\t{}\n", e.tab, e.panel, e.id, e.name);
+        }
+        std::fs::create_dir_all(root.join("xtask/data")).map_err(|e| e.to_string())?;
+        std::fs::write(&cat_path, out).map_err(|e| format!("{}: {e}", cat_path.display()))?;
+        println!("parity: catalog refreshed with {} entries", entries.len());
+    }
+    let catalog = parse_catalog(&std::fs::read_to_string(&cat_path).map_err(|e| format!("{}: {e}", cat_path.display()))?);
+    let out = Command::new(std::env::var("CARGO").unwrap_or_else(|_| "cargo".into()))
+        .current_dir(root)
+        .args(["run", "-q", "--release", "-p", "solvecraft-cli", "--", "commands"])
+        .output()
+        .map_err(|e| format!("solvecraft-cli: {e}"))?;
+    let cmds: Value = serde_json::from_slice(&out.stdout).map_err(|e| format!("commands JSON: {e}"))?;
+    let ids: Vec<String> = cmds.as_array().into_iter().flatten().filter_map(|c| c["id"].as_str().map(str::to_string)).collect();
+    let live = |e: &Entry| ids.iter().any(|i| *i == e.id);
+    let pct = |a: usize, b: usize| if b == 0 { 0.0 } else { 100.0 * a as f64 / b as f64 };
+
+    let head: Vec<&Entry> = catalog.iter().filter(|e| HEADLINE.contains(&e.tab.as_str())).collect();
+    let head_live = head.iter().filter(|e| live(e)).count();
+    let all_live = catalog.iter().filter(|e| live(e)).count();
+    let mut md = format!(
+        "# Fusion command parity\n\nGenerated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.\n\n**SOLID + SKETCH: {head_live} / {} commands live ({:.0}%).** All Design tabs: {all_live} / {} ({:.0}%). Registered commands: {}.\n\n| Tab | Panel | Live | Total | % |\n|---|---|---:|---:|---:|\n",
+        head.len(),
+        pct(head_live, head.len()),
+        catalog.len(),
+        pct(all_live, catalog.len()),
+        ids.len()
+    );
+    let mut groups: Vec<(String, String, usize, usize)> = Vec::new();
+    for e in &catalog {
+        let l = usize::from(live(e));
+        match groups.iter_mut().find(|g| g.0 == e.tab && g.1 == e.panel) {
+            Some(g) => {
+                g.2 += l;
+                g.3 += 1;
+            }
+            None => groups.push((e.tab.clone(), e.panel.clone(), l, 1)),
+        }
+    }
+    for (t, p, l, n) in &groups {
+        md += &format!("| {t} | {p} | {l} | {n} | {:.0}% |\n", pct(*l, *n));
+    }
+    md += "\n## Live (SOLID, SKETCH)\n\n";
+    for e in head.iter().filter(|e| live(e)) {
+        md += &format!("- {} › {} › {} (`{}`)\n", e.tab, e.panel, e.name, e.id);
+    }
+    md += "\n## Not yet (SOLID, SKETCH)\n\n";
+    for e in head.iter().filter(|e| !live(e)) {
+        md += &format!("- {} › {} › {} (`{}`)\n", e.tab, e.panel, e.name, e.id);
+    }
+    std::fs::write(root.join("docs/parity.md"), md).map_err(|e| format!("docs/parity.md: {e}"))?;
+    println!("parity: SOLID+SKETCH {head_live}/{} ({:.0}%), all tabs {all_live}/{} → docs/parity.md", head.len(), pct(head_live, head.len()), catalog.len());
+    Ok(())
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn catalog_from_menu_tree() {
+        let v: Value = serde_json::from_str(
+            r#"{"commandDefinitions":[{"id":"B","name":"Bee"}],"tabs":{"DesignProductType/SolidTab":{"panels":[{"name":"Create","controls":[
+                {"type":"CommandControl","id":"A","command":{"id":"A","name":"Aye"}},
+                {"type":"SeparatorControl","id":"s"},
+                {"type":"DropDownControl","id":"d","controls":[{"type":"CommandControl","id":"B","command":{"id":"B"}}]}]}]}}}"#,
+        )
+        .unwrap();
+        let e = from_menu_tree(&v);
+        assert_eq!(e.len(), 2);
+        assert_eq!((e[0].tab.as_str(), e[0].panel.as_str(), e[0].id.as_str(), e[0].name.as_str()), ("SOLID", "CREATE", "A", "Aye"));
+        assert_eq!(e[1].name, "Bee");
+        let tsv = "# c\nSOLID\tCREATE\tA\tAye\n";
+        assert_eq!(parse_catalog(tsv).len(), 1);
+    }
+}